2013年8月河北蔚县小震群遗漏地震检测与发震构造分析

华北地区近年来小震群活动频繁, 在有数字波形记录的中强地震相对缺乏的背景下, 小震群发震构造精细研究可为华北地区地震危险性分析和地震趋势判断提供重要依据. 本文利用匹配滤波技术对2013年8月22—25日河北蔚县小震群遗漏地震事件进行检测, 并通过地震精定位和震源机制求解分析此次震群的发震构造. 计算结果显示, 通过互相关扫描检测到18次被地震台网常规分析遗漏的地震, 约为地震目录给出的13次地震事件的1.38倍. 该震群发震构造有北东向和北西向两组断裂, 震群活动前期以北东向构造活动为主, 后期地震主要发生在北西向构造, 北西向构造在此次震群活动中地震频度和强度均高于北东向构造. 震源机制计算结果显示北西向构造发震机制以正断拉张为主.      

DISCUSSION ON THE SEISMOGENIC STRUCTURE OF ZHAN-JIANG BAY AREA FROM THE VIEW OF DEEP FAULT SYSTEM INTERPRETED BASED ON THE GRAVITY DATA

The neotectonics in Zhanjiang Bay area is almost the inferred faults and there are not any active faults seen on the ground surface. So it is difficult for research on the seismogenic structure. This paper analyzes and interpretes the gravity data that can reflect the feature of deep faults and then discusses the seismogenic structure of Zhanjiang Bay area in combination with its geology and earthquake activity. There is a huge NEE-trending high gravity gradient belt lying in the coastal region among Guangdong, Guangxi, and Hainan, and Zhanjiang Bay is located in this gravity gradient belt. We analyzed and interpreted more than eighty images obtained with many different methods one by one, then, got the result that Zhanjiang Bay area is embraced by two giant fault belts trending in the NEE and NW direction respectively, and its interior is crossed over by the NE-trending fault belt. These three fault belts are well shown in the gravity images, especially the NEE-trending fault belt and NW one. The gravity isolines and gradient belts or the thick black stripes of the NEE-and NW-trending fault belts are displayed apparently. Also, these gravity structures are good in continuity, extend vastly and cut deeply. What is more, the NEE-trending fault belt plays a leading and region-controlling part. It shows good continuity, and cuts off the NW-and NE-trending faults frequently and intensively. The NW-trending fault belt also is good in continuity and cuts the NEE-and NE-trending faults relatively frequently and strongly, but it is restricted by the NEE-trending one. Last, the continuity of the NE-trending fault is worse and the strength cutting off NE-and NW-trending faults is significantly weak, just in some segments and in the shallow positions. According to the characteristics above and combined with the analyses of geological structure and earthquake activity, the conclusion can be drawn that the NEE-trending fault is the controlling structure and the main seismogenic structure in Zhanjiang Bay area, and the NW-trending fault is the second one. They conjugate and act together. Therefore, Zhanjiang Bay has the tectonic condition for generating M_S=6.5 earthquakes.     

Two-step interface and velocity inversion

This paper studies the computation method of two-step inversion of interface and velocity in a region. The 3-D interface is described by a segmented incomplete polynomial; while the reconstruction of 3-D velocity is accomplished by the principle of least squares in functional space. The computation is carried out in two steps. The first step is to inverse the shape of 3-D interface; while the second step is to do 3-D velocity inversion by distributing the remaining residual errors of travel time in accordance with their weights. The data of seismic sounding in the Tangshan-Luanxian seismic region are processed, from which the 3-D structural form in depth of the Tangshan seismic region and the 3-D velocity distribution in the crust below the Tangshan-Luanxian seismic region are obtained. The result shows that the deep 3-D structure in the Tangshan seismic region trends NE on the whole and the structure sandwiched between the NE-trending Fengtai-Yejituo fault and the NE-trending Tangshan fault is an uplifted zone of the Moho. In the 3-D velocity structure of middle-lower crust below that region, there is an obvious belt of low-velocity anomaly to exist along the NE-trending Tangshan fault, the position of which tallies with that of the Tangshan seismicity belt. The larger block of low-velocity anomaly near Shaheyi corresponds to a denser earthquake distribution. In that region, there is an NW-trending belt of high-velocity anomaly, probably a buried fault zone. The lower crust below the epicentral region of the Tangshan M _S=7.8 earthquake is a place where the NE-trending belt of low-velocity anomaly meets the NW-trending belt of high-velocity anomaly. The two sets of structures had played an important role in controlling the preparation and occurrence of the M _S=7.8 Tangshan earthquake. Contribution RCEG97006, Research Center of Exploration Geophysics, China Seismological Bureau, China. This project is supported by the Chinese Joint Seismological Science Foundation.     

