A study of Guptkashi,Uttarakhand earthquake of 6 February 2017 (<Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript>5.3) in the Himalayan arc and implications for ground motion estimation

The 2017 Guptkashi earthquake occurred in a segment of the Himalayan arc with high potential for a strong earthquake in the near future. In this context, a careful analysis of the earthquake is important as it may shed light on source and ground motion characteristics during future earthquakes. Using the earthquake recording on a single broadband strong-motion seismograph installed at the epicenter, we estimate the earthquake’s location (30.546° N, 79.063° E), depth (H?=?19 km), the seismic moment (M₀?=?1.12×10¹⁷ Nm, M _w 5.3), the focal mechanism (φ?=?280°, δ?=?14°, λ?=?84°), the source radius (a?=?1.3 km), and the static stress drop (Δσ _s ~22 MPa). The event occurred just above the Main Himalayan Thrust. S-wave spectra of the earthquake at hard sites in the arc are well approximated (assuming ω^?2 source model) by attenuation parameters Q(f)?=?500f^0.9, κ?=?0.04 s, and f_max?=?infinite, and a stress drop of Δσ?=?70 MPa. Observed and computed peak ground motions, using stochastic method along with parameters inferred from spectral analysis, agree well with each other. These attenuation parameters are also reasonable for the observed spectra and/or peak ground motion parameters in the arc at distances ≤?200 km during five other earthquakes in the region (4.6?≤?M _w ?≤?6.9). The estimated stress drop of the six events ranges from 20 to 120 MPa. Our analysis suggests that attenuation parameters given above may be used for ground motion estimation at hard sites in the Himalayan arc via the stochastic method.     

An evaluation of earthquake hazard parameters in the Iranian Plateau based on the Gumbel III distribution

The Gumbel’s third asymptotic distribution (GIII) of the extreme value method is employed to evaluate the earthquake hazard parameters in the Iranian Plateau. This research quantifies spatial mapping of earthquake hazard parameters like annual and 100-year mode beside their 90 % probability of not being exceeded (NBE) in the Iranian Plateau. Therefore, we used a homogeneous and complete earthquake catalogue during the period 1900–2013 with magnitude M _w ? ≥?4.0, and the Iranian Plateau is separated into equal area mesh of 1° late?×?1° long. The estimated result of annual mode with 90 % probability of NBE is expected to exceed the values of M _w 6.0 in the Eastern part of Makran, most parts of Central and East Iran, Kopeh Dagh, Alborz, Azerbaijan, and SE Zagros. The 100-year mode with 90 % probability of NBE is expected to overpass the value of M _w 7.0 in the Eastern part of Makran, Central and East Iran, Alborz, Kopeh Dagh, and Azerbaijan. The spatial distribution of 100-year mode with 90 % probability of NBE uncovers the high values of earthquake hazard parameters which are frequently connected with the main tectonic regimes of the studied area. It appears that there is a close communication among the seismicity and the tectonics of the region.     

Temporal distribution of earthquakes using renewal process in the Dasht-e-Bayaz region

Temporal distribution of earthquakes with M _w > 6 in the Dasht-e-Bayaz region, eastern Iran has been investigated using time-dependent models. Based on these types of models, it is assumed that the times between consecutive large earthquakes follow a certain statistical distribution. For this purpose, four time-dependent inter-event distributions including the Weibull, Gamma, Lognormal, and the Brownian Passage Time (BPT) are used in this study and the associated parameters are estimated using the method of maximum likelihood estimation. The suitable distribution is selected based on logarithm likelihood function and Bayesian Information Criterion. The probability of the occurrence of the next large earthquake during a specified interval of time was calculated for each model. Then, the concept of conditional probability has been applied to forecast the next major (M _w > 6) earthquake in the site of our interest. The emphasis is on statistical methods which attempt to quantify the probability of an earthquake occurring within a specified time, space, and magnitude windows. According to obtained results, the probability of occurrence of an earthquake with M _w > 6 in the near future is significantly high.     

