On the Measurement of the Tensile Strength of Soft Rocks

Summary. This paper reports on a comparative study of various types of experimental tests for measuring the tensile strength of rocks and rock-like materials. A critical assessment is presented of some widely used laboratory techniques on the basis of experimental data from the literature and from the laboratory investigation performed in this study.Tests were carried out using a triaxial apparatus recently set up at Milan University of Technology. This was designed to reduce random misalignments between specimen and loading frame, which are typical of conventional triaxial cells with external tie bars. The apparatus was then modified to perform various types of tests for determining the tensile strength of materials. An artificial building stone and a natural calcarenite of the Gravina di Puglia geological formation, sampled at Montescaglioso (Matera-Italy) were tested in this research. The experimental investigation included various types of tests, namely the uni-axial, the Brazilian, the ring, the three and four points bending and the Luong test. Specimens of both materials were also compressed to failure in unconfined conditions and loaded cyclically in unconfined tension and compression, Young’s moduli being measured by means of local instrumentation.     

Investigating the Effect of Cyclic Loading on the Indirect Tensile Strength of Rocks

This paper presents the results of laboratory experiments during the investigation of the stress–strain characteristics of Brisbane tuff disc specimens under diametral compressive cyclic loading. Two different cyclic loading methods were used: namely, sinusoidal cyclic loading and cyclic loading with increasing mean level. The first method applied the S–N curve approach to the indirect tensile strength (ITS) of rock specimens for the first time in the literature, and the second method investigated the effect of increasing cyclic loading on the ITS of rock specimens. The ITS of Brisbane tuff disc specimens was measured using the Brazilian tensile strength test. The reduction in ITS was found to be 33% with sinusoidal loading tests, whereas increasing cyclic loading caused a maximum reduction of 37%. It is believed that the fracturing under cyclic loading starts at contact points between strong grains and weak matrices, and that contact points at grain boundaries are the regions of stress concentration (i.e., indenters). Transgranular cracks emanate from these regions and intergranular cracks sometimes pass through the contact points. Once cracking begins, there is a steady progression of damage and a general ‘loosening’ of the rock, which is a precursor to the formation of intergranular cracks.     

Experimental and Numerical Studies on Determination of Indirect Tensile Strength of Rocks

Indirect tension tests using Brisbane tuff Brazilian disc specimens under standard Brazilian jaws and various loading arcs were performed. The standard Brazilian indirect tensile tests caused catastrophic, crushing failure of the disc specimens, rather than the expected tensile splitting failure initiated by a central crack. This led to an investigation of the fracturing of Brazilian disc specimens and the existing indirect tensile Brazilian test using steel loading arcs with different angles. The results showed that the ultimate failure load increased with increasing loading arc angles. With no international standard for determining indirect tensile strength of rocks under diametral load, numerical modelling and analytical solutions were undertaken. Numerical simulations using RFPA^2D software were conducted with a heterogeneous material model. The results predicted tensile stress in the discs and visually reproduced the progressive fracture process. It was concluded that standard Brazilian jaws cause catastrophic, crushing failure of the disc specimens instead of producing a central splitting crack. The experimental and numerical results showed that 20° and 30° loading arcs result in diametral splitting fractures starting at the disc centre. Moreover, intrinsic material properties (e.g. fracture toughness) may be used to propose the best loading configuration to determine the indirect tensile strength of rocks. Here, by using numerical outcomes and empirical relationships between fracture toughness and tensile strength, the best loading geometry to obtain the most accurate indirect tensile strength of rocks was the 2α?=?30° loading arc.     

Evaluation of Indirect Tensile Strength of Track Ballast Using Weibull Statistics

Iraq is planning to expand and rehabilitate its current railway network, thus demanding huge amounts of proper ballast material. There are three common quarries in Iraq, Sinjaar in the northern sector, Al-Qaim in western desert and Najaf-sea in the middle and southern parts of Iraq. The selection of proper track ballast material is of prime importance in design and construction of railway projects. The single particle-crushing test is a simple indirect tensile test that provides useful data for the selection of the material. Two types of railway ballast materials from (Najaf-sea and Al-Qaim) quarries are commonly used in the construction of railway in Iraq. The single particle-crushing test was performed for various ballast sizes, and the obtained data were analyzed using Weibull analysis. Najaf-sea crushed stones indicate higher tensile strength for all particle sizes compared to corresponding particle sizes of Al-Qaim crushed stone. In addition, an inverse linear relationship had obtained, between tensile strength and particle size with R ² (0.837 and 0.979) for Al-Qaim and Najaf-sea crushed stone, respectively, such relationships are important in evaluating the suitability of the materials in terms of the survival probability     

人工冻土单轴抗拉,抗压强度的试验研究

简述了国内外冻土单轴抗拉、抗压强度的试验方法，分别在３个不同温度下（－７℃、－１２℃、－１７℃）进行了单轴抗拉、抗压强度测定。试验表明，采用劈裂法测定冻上抗拉强度是可行的。试验的结论对冻土工程的设计与施工有一定参考作用。     

圆环试样内径对抗拉强度的影响

运用RFPA2D软件对岩石的单轴拉伸强度试验、不同内径的圆环试样的劈裂试验进行了模拟。比较模拟结果 ,重点研究了圆环试样内径对试件抗拉强度的影响 ,确定了最接近单轴拉伸试验结果内径的范围 ,利用回归分析确定了内径与试样抗拉强度之间的关系。     

Prediction of Uniaxial Compressive Strength,Tensile Strength and Porosity of Sedimentary Rocks Using Sound Level Produced During Rotary Drilling

The main purpose of the study is to develop a general prediction model and to investigate the relationships between sound level produced during drilling and physical properties such as uniaxial compressive strength, tensile strength and percentage porosity of sedimentary rocks. The results were evaluated using the multiple regression analysis taking into account the interaction effects of various predictor variables. Predictor variables selected for the multiple regression model are drill bit diameter, drill bit speed, penetration rate and equivalent sound level produced during rotary drilling (L _eq). The constructed models were checked using various prediction performance indices. Consequently, it is possible to say that the constructed models can be used for practical purposes.     

