Relay zone evolution: a history of repeated fault propagation and linkage,central Corinth rift,Greece

Established models indicate that, before being breached, relay zones along rift borders can evolve either by lengthening and rotating during progressive overlap of growing fault segments (isolated fault model), or, by simply rotating without lengthening before breaching (coherent fault model). The spatio‐temporal distribution of vertical motions in a relay zone can thus be used to distinguish fault growth mechanisms. Depositional relay zones that develop at sea level and accommodate both deposition on the ramp itself as well as transfer of sediments from the uplifting footwall into the hangingwall depocentres and provide the most complete record of vertical motions. We examine the development of a depositional relay ramp on the border of the active Corinth rift, Greece to reconstruct fault interaction in time and space using both onshore and offshore (2D seismic lines) data. The Akrata relay zone developed over a period of ca. 0.5 Myr since the Middle Pleistocene between the newly forming East Helike Fault (EHF) that propagated towards the older, more established Derveni Fault (DF). The relay zone captured the Krathis River, which deposited prograding Gilbert‐type deltas on the sub‐horizontal ramp. Successive oblique faults record progressive linkage and basinward migration of accommodation along the ramp axis, whereas marine terraces record diachronous uplift in their footwalls. Although early linkage of the relay zone occurs, continuous propagation and linkage of the EHF onto the static DF is recorded before final beaching. Rotation on forced folds above the upward and laterally propagating normal faults at the borders of the relay zone represents the ramp hinges. The Akrata relay zone cannot be compared directly to a simple fault growth model because (1) the relay zone connects two fault segments of different generations; (2) multiple linkages during propagation was facilitated by the presence of pre‐existing crustal structures, inherited from the Hellenide fold and thrust belt. The linkage of the EHF to the DF contributed to the westward and northward propagation of the southern rift border.     

Growth‐faults from delta collapse – structural and sedimentological investigation of the Last Chance delta,Ferron Sandstone,Utah

Investigations of syn‐sedimentary growth faults in the Last Chance delta (Ferron Sandstone, Utah, USA) show that fault‐bounded half‐grabens arrested high amounts of sand in the mouth bar and/or distributary channel areas. Fault‐controlled morphology causes changes in routing of the delta top to delta front drainage towards the long axis of half‐grabens. Faulting was spatially and temporally non‐systematic, and polyphase, with 3D cusp/listric fault geometries instigated by linkage of variously oriented segments. Hanging wall rollover folds consisting of wedge‐shaped syn‐kinematic sand attest to rapid <1‐m slip increments on faults followed by mild erosion along crests of fault blocks and sedimentary infill of adjacent accommodation. Triangle‐zones in prodelta to delta front muds are located underneath steeper faults and interconnected rotated fault‐flats. Their geometry is that of antiformal stack duplexes, in an arrangement of low‐angle‐to‐bedding normal faults at the base, replaced by folded thrusts upwards. These faults show a brittle, frictional flow deformation mechanism ascribed to early compaction of mud. For syn‐kinematic sand, there is a change from general granular/hydroplastic flow in shear zones to later brittle failure and cataclasis, a transition instigated by precipitation of calcite cement. Extensional faulting in the Last Chance delta was likely controlled by gravity driven collapse towards the delta slope and prodelta, as is commonly observed in collapsing deltas. The trigger and driving mechanism is envisioned as localized loads from sand deposited within distributary channels/mouth bars and fault‐controlled basins along the delta top. A regional tilt and especially displacement of compacted mud below sand bodies towards less compacted muds also contributed to the faulting.     

