Depths to density discontinuities beneath the Adamawa Plateau region, Central Africa, from spectral analyses of new and existing gravity data

New gravity data from the Adamawa Uplift region of Cameroon have been integrated with existing gravity data from central and western Africa to examine variations in crustal structure throughout the region. The new data reveal steep northeast-trending gradients in the Bouguer gravity anomalies that coincide with the Sanaga Fault Zone and the Foumban Shear Zone, both part of the Central African Shear Zone lying between the Adamawa Plateau and the Congo Craton. Four major density discontinuities in the lithosphere have been determined within the lithosphere beneath the Adamawa Uplift in central Cameroon using spectral analysis of gravity data: (1) 7–13 km; (2) 19–25 km; (3) 30–37 km; and (4) 75–149 km. The deepest density discontinuities determined at 75–149 km depth range agree with the presence of an anomalous low velocity upper mantle structure at these depths deduced from earlier teleseismic delay time studies and gravity forward modelling. The 30–37 km depths agree with the Moho depth of 33 km obtained from a seismic refraction experiment in the region. The intermediate depth of 20 km obtained within region D may correspond to shallower Moho depth beneath parts of the Benue and Yola Rifts where seismic refraction data indicate a crustal thickness of 23 km. The 19–20 km depths and 8–12 km depths estimated in boxes encompassing the Adamawa Plateau and Cameroon Volcanic Line may may correspond to mid-crustal density contrasts associated with volcanic intrusions, as these depths are less than depths of 25 and 13 km, respectively, in the stable Congo Craton to the south.     

Moho depth determination beneath the Zagros Mountains from 3D inversion of gravity data

Due to its geological and economic importance, the Zagros Mountains have been investigated by many researchers during the last decades. Nevertheless, in spite of all the studies conducted on the region, there are still some controversial problems concerning the structure of the Zagros Mountains, including crustal depths, demanding more insights into understanding the crustal constraints of the region. Accordingly, we have conducted a gravity study to determine Moho depth map of the Zagros Mountains region, including its major structural domains from the coastal plain of the Persian Gulf to central Iran. The employed data are the densest and most accurate terrestrial gravity data set observed until now with the precision of 5 μGal and resolution of 5 arc-minute by 5 arc-minute. To image Moho depth variations, gravity inversion software GROWTH2.0 is used, proposing the possibility to model stratified structures by means of a semi-objective exploratory 3D inversion approach. The obtained results reveal the crustal thickness of ~?30–35 km underneath the southwestern most Zagros Fold-Thrust Belt increasing northeastward to 48 km. The maximum Moho depth is estimated ~?62 km below the Zagros Mountains belt along the Main Zagros Thrust. Northeast of the study area, an average crustal thickness of 46 km is computed beneath Urumieh–Dokhtar magmatic arc and central Iran.     

Three dimensional inversion of gravity data from the main ethiopian Rift

A three-dimensional interpretation of the newly compiled Bouguer anomaly map of the Main Ethiopian Rift is discussed. Then, the crustal thickness distribution beneath the Main Ethiopian Rift is confirmed using a — dimensional inverse approach to gravity data interpretation. The depths to the crust-upper mantle interface form the inversion parameters. Both approaches are constrained with the results of the seismic refraction experiments of the region. The degree of ambiguity of the final model parameters is then quantified.The Bouguer anomalies along the axial portion of the rift floor, as deduced from the results of the regional and residual separation, are mainly caused by deep-seated structures. The high resolution 3-D forward modeling reveals a possible crustal thickness and density distribution beneath the graben.The results of the inversion confirm a strong crustal attenuation zone (≤ 31 km) closely associated with the rifting of the graben and an abrupt fall of the Moho interface on either side of the rift (up to 51 km) related to the formation of the western and southeastern plateaus. However, no indication of crustal separation is observed.The ambiguity analysis reveals that greater ambiguity of the model parameters exists in the southeastern plateau. There, these model parameters represent the depths to the Moho interface where the seismic control is relatively less.     

