共查询到19条相似文献,搜索用时 406 毫秒
1.
三维矿产资源评价软件MICROMINE在金属矿山资源储量估算中的应用——以吉林舒兰季德钼矿为例 总被引:1,自引:0,他引:1
描述了吉林舒兰季德钼矿的矿床地质特征、水文地质、工程地质、环境地质条件及选矿试验结果。以该钼矿为例,系统讨论了三维矿产资源评价软件MICROMINE 11.03版的工作原理及流程,并对该矿床进行了资源量估算和验证。采用距离反比加权法进行资源储量估算,获得矿石量31374.14万t,钼金属量245096t,其中,111b+122b矿石量占总矿石储量的80.99%,钼金属量占总资源储量的81.08%;露天开采设计利用资源储量占总矿石储量的91.64%,钼金属量占总资源储量的91.99%。地质块段法和三角网多边形估算法检验结果表明,用三维矿产资源评价软件MICROMINE中距离反比加权法进行资源量估算,方法合理,相对误差较小,结果可靠。 相似文献
2.
3.
4.
基于探矿者软件(Minexplorer)的三维地质建模及储量估算——以湘西北李梅铅锌矿为例 总被引:1,自引:0,他引:1
在全面收集地质资料的基础上,利用探矿者软件建立了湘西北李梅铅锌矿区的综合地质数据库,利用三维钻孔数据建立了研究区的三维矿床模型,并以矿体模型和地层模型为例,介绍了矿区三维地质建模的一般流程。在矿体模型的基础上,利用地质块段法、地质截面法、地质统计学方法进行了储量估算,并与矿山勘探报告中的储量估算结果进行了对比。研究结果表明,利用探矿者软件进行三维建模和储量估算,操作简便、可视化效果好,不同方法进行储量估算的结果互相印证,真实可靠。 相似文献
5.
在全面收集地质资料的基础上,利用探矿者软件建立了湘西北李梅铅锌矿区的综合地质数据库,利用三维钻孔数据建立了研究区的三维矿床模型,并以矿体模型和地层模型为例,介绍了矿区三维地质建模的一般流程。在矿体模型的基础上,利用地质块段法、地质截面法、地质统计学方法进行了储量估算,并与矿山勘探报告中的储量估算结果进行了对比。研究结果表明,利用探矿者软件进行三维建模和储量估算,操作简便、可视化效果好,不同方法进行储量估算的结果互相印证,真实可靠。 相似文献
6.
7.
8.
MICROMINE软件包括8个模块。其中有一个储量估算模块,利用这个模块中的距离幂次反比加权法,对龙市泉水洞铁矿进行储量估算。使用MICROMINE软件对40条具有工业意义的矿体进行圈定与资源储量估算,估算出矿石量14 404 kt,矿床平均品位21.77%。 相似文献
9.
基于模拟退火遗传算法矿床勘探3DEM储量估算 总被引:1,自引:0,他引:1
矿床勘探3DEM储量估算是以三维可视化技术为核心,将我国传统的储量估算方法与计算机信息技术结合起来的储量估算工作流程。通过单工程矿体可视化圈定技术,能够保证矿体边界的合理性;通过剖面矿体连接技术,可以得到地质常用的剖面成果图件,同时为三维可视化提供断面数据;通过断面数据模拟退火遗传算法,能较好地解决复杂地质体的断面连接,组成三维地质体。以三雏矿体为限定条件,开展地质块段法或克里格地质统计学储量估算,并利用三维技术实现储量科学管理。 相似文献
10.
杨赤中滤波与推估法是一种对矿床地质变量统计的新方法。为使这一新理论用于勘探网规则或不规则情况下及在矿体小而勘探抽样点比较少,产状复杂的铀矿体的储量估算,我们用此法对2个矿床的5个矿体进行了储量估算,取得了较满意的效果。实践证明,杨赤中滤波与推估法与传统的块段法比较,具有公式简明、使用方便、易掌握、计算速度快、结果准确,花费少、经济效益好等优点。本文主要介绍了此种方法实际应用的步骤,应用的体会以及效果的初步评价。 相似文献
11.
