成都盆地不同工程地质分区内场地地震动参数的计算分析

场地条件对地震动幅值和频谱特性均有影响, 现行的中国地震动参数区划图根据场地类别调整地震动反应谱特征周期, 但尚未考虑到对地震动峰值和反应谱平台值的调整. 以成都盆地为例, 广泛收集了盆地范围内的工程钻孔资料. 考虑到不同工程地质分区内场地地震动参数可能存在较大差异, 在研究区工程地质分区的基础上, 利用等效线性化方法对钻孔进行了土层地震反应分析, 给出了成都盆地内不同工程地质分区的地震动参数调整系数建议值.      

基于小田原试验场地数据的不同基岩输入模型对预测地震动特征的影响研究

随着强震台网的密布及观测记录的增加,为研究各类局部场地地震反应预测模型的合理性提供了有效的参考依据,也使利用强震记录及场地条件研究地震动特征成为可能。选取场地地质参数资料和地震记录数据齐全的日本小田原（Ashigara Valley）盲测试验场地,通过对比不同地震动输入方式及场地反应分析模型,研究地震动特征,分析现有模型的优劣。基于1990年8月5日M5.1强震事件的地表基岩记录和地下基岩地震记录,采用地下台强震记录直接输入、地表基岩台强震记录减半为基底地震动输入、地表基岩台强震记录反演为基底地震动输入作为3种基岩地震动输入。基于局部场地条件分别建立一维等效线性模型、二维黏弹性模型及二维时域等效线性化模型等工程中常用的场地数值分析模型,进行局部场地地震反应分析,预测该盲测场地的地表地震动特征,并与对应的实测强震记录结果进行对比,分析不同基岩地震动输入方式对预测地震动特征及地表土层反应谱特征的影响,重点分析地震动输入、土体非线性、场地横向不均匀性及几何与非线性特征共同作用等因素对地表地震动特征的影响,以期为地表地震动的合理预测提供参考。     

非一致激励条件下非线性工程场地地震动相干函数研究

将土非线性分析的等效线性化方法与随机工程波动散射问题的求解方法相结合，建立了开放系统中非一致激励条件下考虑岩土介质非线性的工程场地地震动随机场数值模拟方法并研究了介质非线性对场地地震动相干性的影响。分析结果表明：与不考虑非线性相比，在地震过程中，场地土介质的非线性改变了复杂场地的局部特性从而导致场地地震动空间相干性的变化，因此有必要在场地地震动相干函数的分析中考虑场地介质非线性特性对地震动相干性的影响。     

结构参数对双链式悬索桥地震响应的影响

以某双链式悬索桥为工程背景,建立了空间有限元计算模型.运用几何非线性时程分析方法,分析并探讨了不同垂跨比、阻尼比,塔桥不同连接方式和双链位置对双链式悬索桥地震响应的影响.分析表明,竖向地震动分量使桥塔轴力迅速增大,加劲梁采用钢筋混凝土边梁可有效减小地震响应;塔梁间采用简支连接方案其抗震性能比固定支座连接方案、滑动支座连接方案要好;双链式悬索桥横向抗震性能优于单链式悬索桥.对双链式悬索桥抗震性能的研究,为此类悬索结构的设计选型,乃至减震、隔震及抗震加固提供了参考.     

渤海海域软土层土对地震动参数的影响研究

渤海海域软土层土对场地设计地震动参数取值具有显著影响.选取渤海中部钻孔剖面作为计算场地模型基础,分别构建软土和硬土场地模型,并通过改变软土层厚度,构造新的场地模型.采用等效线性化方法(EL法)和非线性计算方法(NL法)分别对场地模型进行地震反应分析,分析了海底软土层土对地震动参数的影响.研究结果表明:海底软土层土对地震...     

地下结构抗震理论分析与试验研究的发展展望

目前我国在地下结构抗震分析与破坏灾变机理研究中尚存在诸多问题需要解决,在分析总结我国地下结构抗震理论与试验研究的基础上,重点阐述了需要进一步深入研究的六个关键问题:地下结构振动模型试验研究技术,土体非线性动力本构模型,高轴压的地下结构承重构件地震破坏机理,非一致波动输入及非一致波动输入下地下结构的地震反应,饱和砂土液化大变形理论及本构模型,大型三维非线性土-结构动力相互作用分析模型。这些问题的研究和解决对于完善地下结构抗震理论分析方法与试验研究技术,获得大型地下结构在地震作用下的反应规律与破坏灾变机理具有重要的科学意义和工程应用价值。     

