High‐grade metamorphism and partial melting of basic and intermediate rocks

Rocks of basic and intermediate bulk composition occur in orogenic terranes from all geological time periods and are thought to represent significant petrological components of the middle and lower continental crust. However, the former lack of appropriate thermodynamic models for silicate melt, amphibole and clinopyroxene that can be applied to such lithologies at high temperature has inhibited effective phase equilibrium modelling of their petrological evolution during amphibolite‐ and granulite facies metamorphism. In this work, we present phase diagrams calculated in the Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O₂ (NCKFMASHTO) compositional system for a range of natural basic and intermediate bulk compositions for conditions of 2–12 kbar and 600–1050 ^°C using newly parameterized activity–composition relationships detailed in a companion paper by Green et al. in this issue. Particular attention is given to mid‐ocean ridge basalt (MORB) and diorite protolith bulk compositions. Calculated subsolidus mineral assemblages in all basic and intermediate rock types are modally dominated by hornblende and plagioclase, with variable proportions of epidote, clinopyroxene, garnet, biotite, muscovite, quartz, titanite or ilmenite present at different pressures. The H₂O‐saturated (wet) solidus has a negative P?T slope and occurs between ～620–690 ^°C at mid‐ to lower‐crustal pressures of 5–10 kbar. The lowest‐T melts generated close to the wet solidus are calculated to have granitic major‐element oxide compositions. Melting at higher temperature is attributed primarily to multivariate hydrate‐breakdown reactions involving biotite and/or hornblende. Partial melt compositions calculated at 800–1050 ^°C for MORB show good correlation with analysed compositions of experimental glasses produced via hydrate‐breakdown melting of natural and synthetic basic protoliths, with Niggli norms indicating that they would crystallize to trondhjemite or tonalite. Diorite is shown to be significantly more fertile than MORB and is calculated to produce high‐T melts (>800 ^°C) of granodioritic composition. Subsolidus and suprasolidus mineral assemblages show no significant variation between different members of the basalt family, although the P?T conditions at which orthopyroxene stabilizes, thus defining the prograde amphibolite–granulite transition, is strongly dependent on bulk‐rock oxidation state and water content. The petrological effects of open‐ and closed‐system processes on the mineral assemblages produced during prograde metamorphism and preserved during retrograde metamorphism are also examined via a case‐study analysis of a natural Archean amphibolite from the Lewisian Complex, northwest Scotland.     

Zircon U–Pb ages and Hf isotope compositions of migmatite from the North Dabie terrane in China: constraints on partial melting

Migmatite gneisses are widespread in the Dabie orogen, but their formation ages are poorly constrained. Eight samples of migmatite, including leucosome, melanosome, and banded gneiss, were selected for U–Pb dating and Hf isotope analysis. Most metamorphic zircon occurs as overgrowths around inherited igneous cores or as newly grown grains. Morphological and internal structure features suggest that their growth is associated with partial melting. According to the Hf isotope ratio relationships between metamorphic zircon and inherited cores, three formation mechanisms for metamorphic zircon can be determined, which are dissolution–reprecipitation of pre‐existing zircon, breakdown of Zr‐bearing phase other than zircon in a closed system and crystallization from externally derived Zr‐bearing melt. Four samples contain magmatic zircon cores, yielding upper intercept U–Pb ages of 807 ± 35–768 ± 12 Ma suggesting that the protoliths of the migmatites are Neoproterozoic in age. The migmatite zircon yields weighted mean two‐stage Hf model ages of 2513 ± 97–894 ± 54 Ma, indicating reworking of both juvenile and ancient crustal materials at the time of their protolith formation. The metamorphic zircons give U–Pb ages of 145 ± 2–120 ± 2 Ma. The oldest age indicates that partial melting commenced prior to 145 Ma, which also constrains the onset of extensional tectonism in this region to pre‐145 Ma. The youngest age of 120 Ma was obtained from an undeformed granitic vein, indicating that deformation in this area was complete at this time. Two major episodes of partial melting were dated at 139 ± 1 and 123 ± 1Ma. The first episode of partial melting is obviously older than the timing of post‐collision magmatism, corresponding to regional extension. The second episode of partial melting is coeval with the widespread post‐collision magmatism, indicating the gravitational collapse and delamination of the orogenic lithospheric keel of the Dabie orogen, which were possibly triggered by the uprising of the Cretaceous mid‐Pacific superplume.     

