Felsic fire-fountaining beneath Archean seas: pyroclastic deposits of the 2730 Ma Hunter Mine Group, Quebec, Canada

The lapilli tuff breccias (LTB-1 and LTB-2) of the Archean Hunter Mine Group in the south-central part of the Abitibi greenstone belt are inferred to be the product of subaqueous lava fountaining. Intercalated sub-wave base iron-formations, interstratified turbiditic tuffs, the absence of wave-induced sedimentary structures, and the stratigraphic position of lapilli tuff breccias beneath basaltic komatiites, support this contention. A complete eruptive sequence shows a tripartite division into (a) massive breccia, (b) stratified lapilli tuff, and (c) turbiditic tuff-lapilli tuff division. The massive breccia division is characterized by clusters of isolated and compressed irregular-shaped clasts inferred to be deposited directly from the hot magmatic lava fountain. Abundant vesicular pyroclasts with a vesicle content of up to 60% exhibit locally coalescing vesicles indicating bubble nucleation prior to eruption. The prevalence of irregular to amoeboid clast shapes suggests transport from the vent in a steamy-rich, high-density current to the site under a self-generated steam cupola. Ubiquitous subequant lapilli-size pyroclasts of the stratified lapilli tuff division suggest that significant ingress of water into the fountain changed the prevalent fragmentation process from magmatic to hydrovolcanic. The turbiditic tuff-lapilli tuff division composed of pumice, lithic fragments and vitric ash is envisaged to have formed by gravitational collapse of a subaqueous turbulent eruptive plume. This type of eruptive mechanism constituted a minor but important process of volcanic construction on the ocean floor during the Archean, and possibly during incipient arc and backarc formation in modern day settings.     

Evolution of tuff ring-dome complex: the case study of Cerro Pinto, eastern Trans-Mexican Volcanic Belt

Cerro Pinto is a Pleistocene rhyolite tuff ring-dome complex located in the eastern Trans-Mexican Volcanic Belt. The complex is composed of four tuff rings and four domes that were emplaced in three eruptive stages marked by changes in vent location and eruptive character. During Stage I, vent clearing produced a 1.5-km-diameter tuff ring that was then followed by emplacement of two domes of approximately 0.2 km³ each. With no apparent hiatus in activity, Stage II began with the explosive formation of a tuff ring ~2 km in diameter adjacent to and north of the earlier ring. Subsequent Stage II eruptions produced two smaller tuff rings within the northern tuff ring as well as a small dome that was mostly destroyed by explosions during its growth. Stage III involved the emplacement of a 0.04 km³ dome within the southern tuff ring. Cerro Pinto’s eruptive history includes sequences that follow simple rhyolite-dome models, in which a pyroclastic phase is followed immediately by effusive dome emplacement. Some aspects of the eruption, however, such as the explosive reactivation of the system and explosive dome destruction, are more complex. These events are commonly associated with polygenetic structures, such as stratovolcanoes or calderas, in which multiple pulses of magma initiate reactivation. A comparison of major and trace element geochemistry with nearby Pleistocene silicic centers does not show indication of any co-genetic relationship, suggesting that Cerro Pinto was produced by a small, isolated magma chamber. The compositional variation of the erupted material at Cerro Pinto is minimal, suggesting that there were not multiple pulses of magma responsible for the complex behavior of the volcano and that the volcanic system was formed in a short time period. The variety of eruptive style observed at Cerro Pinto reflects the influence of quickly exhaustible water sources on a short-lived eruption. The rising magma encountered small amounts of groundwater that initiated eruption phases. Once a critical magma:water ratio was exceeded, the eruptions became dry and sub-plinian to plinian. The primary characteristic of Cerro Pinto is the predominance of fall deposits, suggesting that the level at which rising magma encountered water was deep enough to allow substantial fragmentation after the water source was exhausted. Isolated rhyolite domes are rare and are not currently viewed as prominent volcanic hazards, but the evolution of Cerro Pinto demonstrates that individual domes may have complex cycles, and such complexity must be taken into account when making hazard risk assessments.     

