Reconstructions of the Mediterranean Outflow Water during the quaternary based on the study of changes in buried mounded drift stacking pattern in the Gulf of Cadiz

Contourite deposits in the central sector of the middle slope of the Gulf of Cadiz have been studied using a comprehensive acoustic, seismic and core database. Buried, mounded, elongated and separated drifts developed under the influence of the lower core of the Mediterranean Outflow Water are preserved in the sedimentary record. These are characterised by depositional features in an area where strong tectonic and erosive processes are now dominant. The general stacking pattern of the depositional system is mainly influenced by climatic changes through the Quaternary, whereas changes in the depositional style observed in two, buried, mounded drifts, the Guadalquivir and Huelva Drifts, are evidence of a tectonic control. In the western Guadalquivir Drift, the onset of the sheeted drift construction (aggrading QII unit) above a mounded drift (prograding QI unit) resulted from a new Lower Mediterranean Core Water hydrodynamic regime. This change is correlated with a tectonic event coeval with the Mid Pleistocene Revolution (MPR) discontinuity that produced new irregularities of the seafloor during the Mid- to Late-Pleistocene. Changes in the Huelva Drift from a mounded to a sheeted drift geometry during the Late-Pleistocene, and from a prograding drift (QI and most part of QII) to an aggrading one (upper seismic unit of QII), highlight a new change in oceanographic conditions. This depositional and then oceanographic change is associated with a tectonic event, coeval with the Marine Isotope Stage (MIS) 6 discontinuity, in which a redistribution of the diapiric ridges led to the development of new local gateways, three principal branches of the Mediterranean Lower Core Water, and associated contourite channels. As a result, these buried contourite drifts hold a key palaeoceanographic record of the evolution of Mediterranean Lower Core Water, influenced by both neotectonic activity and climatic changes during the Quaternary. This study is an example of how contourite deposits and erosive elements in the marine environment can provide evidence for the reconstruction of palaeoceanographic and recent tectonic changes.     

珠江口盆地白云凹陷陆坡区10.5 Ma以来的沉积体系

通过对珠江口盆地白云凹陷陆坡区10.5Ma以来的地震相分析,共识别出席状平行亚平行地震相、透镜状前积地震相、深切河谷地震相、帚状地震相和杂乱地震相,不同的地震相分别代表不同的沉积体系类型。综合所识别的地震相类型,分析了陆架边缘下切谷、浊积扇和陆架边缘三角洲3种主要的沉积体系及其配置关系。物源供给是影响陆坡区沉积体系发育的最重要因素,是沉积体系发育的物质基础,海平面变化和构造运动为沉积体系发育提供了可容纳空间,3种影响因素共同影响了陆坡区沉积体系的发育。     

The influence of differential sedimentary loading and compaction on the development of a deltaic rollover

Three-dimensional seismic data and wireline logs from the western Niger Delta were analyzed to reveal the sedimentary and tectonic history of a major deltaic growth-fault depocenter comprising a kilometer-scale rollover anticline. The seismic units of the rollover show a non-uniform thickness distribution with their respective maximum near the main bounding growth-fault on the landward side of the system. This wedge-shaped sediment-storage architecture ultimately reflects the non-uniform creation of accommodation space in the study area that was controlled by 1) the differential compaction of the hanging-wall and footwall strata, 2) the lateral variation of fault-induced tectonic subsidence above the listric master fault, and possibly 3) local subsidence related to the subsurface movement of mobile shale reacting to loading and buoyancy. A sequential three-dimensional decompaction of the interpreted deltaic rollover units allowed to reconstruct and measure the compaction development of the rollover succession through time, documenting that sediment compaction contributed per depositional interval to between 25 and 35% of the generation of depositional space subsequently filled by deltaic sediments. The incremental decompaction of sedimentary units was further used to quantify the cumulative amount of accommodation space at and around the studied rollover that was created by fault movement, shale withdrawal, regional tectonic subsidence, isostasy and changes in sea level. If data on the regional subsidence and eustasy are available, the contribution of these basinwide controls to the generation of depositional space can be subtracted from the cumulative accommodation balance, which ultimately quantifies the amount of space for sediments to accumulate created by fault movement or shale withdrawal. This observation is important in that it implies that background knowledge on subsidence, stratigraphic age and sea-level changes allows to reconstruct and quantify fault movement in syn-tectonic deltaic growth successions, and this solely based on hanging-wall isopach trends independent of footwall information.     

