A database for worldwide seismicity quantification

The first step in a seismicity analysis usually consists of defining the seismogenic units, seismic zones or individual faults. The worldwide delimitation of these zones involves an enormous effort and is often rather subjective. Also, a complete recording of faults will not be available for a long time yet. The seismicity model presented in this paper therefore is not based on individually defined seismic zones but rather on the assumption that each point in a global 1/2° grid of coordinates represents a potential earthquake source. The corresponding seismogenic parameters are allocated to each of these points. The earthquake occurrence frequency, one of the most important parameters, is determined purely statistically by appropriately spreading out the positions of past occurrences. All the other significant seismicity characteristics, such as magnitude-frequency relations, maximum possible magnitude and attenuation laws including the dependence on focal depth are determined in a global 1/2° grid of co-ordinates. This method of interpreting seismicity data allows us to establish a transparent, sufficiently precise representation of seismic hazard which is ideally suited for computer-aided risk analyses.     

Cautious neotectonic hypotheses for assessing the seismic hazard in northeastern Italy

A simplified tectonic scheme for hazard purposes was recently adopted for northeastern Italy, introducing large generalized seismogenic areas containing systems of complex geometry faults. This scheme considers only major faults with documented seismic activity. In the present analysis, a different tectonic scheme, with linear elements as seismogenic sources, is presented. The assessment of the regional seismic hazard is done with the fault rupture model, its most important advantage being the recognition that the length of fault rupture during an earthquake is an important consideration in probabilistic calculations of seismic hazard. Moreover, some structures with no associated seismicity but with notable neotectonic activity are considered, and their contribution to the results investigated. Important uncertainties such as those in the maximum possible magnitude of future earthquakes, in the location of the fault, in the focal depth, and in the attenuation law are accounted for in the calculations and their influence studied. The results identify a seismic belt running from Lake Garda to Friuli and along the Yugoslav coast and are very similar to those already known for Friuli, with the largest values corresponding to the zone around Gemona. Some slight differences in the shape of the areas of equal acceleration are probably due to the delineation of the seismic sources of the proposed model. For a cautious elaboration, some neotectonic lines without present seismicity were added into the fault model. Their contribution is negligible in the areas of highest acceleration, but increases remarkably in the areas where acceleration is not expected to exceed the medium values.     

孕震构造块体与相应地震区划分方法

可靠地划分地震区可奠定地震预测与地震危险性评价的地质基础,具有十分重要的意义。笔者等通过研究分析指出板内孕震构造块体侧向边界可由区域性大断层或由区域性大断层与板块边界界定,底边界为康拉德面或低速高导层;板间孕震构造块体为俯冲板块,可由区域性大断层和(或)板块边界约束;在同一个孕震构造块体和同一轮地震周期的地震具有内在联系。因此,地震区可定义为代表相应孕震构造块体地震活动的区域,其可表征该块体内源自锁固段破裂的地震活动。基于笔者等提出的孕震构造块体和相应地震区边界确定原则,把全球两大地震带(环太平洋地震带和欧亚地震带)划分为62个地震区;每个地震区的分区方案均通过了多锁固段脆性破裂理论的检验,这说明方案可靠。进而,笔者等归纳总结了地震区划分方法。     

The seismogenic thickness in Italy: constraints on potential magnitude and seismic hazard

The thickness of the seismogenic layer is a key parameter for seismic hazard, since it can be used to constrain the maximum depth of faulting and the potential magnitude. In this study, we compute the seismogenic thickness in the Italian region by defining the lower seismicity cut‐off, using high‐quality hypocentral locations of earthquakes that occurred in the past decade. Along the eastern Alps, the seismogenic thickness is about 12–14 km, laterally homogeneous along the entire south‐verging thrust front. In the Apennines extensional belt, lateral changes in seismogenic thickness are evident, and correlate with changes in the seismic energy released by past earthquakes. The potential magnitude is larger in the southern Apennines where the seismogenic thickness is greater (16–18 km) than in the northern Apennines where it is less (6–10 km) and seismic energy is partially released by the creeping of faults.     