Evolution of a complex isolated dome system,Cerro Pizarro,central México

Cerro Pizarro is an isolated rhyolitic dome in the intermontane Serdán-Oriental basin, located in the eastern Trans-Mexican Volcanic Belt. Cerro Pizarro erupted ~1.1 km³ of magma at about 220 ka. Activity of Cerro Pizarro started with vent-clearing explosions at some depth; the resultant deposits contain clasts of local basement rocks, including Cretaceous limestone, ~0.46-Ma welded tuff, and basaltic lava. Subsequent explosive eruptions during earliest dome growth produced an alternating sequence of surge and fallout layers from an inferred small dome. As the dome grew both vertically and laterally, it developed an external glassy carapace due to rapid chilling. Instability of the dome during emplacement caused the partial gravitational collapse of its flanks producing various block-and-ash-flow deposits. After a brief period of repose, re-injection of magma caused formation of a cryptodome with pronounced deformation of the vitrophyric dome and the underlying units to orientations as steep as near vertical. This stage began apparently as a gas-poor eruption and no explosive phases accompanied the emplacement of the cryptodome. Soon after emplacement of the cryptodome, however, the western flank of the edifice catastrophically collapsed, causing a debris avalanche. A hiatus in eruptive activity was marked by erosion of the cone and emplacement of ignimbrite derived from a caldera to the north of Cerro Pizarro. The final growth of the dome growth produced its present shape; this growth was accompanied by multiple eruptions producing surge and fallout deposits that mantle the topography around Cerro Pizarro. The evolution of the Cerro Pizarro dome holds aspects in common with classic dome models and with larger stratovolcano systems. We suggest that models that predict a simple evolution for domes fail to account for possibilities in evolutionary paths. Specifically, the formation of a cryptodome in the early stages of dome formation may be far more common than generally recognized. Likewise, sector collapse of a dome, although apparently rare, is a potential hazard that must be recognized and for which planning must be done.Editorial responsibility: J. Gilbert     

The submarine eruption of the Bombarda volcano,Milos Island,Cyclades, Greece

The Milos volcanic field includes a well-exposed volcaniclastic succession which records a long history of submarine explosive volcanism. The Bombarda volcano, a rhyolitic monogenetic center, erupted ∼1.7 Ma at a depth <200 m below sea level. The aphyric products are represented by a volcaniclastic apron (up to 50 m thick) and a lava dome. The apron is composed of pale gray juvenile fragments and accessory lithic clasts ranging from ash to blocks. The juvenile clasts are highly vesicular to non-vesicular; the vesicles are dominantly tube vesicles. The volcaniclastic apron is made up of three fades: massive to normally graded pumice-lithic breccia, stratified pumice-lithic breccia, and laminated ash with pumice blocks. We interpret the apron beds to be the result of water-supported, volcaniclastic mass-How emplacement, derived directly from the collapse of a small-volume, subaqueous eruption column and from syn-eruptive, down-slope resedimentation of volcaniclastic debris. During this eruptive phase, the activity could have involved a complex combination of phreatomagmatic explosions and minor submarine effusion. The lava dome, emplaced later in the source area, is made up of flow-banded lava and separated from the apron by an obsidian carapace a few meters thick. The near-vertical orientation of the carapace suggests that the dome was intruded within the apron. Remobilization of pyroclastic debris could have been triggered by seismic activity and the lava dome emplacement. Published online: 30 January 2003 Editorial responsibility: J. McPhie     

Coeval strombolian and vulcanian-type explosive eruptions at Panarea (Aeolian Islands,Southern Italy)