Processing and interpretation of the gravity field of the East African Rift: implication for crustal extension

Compilation of new and existing gravity data were undertaken to assess the nature of the crust beneath the East African Rift System. Using 3D gravity modeling code crustal model of gravity profiles across two sectors of the rift were computed. The results are discussed in light of the structure of the rift system.The results of the 3D modeling of gravity profiles across the two rift zones revealed northward thinning of the crust. The maximum crustal attenuation occurs beneath the Afar depression, indicating the Afar rift undergoes an intense fragmentation of the crust resulting from faulting and magmatic activity. However, our computed crustal thickness below the Afar depression falls within an upper bound compared to elsewhere below tectonically active rift zones. This can be explained in terms of crustal accretion resulting from an impact of the Afar mantle plume since 30 Ma ago.The residual gravity obtained using high-cut filtering techniques reveals significant density contrast between the northern and southern sectors of the rift. The northern part of the rift is characterized by regular patterns of positive gravity anomalies, which can be interpreted in terms of a zone of crustal thinning through which relatively dense materials have intruded the overlying crust. In contrast, south of the Main Ethiopian Rift, the anomalies are characterized by random patterns and low amplitudes. The along-rift-axis variation in gravity anomalies implies that the style of crustal deformation changed progressively, beginning with regionally distributed crustal deformation, such as the one we observe within the more juvenile and wider southern segment of the rift, to localized deformation within the active and narrow rift zones of the northern sector of the Ethiopian Rift. We suggest that the key parameters controlling along-rift-axis variation in gravity anomalies are the rate of crustal extension, faulting and magmatic activities.     

南海重力异常特征及其显著的构造意义

在南海地区地震测深数据有限的情况下,利用重力异常可以研究南海大范围的深部地壳结构及地质构造展布特征。基于空间重力异常,结合最新的地形、沉积物厚度及地震测深等数据,分别从地震约束的莫霍面反演和无约束的三维相关成像两个视角研究南海的地壳结构,利用壳幔界面起伏、地壳厚度及三维等效密度分布来探讨地壳结构的纵横向变化。同时,联合采用延拓、水平梯度及线性构造增强滤波方法聚焦重力异常中的区域线性特征,突出显示了反映地壳横向变化的深断裂、洋陆转换边界、海盆扩张轴等线性构造的展布。重力解释与贯穿南海南北的广州-巴拉望地学断面对比表明,重力异常反演及异常的区域线性特征,较好地揭示了南海海域大范围的地壳结构与区域构造展布。     

Integrated 3D density modelling and segmentation of the Dead Sea Transform

A 3D interpretation of the newly compiled Bouguer anomaly in the area of the “Dead Sea Rift” is presented. A high-resolution 3D model constrained with the seismic results reveals the crustal thickness and density distribution beneath the Arava/Araba Valley (AV), the region between the Dead Sea and the Gulf of Aqaba/Elat. The Bouguer anomalies along the axial portion of the AV, as deduced from the modelling results, are mainly caused by deep-seated sedimentary basins (D > 10 km). An inferred zone of intrusion coincides with the maximum gravity anomaly on the eastern flank of the AV. The intrusion is displaced at different sectors along the NNW–SSE direction. The zone of maximum crustal thinning (depth 30 km) is attained in the western sector at the Mediterranean. The southeastern plateau, on the other hand, shows by far the largest crustal thickness of the region (38–42 km). Linked to the left lateral movement of approx. 105 km at the boundary between the African and Arabian plate, and constrained with recent seismic data, a small asymmetric topography of the Moho beneath the Dead Sea Transform (DST) was modelled. The thickness and density of the crust suggest that the AV is underlain by continental crust. The deep basins, the relatively large intrusion and the asymmetric topography of the Moho lead to the conclusion that a small-scale asthenospheric upwelling could be responsible for the thinning of the crust and subsequent creation of the Dead Sea basin during the left lateral movement. A clear segmentation along the strike of the DST was obtained by curvature analysis: the northern part in the neighbourhood of the Dead Sea is characterised by high curvature of the residual gravity field. Flexural rigidity calculations result in very low values of effective elastic lithospheric thickness (t _e < 5 km). This points to decoupling of crust in the Dead Sea area. In the central, AV the curvature is less pronounced and t _e increases to approximately 10 km. Curvature is high again in the southernmost part near the Aqaba region. Solutions of Euler deconvolution were visualised together with modelled density bodies and fit very well into the density model structures. An erratum to this article can be found at     