Low-pressure regional metamorphism in the Omeo Metamorphic Complex, Victoria, Australia

The Omeo Metamorphic Complex forms the southern end of the Wagga Metamorphic Belt, which is the main locus of Palaeozoic low-pressure metamorphism in the Lachlan Fold Belt, south-eastern Australia. It comprises metamorphosed Ordovician quartz-rich turbidites originally derived from Precambrian cratonic rocks. Prograde regional metamorphism occurred in the early Silurian, very soon after sedimentation had ceased. The sequence of metamorphic zones, with increasing grade, is: chlorite, biotite, cordierite, andalusite–K-feldspar and sillimanite–K-feldspar. Migmatites occur in the sillimanite–K-feldspar zone, but large bodies of S-type granite were derived from rocks underlying the exposed Ordovician sequence. P and T estimates for the highest grade rocks are T = 700°C and P = 3.5 kbar, indicating a very high P–T gradient of 65°C/km.
The high heat flow during prograde metamorphism probably resulted from a combination of a thermal anomaly persisting from a pre-metamorphic back-arc basin environment, and intrusion of hot, mantle-derived magmas into the lower and middle crust.
Regional retrograde metamorphism coincided with a general reheating of the crust in the Siluro-Devonian, accompanied by intrusion of many I-type plutons and resetting of the K–Ar dates of some earlier plutons. The Omeo Metamorphic Complex was exposed to erosion at this time.     

Partial melting of deeply subducted continental crust during exhumation: insights from felsic veins and host UHP metamorphic rocks in North Qaidam,northern Tibet

A combined petrological, geochronological and geochemical study was carried out on felsic veins and their host rocks from the North Qaidam ultrahigh‐pressure (UHP) metamorphic terrane in northern Tibet. The results provide insights into partial melting of deeply subducted continental crust during exhumation. Partial melting is petrograpically recognized in metagranite, metapelite and metabasite. Migmatized gneisses, including metagranite and metapelite, contain microstructures such as granitic aggregates with varying outlines, small dihedral angles at mineral junctions and feldspar with magmatic habits, indicating the former presence of felsic melts. Partial melts were also present in metabasite that occurs as retrograde eclogite. Felsic veins in both the eclogites and gneisses exhibit typical melt crystalline textures such as large euhedral feldspar grains with straight crystal faces, indicating vein crystallization from anatectic melts. The Sr–Nd isotope compositions of felsic veins inside gneisses suggest melt derivation from anatexis of host gneisses themselves, but those inside metabasites suggest melt derivation from hybrid sources. Felsic veins inside gneisses exhibit lithochemical compositions similar to experimental melts on the An–Ab–Or diagram. In trace element distribution diagrams, they exhibit parallel patterns to their host rocks, but with lower element contents and slightly positive Eu and Sr anomalies. The geochemistry of these felsic veins is controlled by minerals that would decompose and survive, respectively, during anatexis. Felsic veins inside metabasites are rich either in quartz or in plagioclase with low normative orthoclase. In either case, they have low trace element contents, with significantly positive Eu and Sr anomalies in plagioclase‐rich veins. Combined with cumulate structures in some veins, these felsic veins are interpreted to crystallize from anatectic melts of different origins with the effect of crystal fractionation. Nevertheless, felsic veins in different lithologies exhibit roughly consistent patterns of trace element distribution, with variable enrichment of LILE and LREE but depletion of HFSE and HREE. There are also higher contents of trace elements in veins hosted by gneisses than veins hosted by metabasites. Anatectic zircon domains from felsic veins and migmatized gneisses exhibit consistent U–Pb ages of c. 420 Ma, significantly younger than the peak UHP eclogite facies metamorphic event at c. 450–435 Ma. Combining the petrological observations with local P–T paths and experimentally constrained melting curves, it is inferred that anatexis of UHP gneisses was caused by muscovite breakdown while anatexis of UHP metabasites was caused by fluid influx. These UHP metagranite, metapelite and metabasite underwent simultaneous anatexis during the exhumation, giving rise to anatectic melts with different compositions in various elements but similar patterns in trace element distribution.     

