A Tertiary age for Alpine high-pressure metamorphism in the Gran Paradiso massif, Western Alps: a Rb–Sr microsampling study

The timing of high‐pressure (HP) metamorphism in the internal basement massifs of the Western Alps has been contentious. In the Gran Paradiso massif silvery micaschists, thought to have developed from granitic precursors, contain assemblages indicative of pressures in excess of 18 kbar at 500–550 °C. This paper presents unique geochronological data for the paragenesis of the silvery micaschist HP assemblage. Rb–Sr microsampling of an apatite–phengite pair thought to have remained closed to Rb–Sr exchange since the HP paragenesis formed has yielded an age of 43.0 ± 0.5 Ma. Greenschist retrogression occurred after 36.3 ± 0.4 Ma, probably in the interval 36–34 Ma. The localised disturbance of the Rb–Sr system in phengite, apatite and allanite during retrogression means that only in situ microsampling could obtain meaningful ages from these rocks. The new data indicating a Tertiary age for HP metamorphism in the Gran Paradiso massif agree with recent data for other internal basement massifs in the Western Alps. A model fitting the Gran Paradiso massif into the Western Alpine framework is presented.     

Extension syn-convergence,poinçonnement vertical et unités métamorphiques contrastées en bordure ouest du Grand Paradis (Alpes Franco-Italiennes)

The Piemontese zone, at the western border of the Gran Paradiso massif (western Alps) consists of the oceanic schistes lustrés units and the continental Grand Paradiso (GP) unit. In complement to previous work, tectono-metamorphic investigations allow us to establish pressure gaps between the three studied units with: the upper schistes lustrés (LS) unit, metamorphosed under blueschist facies conditions (9.5 ± 2 kbar, 340 ± 30 °C). The lower schistes lustrés (LI) unit, metamorphosed under low temperature eclogite facies conditions (12.5 ± 3 kbar, 480 ± 50 °C). The Gran Paradiso (GP) unit, metamorphosed under higher pressure and temperature eclogite facies conditions (12 to 20 kbar, 500 ± 50 °C). The whole metamorphic pile recorded a decompression under amphibolite facies conditions for the LI unit and in the greenschist facies conditions for the LS unit and GP unit, i.e. with a slight and late temperature increase. Fluid inclusion studies on quartz in late cracks and shear planes (C’) show that the three units were juxtaposed and deformed together under metamorphic conditions of 4 ± 1 kbar, and 400 ± 50 °C. A finite strain field study reveals regional scale extensional tectonics beginning under greenschist facies conditions and ending under brittle conditions. Ductile greenschist deformation corresponds to dome and basin trajectories of the foliation surface. A partition is observed between domains where a pure shear regime prevails in the core of the domes and domains where a simple shear regime prevails, towards the WNW, at the rim of the domes, at the contact between units. Brittle deformation corresponds to a continuum of the ductile deformation. Meanwhile, metamorphic contrasts suggested by pressure estimates cannot be ruled by the relative extension-related displacements. This extension corresponds to the accommodation of the vertical indentation of the high pressure units by the stacking of deep crustal slices, in front of the rigid Apulian mantle back-stop, during continuous convergence.     

P–T evolution of Precambrian eclogite in the Sveconorwegian orogen,SW Sweden

Conditions of the prograde, peak‐pressure and part of the decompressional P–T path of two Precambrian eclogites in the eastern Sveconorwegian orogen have been determined using the pseudosection approach. Cores of garnet from a Fe–Ti‐rich eclogite record a first prograde and syn‐deformational stage along a Barrovian gradient from ~670 °C and 7 kbar to 710 °C and 8.5 kbar. Garnet rims grew during further burial to 16.5–19 kbar at ~850–900 °C, along a steep dP/dT gradient. The pseudosection model of a kyanite‐bearing eclogite sample of more magnesian bulk composition confirms the peak conditions. Matrix reequilibration associated with subsequent near‐isothermal decompression and partial exhumation produced plagioclase‐bearing symplectites replacing kyanite and clinopyroxene at an estimated 850–870 °C and 10–11 kbar. The validity of the pseudosections is discussed in detail. It is shown that in pseudosection modelling the fractionation of FeO in accessory sulphides may cause a significant shift of field boundaries (here displaced by up to 1.5 kbar and 70 °C) and must not be neglected. Fast burial, exhumation and subsequent cooling are supported by the steepness of both the prograde and the decompressional P–T paths as well as the preservation of garnet growth zoning and the symplectitic reaction textures. These features are compatible with deep tectonic burial of the eclogite‐bearing continental crust as part of the underthrusting plate (Eastern Segment, continent Baltica) in a collisional setting that led to an effectively doubled crustal thickness and subsequent exhumation of the eclogites through tectonic extrusion. Our results are in accordance with regional structural and petrological relationships, which demonstrate foreland‐vergent partial exhumation of the eclogite‐bearing nappe along a basal thrust zone and support a major collisional stage at c. 1 Ga. We argue that the similarities between Sveconorwegian and Himalayan eclogite occurrences emphasize the modern style of Grenvillian‐aged tectonics.     