利用天然地震震相探讨阿尔金地区地壳结构

本文利用阿尔金地区的宽频地震数据,对布设在该区的１０个宽频地震台站用接收函数方法进行了速度结构反演,反演的初步结果发现,若至花土沟剖面在２０ｋｍ深度处有一条厚度达５～１０ｋｍ的低速带断续出现,莫霍界面呈台阶状展布,北部浅,南部深;塔里木盆地南缘的地壳厚度为４０～４２ｋｍ左右;在阿尔金南,北缘断裂两侧台站下方莫霍深度的错断约６．５～８ｋｍ,在柴达木盆地北缘,莫霍面的深度达５０ｋｍ以上,Ｓ波速为４．５     

Crustal density structure in the Spanish Central System derived from gravity data analysis (Central Spain)

Shallow and deep sources generate a gravity low in the central Iberian Peninsula. Long-wavelength shallow sources are two continental sedimentary basins, the Duero and the Tajo Basins, separated by a narrow mountainous chain called the Spanish Central System. To investigate the crustal density structure, a multitaper spectral analysis of gravity data was applied. To minimise biases due to misleading shallow and deep anomaly sources of similar wavelength, first an estimation of gravity anomaly due to Cenozoic sedimentary infill was made. Power spectral analysis indicates two crustal discontinuities at mean depths of 31.1 ± 3.6 and 11.6 ± 0.2 km, respectively. Comparisons with seismic data reveal that the shallow density discontinuity is related to the upper crust lower limit and the deeper source corresponds to the Moho discontinuity. A 3D-depth model for the Moho was obtained by inverse modelling of regional gravity anomalies in the Fourier domain. The Moho depth varies between a mean depth of 31 km and 34 km. Maximum depth is located in a NW–SE trough. Gravity modelling points to lateral density variations in the upper crust. The Central System structure is described as a crustal block uplifted by NE–SW reverse faults. The formation of the system involves displacement along an intracrustal detachment in the middle crust. This detachment would split into several high-angle reverse faults verging both NW and SE. The direction of transport is northwards, the detachment probably being rooted at the Moho.     

Topography of the crust–mantle boundary beneath the Black Sea Basin

A map of Moho depth for the Black Sea and its immediate surroundings has been inferred from 3-D gravity modelling, and crustal structure has been clarified. Beneath the basin centre, the thickness of the crystalline layer is similar to that of the oceanic crust. In the Western and Eastern Black Sea basins, the Moho shallows to 19 and 22 km, respectively. Below the Tuapse Trough (northeastern margin, adjacent to the Caucasus orogen), the base of the crust is at 28 km, whereas in the Sorokin Trough, it is as deep as 34 km. The base of the crust lies at 29 and 33 km depths respectively below the southern and northern parts of the Mid-Black Sea Ridge. For the Shatsky Ridge (between the Tuapse Trough and the Eastern Black Sea Basin), the Moho plunges from the northwest (33 km) to the southeast (40 km). The Arkhangelsky Ridge (south of the Eastern Black Sea Basin) is characterised by a Moho depth of 32 km. The crust beneath these ridges is of continental type.     

