Isotopic constraints on growth conditions of multiphase calcite–pyrite–barite concretions in Carboniferous mudstones

Carbonate concretions in the Lower Carboniferous Caton Shale Formation contain diagenetic pyrite, calcite and barite in the concretion matrix or in different generations of septarian fissures. Pyrite was formed by sulphate reduction throughout the sediment before concretionary growth, then continued to form mainly in the concretion centres. The septarian calcites show a continuous isotopic trend from δ¹³C=?28·7‰ PDB and δ¹⁸O=?1·6‰ PDB through to δ¹³C=?6·9‰ PDB and δ¹⁸O=?14·6‰ PDB. This trend arises from (1) a carbonate source initially from sulphate reduction, to which was added increasing contributions of methanogenic carbonate; and (2) burial/temperature effects or the addition of isotopically light oxygen from meteoric water. The concretionary matrix carbonates must have at least partially predated the earliest septarian cements, and thus used the same carbonate sources. Consequently, their isotopic composition (δ¹³C=?12·0 to ?10·1‰ PDB and δ¹⁸O=?5·7 to ?5·6‰ PDB) can only result from mixing a carbonate cement derived from sulphate reduction with cements containing increasing proportions of carbonate from methanogenesis and, directly or indirectly, also from skeletal carbonate. Concretionary growth was therefore pervasive, with cements being added progressively throughout the concretion body during growth. The concretions contain barite in the concretion matrix and in septarian fissures. Barite in the earlier matrix phase has an isotopic composition (δ³⁴S=+24·8‰ CDT and δ¹⁸O=+16·4‰ SMOW), indicating formation from near‐surface, sulphate‐depleted porewaters. Barites in the later septarian phase have unusual isotopic compositions (δ³⁴S=+6 to +11‰ CDT and δ¹⁸O=+8 to +11‰ SMOW), which require the late addition of isotopically light sulphate to the porewaters, either from anoxic sulphide oxidation (using ferric iron) or from sulphate dissolved in meteoric water. Carbon isotope and biomarker data indicate that oil trapped within septarian fissures was derived from the maturation of kerogen in the enclosing sediments.     

Carbon and Oxygen Isotope Compositions of Calcite and Rhodochrosite from Geothermal Exploratory Drills TH‐4 and TH‐6 near the Toyoha Deposit,Hokkaido, Japan

We studied calcite and rhodochrosite from exploratory drill cores (TH‐4 and TH‐6) near the Toyoha deposit, southwestern Hokkaido, Japan, from the aspect of stable isotope geochemistry, together with measuring the homogenization temperatures of fluid inclusions. The alteration observed in the drill cores is classified into four zones: ore mineralized zone, mixed‐layer minerals zone, kaolin minerals zone, and propylitic zone. Calcite is widespread in all the zones except for the kaolin minerals zone. The occurrence of rhodochrosite is restricted in the ore mineralized zone associated with Fe, Mn‐rich chlorite and sulfides, the mineral assemblage of which is basically equivalent to that in the Toyoha veins. The measured δ¹⁸O_SMOW and δ¹³C_PDB values of calcite scatter in the relatively narrow ranges from ?2 to 5‰ and from ?9 to ?5‰, respectively; those of rhodochrosite from 3 to 9‰ and from ?9 to ?5‰, excluding some data with large deviations. The variation of the isotopic compositions with temperature and depth could be explained by a mixing process between a heated surface meteoric water (100°C δ¹⁸O =?12‰, δ¹³C =?10‰) and a deep high temperature water (300°C, δ¹⁸O =?5‰, δ¹³C =?4‰). Boiling was less effective in isotopic fractionation than that of mixing. The plots of δ¹⁸O and δ¹³C indicate that the carbonates precipitated from H₂CO₃‐dominated fluids under the conditions of pH = 6–7 and T = 200–300°C. The sequential precipitation from calcite to rhodochrosite in a vein brought about the disequilibrium isotopic fractionation between the two minerals. The hydrothermal fluids circulated during the precipitation of carbonates in TH‐4 and TH‐6 are similar in origin to the ore‐forming fluids pertaining to the formation of veins in the Toyoha deposit.     

Fibrous calcite from the Ordovician of Tennessee: preservation of marine oxygen isotopic composition and its implications