Seismotectonics of strike–slip earthquakes within the deep crust of southern Italy: Geometry, kinematics, stress field and crustal rheology of the Potenza 1990–1991 seismic sequences (Mmax 5.7)

We present a revision and a seismotectonic interpretation of deep crust strike–slip earthquake sequences that occurred in 1990–1991 in the Southern Apennines (Potenza area). The revision is motivated by: i) the striking similarity to a seismic sequence that occurred in 2002  140 km NNW, in an analogous tectonic context (Molise area), suggesting a common seismotectonic environment of regional importance; ii) the close proximity of such deep strike–slip seismicity with shallow extensional seismicity (Apennine area); and iii) the lack of knowledge about the mechanical properties of the crust that might justify the observed crustal seismicity. A comparison between the revised 1990–1991 earthquakes and the 2002 earthquakes, as well as the integration of seismological data with a rheological analysis offer new constraints on the regional seismotectonic context of crustal seismicity in the Southern Apennines. The seismological revision consists of a relocation of the aftershock sequences based on newly constrained velocity models. New focal mechanisms of the aftershocks are computed and the active state of stress is constrained via the use of a stress inversion technique. The relationships among the observed seismicity, the crustal structure of the Southern Apennines, and the rheological layering are analysed along a crustal section crossing southern Italy, by computing geotherms and two-mechanism (brittle frictional vs. ductile plastic strength) rheological profiles. The 1990–1991 seismicity is concentrated in a well-defined depth range (mostly between 15 and 23 km depths). This depth range corresponds to the upper pat of the middle crust underlying the Apulian sedimentary cover, in the footwall of the easternmost Apennine thrust system. The 3D distribution of the aftershocks, the fault kinematics, and the stress inversion indicate the activation of a right-lateral strike–slip fault striking N100°E under a stress field characterized by a sub-horizontal N142°-trending σ1 and a sub-horizontal N232°-trending σ3, very similar to the known stress field of the Gargano seismic zone in the Apulian foreland. The apparent anomalous depths of the earthquakes (> 15 km) and the confinement within a relatively narrow depth range are explained by the crustal rheology, which consists of a strong brittle layer at mid crustal depths sandwiched between two plastic horizons. This articulated rheological stratification is typical of the central part of the Southern Apennine crust, where the Apulian crust is overthrusted by Apennine units. Both the Potenza 1990–1991 and the Molise 2002 seismic sequences can be interpreted to be due to crustal E–W fault zones within the Apulian crust inherited from previous tectonic phases and overthrusted by Apennine units during the Late Pliocene–Middle Pleistocene. The present strike–slip tectonic regime reactivated these fault zones and caused them to move with an uneven mechanical behaviour; brittle seismogenic faulting is confined to the strong brittle part of the middle crust. This strong brittle layer might also act as a stress guide able to laterally transmit the deviatoric stresses responsible for the strike–slip regime in the Apulian crust and may explain the close proximity (nearly overlapping) of the strike–slip and normal faulting regimes in the Southern Apennines. From a methodological point of view, it seems that rather simple two-mechanism rheological profiles, though affected by uncertainties, are still a useful tool for estimating the rheological properties and likely seismogenic behaviour of the crust.     

Improved earthquake locations in the Koyna-Warna seismic zone

In estimating the likelihood of an earthquake hazard for a seismically active region, information on the geometry of the potential source is important in quantifying the seismic hazard. The damage from an earthquake varies spatially and is governed by the fault geometry and lithology. As earthquake damage is amplified by guided seismic waves along fault zones, it is important to delineate the disposition of the fault zones by precisely determined hypocentral parameters. We used the double difference (DD) algorithm to relocate earthquakes in the Koyna-Warna seismic zone (KWSZ) region, with the P- and S-wave catalog data from relative arrival time pairs constituting the input. A significant improvement in the hypocentral estimates was achieved, with the epicentral errors <30 m and focal depth errors <75 m i.e. errors have been significantly reduced by an order of magnitude from the parameters determined by HYPO71. The earthquake activity defines three different fault segments. The seismogenic volume is shallower in the south by 3 km, with seismicity in the north extending to a depth of 11 km while in the south the deepest seismicity observed is at a depth of 8 km. By resolving the structure of seismicity in greater detail, we address the salient issues related to the seismotectonics of this region.     

