Taiwan Oscillation Network

The Taiwan Oscillation Network (TON) is a ground-based network to measure solar intensity oscillations to study the internal structure of the Sun. K-line full-disk images of 1000 pixels diameter are taken at a rate of one image per minute. Such data would provide information onp-modes withl as high as 1000. The TON will consist of six identical telescope systems at proper longitudes around the world. Three telescope systems have been installed at Teide Observatory (Tenerife), Huairou Solar Observing Station (near Beijing), and Big Bear Solar Observatory (California). The telescopes at these three sites have been taking data simultaneously since October of 1994. Anl – v diagram derived from 512 images is included to show the quality of the data.     

Comments on the next generation of ground-based solar telescopes

The development of telescope capabilities tends to go in spurts. These are triggered by the availability of new techniques in optics, mechanics and/or instrumentation. So has nighttime telescope technology developed since the construction in the nineteen-forties of the 5-m Hale telescope, first by the introduction in the sixties of high efficiency electronic detectors, followed recently by the production of large 8- to 10-m mirrors and now by the implementation of adaptive optics. In solar astronomy, major steps were the introduction of the coronagraph by Lyot in the nineteen-thirties and the vacuum telescope concept by Dunn in the sixties. In the last thirty years, telescope developments in solar astronomy have relied primarily on improved instrumental capabilities. As in nighttime astronomy, these instruments and their detectors are reaching their limits set by the quantum nature of light and the telescope diffraction. Larger telescopes are needed to increase sensitivity and angular resolution of the observations. In this paper, I will review recent efforts to increase substantially the telescope capabilities themselves. I will emphasize the concept of a large all-wavelength, coronagraphic telescope (CLEAR) which is presently being developed.Dedicated to Cornelis de Jager     

History of solar telescopes

Solar observations have been done with telescopes since their invention—already Galileo looked at the Sun. Despite the Sun’s unusual brightness, telescopes which specialize in solar observations are fairly recent, dating from the late nineteenth century onwards. Today, many solar telescopes have rather little in common with nighttime telescopes. They are adapted to high light flux, a limited range of declination, and to the specifications of solar spectrographs and polarimeters. This paper presents the history of the modern optical solar telescope on the ground and in space, the accompanying evolution of scientific capabilities, and a brief outlook into the future.     

JPEG2000 Image Compression on Solar EUV Images

For future solar missions as well as ground-based telescopes, efficient ways to return and process data have become increasingly important. Solar Orbiter, which is the next ESA/NASA mission to explore the Sun and the heliosphere, is a deep-space mission, which implies a limited telemetry rate that makes efficient onboard data compression a necessity to achieve the mission science goals. Missions like the Solar Dynamics Observatory (SDO) and future ground-based telescopes such as the Daniel K. Inouye Solar Telescope, on the other hand, face the challenge of making petabyte-sized solar data archives accessible to the solar community. New image compression standards address these challenges by implementing efficient and flexible compression algorithms that can be tailored to user requirements. We analyse solar images from the Atmospheric Imaging Assembly (AIA) instrument onboard SDO to study the effect of lossy JPEG2000 (from the Joint Photographic Experts Group 2000) image compression at different bitrates. To assess the quality of compressed images, we use the mean structural similarity (MSSIM) index as well as the widely used peak signal-to-noise ratio (PSNR) as metrics and compare the two in the context of solar EUV images. In addition, we perform tests to validate the scientific use of the lossily compressed images by analysing examples of an on-disc and off-limb coronal-loop oscillation time-series observed by AIA/SDO.     

Automatic guiding of the primary image of solar Gregory telescopes

The primary image reflected from the field stop of solar Gregory telescopes is used for automatic guiding. This new system avoids temporal varying influences from the bending of the telescope tube by the main mirror's gravity and from offsets between the telescope and a separate guiding refractor. The required stiffness of the guider mechanics and the small areas of the sensors demand small f numbers for the guider optics, which cause problems with the image quality and with heat. Problems also arise from the pinhole in the telescope's field stop which is imaged as a dark dot on the sensor. Pointing errors introduced by the telescope affect shifts of the solar image on the sensor. These are numerically determined by Fourier methods which are found to be less sensitive to noise than profile centering methods. Several types of guiders are tested, the final equipment, now installed at the Gregory telescopes at Tenerife and at Locarno, is described.     