Extensional fault and fold growth: Impact on accommodation evolution and sedimentary infill

Extensional faults and folds exert a fundamental control on the location, thickness and partitioning of sedimentary deposits on rift basins. The connection between the mode of extensional fault reactivation, resulting fault shape and extensional fold growth is well‐established. The impact of folding on accommodation evolution and growth package architecture, however, has received little attention; particularly the role‐played by fault‐perpendicular (transverse) folding. We study a multiphase rift basin with km‐scale fault displacements using a large high‐quality 3D seismic data set from the Fingerdjupet Subbasin in the southwestern Barents Sea. We link growth package architecture to timing and mode of fault reactivation. Dip linkage of deep and shallow fault segments resulted in ramp‐flat‐ramp fault geometry, above which fault‐parallel fault‐bend folds developed. The folds limited the accommodation near their causal faults, leading to deposition within a fault‐bend synclinal growth basin further into the hangingwall. Continued fold growth led to truncation of strata near the crest of the fault‐bend anticline before shortcut faulting bypassed the ramp‐flat‐ramp structure and ended folding. Accommodation along the fault‐parallel axis is controlled by the transverse folds, the location and size of which depends on the degree of linkage in the fault network and the accumulated displacement on causal faults. We construct transverse fold trajectories by tracing transverse fold hinges through space and time to highlight the positions of maximum and minimum accommodation and potential sediment entry points to hangingwall growth basins. The length and shape of the constructed trajectories relate to the displacement on their parent faults, duration of fault activity, timing of transverse basin infill, fault linkage and strain localization. We emphasize that the considerable wavelength, amplitudes and potential periclinal geometry of extensional folds make them viable targets for CO₂ storage or hydrocarbon exploration in rift basins.     

Normal fault evolution and coupled landscape response: examples from the Southern Apennines,Italy

We present new data addressing the evolution, activity and geomorphic impact of three normal faults in the Southern Apennines: the Vallo di Diano, East Agri and Monti della Maddalena faults. We show that these faults have minimum total throws of ca. 1000–2000 m, and throw rates of ca. 0.7–1 mm year⁻¹ for at least the last ca. 18 ka. We demonstrate that for the Vallo di Diano and East Agri faults, the landscape is effectively recording tectonics, with relief, channel and catchment slopes varying along fault strike in the same manner as normal fault activity does, with little apparent influence of lithology. We therefore use these data to reconstruct the time‐integrated history of fault interaction and growth. From the distribution of knickpoints on the footwall channels, we infer two episodes of base level change, which we attribute to fault interaction episodes. We reconstruct the amount of throw accumulated after each of these events, and the segments involved in each, from the fault throw profiles, and use fault interaction theory to estimate the magnitude of the perturbations and past throw rates. We estimate that fault linkage events took place 0.7 ± 0.2 Ma and 1.4 ± 0.3 Ma in the Vallo di Diano fault, and 1 ± 0.1 in the East Agri Fault, and that both faults likely started their activity between 3 and 3.5 Ma. These fault linkage scenarios are consistent with the observed knickpoint heights. This method for reconstructing fault evolution could potentially be applied for any normal faults for which there is information about throw and throw rates, and in which channels are transiently responding to tectonics.     

Relay ramp evolution and mass flow deposition (Upper Kimmeridgian–Lower Volgian) in the Tail End Graben, Danish North Sea

The Central Graben in the Danish North Sea sector consists of a series of N–S to NW–SE trending, eastward‐tilted half‐grabens, bound to the east by the Coffee Soil Fault zone. This fault zone has a complex Jurassic history that encompasses at least two fault populations; N–S to NNW–SSE striking faults active in the Late Aalenian–Early Oxfordian, and NNW–SSE to WNW–ESE striking faults forming in Late Kimmeridgian time (sensu gallico), following a short period of tectonic quiescence. Sediment transport across the Coffee Soil Fault zone was controlled by fault array evolution, and in particular the development of relay ramps that formed potential entry points for antecedent drainage systems from the Ringkøbing–Fyn High east of the rift. Fault and isochore trends of the Upper Kimmeridgian–Lower Volgian succession in the northeast Danish Central Graben show that accommodation space was initially generated close to several minor, isolated or overlapping faults. Subsidence became focused along a few master faults in the Early Volgian through progressive linkage of selected faults. Seismic time isochore geometries, seismic facies, amplitude trends and well ties indicate the presence of coarse clastic lithologies locally along the fault zone. The deposits probably represent submarine mass flow deposits supplied from footwall degradation and possibly also from the graben hinterland via a relay ramp. The latter source appears to have been cut off as the relay ramp was breached and the footwall block are uplifted. Fault growth and linkage processes thus controlled the spatial and temporal trends of accommodation space generation and sediment supply to the rift basin.     