A new view of Italian seismicity using 20 years of instrumental recordings

In this paper, we show the seismicity of the past 20 years that occurred in Italy and surrounding regions. Hypocentral locations have been obtained by using P- and S-wave arrival times from the INGV national and several regional permanent seismic networks. More than 48,000 events, selected from an original data set of about 99,780, are used to reconstruct the most complete seismic picture of the Italian region so far. The seismicity distribution allows inference on seismotectonics of this complex region of subduction versus continental collision. Our results clearly reveal the geometry of the Adria and the Ionian subduction and a continuous normal fault belt in the upper crust, following the Apennines mountain range. The depth of the seismogenic layer is computed from the cut-off of seismicity at depth and shows large variations along and across the seismic active regions. Earthquakes are generated by the different velocity of slab retreat and the subsequent asthenospheric upwelling.     

Depth variation of seismic source scaling relations: implications for earthquake hazard in southeastern Australia

Advances in earthquake data acquisition and processing techniques have allowed for improved quantification of source parameters for local Australian earthquakes. Until recently, only hypocentral locations and local magnitudes (M_L) had been determined routinely, with little attention given to the inversion of additional source parameters. The present study uses these new source data (e.g. seismic moment, stress drop, source dimensions) to further extend our understanding of seismicity and the continental stress regime of the Australian landmass and its peripheral regions.

Earthquake activity within Australia is typically low, and the proportion of small to large events (i.e. the b value) is also low. It is observed that average stress drops for southeastern Australian earthquakes appear to increase with seismic moment to relatively high levels, up to approximately 10 MPa for M_L 5.0 earthquakes. This is thought to be indicative of high compressive crustal stress, coupled with strong rocks and fault asperities. Furthermore, the data indicates that shallow focus earthquakes (shallower than 6 km) appear to produce lower than average stress drops than deeper earthquakes (between 6 and 20 km) with similar moment.

Recurrence estimates were obtained for a discrete seismogenic zone in southeastern Australia. Decreasing b values with increasing focal depth for this zone indicate that larger earthquakes (with high stress drops) tend to occur deeper in the crust. This may offer an explanation for the apparent increase of stress drop with hypocentral depth. Consequently, earthquake hazard estimates that assume a uniform Gutenburg–Richter distribution with depth (i.e. constant b value) may be too conservative and therefore slightly overestimate seismic hazard for surface sites in southeastern Australia.     

福建仙游地区高精度地震震源定位及深部断裂特征

福建仙游位于福建省东南沿海中部,其周边地区历史地震活动较平静,属于弱震区。但自从该地区的金钟水库于2010年5月下闸蓄水后,库区附近的地震活动性随之增强。为深入了解该地区的地震活动性、地震分布特征以及寻找隐伏断层,利用中国地震局提供的地震初至震相数据,使用双差定位方法对仙游地区近10年发生的地震进行重定位,获得了更为精确的震源位置,并根据重定位结果模拟深部断裂,寻找隐伏断层。结果显示：(1)重定位后的震源位置更加集中,按照发震时间可分为4个活动区,主要沿沙县—南日岛的次级断裂石苍断裂两侧北西向线性分布。(2)重定位后仙游震群的震源深度主要为8～11 km。石苍断裂左侧地震条带震源深度为6～12 km;右侧地震条带呈现明显的分层现象,上层西北侧地震较为分散,东南侧地震分布较紧凑,震源深度同左侧一样为6～12 km,而下层地震较少,震源深度为14～23 km。(3)根据重定位后的震源位置,利用奇异值分解法拟合得到三个深部断层面,其倾向均为南西向,走向为北西向,与石苍断裂和潼关断裂的倾向和走向一致。结合前人研究成果和本研究结果,推测石苍断裂并不是主发震断层,而是其两侧存在的深部断裂(高倾角隐...     