Crustal structure of the Kaapvaal craton and its significance for early crustal evolution

High-quality seismic data obtained from a dense broadband array near Kimberley, South Africa, exhibit crustal reverberations of remarkable clarity that provide well-resolved constraints on the structure of the lowermost crust and Moho. Receiver function analysis of Moho conversions and crustal multiples beneath the Kimberley array shows that the crust is 35 km thick with an average Poisson's ratio of 0.25. The density contrast across the Moho is 15%, indicating a crustal density about 2.86 gm/cc just above the Moho, appropriate for felsic to intermediate rock compositions. Analysis of waveform broadening of the crustal reverberation phases suggests that the Moho transition can be no more than 0.5 km thick and the total variation in crustal thickness over the 2400 km² footprint of the array no more than 1 km. Waveform and travel time analysis of a large earthquake triggered by deep gold mining operations (the Welkom mine event) some 200 km away from the array yield an average crustal thickness of 35 km along the propagation path between the Kimberley array and the event. P- and S-wave velocities for the lowermost crust are modeled to be 6.75 and 3.90 km/s, respectively, with uppermost mantle velocities of 8.2 and 4.79 km/s, respectively. Seismograms from the Welkom event exhibit theoretically predicted but rarely observed crustal reverberation phases that involve reflection or conversion at the Moho. Correlation between observed and synthetic waveforms and phase amplitudes of the Moho reverberations suggests that the crust along the propagation path between source and receiver is highly uniform in both thickness and average seismic velocity and that the Moho transition zone is everywhere less than about 2 km thick. While the extremely flat Moho, sharp transition zone and low crustal densities beneath the region of study may date from the time of crustal formation, a more geologically plausible interpretation involves extensive crustal melting and ductile flow during the major craton-wide Ventersdorp tectonomagmatic event near the end of Archean time.     

Structure of the crust and upper mantle beneath the central european rift system

The crustal structure of the central European rift system has been investigated by seismic methods with varying success. Only a few investigations deal with the upper-mantle structure. Beneath the Rhinegraben the Moho is elevated, with a minimum depth of 25 km. Below the flanks it is a first-order discontinuity, while within the graben it is replaced by a transition zone with the strongest velocity gradient at 20–22 km depth. An anomalously high velocity of up to 8.6 km/s seems to exist within the underlying upper mantle at 40–50 km depth. A similar structure is also found beneath the Limagnegraben and the young volcanic zones within the Massif Central of France, but the velocity within the upper mantle at 40–50 km depth seems to be slightly lower. Here, the total crustal thickness reaches only 25 km. The crystalline crust becomes extremely thin beneath the southern Rhônegraben, where the sediments reach a thickness of about 10 km while the Moho is found at 24 km depth. The pronounced crustal thinning does not continue along the entire graben system. North of the Rhinegraben in particular the typical graben structure is interrupted by the Rhenohercynian zone with a “normal” West-European crust of 30 km thickness evident beneath the north-trending Hessische Senke. A single-ended profile again indicates a graben-like crustal structure west of the Leinegraben north of the Rhenohercynian zone. No details are available for the North German Plain where the central European rift system disappears beneath a sedimentary sequence of more than 10 km thickness.     

长江中下游及邻区的地壳密度结构与深部成矿背景探讨——来自重力学的约束

长江中下游成矿带是我国最重要的矿产资源生产基地之一。为了深入理解和认识此成矿带形成的深部构造背景及其岩浆活动与成矿作用过程,本文利用NW-SE向利辛-宜兴地球物理探测剖面的重力场资料构建了跨越长江中下游成矿带地域的二维深部地壳密度结构模型。并在结合其他已有研究成果的基础上,从Moho界面的展布形态、密度分布特征与壳内低密度区的存在等方面探讨了该区的深部构造格局与成矿作用过程。研究结果表明:长江中下游成矿带地域下方的地壳密度结构与其两侧地域存在显著差异;在宁芜矿集区下方的Moho界面呈上隆形态,矿集区存在密度值略低于两侧地域的低密度异常区。幔源岩浆的上涌底侵与MASH成矿作用可较好地解释该区的结构与构造形态以及在地表所见到的岩浆广泛存在和矿产资源富集的特征。岩石圈地幔物质在宁芜矿集区下方的上涌导致了Moho界面的抬升,而脆性上地壳中的伸展断裂则为岩浆的向上运移与矿产资源的形成提供了有利场所与环境。     