Along‐strike structural linkage and interaction in an active thrust fault system: A case study from the western Sichuan foreland basin,China

Along‐strike structural linkage and interaction between faults is common in various compressional settings worldwide. Understanding the kinematic history of fault interaction processes can provide important constraints on the geometry and evolution of the lateral growth of segmented faults in the fold‐and‐thrust belts, which are important to seismic hazard assessment and hydrocarbon trap development. In this study, we study lateral structural geometry (fault displacement and horizon shortening) of thrust fault linkages and interactions along the Qiongxi anticline in the western Sichuan foreland basin, China, using a high‐resolution 3D seismic reflection dataset. Seismic interpretation suggests that the Qiongxi anticline can be related to three west‐dipping, hard‐linked thrust fault segments that sole onto a regional shallow detachment. Results reveal that the lateral linkage of fault segments limited their development, affecting the along‐strike fault displacement distributions. A deficit between shortening and displacement is observed to increase in linkage zones where complex structural processes occur, such as fault surface bifurcation and secondary faulting, demonstrating the effect of fault linkage process on structural deformation within a thrust array. The distribution of the geometrical characteristics shows that thrust fault development in the area can be described by both the isolated fault model and the coherent fault model. Our measurements show that new fault surfaces bifurcate from the main thrust ramp, which influences both strain distribution in the relay zone and along‐strike fault slip distribution. This work fully describes the geometric and kinematic characteristics of lateral thrust fault linkage, and may provide insights into seismic interpretation strategies in other complex fault transfer zones.     

Structural evolution of a gravitationally detached normal fault array: analysis of 3D seismic data from the Ceduna Sub‐Basin,Great Australian Bight

The growth, interaction and controls on normal fault systems developed within stacked delta systems at extensional delta‐top settings have not been extensively examined. We aim to analyse the kinematic, spatial and temporal growth of a Cretaceous aged, thin‐skinned, listric fault system in order to further the understanding of how gravity‐driven fault segments and fault systems develop and interact at an extensional delta‐top setting. Furthermore, we aim to explore the influence of a pre‐existing structural framework on the development of gravity‐driven normal faults through the examination of two overlapping, spatially and temporally distinct delta systems. To do this, we use three‐dimensional (3D) seismic reflection data from the central Ceduna Sub‐basin, offshore southern Australia. The seismic reflection data images a Cenomanian‐Santonian fault system, and a post‐Santonian fault system, which are dip‐linked through an intervening Turonian‐early Campanian section. Both of these fault systems contain four hard‐linked strike assemblages oriented NW–SE (127–307), each composed of 13 major fault segments. The Cenomanian‐Santonian fault system detaches at the base of a shale interval of late Albian age, and is characterised by kilometre‐scale growth faults in the Cenomanian‐Sanontian interval. The post‐Santonian fault system nucleated in vertical isolation from the Cenomanian‐Santonian fault system. This is evident through displacement minima observed at Turonian‐early Campanian levels, which is indicative of vertical segmentation and eventual hard dip‐linkage. Our analysis constrains fault growth into four major evolutionary stages: (1) early Cenomanian nucleation and growth of fault segments, resulting from gravitational instability, and with faults detaching on the lower Albian interval; (2) Santonian cessation of growth for the majority of faults; (3) erosional truncation of fault upper tips coincident with the continental breakup of Australia and Antarctica (ca. 83 Ma); (4) Campanian‐Maastrichtian reactivation of the underlying Cenomanian‐Santonian fault system, inducing the nucleation, growth and consequential dip‐linkage of the post‐Santonian fault system with the underlying fault system. Our results highlight the along‐strike linkage of fault segments and the interaction through dip‐linkage and fault reactivation, between two overlapping, spatially and temporally independent delta systems of Cenomanian and late Santonian‐Maastrichtian age in the frontier Ceduna Sub‐Basin. This study has implications regarding the growth of normal fault assemblages, through vertical and lateral segment linkage, for other stacked delta systems (such as the Gulf of Mexico) where upper delta systems develop over a pre‐existing structural framework.     