Mechanical design of the solar telescope GREGOR

The mechanical structure of the GREGOR telescope was installed at the Observatorio del Teide, Tenerife, in 2004. New concepts for mounting and cooling of the 1.5‐meter primary mirror were introduced. GREGOR is an open telescope, therefore the dome is completely open during observations to allow for air flushing through the open, but stiff telescope structure. Backside cooling system of the primary mirror keeps the mirror surface close to ambient temperature to prevent mirror seeing. The large collecting area of the primary mirror results in high energy density at the field stop at the prime focus of the primary which needs to be removed. The optical elements are supported by precision alignment systems and should provide a stable solar image at the optical lab. The coudé train can be evacuated and serves as a natural barrier between the outer environmental conditions and the air‐conditioned optical laboratory with its sensitive scientific instrumentation. The telescope was successfully commissioned and will start its nominal operation during 2013 (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

New vacuum solar telescope and observations with high resolution

The New Vacuum Solar Telescope(NVST) is a one meter vacuum solar telescope that aims to observe fine structures on the Sun. The main goals of NVST are high resolution imaging and spectral observations, including measurements of the solar magnetic field. NVST is the primary ground-based facility used by the Chinese solar research community in this solar cycle. It is located by Fuxian Lake in southwest China, where the seeing is good enough to perform high resolution observations. We first introduce the general conditions at the Fuxian Solar Observatory and the primary science cases of NVST. Then, the basic structures of this telescope and instruments are described in detail. Finally, some typical high resolution data of the solar photosphere and chromosphere are also shown.     

Correcting for the solar wind in pulsar timing observations: the role of simultaneous and low-frequency observations

The primary goal of pulsar timing array projects is to detect ultra-low-frequency gravitational waves. Pulsar data sets are affected by numerous noise processes including varying dispersive delays in the interstellar medium and from the solar wind. The solar wind can lead to rapidly changing variations that, with existing telescopes, can be hard to measure and then remove. In this paper we study the possibility of using a low frequency telescope to aid in such correction for the Parkes Pulsar Timing Array(PPTA) and also discuss whether the ultra-wide-bandwidth receiver for the FAST telescope is sufficient to model solar wind variations. Our key result is that a single wide-bandwidth receiver can be used to model and remove the effect of the solar wind. However, for pulsars that pass close to the Sun such as PSR J1022+1022, the solar wind is so variable that observations at two telescopes separated by a day are insufficient to correct the solar wind effect.     

A High-Resolution Solar Telescope Using Dark-Lens Diffractive Optics

A telescope based upon dark-lens diffractive optics would be a uniquely new instrument for solar astronomy. The image formation process in such a telescope gives an intrinsically higher resolving power and a greatly reduced image intensity compared to that of refracting or reflecting optical systems of similar lens dimension. This low image intensity would be an advantage for solar observations made using a very large imaging element. After a brief overview of the history of solar instrument development, a quantitative evaluation of the dark-lens diffracting solar telescope concept is presented, showing the potential of this imaging method to meet or even to exceed the most demanding resolution goals currently being considered for future space-borne solar telescopes.     

History of X-ray telescopes and astronomy

The development of X-ray telescopes over the last 45 years is briefly summarized. The first applications to the study of solar X-ray emission are described up to the 1973 Skylab mission. The rather convoluted path that led to the first stellar X-ray orbiting telescope Einstein (1978) and later to Chandra (1999) are discussed. During this 45 years period the angular resolution improved from 20 to 0.5 arc sec and the sensitivity by ten billions. X-ray observations have discovered new types of stellar systems (binary X-ray sources containing neutron stars and black holes) and intergalactic high temperature plasmas containing most of the baryonic mass of the universe. They have become an indispensable tool to study the role of energetic phenomena in the creation and dynamic evolution of cosmic structures. The methodology introduced by X-ray astronomy has influenced all of astronomy.     

Thermal characteristics of a classical solar telescope primary mirror

We present a detailed thermal and structural analysis of a 2 m class solar telescope mirror which is subjected to a varying heat load at an observatory site. A 3-dimensional heat transfer model of the mirror takes into account the heating caused by a smooth and gradual increase of the solar flux during the day-time observations and cooling resulting from the exponentially decaying ambient temperature at night. The thermal and structural response of two competing materials for optical telescopes, namely Silicon Carbide – best known for excellent heat conductivity and Zerodur – preferred for its extremely low coefficient of thermal expansion, is investigated in detail. The insight gained from these simulations will provide a valuable input for devising an efficient and stable thermal control system for the primary mirror.     