关于2021年5月滇西漾濞MS6.4地震序列特征及成因的初步研究

2021年5月21日21时48分在滇西苍山西麓漾濞地区发生MS6.4(MW6.1)强震,相关地震活动表现为一个典型的前震-主震-余震序列.本研究分别就该地震序列的构造背景、M1.0以上地震的双差定位、主要地震的矩张量反演和破裂传播方向、应力场反演及断层滑动趋势以及潮汐作用等方面进行了初步分析.矩张量反演结果表明,矩心深...     

Seismic analysis of the Xiluodu reservoir area and insights into the geometry of seismogenic faults

The Xiluodu (XLD) reservoir is the second largest reservoir in China and the largest in the Jinsha River basin. The occurrence of two M > 5 earthquakes after reservoir impoundment has aroused great interest among seismologists and plant operators. We comprehensively analyzed the seismicity of the XLD reservoir area using precise earthquake relocation results and focal mechanism solutions and found that the seismicity of this area was weak before impoundment. Following impoundment, earthquake activity increased significantly. The occurrence of M ≥ 3.5 earthquakes within five years of impoundment also appear to be closely related to rapid rises and falls in water level, though this correlation weakened after five years because earthquake activity was far from the reservoir area. Earthquakes in the XLD reservoir area are clustered; near the dam (Area A), small faults are intermittently distributed along the river, while Area B is composed of multiple NW-trending left-lateral strike-slip faults and a thrust fault and Area C is composed of a NW-trending left-lateral strike-slip main fault and a nearly EW-trending right-lateral strike-slip minor fault. The geometries of the deep and the shallow parts of the NW-trending fault differ. Under the action of the NW-trending background stress field, a series of NW-trending left-lateral strike-slip faults and NE-trending thrust faults in critical stress states were dislocated due to the stress caused by reservoir impoundment. The two largest earthquakes in the XLD reservoir area were tectonic earthquakes that were directly triggered by impoundment.     

鄂尔多斯北缘断陷盆地区强震孕育的卫星遥感影像研究

利用多时相、多波段卫星图像,研究1979年五原6.0级地震、1989年大同-阳高6.1级地震和1996年包头西6.4级地震震区的构造活动信息,结合前人的烈度调查资料,探讨这些强震发生的地质构造环境。研究表明:1979年五原6.0级地震发生在NE向海子堰断裂与NW向五原西断裂交会的部位。五原6.0级地震高烈度区等震线长轴呈NE向,与海子堰断裂一致,是五原地震的发震构造。1996年包头西6.4级地震发生在由陡崖和沟槽地貌显示的NEE向乌拉山北缘断裂与NW向新生砂石厂断裂交会的部位。包头西6.4级地震高烈度区等震线长轴呈NE向,与乌拉山北缘断裂接近,该断裂是包头西6.4级地震的发震构造。2次地震高烈度区长轴与低烈度区长轴走向相差近90°,这是因为除发震构造外,烈度区还受一组与之交会的共轭断裂活动的影响。1989年大同-阳高6.1级地震,发生在从六棱山腹地向大同-阳高盆地延伸的NNE向大王村-西要泉断裂上,该断裂是大同-阳高地震的发震构造     

海城、盖州地区地震震源机制及一致性参数特征研究

本文选取辽宁海城、 盖州地区(40°~41°N, 122°~123°E)作为研究区, 利用广义极性振幅技术(GPAT)方法, 反演得到研究区2012—2017年6月共184个地震震源机制解, 并利用Misfit角度分析震源机制一致性参数特征。 研究结果表明: ① 研究区地震震源机制解以走滑型和正断型为主。 海城地区地震震源机制解以NW—SE向节面的左旋走滑型和NWW向节面的正断型为主。 发震构造以NW向海城河断裂为主, NE向节面为主的地震可能受到NE向金州断裂带的控制。 ② 青石岭地区的发震构造为与九寨—盖县北段共轭的NW向未知断裂, 西海域的地震活动可能是NE向的雁式断裂和NW向共轭的未知断裂共同作用的结果。 ③ 震源机制一致性结果显示, 一致性增强后发生了震级相对较大的地震。 研究区的震源机制一致性较强, 表明该区域的应力较为集中。 但由于2016年以来活动趋于平静, 尚难以根据震源机制解一致性程度做出当前应力状态的判断。     