南海南部地壳结构的重力模拟及伸展模式探讨

对南海南部地壳结构研究有助于揭示南海完整的演化历史。本研究对南海南部获取的两条多道地震剖面进行了地震 解释,并对重力数据进行了壳幔密度反演。其中 NH973-1 测线始于南海西南次海盆,覆盖了南沙中部的北段;NH973-2 测 线始于南海东部次海盆,穿越礼乐滩东侧。反演结果显示,莫霍面埋深在海盆区 10~11 km,陆缘区 15~21 km 左右,洋壳向 陆壳莫霍面深度迅速增加。海盆区厚度在 6~7 km,为典型的洋壳;陆缘区地壳厚度在 15~19 km,为减薄型地壳。进一步研 究表明(1)在西南次海盆残余扩张脊之下,莫霍面比两侧略深;(2)在礼乐滩外侧海盆区有高值重力异常体,推测为洋壳与深 部岩浆混合的块体;(3)南沙区域上地壳存在高密度带,且横向上岩性可能变化。南海南部陆缘未发现有下地壳高速层,有 比较一致的构造属性和拉张样式,为非火山型陆缘。我们对两条测线陆缘的伸展因子进行了计算,发现上地壳脆性拉伸因 子与全地壳拉伸因子存在差异,其陆缘的拉张模式在纵向上是不均匀一的。     

Lithospheric structure of the North China Craton: Integrated gravity,geoid and topography data

The lithospheric structure of ancient cratons provides important constraints on models relating to tectonic evolution and mantle dynamics. Here we present the 3D lithospheric structure of the North China Craton (NCC) from a joint inversion of gravity, geoid and topography data. The NCC records a prolonged history of Archean and Paleoproterozoic accretion of crustal blocks through subduction and collision building the cratonic architecture, which was subsequently differentially destroyed during Mesozoic through extensive magmatism. The thermal structure obtained in our study is considered to define the lithosphere-asthenosphere boundary (LAB) of the NCC, and reflects the density variations within the mantle lithosphere. Employing the Moho depths from deep seismic sounding profiles for the inversion, and based on repeated computations using different parameters, we estimate the Moho depth, LAB depth and average crustal density of the craton. The Moho depth varies from 28 to 50 km and the LAB depth varies from 105 to 205 km. The LAB and Moho show concordant thinning from West to East of the NCC. The average crustal density is 2870 kg m^− 3 in the western part of the NCC, higher than that in the eastern part (2750 kg m^− 3). The results of joint inversion in our study yielded LAB depth and lithospheric thinning features similar to those estimated from thermal and seismic studies, although our results show different depth and variations in the thickness. The lithosphere gently thins from 145 to 105 km in the eastern NCC, where as the thinning is much less pronounced in the western NCC with average depth of about 175 km. The joint inversion results in this study provide another perspective on the lithospheric structure from the density properties and corresponding geophysical responses in an ancient craton.     