In this paper, we document the evolution of the emergent Panarea dome in the Aeolian islands (Southern Italy), placing particular emphasis on the reconstruction of the explosive events that occurred during the final stage of its evolution. Two main pyroclastic successions exposing fall deposits with different compositions have been studied into detail: the andesitic Palisi succession and the basaltic Punta Falcone succession. The close-in-time deposition of the two successions, the dispersal area and grain-size distribution of the deposits account for their attribution to vents located in the western sector of the present island and erupting almost contemporaneously. Vents could have been aligned along NNE-trending regional fracture systems controlling the western flank of the dome and possibly its collapse. Laboratory analyses have been devoted to the characterization of the products of the two successions that have been ascribed to vulcanian- and to strombolian-type eruptions respectively. The vulcanian eruption started with a vent-clearing phase that occurred by sudden decompression of a pressurized magma producing ballistic bombs and a surge blast and the development of a vulcanian plume. Vulcanian activity was almost contemporaneous to strombolian-type fall-out eruptions. The coeval occurrence of basaltic and andesitic eruptions from close vents and the presence of magmatic basaltic enclaves in the final dacitic lava lobe of the dome allow us to speculate that the intrusion of a basaltic dyke played a major role in triggering explosive eruptions. The final explosive episodes may have been caused by extensional tectonics fracturing the roof of a zoned shallow magma chamber or by the intrusion of a new basaltic magma into a more acidic and shallow reservoir. Intrusion most likely occurred through the injection of dykes along the western cliff of the present Panarea Island inducing the collapse of the western sector of the dome.     

Silicic lava dome growth in the 1934–1935 Showa Iwo-jima eruption, Kikai caldera, south of Kyushu, Japan

The 1934–1935 Showa Iwo-jima eruption started with a silicic lava extrusion onto the floor of the submarine Kikai caldera and ceased with the emergence of a lava dome. The central part of the emergent dome consists of lower microcrystalline rhyolite, grading upward into finely vesicular lava, overlain by coarsely vesicular lava with pumice breccia at the top. The lava surface is folded, and folds become tighter toward the marginal part of the dome. The dome margin is characterized by two zones: a fracture zone and a breccia zone. The fracture zone is composed of alternating layers of massive lava and welded oxidized breccia. The breccia zone is the outermost part of the dome, and consists of glassy breccia interpreted to be hyaloclastite. The lava dome contains lava with two slightly different chemical compositions; the marginal part being more dacitic and the central part more rhyolitic. The fold geometry and chemical compositions indicate that the marginal dacite had a slightly higher temperature, lower viscosity, and lower yield stress than the central rhyolite. The high-temperature dacite lava began to effuse in the earlier stage from the central crater. The front of the dome came in contact with seawater and formed hyaloclastite. During the later stage, low-temperature rhyolite lava effused subaerially. As lava was injected into the growing dome, the fracture zone was produced by successive fracturing, ramping, and brecciation of the moving dome front. In the marginal part, hyaloclastite was ramped above the sea surface by progressive increments of the new lava. The central part was folded, forming pumice breccia and wrinkles. Subaerial emplacement of lava was the dominant process during the growth of the Showa Iwo-jima dome.Editorial Responsibility J. McPhie     

The rhyolitic–andesitic eruptive history of Cotopaxi volcano,Ecuador

At Cotopaxi volcano, Ecuador, rhyolitic and andesitic bimodal magmatism has occurred periodically during the past 0.5 Ma. The sequential eruption of rhyolitic (70–75% SiO₂) and andesitic (56–62% SiO₂) magmas from the same volcanic vent over short time spans and without significant intermingling is characteristic of Cotopaxi’s Holocene behavior. This study documents the eruptive history of Cotopaxi volcano, presenting its stratigraphy and geologic field relations, along with the relevant mineralogical and chemical nature of the eruptive products, in order to determine the temporal and spatial relations of this bimodal alternation. Cotopaxi’s history begins with the Barrancas rhyolite series, dominated by pumiceous ash flows and regional ash falls between 0.4 and 0.5 Ma, which was followed by occasional andesitic activity, the most important being the ample andesitic lava flows (∼4.1 km³) that descended the N and NW sides of the edifice. Following a ∼400 ka long repose without silicic activity, Cotopaxi began a new eruptive phase about 13 ka ago that consisted of seven rhyolitic episodes belonging to the Holocene F and Colorado Canyon series; the onset of each episode occurred at intervals of 300–3,600 years and each produced ash flows and regional tephra falls with DRE volumes of 0.2–3.6 km³. Andesitic tephras and lavas are interbedded in the rhyolite sequence. The Colorado Canyon episode (4,500 years BP) also witnessed dome and sector collapses on Cotopaxi’s NE flank which, with associated ash flows, generated one of the largest cohesive debris flows on record, the Chillos Valley lahar. A thin pumice lapilli fall represents the final rhyolitic outburst which occurred at 2,100 years BP. The pumices of these Holocene rhyolitic eruptions are chemically similar to those of older rhyolites of the Barrancas series, with the exception of the initial eruptive products of the Colorado Canyon series whose chemistry is similar to that of the 211 ka ignimbrite of neighboring Chalupas volcano. Since the Colorado Canyon episode, andesitic magmatism has dominated Cotopaxi’s last 4,400 years, characterized by scoria bomb and lithic-rich pyroclastic flows, infrequent lava flows that reached the base of the cone, andesitic lapilli and ash falls that were carried chiefly to the W, and large debris flows. Andesitic magma emission rates are estimated at 1.65 km³ (DRE)/ka for the period from 4,200 to 2,100 years BP and 1.85 km³ (DRE)/ka for the past 2,100 years, resulting in the present large stratocone.     