冲绳海槽西部陆坡地震相模式与沉积体系

对冲绳海槽西部陆坡上两个航次(95航次和99航次)共计2000多公里的单道地震资料进行分析和解译,对斜坡沉积环境下沉积体系发育、分布特征进行了研究。结果表明：a)冲绳海槽西部斜坡环境下,上新世以来的沉积层均不同程度的变形和错动;b)存在两种斜坡相地震反射模式——退覆模式和叠覆模式,这两种模式都反映了冲绳海槽西部陆坡得到充足的沉积物供给;c)斜坡环境下主要发育陆架边缘三角洲、重力流沉积和水道充填等沉积体系;d)沉积层发育特征表明,冲绳海槽西部陆坡具有北段坡度缓、沉积物供应丰富、构造相对不活跃,中段坡度陡、沉积物供应充足、构造活动强烈,南段坡度陡、沉积供应相对较少、构造和火山活动十分强烈3种主要沉积环境。西部陆坡的沉积特征也揭示了东海陆架向陆坡提供了大量碎屑沉积物质。     

可容空间的研究进展

可容空间概念是层序地层学理论体系中的一个重要组成部分。可容空间受到层序地层学理论中的构造沉降、海平面升降、沉积物供给和气候等4大控制要素的影响和控制,其中由不同构造背景所控制的盆地的演化特点对可容空间的性质和变化具有重要意义。在盆地内部可容空间发育具有不均衡性,其分析方法主要有构造沉降曲线和海平面升降曲线叠加法和断层活动计算法等。     

Sedimentology and depositional architecture of tidal compound dunes on a carbonate ramp: The lower Miocene deposits of the central Apennine (Latium,Italy)

The sedimentology and sequence stratigraphy of the central Apennine lower Miocene carbonate deposits (Guadagnolo Formation) are the goal of this paper. The Guadagnolo carbonate ramp deposits consist of a thick succession of three main lithofacies: marls, marly limestones and cross-bedded limestones. The lateral and vertical facies distribution, as well as the biota assemblages, suggests a deposition of these sediments along the middle-outer ramp sector of the Latium-Abruzzi carbonate platform. All the data suggest sedimentation under the influence of tidal currents that were responsible of bedforms generation as simple and compound dunes. These bodies are developed on metric and decametric scale, and are stacked one to other to form complex sedimentary bodies extending both in strike and dip section for several tens to hundred meters. The dune system developed in a semiclosed basin (the Paleoadriatic sea), open in the southern and closed in the northern sector respectively. Within this basin a probably amphidromic system developed. The flow sediment transport was dominantly westward, and was conditioned by the ramp paleotopography. From a sequence stratigraphic point of view several high and low rank depositional sequences that were differentiated basing on their relative physical scale (thickness of each unit) and on the lateral extension of the unconformities and the correlative conformities bounding them were recognized. The hierarchy of recognized sequence-stratigraphic units include, from the smallest to the largest: simple depositional sequences, low-rank composite depositional sequences and high-rank composite depositional sequences. In the Guadagnolo succession four high-rank composite depositional sequences having a duration variable from 0.9 to 1.6 Ma, and named Guadagnolo 1, 2, 3, and 4, were recognized. These high-rank composite sequences are internally constituted by a stacking of simple and low-rank composite depositional sequences, having a duration ranging from 40 ka to 200 ka. All these units constitute part of a higher-rank composite sequence developing between 21 and 14.80 Ma that we name “The Guadagnolo Depositional Sequence”. The wedge-shaped geometry, the thickness variation and the stacking pattern of the Guadagnolo succession are the response to eustasy and tectonic subsidence. The glacial eustasy mostly controlled the formation of the high-frequency depositional sequences, tectonic subsidence, related to the roll-back of the hinge west-directed subduction in turn connected to the advancement of the Apennine thrust modulated the accommodation space.     