Metamorphism of high‐P metagreywacke from the Eastern Himalayan syntaxis: phase equilibria and P–T path

High‐pressure (HP) metagreywacke from the Namche Barwa Complex, Eastern Himalayan Syntaxis (EHS), consists of garnet, biotite, plagioclase, quartz, rutile and ilmenite with or without K‐feldspar, sillimanite, cordierite, spinel and orthopyroxene. Two types of metagreywacke are recognized: medium‐temperature (MT) and high‐temperature (HT) types. Garnet in the MT metagreywacke shows significant growth zoning and contains lower MgO than the weakly zoned garnet in the HT metagreywacke. Petrographic observations and phase equilibria modelling for four representative samples indicate that both types of metagreywacke experienced clockwise P–T paths subdivided into three stages: stage I is the pre‐peak prograde to pressure peak (P_max) stage characterized by progressive increase in P–T conditions. The P_max conditions are estimated using the garnet composition with maximum CaO, being 12.5–13.5 kbar and 685–725 °C for the MT metagreywacke, and 15–16 kbar and 825–835 °C for the HT one. Stage II is the post‐P_max decompression with heating or near‐isothermal to T_max stage and the T_max conditions, constrained using the garnet compositions with maximum MgO, are 11 kbar and 760 °C for the MT metagreywacke, and ~12 kbar and 830–845 °C for the HT one. The modelled mineral assemblages at T_max are garnet + biotite + K‐feldspar + rutile + plagioclase ± ilmenite in the presence of melt for both types of metagreywacke, consistent with the petrographic observations. Stage III is the post‐T_max retrograde metamorphism, characterized by decompression and cooling. The modelling suggests that the melts with high Na/K ratios (1.7–5.2) have been produced during stages I and II, which could be responsible for the formation of sodium‐rich leucogranites. This study and previous results indicate that the Higher Himalayan Crystallines in the EHS consist of MT–HP and HT–HP metamorphic units separated by a speculated tectonic contact. Petrological and structural discontinuities within the EHS cannot be easily interpreted with ‘tectonic aneurysm’ model.     

Petrology,geochemistry and P–T–t path of lawsonite‐bearing retrograded eclogites in the Changning–Menglian orogenic belt,southeast Tibetan Plateau

The Changning–Menglian orogenic belt (CMOB) in the southeastern Tibetan Plateau, is considered as the main suture zone marking the closure of the Palaeo‐Tethys Ocean between the Indochina and Sibumasu blocks. Here, we investigate the recently discovered retrograded eclogites from this suture zone in terms of their petrological, geochemical and geochronological features, with the aim of constraining the metamorphic evolution and protolith signature. Two types of metabasites are identified: retrograded eclogites and mafic schists. The igneous precursors of the retrograded eclogites exhibit rare earth element distribution patterns and trace element abundance similar to those of ocean island basalts, and are inferred to have been derived from a basaltic seamount in an intra‐oceanic tectonic setting. In contrast, the mafic schists show geochemical affinity to arc‐related volcanics with the enrichment of Rb, Th and U, and depletion of Nb, Ta, Zr, Hf and Ti, and their protoliths possibly formed at an active continental margin tectonic setting. Retrograded eclogites are characterized by peak metamorphic mineral assemblages of garnet, omphacite, white mica, lawsonite and rutile, and underwent five‐stage metamorphic evolution, including pre‐peak prograde stage (M₁) at 18–19 kbar and 400–420°C, peak lawsonite‐eclogite facies (M₂) at 24–26 kbar and 520–530°C, post‐peak epidote–eclogite facies decompression stage (M₃) at 13–18 kbar and 530–560°C, subsequent amphibolite facies retrogressive stage (M₄) at 8–10 kbar and 530–600°C, and late greenschist facies cooling stage (M₅) at 5–8 kbar and 480–490°C. Laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) U–Pb spot analyses of zircon show two distinct age groups. The magmatic zircon from both the retrograded eclogite and mafic schist yielded protolith ages of 451 ± 3 Ma, which is consistent with the ages of Early Palaeozoic ophiolitic complexes and ocean island sequences in the CMOB reported in previous studies. In contrast, metamorphic zircon from the retrograded eclogite samples yielded consistent Triassic metamorphic ages of 246 ± 2 and 245 ± 2 Ma, which can be interpreted as the timing of closure of the Palaeo‐Tethys Ocean. The compatible peak metamorphic mineral assemblages, P–T–t paths and metamorphic ages, as well as the similar protolith signatures for the eclogites in the CMOB and Longmu Co–Shuanghu suture (LCSS) suggest that the two belts formed part of a cold oceanic subduction system in the Triassic. The main suture zone of the Palaeo‐Tethyan domain extends at least 1,500 km in length from the CMOB to the LCSS in the Tibetan Plateau. The identification of lawsonite‐bearing retrograded eclogites in the CMOB provides important insights into the tectonic framework and complex geological evolution of the Palaeo‐Tethys.     