Age determination of paleotsunami sediments around Lombok Island,Indonesia, and identification of their possible tsunamigenic earthquakes

Age determination of paleotsunami sediment from Lombok Island, Indonesia, and surrounding area has been carried out using the 210 Pb method in BATAN Jakarta. The basic theory of this method assumes that weathering of sediments, including paleotsunami sediments, will result in 210 Pb enrichment. The principle of this method is to calculate 210 Pb contents accumulation in a particular sedimentation interval from the surface to the deeper buried sediments. The results are then converted into age or depositional time in years ago unit. The dating results from the paleotsunami sediments of the Gawah Pudak(S8°46’2.91’’, E115°56’34.23’’) and Gili Trawangan areas(S8°21’1.38’’, E116°2’36.6’’) indicate the Gawah Pudak sediments were deposited 37 years ago(c. in 1977)and 22 years ago(c. in 1992). Three paleotsunami sediments from Gili Trawangan were deposited 149 years ago(c. in 1865), 117 years ago(c. in 1897) and 42 years ago(c. in 1972). These results are then compared to the available Indonesian earthquake catalogue data. This study reveals that paleotsunami sediments around Lombok Islands, from older to younger, were caused by the 1857 earthquake(epicentre in Bali Sea; M7; S8°00’09.45’’,E115°29’56.41’’), 1897 earthquake(epicentre in Flores Sea;M5.5; S6°47’59.62’’, E120°48’03.5’’ or Sulu Sea earthquake; M8.5; 70 km NW of Basilan Island), the 1975 earthquake(Nusa Tenggara; S10°6’16.61’’, E123°48’09.39’’), 1977 earthquake(in Waingapu, Sumba; M8.0;S11°5’39.34’’, E118°27’50.86’’) and the 1992 earthquake(Flores; M7.8; S8°28’52.11’’, E121°53’44.3’’).     

Impact of Indian ocean dipole on the coastal upwelling features off the southwest coast of India

A three-dimensional regional ocean model is used to examine the impact of positive Indian ocean dipole (pIOD) events on the coastal upwelling features at the southwest coast of India (SWCI). Two model experiments are carried out with different surface boundary conditions that prevailed in the normal and pIOD years from 1982 to 2010. Model experiments demonstrate the weakening of coastal upwelling at the SWCI in the pIOD years. The reduced southward meridional wind stress off the SWCI leads to comparatively lower offshore Ekman transport during August–October in the pIOD years to that in normal years. The suppressed coastal upwelling results in warmer sea surface temperature and deeper thermocline in the pIOD years during June–September. The offshore spatial extent of upwelled colder (<?22 °C) water was up to 75.5° E in August–September in normal years that was limited up to 76.2° E in pIOD years. The heat budget analysis reveals the decreased contribution of vertical entrainment process to the mixed layer cooling in pIOD years which is almost half of that of normal years in October. The net heat flux term shows warming tendency during May–November with a higher magnitude (+?0.4 °C day^?1) in normal years than pIOD years (+?0.28 °C day^?1). The biological productivity is found to reduce during the pIOD years as the concentration of phytoplankton and zooplankton decreases over the region of coastal upwelling at SWCI. Nitrate concentration in the pIOD years dropped by half during August–September and dropped by an order of magnitude in October as compared to its ambient concentration of 13 μmol L^?1 in normal years.     

Three-dimensional admittance analysis of lithospheric elastic thickness over the Louisville Ridge

Using bathymetry and altimetric gravity anomalies, a 1° 9 1° lithospheric effective elastic thickness(Te) model over the Louisville Ridge and its adjacent regions is calculated using the moving window admittance technique. For comparison, three bathymetry models are used: general bathymetric charts of the oceans, SIO V15.1,and BAT_VGG. The results show that BAT_VGG is more suitable for calculating T e than the other two models. T e along the Louisville Ridge was re-evaluated. The southeast of the ridge has a medium Te of 10–20 km, while Te increases dramatically seaward of the Tonga-Kermadec trench as a result of the collision of the Pacific and IndoAustralian plates.     

Activation of seismicity in Central and South Asia after the Makran earthquakes: Possible acceleration of preparation of large seismic events in the Tien Shan region

Two zones of seismicity (ten events with M _w = 7.0–7.7) stretching from Makran and the Eastern Himalaya to the Central and EasternTien Shan, respectively, formed over 11 years after the great Makran earthquake of 1945 (M _w = 8.1). Two large earthquakes (M _w = 7.7) hit theMakran area in 2013. In addition, two zones of seismicity (M ≥ 5.0) occurred 1–2 years after theMakran earthquake in September 24, 2013, stretching in the north-northeastern and north-northwestern directions. Two large Nepal earthquakes struck the southern extremity of the “eastern” zone (April 25, 2015, M _w = 7.8 and May 12, 2015, M _w = 7.3), and the Pamir earthquake (December 7, 2015, M _w = 7.2) occurred near Sarez Lake eastw of the “western” zone. The available data indicate an increase in subhorizontal stresses in the region under study, which should accelerate the possible preparation of a series of large earthquakes, primarily in the area of the Central Tien Shan, between 70° and 79° E, where no large earthquakes (M _w ≥ 7.0) have occurred since 1992.     

