Seismic strain rates and distributed continental deformation in the northern Andes and three-dimensional seismotectonics of northwestern South America

Remote sensing and field studies of several extensional basins along the northern margin of the Gulf of Aden in Yemen show that Oligocene–Miocene syn-rift extension trends N20°E on average, in agreement with the E–W to N120°E strike of main rift-related normal faults, but oblique to the main trend of the Gulf (N70°E). These faults show a systematic reactivation under a 160°E extensional stress that we interpret also as syn-rift. The occurrence of these two successive phases of extension over more than 1000 km along the continental margin suggests a common origin linked to the rifting process. After discussing other possible mechanisms such as a change in plate motion, far-field effects of Arabia–Eurasia collision, and stress rotations in transfer zones, we present a working hypothesis that relates the 160°E extension to the westward propagation since about 20 Ma of the N70°E-trending, obliquely spreading, Gulf of Aden oceanic rift. The late 160°E extension, perpendicular to the direction of rift propagation, could result from crack-induced extension associated with the strain localization that characterises the rift-to-drift transition.     

Rupture progression along discontinuous oblique fault sets: implications for the Karadere rupture segment of the 1999 Izmit earthquake, and future rupture in the Sea of Marmara

Large earthquakes in strike-slip regimes commonly rupture fault segments that are oblique to each other in both strike and dip. This was the case during the 1999 Izmit earthquake, which mainly ruptured E–W-striking right-lateral faults but also ruptured the N60°E-striking Karadere fault at the eastern end of the main rupture. It will also likely be so for any future large fault rupture in the adjacent Sea of Marmara. Our aim here is to characterize the effects of regional stress direction, stress triggering due to rupture, and mechanical slip interaction on the composite rupture process. We examine the failure tendency and slip mechanism on secondary faults that are oblique in strike and dip to a vertical strike-slip fault or “master” fault. For a regional stress field well-oriented for slip on a vertical right-lateral strike-slip fault, we determine that oblique normal faulting is most favored on dipping faults with two different strikes, both of which are oriented clockwise from the strike-slip fault. The orientation closer in strike to the master fault is predicted to slip with right-lateral oblique normal slip, the other one with left-lateral oblique normal slip. The most favored secondary fault orientations depend on the effective coefficient of friction on the faults and the ratio of the vertical stress to the maximum horizontal stress. If the regional stress instead causes left-lateral slip on the vertical master fault, the most favored secondary faults would be oriented counterclockwise from the master fault. For secondary faults striking ±30° oblique to the master fault, right-lateral slip on the master fault brings both these secondary fault orientations closer to the Coulomb condition for shear failure with oblique right-lateral slip. For a secondary fault striking 30° counterclockwise, the predicted stress change and the component of reverse slip both increase for shallower-angle dips of the secondary fault. For a secondary fault striking 30° clockwise, the predicted stress change decreases but the predicted component of normal slip increases for shallower-angle dips of the secondary fault. When both the vertical master fault and the dipping secondary fault are allowed to slip, mechanical interaction produces sharp gradients or discontinuities in slip across their intersection lines. This can effectively constrain rupture to limited portions of larger faults, depending on the locations of fault intersections. Across the fault intersection line, predicted rakes can vary by >40° and the sense of lateral slip can reverse. Application of these results provides a potential explanation for why only a limited portion of the Karadere fault ruptured during the Izmit earthquake. Our results also suggest that the geometries of fault intersection within the Sea of Marmara favor composite rupture of multiple oblique fault segments.     

Sand-box modelling of basement-controlled transfer zones in extensional domains

The interaction modalities of transfer zones connecting rift segments may be influenced by several factors. Amongst these, the location and architecture of transfer zones in narrow rifts has been repeatedly associated with the presence of inherited basement anisotropies. Sand-box models were made to investigate how the orientation, geometry and kinematics of transfer zones depend upon pre-existing basement anisotropies. Analogue models reproduced offset rift segments linked by transfer zones bordered by arcuate normal faults. Strike-slip faults are present inside the transfer zone, provided that angle α (between the extension direction and the axis of the transfer zone) is less than 50°. Narrower transfer zones, striking oblique to the extension direction, occur for angle φ (between the direction perpendicular to the extension direction and the direction of the basement anisotropy) less than 90°; wider transfer zones, subparallel to the extensional direction, occur for φ > 90°. Increasing the overstep induces narrower transfer zones striking subparallel to the extension direction. Similar geometrical and kinematical patterns have been found at transfer zones in narrow rifts. The comparison between experimental and natural data shows how the geometry, kinematics and orientation of natural transfer zones depends upon the trend of inherited anisotropies: transfer zones along inherited basement structures set at lower angles to the extension direction, and display lower aspect ratios, than transfer zones where inherited anisotropies are absent.     