Contrasting behaviour of rare earth and major elements during partial melting in granulite facies migmatites, Wuluma Hills, Arunta Block, central Australia

Low‐P granulite facies metapelitic migmatites in the Wuluma Hills, Strangways Metamorphic Complex, Arunta Block, preserve evidence of polyphase deformation and migmatite formation which is of the same age of the c. 1730 Ma Wuluma granite. Mineral equilibria modelling of garnet‐orthoproxene‐cordierite‐bearing assemblages using thermocalc is consistent with peak S3 conditions of 6.0–6.5 kbar and 850–900 °C. The growth of orthopyroxene and garnet was primarily controlled by biotite breakdown during partial melting reactions. Whereas orthopyroxene in the cordierite‐biotite mesosome shows enrichment of heavy‐REE (HREE) relative to medium‐REE (MREE), orthopyroxene in adjacent garnet‐bearing leucosome shows depletion of HREE relative to MREE. There is no appreciable difference in major element contents of minerals common to both the mesosome and leucosome. The REE variations can be satisfactorily explained by decoupling of major element and REE partitioning, in the context of appropriate phase‐equilibria modelling of a prograde path at ～6 kbar. Sparse garnet nucleii formed at ～760 °C, along with concentrated leucosome development and preferentially partitioned HREE. Further heating to ～800 °C at constant or subtly increasing pressure conditions additionally stabilized orthopyroxene and decreased the garnet mode. Orthopyroxene in the leucosome inherited an REE pattern consequent to the partial consumption of garnet, it being distinct from the REE pattern in mesosome orthoproxene that was mostly controlled by biotite breakdown. Such within‐sample variability in the enrichment of heavy REE indicates that caution needs to be exercised in the application of common elemental partitioning coefficients in spatially complex metamorphic rocks.     

Palaeoproterozoic high-T, low-P metamorphism and dehydration melting in metapelites from the Mopunga Range, Arunta Inlier, central Australia

A sequence of psammitic and pelitic metasedimentary rocks from the Mopunga Range region of the Arunta Inlier, central Australia, preserves evidence for unusually low pressure (c. 3 kbar), regional‐scale, upper amphibolite and granulite facies metamorphism and partial melting. Upper amphibolite facies metapelites of the Cackleberry Metamorphics are characterised by cordierite‐andalusite‐K‐feldspar assemblages and cordierite‐bearing leucosomes with biotite‐andalusite selvages, reflecting P–T conditions of c. 3 kbar and c. 650–680 °C. Late development of a sillimanite fabric is interpreted to reflect either an anticlockwise P–T evolution, or a later independent higher‐P thermal event. Coexistence of andalusite with sillimanite in these rocks appears to reflect the sluggish kinematics of the Al₂SiO₅ polymorphic inversion. In the Deep Bore Metamorphics, 20 km to the east, dehydration melting reactions in granulite facies metapelites have produced migmatites with quartz‐absent sillimanite‐spinel‐cordierite melanosomes, whilst in semipelitic migmatites, discontinuous leucosomes enclose cordierite‐spinel intergrowths. Metapsammitic rocks are not migmatised, and contain garnet–orthopyroxene–cordierite–biotite–quartz assemblages. Reaction textures in the Deep Bore Metamorphics are consistent with a near‐isobaric heating‐cooling path, with peak metamorphism occurring at 2.6–4.0 kbar and c. 750–800 °C. SHRIMP U–Pb dating of metamorphic zircon rims in a cordierite‐orthopyroxene migmatite from the Deep Bore Metamorphics yielded an age of 1730 ± 7 Ma, whilst detrital zircon cores define a homogeneous population at 1805 ± 7 Ma. The 1730 Ma age is interpreted to reflect the timing of high‐T, low‐P metamorphism, synchronous with the regional Late Strangways Event, whereas the 1805 Ma age provides a maximum age of deposition for the sedimentary precursor. The Mopunga Range region forms part of a more extensive low‐pressure metamorphic terrane in which lateral temperature gradients are likely to have been induced by localised advection of heat by granitic and mafic intrusions. The near‐isobaric Palaeoproterozoic P–T–t evolution of the Mopunga Range region is consistent with a relatively transient thermal event, due to advective processes that occurred synchronous with the regional Late Strangways tectonothermal event.     

