安徽六安井下地震计与地表地震计观测质量对比

将安徽六安2015年安装的2台GL-S60B井下地震计记录数据,分别与在各自井口架设的BBVS-60地表地震计记录数据进行对比,得到了噪声有效值、频谱特征和有效动态范围等,初步获得了井下地震计在六安的运行情况.研究表明,井下地震计观测效果明显优于地面地震计,这对于未来地震台站选址、仪器选型等具有参考意义.     

绥芬河基准站井下地震计观测性能分析

绥芬河基准站是黑龙江省地震烈度速报与预警工程新建基准站,配备GL-CS60B型井下地震计进行地震观测,为验证该地震计观测性能,以GL-CS60型地表地震计作为参考,进行方位角检验和标定计算,并对比分析2套地震计台基背景噪声水平,结果发现：井下地震计各项参数达到标准,其中方位角为164.349°。井下地震计抗干扰能力较强,尤其对于1—20 Hz频段的人为干扰压制作用明显,其台基背景噪声水平达Ⅰ级,观测数据质量更佳。     

沉积层地震观测噪声的对比试验

天津地区的地质构造条件复杂,其中大部分地区被新生代沉积物深度覆盖,地势以平原和洼地为主,北部有少量低山丘陵,平原约占93％.因此,天津市测震台网地震观测台站除蓟县台有基岩出露台外,其余台站均为井下地震观测.而井下地震计维修价格昂贵且不易维修,同时还面临着由于井下电缆损毁,地震计无法回收等问题.为此,天津市测震台网一直在寻找一种可替代现有井下观测的新方式,以应对深覆盖层地震观测存在的问题.本文通过地震观测,完成了一地多台基情况下台基噪声的对比试验,得到了很好的对比结果.该方法适合在其它类似天津这样沉积层较厚的地区推广使用,可达到简化地震计安装、降低设备维护成本和方便维护的目的.     

赵县地震台地表及深井地震计观测数据对比分析

由于城市化进程加快,人为干扰因素逐渐增多,地震观测数据质量受到严重的影响。通过对赵县地震台地表及深井地震计记录的数据进行幅频、功率谱分析,并对比二者的地震监测能力等,分析发现:与地面观测相比,深井地震计在避免噪声及提高地震监测能力范围方面具有更大优势,观测数据精度能提高1—2个数量级。通过总结分析地表及深井地震计记录的优缺点,为测震台网今后的发展方向提供依据。     

地震计灵敏度的对比测量法

本文提出一种地震计灵敏度的对比测量法, 该方法将被测地震计和一台校准过的地震计比邻、 平行摆放, 共同记录地振动数据, 通过对比分析两台地震计的输出信号, 计算被测地震计的灵敏度。 与振动台测量法相比, 该方法成本低, 与电测法相比, 不需已知地震计的标定常数, 是一种简单易行、 精度高的地震计灵敏度测量方法。     

连云港地震台BBVS-120、CTS-1E型地震计系统性能对比

通过对连云港地震台BBVS-120、CTS-1E型地震计台基噪声功率谱分析,正弦标定和脉冲标定计算分析,近震和远震震级对比分析,研究在实际工作中2种地震计性能差异,对比观测数据质量,检验稳定性,以期为地震监测及相关研究工作提供依据.     

连云港地震台BBVS-120、CTS-1E型地震计系统性能对比

通过对连云港地震台BBVS-120、CTS-1E型地震计台基噪声功率谱分析,正弦标定和脉冲标定计算分析,近震和远震震级对比分析,研究在实际工作中2种地震计性能差异,对比观测数据质量,检验稳定性,以期为地震监测及相关研究工作提供依据。     

乌加河地震台、乌力吉地震台台基噪声特征对比分析

利用2020年5月1—7日乌加河地震台、乌力吉地震台波形数据,应用噪声功率谱概率密度(PDF)方法,计算2个台站的台基噪声,分析了2种观察环境下的台基噪声特征及影响因素。结果显示,在小于0.1 Hz频段乌力吉地震台台基噪声值明显大于乌加河地震台,说明地震计在小于0.1 Hz 频段受环境温度影响的特征较显著;在大于1 Hz频段2个台站台基噪声值均有台阶性升高频段,这是由在该频段台基噪声受人为活动影响所致。     