New, high-precision P–T estimates for Oman blueschists: implications for obduction, nappe stacking and exhumation processes

Oman blueschists and eclogites lie below the obduction nappe of the Semail ophiolite in one of the key areas on Earth for the study of plate convergence. Here new metamorphic and tectonic constraints are provided for the central, yet poorly constrained Hulw unit, sandwiched between the low‐grade units (～10 kbar, <300 °C) and the As Sifah eclogites (P_max ～ 23 kbar; T_max ～ 600 °C). TWEEQU multi‐equilibrium thermobarometry, using both compositional mapping and spot analyses, and Raman spectroscopy of carbonaceous material yield a high‐precision P–T path for the Hulw and As Sheikh units and reveal that they shared a common P–T history in four stages: (i) a pressure decrease from 10–12 kbar, 250–300 °C to 7–9 kbar, 300–350 °C; (ii) almost isobaric heating at ～8–10 kbar from 300–350 °C to 450–500 °C; (iii) a pressure decrease at moderate temperatures (～450–500 °C); and (iv) isobaric cooling at ～5–6 kbar from 450–500 to 300 °C. No significant pressure or temperature gap is observed across the upper plate–lower plate discontinuity to the north and west of the Hulw unit. The combination of tectonic and P–T data constrains the stacking chronology of the three main metamorphic units comprising the Saih Hatat window (i.e. the Ruwi‐Quryat, the Hulw‐As Sheikh and the Diqdah‐As Sifah units). These results strengthen the view that the tectonic and metamorphic data are conveniently accounted for by a simple, N‐vergent continental subduction of the passive Arabian margin below the obduction nappe along a cold P–T gradient.     

The Plankogel detachment of the Eastern Alps: petrological evidence for an orogen‐scale extraction fault

The so‐called Plankogel detachment is an east‐west trending, south‐dipping low‐angle structure that juxtaposes the high‐P rocks of the eclogite type locality of the eastern European Alps against amphibolite facies rocks to the south. It occurs in both the Saualpe and Koralpe Complex in eastern Austria. During Cretaceous intracontinental subduction, the footwall and the hangingwall units of the Plankogel detachment were buried to different crustal levels as inferred by pseudosection modelling and conventional thermobarometry: ~23–24 kbar and 640–690 °C for the eclogite facies units in the footwall of the detachment and ~12–14 kbar and 550–580 °C for the amphibolite facies metapelites in the hangingwall. Despite the different peak metamorphic conditions, both sides of the detachment display a common overprint at conditions of ~10 kbar and 580–650 °C. From this, we infer a two‐stage exhumation process and suggest that this two‐stage process is best interpreted tectonically in terms of slab extraction during Eoalpine subduction. The first stage of exhumation occurred due to the downward (southward) extraction of a lithospheric slab that was localized in the trace of the Plankogel detachment. The later stage, however, is attributed to more regional erosion‐ or extension‐driven processes. Since the Plankogel detachment is geometrically related to a crustal‐scale shear zone further north (the Plattengneiss shear zone), we suggest that both structures are part of the same extraction fault system along which the syn‐collisional exhumation of the Eoalpine high‐P units of the Eastern Alps occurred. The suggested model is consistent with both the mylonitic texture of the Plattengneiss shear zone and the overall ambiguous shear sense indicators present in the entire region.     

Pressure–temperature–structural distance relationships within Greater Himalayan rocks in eastern Bhutan: implications for emplacement models

In the Himalayan orogen, Greater Himalayan (GH) rocks were buried to mid‐ to lower‐crustal levels and are now exposed across the strike of the orogen. Within the eastern Himalaya, in the Kingdom of Bhutan, the GH is divided into structurally lower (lower‐GH) and upper (upper‐GH) levels by the Kakhtang thrust (KT). Pressure–temperature estimates from lower‐ and upper‐GH rocks collected on two transects across the KT yield similar P–T–structural distance trends across each transect. In the eastern transect, temperatures are similar (from 730 to 650 °C) over a structural thickness of ~11 km, but peak pressures decrease from ~10 to 6 kbar with increasing structural level. In comparison, peak temperatures in the central Bhutan transect are similar (from 730 to 600 °C), but pressures decrease from 10 to 6.5 kbar with increasing structural level over a structural thickness of ~6 km. The structurally highest sample reveals slightly higher pressures of 8.0 kbar in comparison to pressures of ~6.5 kbar for samples collected from within the KT zone, ~4 km below. Within each transect, there are increases in pressure ± temperature within the overall upright P–T gradient that may demarcate intra‐GH shear zone(s). These P–T results combined with evidence that the timing of initial melt crystallization becomes older with increasing structural level suggest that the intra‐GH shear zones emplaced deeper GH rocks via progressive ductile underplating. These shear zones, including the KT, likely aided in the initial emplacement and construction of the GH as a composite tectonic unit during the Late Oligocene to Early Miocene, from c. 27 to 16 Ma.     

