Behavior of rare earth elements in coexisting manganese macronodules,micronodules, and sediments from the central Indian basin

Distribution characteristics of cobalt‐rich manganese deposits were evaluated from stereo photographs and video data on a seamount in the central Pacific Ocean by image analysis, photogrammetric technique, and visual observations. The results show that many locations have high crust coverages with highly undulating micro‐topography. High nodule coverages occur on relatively flat seafloor, and the nodule size distribution varies from uniform to inhomogeneous among different locations. Distribution of these deposits along detailed topographic sections show that the seafloor can be divided into nodule dominant zones between 0° and 3° slopes, with sediment patches up to 4° slopes; and crust dominant zones, which occur on slopes higher than 15°. The transition zone, between 4° and 15° slopes, has many locations, where nodules and crusts co‐occur in varying percentages. The observation of crust outcrops among sediments and nodules, as well as in the gravity core samples, indicates the presence of shallow buried crusts as well, which can substantially enhance resource evaluation of the deposits.     

Morphological Features of Co-Rich Manganese Deposits and Their Relation to Seabed Slopes

Abstract

The morphological features associated with Co-rich manganese deposits, the size variations of nodules, and the occurrence of different substrates have been analyzed, to evaluate the influence of various seabed slope angles on the distribution of these features. The coverage and size of the crusts depend on their surface morphology and seabed topography, resulting in cobble-type, lineated, or step-like outcrops. Small nodules (1–4 cm in diameter) dominate all seabed slopes, with a few locations having nodules ranging from 1 to 8 or 1 to 10 cm. Sediments invariably occur as substrates for nodules and as cover for crusts, their coverage being inversely proportional to that of the nodules and crust outcrops.

Steeper seafloor areas have large crust outcrops exposed with no or few nodules and sediments associated with them. The intermediate slopes have a combination of nodules, sediments, and crusts in various proportions, depending on topography and gradient. Large-scale nodule occurrences, followed by sediment fields and crust outcrops on seabed slopes of < 3°, 3–7°, and > 15°, respectively, represent typical morphological distribution zones of the Co-rich manganese deposits on a seamount in the central Pacific Ocean. A transition zone between nodule-dominated fields and large crust outcrops occurs for slopes from 7° to 15°. This detailed study on distribution of Co-rich deposits gives a better understanding for purposes of their exploitation.     

Submarine faults and slides on the continental shelf,northern Gulf of Alaska

Abstract

Submarine faults and slides or slumps of Quaternary age are potential environmental hazards on the outer continental shelf (OCS) of the northern Gulf of Alaska. Most faults that approach or reach the seafloor cut strata that may be equivalent in age to the upper Yakataga Formation (Pliocene‐Pleistocene). Along several faults, the seafloor is vertically offset from 5 to 20 m. A few faults appear to cut Holocene sediments, but none of these shows displacement at the seafloor. Submarine slides or slumps have been found in two places in the OCS region: (1) seaward of the Malaspina Glacier and Icy Bay, an area of 1200 km² with a slope of less than 0.5°, and (2) across the entire span of the Copper river prodelta, an area of 1730 km², having a slope of about 0.5°. Seismic profiles across these areas show disrupted reflectors and irregular topography commonly associated with submarine slides or slumps. Potential slide or slump areas have been delineated in areas of thick sediment accumulation and relatively steep slopes. These areas include (1) Kayak Trough, (2) parts of Hinchinbrook Entrance and Sea Valley, (3) parts of the outer shelf and upper slope between Kayak Island and Yakutat Bay, and (4) Bering Trough.     