Tectono-stratigraphy of Lower Cretaceous Tanan sub-basin,Tamtsag Basin,Mongolia: Sequence architecture,depositional systems and controls on sediment infill

Tanan sub-basin is an active-fault bounded basin. The spatial distribution and temporal evolution of depositional systems were significantly influenced by tectonics. Fault movement and stages of basin development controlled the subsidence rates and the potential for erosion and the rate of sediment supply. Distinct stages of rift evolution during the early Cretaceous can be recognized, namely the early syn-rift, rift climax and late syn-rift stages. Three types of lacustrine sequence, consisting of distinctive depositional systems, are distinguished: (1) the early syn-rift sequences (SQ1 + SQ2), which are composed mainly of fan delta and shallow lacustrine depositional systems; (2) the rift climax sequences (SQ3) which developed in response to rapid and differential tectonic subsidence rates, and consist of fan delta, deep lacustrine and sublacustrine fan depositional systems; and (3) the late syn-rift sequences (SQ4) which are comprised of braided-delta and shallow lacustrine depositional systems. Each of the three lacustrine sequence architectures stands for a particular stage of basin fill and reflects variable rates of basin subsidence. Within each sequence, depositional systems and their stacking patterns are interpreted to have been a function of the interaction between tectonics and sediment supply. Differential subsidence across the basin, related to rotation of fault blocks, resulted in the formation of distinct paleomorphologies in different structural settings. These settings were fault-scarp zones controlling the development of fan-deltas, fault-terrace zones controlling the development of fan-delta and sublacustrine fans, half-graben dip-slope zones controlling the development of braided river and braided deltas, and intra-basinal fault-break zones controlling the development of sublacustrine fans. During the late syn-rift stage, active tectonism, displacement on the boundary faults had ceased. At this stage the depositional systems and their stacking patterns were dominantly related to the sediment supply rates, and not to tectonic activity.     

莘县凹陷下第三系层序地层学分析

根据地震反射特征、古生物组合、湖水面变化及构造变动，应用层序地层学原理，对下第三系进行层序划分，分析了地震相类型，总结出主要的沉积体系特征及其展布规律     

Cenozoic sedimentary evolution of deepwater sags in the Pearl River Mouth Basin, northern South China Sea

Recent exploration revealed the high potential for hydrocarbon in the deepwater sags, Pearl River Mouth Basin, northern South China Sea. This paper reports its Cenozoic sedimentary evolution through backstripping of high precision depth data of interpreted sequence boundaries. Local backstripping parameters were mapped based on well and geophysical data. Sensitivity analysis indicates that the reliability of decompaction results were largely improved by using the local porosity parameters and the lithological parameters that vary with grid nodes. Maps of sedimentation rates of 17 sequences from 65 Ma to the present were constructed, showing the spatial–temporal variation of the sedimentation rate. Three rapid depositional stages, 65–32, 29–23.3, 18.5–10.5 Ma, and three slow depositional stages, 32–29, 23.3–18.5, 10.5–0 Ma, were identified with abrupt changes of sedimentary patterns. The three rapid depositional stages were in accord with syn-rifting stage, the first post-rifting depositional stage, and the second post-rifting depositional stage, respectively. And the three slow depositional stages were in keeping with three tectonic events respectively. Several significant sedimentary discontinuities at 32, 23.3 and 10.5 Ma were observed and discussed. The comparison between the study area and the ODP Site 1148 at 32–23.3 Ma indicates that before ~29 Ma the ODP Site 1148 was at similar sedimentation regime as that in the Baiyun and Liwan sags, but significant diversity appeared after ~29 Ma, when a large quantity of terrigenous sediments was trapped by strong post-rifting subsidence in the Baiyun and Liwan sags and could not reach the lower slope areas. Study revealed that the most rapid accumulation from 18.5 to 17.5 Ma might be mainly owing to the large sediment supply during this strong monsoon period.     

Tectono-sequence stratigraphic analysis of the Lower Cretaceous Abu Gabra Formation in the Fula Sub-basin,Muglad Basin,southern Sudan

The Fula Sub-basin of the Muglad Basin of southern Sudan is an active-fault bounded basin with an area of approximately 3300 km². The Lower Cretaceous Abu Gabra Formation formed during the first of three rifting cycles. It can be subdivided into five 3rd-order sequences named SQA∼SQE from bottom to top, indicating five stages of tectonostratigraphy and tectonosedimentary evolution. The spatial distribution and temporal evolution of clastic depositional systems are described in this paper based on integrated analysis of seismic, core and well logging data. In the Abu Gabra Formation of the Fula Sub-basin, a variety of depositional systems are recognized, namely, fan delta, braided delta, delta, sublacustrine fan and lacustrine system. The Fula Sub-basin has undergone a complex and phased rifting evolution, and a high abundance of transfer zones developed, causing the resulting distribution and architecture of both the sequence and depositional system to be controlled by various types of transfer zones. The following three types of sequence architectures from northern to southern part of the Fula Sub-basin have been identified: simple dustpan-shaped sequence architecture in the north, transfer-zone sequence stratigraphic architecture in the middle and graben-shaped sequence architecture in the south. The sequence architecture is under the control of the large-scale central transfer zone, and nine models are built to study the effect of at least three categories of small-scale transfer zones on the depositional systems in the Fula Sub-basin. The small-scale transfer zones play significant roles in basin fill, primarily in controlling of the positions of deposit-input points. This study provides valuable insights into tectonic control of depositional systems and sequence architectures in a continental rift basin such as the Fula Sub-basin.     