Three categories of fibrous calcite from early to middle Caradoc platform-marginal buildups in east Tennessee can be delineated using cathodoluminescent microscopy, minor element chemistry and stable C-O isotopic composition. Bright luminescent fibrous cement has elevated Mn (>1000 p.p.m.), negative δ¹³C and intermediate δ¹⁸O values relative to other types of fibrous calcite. This cement reflects fibrous calcite that interacted with reducing Mn-rich fluids. Dully luminescent fibrous cement has elevated Fe (>400 p.p.m.), positive δ¹³C and negative δ¹⁸O values relative to other fibrous cements. This cement was stabilized by burial fluids. Nonluminescent fibrous cement has low Mn and Fe (generally below 400 p.p.m.) and positive δ¹³C and δ¹⁸O values relative to other types of fibrous calcite. The latter cement is interpreted to be the best material for determining the isotopic composition of calcite precipitated in equilibrium with early to middle Caradoc seawater, which is δ¹³C=1% PDB and δ¹⁸O=?4 to ?5‰ PDB. Results from this study and Ashgillian brachiopods indicate that the average δ¹⁸O composition of the Ordovician ocean, during nonglacial periods, was probably never more negative than ?3‰ SMOW. Assuming an Ordovician seawater δ¹⁸O value of ?1‰ SMOW, Holston Formation fibrous cements would have precipitated at temperatures between 27 and 36 °C, which is near the upper temperature limit for metazoans. A seawater δ¹⁸O value of ?2‰ SMOW yields temperatures ranging from 23 to 31 °C, while a ?3‰ SMOW value yields temperatures of 18–26 °C.     

Ordovician low- to intermediate-Mg calcite marine cements from Sweden: marine alteration and implications for oxygen isotopes in Ordovician seawater

Petrography demonstrates the presence of three types of fibrous calcite cement in buildup deposits of the Kullsberg Limestone (middle Caradoc), central Sweden. Translucent fibrous calcite has intrinsic blue luminescence (CL) indicative of pure calcite. This cement has 2–5 mol% MgCO₃, low Mn and Fe (≤ 100 p.p.m.), and is considered to be slightly altered to unaltered, primary low- to intermediate-Mg calcite. Grey turbid fibrous calcite has variable but generally low MgCO₃ content (most analyses <2 mol%) and variable CL response, with Mn and Fe concentrations up to 1200 and 500 p.p.m., respectively. The heterogeneous characteristics of this variety of fibrous calcite are caused by diagenetic alteration of a translucent fibrous calcite precursor. Light-brown turbid fibrous calcite has low MgCO₃ (near 1 mol%) and variable Mn (up to 800 p.p.m.) and Fe (up to 500 p.p.m.) concentrations, with an abundance of bright luminescent patches, which formed during alteration caused by reducing diagenetic fluids. The δ¹³C and δ¹⁸O values of all fibrous calcite form a tight field (δ¹³C=1·7 to 3·1‰ PDB, δ¹⁸O= ? 2·6 to ? 4·1‰ PDB) compared with fibrous calcite isotope values from other units. Fibrous calcite δ¹⁸O values are larger than adjacent meteoric or burial cements, which have δ¹⁸O δ ? 8‰ PDB. Consequently, most diagenetic alteration of Kullsberg fibrous calcite is interpreted to have occurred in the marine diagenetic realm. First-generation equant and bladed calcite cements, which pre-date fibrous calcite, are interpreted as unaltered, low-Mg calcite marine cements based on δ¹³C and δ¹⁸O data (δ¹³C = 2·3 to 2·7‰ PDB, δ¹⁸O= ? 2·8 to ? 3·5‰ PDB). Unlike fibrous cement, which reflects global sea water chemistry, first-generation equant and bladed calcite are indicators of localized modification of seawater chemistry in restricted settings. Kullsberg abiotic marine cements have larger δ¹⁸O values than most Caradoc marine precipitates from equatorial Laurentia. Positive Kullsberg δ¹⁸O values are attributed to lower seawater temperatures and/or slightly elevated salinity on the Baltic platform relative to seawater from which other marine precipitates formed.     

Geochemistry of meteoric calcite cements in some Pleistocene limestones

In this study, the stable isotope and trace element geochemistries of meteoric cements in Pleistocene limestones from Enewetak Atoll (western Pacific Ocean), Cat Island (Bahamas), and Yucatan were characterized to help interpret similar cements in ancient rocks. Meteoric calcite cements have a narrow range of δ¹⁸O values and a broad range of δ¹³C values in each geographical province. These Pleistocene cements were precipitated from water with stable oxygen isotopic compositions similar to modern rainwater in each location. Enewetak calcite cements have a mean δ¹⁸O composition of ?6.5%₀ (PDB) and δ¹³C values ranging from ?9.6 to +0.4%0 (PDB). Sparry calcite cements from Cat Island have a mean δ¹⁸O composition of ?4.1%₀ and δ¹³C values ranging from ?6.3 to + 1.1%₀. Sparry cements from Yucatan have a mean δ¹⁸O composition of ?5.7%₀ and δ¹³C values of ?8.0 to ?2.7%₀. The mean δ¹⁸O values of these Pleistocene meteoric calcite cements vary by 2.4%₀ due to climatic variations not related directly to latitude. The δ¹³C compositions of meteoric cements are distinctly lower than those of the depositional sediments. Variations in δ¹³C are not simply a function of distance below an exposure surface. Meteoric phreatic cements often have δ¹³C compositions of less than —4.0%₀, which suggests that soil-derived CO₂ and organic material were washed into the water table penecontemporaneous with precipitation of phreatic cements. Concentrations of strontium and magnesium are quite variable within and between the three geographical provinces. Mean strontium concentrations for sparry calcite cements are, for Enewetak Atoll, 620 ppm (σ= 510 ppm); for Cat Island, 1200 ppm (σ= 980 ppm); and for Yucatan, 700 ppm (σ= 390 ppm). Equant cements, intraskeletal cements, and Bahamian cements have higher mean strontium concentrations than other cements. Equant and intraskeletal cements probably precipitated in more closed or stagnant aqueous environments. Bahamian depositional sediments had higher strontium concentrations which probably caused high strontium concentrations in their cements. Magnesium concentrations in Pleistocene meteoric cements are similar in samples from Enewetak Atoll (mean =1.00 mol% MgCO₃; σ= 0.60 mol% MgCO₃) and Cat Island (mean = 0.84 mol% MgCO₃; σ= 0.52mol% MgCO₃) but Yucatan samples have higher magnesium concentrations (mean = 2.20 mol% MgCO₃: σ= 0.84mol% MgCO₃). Higher magnesium concentrations in some Yucatan cements probably reflect precipitation in environments where sea water mixed with fresh water.     