Characterizing the thermal regime of cold vents at the northern Cascadia margin from bottom-simulating reflector distributions, heat-probe measurements and borehole temperature data

Several cold vents are observed at the northern Cascadia margin offshore Vancouver Island in a 10 km² region around Integrated Ocean Drilling Program Expedition 311 Site U1328. All vents are linked to fault systems that provide pathways for upward migrating fluids and at three vents methane plumes were detected acoustically in the water column. Downhole temperature measurements at Site U1328 revealed a geothermal gradient of 0.056 ± 0.004°C/m. With the measured in situ pore-water salinities the base of methane hydrate stability is predicted at 218–245 meters below seafloor. Heat-probe measurements conducted across Site U1328 and other nearby vents showed an average thermal gradient of 0.054 ± 0.004°C/m. Assuming that the bottom-simulating reflector (BSR) marks the base of the gas hydrate stability zone variations in BSR depths were used to investigate the linkages between the base of the gas hydrate stability zone and fluid migration. Variations in BSR depth can be attributed to lithology-related velocity changes or variations of in situ pore-fluid compositions. Prominent BSR depressions and reduced heat flow are seen below topographic highs, but only a portion of the heat flow reduction can be due to topography-linked cooling. More than half of the reduction may be due to thrust faulting or to pore-water freshening. Distinct changes in BSR depth below seafloor are observed at all cold vents studied and some portion of the observed decrease in the BSR depth was attributed to fault-related upwelling of warmer fluids. The observed decrease in BSR depth below seafloor underneath the vents ranges between 7 and 24 m (equivalent to temperature shifts of 0.07–0.15°C).     

Pockmarks and seafloor instability in the Olbia continental slope (northeastern Sardinian margin, Tyrrhenian Sea)

The seafloor morphology and the subsurface of the continental slope of the Olbia intraslope basin located along the eastern, passive Sardinian margin (Tyrrhenian Sea) has been mapped through the interpretation of high-resolution multibeam bathymetric data, coupled with air-gun and sparker seismic profiles. Two areas, corresponding to different physiographic domains, have been recognized along the Olbia continental slope. The upper slope domain, extending from 500 to 850 m water depth, exhibits a series of conical depressions, interpreted as pockmarks that are particularly frequent in seafloor sectors coincident with buried slope channels. In one case, they are aligned along a linear gully most likely reflecting the course of one of the abandoned channels. The location of the pockmarks thus highlights the importance of the distribution of lithologies within different sedimentary bodies in the subsurface in controlling fluid migration plumbing systems. A linear train of pockmarks is, however, present also away from the buried channels being related to a basement step, linked to a blind fault. Two bathymetric highs, interpreted as possible carbonate mounds, are found in connection with some of the pockmark fields. Although the genetic linkage of the carbonate mounds with seafloor fluid venting cannot be definitively substantiated by the lack of in situ measurements, the possibility of a close relationship is here proposed. The lower slope domain, from 850 m down to the base of the slope at 1,200 m water depth is characterized by a sudden gradient increase (from 2° to 6°) that is driven by the presence of the basin master fault that separates the continental slope from the basin plain. Here, a series of km-wide headwall scars due to mass wasting processes are evident. The landslides are characterized by rotated, relatively undeformed seismic strata, which sometimes evolve upslope into shallow-seated (less than 10 m), smaller scale failures and into headless chutes. Slope gradient may act as a major controlling factor on the seafloor instability along the Olbia continental slope; however, the association of landslides with pockmarks has been recognized in several continental slopes worldwide, thus the role of over-pressured fluids in triggering sediment failure in the Olbia slope can not be discarded. In the absence of direct ground truthing, the geological processes linked to subsurface structures and their seafloor expressions have been inferred through the comparison with similar settings where the interpretation of seafloor features from multibeam data has been substantiated with seafloor sampling and geochemical data.     

New discovery of seafloor hydrothermal activity on the Indian Ocean Carlsberg Ridge and Southern North Atlantic Ridge—progress during the 26th Chinese COMRA cruise

The 26th Chinese COMRA (China Ocean Mineral Resources Research & Development Association) cruise was an important cruise. The Carlsberg Ridge (CR) of the Northwest Indian Ocean and the North Atlantic Ridge (NAR), in which less investigation has been carried out for hydrothermal activities, were investigated and studied during the first two legs of the 26th COMRA cruise. During the first leg, we found one hydrothermal activity field located in the CR at 3.5 -3.8 N on the Northwest Indian Ocean Ridge (NWIR), and sampled seafloor polymetallic sulfide deposits where only abnormalities were found before. During the second leg, we found a new hydrothermal anomaly field located in the NAR at 4 -7 N. The discovery of two hydrothermal and anomaly fields filled in the gap of hydrothermal investigation and study in the corresponding regions for China.     