澳门地区建筑物设计地震动参数研究

根据澳门地区地震环境、场地特点,利用本地区的工程地质钻孔资料和相似地区的场地设计地震动参数研究成果,结合少量工程地震钻孔剖面的土层反应分析结果,合理地确定了澳门地区不同建筑场地类别的设计地震动参数,对于Ⅱ、Ⅲ类场地,按存在或不存在成片淤泥两种情况进行了反应谱特征周期参数分组,为澳门地区一般建筑工程的抗震设计提供了参考依据。     

双向速度脉冲地震下偏心重力柱核心筒结构的弹塑性地震响应研究

研究速度脉冲地震和结构质量偏心综合不利条件下新型重力柱-核心筒结构体系的弹塑性反应规律。选取速度脉冲和非速度脉冲地震加速度记录各10条,进行地震动双向输入,采用结构非线性分析软件CANNY进行有限元数值分析,研究脉冲型地震和结构质量偏心对新型体系弹塑性地震反应的影响。分析结果表明,速度脉冲型地震作用下各结构的层间位移角、层间剪力和层间扭转角显著高于非速度脉冲地震下的相应值。质量偏心对结构弹塑性抗震需求影响显著,层间位移角和层间扭转角都随着偏心率的增大而增大,而层间剪力则随偏心率的增大呈减小趋势。建议在重力柱-核心筒结构设计中应重视速度脉冲地震和结构偏心的耦合不利影响。     

北京地区中硬场地对地震动加速度反应谱的放大效应研究

当前,合理确定地震动峰值加速度与反应谱特征周期是工程场地地震动参数确定工作的主要内容。本文以北京地区典型中硬场地为研究对象,分析场地条件对不同周期地震动反应谱值的影响。首先,计算不同震级、震中距条件下的基岩地震动加速度反应谱,合成基岩输入地震动时程;再利用110个工程场地的钻孔资料进行土层地震反应计算,分析中硬场地条件对不同输入环境下的地震动加速度反应谱值的放大效应。结果表明,中硬场地对高、中频震动放大效应明显,尤其是对0.2-0.5s周期段地震动加速度反应谱值的放大倍数大多在1.3以上;场地覆盖层厚度变化对不同频段地震动加速度反应谱值的放大倍数所产生的影响是不同的,与场地自振周期的相关性很强;在不同的地震动输入环境下,中硬场地对不同频段地震动加速度反应谱的影响是不同的,这一结论对实际的抗震设防工作具有一定参考价值。     

龙头山集镇局部场地地震动效应分析

依据龙头山集镇6个典型场地上的钻探资料及土体的动力非线性特性试验数据,分别建立了相应场地的地震反应分析模型。以幅值折半的龙头山镇强震动台站（053LLT）东西向主震加速度记录作为入射地震动,采用一维土层地震反应分析等效线性化方法计算了场地地震反应,讨论了近地表覆盖土层结构对地震动加速度峰值及反应谱的影响,并对场地效应与震害的关系进行了分析。      

基于OpenSees的地震动对软土震陷影响研究

软土具有高灵敏度、低强度等特性,在地震过程中极易产生震陷。基于OpenSees数值模拟方法对软土场地的震陷反应进行非线性动力有限元分析,通过改变地震动峰值加速度、频谱特性、输入方式来研究其对软土震陷的影响。结果表明,地震动峰值加速度对地基土的不均匀震陷有显著影响,地震动峰值加速度越大,震陷量显著增大,震陷影响深度更大,对水平地表造成的破坏范围也更大;地震动频谱特性对软土震陷有重要影响,当地震动卓越频率与场地自振频率相近时,其幅值越大,产生的震陷越严重;水平、竖向同时输入地震动的方式能更好地反映土体的振动及震陷响应。该研究成果对探索软土震陷的机理有一定的指导意义。     