Diagenesis and reservoir quality of the Aldebaran Sandstone, Denison Trough, east-central Queensland, Australia

The Lower Permian Aldebaran Sandstone is the principal hydrocarbon reservoir in the Denison Trough (Bowen Basin), east-central Queensland, Australia. It accumulated in a wide range of fluvio-deltaic and nearshore marine environments. Detailed petrological study of the unit by thin section, X-ray diffraction, scanning electron microscopy, electron microprobe and isotopic analysis reveals a complex diagenetic history which can be directly related to depositional environment, initial composition and burial-temperature history. Early diagenetic effects included the precipitation of pyrite, siderite and illite-smectite rims (δ¹⁸O (SMOW) =+8.9 to + 11.3‰). Deep burial effects included physico-chemical compaction and the formation of quartz overgrowths, siderite (δ¹³C(PDB) =?34.0 to + 11.5‰, δ¹⁸O =?0.7 to +22.7‰), illite/illite-smectite and ankerite (δ¹³C=?9.3 to ?4.9‰) δ¹⁸O=+ 7.6 to + 14.4‰). Involved fluids were in part ‘connate meteoric’ water derived from compaction of the underlying freshwater Reids Dome beds. Important post-maximum burial effects, controlled by deep meteoric influx from the surface, were ankerite and labile grain dissolution and formation of kaolinite (δ¹⁸O=+7.8 to +8.9‰, δD=?115 to ?99‰), calcite (δ¹³C=?9.5 to +0.9‰, δ¹⁸O=+9.0 to +20.0‰) and dawsonite (δ¹³C=?4.0 to +2.3‰, δ¹⁸O=+9.8 to +19.8‰), the formation of dawsonite reflecting eventual stagnation of the aquifer. Entrapment of contained hydrocarbons was a relatively recent event which may be continuing today. Reservoir quality varies from marginal to good in the west to poor in the east, with predictable trends being directly linked to depositional environment and diagenesis.     

'Pseudobreccias' revealed as calcrete mottling and bioturbation in the Late Dinantian of the southern Lake District, UK

Two types of ‘pseudobreccia’, one with grey and the other with brown mottle fabrics, occur in shoaling‐upward cycles of the Urswick Limestone Formation of Asbian (Late Dinantian, Carboniferous) age in the southern Lake District, UK. The grey mottle pseudobreccia occurs in cycle‐base packstones and developed after backfilling and abandonment of Thalassinoides burrow systems. Burrow infills consist of a fine to coarse crystalline microspar that has dull brown to moderate orange colours under cathodoluminescence. Mottling formed when an early diagenetic ‘aerobic decay clock’ operating on buried organic material was stopped, and sediment entered the sulphate reduction zone. This probably occurred during progradation of grainstone shoal facies, after which there was initial exposure to meteoric water. Microspar calcites then formed rapidly as a result of aragonite stabilization. The precipitation of the main meteoric cements and aragonite bioclast dissolution post‐date this stabilisation event. The brown mottle pseudobreccia fabrics are intimately associated with rhizocretions and calcrete, which developed beneath palaeokarstic surfaces capping cycle‐top grainstones and post‐date all depositional fabrics, although they may also follow primary depositional heterogeneities such as burrows. They consist of coarse, inclusion‐rich, microspar calcites that are always very dull to non‐luminescent under cathodoluminescence, sometimes with some thin bright zones. These are interpreted as capillary rise and pedogenic calcrete precipitates. The δ¹⁸O values (?5‰ to ?8‰, PDB) and the δ¹³C values (+2‰ to ?3‰, PDB) of the ‘pseudobreccias’ are lower than the estimated δ¹⁸O values (?3‰ to ?1‰ PDB) and δ¹³C values of (+2‰ to +4‰ PDB) of normal marine calcite precipitated from Late Dinantian sea water, reflecting the influence of meteoric waters and the input of organic carbon.     