P–T–t estimation of deformation in low‐grade quartz‐feldspar‐bearing rocks using thermodynamic modelling and 40Ar/39Ar dating techniques: example of the Plan‐de‐Phasy shear zone unit (Briançonnais Zone,Western Alps)

Pressure–Temperature–time (P–T–t) estimates of the syn‐kinematic strain at the peak‐pressure conditions reached during shallow underthrusting of the Briançonnais Zone in the Alpine subduction zone was made by thermodynamic modelling and ⁴⁰Ar/³⁹Ar dating in the Plan‐de‐Phasy unit (SE of the Pelvoux Massif, Western Alps). The dated phengite minerals crystallized syn‐kinematically in a shear zone indicating top‐to‐the‐N motion. By combining X‐ray mapping with multi‐equilibrium calculations, we estimate the phengite crystallization conditions at 270 ± 50 °C and 8.1 ± 2 kbar at an age of 45.9 ± 1.1 Ma. Combining this P–T–t estimate with data from the literature allows us to constrain the timing and geometry of Alpine continental subduction. We propose that the Briançonnais units were scalped on top of the slab during ongoing continental subduction and exhumed continuously until collision.     

Tectonometamorphic evolution of the Atbashi high‐P units (Kyrgyz CAOB,Tien Shan): Implications for the closure of the Turkestan Ocean and continental subduction–exhumation of the South Kazakh continental margin

The South Tien Shan (STS) belt results from the last collision event in the western Central Asian Orogenic Belt (CAOB). Understanding its formation is of prime importance in the general framework of the CAOB. The Atbashi Range preserves high‐P (HP) rocks along the STS suture, but still, its global metamorphic evolution remains poorly constrained. Several HP units have been identified: (a) a HP tectonic mélange including boudins of mafic eclogites in a sedimentary matrix, (b) a large (>100 km long) high‐P metasedimentary unit (HPMU) and (c) a lower blueschist facies accretionary prism. Raman Spectroscopy on carbonaceous material combined with phengite and chlorite multiequilibria and isochemical phase diagram modelling indicates that the HPMU recorded homogeneous P–T conditions of 23–25 kbar and 560–570°C along the whole unit. ⁴⁰Ar/³⁹Ar dating on phengite from the HPMU ranges between 328 and 319 Ma at regional scale. These ages are interpreted as (re‐) crystallization ages of phengite during T_max conditions at a pressure range of 20–25 kbar. Thermobarometry on samples from the HP tectonic mélange provides similar metamorphic peak conditions. Thermobarometry on the blueschist to lower greenschist facies accretionary prism indicates that it underwent P–T conditions of 5–6 kbar and 290–340°C, highlighting a 17–20 kbar pressure gap between the HPMU‐tectonic mélange units and the accretionary prism. Comparison with available geochronological data suggests a very short time span between the prograde path (340 Ma), HP metamorphic peak (330 Ma), the T_max (328–319 Ma) and the final exhumation of the HPMU (303–295 Ma). Extrusion of the HPMU, accommodated by a basal thrust and an upper detachment, was driven by buoyant forces from 70–75 km up to 60 km depth, which directly followed continental subduction and detachment of the HPMU. At crustal depths, extrusion was controlled by collisional tectonics up to shallow levels. Lithological homogeneity of the HPMU and its continental‐derived character from the North Tien Shan suggest this unit corresponds to the hyper‐extended continental margin of the Kazakh continent, subducted southward below the north continental active margin of the Tarim craton. Integration of the available geological data allows us to propose a general geodynamic scenario for Tien Shan during the Carboniferous with a combination of (a) N‐dipping subduction below the Kazakh margin of Middle Tien Shan until 390–340 Ma and (b) S‐dipping subduction of remaining Turkestan marginal basins between 340 and 320 Ma.     

P–T–t–D record of crustal‐scale horizontal flow and magma‐assisted doming in the SW Mongolian Altai