A statistical analysis of seismo-ionospheric TEC anomalies before 63 <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> ≥ 5.0 earthquakes in Turkey during 2003–2016

In this study, pre-seismic and post-seismic total electron content (TEC) anomalies of 63 M_w?≥?5.0 earthquakes in Turkey (36°–42°N, 26°–45°E) were statistically investigated. The largest earthquake that occurred in Turkey during 2003–2016 is the M_w 7.1 Van earthquake on October 23, 2011. The TEC data of epicenters is obtained from CODE-GIM using a simple 4-point bivariate interpolation. The anomalies of TEC variations were determined by using a quartile-based running median process. In order to validate GIM results, we used the GPS-TEC data of available four IGS stations within the size of the Van earthquake preparation area. The anomalies that are detected by GIM and GPS-TEC show a similar pattern. Accordingly, the results obtained with CODE-GIM are reliable. The statistical results show that there are not prominent earthquake precursors for M_w?≤?6.0 earthquakes in Turkey.     

Temporal and spatial distributions of precursory seismicity rate changes in the Thailand-Laos-Myanmar border region: implication for upcoming hazardous earthquakes

To study the prospective areas of upcoming strong-to-major earthquakes, i.e., M _w  ≥ 6.0, a catalog of seismicity in the vicinity of the Thailand-Laos-Myanmar border region was generated and then investigated statistically. Based on the successful investigations of previous works, the seismicity rate change (Z value) technique was applied in this study. According to the completeness earthquake dataset, eight available case studies of strong-to-major earthquakes were investigated retrospectively. After iterative tests of the characteristic parameters concerning the number of earthquakes (N) and time window (T _w ), the values of 50 and 1.2 years, respectively, were found to reveal an anomalous high Z-value peak (seismic quiescence) prior to the occurrence of six out of the eight major earthquake events studied. In addition, the location of the Z-value anomalies conformed fairly well to the epicenters of those earthquakes. Based on the investigation of correlation coefficient and the stochastic test of the Z values, the parameters used here (N = 50 events and T _w  = 1.2 years) were suitable to determine the precursory Z value and not random phenomena. The Z values of this study and the frequency-magnitude distribution b values of a previous work both highlighted the same prospective areas that might generate an upcoming major earthquake: (i) some areas in the northern part of Laos and (ii) the eastern part of Myanmar.     

Seismic source zoning and maximum credible earthquake prognosis of the Greater Kashmir Territory,NW Himalaya

We present the seismic source zoning of the tectonically active Greater Kashmir territory of the Northwestern Himalaya and seismicity analysis (Gutenberg-Richter parameters) and maximum credible earthquake (m _max) estimation of each zone. The earthquake catalogue used in the analysis is an extensive one compiled from various sources which spans from 1907 to 2012. Five seismogenic zones were delineated, viz. Hazara-Kashmir Syntaxis, Karakorum Seismic Zone, Kohistan Seismic Zone, Nanga Parbat Syntaxis, and SE-Kashmir Seismic Zone. Then, the seismicity analysis and maximum credible earthquake estimation were carried out for each zone. The low b value (<1.0) indicates a higher stress regime in all the zones except Nanga Parbat Syntaxis Seismic Zone and SE-Kashmir Seismic Zone. The m _max was estimated following three different methodologies, the fault parameter approach, convergence rates using geodetic measurements, and the probabilistic approach using the earthquake catalogue and is estimated to be M _w 7.7, M _w 8.5, and M _w 8.1, respectively. The maximum credible earthquake (m _max) estimated for each zone shows that Hazara Kashmir Syntaxis Seismic Zone has the highest m _max of M _w 8.1 (±0.36), which is espoused by the historical 1555 Kashmir earthquake of M _w 7.6 as well as the recent 8 October 2005 Kashmir earthquake of M _w 7.6. The variation in the estimated m _max by the above discussed methodologies is obvious, as the definition and interpretation of the m _max change with the method. Interestingly, historical archives (～900 years) do not speak of a great earthquake in this region, which is attributed to the complex and unique tectonic and geologic setup of the Kashmir Himalaya. The convergence is this part of the Himalaya is distributed not only along the main boundary faults but also along the various active out-of-sequence faults as compared to the Central Himalaya, where it is mainly adjusted along the main boundary fault.     