Stable isotope evidence for the origin of diagenetic carbonate minerals from the Lower Jurassic Inmar Formation, southern Israel

The oxygen isotope compositions of diagenetic carbonate minerals from the Lower Jurassic Inmar Formation, southern Israel, have been used to identify porewater types during diagenesis. Changes in porewater composition can be related to major geological events within southern Israel. In particular, saline brines played an important role in late (Pliocene-Pleistocene) dolomitization of these rocks. Diagenetic carbonates included early siderite (δ¹⁸O_SMOW=+24.4 to +26.5‰δ¹³C_PDB=?1.1 to +0.8‰), late dolomite, ferroan dolomite and ankerite (δ¹⁸O_SMOW=+18.4 to +25.8‰; δ¹³C_PDB=?2.1 to +0.2‰), and calcite (δ¹⁸O_SMOW=+21.3 to +32.6‰; δ¹³C_PDB=?4.2 to + 3.2‰). The petrographic and isotopic results suggest that siderite formed early in the diagenetic history at shallow depths. The dolomitic phases formed at greater depths late in diagenesis. Crystallization of secondary calcite spans early to late diagenesis, consistent with its large range in isotopic values. A strong negative correlation exists between burial depth (temperature) and the oxygen isotopic compositions of the dolomitic cements. In addition, the δ¹⁸O values of the dolomitic phases in the northern Negev and Judea Mountains are in isotopic equilibrium with present formation waters. This behaviour suggests that formation of secondary dolomite post-dates the tectonic activity responsible for the present relief of southern Israel (Upper Miocene to Pliocene) and that the dolomite crystallized from present formation waters. Such is not the case in the Central Negev. In that locality, present formation waters have much lower salinities and δ¹⁸O values, indicating invasion of freshwater, and are out of isotopic equilibrium with secondary dolomite. Recharge of the Inmar Formation by meteoric water in the Central Negev occurred in the Pleistocene, and halted formation of dolomite.     

Hydrogen and oxygen isotopic compositions of sedimentary kaolin deposits,Egypt: Paleoclimatic implications

The clay fractions of sedimentary kaolin deposits representing different ages (Carboniferous and Cretaceous), types (pisolitic flint and plastic), and localities (Sinai and Aswan) from Egypt were analyzed for their H and O isotopic compositions to examine the paleoclimate conditions during their formation. The δD values of the Carboniferous deposits in Sinai range between −67‰ and −88‰, while the values for the Cretaceous deposits in Sinai range between −59‰ and −75‰. The δ¹⁸O values of the Carboniferous deposits range from 17.9‰ to 19.4‰ and the values for the Cretaceous deposits range between 19.2‰ and 20.4‰. The relatively low δD and δ¹⁸O values of the Carboniferous deposit at the Abu Natash area (−67‰ and 17.9‰, respectively) compared to other Carboniferous deposits (averages of −83.3‰, and 18.8‰ for δD and δ¹⁸O, respectively) could be due to isotopic exchange between this deposit and the adjacent dolomite and/or the enclosed hydrothermally-formed Mn ores of the Carboniferous Um Bogma Formation. The δD and δ¹⁸O values of the Cretaceous pisolitic flint kaolin deposit from Aswan (averages of −65‰ and 20.3‰, respectively) and plastic kaolin from the same area (averages of −66‰ and 19.5‰, respectively) are almost identical. The differences in the δ¹⁸O values between the clay fractions of the pisolitic flint kaolin (20.3‰) and the previously analyzed bulk kaolin of the same deposit (average of 17.5‰) suggest a significant effect of non-clay minerals on the isotopic compositions of the kaolin deposits.The H and O isotopic compositions plot close to the kaolinite line that marks the isotopic composition of kaolinite in equilibrium with meteoric water at 20 °C. This indicates that the kaolinite from both the Carboniferous and Cretaceous deposits in Egypt formed by meteoric water weathering of the source rock(s). The δD and δ¹⁸O values also suggest that kaolinite of these deposits formed under warm-temperate to tropical conditions. The slight deviations of some samples from the kaolinite line suggest post-depositional modifications of the isotopic compositions of studied deposits probably due to the interaction between earlier-formed kaolinite and downward percolating meteoric water.The δD and δ¹⁸O values of the Cretaceous and Carboniferous deposits from all localities suggest that both deposits formed under similar climatic conditions due to the location of Egypt at almost the same distance from the equator either to the south during the Carboniferous or to the north during the Cretaceous.     

Diagenetic overprinting of the sphaerosiderite palaeoclimate proxy: are records of pedogenic groundwater δ18O values preserved?