Accretion of oceanic crust under conditions of oblique spreading

The accretion of oceanic crust under conditions of oblique spreading is considered. It is shown that deviation of the normal to the strike of mid-ocean ridge from the extension direction results in the formation of echeloned basins and ranges in the rift valley, which are separated by normal and strike-slip faults oriented at an angle to the axis of the mid-ocean ridge. The orientation of spreading ranges is determined by initial breakup and divergence of plates, whereas the within-rift structural elements are local and shallow-seated; they are formed only in the tectonically mobile rift zone. As a rule, the mid-ocean ridges with oblique spreading are not displaced along transform fracture zones, and stresses are relaxed in accommodation zones without rupture of continuity of within-rift structural elements. The structural elements related to oblique spreading can be formed in both rift and megafault zones. At the initial breakup and divergence of continental or oceanic plates with increased crust thickness, the appearance of an extension component along with shear in megafault zones gives rise to the formation of embryonic accretionary structural elements. As opening and extension increase, oblique spreading zones are formed. Various destructive and accretionary structural elements (nearly parallel extension troughs; basin and range systems oriented obliquely relative to the strike of the fault zone and the extension axis; rhomb-shaped extension basins, etc.) can coexist in different segments of the fault zone and replace one another over time. The Andrew Bain Megafault Zone in the South Atlantic started to develop as a strike-slip fault zone that separated the African and Antarctic plates. Under extension in the oceanic domain, this zone was transformed into a system of strike-slip faults divided by accretionary structures. It is suggested that the De Geer Megafault Zone in the North Atlantic, which separated Greenland and Eurasia at the initial stage of extension that followed strike-slip offset, evolved in the same way.     

Late Cenozoic transpressional ductile deformation north of the Nazca–South America–Antarctica triple junction

The southern Andes plate boundary zone records a protracted history of bulk transpressional deformation during the Cenozoic, which has been causally related to either oblique subduction or ridge collision. However, few structural and chronological studies of regional deformation are available to support one hypothesis or the other. We address along- and across-strike variations in the nature and timing of plate boundary deformation to better understand the Cenozoic tectonics of the southern Andes.Two east–west structural transects were mapped at Puyuhuapi and Aysén, immediately north of the Nazca–South America–Antarctica triple junction. At Puyuhuapi (44°S), north–south striking, high-angle contractional and strike-slip ductile shear zones developed from plutons coexist with moderately dipping dextral-oblique shear zones in the wallrocks. In Aysén (45–46°), top to the southwest, oblique thrusting predominates to the west of the Cenozoic magmatic arc, whereas dextral strike-slip shear zones develop within it.New ⁴⁰Ar–³⁹Ar data from mylonites and undeformed rocks from the two transects suggest that dextral strike-slip, oblique-slip and contractional deformation occurred at nearly the same time but within different structural domains along and across the orogen. Similar ages were obtained on both high strain pelitic schists with dextral strike-slip kinematics (4.4±0.3 Ma, laser on muscovite–biotite aggregates, Aysén transect, 45°S) and on mylonitic plutonic rocks with contractional deformation (3.8±0.2 to 4.2±0.2 Ma, fine-grained, recrystallized biotite, Puyuhuapi transect). Oblique-slip, dextral reverse kinematics of uncertain age is documented at the Canal Costa shear zone (45°S) and at the Queulat shear zone at 44°S. Published dates for the undeformed protholiths suggest both shear zones are likely Late Miocene or Pliocene, coeval with contractional and strike-slip shear zones farther north. Coeval strike-slip, oblique-slip and contractional deformation on ductile shear zones of the southern Andes suggest different degrees of along- and across-strike deformation partitioning of bulk transpressional deformation.The long-term dextral transpressional regime appears to be driven by oblique subduction. The short-term deformation is in turn controlled by ridge collision from 6 Ma to present day. This is indicated by most deformation ages and by a southward increase in the contractional component of deformation. Oblique-slip to contractional shear zones at both western and eastern margins of the Miocene belt of the Patagonian batholith define a large-scale pop-up structure by which deeper levels of the crust have been differentially exhumed since the Pliocene at a rate in excess of 1.7 mm/year.     