Subaqueous eruption and emplacement of the Shinjima Pumice, Shinjima (Moeshima) Island, Kagoshima Bay, SW Japan

The Shinjima Pumice is a fines-depleted pumice lapilli tuff emplaced several thousands years ago at about 100–140 m below sea level. This 40-m-thick deposit comprises many poorly defined flow units, which are 1–10 m thick, diffusely stratified and showing upward-coarsening of pumice clasts with a sharp to transitional base. Parallel to wavy diffuse stratifications are commonly represented by alignment of pumice clasts, especially in the lower half of the flow units. Pumice clasts of block to coarse-lapilli size commonly have thermal-contraction cracks best developed on the surfaces, demonstrating that they were hot but cooled down to the ambient temperatures prior to their emplacement. These features are suggestive of the direct origin of the Shinjima Pumice from subaqueous eruptions. A theoretical consideration on the behavior of subaqueous eruption plumes and hot and cold pumice clasts suggests that subaqueous eruption plumes commonly collapse by turbulent mixing with the ambient water and are transformed into water-logged mass flows.     

Geological structure of hydrothermal fields in the taupo volcanic zone,New Zealand

Wairakei hydrothermal field is underlain by an acid volcanic sequence consisting of the following units: Recent pumice cover, Wairakei Breccia, Huka Falls Formation, Haparangi Rhyolite, Waiora Formation, Waiora Valley Andesite, Wairakei Ignimbrites, Ohakuri Group. The stratified volcanic sequence is draped over a basement horst and thickens eastward and westward into adjoining volcanotectonic depressions. These major depressions have grown progressively during the Quaternary by differential subsidence along active faults and were not the direct result of collapse following major ignimbrite and rhyolite eruptions. The bulk of the steam production is obtained from a thick aquifer of pumice breccias (Waiora aquifer), which is capped by lacustrine shales of the Huka Falls Formation. The best production is obtained from fault zones intersecting the lower part of this aquifer. The Ohakuri Group, underlying the Wairakei Ignimbrites, constitutes a lower, pumice breccia aquifer, not yet directly exploited by drill-holes. Hydrothermal water at 265°C is fed from the lower to the upper aquifer through linear fissures in the Wairakei Ignimbrites, principally at the cress of a small structural dome. These fissures are related to active, north-east striking, normal faults, having a small dextral transcurrent component. Major zones of heat liberation have been localised at the intersection of secondary, north-west cross faults. Fossil, hydrothermal, mud-flow, conglomerates intercalated in the mid-Pleistocene Huka Falls Formation, suggest that hydrothermal activity at Wairakei is at least 500,000 years old. Isopachs on the early Pleistocene Waiora Valley Andesite indicate that the andesite plug and associated flows were crupted at the same fault intersections, now controlling heat flow into the Waiora aquifer. The inferred great age of the hydrothermal system poses problems in maintaining heat flow, and a model of a large, semi-permanent granitic batholith leaking super-critical hydrothermal fluids up active fault zones to heat near-surface aquifers of meteoric water is proposed. Temperature and pressure equilibria of such a magma body may be maintained by gaseous diffusion. Structural and heat flow evidence suggest that the most probable location of the magma body is to the south of the hydrothermal field below a large, late Pleistocene, rhyolitic eruptive centre. Other hydrothermal fields in the Taupo Volcanic Zone — Orakeikorako, Waiotapu and Kawerau — have similar geological sequences and structures to Wairakei. Important features in common include:

1. 1)
   Proximity to a late Pleistocene, rhyolitic eruptive centre typified by ignimbrites, non-welded ash flows and rhyolite domes and sills, which is considered to directly overlie a large, semipermanent magma chamber.     
   