变泥质岩的深熔作用与具铈（Ce）负异常熔体的成因

对美国加州南Sierra Nevada岩基中一个典型的中生代变质表壳岩及其混合岩带进行了详细的野外观察和元素地球化学研究。研究发现:在持久(约为150Ma)的花岗岩侵位作用下,早白垩世变泥质岩发生达角闪岩相的中高级变质作用和部分熔融,导致Isabella混合岩的形成;浅色体具有和变泥质岩及混合岩近平行的REE分布模式,但浅色体的LREE含量相对较低;和变泥质岩相似,混合岩中的浅色体具有显著的Ce负异常。野外观测、岩相观察及元素地球化学特征表明,浅色体显著的Ce负异常是继承了原岩的Ce负异常特征,而不是由于副矿物(磷灰石、独居石或锆石)的差异溶解或结晶分异作用造成的。早白垩世变泥质岩(浅色体的原岩)主要由泥质及沙质海相沉积物组成,局部夹基性火山灰和火山碎屑,形成于与大陆岛弧密切相关的浅海环境。原岩的Ce负异常反映了较还原的浅海沉积环境。具有Ce负异常浅色体的产出表明,如果俯冲带上的沉积岩在俯冲过程中发生部分熔融作用并且所产生的熔体参与大洋型岛弧岩浆作用,最终可以导致具有Ce异常的基性岩浆生成。     

The evolution of zircon during low‐P partial melting of metapelitic rocks: theoretical predictions and a case study from Mt Stafford,central Australia

Palaeoproterozoic metasedimentary migmatite reflects the highest temperature parts of a regional aureole at Mt Stafford, central Australia, comprising rocks that experienced 500–800 °C at ≈3 kbar. Whole‐rock major element concentrations are correlated with Zr content, psammitic compositions having nearly twice the Zr content of pelitic compositions. Zirconium is concentrated in mesosome compared with leucosome. Zircon is largely detrital, mostly lacking any overgrowth contemporary with migmatite formation. Comparatively small proportions of micro‐zircon (<10 μm) in sub‐solidus rocks are mostly hosted by quartz and plagioclase. Much higher proportions (three to five times) of micro‐zircon in migmatite are hosted by prograde K‐feldspar, cordierite and biotite. T–X and P–T NCKFMASHTZr pseudosections constructed using thermocalc model the distribution of Zr between solid and silicate liquid phases. Half of the detrital zircon (~100 ppm Zr) is predicted to be dissolved into silicate liquid at ≈800 °C and all dissolved by 850 °C, if all zircon is involved in the equilibration volume. Melt segregation at relatively low temperature is predicted to enrich the residuum in Zr, consistent with the observed distribution of Zr between mesosome and leucosome. The limited development of metamorphic zircon rims or overgrowths at Mt Stafford is explained by three concurrent processes: (i) Zr liberated during prograde metamorphism formed micro‐zircon, rather than following the prediction that Zr will partition into silicate liquid; (ii) some detrital zircon was probably armoured by other rock‐forming minerals, reducing Zr content in the effective bulk rock composition; and (iii) small proportions of melt loss during migmatization removed Zr that otherwise would have been available to form metamorphic rims.     

High to ultrahigh temperature contact metamorphism and dry partial melting of the Tasiuyak paragneiss,Northern Labrador

Contact aureoles of the anorthositic to granitic plutons of the Mesoproterozoic Nain Plutonic Suite (NPS), Labrador, are particularly well developed in the Palaeoproterozoic granulite facies, metasedimentary, Tasiuyak gneiss. Granulite facies regional metamorphism (M_R), c. 1860 Ma, led to biotite dehydration melting of the paragneiss and melt migration, leaving behind biotite‐poor, garnet–sillimanite‐bearing quartzofeldspathic rocks. Subsequently, Tasiuyak gneiss within a c. 1320 Ma contact aureole of the NPS was statically subjected to lower pressure, but higher temperature conditions (M_C), leading to a second partial melting event, and the generation of complex mineral assemblages and microstructures, which were controlled to a large extent by the textures of the M_R assemblage. This control is clearly seen in scanning electron microscopic images of thin sections and is further supported by phase equilibria modelling. Samples collected within the contact aureole near Anaktalik Brook, west of Nain, Labrador, mainly consist of spinel–cordierite and orthopyroxene–cordierite (or plagioclase) pseudomorphs after M_R sillimanite and garnet, respectively, within a quartzofeldspathic matrix. In addition, some samples contain fine‐grained intergrowths of K‐feldspar–quartz–cordierite–orthopyroxene inferred to be pseudomorphs after osumulite. Microstructural evidence of the former melt includes (i) coarse‐grained K‐feldspar–quartz–cordierite–orthopyroxene domains that locally cut the rock fabric and are inferred to represent neosome; (ii) very fine‐ to medium‐grained cordierite–quartz intergrowths interpreted to have formed by a reaction involving dissolution of biotite and feldspar in melt; and (iii) fine‐scale interstitial pools or micro‐cracks filled by feldspar interpreted to have crystallized from melt. Ultrahigh temperature (UHT) conditions during contact metamorphism are supported by (i) solidus temperatures >900 °C estimated for all samples, coupled with extensive textural evidence for contact‐related partial melting; (ii) the inferred (former) presence of osumilite; and (iii) titanium‐in‐quartz thermometry indicating temperatures within error of 900 °C. The UHT environment in which these unusual textures and minerals were developed was likely a consequence of the superposition of more than one contact metamorphic event upon the already relatively anhydrous Tasiuyak gneiss.     