Response of unconfined turbidity current to relay‐ramp topography: insights from process‐based numerical modelling

This natural‐scale experimental study combines structural modelling of soft‐linked normal‐fault relays with a CFD (computational fluid dynamics) numerical simulation of a range of unconfined turbidity currents overrunning the relay‐system topography. The flow, released from an upslope inlet gate 2000‐m wide and 50‐m to 100‐m high, rapidly expands and adjusts its thickness, velocity and sediment load to the substrate slope of 1.5°. A lower initial sediment concentration or smaller thickness renders the quasi‐steady flow slower and its sediment‐transport capacity lower. A 3D pattern of large interfering Kelvin‐Helmholtz waves causes fluctuations of the local flow velocity magnitude and sediment concentration. Four zones of preferential sediment deposition are recognized: a near‐gate zone of abrupt flow expansion and self‐regulation; a flow‐transverse zone on the counter‐slope of fault footwall edges; a flow‐transverse zone at the fault‐scarp toes and a similar transverse zone near the crest of the hanging wall counter‐slopes. The sand deposited on the counter‐slope tends to be re‐entrained and fed back to the current by a secondary reverse underflow. The spatial extent and sediment accumulation capacity of depozones depend upon the released current volume. The impact of relay system on an overrunning current depends upon the fault separation distance and stage of tectonic evolution. An early‐stage relay system, with small vertical displacement and little overlap of faults, is bypassed by the current with minimum flow disturbance and no pronounced deposition. An advanced‐stage system, with greater fault displacement and overlap, gives a similar hydraulic effect as a single fault segment if the fault separation is small. If the separation is relatively large, the flow tends to be internally redirected sideways from the ramp into the hanging wall synclinal depressions. Since normal‐fault relays are common features in extensional basins, the study bears important implications for turbiditic slope‐fan models and for the spatial sand prediction in subsurface exploration of faulted submarine slopes.     

The role of fault length,overlap and spacing in controlling extensional relay ramp fluvial system geometry

Relay ramps are integral components of normal fault systems that control sediment transport pathways in evolving rifts. We attribute differences in the geometry of fluvial systems that drain relay ramps to the scale of the ramp bounding fault segments, the spacing between segments and the amount of overlap between segments. Previous conceptual models for relay ramp geomorphological evolution have assumed that ramp fluvial catchments develop on the ramp surfaces and flow parallel to fault strike into the adjacent basin. Numerous examples exist in nature, however, that show that this is not ubiquitous. The fundamental question of what drives differences in fluvial geometry in these settings has, to date, not been fully addressed. We selected 27 relay ramps across the Basin and Range, western North America, and mapped, via GPS and remote sensing, the faults and ramp fluvial systems associated with each site. The sites represent a range of fault scales, which we define by the total outboard fault length, and a range of spacing and overlap values in order to better understand the structural controls on differences among ramp fluvial systems. Results show that the majority of a relay ramp surface drains parallel to fault strike when the outboard fault is less than about 15 km long. High overlap/spacing ratios are associated with relays along shorter (<15 km long) outboard faults, whereas lower overlap/spacing ratios are associated with relays along longer faults. Relays with lower overlap/spacing values may be more common along longer outboard faults because they survive for longer periods of time in the landscape. Our geomorphological observations can be used to predict synrift depocenter locations along segmented faults, but these observations only apply if the faults are short (<15 km long) and in early rifting stages. At longer fault lengths, ramp fluvial system geometry has no discernable relationship with any specific structural parameter.     