长江中下游成矿带及邻区地壳速度结构：来自利辛-宜兴宽角地震资料的约束

为了理解长江中下游地区在中生代成矿的深部动力学过程,Sinoprobe-03-02项目于2011年9月至10月,在跨宁芜矿集区和郯庐断裂带实施了从安徽利辛至江苏宜兴450km长的宽角反射/折射地震剖面。速度剖面结果显示,Moho面深度和地壳速度结构在郯庐断裂两侧东西方向存在明显的差异:(1)在东部扬子块体内部,地壳覆盖层厚3~5km,西部的合肥盆地下方,则达到4~7km。(2)剖面平均Moho面深度为30~32km左右,在郯庐断裂下方,Moho面深度在35km左右;在宁芜矿集区下方,Moho面整体深度偏浅,达30~31km左右,但局部范围内,Moho面深度至34km左右。(3)剖面的下地壳平均速度在6.5~6.6km/s左右,在宁芜矿集区下方,下地壳速度偏低,为6.4~6.5km/s左右。剖面上地幔顶部的速度结构平均在8.0~8.2km/s。在宁芜矿集区下方,速度偏低,为7.9~8.1km/s左右。(4)郯庐断裂带的下方,从地表开始,还存在20多千米长的低速异常带,一直延伸到Moho面附近。剖面的宁芜矿集区下方Moho面上隆、下地壳及上地幔的低速异常等壳幔结构特征,预示下地壳不以榴辉岩残体为主,支持燕山期地幔岩浆的上涌和侵入并成矿,是热上涌物质的源地。     

Signature of the upper mantle density structure in the refined gravity data

The gravitational signal of the upper mantle density structures is investigated in the refined gravity data which are corrected for the gravitational contributions of the crust density structures and the Moho geometry. The gravimetric forward modeling is applied to compute these refined gravity data globally on a 1 × 1 arcdeg grid using the global geopotential model (EGM2008), the global topographic/bathymetric model (DTM2006.0) including the ice-thickness data, and the global crustal model (CRUST2.0). The characteristics of the upper mantle density structures are further analyzed in association with the Moho parameters (i.e., Moho depths and density contrast). The 1 × 1 arcdeg global data of the Moho parameters are estimated by applying the combined least-squares approach based on solving Moritz’s generalization of the Vening–Meinesz inverse problem of isostasy. The refined gravity data exhibit mainly the mantle lithosphere structures attributed to the global mantle convection. A significant correlation found over oceans between the refined gravity data and the Moho density contrast is explained by the increasing density of the oceanic lithosphere with age. Despite the lithosphere structures attributed to the global mantle convection are confirmed also in the refined gravity data over continents, the significant correlation between the refined gravity data and the Moho parameters is in this case absent. Instead, the significant proportion of lateral variations of the Moho density contrast within the continental lithosphere is attributed to the depth-dependant density changes due to pressure and thermal gradient.     

Crustal structure across southern Mexico inferred from gravity data

We present a gravity model of the crustal structure in southern Mexico based on interpretation of a detailed marine gravity profile perpendicularly across the Middle America Trench offshore from Acapulco, and a regional gravity transect extending into continental Mexico across the Sierra Madre del Sur, the central sector of the Trans-Mexican Volcanic Belt, the Sierra Madre Oriental, the Coastal Plain, and into the Gulf of Mexico. The elastic thickness of the Cocos lithospheric plate was found to be 30 km. In agreement with a previous seismic refraction study, no major differences in crustal structure were observed on both sides of the O’Gorman Fracture Zone. The gravity high seaward of the trench is interpreted as due to the incipient flexure and crustal thinning. The gravity low at the axis of the trench is explained by the increase in water depth and the existence of low-density accreted or continental-derived sediments (2.25 and 2.40 g/cm³). A gravity high of 50 mGal extending about 100 km landward is interpreted as caused by local shoaling of the Moho. The crust attains a thickness of 42 km under the Trans-Mexican Volcanic Belt but thins beneath the Coastal Plain and the continental slope of the Gulf of Mexico. Gravity highs around the Sierra de Tamaulipas are interpreted in terms of relief of the lower–upper crustal interface, implying a shallow basement.     