Present temperature field and Cenozoic thermal history in the Dongpu depression,Bohai Bay Basin,North China

The Dongpu depression is located in the southern Bohai Bay Basin, North China, and it has abundant oil and gas reserves. There has been no systematic documentation of this depression's temperature field and thermal history. In this article, the present geothermal gradient and heat flow were calculated for 68 wells on the basis of 892 formation-testing data from 523 wells. Moreover, the Cenozoic thermal history was reconstructed using 466 vitrinite reflectance data from 105 wells. The results show that the Dongpu depression is characterized by a medium-temperature field between stable and active tectonic areas, with an average geothermal gradient of 34.8 °C/km and an average heat flow of 66.8 mW/m². The temperature field in the Dongpu depression is significantly controlled by the Changyuan, Huanghe, and Lanliao basement faults and thin lithosphere thickness. The geothermal gradient twice experienced high peaks. One peak was during the Shahejie 3 Formation depositional period, ranging from 45 °C/km to 48 °C/km, and the second peak was in the middle and late of the Dongying Formation depositional period, ranging from 39 °C/km to 40 °C/km, revealing that the Dongpu depression experienced two strong tectonic rifts during the geothermal gradient high peak periods. The geothermal gradient began to decrease from the Neogene, and the geothermal gradient is 31–34 °C/km at the present day. In addition, these results reveal that source rock thermal evolution is controlled by the paleo temperature field of the Dongying Formation depositional period in the Dongpu depression. This study may provide a geothermal basis for deep oil and gas resource evaluation in the Dongpu depression.     

Aggrading and prograding infill of a peri-Tyrrhenian Basin (Naples Bay, Italy)

High-resolution seismic reflection data are used in the identification of the stratigraphic succession filling Naples Bay, a tectonically active half-graben located in the extensional margin of the eastern Tyrrhenian Sea. The architecture of the basin infill is characterized by fourth-order depositional sequences correlated to Quaternary eustatic oscillations. These depositional sequences form aggrading and prograding stacking patterns bounded by tectonically enhanced unconformities. The changes that the stacking patterns undergo record variations in accommodation space rates. These variations are a result of the tectonic subsidence produced during the evolution of the half-graben. Received: 7 July 1998 / Revision received: 29 March 1999     

Stratigraphic division and depositional processes for the Mesozoic basin in Northern South China Sea

This paper divided the age of Mesozoic strata in the Northern South China Sea into epochs by the stratigraphic correlation between land and sea areas. A Mesozoic stratigraphic profile from South China to the northern continental slope of the South China Sea was constructed by ground and seismic surveys. The depositional process was illustrated by the chronostratigraphic framework of the Mesozoic basin, and the oil and gas exploration prospect was discussed. Results indicate that the depositional process from the initial transgression in the Late Triassic to the Mesozoic maximum flooding event that occurred in the Early Jurassic period formed a continuous transgression when the depositional environment varied from littoral to semi-closed gulf and shelf. After this maximum flooding event, a continuous marine regressive process developed, including seawater withdrawal from the South China epicontinental region at the end of the Early Jurassic period, seawater withdrawal to the outer shelf of the Northern South China Sea at the end of the Early Cretaceous period, and seawater withdrawal to the slope trough at the end of the Cretaceous period. Research achievement not only connects major Mesozoic geological events but also specifies the time nodes of such events. Thus, an investigation of this event is significant to the Mesozoic tectonic evolution study of the South China Sea and Paleo-Pacific Ocean.     