新丰江水库中上地壳P波三维速度结构特征及库水的渗透影响

利用震源位置和速度结构的联合反演得到2007年6月—2014年7月新丰江水库地区地震序列的震源位置及中上地壳P波三维速度结构模型,并进一步研究库区序列分布及速度结构特征.结果显示:库区中上地壳不同深度P波速度存在显著横向不均匀性,浅部库区速度高于周缘,在5~10 km上地壳从库坝下游白田至库尾锡场NW方向存在高速异常体以及2个低速间断区域,低速间断区分别位于人字石断裂与南山—坳头断裂交汇处以及1962年6.1级地震震源区,库水可能沿低速间断区的人字石断裂、石角—新港—白田断裂下渗至13~14 km的地壳.在10~14 km地壳以NE走向的大坪—岩前断裂为界,NW侧为最高速度6.2 km·s~(-1)的高速区域,SE侧从库区中部回龙至库坝下游白田为显著低速异常区域,是可能的库水渗透影响区域,亦是库区中强地震集中区.库区地震多发生在高速体内部、高低速过渡带或低速的渗水通道两侧.     

Structural analysis and interpretation of the surface deformation associated with the Ning’er, Yunnan Province, China M S6.4 earthquake of June 3, 2007

The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province MS6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, land-slide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mecha-nism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er MS6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of MS≥2 is 330°, and the focal depths are within the range of 3~12 km, predominantly within 3~10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic     

基于遥感影像研究宁波地区断裂活动性

利用遥感影像多分辨率、 多光谱以及多传感器相结合的方法, 对浙江宁波地区约1900 km²范围的断裂活动性进行分析判读。 根据断裂的影像特征, 将所判读的断裂分为晚更新世活动, 早、 中更新世活动及第四纪活动不明显3类, 同时对主要断裂的活动性进行了详细分析。 宁波地区主要发育NNE向、 NE向和NW向三组活动构造。 其中NNE向育王山山前断裂, 在TM、 MSS和SPOT影像上都表现出清晰的断层形迹, 切过三处冲积洪积扇, 晚更新世有活动。 走向20°的老鹰山与走向55°的清凉山截然相接显示的线性影像反映出NE向算山-曹隘断裂的形迹, 断裂向宁波盆地延伸, 为宁波盆地规模最大的隐伏断裂。 多时相MSS影像上, 显示出NW向新乐—宝幢和宁波—莫枝活动断层的形迹, 它是深部构造活动在地表的反映, 与走向45°的算山—曹隘断裂, 可能是一组地壳破裂网络。     

Research on Micro-relief of Active Faults on the Coast of Southeast Fujian and Its Adjacent Area

On the southeast coast of Fujian and its adjacent area, the NE-trending Changle-Zhao′an fault zone and several NW-trending faults that are genetically related to the former are well developed. With micro-relief analysis, the paper deals with the Quaternary activity of the faults and the tectonic stress field since the late Pleistocene in this region. The results indicate that the micro-relief of the NE-trending Changle-Zhao′an fault zone and the genetically related NW-trending faults is characterized by vertical and horizontal movements since the Quaternary; the faults in the region have undergone two active stages since the Quaternary, i.e. early Quaternary and late Pleistocene; since the late Pleistocene, the movement of the NE-trending faults showed a right-lateral strike-slip, while that of NW-trending faults a left-lateral strike-slip, indicating a NWW-SEE oriented horizontal principal stress of the regional tectonic stress field     