A new <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> estimation parameter for use in earthquake early warning systems

We propose a method that employs the squared displacement integral (ID2) to estimate earthquake magnitudes in real time for use in earthquake early warning (EEW) systems. Moreover, using τ _c and P _d for comparison, we establish formulas for estimating the moment magnitudes of these three parameters based on the selected aftershocks (4.0 ≤ M _s  ≤ 6.5) of the 2008 Wenchuan earthquake. In this comparison, the proposed ID2 method displays the highest accuracy. Furthermore, we investigate the applicability of the initial parameters to large earthquakes by estimating the magnitude of the Wenchuan M _s 8.0 mainshock using a 3-s time window. Although these three parameters all display problems with saturation, the proposed ID2 parameter is relatively accurate. The evolutionary estimation of ID2 as a function of the time window shows that the estimation equation established with ID2 ^Ref determined from the first 8-s of P wave data can be directly applicable to predicate the magnitudes of 8.0. Therefore, the proposed ID2 parameter provides a robust estimator of earthquake moment magnitudes and can be used for EEW purposes.     

Body wave attenuation characteristics in the crust of Alborz region and North Central Iran

Attenuation of P and S waves has been investigated in Alborz and north central part of Iran using the data recorded by two permanent and one temporary networks during October 20, 2009, to December 22, 2010. The dataset consists of 14,000 waveforms from 380 local earthquakes (2 < M _L < 5.6). The extended coda normalization method (CNM) was used to estimate quality factor of P (Q _P) and S waves (Q _S) at seven frequency bands (0.375, 0.75, 1.5, 3, 6, 12, 24 Hz). The Q _P and Q _S values have been estimated at lapse times from 40 to 100 s. It has been observed that the estimated values of Q _P and Q _S are time independent; therefore, the mean values of Q _P and Q _S at different lapse times have been considered. The frequency dependence of quality factor was determined by using a power-law relationship. The frequency-dependent relationship for Q _P was estimated in the form of (62 ± 7)f ^{(1.03 ± 0.07)} and (48 ± 5)f ^{(0.95 ± 0.07)} in Alborz region and North Central Iran, respectively. These relations for Q _S for Alborz region and North Central Iran have estimated as (83 ± 8)f ^{(0.99 ± 0.07)} and (68 ± 5)f ^{(0.96 ± 0.05)}, respectively. The observed low Q values could be the results of thermoelastic effects and/or existing fracture. The estimated frequency-dependent relationships are comparable with tectonically active regions.     

New magnitude scaling relations for earthquake early warning in the Alborz region,Iran

Rapid magnitude estimation relations for earthquake early warning systems in the Alborz region have been developed based on the initial first seconds of the P-wave arrival. For this purpose, a total of 717 accelerograms recorded by the Building and Housing Research Center in the Alborz region with the magnitude (M_w) range of 4.8–6.5 in the period between 1995 and 2013 were employed. Average ground motion period (\( \tau_{\text{c}} \)) and peak displacement (\( P_{\text{d}} \)) in different time windows from the P-wave arrival were calculated, and their relation with magnitude was examined. Four earthquakes that were excluded from the analysis process were used to validate the results, and the estimated magnitudes were found to be in good agreement with the observed ones. The results show that using the proposed relations for the Alborz region, earthquake magnitude could be estimated with acceptable accuracy even after 1 s of the P-wave arrival.     