What controls partial melting in migmatites?

Abstract The layers of six stromatic migmatites from Northern, Western, and Central Europe display small but systematic chemical and mineralogical differences. At least five of these migmatites do not show any signs of largescale metamorphic differentiation, metasomatism, or segregation of melts. It is concluded, therefore, that the compositional layering observed in most of the investigated migmatites is due to compositional differences inherited from the parent rocks. Almost isochemical partial melting seems to be the most probable process transforming layered paragneisses, metavolcanics, or schists into migmatites.
The formation of neosomes is believed to be caused by higher amounts of partial melts formed due to higher amounts of water moving into these layers. The neosomes have less biotite and more K-feldspar, if K-feldspar is present at all, than the adjacent mesosomes. These differences are small but systematic and seem to control the access of different amounts of water to the various rock portions. Petrographical observations, chemical data, and theoretical considerations indicate a close relationship between rock composition, rock deformation, transport of water, partial melting, and formation of layered migmatites.     

北秦岭超高压地体折返过程中的多期次部分熔融

本文对丹凤地区秦岭岩群含柯石英超高压变质地体长英质片麻岩中的混合岩化长英质浅色体和含石榴子石暗色包体的花岗质脉体进行了详细的矿物学、地球化学和锆石U-Pb年代学以及Lu-Hf同位素研究。其中,长英质浅色体显示了近原位熔融的高硅、富钾的过铝质花岗岩地球化学特征;锆石的CL图像呈灰黑色,均匀无结构或云雾状内部结构,Th/U比值0. 008,并含有钾长石、斜长石、石英和磷灰石等包裹体,显示深熔锆石的特征;花岗质脉体暗色包体中的石榴子石显示核-边成分环带,其中核部成分与秦岭岩群长英质片麻岩中石榴子石成分一致,边部Sps含量升高,显示熔体改造或退变质扩散特征,寄主花岗质脉体显示重稀土强烈亏损的与石榴子石平衡的熔体特征,指示它们是秦岭岩群含石榴子石长英质片麻岩部分熔融的产物。锆石LA-ICP-MS定年得到长英质浅色体和花岗质脉体的结晶年龄分别为445±4Ma和420±1Ma,明显晚于本区的超高压变质时代,而与折返过程中麻粒岩相和角闪岩相退变质叠加的时代基本一致。结合区域地质和前人的研究成果,提出秦岭岩群在深俯冲板块的折返过程中,分别在445Ma和420Ma发生了两期部分熔融作用。     

Migmatite microstructures and partial melting of Hamadan metapelitic rocks,Alvand contact aureole,western Iran

Intrusion-bordering migmatites comprise a substantial, high-grade metamorphic part of the Alvand aureole near Hamadan, western Iran. Abundant Al-rich metasedimentary rocks and various granites occur in this region. Migmatites consist of Bt?+?Sill?+?Grt?+?Crd?+?Sp ± Opx melanosomes and Grt?+?Pl?+?Kfs?+?Qtz leucosomes. These assemblages reflect upper pyroxene hornfels to lower sanidinite facies physical conditions. The appearance of orthopyroxene in these rocks marks the pressure–temperature transition from the pyroxene hornfels to the sanidinite facies. Field relations, mineral parageneses, and pressure–temperature estimates suggest that intrusion of granitic magma and concomitant partial melting of metasedimentary wallrock units were the main processes involved in the migmatization. Peak metamorphism took place at 650–750°C and ～2–4 kbar; such high-temperature/low-pressure metamorphism was caused mainly by advective heat derived from the emplacement of plutons. Regional metamorphism, granitic magmatism, and contact metamorphism reflected arc construction and collision during subduction of a Neotethyan seaway and subsequent Late Cretaceous–early Tertiary oblique collision of Afro-Arabia (Gondwana) with the Iranian microcontinent.     