A brief theory and computing of seismic ground rotations for structural analyses

The seismic ground rotations are important with respect to spatial structural models, which are sensitive to the wave propagation. The rotational ground motion can lead to significant increasing of structural response, instability and unusual damages of buildings. Currently, the seismic analyses often take into account the rocking and torsion motions separately using artificial accelerograms. We present an exact analytical method, proposed by Nazarov [15] for computing of three rotational accelerograms simultaneously from given translational records. The method is based on spectral representation in the form of Fourier amplitude spectra of seismic waves, corresponding to the given three-component translational accelerogram. The composition, directions and properties of seismic waves are previously determined in the form of a generalized wave model of ground motion. It is supposed that seismic ground motion can be composed by superposition of P, SV, SH- and surface waves. As an example, the dynamic response analysis of 25-story building is presented. Here recorded (low-frequency) and artificial (high-frequency) accelerograms were used; each of them includes three translational and three rotational components. In this structural analysis, we have clarified primarily conditions under which rotational ground motion should be taken into account. Next, we have calculated three rotational components of seismic ground motion. Then they were taken as additional seismic loads components for further seismic analysis of the building. Note, soil–structure interaction (SSI) is not considered in this study. For computing, we use the special software for structural analyses and accelerogram processing (FEA Software STARK ES and Odyssey software, Eurosoft Co., Russia). It was developed and is used in engineering practice in the Central Research Institute of Building Constructions (TsNIISK, Moscow, Russia).     

THE EFFECT OF HARD INTERLAYER THICKNESS ONTHE SITE SEISMIC RESPONSE

Studies on the effect of near-surface overburden soil layers on seismic motion have shown that the overburden soil layers have a significant impact on the seismic effect of the site due to the formation age, genetic type, thickness difference, structure, and dynamic characteristics of the soil layers. In this paper, the one-dimensional seismic response analysis of a nuclear power plant site containing a thick hard interlayer was conducted to discuss the influence of the hard interlayer thickness on the site seismic response, so as to provide a basis for determining the seismic motion parameters for seismic design of similar sites. Based on the engineering geological data of a nuclear power plant site, five models of one-dimensional soil-layer seismic response analysis were built, and the equivalent linear method of the one-dimensional site seismic response was applied to analyze the effect of the interlayer thickness on the peak acceleration and the acceleration response spectra of the site seismic response. The seismic response characteristics of the site and influence rules of the hard interlayer thickness are summarized as follows:1)Under different input seismic motion levels, the peak acceleration at the top of the hard interlayer was less than the input peak acceleration, and the peak acceleration at the ground surface of site was greater than the input peak acceleration. 2)Under the same input seismic motion, the ratios of the peak accelerations at the top of hard interlayer to the input peak accelerations were smaller than the ratios of the peak accelerations at the ground surface to the input peak acceleration, and these ratios first decreased and then increased gradually with the increase of the hard interlayer thickness; while for the same hard interlayer thickness, these ratios gradually decreased as the input peak acceleration increasing. 3)For the same input seismic motion, the ratios of the peak accelerations at the ground surface of site to those at the top of the hard interlayer increased gradually as the hard interlayer thickness increased; however, corresponding to different hard interlayer thicknesses, the variation characteristics of ratios which are the peak accelerations at the ground surface of site to those at the top of the hard interlayer were inconsistent with the increase of the input peak acceleration. 4)The hard interlayer had a significant influence on the short-period acceleration response spectrum and the thicker the hard interlayer was, the wider the influence frequency band would be; while for a special hard interlayer thickness, the influence frequency band is certain, and the hard interlayer had little effect on the acceleration response spectrum coordinates outside this frequency band, the longer the period is, the less the influence of the hard interlayer on the acceleration response spectrum coordinates. The seismic response characteristics of the site and influence rules of the hard interlayer thickness indicate that the hard interlayer thickness has a significant impact on the peak acceleration and the acceleration response spectra of the site seismic response, and the hard interlayer has obvious isolation effect at the seismic motion, and the increase of its thickness reduces the nonlinear effect of the site and leads to the wider influence frequency band. Meanwhile, the higher the input peak acceleration is, the stronger the nonlinear effect of the site, and it's remarkable that the soft layer overlying the hard interlayer has a significant amplification effect on the seismic motion.     

不同土层地震反应计算程序对比分析

目前在中、美两国场地土层地震反应分析中,应用比较广泛的计算软件为ESE和SHAKE,两者均采用频域等效线性化方法处理非线性的土层动本构关系。本文采用上述软件分别对三种典型场地进行计算,分析两者差别及造成差别的原因。研究结果表明,SHAKE软件在深软场地时,计算反应谱和加速度峰值均与实际统计结果差别较大,不适合工程应用。ESE软件计算结果比较合理。     

Three‐dimensional modal pushover analysis of buildings subjected to two components of ground motion,including its evaluation for tall buildings

The modal pushover analysis (MPA) procedure, presently restricted to one horizontal component of ground motion, is extended to three‐dimensional analysis of buildings—symmetric or unsymmetric in plan—subjected to two horizontal components of ground motion, simultaneously. Also presented is a variant of this method, called the practical modal pushover analysis (PMPA) procedure, which estimates seismic demands directly from the earthquake response (or design) spectrum. Its accuracy in estimating seismic demands for very tall buildings is evaluated, demonstrating that for nonlinear systems this procedure is almost as accurate as the response spectrum analysis procedure is for linear systems. Thus, for practical applications, the PMPA procedure offers an attractive alternative whereby seismic demands can be estimated directly from the (elastic) design spectrum, thus avoiding the complications of selecting and scaling ground motions for nonlinear response history analysis. Copyright © 2010 John Wiley & Sons, Ltd.     