Curved structures and interference fold patterns associated with lateral ramps in the Eastern Cordillera, Central Andes of Argentina

The conspicuous curved structures located at the eastern front of the Eastern Cordillera between 25° and 26° south latitude is coincident with the salient recognized as the El Crestón arc. Major oblique strike-slip faults associated with these strongly curved structures were interpreted as lateral ramps of an eastward displaced thrust sheet. The displacement along these oblique lateral ramps generated the local N–S stress components responsible for the complex hanging wall deformation. Accompanying each lateral ramp, there are two belts of strong oblique fault and folding: the upper Juramento River valley area and El Brete area.On both margins of the Juramento River upper valley, there is extensive map-scale evidence of complex deformation above an oblique ramp. The N–S striking folds originated during Pliocene Andean orogeny were subsequently or simultaneously folded by E–W oriented folds. The lateral ramps delimiting the thrust sheet coincident with the El Crestón arc salient are strike-slip faults emplaced in the abrupt transitions between thick strata forming the salient and thin strata outside of it. El Crestón arc is a salient related to the pre-deformational Cretaceous rift geometry, which developed over a portion of this basin (Metán depocenter) that was initially thicker. The displacement along the northern lateral ramp is sinistral, whereas it is dextral in the southern ramp. The southern end of the Eastern Cordillera of Argentina shows a particular structure reflecting a pronounced along strike variations related to the pre-deformational sedimentary thickness of the Cretaceous basin.     

Strike-slip faults parallel to crustal spreading axes: data from Iceland and the Afar Depression

Slickenside studies in regions of crustal spreading such as Iceland and the Afar Depression, East Africa, reveal that a significant number of faults parallel and close to rift axes are strike-slip rather than normal. Therefore, the pattern of brittle deformation in these regions does not conform to the classic two-dimensional schemes of oceanic tectonics and pre-oceanic rifting. Dip-slip and strike-slip faulting presumably alternated along or in the vicinity of spreading axes, indicate a varying stress field and a combination of transverse and longitudinal movements. In Iceland, strike-slip faults parallel to rifts are observed both west and east of the rift system as well as in a median area between overlapping rifts; the mechanisms proposed for their origin include accommodation of oblique convergence or divergence of crustal sections due to variations of spreading directions along axis and the interaction of overlapping rifts. In the Afar Depression this kind of fault is recorded west of the rift of Asal and can be imputed to reflect an interaction among rifts in the vicinity of the Afar triple junction. Rift-parallel strike-slip faults cannot however be assumed to be a feature of all crustal spreading axes due to the peculiarity of the examined regions: both of them are hot-spot areas and the Afar Depression lies at a triple junction.     

Centrifuge modelling of the influence of crustal fabrics on the development of transfer zones: insights into the mechanics of continental rifting architecture

Centrifuge analogue experiments are used to model the reactivation of pre-existing crustal fabrics during extension. The models reproduced a weakness zone in the lower crust whose geometry was varied in order to investigate its role in controlling the architecture of rift segments and related transfer zones. The typical rift system geometry was characterised by two offset rift segments connected by a major transfer zone in which boundary faults were oblique to the extension vector and displayed a significant transcurrent component of movement. The transfer zone was also characterised by cross-basin faults with both trend and strike-slip component of movement opposite to that displayed by the master faults. Typically, different structural patterns were obtained by changing the offset angle φ between the rift segments, supporting that the structural pattern at transfer zones is strongly influenced by the orientation of pre-existing discontinuities with respect to the stretching vector. In the models, the aspect ratio (ratio of length vs. width) of the transfer zone shows a positive correlation with the offset angle (i.e., the more the inherited fabric is parallel to the extension direction, the longer and narrower the transfer zones). In case of staircase offset of the rift segments (φ=90°), the structural pattern was characterised by two isolated rift depressions linked by a narrow transfer zone in which border faults with alternating polarity overlapped. Prominent rise of the ductile lower crust was also observed at the transfer zone. Many of these geometrical features display striking similarities with natural rift systems. The results of the current experiments provide useful insights into the mechanics of continental rift architecture, supporting that rift propagation, width and along-axis segmentation may be strongly controlled by the reactivation of pre-existing pervasive crustal fabrics.     

