投影寻踪评价模型在隧道围岩稳定性分级中的应用

隧道围岩稳定性分级对隧道工程设计和施工具有重要的意义。利用影响隧道围岩稳定性的多种因素,应用投影寻踪评价模型建立隧道围岩稳定性分级方法,探讨了利用不便于量化为投影指标的影响因素对投影分级结果进行修正的方法。应用实例表明,投影寻踪分级结果与其它分级方法的结果相符,证实了方法的正确性。     

某大型地下洞室群围岩稳定性分类研究

根据地下洞室群的特点 ,选取岩体质量综合级别、块体状况、开挖位移及破坏区、岩爆烈度四因素为分类指标 ,建立了大型地下洞室群围岩稳定性分类体系。针对不同稳定性等级 ,提供了相应的开挖方式和支护处理建议。最后 ,运用该分类体系对某地下洞室群的主厂房进行了分析评价。     

基于灰色系统理论的改进SMR法初探

综合灰色系统理论与传统的边坡岩体质量分级方法(SMR法),提出改进SMR法。传统的岩体质量分级方法中定量指标取值离散性很大,造成质量分级结果阶梯变化。灰色系统理论的灰度特征对解决这类小样本、离散性的问题有很好的适用性。首先对传统质量分级方法的评价指标进行灰类划分,确定各指标所占权重,再构建评价指标的三角白化权函数,并基于最大隶属度准则对边坡岩体进行质量分级。最后结合工程边坡实例,与一般工程RMR(岩体质量分级)与SMR法比较,改进SMR法的评价结果更加吻合工程现状,且质量分级稳定性高,表明其应用于边坡岩体质量分级是科学和准确的。     

基于投影寻踪插值模型的围岩稳定性分类研究

由于受到多种因素的综合作用,因此对围岩稳定性进行准确分类是一个难题。选取影响围岩分类的5个主要因素,根据分类标准,采用在每级标准中随机内插的方法,得到50个标准样本,用于构建分类模型。针对上述复杂优化模型,采用遗传算法进行优化,以获得的最佳投影方向为基础,得到围岩稳定性分类的投影寻踪插值模型。实例分析表明：该模型的分类结果是准确和可靠的,与采用其他几种分类方法所得结论一致。此外,该模型可以得出每个样本的具体得分值,即使对属于同一级的样本也可以排出它们的优劣顺序,因而具有较高的分类精度,是一种更具有应用前景的新方法。     

A new approach for application of rock mass classification on rock slope stability assessment

The objective of this paper is to present a new rock mass classification system which can be appropriate for rock slope stability assessment. In this paper an evaluation model based on combining the Analytic Hierarchy Process (AHP) and the Fuzzy Delphi method (FDM) was presented for assessing slope rock mass quality estimates. This research treats the slope rock mass classification as a group decision problem, and applies the fuzzy logic theory as the criterion to calculate the weighting factors. In addition, several rock slopes of the Southern Cross-Island Highway in Taiwan were selected as the case study examples. After determining the slope rock mass quality estimates for each cases, the Linear Discriminant Analysis (LDA) model was used to classify those that are stable or not, and the discriminant functions which can determine failure probability of rock slopes were carried out by the LDA procedure. Afterward, the results may be compared with slope unstable hazards occurring actually, and then the relation and difference between them were discussed. Results show that the proposed method can be used to assess the stability of rock slopes according to the rock mass classification procedure and the failure probability in the early stage.     

E.Hoek法在节理化岩体力学参数评价中的应用--以长江三峡库区白衣庵滑坡为例

节理化岩体力学参数是岩体工程稳定性评价的难点与关键,而E.Hoek法正是针对节理化岩体破坏特点而提出的一种用于解决这一问题的岩体力学参数评价法。系统地介绍了E.Hoek岩体力学参数评价法的原理,讨论了其操作的关键问题,并以长江三峡白衣庵滑坡节理化岩体为例,详细阐述了E.Hoek法在岩体参数评价中的应用。实例表明,该方法可较准确反映节理化岩体的力学特性,且简单、易行,值得在同类工程中推荐。     

围岩稳定性评价的投影寻踪权重-属性区间识别模型

围岩的稳定性评价是一个复杂的不确定系统问题。采用粒子群算法优化投影寻踪方法,并结合属性区间识别理论,建立了围岩稳定性评价的投影寻踪权重-属性区间识别模型。选取5个围岩稳定性影响因子作为评价指标,通过构造属性测度区间函数计算单指标属性测度区间,利用基于粒子群优化的投影寻踪确定各评价指标的权重以计算综合属性测度区间,应用置信度准则和评分准则对围岩的稳定性进行属性识别。实例研究表明,该模型能有效的解决围岩稳定性评价问题,且评价结果科学可靠;评价模型采用投影寻踪确定权重,避免了权重确定中的主观性和随意性,保证了评价工作的客观性和准确性。     