基于地震动参数的RC框架结构易损性分析

以某典型的12层钢筋混凝土框架结构作为研究对象,研究基于非线性动力时程分析和地震动参数的RC框架结构易损性分析方法。首先采用静力pushover分析判定结构薄弱层,并确定结构性能(capacity)参数;然后应用非线性动力时程分析估计结构地震反应,研究以峰值加速度和基本周期加速度反应谱作为地震动参数结构反应的不确定性,并进一步分析结构地震需求(demand)参数与地震动参数的关系;在此基础上,分别建立该结构基于峰值加速度和加速度反应谱的易损性曲线,通过考虑场地条件对地震动特性的影响,研究场地条件对结构易损性的影响,结果表明不同场地条件下的结构易损性曲线有一定差异。应用本文方法,根据新一代地震区划图或地震安全性评价确定的地震动参数,可以直接估计结构在未来地震中出现不同破坏的概率,这在结构的抗震性能评估和地震损失预测中有一定意义。     

地震动强度及频谱特征对场地地震反应分析结果的影响.

通过收集整理235个实际钻孔资料并建立了2820个计算工况,运用一维波动等效线性化地震反应分析方法,基于不同类别场地条件,研究在不同强度、频谱特性的地震动输入形式下,场地条件对地表地震动参数影响,重点考察地表峰值加速度的变化特征及规律,并对计算结果进行了统计回归分析,给出了不同场地类别条件下地表峰值放大倍数的一般经验值.由于我国现行抗震设计规范中,没有考虑地震烈度或地震动强度对设计反应谱的影响,也没有考虑地震动频谱特性对地表峰值的影响,因此,本文的研究成果可为未来修订抗震设计规范提供参考依据.     

Nonlinear surface ground analysis via statistical approach

A statistical approach is proposed for nonlinear surface ground analysis. In contrast to the conventional method which deals with only a single ground motion for equivalent linearization of soil properties, a design response spectrum defined at the upper level (bottom of the surface ground) of an engineering bedrock can be handled as the target design earthquake in the present paper. The effective shear strain in each soil layer is evaluated by means of a statistical procedure in which the mean peak shear strain is computed in terms of its standard deviation and the corresponding peak factor. The stiffness and damping ratio of each soil layer are obtained iteratively from the nonlinear relation of stiffness reduction factors and damping ratios with respect to the strain level. After the evaluation of the equivalent stiffness and damping ratio of every soil layer, the ground surface response spectrum is transformed from the design response spectrum defined at the upper level of the engineering bedrock via the one-dimensional wave propagation theory. The reliability and accuracy of the proposed analysis method is examined through the comparison with the results by the conventional method (represented by the program) for many simulated spectrum-compatible ground motions.     

三种土层结构反应谱平台值的统计分析

本文以建筑抗震设计规范规定的反应谱为目标谱,通过调整加速度峰值和特征周期来人工合成数百条加速度时程曲线,并将其作为土层地震反应分析的地震动输入。在若干有工程意义的场地剖面中,选取和构造了部分软弱土层分别在底部、中部和顶部的三种土层剖面,利用土层地震反应分析的一维等效线性化波动方法,计算了不同土层剖面在不同地震动输入下的地表加速度反应谱的平台值。在统计分析的基础上,给出了不同场地三种土层结构的反应谱平台值的平均值。通过与正常剖面的反应谱平台值比较,给出了三种土层结构的反应谱平台值的影响系数。本文的研究获得了一些有意义的成果。     

Seismic vulnerability estimation of the building considering seismic environment and local site condition

Introduction The estimation of damage probability distribution among different damage states of rein-forced concrete buildings is a key component of earthquake loss estimation for modern city or a group of cities. With the development of city, the reinforced concrete buildings are major compo-nent parts of modern cities. Vulnerability estimates for these kinds of buildings are of importance to those responsible for civil protection, relief, and emergency services to enable adequate contin-genc…