Newly discovered hydrothermal fields along the ultraslow-spreading Southwest Indian Ridge around 63°E

The ultraslow-spreading Southwest Indian Ridge(SWIR) to the east of the Melville fracture zone is characterized by very low melt supply and intensive tectonic activity. Due to its weak thermal budget and extremely slow spreading rate, the easternmost SWIR was considered to be devoid of hydrothermal activity until the discovery of the inactive Mt. Jourdanne hydrothermal field(27°51′S, 63°56′E) in 1998. During the COMRA DY115-20 cruise in2009, two additional hydrothermal fields(i.e., the Tiancheng(27°51′S, 63°55′E) and Tianzuo(27°57′S, 63°32′E)fields) were discovered. Further detailed investigations of these two hydrothermal sites were conducted by Chinese manned submersible Jiaolong in 2014–2015. The Tiancheng filed can be characterized as a lowtemperature(up to 13.2°C) diffuse flow hydrothermal field, and is hosted by fractured basalts with hydrothermal fauna widespread on the seafloor. The Tianzuo hydrothermal field is an inactive sulfide field, which is hosted by ultramafic rocks and controlled by detachment fault. The discovery of the three hydrothermal fields around Segment #11 which receives more melt than the regional average, provided evidence for local enhanced magmatism providing heat source to drive hydrothermal circulation. We further imply that hydrothermal activity and sulfide deposits may be rather promising along the easternmost SWIR.     

西南印度洋49°～56°E洋脊段的热液羽状流:来自深水中的氦同位素异常证据

海水中的氦同位素能对海底热液活动进行有效示踪。本文对在西南印度洋49°~56°E洋脊段采集的5条CTD拖曳剖面共14件深水样品进行了氦氖同位素分析。通过分析水体中存在的氦同位素异常,探讨调查区热液异常的特征和热液羽状流的分布。分析表明,5条CTD剖面均存在δ3He异常,其中CTD7-2(位置:37.927°S、49.412°E,水深2 140m,离底高度100m)的δ3He值最大,达到49.2%。根据δ3He分布特征,认为调查区内存在至少6处热液羽状流,其中37.927°S、49.412°E以西数千米范围内可能存在海底热液喷口。     

Geothermal modeling of the gas hydrate stability zone along the Krishna Godavari Basin

A wide-spread bottom simulating reflector (BSR), interpreted to mark the thermally controlled base of the gas hydrate stability zone, is observed over a close grid of multichannel seismic profiles in the Krishna Godavari Basin of the eastern continental margin of India. The seismic data reveal that gas hydrate occurs in the Krishna Godavari Basin at places where water depths exceed 850 m. The thickness of the gas hydrate stability zone inferred from the BSR ranges up to 250 m. A conductive model was used to determine geothermal gradients and heat flow. Ground truth for the assessment and constraints on the model were provided by downhole measurements obtained during the National Gas Hydrate Program Expedition 01 of India at various sites in the Krishna Godavari Basin. Measured downhole temperature gradients and seafloor-temperatures, sediment thermal conductivities, and seismic velocity are utilized to generate regression functions for these parameters as function of overall water depth. In the first approach the base of gas hydrate stability is predicted from seafloor bathymetry using these regression functions and heat flow and geothermal gradient are calculated. In a second approach the observed BSR depth from the seismic profiles (measured in two-way travel time) is converted into heat flow and geothermal gradient using the same ground-truth data. The geothermal gradient estimated from the BSR varies from 27 to 67°C/km. Corresponding heat flow values range from 24 to 60 mW/m². The geothermal modeling shows a close match of the predicted base of the gas hydrate stability zone with the observed BSR depths.     