Sedimentary evolution of the northwestern Alboran Sea during the Quaternary

Five depositional bodies occur within the Quaternary deposits of the northwestern Alboran Sea: Guadalmedina-Guadalhorce prodelta, shelf-edge wedges, progradational packages, Guadiaro channel-levee complex, and debris flow deposits. The sedimentary structure reflects two styles of margin growth characterized: 1) by an essentially sediment-starved outer, shelf and upper slope and by divergent slope seismic facies; 2) by a prograding sediment outer shelf, and parallel slope seismic facies. Eustatic oscillations, sediment supply, and tectonic tilting have controlled the type of growth pattern, and the occurrence of the depositional bodies. Debris flows were also controlled locally by diapirism.     

Global cyclostratigraphy: a model of carbonate growth patterns

Cyclostratigraphy is the study of cyclic depositional patterns produced by climatic and tectonic processes. A global-scale quantitative cyclostratigraphic model is described which simulates carbonate growth patterns controlled by tectonic and climatic processes. The model uses seven factors simulating the effects of physical and chemical environments on the deposition rates of carbonate accumulations. These factors are sea-level change, the rate of basement subsidence, food supply (influence of nutrients), available sunlight, temperature, salinity and dissolved oxygen. The factors are considered as functions of climatic and tectonic processes. The model also integrates Milankovitch-induced short-term climatic changes with the long-term tectonic evolution of basins to examine the potential carbonate accumulation patterns. The two-dimensional computer model results provided here show that: (1) carbonate growth patterns in different climates and under different tectonic processes can be modelled quantitatively; (2) carbonate production increases towards the equator (decreasing latitude) as the temperature and nutrition supply increase in tropical belts, and production changes because of expansion or contraction of the tropical belt in different climatic periods; (3) when matched with the turbidity, the model describes different carbonate accumulation patterns in different climatic patterns; (4) at either abnormally high or low salinity, carbonate accumulation rates decline sharply, and the salinity becomes normal away from the strand line; and (5) cyclic sea-level changes cause a cyclic change of carbonate accumulation. A case study is presented from the Upper Pennsylvanian of Texas. The simulation results indicate that carbonate growth patterns observed from field, well or seismic data are accurately modelled by the quantitative procedure given here.     

Rift sequence stratigraphy

Conventional sequence stratigraphy has been developed primarily for passive-margin basins. Despite the conceptual advances within the last 30 years, a suitable model for rift basins has not yet been devised. Many authors have attempted to adapt the passive-margin model to all other tectonic settings, including rifts, despite the fundamental differences in terms of the mechanisms controlling the formation and evolution of these sedimentary basins. Passive margins have their stratigraphic framework controlled largely by cyclic sea-level fluctuations superimposed on long-term thermal subsidence. By contrast, rift basins have their accommodation history strongly related to their mechanical subsidence regime, with episodic pulses of extension that create space for sediment accumulation at very fast rates. Stages of rapid mechanical subsidence are typically followed by longer periods of tectonic quiescence, when sediment supply gradually consumes and fills the available accommodation. This cyclicity results in depositional sequences that display overall progradational trends and coarsening-upward vertical stacking patterns. Sequence boundaries are often marked by sharp flooding surfaces related to the transgression of lacustrine or marine systems in response to rapid tectonic subsidence and the consequent ‘instantaneous’ generation of accommodation. As such, a typical rift depositional sequence starts with a flooding surface overlain by a relatively thin transgressive systems tract and a much better developed highstand systems tract. A renewed subsidence pulse leads to the drowning of the previous deposits and the start of a new depositional sequence. The strong asymmetry of the base-level curve resembles the shape of glacio-eustatic cycles, with fast transgressions followed by longer term regressions, although at potentially different temporal scales.     