A sequence of partial melting reactions at Mt Stafford, central Australia

Metasedimentary gneisses show a rapid change in grade in a 10  km wide low- P /high- T  regional aureole at Mt Stafford in the Arunta Block, central Australia. Migmatite occurs in all but the lowermost of five metamorphic zones, which grade from greenschist (Zone 1) through amphibolite (Zones 2–3) to granulite facies (Zones 4–5). The sequence of partial melting reactions inferred for metapelitic rocks is dependant upon protolith, temperature and fluid conditions. The metapelite solidus in Zone 2 reflects vapour-present melting at P ≈3  kbar and T  ≈640  °C, melting having initially been controlled by the congruent breakdown of the assemblage Crd–Kfs–Bt–Qtz. At slightly higher temperature, andalusite in leucosome formed via the reaction Kfs+Qtz+Bt+H₂O→And+melt; And+melt having been stabilized by the presence of boron. Sillimanite coaxially replaces andalusite in the high-grade portion of Zone 2. In Zone 3, large aluminosilicate aggregates in leucosome are armoured by Spl–Crd±Grt symplectites. Garnet partially pseudomorphs biotite, cordierite or spinel in high-grade portions of Zone 3. Zone 4 Grt–Crd–Opx-bearing metapsammite assemblages and garnet-bearing leucosome reflect T  ≈800  °C and P =2.2±0.9  kbar. In the model KFMASH system the principal vapour-absent melting step reflected significant modal changes related to the breakdown of the As–Bt tie-line and the establishment of the Spl–Crd tie-line; the bulk rock geochemistry of migmatite samples straddle the Spl–Crd tie-line. The aluminous bulk-rock composition of the common bedded migmatite restricted its potential to witness garnet-forming and orthopyroxene-forming reactions, minor textural and modal changes in and above Zone 3 reflecting biotite destablization in biotite-poor assemblages.     

Sillimanite and andalusite produced by base-cation leaching and contact metamorphism of felsic igneous rocks

Abstract Contact metamorphism adjacent to a porphyritic quartz-monzodiorite at Kentucky, New South Wales, Australia has produced hornfelses in porphyritic leucogranite at a peak temperature of about 650–700° C and a maximum confining pressure of about 2 kbar (200 MPa). A gradation appears to exist from normal slightly peraluminous to modified strongly peraluminous metagranite hornfelses, which have also been enriched in sulphur. The strongly peraluminous hornfelses, containing cordierite, andalusite, sillimanite, biotite, pyrite and pyrrhotite, retain residual porphyritic igneous microstructures. These rocks appear to have been formed by leaching of base cations, during and possibly just before the contact metamorphism. Folia of fibrous sillimanite anastomose between lenticular grains of quartz and feldspar and truncate igneous zoning in plagioclase grains, suggesting that cation leaching and solution transfer occurred during growth of the sillimanite. Fibrous sillimanite also grew in grain boundaries of polygonal aggregates formed by the contact metamorphism. Therefore, at least some of the cation leaching appears to have occurred at the highest metamorphic grade. Metasandstones that are locally strongly peraluminous adjacent to the monzodiorite stock also, have probably undergone similar leaching.     

北大别的多阶段高温变质作用与部分熔融及其地球动力学过程和大地构造意义

北大别经历了三叠纪高温超高压变质作用和多阶段折返历史,因而榴辉岩中广泛发育多期减压结构,极少保留早期的超高压变质记录,这为它们不同变质阶段的温度条件估算带来了巨大困难。然而,目前流行的微量元素温度计为北大别榴辉岩的峰期及之后的退变质阶段温度的确定提供了可能性。根据锆石中Ti和金红石中Zr温度计,结合传统矿物对温度计的计算数据,获得了北大别榴辉岩中多阶段高温（>900 ℃）条件的数据,证明研究区经历了从超高压榴辉岩相→石英榴辉岩相→高压麻粒岩相阶段的高温变质过程。并且,北大别经历了折返初期（207±4 Ma）的减压熔融和碰撞后燕山期（约130 Ma）的加热熔融作用。长时间的高温变质作用与多期部分熔融也许正是北大别长期难以发现柯石英和有关超高压变质证据等的重要原因。因此,这些成果有助于甄别北大别的岩石成因和演化过程以及大别山多岩片差异折返模型的建立和完善。     

Petrology of an intrusion-related high-grade migmatite: implications for partial melting of metasedimentary rocks and leucosome-forming processes