Probabilistic seismic hazard maps for the sultanate of Oman

This study presents the results of the first probabilistic seismic hazard assessment (PSHA) in the framework of logic tree for Oman. The earthquake catalogue was homogenized, declustered, and used to define seismotectonic source model that characterizes the seismicity of Oman. Two seismic source models were used in the current study; the first consists of 26 seismic source zones, while the second is expressing the alternative view that seismicity is uniform along the entire Makran and Zagros zones. The recurrence parameters for all the seismogenic zones were determined using the doubly bounded exponential distribution except the zones of Makran, which were modelled using the characteristic distribution. Maximum earthquakes were determined and the horizontal ground accelerations in terms of geometric mean were calculated using ground-motion prediction relationships developed based upon seismic data obtained from active tectonic environments similar to those surrounding Oman. The alternative seismotectonic source models, maximum magnitude, and ground-motion prediction relationships were weighted and used to account for the epistemic uncertainty. Hazard maps at rock sites were produced for 5?% damped spectral acceleration (SA) values at 0.1, 0.2, 0.3, 1.0 and 2.0?s spectral periods as well as peak ground acceleration (PGA) for return periods of 475 and 2,475?years. The highest hazard is found in Khasab City with maximum SA at 0.2?s spectral period reaching 243 and 397?cm/s² for return periods 475 and 2,475 years, respectively. The sensitivity analysis reveals that the choice of seismic source model and the ground-motion prediction equation influences the results most.     

On the Bayesian analysis of the earthquake hazard in the North-East Indian peninsula

The Bayesian extreme-value distribution of earthquake occurrences has been used to estimate the seismic hazard in 12 seismogenic zones of the North-East Indian peninsula. The Bayesian approach has been used very efficiently to combine the prior information on seismicity obtained from geological data with historical observations in many seismogenic zones of the world. The basic parameters to obtain the prior estimate of seismicity are the seismic moment, slip rate, earthquake recurrence rate and magnitude. These estimates are then updated in terms of Bayes’ theorem and historical evaluations of seismicity associated with each zone. From the Bayesian analysis of extreme earthquake occurrences for North-East Indian peninsula, it is found that for T = 5 years, the probability of occurrences of magnitude (M _w = 5.0–5.5) is greater than 0.9 for all zones. For M _w = 6.0, four zones namely Z1 (Central Himalayas), Z5 (Indo-Burma border), Z7 (Burmese arc) and Z8 (Burma region) exhibit high probabilities. Lower probability is shown by some zones namely␣Z4, Z12, and rest of the zones Z2, Z3, Z6, Z9, Z10 and Z11 show moderate probabilities.     

Near-field probabilistic seismic hazard analysis with characteristic earthquake effects

In conventional seismic hazard analysis, uniform distribution over area and magnitude range is assumed for the evaluation of source seismicity which is not able to capture peculiar characteristic of near-fault ground motion well. For near-field hazard analysis, two important factors need to be considered: (1) rupture directivity effects and (2) occurrence of scenario characteristic ruptures in the nearby sources. This study proposed a simple framework to consider these two effects by modifying the predictions from the conventional ground motion model based on pulse occurrence probability and adjustment of the magnitude frequency distribution to account for the rupture characteristic of the fault. The results of proposed approach are compared with those of deterministic and probabilistic seismic hazard analyses. The results indicate that characteristic earthquake and directivity consideration both have significant effects on seismic hazard analysis estimates. The implemented approach leads to results close to deterministic seismic hazard analysis in the short period ranges (T < 1.0 s) and follows probabilistic seismic hazard analysis results in the long period ranges (T > 1.0 s). Finally, seismic hazard maps based on the proposed method could be developed and compared with other methods.     