12.
论华南喷流—沉积块状硫化物矿床 总被引:29,自引:1,他引:29
现代海底喷流-沉积硫化物矿床的发现极大地推动了海底热液成矿理论的发展,也大大地提高了对古代海底喷流块充化物矿术的研究水平。本文指出喷流-沉积是重要的成矿作用,提出喷流-沉积矿床是华南Cu、Pb、Zn、Sn、Ag、Au等矿产资源的重要来源,形成了一批超大型矿床,并将华南许多曾被认为属夕卡岩矿床重新确认为喷流-沉积岩床。文章还论述了华南喷流-沉积块状硫化物矿床的特征、分类、时空分布及其成矿特点等问题,提出断裂拗陷带型喷流-沉积块状硫化物矿床是华南具有特色的类型,而陆相断陷盆地中喷流-沉积矿床值得进一步深入研究。 相似文献
13.
古代与现代海底黑矿型块状硫化物矿床矿石地球化学比较研究 总被引:33,自引:1,他引:33
选择西南太平洋冲绳海槽现代海底烟囱硫化物矿床、日本小坂矿山上向黑矿(第三纪)和中国西南呷村黑矿型矿床(三叠纪)进行了矿石地球化学比较研究。黑矿型矿床矿石吨位-品位模式与其他火山成因块状硫化物(VMS)矿床类似,矿田(20-50km^2)矿石吨位与单个喷气-沉积型(Sedex)矿床相当,金属总量4-6Mt,为矿田范围内热液流体搬运的最大金属量。与洋脊环境VMS矿床相比,岛弧裂谷环境产出的黑矿型矿床相 相似文献
14.
The Bent Hill massive sulfide deposit and ODP Mound deposit in Middle Valley at the northernmost end of the Juan de Fuca Ridge are two of the largest modern seafloor hydrothermal deposits yet explored. Trace metal concentrations of sulfide minerals, determined by laser-ablation ICP-MS, were used in conjunction with mineral paragenetic studies and thermodynamic calculations to deduce the history of fluid-mineral reactions during sulfide deposition. Detailed analyses of the distribution of metals in sulfides indicate significant shifts in the physical and chemical conditions responsible for the trace element variability observed in these sulfide deposits. Trace elements (Mn, Co, Ni, As, Se, Ag, Cd, Sb, Pb, and Bi) analyzed in a representative suite of 10 thin sections from these deposits suggest differences in conditions and processes of hydrothermal alteration resulting in mass transfer of metals from the center of the deposits to the margins. Enrichments of some trace metals (Pb, Sb, Cd, Ag) in sphalerite at the margins of the deposits are best explained by dissolution/reprecipitation processes consistent with secondary remineralization. Results of reaction-path models clarify mechanisms of mass transfer during remineralization of sulfide deposits due to mixing of hydrothermal fluids with seawater. Model results are consistent with patterns of observed mineral paragenesis and help to identify conditions (pH, redox, temperature) that may be responsible for variations in trace metal concentrations in primary and secondary minerals. Differences in trace metal distributions throughout a single deposit and between nearby deposits at Middle Valley can be linked to the history of metal mobilization within this active hydrothermal system that may have broad implications for sulfide ore formation in other sedimented and unsedimented ridge systems. 相似文献
15.
Lawrence M. Cathles 《Mineralium Deposita》2011,46(5-6):639-657
Episodic seafloor spreading, ridge topography, and fault movement at ridges find (more extreme) analogs in the arc and back-arc setting where the volcanogenic massive sulfide (VMS) deposits that we mine today were formed. The factors affecting sulfide accumulation efficiency and the extent to which sulfides are concentrated spatially are the same in both settings, however. The processes occurring at mid-ocean ridges therefore provide a useful insight into those producing VMS deposits in arcs and back-arcs. The critical observation investigated here is that all the heat introduced by seafloor spreading at mid-ocean ridges is carried out of the crust within a few hundred meters of the ridge axis by ??350°C hydrothermal fluids. The high-temperature ridge hydrothermal systems are tied to the presence of magma at the ridge axis and greatly reduce the size and control the shape of axial magma intrusions. The amount of heat introduced to each square kilometer of ocean crust during its formation can be calculated, and its removal by high-temperature convection allows calculation of the total base metal endowment of the ocean basins. Using reasonable metal deposition efficiencies, we conclude that the ocean floor is a giant VMS district with metal resources >600 times the total known VMS reserves on land and a copper resource which would last >6,000?years at current production rates. 相似文献
16.