Meteoric sphaerosiderite lines (MSLs), defined by invariant δ¹⁸O and variable δ¹³C values, are obtained from ancient wetland palaeosol sphaerosiderites (millimetre‐scale FeCO₃ nodules), and are a stable isotope proxy record of terrestrial meteoric isotopic compositions. The palaeoclimatic utility of sphaerosiderite has been well tested; however, diagenetically altered horizons that do not yield simple MSLs have been encountered. Well‐preserved sphaerosiderites typically exhibit smooth exteriors, spherulitic crystalline microstructures and relatively pure (> 95 mol% FeCO₃) compositions. Diagenetically altered sphaerosiderites typically exhibit corroded margins, replacement textures and increased crystal lattice substitution of Ca²⁺, Mg²⁺ and Mn²⁺ for Fe²⁺. Examples of diagenetically altered Cretaceous sphaerosiderite‐bearing palaeosols from the Dakota Formation (Kansas), the Swan River Formation (Saskatchewan) and the Success S2 Formation (Saskatchewan) were examined in this study to determine the extent to which original, early diagenetic δ¹⁸O and δ¹³C values are preserved. All three units contain poikilotopic calcite cements with significantly different δ¹⁸O and δ¹³C values from the co‐occurring sphaerosiderites. The complete isolation of all carbonate phases is necessary to ensure that inadvertent physical mixing does not affect the isotopic analyses. The Dakota and Swan River samples ultimately yield distinct MSLs for the sphaerosiderites, and MCLs (meteoric calcite lines) for the calcite cements. The Success S2 sample yields a covariant δ¹⁸O vs. δ¹³C trend resulting from precipitation in pore fluids that were mixtures between meteoric and modified marine phreatic waters. The calcite cements in the Success S2 Formation yield meteoric δ¹⁸O and δ¹³C values. A stable isotope mass balance model was used to produce hyperbolic fluid mixing trends between meteoric and modified marine end‐member compositions. Modelled hyperbolic fluid mixing curves for the Success S2 Formation suggest precipitation from fluids that were < 25% sea water.     

Isotopic composition (δ<Superscript>13</Superscript>C and δ<Superscript>18</Superscript>O) and genesis of carbonates from the famennian manganiferous formation of Pai-Khoi

The results of isotope-geochemical studies of carbonates of different mineral types from manganese and host rocks of the Famennian manganiferous formation of Pai-Khoi are reported. Kutnahorite ores are characterized by δ¹³C values from–6.6 to 1.3‰ and δ¹⁸O from 20.0 to 27.4‰. Rhodonite–rhodochrosite rocks of the Silovayakha ore occurrence have δ¹³C from–5.2 to–2.9 and δ¹⁸O from 25.4 to 24.3‰. Mineralogically similar rocks of the Nadeiyakha ore occurrence show the lighter carbon and oxygen isotopic compositions: δ¹³C from–16.4 to–13.1 and δ¹⁸O from 24.8 to 22.5‰. Similar isotopic compositions were also obtained for rhodochrosite–kutnahorite rocks of this ore occurrence: δ¹³C from–13.0 to–10.4‰ and δ¹⁸O from 24.6 to 21.7‰. Siderorodochrosite ores differ in the lighter oxygen and carbon isotopic compositions: δ¹⁸O from 18.7 to 17.6‰ and δ¹³C from–10.2 to–9.3‰, respectively. In terms of the carbon and oxygen isotopic compositions, host rocks in general correspond to marine sedimentary carbonates. Geological-mineralogical and isotope data indicate that the formation of the manganese carbonates was related to the hydrothermal ore-bearing fluids with the light isotopic composition of oxygen and carbon dissolved in CO₂. The isotopic features indicate an authigenic formation of manganese carbonates under different isotopegeochemical conditions.     

Conditions of meteoric calcite formation along a Variscan fault and their possible relation to climatic evolution during the Jurassic–Cretaceous

Two calcite cements, filling karst cavities and replacing Lower Carboniferous limestones at the Variscan Front Thrust, were precipitated after mid-Jurassic Cimmerian uplift and subsequent erosion but before late Cretaceous strike-slip movement. The first calcite (stage A) is nonferroan and crystals are coated by hematite and/or goethite. These minerals also occur as inclusions along growth zones. The calcite lattice contains < 0·07 mol.% Fe, but Mn concentrations can be as high as 0·72 mol.% in bright yellow luminescent zones. Primary, originally one-phase, all-liquid, aqueous inclusions have a final melting temperature between ?0·2° and +0·2 °C, indicating a meteoric origin of the ambient water. The δ¹³C and δ¹⁸O values of the calcites are between ?7·3‰ and ?6·3‰, ?7·8‰ and ?5·5‰ on the Vienna PeeDee Belemnite (VPDB) scale, respectively. The second calcite (stage B) consists of ferroan (0·13–0·84 mol.% Fe) blocky crystals with Mn concentrations between 0·34 and 0·87 mol.%. Primary, single-phase aqueous fluid inclusions indicate precipitation from a meteoric fluid below 50 °C . The δ¹³C values of stage B calcites vary between ?7·3‰ and ?2·1‰ VPDB and the δ¹⁸O values between ?7·9‰ and ?7·2‰ VPDB. A precipitation temperature below 50 °C for the stage A calcites and the presence of iron oxide/hydroxide inclusions in the crystals indicate near-surface precipitation conditions. Within this setting, the geochemistry of the nonferroan stage A calcites reflects precipitation under oxic to suboxic conditions. The ferroan stage B calcites precipitated in a reducing environment. The evolution from the stage A to stage B calcites and the associated geochemical changes are interpreted to be related to the change from semiarid to humid conditions in western Europe during late Jurassic–Cretaceous times. A change in humidity can explain the evolution of groundwater from oxic/suboxic to reducing conditions during calcite precipitation. The typically higher δ¹³C values of the stage B compared to the stage A calcites can be explained by a smaller contribution of carbon derived from soil-zone processes than from carbonate dissolution in the groundwater under humid conditions. The small shift to lower δ¹⁸O between stage A and B calcites may be caused by a higher precipitation temperature or a decrease in the δ¹⁸O value of the meteoric water. This decrease could have been caused by a change in the source of the air masses or by an increase in the amount of rainfall during the early mid-Cretaceous. Although the latter interpretation is preferred, it cannot be proven.     