Observations of Solar EUV Radiation with the CORONAS-F/SPIRIT and SOHO/EIT Instruments

The SPIRIT complex onboard the CORONAS-F satellite has routinely imaged the Sun in the 171, 175, 195, 284, and 304 Å spectral bands since August 2001. The complex incorporates two telescopes. The Ritchey-Chretien telescope operates in the 171, 195, 284, and 304 Å bands and has an objective similar to that of the SOHO/EIT instrument. The Herschel telescope obtains solar images synchronously in the 175 and 304 Å bands with two multilayer-coated parabolic mirrors. The SPIRIT program includes synoptic observations, studies of the dynamics of various structures on the solar disk and in the corona up to 5 solar radii, and coordinated observations with other spaceborne and ground-based telescopes. In particular, in the period 2002–2003, synoptic observations with the SPIRIT Ritchey-Chretien telescope were coordinated with regular 6-hour SOHO/EIT observations. Since June 2003, when EIT data were temporarily absent (SOHO keyholes), the SPIRIT telescope has performed synoptic observations at a wavelength of 175 A. These data were used by the Solar Influence Data Analysis Center (SIDC) at the Royal Observatory of Belgium for an early space weather forecast. We analyze the photometric and spectral parameters of the SPIRIT and EIT instruments and compare the integrated (over the solar disk) EUV fluxes using solar images obtained with these instruments during the CORONAS-F flight from August 2001 through December 2003.     

Installation of solar chromospheric telescope at the Indian Astronomical Observatory,Merak

We report the observations of the solar chromosphere from a newly commissioned solar telescope at the incursion site near Pangong Tso lake in Merak (Leh/Ladakh). This new \(\hbox {H}_{\alpha }\) telescope at the Merak site is identical to the Kodaikanal \(\hbox {H}_{\alpha }\) telescope. The telescope was installed in the month of August 2017 at the Merak site. The telescope consists of a 20-cm doublet lens with additional re-imaging optics. A Lyot filter with 0.5 Å passband isolates the Balmer line of the hydrogen spectra to make the observations of the solar chromosphere. The observations made in \(\hbox {H}_{\alpha }\) wavelength delineates the magnetic field directions at the sunspot and the quiet regions. A CCD detector records the images of the chromosphere with a pixel resolution of 0.27\(^{\prime \prime }\) and covers 9.2\(^{\prime }\) field-of-view. This telescope has a good guiding system that keeps the FoV in the intended position. We report the development of control software for tuning the filter unit, control detector system, observations and calibration of the data to make it useful for the scientific community. Some preliminary results obtained from the Merak \(\hbox {H}_{\alpha }\) telescope are also presented. This high altitude facility is a timely addition to regularly obtain \(\hbox {H}_{\alpha }\) images around the globe.     

Toward high spatial resolution in solar observations

To achieve high spatial resolution capability for IR solar observations, we suggest the use of a special mask placed before the entrance aperture of large conventional optical telescopes. Such a mask would match well the resolution of a non-redundant array and would provide safe operation of a large telescope used for solar observations. The proposed solution has the additional advantage of relatively low cost because already-existing optical telescopes are used.     

LOFAR: The potential for solar and space weather studies

The Low Frequency array (LOFAR) will be a next generation digital aperture synthesis radio telescope covering the frequency range from 10 to 240 MHz. The instrument will feature full polarisation and multi-beaming capability, and is currently in its design phase. This work highlights the solar, heliospheric and space weather applications where LOFAR, with its unique and unprecedented capabilities, can provide useful information inaccessible by any other means. The relevant aspects of the LOFAR baseline design are described, and the most promising techniques of interest are enumerated. These include tracking coronal mass ejections (CMEs) out to large distances using interplanetary scintillation (IPS) methods, tomographic reconstruction of the solar wind in the inner heliosphere using IPS, direct imaging of the radio emission from CMEs and finally possible Faraday rotation studies of the magnetic field structure of the heliosphere and the CMEs. This work is a part of an effort directed towards ensuring the compatibility of LOFAR design with solar and space weather applications, in collaboration with the wider community.     

RATAN-600 radio telescope in the 24th solar-activity cycle. II. Multi-octave spectral and polarization high-resolution solar research system

Radio astronomy studies of the solar atmosphere possess a very important, not duplicated by other methods, place in the study of solar activity at all stages—from the birth of an active region until its collapse. A significant progress in these studies can be achieved in the implementation of new technical possibilities, such as an increase in the sensitivity of radio telescopes, a detailed spectral analysis over a wide frequency range, high temporal resolution and a broad coverage range in time. We report about the implementation of regular observations with a new spectral and polarization high-resolution system SPHRS, installed at the radio telescope RATAN-600.We describe the concept of the new system and the methods of its implementation.     

Giant magnetospheres in our solar system: Jupiter and Saturn compared

We review the current knowledge about the two biggest magnetospheres in our solar system based on the significant progress made with data from the Cassini spacecraft in orbit around Saturn since 2004, and based on the last mission to Jupiter by the Galileo spacecraft between 1995 and 2003. In addition we take into account new observations of the Hubble Space Telescope and other telescopes as well as the latest computer simulation efforts.     