岩体结构特性及其对岩体稳定的影响

社会主义革命和建设的飞速发展,推动了新中国工程地质科学的前进。大量的工程实践证明,岩体在工程作用下的变形、破坏、受其内在结构的控制。     

岩体稳定性评价的模糊概率方法

岩体稳定性受多种不确定性因素的影响,不仅具有随机性,也具有模糊性,属于模糊概率的范畴,利用经典的模糊综合评判方法进行研究将会导致不合理的结果。在模糊概率理论的基础上,建立了一类新的岩体稳定性综合评价方法——模糊概率方法,并提出了模糊权重的概念,从而避免了权重取值带来的不确定性。结合所选取的5个影响岩体稳定性的因素,建立了这5个影响因素的隶属函数与模糊权重;利用该方法对某一地下岩体工程进行分析,并与其他方法评价的结果进行比较,表明了其方法的合理性与可靠性。     

基于复杂结构精细描述的岩质高边坡稳定性分析

用数值方法对岩质高边坡进行稳定性分析时,描述岩体结构对的精细程度会影响分析结果,但常见的有限单元法程序仍难以对复杂节理岩体进行精细建模。为解决这一问题,将结构面网络模拟与离散单元法相结合,在UDEC软件中,利用FISH语言编写网络模拟程序,依据结构面统计资料和结构面分级,实现对复杂岩体结构的精细描述。以某大型水电工程边坡为例,在对岩体结构进行精细描述的基础上,采用离散元强度折减法对边坡进行稳定性分析。通过与极限平衡法和一般离散元结果的对比,表明基于复杂岩体结构精细描述确定的边坡潜在滑动面和安全系数是合理的,为复杂岩质边坡破坏模式和稳定性的分析提供了新的途径。     

基于模糊概率方法的岩体稳定性评价

岩体稳定性受多种不确定性因素的影响,不仅具有随机性,而且也具有模糊性,属于模糊概率的范畴,利用经典的模糊综合评判方法进行研究将会产生不合理的结果.在模糊概率理论的基础上,建立了一类新的岩体稳定性综合评价方法--模糊概率方法,并提出了模糊权重的概念,从而避免了权重取值带来的不确定性.结合所选取的5个影响岩体稳定性的因素,建立了这5个影响因素的隶属函数与模糊权重;利用此方法对某一地下岩体工程进行了分析,并与其他方法所评价的结果进行了比较,表明了该方法具有合理性与可靠性.     

危岩稳定性计算新体系

地质灾害防治研究中,危岩的研究相对较为薄弱,稳定性计算模型体系不够完善。本文在五个常用计算模型的基础上,增加了后缘有贯通陡倾裂隙的滑移式、双结构面滑移式、后缘无陡倾裂隙且形似悬臂梁的坠落式、上缘岩体抗拉强度控制的坠落式四个新的计算模型,形成了危岩稳定性计算模型新体系。依托工程实例对后缘有贯通陡倾裂隙的滑移式危岩新计算模型的稳定性进行运用验证,即:基于刚体力学的极限平衡法计算求出不同工况下危岩单体的稳定性系数,再基于FLAC3D运用摩尔-库伦模型对该危岩单体进行数值模拟,计算求出其在两种不同工况的稳定系数,两种方法相互印证其可靠性。     

The Dynamic Evaluation of Rock Slope Stability Considering the Effects of Microseismic Damage

A state-of-the-art microseismic monitoring system has been implemented at the left bank slope of the Jinping first stage hydropower station since June 2009. The main objectives are to ensure slope safety under continuous excavation at the left slope, and, very recently, the safety of the concrete arch dam. The safety of the excavated slope is investigated through the development of fast and accurate real-time event location techniques aimed at assessing the evolution and migration of the seismic activity, as well as through the development of prediction capabilities for rock slope instability. Myriads of seismic events at the slope have been recorded by the microseismic monitoring system. Regions of damaged rock mass have been identified and delineated on the basis of the tempo-spatial distribution analysis of microseismic activity during the periods of excavation and consolidation grouting. However, how to effectively utilize the abundant microseismic data in order to quantify the stability of the slope remains a challenge. In this paper, a rock mass damage evolutional model based on microseismic data is proposed, combined with a 3D finite element method (FEM) model for feedback analysis of the left bank slope stability. The model elements with microseismic damage are interrogated and the deteriorated mechanical parameters determined accordingly. The relationship between microseismic activities induced by rock mass damage during slope instability, strength degradation, and dynamic instability of the slope are explored, and the slope stability is quantitatively evaluated. The results indicate that a constitutive relation considering microseismic damage is concordant with the simulation results and the influence of rock mass damage can be allowed for its feedback analysis of 3D slope stability. In addition, the safety coefficient of the rock slope considering microseismic damage is reduced by a value of 0.11, in comparison to the virgin rock slope model. Our results demonstrate that microseismic activity induced by construction disturbance only slightly affects the stability of the slope. The proposed feedback analysis technique provides a novel method for dynamically assessing rock slope stability and can be used to assess the slope stability of other similar rock slopes.     