Frictional and viscous effects on the nucleation phase of an earthquake

We study the frictional and viscous effects on earthquake nucleation, especially for the nucleation phase, based on a one-degree-of-freedom spring-slider model with friction and viscosity. The frictional and viscous effects are specified by the characteristic displacement, U _c, and viscosity coefficient, η, respectively. Simulation results show that friction and viscosity can both lengthen the natural period of the system and viscosity increases the duration time of motion of the slider. Higher viscosity causes a smaller amplitude of lower velocity motion than lower viscosity. A change of either U _c (under large η) or η (under large U _c) from a large value (U _ch for U _c and η _h for η) to a small one (U _cl for U _c and η _l for η) in two stages during sliding can result in a clear nucleation phase prior to the P-wave. The differences δU _c = U _ch ? U _cl and δη = η _h ? η _l are two important factors in producing a nucleation phase. The difference between the nucleation phase and the P-wave increases with either δU _c or δη. Like seismic observations, the peak amplitude of P-wave, which is associated with the earthquake magnitude, is independent upon the duration time of nucleation phase. A mechanism specified with a change of either η or U _c from a larger value to a smaller one due to temporal variations in pore fluid pressure and temperature in the fault zone based on radiation efficiency is proposed to explain the simulation results and observations.     

Updated earthquake catalogue for seismic hazard analysis in Pakistan

A reliable and homogenized earthquake catalogue is essential for seismic hazard assessment in any area. This article describes the compilation and processing of an updated earthquake catalogue for Pakistan. The earthquake catalogue compiled in this study for the region (quadrangle bounded by the geographical limits 40–83° N and 20–40° E) includes 36,563 earthquake events, which are reported as 4.0–8.3 moment magnitude (M_W) and span from 25 AD to 2016. Relationships are developed between the moment magnitude and body, and surface wave magnitude scales to unify the catalogue in terms of magnitude M_W. The catalogue includes earthquakes from Pakistan and neighbouring countries to minimize the effects of geopolitical boundaries in seismic hazard assessment studies. Earthquakes reported by local and international agencies as well as individual catalogues are included. The proposed catalogue is further used to obtain magnitude of completeness after removal of dependent events by using four different algorithms. Finally, seismicity parameters of the seismic sources are reported, and recommendations are made for seismic hazard assessment studies in Pakistan.     

An Evaluation of Coulomb Stress Changes from Earthquake Productivity Variations in the Western Gulf of Corinth,Greece

Spatial and temporal evolution of the stress field in the seismically active and well-monitored area of the western Gulf of Corinth, Greece, is investigated. The highly accurate and vast regional catalogues were used for inverting seismicity rate changes into stress variation using a rate/state-dependent friction model. After explicitly determining the physical quantities incorporated in the model (characteristic relaxation time, fault constitutive parameters, and reference seismicity rates), we looked for stress changes across space and over time and their possible association with earthquake clustering and fault interactions. We focused our attention on the Efpalio doublet of January 2010 (M = 5.5 and M = 5.4), with a high aftershock productivity, and attempted to reproduce and interpret stress changes prior to and after the initiation of this seismicity burst. The spatial distribution of stress changes was evaluated after smoothing the seismological data by means of a probability density function (PDF). The inverted stress calculations were compared with the calculations derived from an independent approach (elastic dislocation model) and this comparison was quantified. The results of the two methods are in good agreement (up to 80 %) in the far field, with the inversion technique providing more robust results in the near field, where they are more sensitive to the uncertainties of coseismic slip distribution. It is worth mentioning that the stress inversion model proved to be a very sensitive stress meter, able to detect even small stress changes correlated with spatio–temporal earthquake clustering. Data analysis was attempted from 1975 onwards to simulate the stress changes associated with stronger earthquakes over a longer time span. This approach revealed that only M > 5.5 events induce considerable stress variations, although in some cases there was no evidence for such stress changes even after an M > 5.5 earthquake.     

The 2014–2015 earthquake series in the northern Upper Rhine Graben,Central Europe

Since March 2014, an unusually large amount of earthquakes occur southeast of the city of Darmstadt in the northern Upper Rhine Graben. During the period, until April 2015, we have recorded 356 earthquakes with magnitudes ranging from M_L?=??0.6 to 4.2. We identified two source clusters separated laterally by about 5 km. The hypocentres within these clusters are aligned vertically extending over a depth range from 1 to 8 km with a lateral extent of about 1 to 2 km. Focal mechanisms show left-lateral strike-slip movements; b values are changing with time between b?=?0.6 and b?=?0.9. This is the first time in almost 150 years that such high earthquake rates have been observed in the region. Historical accounts dating back to the nineteenth century report of over 2000 felt earthquakes over a time span from 1869 to 1871. From these, maximum intensities of VII have been estimated. Other seismic activities in the region were reported in the 1970s. The observations of the 2014–2015 earthquake series do not completely match a typical main shock–aftershock sequence or a typical earthquake swarm. Especially the activity at the beginning of the earthquake series may be considered as a mixture of a main shock–aftershock sequence and a short-lasting swarm event. Whether or not the time gap between the current seismic activity, which actually takes place at the same locations as parts of the seismic swarm in 1869–1871, and the seismic activity in the nineteenth century or the seismic activity in the 1970s can be interpreted as a seismic cycle remains unclear.     