地震计低自噪声测量及参数建模

本文提出一种基于对比法测定地震计相对传感参数,并考虑分向对齐误差计算地震计自噪声,再利用连续3天以上的自噪声数据提取获得地震计低噪声数据的方法。通过理论分析和实际数据计算检验表明,采用这一套方法提取地震计的低噪声数据,对数据选择的要求大大降低,有利于客观、稳定地获取地震计的自噪声数据。此外,通过参数建模,获得地震计自噪声曲线的拟合多项式,直接计算自噪声参考频点数值,可以避免在实际曲线上读数时受到的计算误差引起的波动影响,得到客观、稳定、可靠的地震计自噪声参数数据,有利于地震计性能比较评价。最后作为实例,给出了采用本文算法计算出的4种国产地震计的自噪声模型及低自噪声参数。     

江苏省部分地震台站CMG-3TB地震计监测能力对比分析

选取了溧阳台、南通台和盐城台作为研究样本,以清晰可辨震相的记录幅值与脉动记录幅值的比值为标准,根据近震震级公式,用量规函数反推单台控制距离,分别计算出三台的监测能力,同时使用绘制地震震中分布图方法对计算出的理论监测能力结果进行了验证,更科学地反映CMG-3TB井下地震计的性能。     

Development of design flood hydrographs using probability density functions

Probability density functions (PDFs) are used to fit the shape of hydrographs and have been popularly used for the development of synthetic unit hydrographs by many hydrologists. Nevertheless, modelling the shapes of continuous stream flow hydrographs, which are probabilistic in nature, is rare. In the present study, a novel approach was followed to model the shape of stream flow hydrographs using PDF and subsequently to develop design flood hydrographs for various return periods. Four continuous PDFs, namely, two parameter Beta, Weibull, Gamma and Lognormal, were employed to fit the shape of the hydrographs of 22 years at a site of Brahmani River in eastern India. The shapes of the observed and PDF fitted hydrographs were compared and root mean square errors, error of peak discharge (EQ_P) and error of time to peak (ET_P) were computed. The best‐fitted shape and scale parameters of all PDFs were subjected to frequency analysis and the quartiles corresponding to 20‐, 50‐, 100‐ and 200‐year were estimated. The estimated parameters of each return period were used to develop the flood hydrographs for 20‐, 50‐, 100‐ and 200‐year return periods. The peak discharges of the developed design flood hydrographs were compared with the design discharges estimated from the frequency analysis of 22 years of annual peak discharges at that site. Lognormal‐produced peak discharge was very close to the estimated design discharge in case of 20‐year flood hydrograph. On the other hand, peak discharge obtained using the Weibull PDF had close agreement with the estimated design discharge obtained from frequency analysis in case of 50‐, 100‐ and 200‐year return periods. The ranking of the PDFs based on estimation of peak of design flood hydrograph for 50‐, 100‐ and 200‐year return periods was found to have the following order: Weibull > Beta > Lognormal > Gamma. Copyright © 2009 John Wiley & Sons, Ltd.     

Derivation of bivariate probability density functions with exponential marginals

A vivariate probability density function (pdf),f(x ₁,x ₂), admissible for two random variables (X ₁,X ₂), is of the form

反馈网络对地震计性能的影响

通过对地震计数学模型的详细分析，阐明了不同形式的反馈网络在地震计中的不同作用，结果表明：①机械部分对反馈式地震计频率特性的影响在一定条件下可以忽略。②地震计的类型和通频带由反馈网络决定。③反馈扩大地震计的动态范围，降低了地震计的分辨率。④反馈系统对地震计的信噪比没有影响。     

基于概率密度演化的基础隔震结构随机响应分析

针对抗震结构和基础隔震结构,应用概率密度演化方法对其进行多遇地震作用下的线性随机响应分析.通过引入工程地震动物理随机函数模型,采用数论选点法对多维外荷载随机变量进行离散代表点的生成并求得其赋得概率,利用离散代表点合成地震动加速度时程样本作为输入结构的随机激励,对于每条地震波,相当于对结构进行确定性动力反应分析.在求得结...     