   

History and mechanism of eruption of soda-rhyolite and alkali basalt,Socorro Island,Mexico

Socorro Island is the summit of a large volcanic mountain located on the Clarion Fracture Zone in the east Pacific. Two major periods of volcanic activity can be recognized on the island. The first (pre-caldera) period was characterized by eruptions of olivine-poor alkali basalt, followed by quiet effusion of soda rhyolite including varieties transitional to pantellerite. This period of activity terminated with the formation of a caldera by collapse. A relatively prolonged period of quiescence ended with rifting and down-faulting of the western side of the island along a north-south fracture system, accompanied by violently explosive eruptions of soda rhyolite which built a large tephra cone over the position of the old caldera. The locus of eruptive activity moved outward and downward along tension fractures and old tectonic rifts as the central vents became blocked by domes of dense obsidian. Low level eruptions of viscous soda rhyolite including pantellerite commenced without preliminary explosive eruptions and built numerous endogenous and exogenous domes. Basaltic eruptions were rare and confined to low-level vents. During the growth of the volcano the direction of active rifting appears to have changed from east-west to northwest-southeast to north-south. Little is known of the submarine portion of the volcano, but the topography seems to reflect the three directions of rifting. The oldest submarine lavas are assumed to be basaltic and are probably of late Tertiary age. The eruptive history of Socorro suggests that the underlying magma column became stratified toward the end of the active period.     

Petrologic and structural contrast of the quaternary volcanoes of Guatemala

An imposing chain of volcanoes that forms a narrow belt parallel to the Pacific coast of Guatemala displays a variety of petrologic and eruptive features that appear to be related to differences in their structural environment. In western Guatemala most of the volcanoes are large composite cones of pyroxene andesite that bear only a few parasitic cones of basaltic cinders on their flanks. However, many of the volcanoes, during their later stages of growth, discharged immense volumes of dacite pumice from their summit vents, and some of them erupted domes of viscous andesite and more siliceous lavas far down their slopes. The huge cauldron of Lake Atitlan and the Krakatoan-type caldera of Lake Ayarza were formed by subsidence related to voluminous eruptions of lava and pumice. In eastern Guatemala, however, most of the volcanoes consist mainly or wholly of basalt; minor basaltic cones are unsually abundant, both as parasites and as independent, short-lived forms alined along faults. The volcanoes, instead of being restricted to a narrow belt, are widely scattered along fissure systems, many of which trend north south. Although dacite pumice is relatively scarce, some of the largest flows of rhyolitic obsidian on the continent are found here where they are closely associated in time and place with olivine-rich basalts. This intimate basalt-rhyolite association, the only one of its kind known in Central America, appears to represent a late stage of extreme fractional crystallization of a large body of basaltic magma.     

Volcán Las Navajas,a Pliocene-Pleistocene trachyte/peralkaline rhyolite volcano in the northwestern Mexican volcanic belt

Volcán Las Navajas, a Pliocene-Pleistocene volcano located in the northwestern portion of the Mexican volcanic belt, erupted lavas ranging in composition from alkali basalt through peralkaline rhyolite, and is the only volcano in mainland Mexico known to have erupted pantellerites. Las Navajas is located near the northwestern end of the Tepic-Zacoalco rift and covers a 200-m-thick pile of alkaline basaltic lavas, one of which has been dated at 4.3 Ma. The eruptive history of the volcano can be divided into three stages separated by episodes of caldera formation. During the first stage a broad shield volcano made up of alkali basalts, mugearites, benmoreites, trachytes, and peralkaline rhyolites was constructed. Eruption of a chemically zoned ash flow then caused collapse of the structure to form the first caldera. The second stage consisted of eruptions of glassy pantellerite lavas that partially filled the caldera and overflowed its walls. This stage ended about 200 000 years ago with the eruption of pumice falls and ash flows, which led to the collapse of the southern portion of the volcano to form the second caldera. During the third stage, two benmoreite cinder cones and a benmoreite lava flow were emplaced on the northwestern flank of the volcano. Finally, the calc-alkaline volcano Sanganguey was built on the southern flank of Las Lavajas. Alkaline volcanism continued in the area with eruptions of alkali basalt from cinder cones located along NW-trending fractures through the area. Although other mildly peralkaline rhyolites are found in the rift zones of western Mexico, only Las Navajas produced pantellerites. Greater volumes of basic alkaline magma have erupted in the Las Navajas region than in the other areas of peralkaline volcanism in Mexico, a factor which may be necessary to provide the initial volume of material and heat to drive the differentiation process to such extreme peralkaline compositions.     