The Chandman massif, a typical structure of the Mongolian Altai, consists of a migmatite–magmatite core rimmed by a lower grade metamorphic envelope of andalusite and cordierite‐bearing schists. The oldest structure in the migmatite–magmatite core is a subhorizontal migmatitic foliation S1 parallel to rare granitoid sills. This fabric is folded by upright folds F2 and transposed into a vertical migmatitic foliation S2 that is syn‐tectonic, with up to several tens of metres thick granitoid sills. Sillimanite–ilmenite–magnetite S1 inclusion trails in garnet constrain the depth of equilibration during the S1 fabric to 6–7 kbar at 710–780 °C. Reorientation of sillimanite into the S2 fabric indicates that the S1–S2 fabric transition occurred in the sillimanite stability field. The presence of cordierite, and garnet rim chemistry point to decompression to 3–4 kbar and 680–750 °C during development of the S2 steep fabric, and post‐tectonic andalusite indicates further decompression to 2–3 kbar and 600–650 °C. Widespread crystallization of post‐tectonic muscovite is explained by the release of H₂O from crystallizing partial melt. In the metamorphic envelope the subhorizontal metamorphic schistosity S1 is heterogeneously affected by upright F2 folds and axial planar subvertical cleavage S2. In the north, the inclusion trails in garnet are parallel to the S1 foliation, and the garnet zoning indicates nearly isobaric heating from 2.5 to 3 kbar and 500–530 °C. Cordierite contains crenulated S1 inclusion trails and has pressure shadows related to the formation of the S2 fabric. The switch from the S1 to the S2 foliation occurred near 2.5–3 kbar and 530–570 °C; replacement of cordierite by fine‐grained muscovite and chlorite indicates further retrogression and cooling. In the south, andalusite containing crenulated inclusion trails of ilmenite and magnetite indicates heating during the D2 deformation at 3–4 kbar and 540–620 °C. Monazite from a migmatite analysed by LASS yielded elevated HREE concentrations. The grain with the best‐developed oscillatory zoning is 356 ± 1.0 [±7] Ma (²⁰⁷Pb‐corrected ²³⁸U/²⁰⁶Pb), considered to date the crystallization from melt in the cordierite stability ~680 °C and 3.5 kbar, whereas the patchy BSE‐dark domains give a date of 347 ± 4.2 [±7] Ma interpreted as recrystallization at subsolidus conditions. The earliest sub‐horizontal fabric is associated with the onset of magmatism and peak of P–T conditions in the deep crust, indicating important heat input associated with lower crustal horizontal flow. The paroxysmal metamorphic conditions are connected with collapse of the metamorphic structure, an extrusion of the hot lower crustal rocks associated with vertical magma transfer and a juxtaposition of the hot magmatite–migmatite core with supracrustal rocks. This study provides information about tectono‐thermal history and time‐scales of horizontal flow and vertical mass and heat transfer in the Altai orogen. It is shown that, similar to collisional orogens, doming of partially molten rocks assisted by syn‐orogenic magmatism can be responsible for the exhumation of orogenic lower crust in accretionary orogenic systems.     

A window into the Early to mid‐Cretaceous infrastructure of the Yukon‐Tanana terrane recorded in multi‐stage garnet of west‐central Yukon,Canada

Amphibolite facies metasedimentary schists within the Yukon‐Tanana terrane in the northern Canadian Cordillera reveal a two‐stage, polymetamorphic garnet growth history. In situ U‐Th‐Pb Sensitive High Resolution Ion Microprobe dating of monazite provide timing constraints for the late stages of garnet growth, deformation and subsequent decompression. Distinct textural and chemical growth zoning domains, separated by a large chemical discontinuity, reveal two stages of garnet growth characterized in part by: (i) a syn‐kinematic, inclusion‐rich stage‐1 garnet core; and (ii) an inclusion‐poor, stage‐2 garnet rim that crystallized with syn‐ to post‐kinematic staurolite and kyanite. Phase equilibria modelling of garnet molar and compositional isopleths suggest stage‐1 garnet growth initiated at ~600 °C, 8 kbar along a clockwise P–T path. Growth of the compositionally distinct, grossular‐rich, pyrope‐poor inner portion of the stage‐2 overgrowth is interpreted to have initiated at higher pressure and/or lower temperature than the stage‐1 core along a separate P–T loop, culminating at peak P–T conditions of ~650–680 °C and 9 kbar. Stage‐2 metamorphism and the waning development of a composite transposition foliation (S_T) are dated at c. 118 Ma from monazite aligned parallel to S_T, and inclusions in syn‐ to post‐S_T staurolite and kyanite. Slightly younger ages (c. 112 Ma) are obtained from Y‐rich monazite that occurs within resorbed areas of both stage‐1 and stage‐2 garnet, together with retrograde staurolite and plagioclase. The younger ages obtained from these texturally and chemically distinct grains are interpreted, with the aid of phase equilibria calculations, to date the growth of monazite from the breakdown of garnet during decompression at c. 112 Ma. Evidence for continued near‐isothermal decompression is provided by the presence of retrograde sillimanite, and cordierite after staurolite, which indicates decompression below ~4–5 kbar prior to cooling below ~550 °C. As most other parts of the Yukon‐Tanana terrane were exhumed to upper crustal levels in the Early Jurassic, these data suggest this domain represents a tectonic window revealing a much younger, high‐grade tectono‐metamorphic core (infrastructure) within the northern Cordilleran orogen. This window may be akin to extensional core complexes identified in east‐central Alaska and in the southeastern Canadian Cordillera.     