Geology and D-O-C Isotope Systematics of the Tieluping Silver Deposit,Henan, China: Implications for Ore Genesis

The Tieluping silver deposit, which is sited along NE-trending faults within the high-grade metamorphic basement of the Xiong‘er terrane, is part of an important Mesozoic orogenic-type Ag-Pb and Au belt recently discovered. Ore formation includes three stages: Early (E), Middle (M) and Late (L), which include quartz-pyrite (E),polymetallic sulfides (M) and carbonates (L), respectively. The E-stage fluids are characterized by δD=-90%c,δ^13CCO2=2.0‰ and δ^18O=9‰ at 373℃, and are deeply sourced; the L-stage fluids, with δD=-70‰, δ^13C CO2=-1.3%c and δ^18O=-2‰, are shallow-sourced meteoric water; whereas the M-stage fluids, with δD=-109‰, δ^13C CO2=0.1%c and δ^18O2‰, are a mix of deep-sourced and shallow-sourced fluids. Comparisons of the D-O-C isotopic systematics of the Estage ore-forming fluids with the fluids derived from Mesozoic granites, Archean-Paleoproterozoic metamorphic basement and Paleo-Mesoproterozoic Xiong‘er Group, show that these units cannot generate fluids with the measured isotopic composition (high δ^180 and δ^13C ratios and low δD ratios) characteristic of the ore-forming fluids. This suggests that the E-stage ore-forming fluids originated from metamorphic devolatilization of a carbonate-shale-chert lithological association, locally rich in organic matter, which could correspond to the Meso-Neoproterozoic Guandaokou and Luanchuan Groups, rather than to geologic units in the Xiong‘er terrane, the lower crust and the mantle. This supports the view that the rocks of the Guandaokou and Luanchuan Groups south of the Machaoying fault might be the favorable sources. A tectonic model that combines collisional orogeny, metallogeny and hydrothermal fluid flow is proposed to explain the formation of the Tieluping silver deposit. During the Mesozoic collision between the South and North China paleocontinents, a crustal slab containing a lithological association consisting of carbonate-shale-chert, locally rich in organic matter (carbonaceous shale) was thrust northwards beneath the Xiong‘er terrane along the Machaoying fault.Metamorphic devolatilization of this underthrust slab provided the ore-forming fluids to develop the Au-Ag-(Pb-Zn) ore belt, which includes the Tieluping silver deposit.     

Diagenesis of Pennsylvanian phylloid algal mounds from the southern Cantabrian Zone (Spain)

The Pennsylvanian phylloid algal mounds exposed in the Cervatina Limestone of the Cantabrian Zone (NW Spain) developed during the highstands of high-frequency shallowing-upward cycles and lack evidence of subaerial exposure at their tops. Mound core facies are composed of massive bafflestones with variable amounts of calcite cements and anchicodiacean phylloid algae with cyathiform thalli preserved in growth position. Through standard petrographic, isotopic (δ¹⁸O and δ¹³C), major and trace element (Ca, Mg, Fe, Mn, Sr) and cathodoluminescence analyses, five calcite cement phases (cement 1 (C1)–cement 5 (C5)) have been identified filling primary and secondary pores. Early marine diagenesis is represented by micritization and non-luminescent to mottled-dull luminescent high-Mg calcite fibrous marine cement (C1). A dissolution phase then occurred and created vuggy and moldic pores. Based on the absence of field or petrographical or geochemical evidence of exposure, it is inferred that dissolution occurred in near-surface undersaturated marine waters with respect to aragonite related to progressive organic matter oxidation. Secondary porosity was subsequently filled by dull-bright-dull bladed high-Mg calcite (C2), which precipitated in the early shallow burial from marine-derived pore waters. Remaining porosity was occluded by shallow-burial precipitates consisting of non-luminescent scalenohedral low-Mg calcite (C3) followed by non-ferroan dull luminescent calcite spar (C4). Latter phases of calcite spar exhibiting non- and dull luminescence (C5) are associated with burial calcite veins. Low δ¹⁸O values (around ?8‰), moderately depleted δ¹³C values (around 0.5‰) and the homogeneity of trace element contents of carbonate matrix, cements and vein-filling calcites suggest burial isotopic re-equilibration and recrystallization, probably in Early Permian times during post-thrusting orocline formation.     