滇西南地区孟连断裂晚第四纪新活动特征初步研究

孟连断裂位于云南省西南部与缅甸交界地带,是川滇菱形块体南部一条规模较大的活动断裂带,总体呈NEE向延伸,长约90km,走向N70°E,倾向NW,倾角50°~60°,断裂晚第四纪活动较强烈,以左旋走滑为主,兼具有倾滑特征。通过卫星影像解译和野外调查发现,其断错地貌主要以线性断层崖为主,高度不等,其次为断层谷地、断层沟槽和断层垭口地貌,冲沟及阶地的水平位移多在几十米至几百米之间。在孟连县城西侧开挖的大型探槽中,揭露出多条断层,通过分析剖面和14C测年结果认为,孟连断裂晚第四纪发生过4次古地震事件,除最早一次年代较久远以外,其他3次均发生在全新世中晚期以来,最近一次古地震事件的年代为(1 860±30)~(1 090±30)a B.P.。     

福建东南沿海及邻区活动断裂的微地貌研究

本文对福建东南沿海及邻区活动断裂进行了微地貌学分析,研究了区内断裂构造第四纪以来的活动特征,并探讨了晚更新世以来的区域构造应力场.结果表明：北东向的长乐—诏安断裂带和与之具有成生联系的北西向断裂,第四纪以来具有垂直运动和水平运动的特征;主要有两个明显的活动期,即早、中更新世和晚更新世;晚更新世以来,北东向断裂具右旋水平滑动,北西向断裂具左旋水平滑动,显示出北西西—南东东向水平挤的区域构造应力场.     

2018年5月松原MS5.7地震序列发震断层及应力场特征

利用双差定位方法对2018年松原M_S5.7地震序列中M_L≥1.0地震重新定位,之后使用CAP方法求解松原M_S5.7地震序列中强地震的震源机制解,再借助MSATSI软件包反演得到松原地区的区域应力场。综合分析以上研究结果得到如下结论:① 松原M_S5.7地震序列发生在NW走向的第二松花江断裂与NE走向的扶余—肇东断裂交会处,将地震精定位结果沿两条断层走向作剖面分析,NW向剖面主轴长度约为5 km,震中分布均匀,NE向剖面主轴长度亦约为5 km,震中呈倾向NE的高倾角分布;② 该序列中的4次M_L≥3.7地震的震源机制解具有良好的一致性:节面Ⅰ走向为NE向,节面Ⅱ走向为NW向,均为高倾角走滑断层。中强地震的震源机制节面解与第二松花江断裂性质基本一致,由此推断第二松花江断裂是本次松原地震的发震断层;③ 松原地区的主压应力方位角为N86°E,倾角为7°,主张应力方位角为N24°E,倾角为71°。松原地区的区域应力场既受到大尺度的板块构造运动的控制,又受到区域构造运动的影响。在太平洋板块对北东亚板块向西俯冲作用下,东北地区产生了近EW向的主压应力,受周边地质构造控制,松辽盆地内NE向断裂与NW向断裂交会处易发生走滑型地震,2018年松原M_S5.7地震正是在这种构造作用控制下发生的中强地震。      

香港地区活动断裂的初步探讨

香港地区的断裂构造颇为发育,主要有北东、北东东和北西向三组断裂。在现今构造应力场作用之下,北东东和北西向断裂组成共轭断裂系统。由于本地区地震活动水平不高,尚难确定哪组断裂与地震活动密切相关。断层泥的热释光资料表明,断裂的最新活动应在晚更新世,断裂的复发周期应在１０万年左右。目前尚不能肯定哪条断裂为活动断裂。     

Structural analysis and interpretation of the surface deformation associated with the Ning’er,Yunnan Province,China <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>6.4 earthquake of June 3, 2007

The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province M_S6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, landslide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mechanism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er M_S6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of M_S≥2 is 330°, and the focal depths are within the range of 3～12 km, predominantly within 3～10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic framework might be the main cause of the frequent occurrence of M_S6.0～6.9 earthquakes in the area.     

InSAR数据约束的2021年5月21日云南漾濞MS6.4地震发震构造研究

运用Sentinel-1A卫星数据和D-InSAR技术,获取2021-05-21云南漾濞M_S6.4地震的同震形变场。结果显示,漾濞地震同震形变场长轴近NW展布升降轨形变场符号相反,视线向最大沉降量和抬升量为0.1 m。InSAR同震形变场反演的滑动分布主要集中在沿走向2～12 km,倾向1～9 km的范围内,最大滑动量0.35 m,发震断层长9.8 km、宽4 km,滑动量主要集中在地下3～6 km范围内,滑动角-146.7°。同震位移场及滑动分布模型反映本次地震为发震断层的右旋走滑事件,地震破裂未达到地表。断层模型反演结果显示,矩震级为M_W6.1,发震断层以北西走向右旋走滑运动为主,初步认为本次M_W6.1地震发震断裂可能是一条NW向的维西—乔后断裂西侧的隐伏次生断裂。     