Amphibole-derived evidence of medium <Emphasis Type="Italic">P/T</Emphasis> metamorphic ratio in Alpujárride and Federico “H<Emphasis Type="Italic">P</Emphasis>” units (Western Betic-Northern Rif,Spain and Morocco): possible interpretations

The significance of zoned Ca-amphibole found in metapelites, quartzites, and synfolial veins of the Internal Zone of the Betic-Rif range (Federico units from Northern Rif and Alpujárride units from Western Betic) in the Alpine tectono-metamorphic evolution of these units is discussed for first time. Typical Al-rich metapelites from both areas show assemblages consisting of white mica and chlorite, with sporadic kyanite and chloritoid. Nevertheless, in the Rif zone, phyllites and synfolial veins of Permo-Triassic units show the assemblage pumpellyite + epidote + actinolite. In the Jubrique area (Betic zone), Ca-rich phyllites, fine-grained quartzites, and quartz veins show assemblages consisting of Ca-amphibole, plagioclase, epidote, titanite, chlorite, and quartz. The Al-in-amphibole thermobarometer defines clockwise pressure–temperature paths with a range of prograde temperatures and pressures between 272°C-1.2 kbar and 484°C-3.2 kbar for the Federico unit and between 274°C-1.1 kbar and 620°C-6.1 kbar in the Jubrique unit. Amphiboles from both areas define prograde pressure–temperature paths typical of Barrovian-type metamorphism. This finding contrasts with previous estimates, which deduced high-pressure conditions in both areas. The described amphiboles indicate metamorphic conditions similar to those found in the tectonically deepest complex (Veleta complex) of the Betic Internal Zone and suggest formation during a medium P/T Alpine event, which has not been previously identified in the Alpujárride complex.     

High‐pressure mineral assemblage in granitic rocks from continental units,Alpine Corsica,France

The Popolasca–Francardo area of northern Corsica contains an assemblage of continental tectonic units affected by an Alpine deformation. In one of these units, Unit II, previously regarded as weakly metamorphosed, a metamorphic mineral assemblage characterized by sodic amphibole, phengite, quartz, albite and epidote has been found in an aplite dyke that cuts the dominant granitoids. Peak‐metamorphic temperature and pressure conditions of 300–370°C and 0.50–0.80 GPa, respectively, have been determined. This finding indicates that a continuous belt of continental slices, characterized by high‐pressure, low‐temperature metamorphism of Tertiary age, extends from the Tenda Massif in the north to the Corte area in the south, thus placing additional constraints on the tectonic evolution of Alpine Corsica. Copyright © 2005 John Wiley & Sons, Ltd.     

Monazite in a Variscan mylonitic paragneiss from the Münchberg Metamorphic Complex (NE Bavaria) records Cadomian protolith ages

Small oval‐shaped, unshielded monazite grains found in a Variscan garnet–muscovite‐bearing mylonitic paragneiss from the Liegendserie unit of the Münchberg Metamorphic Complex in the northwestern Bohemian Massif, central Europe, yield only pre‐Variscan ages. These ages, determined with the electron microprobe, have maxima at c. 545, 520 and 495 Ma and two side‐maxima at 455 and 575 Ma, and are comparable with previously determined ages of detrital zircon reported from paragneisses elsewhere in the NW Bohemian Massif. The pressure (P)–temperature (T) history of this mylonitic paragneiss, determined from contoured P–T pseudosections, involved an initial stage at 6 kbar/600 °C, reaching peak P–T conditions of 12.5 kbar/670 °C with partial melting, followed by mylonitization and retrogression to 9 kbar/610 °C. The monazite, representing detrital grains derived from igneous rocks of a Cadomian provenance between 575 and 455 Ma, has survived these Variscan metamorphic/deformational events unchanged because this mineral has probably never been outside its P–T stability field during metamorphism.     

P–T–t–d evolution of orogenic middle crust of the Roc de Frausa Massif (Eastern Pyrenees): a result of horizontal crustal flow and Carboniferous doming?