基于PSO-PP的围岩稳定性评价

围岩的稳定性评价是一个复杂的不确定系统问题。结合投影寻踪方法、粒子群算法和逻辑斯谛曲线函数,建立了围岩稳定性评价的粒子群优化投影寻踪(projection pursuit based on particle swarm optimization,PSO-PP)模型。该模型一方面采用粒子群算法优化投影指标函数及逻辑斯谛曲线函数参数,确保了模型的准确性;另一方面利用逻辑斯谛曲线函数建立投影值与经验等级之间的非线性关系。模型的测试结果显示了良好的精度,实例分析结果与实际状态完全一致,表明该模型在围岩稳定性评价中的可行性和有效性。     

危岩主控结构面变形破坏的扩展有限元法模拟分析

危岩是三峡库区典型的地质灾害类型之一,主要分为坠落式危岩和倾倒式危岩两种失稳形式,危岩主控结构面受荷断裂扩展是其发育成灾的关键核心。将危岩主控结构面类比为宏观裂纹,运用扩展有限元方法（XFEM）,求解结构面扩展过程的移动非连续问题,探索在荷载作用下危岩主控结构面的断裂扩展行为,以重庆万州太白岩危岩为例,考虑岩石的抗拉强度、主控结构面的几何位置与倾角对危岩的变形破坏模式与稳定性的影响。结果表明,随着岩石抗拉强度的降低,危岩的稳定性程度降低;随着主控结构面倾角的减小,危岩的稳定性程度提高,同时结构面开裂路径也明显改变;危岩体两种失稳模式的破坏机制都为拉剪机制,相对于倾倒式危岩,同等条件下坠落式危岩的稳定性更差。     

3D key‐group method for slope stability analysis

Because of the simplicity and the speed of execution, methods used in static stability analyses have yet remained relevant. The key‐block method, which is the most famous of them, is used for the stability analysis of fractured rock masses. The KBM method is just based on finding key blocks, and if no such blocks are found to be unstable, it is concluded that the whole of the rock mass is stable. Literally, though groups of ‘stable’ blocks are taken together into account, in some cases, it may prove to be unstable. An iterative and progressive stability analysis of the discontinuous rock slopes can be performed using the key‐group method, in which groups of collapsible blocks are combined. This method is literally a two‐dimensional (2D) limit equilibrium approach. Because of the normally conservational results of 2D analysis, a three‐dimensional (3D) analysis seems to be necessary. In this paper, the 2D key‐group method is developed into three dimensions so that a more literal analysis of a fractured rock mass can be performed. Using Mathematica software, a computer program was prepared to implement the proposed methodology on a real case. Then, in order to assess the proposed 3D procedure, its implementation results are compared with the outcomes of the 2D key‐group method. Finally, tectonic block No.2 of Choghart open pit mine was investigated as a case study using the proposed 3D methodology. Results of the comparison revealed that the outcomes of the 3D analysis of this block conform to the reality and the results of 2D analysis. Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of rock mass disturbance on the stability of rock slopes using the Hoek–Brown failure criterion

The process of creating man made or “cut” slopes in rock invariably leads to stress relief within the rock mass which in turn induces a certain degree of fracturing and disturbance. The level of disturbance can be particularly significant when the slope is formed using blasting techniques. However, the effects of this disturbance on the overall rock slope stability have not been investigated thoroughly in the current literature. In order to account for rock mass disturbance during construction, a disturbance factor has been included in the Hoek–Brown failure criterion [1]. This paper uses finite element upper and lower bound limit analyses to estimate rock slope stability based on the Hoek–Brown failure criterion whilst including the effect of rock mass disturbance. A rigorous set of analyses have been performed where the level of disturbance is considered as constant or linearly varying throughout the slope. The results are then compared to a number of reported case histories for verification purposes. From the results of this study, the disturbance factor was found to have significant influence on the rock slope stability assessment, especially for poorer quality rock masses. Hence, cautious engineering judgement must be exercised when estimating the level of disturbance. In addition, utilising stability charts to estimate the stability of cut rock slopes without considering the rock mass disturbance may lead to significant overestimations.     