Convergence structures of the Peru trench between 10°S and 14°S

High resolution seafloor studies of the Peru Trench between 10°S and 14°S with the GLORIA long-range side-scan sonar system show that the Nazca plate is broken by numerous normal faults as it bends into the trench. These bending-induced faults strike subparallel to the trench axis and overprint and cut across spreading fabric structures of the plate. They commonly form grabens having widths and spacings of 3–5 km and extend for as much as 100 km along strike. Vertical displacements are generally 200 m or more by the time they reach the trench axis. Turbidite deposits are found in the trench north of 11.5°S. Both turbidite and pelagic sediments are folded and temporarily accreted to the base of the overriding plate along the length of the trench axis. They are apparently subsequently implaced in the grabens by slumping and subducted with the Nazca plate. The Mendaña Fracture Zone, which intersects the trench between 9°40′S and 10°35′S, appears to be the locus of a seaward propagating rift that is forming in response to subduction-induced extensional stresses in the Nazca plate.     

The oblique intersection of the Mid-Atlantic Ridge with Charlie-Gibbs transform fault

The junction angle between the western Charlie-Gibbs transform fault and the spreading axis of the Mid-Atlantic Ridge diverges by 40° from the orthogonal intersection assumed in many studies of plate boundaries. This has been established by a surface-ship reconnaissance and by mapping fault trends in a transponder-navigated deep-tow survey of the fracture valley 25 km from the intersection. One set of normal faults trends 325–330°, parallel to the obliquely spreading ridge axis, and another set trends 275°, parellel to the direction of relative plate motion. Although the near-bottom survey was in the theoretically inactive part of the fracture zone, beyond the transform fault section, there is evidence for recent motion on faults that cut the thick sediment fill of the fracture valley.Oblique spreading of a ridge axis near a transform fault may result from distortion of the regional stress field by a strike-slip couple. Tension parallel to the long axis of the strike-slip strain ellipse, which is responsible for oblique normal faulting in transform valleys, causes oblique dike injection and oblique faulting in the axial rift valley. These effects extend further from transfrom fault intersections on slow-spreading ridges than on fast-spreading rises.     

Isla San Pedro Nolasco as a Late Miocene intrusive record at the eastern margin of the Gulf of California: Insights from geological,geochemical and geochronological studies

Isla San Pedro Nolasco (ISPN) is a structural high bounded by inactive dextral oblique-slip faults in the east-central part of the Gulf of California rift zone and is composed of intrusive rocks not exposed on other Gulf of California islands. Here we present the reconnaissance results from geological mapping, as well as first geochemical and geochronological data for the ISPN intrusive complex. The intrusive rocks compose a sheet-like body of intermediate and felsic composition intruded by an intermediate and acidic dike swarm. All intrusive rocks (host and dikes) range in age from ca. 9 Ma to 10 Ma (⁴⁰Ar/³⁹Ar) and show a hydrous ferromagnesian mineral association (amphibole and biotite) with a calc-alkalic and transitional affinity. This hydrated mineralogical association has not been recognized in the coeval rocks along the onshore western margin of the North American plate (coastal Sonora). However, such hydrous mineralogical association is found in the coeval rift transitional volcanic rocks from the Baja California Microplate at Santa Rosalía and Bahía de Los Ángeles – Bahía de Las Ánimas. The ISPN continental block, at least 40 km long, has been pulled apart by transtensional faulting of the late Miocene Gulf of California shear zone before the westward migration of the North America-Pacific plate boundary at ca. 3–2 Ma. Eventually, ISPN became isolated as an island during the late Miocene flooding of the Gulf of California seaway.     

Review of the tectonics of the Levant Rift system: the structural significance of oblique continental breakup