Geochronology of the American-Antarctic Ridge

A new map of chrons for the American-Antarctic Ridge area has been compiled. Its analysis and the calculations performed showed that the seafloor spreading with respect to its axis started before 85 My B.P. The spreading directions were 115° (chrons C34-C29), 145° (chrons C29-C21), 110° (chrons C21-C5C), and 85° (chrons C5C-C1). The maximum rates of about 4 cm/year were reached earlier than 52 My B.P.; subsequently, a progressive general decrease in the spreading rate has been observed. According to our forecast, the spreading may cease in the following 3.5 My.     

Effects of using inclined parametric echosounding on sub-bottom acoustic imaging and advances in buried object detection

This study reports an adaptation of a parametric echosounder system using 15 kHz as secondary frequency to investigate the angular response of sub-bottom backscatter strength of layered mud, providing a new method for enhanced acoustic detection of buried targets. Adaptions to achieve both vertical (0°) and non-vertical inclination (1–15°, 30°, 45° and 60°) comprise mechanical tilting of the acoustic transducer and electronic beam steering. Data were acquired at 18 m water depth at a study site characterized by a flat, muddy seafloor where a 0.1 m diameter power cable lies 1–2 m below the seafloor. Surveying the cable with vertical incidence revealed that the buried cable can hardly be discriminated against the backscatter strength of the layered mud. However, the backscatter strength of layered mud decreases strongly at >3±0.5° incidence and the layered mud echo pattern vanishes beyond 5°. As a consequence, the backscatter pattern of the buried cable is very pronounced in acoustic images gathered at 15°, 30°, 45° and 60° incidence. The size of the cable echo pattern increases linearly with incidence. These effects are attributed to reflection loss from layered mud at larger incidence and to the scattering of the 0.1 m diameter buried cable. Data analyses support the visual impression of superior detection of the cable with an up to 2.6-fold increase of the signal-to-noise ratio at 40° incidence compared to the vertical incidence case.     

Seafloor geological studies above active gas chimneys off Egypt (Central Nile Deep Sea Fan)

Four mud volcanoes of several kilometres diameter named Amon, Osiris, Isis, and North Alex and located above gas chimneys on the Central Nile Deep Sea Fan, were investigated for the first time with the submersible Nautile. One of the objectives was to characterize the seafloor morphology and the seepage activity across the mud volcanoes. The seepage activity was dominated by emissions of methane and heavier hydrocarbons associated with a major thermal contribution. The most active parts of the mud volcanoes were highly gas-saturated (methane concentrations in the water and in the sediments, respectively, of several hundreds of nmol/L and several mmol/L of wet sediment) and associated with significantly high thermal gradients (at 10 m below the seafloor, the recorded temperatures reached more than 40 °C). Patches of highly reduced blackish sediments, mats of sulphide-oxidizing bacteria, and precipitates of authigenic carbonate were detected, indicative of anaerobic methane consumption. The chemosynthetic fauna was, however, not very abundant, inhibited most likely by the high and vigorous fluxes, and was associated mainly with carbonate-crust-covered seafloor encountered on the southwestern flank of Amon. Mud expulsions are not very common at present and were found limited to the most active emission centres of two mud volcanoes, where slow extrusion of mud occurs. Each of the mud volcanoes is fed principally by a main narrow channel located below the most elevated areas, most commonly in the centres of the structures. The distribution, shape, and seafloor morphology of the mud volcanoes and associated seeps over the Central Nile Deep Sea Fan are clearly tectonically controlled.     

Petrophysical characteristics of rocks and sulfides from the SWIR hydrothermal field

Study of petrophysical properties of rocks in seafioor hydrothermal fields has great significance for inves- tigation of seafloor hydrothermal activities, especially for polymetallic sulfides prospecting. In the present study, based on the current experimental conditions, we conducted systematic experiments to measure the magnetic susceptibility, electrical resistivity, porosity, density, as well as acoustic wave velocity of seafloor rocks and sulfides. Subsequently, we measured the physical characteristics of hydrothermal sulfides, basalts and peridotites which were collected from newly discovered seafloor hydrothermal fields at 49.6°E, 50.5°E, 5 1°E, 63.5°E, and 63.9°E of the Southwest Indian Ridge （SWIR）. Previously available and newly collected data were combined to characterize the physical differences between polymetallic sulfides and rocks. We also discussed the impact of hydrothermal alteration on the bedrock and demonstrated how these petrophysical properties of rocks can help in geophysical prospecting of seafloor hydrothermal fields as indicators.     