Structural, petrological and textural studies are combined with phase equilibria modelling of metapelites from different structural levels of the Roc de Frausa Massif in the Eastern Pyrenees. The pre‐Variscan lithological succession is divided into the Upper, Intermediate and Lower series by two orthogneiss sheets and intruded by Variscan igneous rocks. Structural analysis reveals two phases of Variscan deformation. D1 is marked by tight to isoclinal small‐scale folds and an associated flat‐lying foliation (S1) that affects the whole crustal section. D2 structures are characterized by tight upright folds facing to the NW with steep NE–SW axial planes. D2 heterogeneously reworks the D1 fabrics, leading to an almost complete transposition into a sub‐vertical foliation (S2) in the high‐grade metamorphic domain. All structures are affected by late open to tight, steeply inclined south‐verging NW–SE folds (F3) compatible with steep greenschist facies dextral shear zones of probable Alpine age. In the micaschists of the Upper series, andalusite and sillimanite grew during the formation of the S1 foliation indicating heating from 580 to 640 °C associated with an increase in pressure. Subsequent static growth of cordierite points to post‐D1 decompression. In the Intermediate series, a sillimanite–biotite–muscovite‐bearing assemblage that is parallel to the S1 fabric is statically overgrown by cordierite and K‐feldspar. This sequence points to ~1 kbar of post‐D1 decompression at 630–650 °C. The Intermediate series is intruded by a gabbro–diorite stock that has an aureole marked by widespread migmatization. In the aureole, the migmatitic S1 foliation is defined by the assemblage biotite–sillimanite–K‐feldspar–garnet. The microstructural relationships and garnet zoning are compatible with the D1 pressure peak at ~7.5 kbar and ~750 °C. Late‐ to post‐S2 cordierite growth implies that F2 folds and the associated S2 axial planar leucosomes developed during nearly isothermal decompression to <5 kbar. The Lower series migmatites form a composite S1–S2 fabric; the garnet‐bearing assemblage suggests peak P–T conditions of >5 kbar at suprasolidus conditions. Almost complete consumption of garnet and late cordierite growth points to post‐D2 equilibration at <4 kbar and <750 °C. The early metamorphic history associated with the S1 fabric is interpreted as a result of horizontal middle crustal flow associated with progressive heating and possible burial. The upright F2 folding and S2 foliation are associated with a pressure decrease coeval with the intrusion of mafic magma at mid‐crustal levels. The D2 tectono‐metamorphic evolution may be explained by a crustal‐scale doming associated with emplacement of mafic magmas into the core of the dome.     

Tectonic evolution of Proterozoic rocks in the Cimarron Mountains, northern New Mexico, USA

Abstract Portions of three Proterozoic tectonostratigraphic sequences are exposed in the Cimarron Mountains of New Mexico. The Cimarron River tectonic unit has affinities to a convergent margin plutonic/volcanic complex. Igneous hornblende from a quartz diorite stock records an emplacement pressure of 2–2.6 kbar. Rocks within this unit were subsequently deformed during a greenschist facies regional metamorphism at 4–5 kbar and 330 ± 50° C. The Tolby Meadow tectonic unit consists of quartzite and schist. Mineral assemblages are indicative of regional metamorphism at pressures near 4 kbar and temperatures of 520 ± 20° C. A low-angle ductile shear zone separates this succession from gneisses of the structurally underlying Eagle Nest tectonic unit. Gneissic granite yields hornblende pressures of 6–8 kbar. Pelitic gneiss records regional metamorphic conditions of 6–7 kbar and 705 ± 15° C, overprinted by retrogression at 4 kbar and 530 ± 10° C. Comparison of metamorphic and retrograde conditions indicates a P–T path dominated by decompression and cooling. The low-angle ductile shear zone represents an extensional structure which was active during metamorphism. This extension juxtaposed the Tolby Meadow and Eagle Nest units at 4 kbar and 520° C. Both units were later overprinted by folding and low-grade metamorphism, and then were emplaced against the Cimarron River tectonic unit by right-slip movement along the steeply dipping Fowler Pass shear zone. An argon isotope-correlation age obtained from igneous hornblende dates plutonism in the Cimarron River unit at 1678 Ma. Muscovite associated with the greenschist facies metamorphic overprint yields a ⁴⁰ Ar/³⁹ Ar plateau age of 1350 Ma. By contrast, rocks within the Tolby Meadow and Eagle Nest units yield significantly younger argon cooling ages. Hornblende isotope-correlation ages of 1394–1398 Ma are interpreted to date cooling during middle Proterozoic extension. Muscovite plateau ages of 1267–1257 Ma appear to date cooling from the low-grade metamorphic overprint. The latest ductile movement along the Fowler Pass shear zone post-dated these cooling ages. Argon released from muscovites of the Eagle Nest/Tolby Meadow composite unit, at low experimental temperatures, yields apparent ages of c. 1100 Ma. Similar ages are not obtained north-east of the Fowler Pass shear zone, suggesting movement more recently than 1100 Ma.     

Decoding the complex internal chemical structure of garnet porphyroblasts from the Zermatt area,Western Alps