I S L A An Astronomical World Space Observatory for The First Century of the 3 rd Millenium

ISLA will be an astronomical observatory, operating at the upper limit of our planet Earth atmosphere, offering space like observing conditions in most aspects. ISLA can be maintained easily, modified easily if necessary, always kept at the state of the art and operated for very extended periods without polluting the stratosphere. ISLA is ideally suited to become the first world space observatory as the observing conditions are very much space-like – diffraction limited angular resolution, very low ambient temperature, remote control – however ISLA is easily accessible, telescopes and instruments can be continuously improved and ISLA's costs corresponds only to those of ground-based modern astronomical installations like the ESO-VLT-, KECK- and GEMINI-observatories. The cost of observing and experimenting on ISLA will be orders of magnitudes lower than those of building and operating any space telescope, allowing the astronomers of developing nations to participate in the ISLA observatory within their limited financial possibilities as competent and full partners. ISLA's 4-m and 2-m telescopes will operate diffraction limited from 0.3 μm in the optical, over the infrared, far-infrared to the sub-mm spectral range. ISLA's individual telescopes will permit imaging with 20 milli-arcsec spatial resolution in the optical, 5 times better than the Hubble Space Telescope. ISLA's telescopes can be combined to form an interferometer with a maximum baseline of 250 m with nearly complete coverage of the u,v plane. Interferometric resolution will be of the order of 20 micro-arcsec for the optical. ISLA will thus offer spatial resolution comparable or better than the intercontinental VLBI radio interferometers. ISLA's telescope efficiency will be many orders of magnitude better than comparable ground-based telescopes. The light collecting power of ISLA's interferometric telescopes will be orders of magnitudes greater than the future space interferometers under discussion. ISLA, being an aviation project and not a space project, can be realised in the typical time scale for the development of aviation: about 5 years. ISLA's cost for the whole observatory, including its movable ground station etc. will be of the order of a typical medium size ESA space mission. ISLA's lifetime will be in excess of many decades, as it can easily be maintained, modernised, repaired and improved. ISLA will become the origin of a new astronomical international organisation with worldwide participation. ISLA's telescopes will be of the greatest importance to all astronomical fields, as it will permit to study much fainter, much more distant objects with microscopic spatial resolution in wavelength regions inaccessible from ground. ISLA's many telescopes permit easily simultaneous observations at many wavelengths for rapidly varying objects, from continuously monitoring the surfaces of the planets in our solar system, surfaces of close-by stars, nuclei of galaxies to QSO's. This revised version was published online in July 2006 with corrections to the Cover Date.     

A quantitative treatment of solar ‘seeing’, I

Measurements of temperature-fluctuation statistics in a locally homogeneous, isotropic turbulent atmosphere above level land are shown to enable the quality of telescopic images of celestial objects to be calculated. Data obtained with captive-balloon-borne apparatus are used, together with other existing data, to calculate the modulation transfer function and Strehl Definition for both long- and short-exposure images formed by typical solar telescopes operating under a variety of meteorological conditions. The size of telescope may thus be matched to the expected atmospheric conditions; the improvement in performance and utilization of the instrument, obtainable by raising it on a tower, may be calculated. An 11-cm aperture telescope, for example, is shown to be atmosphere-limited for long exposures in average daytime conditions; raising it from 2 to 30 m above the ground makes an almost threefold improvement in definition. If observations are confined to intervals of good seeing the full resolution of such a telescope may be realized. The existence of such intervals is attributed to convective thermal structure in the atmosphere and observational statistics of periods of below-average temperature fluctuation are given for a range of general meteorological conditions.     

A quantitative treatment of solar ‘seeing’, II

A previously described microthermal measurement technique is applied to diagnose the causes and locations of sources of harmful ‘seeing’ effects in solar telescopes. Examples of the investigation of a compact 30-cm refractor at Culgoora Observatory and the massive 60-in. McMath reflector at Kitt Peak Observatory are described. The separate contributions from various parts of the telescopes and their immediate environments to the overall modulation transfer function and to the rms wavefront deformation are determined. The effectiveness of ventilation equipment fitted to these telescopes is assessed. In particular, it is shown that rms wavefront deformations ranging from λ/8 to 2λ may originate within the immediate atmospheric environments of these telescopes. Since the locations of these disturbances are determined there is a possibility of effecting improvements for example by mounting a telescope adequately high above the floor of its supporting tower. In the McMath reflector the major contribution to bad ‘seeing’ generally arises in the upper part of the instrument in the vicinity of the heliostat.