Seismicity assessment of Fukushima region,fault kinematics and calculation of PGA value for Idosawa fault in Hamadori area,Japan

Natural Hazards - In depth assessment of seismicity distribution for a particular region like Fukushima, prefecture is key towards reliable seismic hazard analysis for the area. Assessment of...     

Multi-scale imaging of a slow active fault zone: contribution for improved seismic hazard assessment in the Swiss Alpine foreland

Seismic hazard assessment of slow active fault zones is challenging as usually only a few decades of sparse instrumental seismic monitoring is available to characterize seismic activity. Tectonic features linked to the observed seismicity can be mapped by seismic imaging techniques and/or geomorphological and structural evidences. In this study, we investigate a seismic lineament located in the Swiss Alpine foreland, which was discussed in previous work as being related to crustal structures carrying in size the potential of a magnitude M 6 earthquake. New, low-magnitude (?2.0 ≤ M_L ≤ 2.5) earthquake data are used to image the spatial and temporal distribution of seismogenic features in the target area. Quantitative and qualitative analyses are applied to the waveform dataset to better constrain earthquakes distribution and source processes. Potential tectonic features responsible for the observed seismicity are modelled based on new reinterpretations of oil industry seismic profiles and recent field data in the study area. The earthquake and tectonic datasets are then integrated in a 3D model. Spatially, the seismicity correlates over 10–15 km with a N–S oriented sub-vertical fault zone imaged in seismic profiles in the Mesozoic cover units above a major decollement on top of the mechanically more rigid basement and seen in outcrops of Tertiary series east of the city of Fribourg. Observed earthquakes cluster at shallow depth (<4 km) in the sedimentary cover. Given the spatial extend of the observed seismicity, we infer the potential of a moderate size earthquake to be generated on the lineament. However, since the existence of along strike structures in the basement cannot be excluded, a maximum M 6 earthquake cannot be ruled out. Thus, the Fribourg Lineament constitutes a non-negligible source of seismic hazard in the Swiss Alpine foreland.     

Probabilistic seismic hazard at the archaeological site of Gol Gumbaz in Vijayapura,south India

Probabilistic seismic hazard analysis (PSHA) is carried out for the archaeological site of Vijayapura in south India in order to obtain hazard consistent seismic input ground-motions for seismic risk assessment and design of seismic protection measures for monuments, where warranted. For this purpose the standard Cornell-McGuire approach, based on seismogenic zones with uniformly distributed seismicity is employed. The main features of this study are the usage of an updated and unified seismic catalogue based on moment magnitude, new seismogenic source models and recent ground motion prediction equations (GMPEs) in logic tree framework. Seismic hazard at the site is evaluated for level and rock site condition with 10% and 2% probabilities of exceedance in 50 years, and the corresponding peak ground accelerations (PGAs) are 0.074 and 0.142 g, respectively. In addition, the uniform hazard spectra (UHS) of the site are compared to the Indian code-defined spectrum. Comparisons are also made with results from National Disaster Management Authority (NDMA 2010), in terms of PGA and pseudo spectral accelerations (PSAs) at T = 0.2, 0.5, 1.0 and 1.25 s for 475- and 2475-yr return periods. Results of the present study are in good agreement with the PGA calculated from isoseismal map of the Killari earthquake, \({\hbox {M}}_{\mathrm{w}} = 6.4\) (1993). Disaggregation of PSHA results for the PGA and spectral acceleration (\({\hbox {S}}_{\mathrm{a}}\)) at 0.5 s, displays the controlling scenario earthquake for the study region as low to moderate magnitude with the source being at a short distance from the study site. Deterministic seismic hazard (DSHA) is also carried out by taking into account three scenario earthquakes. The UHS corresponding to 475-yr return period (RP) is used to define the target spectrum and accordingly, the spectrum-compatible natural accelerograms are selected from the suite of recorded accelerograms.     

A seismic source zone model for the seismic hazard assessment of the Italian territory

We designed a new seismic source model for Italy to be used as an input for country-wide probabilistic seismic hazard assessment (PSHA) in the frame of the compilation of a new national reference map.