Did the East Pacific rise subduct beneath the North America plate (western Mexico)?

New data collected between the northernmost tip of the East Pacific rise (18°05'N, 105°35'W) and the Middle America trench provide evidence that the seafloor, which lacks significant sedimentary cover, has a typical spreading-derived abyssal hill topography. The tectonic fabric of this seafloor is concave to the west, as it is today at the tip of the East Pacific rise. Farther to the east, at the outer wall of the trench, the seafloor topography exhibits a north-south trending fabric. We suggest that this fabric originated along the East Pacific rise, as it reached the trench and possibly subducted beneath the North America plate prior to the development of the complex connection of the East Pacific rise with the Rivera transform.     

Applying Iterative Method to Solving High-Order Terms of Seafloor Topography

Abstract

We introduce an iterative inversion method to address the problems in high-order seafloor topography inversion using gravity data (gravity anomaly and vertical gravity gradient anomaly), such as the difficulty in computing the equation and the uniqueness of the calculation results. A part of the South China Sea is selected as the experimental area. Considering the coherence and admittance function of gravity topography and vertical gravity gradient topography, the inversion band of the gravity anomaly and vertical gravity gradient anomaly in the study area is 30?km–120?km. Seafloor topography models of different orders are constructed using an iterative method, and the performance of each seafloor topography model is analyzed against ETOPO1 and other seafloor topography models. The experimental results show that as the inversion order increases, the clarity and richness of seafloor topographic expression continuously improve. However, the accuracy of seafloor topography inversion does not improve significantly when the inversion order exceeds a certain value, which is related to the contribution of high-order seafloor topography to gravity information. The results show that the accuracy of BGT4 (inversion model constructed by the gravity anomaly) is slightly poorer than that of BVGGT4 (inversion model constructed by the vertical gravity gradient anomaly) in areas with complex topography, such as multi-seamounts and trenches, and the results are generally better in areas with flat seafloor topography.     

Analysis of submarine slumping in the continental slope off the southern coast of Israel

Abstract

The continental slope off the coast of Israel is riddled with numerous large slump scars at depths greater than 400 m. Recent scar slumps are situated in the steepest central portions of the continental slope (400–450 m depth, α=6°), frequently disfiguring older slump scars in its lower portions. The slumping materials were probably largely transported downslope in the form of density currents, and occasionally by sliding of large sediment chunks. Upslope retrogressive slumping phases progressively disfigure the shape of the slump scars until they totally disappear, causing net reduction of the thickness of the sedimentary column. To provide a basis for the quantitative analysis of slumping, laboratory vane tests, triaxial consolidated, undrained compression tests with pore‐pressure measurements, drained direct shear tests, and consolidation tests were performed oh undisturbed samples. Because the sediments consist of normally consolidated silty clays, the geotechnical properties measured on the core samples can be readily extrapolated for greater depths, assuming the sediments are homogeneous. Angles of internal friction measured by direct shearing under drained conditions are ?_d =24°‐25°, designating the maximum possible angle of a stable infinite slope. These angles are appreciably higher than the steepest slopes in the investigated area, and a drained slumping mechanism is therefore considered unlikely. The slopes of the slump scar walls are about 20°; therefore, in the absence of active erosional, sedimentological, or tectonic agents, these walls have long‐term stability (drained shear). Undrained shear failure resulting in slope instability may be attributable to rapid changes in slope geometry (undercutting or oversteepening of the slope), fluctuations in pore pressure, or accelerations associated with earthquakes. Undrained shear‐strength parameters were determined by both laboratory consolidated‐un‐drained triaxial tests and by miniature vane shear tests. The angles of internal friction that were measured are ?_cu =15°‐17°, and the c_u/p_o values range between 0.22 and 0.75. An analysis of the force equilibrium within the sediments leads to the conclusion that horizontal earthquake‐induced accelerations, as little as 5–6% of gravity, are sufficient to cause slope failure in the steepest slope zone (400–450 m depth, α = 6°, c_u /p_o =0.25). Collapse resulting from liquefaction is unlikely, as the sediments are normally consolidated silty clays with intermediate sensitivity, S_t =2–4.