Earthquake hazard and risk assessment based on Unified Scaling Law for Earthquakes: Greater Caucasus and Crimea

We continue applying the general concept of seismic risk analysis in a number of seismic regions worldwide by constructing regional seismic hazard maps based on morphostructural analysis, pattern recognition, and the Unified Scaling Law for Earthquakes (USLE), which generalizes the Gutenberg-Richter relationship making use of naturally fractal distribution of earthquake sources of different size in a seismic region. The USLE stands for an empirical relationship log₁₀N(M, L)?=?A?+?B·(5 – M)?+?C·log₁₀L, where N(M, L) is the expected annual number of earthquakes of a certain magnitude M within a seismically prone area of linear dimension L. We use parameters A, B, and C of USLE to estimate, first, the expected maximum magnitude in a time interval at seismically prone nodes of the morphostructural scheme of the region under study, then map the corresponding expected ground shaking parameters (e.g., peak ground acceleration, PGA, or macro-seismic intensity). After a rigorous verification against the available seismic evidences in the past (usually, the observed instrumental PGA or the historically reported macro-seismic intensity), such a seismic hazard map is used to generate maps of specific earthquake risks for population, cities, and infrastructures (e.g., those based on census of population, buildings inventory). The methodology of seismic hazard and risk assessment is illustrated by application to the territory of Greater Caucasus and Crimea.     

Location and source mechanism of the Karlsruhe earthquake of 24 September 2014

On 24 September 2014, a M_L 2.3 earthquake occurred southwest of the urban area of Karlsruhe, Germany, which was felt by a few people (maximum intensity I ₀?=?III). It was the first seismic event in this highly populated area since an I ₀?=?VII earthquake in 1948. Data of 35 permanent and temporary seismometers were analysed to localise the event and to determine the focal mechanism to compare it to previous seismicity. Restricting the data to P- and S-phases from 18 nearby stations and optimising the local earth model result in an epicentre in the southwest of the city at 48.986°N/8.302°E and in a hypocentral depth of 10 km. To calculate the focal mechanism, 22 P- and 5 S_H-polarities were determined that constrain a stable left lateral strike-slip focal mechanism with a minor thrusting component and nodal planes striking NE-SW and NW-SE. The epicentre lies in the vicinity of the I ₀?=?VII earthquake of 1948. Both events are part of the graben-parallel flower structure beneath the Upper Rhine Graben, parallel to the active Rastatt source zone, which runs 5 km further east and included the epicentre of the 1933 Rastatt I ₀?=?VII earthquake. The focal mechanisms of the 2014 and 1948 earthquakes show NE-SW striking nodal planes that dip to the southeast. However, for the 1948 event, a normal faulting mechanism was determined earlier. Taking the uncertainty of the epicentre and focal mechanism in 1948 and its fault dimensions into account, both events might have happened on the same fault plane.     

Seismicity anomalies before the great earthquake of <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>=8.1 in the Kunlun Pass and its significance to earthquake prediction

A great earthquake of M _S=8.1 took place in the west of Kunlun Pass on November 14, 2001. The epicenter is located at 36.2°N and 90.9°E. The analysis shows that some main precursory seismic patterns appear before the great earthquake, e.g., seismic gap, seismic band, increased activity, seismicity quiet and swarm activity. The evolution of the seismic patterns before the earthquake of M _S=8.1 exhibits a course very similar to that found for earthquake cases with M _S≥7. The difference is that anomalous seismicity before the earthquake of M _S=8.1 involves in the larger area coverage and higher seismic magnitude. This provides an evidence for recognizing precursor and forecasting of very large earthquake. Finally, we review the rough prediction of the great earthquake and discuss some problems related to the prediction of great earthquakes.