四川呷村V HMS矿床:从野外观察到成矿模型 总被引:11,自引:11,他引:11
呷村矿床是一个与晚三叠世海相钙碱性酸性火山岩系有关的典型块状硫化物(VHMS)矿床。热水流体系统和贱金属成矿作用发育于义敦岛弧碰撞造山带上的弧间裂谷盆地内,并受其内部的一系列局限盆地及SN向基底断裂-裂缝系统控制。含矿岩系为双峰岩石组合,具火山碎屑岩-矿体-喷气岩“三位一体”特征。硫化物矿床具有“块状矿席+层控网脉状矿带”式三维结构特征。块状矿席发育多旋回的硫化物-硫酸盐韵律型式,揭示热水流体在海底的幕式排泄以及硫化物-硫酸盐在卤水池内的韵律式化学淀积和滑塌堆积过程。层控网脉状矿带产出于流纹质火山岩系,与上覆的块状矿席平行展布,揭示高渗透性碎屑岩层和多条同级别断层或断裂共同约束海底下部热水流体,并诱导其“弥散式”排泄和侧向流动交代。热水流体的传导冷凝过程导致硫化物沉积、热水流体与冷海水的简单混合导致硅质岩或/重晶石淀积,传导冷凝与海水混合的联合作用导致含硫化物重晶石、硅质岩和红碧玉形成。 相似文献
17.
Robert R. Seal II Robert A. Ayuso Nora K. Foley Sandra H. B. Clark 《Mineralium Deposita》2001,36(2):137-148
The Barite Hill gold deposit, at the southwestern end of the Carolina slate belt in the southeastern United States, is one
of four gold deposits in the region that have a combined yield of 110 metric tons of gold over the past 10 years. At Barite
Hill, production has dominantly come from oxidized ores. Sulfur isotope data from hypogene portions of the Barite Hill gold
deposit vary systematically with pyrite–barite associations and provide insights into both the pre-metamorphic Late Proterozoic
hydrothermal and the Paleozoic regional metamorphic histories of the deposit. The δ34S values of massive barite cluster tightly between 25.0 and 28.0‰, which closely match the published values for Late Proterozoic
seawater and thus support a seafloor hydrothermal origin. The δ34S values of massive sulfide range from 1.0 to 5.3‰ and fall within the range of values observed for modern and ancient seafloor
hydrothermal sulfide deposits. In contrast, δ34S values for finer-grained, intergrown pyrite (5.1–6.8‰) and barite (21.0–23.9‰) are higher and lower than their massive counterparts,
respectively. Calculated sulfur isotope temperatures for the latter barite–pyrite pairs (Δ=15.9–17.1‰) range from 332–355 °C
and probably reflect post-depositional equilibration at greenschist-facies regional metamorphic conditions. Thus, pyrite and
barite occurring separately from one another provide pre-metamorphic information about the hydrothermal origin of the deposit,
whereas pyrite and barite occurring together equilibrated to record the metamorphic conditions. Preliminary fluid inclusion
data from sphalerite are consistent with a modified seawater source for the mineralizing fluids, but data from quartz and
barite may reflect later metamorphic and (or) more recent meteoric water input. Lead isotope values from pyrites range for
206Pb/204Pb from 18.005–18.294, for 207Pb/204Pb from 15.567–15.645, and for 208Pb/204Pb from 37.555–38.015. The data indicate derivation of the ore leads from the country rocks, which themselves show evidence
for contributions from relatively unradiogenic, mantle-like lead, and more evolved or crustal lead. Geological relationships,
and stable and radiogenic isotopic data, suggest that the Barite Hill gold deposit formed on the Late Proterozoic seafloor
through exhalative hydrothermal processes similar to those that were responsible for the massive sulfide deposits of the Kuroko
district, Japan. On the basis of similarities with other gold-rich massive sulfide deposits and modern seafloor hydrothermal
systems, the gold at Barite Hill was probably introduced as an integral part of the formation of the massive sulfide deposit.