The existence of slump scars in the lower portion of the continental slope, characterized by gentle slopes (α=1°‐3°) and sediments with high shear strength (c _u /p _o=0.30–0.50) is attributed to large horizontal accelerations(k=12–16% of gravity). Owing to the wide range of geotechnical properties of the sediments (c_u /p_o = 0.20–0.75) and the inclination of the continental slope (α=1°‐6°), the same earthquake may generate a wide range of horizontal accelerations in different portions of the continental slope, and slumping may occur wherever the stability equilibrium is disrupted.     

Analysis of submarine slumping in the continental slope off the southern coast of Israel

Abstract

The continental slope off the coast of Israel is riddled with numerous large slump scars at depths greater than 400 m. Recent scar slumps are situated in the steepest central portions of the continental slope (400–450 m depth, α = 6°), frequently disfiguring older slump scars in its lower portions. The slumping materials were probably largely transported downslope in the form of density currents, and occasionally by sliding of large sediment chunks. Upslope retrogressive slumping phases progressively disfigure the shape of the slump scars until they totally disappear, causing net reduction of the thickness of the sedimentary column. To provide a basis for the quantitative analysis of slumping, laboratory vane tests, triaxial consolidated, undrained compression tests with pore‐pressure measurements, drained direct shear tests, and consolidation tests were performed oh undisturbed samples. Because the sediments consist of normally consolidated silty clays, the geotechnical properties measured on the core samples can be readily extrapolated for greater depths, assuming the sediments are homogeneous. Angles of internal friction measured by direct shearing under drained conditions are ?_d =24°‐25°, designating the maximum possible angle of a stable infinite slope. These angles are appreciably higher than the steepest slopes in the investigated area, and a drained slumping mechanism is therefore considered unlikely. The slopes of the slump scar walls are about 20°; therefore, in the absence of active erosional, sedimentological, or tectonic agents, these walls have long‐term stability (drained shear). Undrained shear failure resulting in slope instability may be attributable to rapid changes in slope geometry (undercutting or oversteepening of the slope), fluctuations in pore pressure, or accelerations associated with earthquakes. Undrained shear‐strength parameters were determined by both laboratory consolidated‐un‐ drained triaxial tests and by miniature vane shear tests. The angles of internal friction that were measured are ?_cu =15°‐17°, and the c_u/p _o values range between 0.22 and 0.75. An analysis of the force equilibrium within the sediments leads to the conclusion that horizontal earthquake‐induced accelerations, as little as 5–6% of gravity, are sufficient to cause slope failure in the steepest slope zone (400–450 m depth, α=6°, c_u/p _o=0.25). Collapse resulting from liquefaction is unlikely, as the sediments are normally consolidated silty clays with intermediate sensitivity, S_t =2–4.

The existence of slump scars in the lower portion of the continental slope, characterized by gentle slopes (α=1°‐3°) and sediments with high shear strength (c_u/p _o=0.30–0.50) is attributed to large horizontal accelerations (k= 12–16% of gravity). Owing to the wide range of geotechnical properties of the sediments (c_u/p _o= 0.20–0.75) and the inclination of the continental slope (α=1°‐6°), the same earthquake may generate a wide range of horizontal accelerations in different portions of the continental slope, and slumping may occur wherever the stability equilibrium is disrupted.     