Garnet is a prototypical mineral in metamorphic rocks because it commonly preserves chemical and textural features that can be used for untangling its metamorphic development. Large garnet porphyroblasts may show extremely complex internal structures as a result of a polycyclic growth history, deformation, and modification of growth structures by intra‐ and intercrystalline diffusion. The complex internal structure of garnet porphyroblasts from garnet–phengite schists (GPS) of the Zermatt area (Western Alps) has been successfully decoded. The centimetre‐sized garnet porphyroblasts are composed of granulite facies garnet fragments overgrown by a younger generation of grossular‐rich eclogite facies garnet. The early granulite facies garnet (G‐Grt) formed from low‐P, high‐T metamorphism during a pre‐Alpine orogenic event. The late garnet (E‐Grt) is typical of high‐pressure, low‐temperature (HPLT) metamorphism and can be related to Alpine subduction of the schists. Thus, the garnet of the GPS are polycyclic (polymetamorphic). G‐Grt formation occurred at ~670 MPa and 780°C, E‐Grt formed at ~1.7 GPa and 530°C. The G‐Grt is relatively rich in Prp and poor in Grs, while E‐Grt is rich in Grs and poor in Prp. The Alm content (mol.%) of G‐Grt is 68 of E‐Grt 55. After formation of E‐Grt between and around fragmented G‐Grt at 530°C, the GPS have been further subducted and reached a maximum temperature of 580°C before exhumation started. Garnet composition profiles indicate that the initially very sharp contacts between the granulite facies fragments of G‐Grt and fracture seals of HPLT garnet (E‐Grt) have been modified by cation diffusion. The profiles suggest that Ca did not exchange at the scale of 1 µm, whereas Fe and Mg did efficiently diffuse at the derived maximum temperature of 580°C for the GPS at the scale of 7–8 µm. The Grt–Grt diffusion profiles resulted from spending c. 10 Ma at 530–580°C along the P–T–t path. The measured Grt composition profiles are consistent with diffusivities of log D_MgFe = ?25.8 m²/s from modelled diffusion profiles. Mg loss by diffusion from G‐Grt is compensated by Fe gain by diffusion from E‐Grt to maintain charge balance. This leads to a distinctive Fe concentration profile typical of uphill diffusion.     

Constraints from monazite and xenotime growth modelling in the MnCKFMASH‐PYCe system on the P–T path of a metapelite from Shillong‐Meghalaya Plateau: implications for the Indian shield assembly

The Palaeo‐Mesoproterozoic metapelite granulites from northern Garo Hills, western Shillong‐Meghalaya Gneissic Complex (SMGC), northeast India, consist of resorbed garnet, cordierite and K‐feldspar porphyroblasts in a matrix comprising shape‐preferred aggregates of biotite±sillimanite+quartz that define the penetrative gneissic fabric. An earlier assemblage including biotite and sillimanite occurs as inclusions within the garnet and cordierite porphyroblasts. Staurolite within cordierite in samples without matrix sillimanite is interpreted to have formed by a reaction between the sillimanite inclusion and the host cordierite during retrogression. Accessory monazite occurs as inclusions within garnet as well as in the matrix, whereas accessory xenotime occurs only in the matrix. The monazite inclusions in garnet contain higher Ca, and lower Y and Th/U than the matrix monazite outside resorbed garnet rims. On the other hand, matrix monazite away from garnet contains low Ca and Y, and shows very high Th/U ratios. The low Th/U ratios (<10) of the Y‐poor garnet‐hosted monazite indicate subsolidus formation during an early stage of prograde metamorphism. A calculated P–T pseudosection in the MnCKFMASH‐PYCe system indicates that the garnet‐hosted monazite formed at <3 kbar/600 °C (Stage A). These P–T estimates extend backward the previously inferred prograde P–T path from peak anatectic conditions of 7–8 kbar/850 °C based on major mineral equilibria. Furthermore, the calculated P–T pseudosections indicate that cordierite–staurolite equilibrated at ~5.5 kbar/630 °C during retrograde metamorphism. Thus, the P–T path was counterclockwise. The Y‐rich matrix monazite outside garnet rims formed between ~3.2 kbar/650 °C and ~5 kbar/775 °C (Stage B) during prograde metamorphism. If the effect of bulk composition change due to open system behaviour during anatexis is considered, the P–T conditions may be lower for Stage A (<2 kbar/525 °C) and Stage B (~3 kbar/600 °C to ~3.5 kbar/660 °C). Prograde garnet growth occurred over the entire temperature range (550–850 °C), and Stage‐B monazite was perhaps initially entrapped in garnet. During post‐peak cooling, the Stage‐B monazite grains were released in the matrix by garnet dissolution. Furthermore, new matrix monazite (low Y and very high Th/U ≤80, ~8 kbar/850–800 °C, Stage C), some monazite outside garnet rims (high Y and intermediate Th/U ≤30, ~8 kbar/800–785 °C, Stage D), and matrix xenotime (<785 °C) formed through post‐peak crystallization of melt. Regardless of textural setting, all monazite populations show identical chemical ages (1630–1578 Ma, ±43 Ma). The lithological association (metapelite and mafic granulites), and metamorphic age and P–T path of the northern Garo Hills metapelites and those from the southern domain of the Central Indian Tectonic Zone (CITZ) are similar. The SMGC was initially aligned with the southern parts of CITZ and Chotanagpur Gneissic Complex of central/eastern India in an ENE direction, but was displaced ~350 km northward by sinistral movement along the north‐trending Eastern Indian Tectonic Zone in Neoproterozoic. The southern CITZ metapelites supposedly originated in a back‐arc associated with subducting oceanic lithosphere below the Southern Indian Block at c. 1.6 Ga during the initial stage of Indian shield assembly. It is inferred that the SMGC metapelites may also have originated contemporaneously with the southern CITZ metapelites in a similar back‐arc setting.