Contrasting transient and steady-state rivers crossing active normal faults: new field observations from the Central Apennines, Italy

We present detailed data on channel morphology, valley width and grain size for three bedrock rivers crossing active normal faults which differ in their rate, history and spatial distribution of uplift. We evaluate the extent to which downstream changes in unit stream power correlate with footwall uplift, and use this information to identify which of the channels are likely to be undergoing a transient response to tectonics, and hence clarify the key geomorphic features associated with this signal. We demonstrate that rivers responding transiently to fault slip-rate increase are characterised by significant long-profile convexities (over-steepened reaches), a loss of hydraulic scaling, channel aspect ratios which are a strong non-linear function of slope, narrow valley widths, elevated coarse-fraction grain-sizes and reduced downstream variability in channel planform geometry. We are also able to quantify the steady-state configurations of channels, that have adjusted to differing spatial uplift fields. The results challenge the application of steady-state paradigms to transient settings and show that assumptions of power-law width scaling are inappropriate for rivers, that have not reached topographic steady state, whatever exponent is used. We also evaluate the likely evolution of bedrock channels responding transiently to fault acceleration and show that the headwaters are vulnerable to beheading if the rate of over-steepened reach migration is low. We estimate that in this setting the response timescale to eliminate long-profile convexity for these channels is ∼1 Myr, and that typical hydraulic scaling is regained within 3 Myr.     

Effects of peat on the shapes of alluvial channels: examples from the Cumberland Marshes, Saskatchewan, Canada

An avulsion of the lower Saskatchewan River in the 1870s inundated a large segment of peat-covered floodplain that subsequently has become aggraded with a broad (500 km²) belt of alluvium deposited by the redirected flow. Routing of water and sediment discharge through the avulsion-affected area has been accomplished mainly by networks of sandy bedded anastomosed channels that have formed, evolved, and abandoned as the alluvial belt prograded down the floodplain slope. These processes continue today, though at a much-reduced rate. New channels, formed by crevassing and basinward extension of distributaries, are initially small and shallow, with bottom elevations situated within the avulsive alluvium but above the pre-avulsion peat (floodplain) surface. Subsequent enlargement and downcutting of many of these channels eventually uncovers the underlying peat layer whose resistance to erosion exerts significant influence on cross-sectional shape and further channel development. Peat-floored channels tend to have rectangular cross-sections, high ratios of average to maximum depth (D/D_max), and a large range of width-to-depth ratios. If the channel continues to enlarge, the peat layer eventually becomes breached, commonly leading to temporarily irregular cross-sections caused by localized scouring at the breach sites. Eventually, the peat layer is completely eroded from the channel floor by undercutting and slumping, after which channel shape becomes governed mainly by other perimeter characteristics. Channels unaffected by peat, either before the peat layer is encountered during early channel development or after it is entirely removed, tend to have low width/depth ratios and a large range of D/D_max values.     

Three-dimensional-seismic coherency signature of Niger Delta growth faults: integrating sedimentology and tectonics

This case study of growth faults and associated deltaic sedimentation in the shallow‐offshore Niger Delta uses an integrated analysis of three‐dimensional (3D)‐seismic coherence facies and wireline data that supports an evaluation of the sedimentary response to delta tectonics. The study area comprises four fault blocks bounded by a set of kilometre‐scale, basinward‐dipping, synsedimentary normal faults. Correlation of highly variable growth stratigraphy across faults was achieved by a systematic visualization and interpretation of series of coherence horizon‐slices: the detection and matching of erosive and depositional patterns (e.g. channels) across faults allowed the establishment of sedimentology‐controlled links between diverse footwall and hanging‐wall growth successions. At the same time, this interpretation approach helped to visualize seismic‐sedimentological and seismic‐geomorphological features survey‐wide at all depth levels. The integration of this extensive 3D database with lithology information from wireline logs provides a powerful tool for subsurface sedimentology interpretation. Synoptic analysis of the 3D‐seismic sedimentology interpretation with stratigraphy based fault‐kinematic analysis using throw vs. depth plots (Th–Z plots) enabled a discussion of the relation between delta tectonics and sedimentary‐system development, and the evaluation of the Th–Z method for subsurface‐lithology prediction. The interpretation results document that both motion analysis of synsedimentary deltaic faults and Th–Z‐based lithology prediction are only feasible when supported by detailed 3D information on palaeoenvironment and palaeotopography at and around studied fault systems. We therefore recommend the use of fast‐track fault‐kinematic and subsurface‐lithology predictions based on Th–Z plots only when supported by comprehensive 3D seismic‐sedimentological interpretations.     