基于裂隙岩样的多组贯穿裂隙岩体峰后应力-应变曲线研究

在岩土工程中,裂隙岩体经常处于峰后变形状态,研究裂隙岩体的峰后应力-应变关系对预测结构的稳定性有重要意义。基于峰后软化阶段强度参数的逐渐演化行为,首先提出一个求岩石峰后应力-应变关系和裂隙峰后应力-切向位移关系的一般方法。然后采用摩尔-库仑强度准则,以岩石的最大主应变和裂隙的切向位移作为软化参数,假设强度参数为软化参数的分段线性函数,分岩体沿裂隙滑移破坏和沿岩石剪切破坏两种情况,提出多组贯穿裂隙岩体峰后应力-应变关系式的求法。最后,在算例中,分岩体沿裂隙滑移破坏和沿岩石剪切破坏两种情况给出了裂隙岩体的峰后应力-应变曲线,讨论了裂隙的平均间距、法向刚度和剪切刚度对峰后应变的影响。结果表明,裂隙的平均间距、法向刚度和剪切刚度越小,裂隙岩体的轴向应变越大。     

Terrestrial Photogrammetry and Numerical Modelling for the Stability Analysis of Rock Slopes in High Mountain Areas: Aiguilles Marbrées case

Several high-altitude slope instability phenomena, involving rock blocks of different volumes, have been observed in recent years. The increase in these phenomena could be correlated to climatic variations and to a general increase in temperature that has induced both ice melting with consequent water seepage and glacial lowering, with a consequent loss of support of the rock face. The degradation of the high-altitude thermal layer, which is known as “permafrost”, can determine the formation of highly fractured rock slopes where instabilities can concentrate. The present research has developed a methodology to improve the understanding and assessment of rock slope stability conditions in high mountain environments where access is difficult. The observed instabilities are controlled by the presence of discontinuities that can determine block detachments. Consequently, a detailed survey of the rock faces is necessary, both in terms of topography and geological structure, and in order to locate the discontinuities on the slope to obtain a better geometric reconstruction and subsequent stability analysis of the blocky rock mass. Photogrammetric surveys performed at different times allow the geostructure of the rock mass to be determined and the rock block volumes and detachment mechanisms to be estimated, in order to assess the stability conditions and potential triggering mechanisms. Photogrammetric surveys facilitate both the characterisation of the rock mass and the monitoring of slope instabilities over time. The methodology has been applied in a case study pertaining to the North Face of Aiguilles Marbrées in the Mont Blanc massif, which suffers from frequent instability phenomena. A slope failure that occurred in 2007 has been back-analysed using both the limit equilibrium method (LEM) and 3D distinct element modelling (DEM). The method has been supported and validated with traditional in situ surveys and measurements of the discontinuity orientation and other rock mass features.     

裂隙岩体块体化程度评价方法的若干问题修正

块体化程度是评价岩体完整性的一种新指标,能从三维角度表征岩体破碎程度,但目前该方法仍存在未充分考虑岩体切割程度及块体规模、未限定基础应用条件、块体化程度等级划分不合理等缺陷。针对上述缺陷,深入分析了其产生原因,并借鉴岩体切割程度、三维块度模数、体积RQD等计算原理,限定了块体体积百分比相关概念,提出了考虑岩体完整性块度尺寸效应的块体体积综合百分比计算方法,确立了块体化程度等级及分级指标取值依据,建立了修正的块体化程度评价方法。通过对比块体化程度评价修正方法、岩土工程规范对岩体完整性的划分结果,分析了修正方法的合理性。分别以广西铜坑矿锌多金属矿体、乌东德水电工程的块体研究数据为基础,开展了修正块体化程度评价方法的实例验证,结果表明：利用修正块体化程度评价方法计算的铜坑矿+255 m中段4#试验区岩体块体体积百分比为11.18%,属轻度块状化岩体;乌东德水电站PD49-1平硐、PD4支硐块体体积百分比分别为12.847%、10.168%,均属于轻度块状化岩体,岩体完整性程度为较完整级别。与现有块体化程度评价方法比较,修正方法计算的块体体积百分比能够更准确地从三维角度表征真实岩体的完整性。研究成果对精确刻画岩体三维完整性具有重要意义。