Uncertainty propagation of arbitrary probability density functions applied to upscaling of transmissivities

In many fields of study, and certainly in hydrogeology, uncertainty propagation is a recurring subject. Usually, parametrized probability density functions (PDFs) are used to represent data uncertainty, which limits their use to particular distributions. Often, this problem is solved by Monte Carlo simulation, with the disadvantage that one needs a large number of calculations to achieve reliable results. In this paper, a method is proposed based on a piecewise linear approximation of PDFs. The uncertainty propagation with these discretized PDFs is distribution independent. The method is applied to the upscaling of transmissivity data, and carried out in two steps: the vertical upscaling of conductivity values from borehole data to aquifer scale, and the spatial interpolation of the transmissivities. The results of this first step are complete PDFs of the transmissivities at borehole locations reflecting the uncertainties of the conductivities and the layer thicknesses. The second step results in a spatially distributed transmissivity field with a complete PDF at every grid cell. We argue that the proposed method is applicable to a wide range of uncertainty propagation problems.     

基于概率密度演化的隔震结构随机地震响应

本文考虑地震动的随机性,运用概率密度演化方法对基础隔震结构的随机响应进行研究.上部结构与隔震层分别采用刚度退化的Bouc-Wen模型与Bouc-Wen模型,建立隔震结构的概率密度演化方程,直接应用四阶龙格-库塔方法迭代求解隔震结构的非线性的响应,得出隔震结构在8度罕遇地震下每层的位移概率.结果显示隔震结构较非隔震结构上部结构的位移大大地减小了,上部结构具有足够的安全性.结构整个概率密度演化过程显示了隔震结构的响应信息,概率密度演化方法能够有效评估隔震结构的抗震性能.     

Translating CFC-based piston ages into probability density functions of ground-water age in karst

Temporal age distributions are equivalent to probability density functions (PDFs) of transit time. The type and shape of a PDF provides important information related to ground-water mixing at the well or spring and the complex nature of flow networks in karst aquifers. Chlorofluorocarbon (CFC) concentrations measured for samples from 12 locations in the karstic Madison aquifer were used to evaluate the suitability of various PDF types for this aquifer. Parameters of PDFs could not be estimated within acceptable confidence intervals for any of the individual sites. Therefore, metrics derived from CFC-based apparent ages were used to evaluate results of PDF modeling in a more general approach. The ranges of these metrics were established as criteria against which families of PDFs could be evaluated for their applicability to different parts of the aquifer. Seven PDF types, including five unimodal and two bimodal models, were evaluated. Model results indicate that unimodal models may be applicable to areas close to conduits that have younger piston (i.e., apparent) ages and that bimodal models probably are applicable to areas farther from conduits that have older piston ages. The two components of a bimodal PDF are interpreted as representing conduit and diffuse flow, and transit times of as much as two decades may separate these PDF components. Areas near conduits may be dominated by conduit flow, whereas areas farther from conduits having bimodal distributions probably have good hydraulic connection to both diffuse and conduit flow.     

基于下一代性能设计理论的全概率抗震性能评估

对建筑物灾变发生时经济损失和人员伤亡情况做出准确预估是未来建筑结构设计初期需要努力的方向。基于下一代性能化设计理论,通过精细化建模和动力时程分析对结构进行易损性分析,并以此得到抗震性能评估所需的各类地震响应参数,建立RC框架结构全概率抗震性能评估方法。以云南大学力行楼为例,通过地震损失预测得到了该栋建筑的经济损失、修复时间和人员伤亡情况。该方法直观清晰地展示了结果,便于业主及非本专业从业者理解。