Intrusion-related migmatites comprise a substantial part of the high-grade part of the southern Damara orogen, Namibia which is dominated by Al-rich metasedimentary rocks and various granites. Migmatites consist of melanosomes with biotite+sillimanite+garnet+cordierite+hercynite and leucosomes are garnet- and cordierite-bearing. Metamorphic grade throughout the area is in the upper amphibolite to lower granulite facies (5–6 kbar at 730–750 °C). Field evidence, petrographic observations, chemical data and mass balance calculations suggest that intrusion of granitic magmas and concomitant partial melting of metasedimentary units were the main processes for the generation of the migmatites. The intruding melts were significantly modified by magma mixing with in situ partial melts, accumulation of mainly feldspar and contamination with garnet from the wall rocks. However, it is suggested that these melts originally represented disequilibrium melts from a metasedimentary protolith. The occurrence of LILE-, HFSE- and LREE-enriched and -depleted residues within the leucosomes implies that both quartzo-feldspathic and pelitic rocks were subjected to partial melting. Isotope ratios of the leucosomes are rather constant (¹⁴³Nd/¹⁴⁴Nd (500 Ma): 0.511718–0.511754, ε Nd (500 Ma): ?3.54 to ?5.11) and Sr (⁸⁷Sr/⁸⁶Sr (500 Ma): 0.714119–0.714686), the metasedimentary units have rather constant Nd isotope ratios (¹⁴³Nd/¹⁴⁴Nd (500 Ma): 0.511622–0.511789, ε Nd (500 Ma): ?3.70 to ?6.93) but variable Sr isotope ratios Sr (⁸⁷Sr/⁸⁶Sr (500 Ma): 0.713527–0.722268). The most restitic melanosome MEL 4 has a Sr isotopic composition of ⁸⁷Sr/⁸⁶Sr (500 Ma): 0.729380. Oxygen isotopes do not mirror the proposed contamination process, due to the equally high δ¹⁸O contents of metasediments and crustal melts. However, the most LILE-depleted residue MEL 4 shows the lowest δ¹⁸O value (<10). Mass balance calculations suggest high degrees of partial melting (20–40%). It is concluded that partial melting was promoted by heat transfer and release of a fluid phase from the intruding granites. High degrees of partial melting can be reached as long as the available H₂O, derived from the crystallization of the intruding granites, is efficiently recycled within the rock volume. Due to the limited amounts of in situ melting, it seems likely that such regional migmatite terranes are not the sources for large intrusive granite bodies. The high geothermal gradient inferred from the metamorphic conditions was probably caused by exhumation of deep crustal rocks and contemporaneous intrusion of huge masses of granitoid magmas. The Davetsaub area represents an example of migmatites formed at moderate pressures and high temperatures, and illustrates some of the reactions that may modify leucosome compositions. The area provides constraints on melting processes operating in high-grade metasedimentary rocks.     

苏鲁仰口超高压岩石SHRIMP锆石U/Pb定年与部分熔融时限

在大型碰撞造山带中,在陆壳物质深俯冲或快速折返早期,在超高压-高压条件下,易熔组分可能发生水致或脱水部分熔融,形成花岗质熔体。在超高压-高压条件下,苏鲁超高压岩石发生过部分熔融作用,形成长英质多晶体包裹体和不同尺度的花岗质岩石, 导致可观的地球化学效应。为确定苏鲁超高压岩石部分熔融的时限,对山东仰口超高压副片麻岩和其中平行片麻理的同构造钾质花岗岩脉进行了SHRIMP锆石U/Pb地质年代学、全岩地球化学和锆石内矿物包裹体的研究。副片麻岩的锆石具有典型的核-幔-边结构。核部锆石为碎屑锆石,²⁰⁶Pb/²³⁸U年龄大于282Ma,可能反映了副片麻岩的原岩包含不同成因的物质;幔部和边部的Th/U比都小于0.1,分别给出233±3Ma和214±4Ma的²⁰⁶Pb/²³⁸U 年龄,分别对应于超高压变质和角闪岩相退变质年龄。同构造花岗岩脉是富钾过铝质花岗岩(A/CNK=1.2),锆石也具有核-幔-边结构;核部锆石年龄与副片麻岩的核部锆石年龄相当,反映了该花岗岩脉的源区可能是变沉积岩;除幔部锆石的一个点具有²⁰⁶Pb/²³⁸U年龄为234.6±3.9Ma之外,其它幔部锆石位于谐和线附近,给出²⁰⁶Pb/²³⁸U年龄为220.8±2.9Ma, 该年龄代表着该花岗岩脉的形成年龄。上述数据表明,在仰口地区,超高压岩石的部分熔融作用早于角闪岩相退变质作用。     