Facies and architectural variability of sub-seismic slope-channel fills in prograding clinoforms,Mid-Jurassic Neuquén Basin,Argentina

Most slope-channel outcrop studies have been conducted at continental margin-scale on seismic data. However, in foreland and back-arc deepwater settings, sub-seismic scale slope channels hold equally important information on deepwater sediment delivery, often in hydrocarbon-bearing provinces. One such slope-channel system is examined in Lower Jurassic prograding shelf-margin clinoforms in Bey Malec Estancia, La Jardinera area, southern Neuquén Basin, Argentina. In a 4 km wide, 300 m tall, slightly oblique- to depositional-dip section of Jurassic Los Molles Formation deepwater slope deposits, seven clinoform timelines were identified by isolated slope-channel fills with thicknesses less than 50 m. Sedimentary logs, satellite images, a digital elevation model and drone photogrammetry were used to map variations in downslope channel geometry and infill facies. The slope channels are filled with sediment density flow deposits: poorly sorted conglomeratic debrites, structureless sandy high-density turbidites and well-sorted, fine-grained, graded low-density turbidites. The debrite portion decreases downslope, whereas high- and low-density turbidites increase. A grain-size analysis reveals a broad downslope fining trend of turbidite and debrite beds within slope channels with increasing water depth, and some notable bypass of conglomeratic facies to the lowermost slope channels and basin floor fans. The architecture of the slope channels changes from lateral to aggradational infill downstream. The Bey Malec clinoforms and its slope channels add new knowledge on downslope changes for sediment delivery in relatively shallow (<500 m water depth), prograding-dominant deepwater basins. They also highlight one of very few outcropping examples of oblique-type clinoforms.     

Investigating the surface process response to fault interaction and linkage using a numerical modelling approach

In order to better understand the evolution of rift‐related topography and sedimentation, we present the results of a numerical modelling study in which elevation changes generated by extensional fault propagation, interaction and linkage are used to drive a landscape evolution model. Drainage network development, landsliding and sediment accumulation in response to faulting are calculated using CASCADE, a numerical model developed by Braun and Sambridge, and the results are compared with field examples. We first show theoretically how the ‘fluvial length scale’, L_f, in the fluvial incision algorithm can be related to the erodibility of the substrate and can be varied to mimic a range of river behaviour between detachment‐limited (DL) and transport‐limited (TL) end‐member models for river incision. We also present new hydraulic geometry data from an extensional setting which show that channel width does not scale with drainage area where a channel incises through an area of active footwall uplift. We include this information in the coupled model, initially for a single value of L_f, and use it to demonstrate how fault interaction controls the location of the main drainage divide and thus the size of the footwall catchments that develop along an evolving basin‐bounding normal fault. We show how erosion by landsliding and fluvial incision varies as the footwall area grows and quantify the volume, source area, and timing of sediment input to the hanging‐wall basin through time. We also demonstrate how fault growth imposes a geometrical control on the scaling of river discharge with downstream distance within the footwall catchments, thus influencing the incision rate of rivers that drain into the hanging‐wall basin. Whether these rivers continue to flow into the basin after the basin‐bounding fault becomes fully linked strongly depends on the value of L_f. We show that such rivers are more likely to maintain their course if they are close to the TL end member (small L_f); as a river becomes progressively more under supplied, i.e. the DL end member (large L_f), it is more likely to be deflected or dammed by the growing fault. These model results are compared quantitatively with real drainage networks from mainland Greece, the Italian Apennines and eastern California. Finally, we infer the calibre of sediments entering the hanging‐wall basin by integrating measurements of erosion rate across the growing footwall with the variation in surface processes in space and time. Combining this information with the observed structural control of sediment entry points into individual hanging‐wall depocentres we develop a greater understanding of facies changes associated with the rift‐initiation to rift‐climax transition previously recognised in syn‐rift stratigraphy.     