Received: 17 August 1998 / Accepted: 12 October 2000 相似文献
18.
阿尔泰是中亚成矿域重要的内生金属矿产集中区,该矿集区晚古生代发育有 5类内生摘金属要矿床:1)块状硫化物Cu-Pb-Zn矿床,2)斑岩型Cu-Au矿床,3)岩浆 Cu-Ni硫化物矿床,4)矽卡岩型Cu-Mo-Fe矿床,5)造山型金矿床和伟晶岩型稀有金属矿床。在构造上,这些矿床的形成与阿尔泰造山带俯冲—增生作用密切相关。阿尔泰晚古生代矿床的形成可以划分为3个主要阶段:Ⅰ)早-中泥盆世,沿阿尔泰南缘古生代活动大陆边缘弧后伸展,导致在阿尔泰西部琼库尔—塔拉特地质体中形成的多金属火山成因块状硫化物矿床,以及阿尔泰东段铁—铜矽卡岩矿床;Ⅱ)石炭纪—二叠纪的地体增生和弧岩浆作用,在布尔津—二台和额尔齐斯地体中形成了广泛分布的斑岩型矿床、岩浆铜镍硫化物矿床,在额尔齐斯地体中形成的铜铁矽卡岩矿床;Ⅲ)早二叠世的持续增生导致阿尔泰南部的杜拉特岛弧形成,并伴随有矽卡岩铜钼矿床和造山型金矿的形成;晚二叠世阿尔泰地区进入造山带演化阶段,并发生区域动力热流变质作用和片麻岩穹隆,伴随有花岗岩化和重熔岩浆活动和大量伟晶岩矿床的形成。晚古生代阿尔泰南缘的俯冲—增生构造演化过程,导致了不同类型内生金属矿床的形成,构成了我国重要的内生金属矿集区和矿山后备基地。 相似文献
19.
阿尔泰是中亚成矿域重要的内生金属矿产集中区,该矿集区晚古生代发育有 5类内生摘金属要矿床:1)块状硫化物Cu-Pb-Zn矿床,2)斑岩型Cu-Au矿床,3)岩浆 Cu-Ni硫化物矿床,4)矽卡岩型Cu-Mo-Fe矿床,5)造山型金矿床和伟晶岩型稀有金属矿床。在构造上,这些矿床的形成与阿尔泰造山带俯冲—增生作用密切相关。阿尔泰晚古生代矿床的形成可以划分为3个主要阶段:Ⅰ)早-中泥盆世,沿阿尔泰南缘古生代活动大陆边缘弧后伸展,导致在阿尔泰西部琼库尔—塔拉特地质体中形成的多金属火山成因块状硫化物矿床,以及阿尔泰东段铁—铜矽卡岩矿床;Ⅱ)石炭纪—二叠纪的地体增生和弧岩浆作用,在布尔津—二台和额尔齐斯地体中形成了广泛分布的斑岩型矿床、岩浆铜镍硫化物矿床,在额尔齐斯地体中形成的铜铁矽卡岩矿床;Ⅲ)早二叠世的持续增生导致阿尔泰南部的杜拉特岛弧形成,并伴随有矽卡岩铜钼矿床和造山型金矿的形成;晚二叠世阿尔泰地区进入造山带演化阶段,并发生区域动力热流变质作用和片麻岩穹隆,伴随有花岗岩化和重熔岩浆活动和大量伟晶岩矿床的形成。晚古生代阿尔泰南缘的俯冲—增生构造演化过程,导致了不同类型内生金属矿床的形成,构成了我国重要的内生金属矿集区和矿山后备基地。 相似文献