The Gulf of Suez—northern Red Sea neogene rift: a quantitive basin analysis

Subsidence analysis (backstripping) was carried out on a series of wells from the Gulf of Suez and northern Red Sea region of Egypt in order to examine the interplay between tectonic events, basin subsidence, sedimentation and sea level changes in a young, developing ocean basin and continental margin. Using constraints on chronostratigraphy and paleodepth from various sources combined with stratigraphic and structural information from industry wells and other geophysical sources it has been possible to compile the data necessary to perform geohistory analyses throughout the region.Major subsidence due to crustal thinning began ∼25 Ma with sedimentation initially occurring in isolated sub-basins. These earliest sediments record the transition from continental to marine depositional environments. Subsequently during early and middle Miocene times subsidence was rapid and uniform along and across the entire rift basin. Open marine sedimentation occurred across all structural regimes. The mid-Clysmic tectonic event (16.5 Ma) resulted in structural rearrangement of the rift basin and uplift of the rift shoulders. Rapid subsidence continued as global sea level fell, producing a series of prograding, siliciclastic fan-deltas at the rift margins. At ∼15.5 Ma, opening of the Suez rift was terminated, tectonic subsidence decreased dramatically in the southern rift and ceased entirely in the northern rift. Tensional plate motion probably was transferred from the Gulf of Suez to sinistral strike-slip movement on the Dead Sea transform at this time. The quiescence in subsidence combined with a lowered global sea level resulted in the deposition of a thick (up to 4 km) series of evaporites within the central trough of the rift from the middle to latest Miocene. The accumulation of such a thick sequence of sediments during a phase of decreased tectonic subsidence is interpreted as a ‘filling-in’ of the rift topography which developed during the earlier period of rapid subsidence and rift-shoulder uplift and continued compaction.A rapid global sea level rise concomitant with a subsequent pulse of increased tectonic activity in the latest Miocene—earliest Pliocene returned the rift to dominantly marine conditions.     

Facies analysis of the Callovian–Oxfordian carbonates in the northeastern Amu Darya Basin,southeastern Turkmenistan

The Callovian–Oxfordian carbonates in the northeastern Amu Darya Basin of southeastern Turkmenistan, are composed of medium-to thick-bedded, mostly grainy limestones with various skeletal (bivalves, brachiopods, echinoderms, foraminifera, corals, and sponge) and non-skeletal grains (intraclasts, ooids, and peloids). The 6 microfacies types recognized in the Callovianand and 18 microfacies types in Oxfordian carbonates are grouped into two depositional phases, ramp and platform. The Callovian carbonates were deposited on a carbonate ramp, which evolved into a depositional platform in the Oxfordian. The main components of the Oxfordian platform margin complex are reefs and shoals. The principal reef builders are corals, algae and sponges. Regional tectonic movements, eustatic sea-level changes and sedimentation rates were the primary controlling factors of facies evolution during the Callovian–Oxfordian time in the northeastern Amu Darya Basin.     

Sedimentary,tectonic, and sea-level controls on submarine fan and slope-apron turbidite systems

To help understand factors that influence submarine fan deposition, we outline some of the principal sedimentary, tectonic, and sea-level controls involved in deep-water sedimentation, give some data on the rates at which they operate, and evaluate their probable effects. Three depositional end-member systems, two submarine fan types (elongate and radial), and a third nonfan, slope-apron system result primarily from variations in sediment type and supply. Tectonic setting and local and global sea-level changes further modify the nature of fan growth, the distribution of facies, and the resulting vertical stratigraphic sequences.     

Frequency analysis across the drowning of a Lower Jurassic carbonate platform: The Calcare Massiccio Formation (Apennines,Italy)

This work illustrates the evolution the Lower Jurassic shallow-water carbonates known as the Calcare Massiccio Formation in the Central Apennines (Italy). The Calcare Massiccio is characterized by lateral and vertical variability in the facies associations, related to an articulated physiography of the Triassic to Lower Jurassic carbonate platform and to its tectonic evolution. This work documents the depositional environment changes during the platform evolution. Quantitative analysis on samples collected from three stratigraphic sections were performed through the Calcare Massiccio succession allowed up to the overlying Pliensbachian pelagites. Two type of carbonate sedimentation have been recognized: in the peritidal and shallow subtidal environments (Calcare Massiccio A) the carbonate production is dominated by microbial activity, while the carbonate sedimentation in a deeper environment of middle to outer ramp (Calcare Massiccio B), is dominated by a bioclastic sedimentation.The evolution from the Calcare Massiccio A to the B can be interpreted as the product of increase of accommodation that in turn produced a backstepping of carbonate facies belt, the photic microbial dominated peritidal facies developed on the persistent Latium-Abruzzi Platform while the bioclastic carbonate production factory settled on the structural highs resulting from the dismembering of the platform by syn-sedimentary tectonic.The bioclastic carbonate factory was not efficient in filling the available accommodation space produced by Sinemurian extensional tectonic. This inefficiency was amplified by the restricted area available for this factory in the small structural highs. These conditions were sufficient to predispose the platform to the drowning without invoke change in the trophic resource or change in the palaeoceanography.