汉江丹江口水库下游河床演变

丹江口水库建库20多年来,下游河道由堆积性河道变成了冲刷性的河道,河床物质沿程粗化,比降得以调平。水深增加幅度大于河宽,流速并不随着水深增加而加快。深槽、浅滩分布明显化,宽深比不断在减少。整个库下游变化可分为三段:1)近库段,游荡河道向单一限制性曲流转化;2)大支流影响段,河道仍保持着游荡特性;3)下游段,游荡段游荡特性减弱,弯曲段则深蚀作用加强。     

Three-dimensional analogue modelling of an alluvial basin margin affected by hydrological cycles: processes and resulting depositional sequences

The dynamics between sediment erosion and accumulation at an alluvial basin margin affected by changes in the surface hydrology are explored using scaled analogue models produced in a flume. The presented results differ from previous counterparts in that accumulation or erosion has not been forced at a spreading outlet, but occurred at a slope change produced by previously accumulated sediment. Cyclical upstream incision produced by increased stream discharge generated incised valleys, and these were subsequently filled by sediment carried by less efficient streams generated during the low discharge period. High resolution mapping using 2.5 mm contour maps allowed the study of sediment accumulation and terrain modelling. The results of three selected experiments are analysed. The only variable explored was discharge. The basin margin was simulated by a ramp inserted in a low sloping flume, consisting of two segments of different slopes selected to emulate high and low efficiency flume fans produced elsewhere. Water and fine‐medium sand entered the ramp along a narrow (0.1 m) channel and flow expanded but without occupying the complete 1.2 m flume width. Flows were highly concentrated and noncohesive. Fan‐like accumulation (slope: 0.11) began during low discharge (LD) periods at the ramp slope break, and proceeded upstream, onlapping quickly at first, but shifting to mostly progradation at the end of the period. High discharges (HD) usually generated two or three incised channels at the beginning of the period, but one of them prevailed and rapidly eroded parts of the LD fan and moved the sediment to a more distal low‐sloping fan (slope: 0.045). Both LD and HD fans passed downstream into a system of small parallel channels resembling a braided alluvial plain ending in sediment lobes. The mapping of the accumulated sediment during the various periods allowed calculation of sediment budgets for the entire flume. The stratal architecture of the deposits was investigated along five parallel trenches cut after experiment termination. The regression analysis of depositional profiles at fan‐like features (expanding flow) and at braided plains (parallel flow) indicated that these fan‐like systems are linear and dependent on applied discharge, while the latter showed an exponential decrease of slope downstream, with a starting value set up by the fan slope. Two main types of stratigraphic units were generated, the LDST and HDST (system tracts). The LDST has a nonerosive base over ‘bedrock’ and the previous HDST, filling proximal erosional topography and prograding as well, generating an onlap–downlap array. Its geometry is highly variable and dependent on pre‐existing topography. The HDST base is an important erosive surface comparable to sequence boundaries. However, there are places without erosion due to a marginal position with respect to the main stream. Indeed, the results suggest that the three‐dimensional variability of erosion and depositional processes might produce very different architectures along the same basin margin.     