Collapse mechanism of the Paleogene Sakurae cauldron, SW Japan

The Paleogene Sakurae cauldron of SW Japan is characterized by a nested structure with a polygonal outline (21×13 km²) including a circular collapsed part (5 km in diameter). Total thickness of the caldera infill amounts to 2,000 m. The lower member of the infill consists mainly of felsic crystal tuff and lesser intercalated andesitic lava flows, whereas the upper member is composed of high-grade ignimbrite capped with a large rhyolitic lava dome. These members represent the first and second stage eruptions, respectively. Faults bounding the cauldron rim comprise intersecting radial and concentric faults, producing the polygonal outline of this cauldron. The primary collapse of this cauldron thus occurred as a polygonal caldera basin where products of the first stage eruption accumulated. In contrast, the inner collapse part is defined by a ring fracture system. This sector subsided concurrently with accumulation of the high-grade ignimbrite of the second stage eruption. This inner circular collapse thus represents syn-eruptional subsidence concurrent with the climactic eruption. Magma drainage during the first stage probably induced outward-dipping ring fractures in the chamber roof. Opening of the ring fractures following subsidence of the central bell-jar block caused rapid evacuation of magma as voluminous pumice flows, even though magma pressure may have decreased to some degree.     

Volcanoes of the Cape Hoskins area,New Britain,territory of Papua and New Guinea

One active and ten extinct Quaternary volcanoes are described from the Cape Hoskins area, on the north coast of New Britain. They are mostly strato volcanoes built up of lava flows, lava domes, pyroclastic flows, lahars, tephra, and derived alluvial sediments. The volcanic products range in composition from basalt to rhyolite, but basaltic andesite and andesite predominate. Much of the area is covered by tephra, several metres thick, consisting mainly of rhyolitic pumice. The active volcano, Pago, is built up of several glacier-like lava flows, the last of which was formed during an eruption in 1914–18. Pago lies within a well-preserved caldera forming the central part of a broad low-angle cone, named Witori, which consists largely of welded and unwelded pyroclastic flow deposits. C-14 dates obtained on charcoal indicate that the caldera eruption occurred about 2500 years B. P. Another caldera of similar age lies south of Witori. Of the other eight volcanoes described four are relatively well-preserved steep-sided cones formed mainly of lava flows, one is a remnant of a low-angle cone with a caldera, and three are deeply eroded cones which have none of their constructional surfaces preserved.     

A tertiary silicic cauldron complex at the northern margin of the basin and range province,central Arizona,U.S.A.

The Superior volcanic field occupies approximately 8,000 square kilometers of central Arizona in the zone between the southern Basin and Range Province and the Colorado Plateaus Province. The primary structural elements of an eruptive center in the western part of this field are: 1) volcanic plateau, 2) ring fracture zone, and 3) resurgent caldera core. A northwest trending graben controls the location of three small subsided blocks, the Willow Springs cauldron (2 km diameter), the Black Mesa cauldron (4 km diameter), and the Florence Junction cauldron (8 km diameter), which were centers for rhyolite ash and lava eruption. These late features are superimposed on a much larger volcano-tectonic structure, the Superstition resurgent cauldron which subsided at an earlier stage following the extrusion of quartz latite welded tuff. The history of the volcanic center is as follows: An early ring of dacite domes of up to 900 meters in relief formed a semi-circular are 7 km in diameter on the western margin of the caldera. The last phases of dome building were contemporaneous with the extrusion of a vast quartz latite welded tuff (22.6 m.y.). The plateau formed by the welded tuff collapsed to a maximum depth of 800 meters along a northwest trending graben which is the locus of three small cauldrons. These late cauldrons were the source of rhyolitic magma which produced non-welded ash flows, lava (21 m.y.), and a thick sequence of epiclastic breccias. The rhyolitic volcanism was followed by intrusion of domes and extrusion of glassy lavas (20 m.y.) of quartz latite composition in a 270° are 16 km in diameter concentric to the arc of older dacite domes. Following deposition of the epiclastic breccia and intrusion of the ring fracture dikes was the extrusion of mafic lava (18 m.y.) into low places in the graben. The mafic lava composition ranges from basalt to basanite.     