Determination of Fracture Toughness of Anisotropic Rocks by Boundary Element Method

Summary  This paper presents a systematic procedure for determining fracture toughness of an anisotropic marble using the diametral compression test (Brazilian test) with a central crack on the discs. Additionally, a novel formulation to increase the accuracy in Stress Intensity Factor (SIF) calculations using Boundary Element Method (BEM) is applied to determine the stress intensity factors and the fracture toughness of anisotropic rocks under mixed-mode loading. The numerical results show that the SIFs for both isotropic and anisotropic problems are in good agreement with those reported by previous authors. The marble with clear white-black foliation from Hualien (in eastern Taiwan), was selected for the Brazilian tests. Diametral loading was conducted on the Cracked Straight Through Brazilian Disc (CSTBD) specimens to evaluate their fracture toughness. In addition, a new fracture criterion was developed to predict pure mode I, pure mode II or mixed mode (I–II) fracture toughness of the anisotropic marble. The new fracture criterion is based on the examination of mode I, mode II and mixed mode (I–II) fracture toughness for different crack angles and anisotropic orientation. Authors’ address: Associate Professor Chao-Shi Chen, Department of Resources Engineering, National Cheng Kung University, No. 1 Dasyue Rd., East District, Tainan 701, Taiwan     

Indirect Measurement of Suction

This paper reports on indirect soil suction measurement methods. Indirect suction measurement techniques measure the moisture equilibrium condition of the soil instead of suction. The moisture equilibrium condition of the soil can be determined by primary means as in vapor pressure, secondary means as through another porous medium or tertiary means as in measuring other physical properties of the porous medium that indicates its moisture equilibrium condition. Indirect suction measurement techniques employing primary means include thermocouple psychrometers, transistor psychrometer and chilled-mirror psychrometer. Indirect suction measurement techniques employing secondary means includes the filter paper method and indirect suction measurement techniques employing tertiary means include thermal conductivity sensors and electrical conductivity sensors. These techniques have been widely used in engineering practice and in research laboratories. However, each of these techniques has its own limitations and capabilities, and active research into improving these techniques is ongoing in universities, research laboratories, and private sector. This paper outlines working principles, calibration, measurement, and application areas of these methods based on recent literature and practice.     

冻结黄土抗拉强度的试验研究

冻结饱水黄土的拉伸试验表明，拉伸破坏均属脆性破坏类型，拉断面上矿物颗粒剪移错粒，裂隙发育。拉伸的应力－应变过程，视荷载作用的快慢大致可分为粘弹－塑性、粘－弹性有脆性破坏三类，它们可用统一的方程形式加以描述，此外，对饱水冻结黄土的峰值应力、破坏应变和破坏时间等特性进行了分析，对抗拉、抗压强度作分析比较后指出，它们的比值为０．４４－０．６３，与负温和加载速率的关系不大。     

A Discrete Element Model for Predicting Shear Strength and Degradation of Rock Joint by Using Compressive and Tensile Test Data

A discrete element model is proposed to examine rock strength and failure. The model is implemented by UDEC, which is developed for this purpose. The material is represented as a collection of irregular-sized deformable particles interacting at their cohesive boundaries. The interface between two adjacent particles is viewed as a flexible contact whose constitutive law controls the material fracture and fragmentation properties. To reproduce rock anisotropy, an orthotropic cohesive law is developed for the contacts, which allows their shear and tensile behaviors to be different from each other. Using a combination of original closed-form expressions and statistical calibrations, a unique set of the contact microparameters are found based on the uniaxial/triaxial compression and Brazilian tension test data of a plaster. Applying the obtained microparameters, joint specimens, made of the same plaster, are simulated, where the comparison of the obtained results to laboratory data shows a reasonable agreement.     

A Study on the Peak Strength of Brittle Rocks

Summary A study on the peak strength of brittle rock materials having random strength distributions was carried out using the re-normalization group theory approach. A major advantage of the approach is that it is scale invariant, and therefore, one can relate the micro-fractures with macro-fractures of rocks at the critical state. The stress transfer from the broken sub-sections to the unbroken sub-sections is defined by a conditional probability. The critical probability P ^* and the relation between the peak strength and the mean strength of the elements have been obtained theoretically. On the other hand, the whole process of rock brittle fracture has also been simulated numerically from micro-fracture to macro-fracture by using the Rock Failure Process Analysis (RFPA) code. The peak strengths obtained by the numerical model agree fairly well with those obtained by the re-normalisation group theory. Due to the stress transfer from the broken subsections to the unbroken subsections, the peak strength is considerably less than the mean strength of the elements. Received October 24, 2000; accepted February 26, 2002 Published online September 2, 2002     

Tensile Strength of Cement-Treated Champlain Sea Clay

Geotechnical and Geological Engineering - Champlain Sea clay, a sensitive marine clay, is commonly found along the Saint Lawrence River basin in Eastern Canada. According to recent studies, cement...