We started off by reviewing existing models available for Italy and for other European countries, then discussed the main open issues in the current practice of seismogenic zoning.

The new model, termed ZS9, is largely based on data collected in the past 10 years, including historical earthquakes and instrumental seismicity, active faults and their seismogenic potential, and seismotectonic evidence from recent earthquakes. This information allowed us to propose new interpretations for poorly understood areas where the new data are in conflict with assumptions made in designing the previous and widely used model ZS4.

ZS9 is made out of 36 zones where earthquakes with M_w > = 5 are expected. It also assumes that earthquakes with M_w up to 5 may occur anywhere outside the seismogenic zones, although the associated probability is rather low. Special care was taken to ensure that each zone sampled a large enough number of earthquakes so that we could compute reliable earthquake production rates.

Although it was drawn following criteria that are standard practice in PSHA, ZS9 is also innovative in that every zone is characterised also by its mean seismogenic depth (the depth of the crustal volume that will presumably release future earthquakes) and predominant focal mechanism (their most likely rupture mechanism). These properties were determined using instrumental data, and only in a limited number of cases we resorted to geologic constraints and expert judgment to cope with lack of data or conflicting indications. These attributes allow ZS9 to be used with more accurate regionalized depth-dependent attenuation relations, and are ultimately expected to increase significantly the reliability of seismic hazard estimates.     

白龙江引水工程代古寺水库及其周围地区地震危险性评估

白龙江引水工程是我国拟建的一项重大战略工程,而代古寺水库是该工程的水源枢纽。代古寺水库及其周围地区(本文研究区)活动断层发育、大地震频发,故亟需开展可靠的地震危险性评估,为该研究区内的工程建设和运营保驾护航。由于传统评估方法物理依据不足,难以正确评估研究区的地震危险性,故本文采用了基于地震物理预测的地震危险性评估新方法。研究结果表明,该研究区位于海原地震区,未来100年内该研究区的地震危险性主要源于海原地震区的下一次M_S8.5标志性地震。根据断层地震活动、发震潜力与展布特征,我们预判了该标志性地震的可能发震断层和震中位置;应用地震烈度衰减关系,考虑不同震中位置,分别计算了其产生的地震烈度。为确保“百年大计”的白龙江引水工程代古寺水库水资源枢纽安全,我们建议该研究区的抗震设防烈度不宜低于8度。     

Rheological implications of the strong seismic reflector in the Kakkonda geothermal field, Japan

We re-processed the seismic reflection survey data of the Kakkonda geothermal field. The pre-stack migration delineates a strong and continuous reflector between 1800- and 2800-m depth, below which formations are not reflective. Earthquake data exhibit seismicity in the upper crust. The lower boundary of seismogenic layer is interpreted as the brittle–ductile transition. The thermal structure is thought to be the major factor controlling its depth. We compared the strong reflector with the thermal and rheological structure from drillholes. The depth of the reflector corresponds to the top of the highly–very highly fractured zone observed from formation microscanner imagery (FMI) logging in the Miocene formations. The density of fracture in the Kakkonda granite is very low, suggesting that granite corresponds to the nonreflective zone. The temperature–depth profile of well WD-1a shows that the temperature at the highly–very highly fractured zone is about 350 °C. This corresponds to a hydrothermal convection zone filled with two-phase geothermal fluid. The cut-off depth of seismicity that indicates the brittle–ductile transition lies at the isotherm of 300–350 °C near the reflector. We conclude that the strong seismic reflector is a strong contrast in acoustic impedance at the top of the fractured layer. The fractured layer could be a decoupling plane caused by different tectonic behaviors between the upper brittle and the lower ductile layers or a dehydration front by thermal diffusion. The similarity between the strong reflector and K-horizon, the strong reflector, found in southern Tuscany, Italy suggests that the P-wave reflector at the top of highly fractured zone at the brittle–ductile transition be common in areas with magmatic activity.