A transition from strombolian to phreatomagmatic activity induced by a lava flow damming water in a valley

The Golan Heights is a Plio-Pleistocene volcanic plateau. Cinder cones of Late Pleistocene age are very common in the eastern and northern Golan, while phreatomagmatic deposits are relatively rare and occur just in two structures — the maar of Birket Ram and the tuff ring of Mt. Avital. The complex of Mt. Avital includes two large cinder cones, a tuff ring with an elongated central depression and several basaltic flows, some of them breach the cinder cones. The (exposed) eruptive history of the complex includes (1) an early stage of basaltic lava flows, (2) strombolian activity and the buildup of the southern cinder cone, (3) a second stage of basaltic flows and the buildup of the northern cinder cone, and then a transition to (4) phreatomagmatic explosions. The phreatomagmatic deposits include surges, lapilli fallout deposits and coarse-grained lithic tuff breccias, which were found up to 200 m above the central depression. Basaltic and scoriaceous clasts are the main component of all deposits, while juvenile material is usually a minor component, almost absent in the lapilli deposits.It is suggested that the phreatomagmatic events in Mt. Avital were induced by the infiltration of water from a lake that existed in a nearby topographic low (Quneitra Valley). The lake was formed or significantly expanded at about 300 ka due to a lava flow that blocked the drainage of the valley to the west. The interlayering of tuff and scoria at the top of the northern cinder cone and the good preservation of a lava flow top breccia under the surges imply that the phreatomagmatic activity immediately followed and even coincided with the last stages of strombolian activity. It is suggested that the dry–wet transition was triggered by the effusion of the second stage lavas and the buildup of the northern cinder cone, which probably caused a reduction of pressure in the magmatic system and allowed the lake water an access to the magmatic system. The minimum age of the phreatomagmatic events is determined by a 54 ka Musterian site which lies directly on top of the tuff in the Quneitra Valley.     

Reconstruction of the eruptive history of Usu volcano,Hokkaido, Japan,inferred from petrological correlation between tephras and dome lavas

Usu volcano has erupted nine times since 1663. Most eruptive events started with an explosive eruption, which was followed by the formation of lava domes. However, the ages of several summit lava domes and craters remain uncertain. The petrological features of tephra deposits erupted from 1663 to 1853 are known to change systematically. In this study, we correlated lavas with tephras under the assumption that lava and tephra samples from the same event would have similar petrological features. Although the initial explosive eruption in 1663 was not accompanied by lava effusion, lava dome or cryptodome formation was associated with subsequent explosive eruptions. We inferred the location of the vent associated with each event from the location of the associated lava dome and the pyroclastic flow deposit distribution and found that the position of the active vent within the summit caldera differed for each eruption from the late 17th through the 19th century. Moreover, we identified a previously unrecognized lava dome produced by a late 17th century eruption; this dome was largely destroyed by an explosive eruption in 1822 and was replaced by a new lava dome during a later stage of the 1822 event at nearly the same place as the destroyed dome. This new interpretation of the sequence of events is consistent with historical sketches and documents. Our results show that petrological correlation, together with geological evidence, is useful not only for reconstructing volcanic eruption sequences but also for gaining insight into future potential disasters.     