The tectonic settings and seismogenic tectonics of the <Emphasis Type="Italic">M</Emphasis>5.7 Jiujiang earthquake in 2005, Jiangxi Province,China

The M5.7 Jiujiang earthquake in 2005 was a mid-strong one, stronger than expected to occur in the region. This paper discusses the neo-tectonic settings of this earthquake, and it is thought that the earthquake region is located in the transitional belt, a potential area inducing weak to moderately strong earthquakes, between two large different tectonic units. The results of the reconnaissance work and on-the-spot investigation after earthquake indicate that the occurrence of the M5.7 Jiujiang earthquake is closely related with the NE-trending fault on the western margin of Ruichang Basin. From its controlling to the landforms and Quaternary depositions, geological profiles, ESR dating, etc., the activity of the Dingjiashan-Langjunshan fault bounding the basin is discussed. It suggests that this fault displays an active one in Middle Pleistocene by the outcrop. Based on the activity of the fault, and the direction and location of the ground fissures, the isoseismal lines and the nodal plane of the focal mechanism solution, it is inferred that the Dingjiashan-Langjunshan fault is the seismogenic tectonics of the M5.7 Jiujiang earthquake, and the intersection point between this fault and the active NW ones is the possible origin of location of this earthquake. Our study shows that this earthquake is not an event exceeding expectation, and that the active and invisible characteristics of the causative fault are typical in the eastern area of China. Supported by the National Development and Reform Commission (Grant No. 20041138) and the National Natural Science Foundation of China (Grant No. 40602019)     

Late Quaternary Activity of the Chuxiong-Nanhua Fault and the 1680 Chuxiong MS6 ¾ Earthquake

In this paper, according to the results of the satellite imagery interpretation and field investigation, we study the active features and the latest active times of the Chuxiong-Nanhua fault, the Quaternary basins formation mechanism, and the relationship between the fault and the 1680 Chuxiong M_S6 ¾ earthquake. Several Quaternary profiles at Lvhe, Nanhua reveal that the fault has offset the late Pleistocene deposits of the T2 and T3 terraces of Longchuan river, indicating that the fault was obviously active in late Quaternary. The Chuxiong-Nanhua fault has been dominated by dextral strike slip motion in the late Quaternary, with an average rate of 1.6-2.0mm/a. Several pull apart Quaternary basins of Chuxiong, Nanhua, and Ziwu etc. have developed along the fault. The 1680 Chuxiong M_S6 ¾ earthquake and several moderate earthquakes have occurred near the fault. The Chuxiong-Nanhua fault are the seismogenic structure of those earthquakes, the latest fault movement was in the late-Pleistocene, and even the Holocene. In large area, the Chuxiong-Nanhua fault and the eastern Qujiang fault and the Shiping fault composed a set of NW-trending oblique orientation active faults, and the motion characteristics are all mainly dextral strike slip. The motion characteristics, like the red river fault of the Sichuan-Yunnan Rhombic Block southwestern boundary, are concerned with the escaping movement of the Sichuan-Yunnan Rhombic Block.     

北京地区地壳精细结构的深地震反射剖面探测研究

长度100 km、NW向穿过三河—平谷8.0级地震区和北京地区主要断裂构造的深地震反射剖面,揭示了该区地壳精细结构图像和断裂的深浅构造特征.结果表明,该区地壳以TWT6～7 s左右的强反射带为界分为上地壳和下地壳,上地壳厚约18～21 km,下地壳厚约13～15 km.剖面TWT3～4 s以上,反射层位丰富,构造形态清晰,且在剖面上具有明显不同的构造特征;在三河—平谷地震区以西,剖面揭示了2～3组反射能量较强的反射震相和一系列错断基底面的断裂,在三河—平谷地震区以东,为一套自东向西倾伏的密集强反射层,这套反射具有典型的沉积盆地特征,盆地最深处约为8～9 km.剖面揭示的地壳深断裂倾角陡直,该断裂切割、扰动了下地壳物质和壳幔过渡带,向上延伸至上地壳,将地壳深部构造与浅部断裂联系在一起,构成了该区最主要的深浅构造特征.