The Levant Rift system is an elongated series of structural basins that extends for more than 1000 km from the northern Red Sea to southern Anatolia. The system consists of three major segments, the Jordan Rift in the south, El Gharb–Kara-Su Rift in the north, and the Lebanese Fault splay in between. The rifted parts of this structural system are accompanied by intensively uplifted margins that mirror-image the basinal pattern, namely, the deeper the basin—the higher its margins, and vice versa. Uplifts also occur along the fault splay section. The Jordan Rift comprises axial basins that diminish in size from the south northwards, and are separated from each other by shallow threshold zones along the axis of the rift, where the margins are also subdued. The Lebanese Fault splay consists of five faults that emerge from the northern edge of the Jordan Rift and trend like a fan between the north and the northeast. One of these faults connects the Jordan and El Gharb–Kara-Su rifts. The Levant Rift and its uplifted margins started to develop in the middle-late Miocene, and most of the structural development occurred in the Plio-Pleistocene.The Levant Rift system is characterized by its oblique displacement, and evidence for both dip-slip and strike-slip displacement was measured on its faults. Earthquakes also indicate that same mixed pattern, some of them show strike-slip offset, and others normal. It is generally conceded that the amount of normal offset along the boundary faults of the Rift system reaches 8–10 km, but the lateral displacement is disputed, and offsets ranging from 11 to 107 km were suggested. Assessment of the available data led us to suggest that the sinistral offset along the Levant Rift system is approximately 10–20 km. The similarity between the vertical and the lateral displacements, the basin and threshold structural pattern of the Rift, model experiments in oblique rifting, as well as the significant tectonic resemblance to the Red Sea and the East African rifts, indicate that the Levant Rift is the product of continental breakup, and it is probably an emerging oceanic spreading center.     

Late Pliocene to Early Quaternary extensional detachment in the La Paz–El Cabo area (Baja California Sur, Mexico): implications on the opening of the Gulf of California and the mechanics of oblique rifting

We demonstrate that Pliocene to Early Quaternary sedimentary formations in Baja California Sur (Mexico) were deposited syn-tectonically over a major detachment associated with the exhumation of Mesozoic crust. The detachment dips to the ENE and is associated with E–W stretching. This large extensional structure strikes almost parallel to the general trend of the Gulf of California and extension is oblique to the East-Pacific seafloor-spreading direction. Crustal-scale stretching in this area was still active after the beginning of seafloor spreading c.  3.6 Ma ago. The detachment is capped by Late Pleistocene–Holocene alluvial sediments the deposition of which seems to be partly syn-tectonic and controlled by minor stretching subparallel to the present-day North American–Pacific kinematic vector. We discuss the implications of our observations on strain partitioning during opening of the California Gulf as well as on the structure of the Gulf of California margin.     

Reflection–refraction seismics in the Gulf of Corinth: hints at deep structure and control of the deep marine basin

The Gulf of Corinth is a natural laboratory for the study of seismicity and crustal deformation during continental extension. Seismic profiling along its axis provides a 24-fold normal-incidence seismic reflection profile and wide-angle reflection–refraction profiles recorded by sea-bottom seismometers (OBS) and land seismometers. At wide-angle incidence, the land receivers document the Moho at 40-km depth under the western end of the Gulf north of Aigion, rising to 32-km depth under the northern coast in the east of the Gulf. Both refraction and normal-incidence reflection sections image the basement under the deep marine basin that has formed by recent extension. The depth to the base of the sedimentary basin beneath the Gulf, constrained by both methods, is no more than 2.7 km, with 1 km of water underlain by no more than 1.7 km of sediment, less than what was expected from past modeling of uplift of the south coast in the East of the Gulf. Unlike the flat sea-bottom, the basement and sedimentary interfaces show topography along this axial line. Several deeps are identified as depocenters, which suggest that this axial line is not a strike line to the basin. It appears instead to be controlled by several faults, oblique to the S60°E overall trend of the south coast of the Gulf, their more easterly strikes being consistent with the instantaneous direction of extension measured by earthquake slip vectors and by GPS.     

Shear structural paragenesis and its role in continental rifting of the East Asian margin

The spatial-genetic relationships between transit fault systems of the East Asian global shear zone (EAGSZ) are analyzed. It is established that the EAGSZ internal structure between the Okhotsk and South China seas is identical to that of world-known natural and experimental shear zones, which confirms its development as an integral structure. The structural-kinematic analysis included the Tan-Lu-Sikhote-Alin (TS) system of left-lateral strike-slip faults (NNE 25°–30°) and the Bohai-Amur (BA) system of updip-strike-slip faults (NE 50°–70°). It is shown that these systems were formed as structural parageneses during two stages. The first and shear-thrust stage (Jurassic-Early Cretaceous) was marked by general NNW-oriented compression with the formation of the TS system of left-lateral strike-slip faults and their structural parageneses (compression structures) such as the BA system of updip-thrusts. The second, strike-slip-pull apart stage (Late Cretaceous-Cenozoic) was characterized by SE-directed tangential compression, which was generated by the SW left-lateral displacement of the continental crust along the Central Sikhote-Alin deep-seated fault. In such dynamic settings, the updip-thrust kinematics of the BA system gave way to that of left-lateral strike-slip faults. The strike-slip faults were formed in the transtension regime (shear with extension), which determined the development of pull-apart structures, where the left-lateral shear extension component played the decisive role. Simultaneously, the extension involved the Tan-Lu strike-slip fault with the formation of the rift valley and the discrete development of sedimentary basins along the latter.     