Origin and migration of palaeofluids in the Upper Visean of the Campine Basin, northern Belgium

Upper Visean limestones in the Campine Basin of northern Belgium are intensively fractured. The largest and most common fractures are cemented by non-ferroan, dull brown-orange luminescent blocky calcite. First melting temperatures of fluid inclusions in these calcites are around -57°C, suggesting that precipitation of the cements occurred from NaCl-CaCl₂-MgCl₂ fluids. The final melting temperatures (T_m^ice) are between -5 and -33°C. The broad range in the T_m^ice data can be explained by the mixing of high salinity fluids with meteoric waters, but other hypotheses may also be valid. Homogenization temperatures from blocky calcite cements in the shelf limestones are interpreted to have formed between 45 and 75°C. In carbonates which were deposited close to and at the shelf margin, precipitation temperatures were possibly in the range 70-85°C and 72-93°C, respectively. On the shelf, the calcites have a δ¹⁸O around -9.3‰ PDB and they are interpreted to have grown in a fluid with a δ¹⁸O between −3.5 and +1.0‰ SMOW. At the shelf margin, blocky calcites (δ¹⁸O∼ - 13.5‰ PDB) could have precipitated from a fluid with a δ¹⁸O betweenn -4.0 and -1.1‰ SMOW. The highest oxygen isotopic compositions are comparable to those of Late Carboniferous marine fluids (δ¹⁸O= - 1‰ SMOW). The lowest values are more positive than a previously reported composition for Carboniferous meteoric waters (δ¹⁸O= -7‰ SMOW). Precipitation is likely to have occurred in marine-derived fluids, which mixed with meteoric waters sourced from near the Brabant Massif. Fluids with a similar negative oxygen isotopic composition and high salinity are actually present in Palaeozoic formations. The higher temperature range in the limestones near the shelf margin is explained by the upward migration of fluids from the ‘basinal’ area along fractures and faults into the shelf.     

Stable isotope signatures associated with palaeosols, Pennsylvanian Holder Formation, New Mexico

The Holder Formation (Pennsylvanian, Virgilian) of southern New Mexico, USA, consists of limestones interbedded with siliciclastics. It was deposited during times of glacio-eustatic sea-level change and was exposed subaerially during multiple sea-level lowstands. Microcomponents and whole-rock samples of limestones were analysed for δ¹³C and δ¹⁸O values to examine the method of whole-rock isotopic analysis for detecting subaerial exposure events and to determine the diagenetic processes acting during subaerial exposure. Whole-rock isotopic shifts are not consistently present across petrographically identified subaerial exposure surfaces. Apparently, whole-rock isotopic shifts do not result from wholesale replacement of the host sediment during soil formation. However, the isotopic shifts are present in calcareous, soil-precipitated microcomponents, such as rhizoliths, laminated crusts, and soil-precipitated cements. The components are heterogeneous in isotopic composition, but converge on a meteoric calcite line at about δ¹⁸O=?5.5‰. These microcomponents are heterogeneous in distribution and may either dominate or be a minor constituent of the whole rock at a single stratigraphic horizon. Without petrographic selection of palaeosol components, the detection of whole-rock isotopic shifts may depend on the selection or chance sampling of a rock containing abundant microcomponents precipitated in a soil environment. Only minor whole-rock isotopic shifts come from those rocks bearing no evidence of exposure and bearing lithological characteristics suggesting subaerial exposure was unlikely.     

Changes in carbon and oxygen isotope composition during limestone diagenesis

The calcite fossils of the Derbyhaven Beds, Isle of Man, have δ¹³C values (+ 1·8 PDB) similar to modern, shallow-water marine skeletons, but the δ¹⁸O values (?6·1 PDB) are much lighter than modern skeletons. The light oxygen values indicate either re-equilibration with isotopically light water before cementation started, or Carboniferous sea water with δ¹⁸O of ?6‰. Aragonite dissolution was followed by precipitation of zoned calcite cement. In this cement, up to six intracrystalline zones, recognized in stained thin sections, show isotopic variation. Carbon varies from + 3-8 to + 1-2‰. and oxygen from ? 2-6 to ? 12-4‰. with decreasing age of the cement. This trend is attributed to increasing temperature and to isotopic evolution of the pore waters during burial. The zoned calcite is sequentially followed by dolomite and kaolinite cements which continue the trend towards light isotopic values. This trend is continued with younger, fault-controlled dolomite, and is terminated by vein-filling calcite and dolomite. The younger calcite, interpreted as a near-surface precipitate from meteoric waters, is unrelated to the older sequence of carbonates and has distinctly different carbon isotope ratios: δ¹³C ? 6-8‰.     