Cold seeps at the salt front in the Lower Congo Basin II: The impact of spatial and temporal evolution of salt-tectonics on hydrocarbon seepage

This study investigates the distribution and evolution of seafloor seepage in the vicinity of the salt front, i.e., the seaward boundary of salt-induced deformation in the Lower Congo Basin (LCB). Seafloor topography, backscatter data and TV-sled observations indicate active fluid seepage from the seafloor directly at the salt front, whereas suspected seepage sites appear to be inactive at a distance of >10 km landward of the deformation front. High resolution multichannel seismic data give detailed information on the structural development of the area and its influence on the activity of individual seeps during the geologic evolution of the salt front region. The unimpeded migration of gas from fan deposits along sedimentary strata towards the base of the gas hydrate stability zone within topographic ridges associated with relatively young salt-tectonic deformation facilitates seafloor seepage at the salt front. Bright and flat spots within sedimentary successions suggest geological trapping of gas on the flanks of mature salt structures in the eastern part of the study area. Onlap structures associated with fan deposits which were formed after the onset of salt-tectonic deformation represent potential traps for gas, which may hinder gas migration towards seafloor seeps. Faults related to the thrusting of salt bodies seawards also disrupt along-strata gas migration pathways. Additionally, the development of an effective gas hydrate seal after the cessation of active salt-induced uplift and the near-surface location of salt bodies may hamper or prohibit seafloor seepage in areas of advanced salt-tectonic deformation. This process of seaward shifting active seafloor seepage may propagate as seaward migrating deformation affects Congo Fan deposits on the abyssal plain. These observations of the influence of the geologic evolution of the salt front area on seafloor seepage allows for a characterization of the large variety of hydrocarbon seepage activity throughout this compressional tectonic setting.     

A global barotropic ocean model driven by synoptic atmospheric disturbances for detecting seafloor vertical displacements from in situ ocean bottom pressure measurements

A global barotropic ocean model forced by atmospheric disturbances is developed for the detection of seafloor vertical displacements from in situ ocean bottom pressure (OBP) data. The model accuracy is validated by deep-sea OBP data at more than 100 sites obtained over the global ocean. Parameters and boundary conditions including the horizontal resolution incorporated in the ocean model are tested in order to accurately simulate the nontidal (>2 days) OBP variations. The horizontal resolution is found to the factor that most significantly affects the simulated result. The finer the horizontal resolution applied, the smaller the model variability is. The model accuracy is highest when the horizontal resolution is 1/12°, but deteriorates when the horizontal resolution is finer than 1/12°. This may indicate a failure of the energy dissipation parameterization in the barotropic ocean model. Using the developed 1/12° model, the root-mean-square of the observed nontidal OBP component can be reduced by 18 % as an average of all the OBP data used. It is found that the 1/12° model is useful for the detection of a slow seafloor vertical displacement of centimeters related to the 2011 Tohoku-Oki earthquake from in situ OBP records near the hypocenter of the earthquake.     

Predicting Global Seafloor Topography Using Multi-Source Data

A new one-minute global seafloor topography model was derived from vertical gravity gradient anomalies (VGG), altimetric gravity anomalies, and ship soundings. Ship soundings are used to constrain seafloor topography at wavelengths longer than 200 km and to calibrate the topography to VGG (or gravity) ratios at short wavelengths area by area. VGG ratios are used to predict seafloor topography for wavelength bands of 100–200 km and to suppress the effect of crust isostasy. Gravity anomalies are used to recover seafloor topography at wavelengths shorter than 100 km. The data processing procedure is described in detail in this paper. The accuracy of the model is evaluated using ship soundings and existing models, including General Bathymetric Charts of the Oceans (GEBCO), DTU10, ETOPO1, and SIO V15.1. The results show that, in the discussed regions, the accuracy of the model is better than ETOPO1, GEBCO, and DTU10. Additionally, the model is comparable with V15.1, which is generally believed to have the highest accuracy. In the north-central Pacific Ocean, the accuracy of the model increased by approximately 29.5% compared with the V15.1 model. This indicates that a more accurate seafloor topography model can be formed by combining gravity anomalies, VGG, and ship soundings.