Structural control of geothermal reservoirs in extensional tectonic settings: An example from the Upper Rhine Graben

In extensional tectonic settings major structural elements such as graben boundary faults are typically oriented subparallel to the maximum horizontal stress component S_Hmax. They are often structurally accompanied by transfer zones that trend subparallel to the extension direction. In the Upper Rhine Graben, such transfer faults are typically characterized by strike-slip or oblique-slip kinematics. A major re-orientation of the regional stress field by up to 90° of the Upper Rhine Graben in the Early Miocene led to the present-day normal and strike-slip faulting regimes in the North and South of the Upper Rhine Graben, respectively, and a transition zone in-between. Consequently, conditions for fault frictional failure changed significantly. Moreover, it has been observed during tracer and stimulation experiments that such transfer faults may be of major importance for the hydraulic field of geothermal reservoirs under the present stress condition, especially, when located between production and injection well.In this context we have investigated slip and dilation tendencies (T_S and T_D) of major structural elements at reservoir scale for two representative geothermal sites, Bruchsal (Germany) and Riehen (Switzerland), located close to the Eastern Main Boundary Fault of the Upper Rhine Graben. We have evaluated the quality and uncertainty range of both tendencies with respect to potential variation in S_Hmax orientation. Despite significant differences in orientation of the structures and the stress regimes, the resulting variation of T_S and T_D reveal major similarities concerning the reactivation potential of both, the graben-parallel structures and the transfer faults. The conditions of criticality for tensile failure and non-criticality for shear failure suggest that transfer faults are most likely naturally permeable structures with low stimulation potential. This is in agreement with the absence of both immediate tracer recovery and seismicity in the studied geothermal sites.     

Comments on the development of rifts and transform faults during continental breakup; examples from the Gulf of Aden and northern Red Sea

A number of basins are observed to extend inland from the coasts on both sides of the Gulf of Aden. The basins are orientated at approximately right angles to the spreading direction and intersect the coasts at the meeting of sheared and rifted continental margins. They appear to be grabens, one wall of which is continuous with the half graben of the neighbouring rifted margin. It is suggested that these were once parts of a number of discrete rifts arranged en-echelon along a zone of lithospheric weakness during the early opening of the Gulf of Aden, which became redundant when transform faults formed. The proposed development of rifts and transform faults is similar to that of a spreading centre, transform fault, spreading centre pattern developed in the freezing wax model of Oldenburg and Brune (1975). The Gulf of Suez at the northern end of the Red Sea is interpreted in a similar way since it has a number of features in common with the basins in the continents adjacent to the Gulf of Aden.     

Continental rift evolution: From rift initiation to incipient break-up in the Main Ethiopian Rift, East Africa