多玛-德庆-达孜断面壳幔密度结构特征

利用人机交互重震联合反演的方法研究了多玛-德庆-达孜断面的二维壳幔横向密度结构特征。模拟结果显示,剖面下的地壳内部大部分存在低速层,念青唐古拉山两侧的德庆、羊八井附近存在两条深大正断层,切割并抬升了其下的中地壳低密度层,低密度层整体被向上抬升5～10 km,使得念青唐古拉山深部表现为一个地垒构造。念青唐古拉山位于莫霍面由浅变深的缓坡上,向东逐渐变深。软流圈在念青唐古拉山下形状发生变化,表现为“上凸”特征。     

Deep structure, recent deformation and analog modeling of the Gulf of Cadiz accretionary wedge: Implications for the 1755 Lisbon earthquake

The Gulf of Cadiz spans the plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. A narrow east dipping subduction zone descends beneath the Gulf of Cadiz and the straits of Gibraltar. The deep crustal structure of the Gulf and the adjacent SW Iberian and Moroccan margins is constrained by numerous multi-channel seismic reflection and wide-angle seismic surveys. A compilation of these existing studies is presented in the form of depth to basement, sediment thickness, depth to Moho and crustal thickness maps. These structural maps image an E-W trending trough, with thin (< 10 km) crust beneath the Gulf of Cadiz. This trough is filled by an eastward thickening wedge of sediments, reaching a thickness of 10-15 km in the eastern Gulf. These sediments are tectonically deformed, primarily along a series of westward-vergent thrust faults and represent a 200-250 km wide accretionary wedge. The northern and especially the southern limits of the accretionary wedge are marked by sharp morphological lineaments showing evidence of recent deformation. These tectonic limits are situated in an internal position with respect to the Miocene deformation front (external Betic and Rif allocthons), which has been abandoned. At the western boundary of the accretionary wedge, near the adjacent Seine and Horseshoe abyssal plains, an E-W trending basement high (Coral Patch Ridge) can be seen indenting the deformation front in an asymmetric manner. Analog modeling is performed using granular materials accreted against a semicircular backstop (representing the basement of the Rif and Betic mountain belts). The modeling initially produces a symmetric, arcuate accretionary wedge. The ensuing collision of an oblique rigid indenter retards accretion on one side, resulting in an embayment and a locally steeper deformation front. The deformation pattern observed in morphology and high-resolution seismic profiles suggests the accretionary wedge and underlying subduction system is still active. The implications of active subduction for the source region of the 1755 Lisbon earthquake and the regional seismic hazard assessment are discussed.     

Crustal structure beneath the east side of Pearl River Estuary from onshore-offshore seismic experiment

ABSTRACT

The land-sea transition zone in the northern South China Sea (SCS) records important information from the continental rifting to the seafloor spreading. The crustal structure is the key to explore the deep tectonic environment and the evolution of the SCS. In 2015, the onshore-offshore 3D deep seismic experiment was carried out on the Pearl River Estuary (PRE). Explosions and air guns were used as sources on land and at sea respectively in this experiment.Onshore seismic stations and Ocean Bottom Seismographs (OBSs) synchronously recorded the seismic signals. We focus on an onshore-offshore seismic profile (L2, SE-trending) along the eastern side of the PRE. By modelling the seismic travel times, we constructed a P-wave velocity model along the profile. The model shows that the sediment on land is thin and has seismic velocities of 4.5–5.5 km/s. In contrast, thickness of the offshore sediment gradually increases to more than 4.0 km, and the velocities vary between 2.0 km/s and 4.5 km/s. The onshore and offshore crustal velocities are 5.8–6.8 km/s and 5.5–6.8 km/s, respectively. At depth between 15 km and 20 km, a low-velocity layer (LVL; only 5.9 km/s) is detected, pinching out under the Littoral Fault Zone (LFZ). The LVL has probably accommodated the crustal extension beneath the land area, resulting in low extent of the crustal thinning. A slightly uplifted Moho exists beneath the Dongguan fault depression zone, representing a place where hot mantle materials ascend. Localized thickening of the sediments and rapid thinning of the crust characterize the LFZ, and it can be regarded as a tectonic boundary between the South China (SC) with normal continental crust and the northern SCS margin with extended continental crust.