Carbon and Oxygen Isotopic Characteristics of REE—Fluorocarbonate Minerals and Their Genetic Implications,Bayan Obo Deposit,Inner Mongloia,China

REE－fluorocarbonates as major REE minerals in the Bayan Obo deposit,the largest REE deposit in the world,were analyzed for their stable isotopic compositions,The δ^13 C and δ^18 O values of huanghoite,cebaite and bastnaesite from late-stage veins vary in the ranges of 7.8--4.0‰ and 6.7-9.4‰,respectively,These data are relatively similar to those of bastnaesites from banded ores:δ^13C-5.6--5.2‰ andδ^18O3.6-5.5‰.The REE fluorocarbonates from both late-staege veins and banded ores are characterized by lower δ^13 C and δ^18O values,especially the δ^18O values of bastnaesites from banded ores.Compared with them,the disseminated bastnaesits the dolomite-type ores possess rather highδ^13 C and δ^18O values,i.e.,-2.1-0.4‰ and 8.6-12.9‰ respectively.The high values are typical of the sedimentary host dolomite rocks as well as of the dolomite-type-ores.The carbon and oxygen isotopic characteristics of REE fluorocarbonate minerals provide new evidence for the hypothesis on the origin of Bayan Obo deposit-epigenetic hydrothermal metasomatism.     

Oxygen and Hydrogen Isotopes of Waters in the Ordos Basin,China: Implications for Recharge of Groundwater in the North of Cretaceous Groundwater Basin

Hundreds of precipitation samples collected from meteorological stations in the Ordos Basin from January 1988 to December 2005 were used to set up a local meteoric water line and to calculate weighted average isotopic compositions of modern precipitation. Oxygen and hydrogen isotopes, with averages of ?7.8‰ and ?53.0‰ for δ18O and δD, respectively, are depleted in winter and rich in spring, and gradually decrease in summer and fall, illustrating that the seasonal effect is considerable. They also show that the isotopic difference between south portion and north portion of the Ordos Basin are not obvious, and the isotope in the middle portion is normally depleted. The isotope compositions of 32 samples collected from shallow groundwater (less than a depth of 150 m) in desert plateau range from ?10.6‰ to ?6.0‰ with an average of ?8.4‰ for δ18O and from ?85‰ to ?46‰ with an average of ?63‰ for δD. Most of them are identical with modern precipitation. The isotope compositions of 22 middle and deep groundwaters (greater than a depth of 275 m) fall in ranges from ?11.6‰ to ?8.8‰ with an average of ?10.2‰ for δ18O and from ?89‰ to ?63‰ with an average of ?76‰ for δD. The average values are significantly less than those of modern precipitation, illustrating that the middle and deep groundwaters were recharged at comparatively lower air temperatures. Primary analysis of 14C shows that the recharge of the middle and deep groundwaters started at late Pleistocene. The isotopes of 13 lake water samples collected from eight lakes define a local evaporation trend, with a relatively flat slope of 3.77, and show that the lake waters were mainly fed by modern precipitation and shallow groundwater.     

REE, Mn, Fe, Mg and C, O Isotopic Geochemistry of Calcites from Furong Tin Deposit, South China: Evidence for the Genesis of the Hydrothermal Ore-forming Fluids

The Furong tin deposit in the central Nanling region, South China, consists of three main types of mineralization ores, i.e. skarn-, altered granite- and greisen-type ores, hosted in Carboniferous and Permian strata and Mesozoic granitic intrusions. Calcite is the dominant gangue mineral intergrown with ore bodies in the orefield. We have carried out REE, Mn, Fe, and Mg geochemical and C, and O isotopic studies on calcites to constrain the source and evolution of the ore-forming fluids. The calcites from the Furong deposit exhibit middle negative Eu anomaly (Eu/Eu*= 0.311–0.921), except for one which has an Eu/Eu* of 1.10, with the total REE content of 5.49–133 ppm. The results show that the calcites are characterized by two types of REE distribution patterns: a LREE-enriched pattern and a flat REE pattern. The LREE-enriched pattern of calcites accompanying greisen-type ore and skarn-type ore are similar to those of Qitianling granite. The REE, Mn, Fe, and Mg abundances of calcites exhibit a decreasing tendency from granite rock mass to wall rock, i.e. these abundances of calcites associated with altered granite-type and greisen-type ores are higher than those associated with skarn-type ores. The calcites from primary ores in the Furong deposit show large variation in carbon and oxygen isotopic compositions. The δ¹³C and δ¹⁸O of calcites are −0.4 to −12.7‰ and 2.8 to 16.4‰, respectively, and mainly fall within the range between mantle or magmatic carbon and marine carbonate. The calcites from greisen and altered granite ores in the Furong deposit display a negative correlation in the diagram of δ¹³C versus δ¹⁸O, probably owing to the CO₂-degassing of the ore-forming fluids. From the intrusion to wall-rock, the calcites display an increasing tendency with respect to δ¹³C values. This implies that the carbon isotopic compositions of the ore-bearing fluids have progressively changed from domination by magmatic carbon to sedimentary carbonate carbon. In combination with other geological and geochemical data, we suggest that the ore-forming fluids represent magmatic origin. We believe that the fluids exsolved from fractionation of the granitic magma, accompanying magmatism of the Qitianling granite complex, were involved in the mineralization of the Furong tin polymetallic deposit.