Reach-scale channel geometry of mountain streams

The basic patterns and processes of steep channels remain poorly known relative to lower-gradient channels. In this analysis, characteristics of step-pool, plane-bed, and pool-riffle channels are examined using a data set of 335 channel reaches from the western United States, Nepal, New Zealand, and Panama. We analyzed differences among the three channel types with respect to hydraulics, channel geometry, boundary roughness, and bedforms. Step-pool channels have significantly steeper gradients, coarser substrate, higher values of shear stress and stream power for a given discharge, and larger ratios of bedform amplitude/wavelength (H/L). Pool-riffle channels have greater width/depth ratios and relative grain submergence (R/D₈₄) than the other channel types. Plane-bed channels tend to have intermediate values for most variables examined. Relative form submergence (R/H) is statistically similar for step-pool and pool-riffle channels. Despite the lesser relative grain submergence and greater bedform amplitude of step-pool channels, mean values of Darcy–Weisbach friction factor do not change in response to changes in relative grain submergence. These patterns suggest that adjustments along mountain streams effectively maximize resistance to flow and minimize downstream variability in resistance among the different channel types.     

Steering of experimental channels by lateral basin tilting

A major issue in tectonics and sedimentation is the role of cross‐stream tectonic tilting in steering channels. The general idea is that channels will be attracted to lateral maxima in subsidence rate. A physical experiment performed in 1999 at the St. Anthony Falls Laboratory, however, was in conflict with the idea and showed that fluvial channels and resulting stratigraphy can be insensitive to even relatively strong lateral variation in subsidence. Here, we present results from an experiment which uses a simplified relay‐ramp geometry with laterally variable uplift and subsidence to test a hypothesis developed from the earlier experiment: Tectonic tilting steers channels only when the ratio of the time scales describing lateral channel mobility to tectonic deformation is sufficiently large. Occupation time by experimental channels and sand fraction in the deposit (a proxy for channel deposition) both increase with subsidence rate indicating strong steering of channels by tectonic forcing. We also found that, due to local incision, uplift lengthened the time scale for lateral channel migration relative to subsidence. Comparing channel mobility at the beginning of the experiment, with no tectonic forcing, to later tectonic stages of the experiment indicates that active tectonics increased the channel time scale. The interplay of channel steering with uplift and subsidence led to cyclic appearance and disappearance of an autogenic lake in the hanging‐wall basin. This lake was associated with alternation between channels going around vs. across the adjoining upstream uplifted footwall region. This creation and filling of the lake under constant tectonic forcing (constant fault slip rate) in the hanging wall created subaerial fan‐delta parasequences separated by fluvial deposits.     

Depositional systems in multiphase rifts: seismic case study from the Lofoten margin,Norway

The evolution of depositional systems in multiphase rifts is influenced by the selective reactivation of faults between subsequent rift phases. The Middle Jurassic to Palaeocene tectonic history of the Lofoten margin, a segment of the North Atlantic rift system, is characterised by three distinct rift phases separated by long (>20 Myr) inter‐rift periods. The initial rift phase comprised a distinct fault initiation and linkage stage, whereas the later rift phases were characterised by selective reactivation of previously linked through‐going faults which resulted in immediate rift climax. Using 2‐D and 3‐D seismic reflection data in conjunction with shallow core data we present a 100 Myr record of shallow to deep marine depositional environments that includes deltaic clinoform packages, slope aprons and turbidite fans. The rapid re‐establishment of major faults during the later rift phases impacts on drainage systems and sediment supply. Firstly, the immediate localisation of strain and accumulation of displacement on few faults results in pronounced footwall uplift and possible fault block rotation along those faults, which makes it more likely for any antecedent fault‐transverse depositional systems to become reversed. Secondly, any antecedent axially‐sourced depositional systems that are inherited from the foregoing rift phase(s) are likely to be sustained after reactivation because such axial systems have already been directed around fault tips. Hence, the immediate localisation of strain through selective reactivation in the later rift phases restricts fault‐transverse sediment supply more than axial sediment supply, which is likely to be a key aspect of the tectono‐sedimentary evolution of multiphase rifts.     

坡度在坡面侵蚀中的作用*

本文分析了坡度在坡面侵蚀中的作用,包括不同坡度下被蚀体的特征差异,坡度对坡面溅蚀、坡面入渗、坡面径流及坡面侵蚀的影响,最后从理论上阐明了坡面侵蚀中的临界坡度。