Record of complex scoria cone eruptive activity at Red Mountain,Arizona, USA,and implications for monogenetic mafic volcanoes

Scoria cone eruptions are generally modeled as a simple succession from explosive eruption to form the cone to passive effusion of lava, generally from the base of the cone. Sector collapse of scoria cones, wherein parts of the cone are rafted on a lava flow, is increasingly recognized as common, but the reasons that a cone may not be rebuilt are poorly understood.     

Two examples of subaqueously welded ash-flow tuffs: the Visean of southern Vosges (France) and the Upper Cretaceous of northern Anatolia (Turkey)

Pyroclastic deposits interpreted as subaqueous ash-flow tuff have been recognized within Archean to Recent marine and lacustrine sequences. Several authors proposed a high-temperature emplacement for some of these tuffs. However, the subaqueous welding of pyroclastic deposits remains controversial.The Visean marine volcaniclastic formations of southern Vosges (France) contain several layers of rhyolitic and rhyodacitic ash-flow tuff. These deposits include, from proximal to distal settings, breccia, lapilli and fine-ash tuff. The breccia and lapilli tuff are partly welded, as indicated by the presence of fiamme, fluidal and axiolitic structures. The lapilli tuff form idealized sections with a lower, coarse and welded unit and an upper, bedded and unwelded fine-ash tuff. Sedimentary structures suggest that the fine-ash tuff units were deposited by turbidity currents. Welded breccias, interbedded in a thick submarine volcanic complex, indicate the close proximity of the volcanic source. The lapilli and fine-ash tuff are interbedded in a thick marine sequence composed of alternating sandstones and shales. Presence of a marine stenohaline fauna and sedimentary structures attest to a marine depositional environment below storm-wave base.In northern Anatolia, thick massive sequences of rhyodacitic crystal tuff are interbedded with the Upper Cretaceous marine turbidites of the Mudurnu basin. Some of these tuffs are welded. As in southern Vosges, partial welding is attested by the presence of fiamme and fluidal structures. The latter are frequent in the fresh vitric matrix. These tuff units contain a high proportion of vitroclasis, and were emplaced by ash flows. Welded tuff units are associated with non-welded crystal tuff, and contain abundant bioclasts which indicate mixing with water during flowage. At the base, basaltic breccia beds are associated with micritic beds containing a marine fauna. The welded and non-welded tuff sequences are interbedded in an alternation of limestones and marls. These limestones are rich in pelagic microfossils.The evidence above strongly suggest that in both examples, tuff beds are partly welded and were emplaced at high temperature by subaqueous ash flows in a permanent marine environment. The sources of the pyroclastic material are unknown in both cases. We propose that the ash flows were produced during submarine fissure eruptions. Such eruptions could produce non-turbulent flows which were insulated by a steam carapace before deposition and welding. The welded ash-flow tuff deposits of southern Vosges and northern Anatolia give strong evidence for existence of subaqueous welding.     

The dali ash,island of rhodes,greece: a problem in interpreting submarine volcanigenic sediments

In the southern part of Rhodes, Greece, rhyolitic subaqueous pyroclastic deposits are interbedded with Tertiary, deep water, marine sediments. The lowermost and best exposed of these deposits — the Dali Ash — is described here. The deposit has been previously described as a deep water welded subaqueous ignimbrite. This paper shows that there is no evidence of welding, and texture previously reported were misidentified. The Dali Ash consists of a lower massive unit (5 m thick), overlain by a sequence of ash-turbidites (2.5 m thick). The lower unit was deposited by a high concentration turbidity current and the ash-turbidites by dilute turbidity currents. Foraminifera are dispersed throughout the deposit and indicate that all the sedimentary gravity flows were cold water/particulate systems. A palaeomagnetic study also suggests they were deposited cold. The Dali Ash can be interpreted as the lateral equivalent of a subaerial pumiceous pyroclastic flow deposit (ignimbrite). The ash-turbidites then may be redeposited slumps off the submarine slope of the lower massive unit, or, may represent later, smaller pyroclastic flows in the eruption. Other alternatives for the origin of the Dali Ash are fully discussed to show the problems in interpreting submarine volcanigenic sediments. It is possible that the deposits are not even a primary eruptive product and are remobilized pyroclastic debris, slumped, for example, off the sides of a shallow marine rhyolitic tuff ring.