Local partial melting of the lower crust triggered by hydration through melt–rock interaction: an example from Fiordland,New Zealand

We investigate a low‐strain outcrop of the lower crust, the Pembroke Granulite, exposed in northern Fiordland, New Zealand, which exhibits localized partial melting. Migmatite and associated tschermakite–clinozoisite (TC) gneiss form irregular, elongate bodies that cut a two‐pyroxene–pargasite (PP) gneiss. Gradational boundaries between rock types, and the progressive nature of changes in mineral assemblage, microstructure and chemistry are consistent with the TC gneiss and migmatite representing modified versions of the PP gneiss. Modification is essentially isochemical, where partial modification involves hydration of the assemblage and mineral chemistry changes, and complete modification involves additional recrystallization and in situ partial melt production. Microstructures of quartz and plagioclase, including small dihedral angles, string of beads textures and films surrounding amphibole and garnet grains are consistent with the former presence of melt in modified rock types. The documented rock modification is attributed to melt–rock interaction occurring during porous melt flow of a dominantly externally derived, hydrous silicate melt. Microstructures indicate melt flow occurred along grain boundaries and field relationships show it was focused into channels tens of metres wide, with preference for following the pre‐existing foliation. Melt–rock interaction at the grain scale resulted in hydration and modification of the host PP gneiss, which resulted in localized partial melting. These relationships indicate prograde hydration during localized melt–rock interaction drove migmatization of the lower crust.     

Low‐P melting of metapelitic rocks and the role of H2O: Insights from phase equilibria modelling

Water‐fluxed melting has long been thought to have a minor influence on the thermal and chemical structure of the crust. We report here on amphibolite facies metasedimentary rocks from the 490–450 Ma Famatinian Orogen, in northwest Argentina, that have undergone water‐fluxed incongruent biotite melting at relatively low temperature, which have produced and lost a significant volume of melt. The protoliths consist of the turbiditic Puncoviscana Formation (Neoproterozoic to Early Cambrian). The field area exhibits a condensed metamorphic field gradient, from greenschist to amphibolite facies suprasolidus conditions, recording a low pressure almost isobaric path, reaching peak conditions estimated at 700°C at 4 kbar. Thermodynamic modelling in the MnNCKFMASHTO system is applied to investigate melting at such low pressure as a function of water content. Calculations using a typical turbidite composition show how small amounts of added free H₂O may increase significantly the melt fraction with little or no change in either the melt or residual phase compositions. They indicate negligible difference in normative An–Ab–Or proportions and ferromagnesian contents between melts derived by dehydration and water‐fluxed melts. The same is true for the content of H₂O dissolved in melts, which remains constant and the melt produced is granitic whether or not aqueous fluids are present. Thus, neither the residue nor the melt composition are indicators of the presence of aqueous fluids during anatexis. Recognizing the impact of small additions of H₂O to an anatectic terrane may therefore be difficult. The most significant change related to water‐fluxing is the relative proportions of minerals and melt fraction, rather than the actual mineral assemblage. The modal proportion of feldspar decreased while those of cordierite and biotite increased in the residual assemblages, as <5 mol.% of free H₂O was added. The impact of this addition is to more than double the proportion of water‐undersaturated melt to 25–30 mol.%. We have also developed a simple way to estimate how much melt a residual rock has lost, if the compositional trends of the protoliths are known. In summary, we find that even though the addition of small amounts of free H₂O impacts significantly on rock fertility, there is little obvious record in the field. The combined application of careful petrological investigation and thermodynamic modelling is the key to identify the influence of aqueous fluids, and exploit systems that became open not only to fluid influx but also to the extraction of melt.     

中国大陆科学钻探CCSD-PP3钻孔地幔岩的尖晶石相部分熔融证据

CCSD PP3超镁铁岩表现为高 Mg 和 Cr,低 Ca 和 Al 特征,是中国东部和超高压变质带上极其罕见的亏损地幔岩,通过地球化学和矿物学和 Re-Os 同位素研究发现岩石来自古元古代岩石圈地幔,并在地幔浅部尖晶石相条件下发生部分熔融,最近一次部分熔融作用发生在中-晚元古代,后经岩石圈厚度加大、拆沉或深俯冲过程,岩石转变为石榴石橄榄岩。