The Main Ethiopian Rift is a key sector of the East African Rift System that connects the Afar depression, at Red Sea–Gulf of Aden junction, with the Turkana depression and Kenya Rift to the South. It is a magmatic rift that records all the different stages of rift evolution from rift initiation to break-up and incipient oceanic spreading: it is thus an ideal place to analyse the evolution of continental extension, the rupture of lithospheric plates and the dynamics by which distributed continental deformation is progressively focused at oceanic spreading centres.The first tectono-magmatic event related to the Tertiary rifting was the eruption of voluminous flood basalts that apparently occurred in a rather short time interval at around 30 Ma; strong plateau uplift, which resulted in the development of the Ethiopian and Somalian plateaus now surrounding the rift valley, has been suggested to have initiated contemporaneously or shortly after the extensive flood-basalt volcanism, although its exact timing remains controversial. Voluminous volcanism and uplift started prior to the main rifting phases, suggesting a mantle plume influence on the Tertiary deformation in East Africa. Different plume hypothesis have been suggested, with recent models indicating the existence of deep superplume originating at the core-mantle boundary beneath southern Africa, rising in a north–northeastward direction toward eastern Africa, and feeding multiple plume stems in the upper mantle. However, the existence of this whole-mantle feature and its possible connection with Tertiary rifting are highly debated.The main rifting phases started diachronously along the MER in the Mio-Pliocene; rift propagation was not a smooth process but rather a process with punctuated episodes of extension and relative quiescence. Rift location was most probably controlled by the reactivation of a lithospheric-scale pre-Cambrian weakness; the orientation of this weakness (roughly NE–SW) and the Late Pliocene (post 3.2 Ma)-recent extensional stress field generated by relative motion between Nubia and Somalia plates (roughly ESE–WNW) suggest that oblique rifting conditions have controlled rift evolution. However, it is still unclear if these kinematical boundary conditions have remained steady since the initial stages of rifting or the kinematics has changed during the Late Pliocene or at the Pliocene–Pleistocene boundary.Analysis of geological–geophysical data suggests that continental rifting in the MER evolved in two different phases. An early (Mio-Pliocene) continental rifting stage was characterised by displacement along large boundary faults, subsidence of rift depression with local development of deep (up to 5 km) asymmetric basins and diffuse magmatic activity. In this initial phase, magmatism encompassed the whole rift, with volcanic activity affecting the rift depression, the major boundary faults and limited portions of the rift shoulders (off-axis volcanism). Progressive extension led to the second (Pleistocene) rifting stage, characterised by a riftward narrowing of the volcano-tectonic activity. In this phase, the main boundary faults were deactivated and extensional deformation was accommodated by dense swarms of faults (Wonji segments) in the thinned rift depression. The progressive thinning of the continental lithosphere under constant, prolonged oblique rifting conditions controlled this migration of deformation, possibly in tandem with the weakening related to magmatic processes and/or a change in rift kinematics. Owing to the oblique rifting conditions, the fault swarms obliquely cut the rift floor and were characterised by a typical right-stepping arrangement. Ascending magmas were focused by the Wonji segments, with eruption of magmas at surface preferentially occurring along the oblique faults. As soon as the volcano-tectonic activity was localised within Wonji segments, a strong feedback between deformation and magmatism developed: the thinned lithosphere was strongly modified by the extensive magma intrusion and extension was facilitated and accommodated by a combination of magmatic intrusion, dyking and faulting. In these conditions, focused melt intrusion allows the rupture of the thick continental lithosphere and the magmatic segments act as incipient slow-spreading mid-ocean spreading centres sandwiched by continental lithosphere.Overall the above-described evolution of the MER (at least in its northernmost sector) documents a transition from fault-dominated rift morphology in the early stages of extension toward magma-assisted rifting during the final stages of continental break-up. A strong increase in coupling between deformation and magmatism with extension is documented, with magma intrusion and dyking playing a larger role than faulting in strain accommodation as rifting progresses to seafloor spreading.     

Tectonics of the Afar Depression: A review and synthesis

This article outlines geomorphological and tectonic elements of the Afar Depression, and discusses its evolution. A combination of far-field stress, due to the convergence of the Eurasian and Arabian plates along the Zagros Orogenic Front, and uplift of the Afar Dome due to a rising mantle plume reinforced each other to break the lithosphere of the Arabian–Nubian Shield. Thermal anomalies beneath the Arabian–Nubian Shield in the range of 150 °C–200 °C, induced by a rising plume that mechanically and thermally eroded the base of the mantle lithosphere and generated pulses of prodigious flood basalt since ∼30 Ma. Subsequent to the stretching and thinning the Afar Dome subsided to form the Afar Depression. The fragmentation of the Arabian–Nubian Shield led to the separation of the Nubian, Arabian and Somalian Plates along the Gulf of Aden, the Red Sea and the Main Ethiopian Rift. The rotation of the intervening Danakil, East-Central, and Ali-Sabieh Blocks defined major structural trends in the Afar Depression. The Danakil Block severed from the Nubian plate at ∼20 Ma, rotated anti-clockwise, translated from lower latitude and successively moved north, left-laterally with respect to Nubia. The westward propagating Gulf of Aden rift breached the Danakil Block from the Ali-Sabieh Block at ∼2 Ma and proceeded along the Gulf of Tajura into the Afar Depression. The propagation and overlap of the Red Sea and the Gulf of Aden along the Manda Hararo–Gobaad and Asal–Manda Inakir rifts caused clockwise rotation of the East-Central Block. Faulting and rifting in the southern Red Sea, western Gulf of Aden and northern Main Ethiopian Rift superimposed on Afar. The Afar Depression initiated as diffused extension due to far-field stress and area increase over a dome elevated by a rising plume. With time, the lithospheric extension intensified, nucleated in weak zones, and developed into incipient spreading centers.