共查询到17条相似文献,搜索用时 187 毫秒
1.
为了解析底部高含沙层特征,研究了物理影响机制和时均含沙量剖面。采用波流边界层1DV泥沙数学模型,结合试验资料,通过设置不同的计算工况进行了影响因素敏感性分析;在此基础上,提出波浪相关的时均泥沙扩散系数分布,考虑主要影响机制,推导了基于边界层物理过程的波浪作用下时均含沙量剖面表达式。结果表明,底部高含沙层与波浪边界层密切相关,是受水动力和床面形态综合影响的结果。仅建立高含沙层与水动力或床面形态的单一关系是有局限性的。含沙量层化效应和制约沉速对底部高含沙层具有重要影响。提出的平底床面含沙量剖面表达式为幂函数-Rouse-指数分布,漩涡沙波床面为指数-幂函数-Rouse分布。预期可应用于二维和三维泥沙数值模拟。 相似文献
2.
波流边界层水动力模拟对研究波流相互作用和泥沙运动具有重要的理论意义和实践价值。开发了波流边界层1DV垂向一维水动力数值模型,可用于模拟漩涡沙波床面和平底床面水动力特征。模型的构建基于边界层控制方程,平底床面采用k-ε模型,沙波床面采用双层模型,提出了漩涡层和紊动扩散层交界面紊动动能和紊动耗散率表达式。试验资料验证表明,模型较好地模拟了波浪-水流-床面共同作用下的边界层水动力特征,包括波周期内不同相位流速分布、紊动动能、剪切应力等以及波致时均流速分布和波流相互作用下的时均流速分布等。根据所建模型,讨论了不同床面和波流组合条件下的水动力特征。该模型可为研究波流边界层内水动力特征提供工具。 相似文献
3.
基于波浪边界层理论及单向流泥沙起动Shields曲线,推证出波浪泥沙起动Shields曲线;基于波流边界层理论,提出表述波流边界层动力特征的波流比因子X及非线性作用因子Y,并建立了Y与X的相关关系;在此基础之上,结合单向流及波浪泥沙起动Shields曲线,推证出波流共同作用下泥沙起动Shields曲线。结果表明:波浪泥沙起动Shields曲线在层流区与单向流光滑紊流区曲线保持一致,粗糙紊流区与单向流粗糙紊流区曲线保持一致,过渡区线型为折线,由层流区及粗糙紊流区曲线延长交汇获得;X及Y能够合理地表征波流边界层动力对比特征及非线性作用特征;波流泥沙起动Shields曲线介于波浪及单向流泥沙起动Shields曲线之间,随着波流比因子X的不同,依据非线性作用因子Y,自动在波浪及单向流泥沙起动Shields曲线之间非线性过渡。建立的波流泥沙起动Shields曲线与试验结果吻合较好,且能够概括单向流、波浪及波流等不同动力及细沙、粗沙等不同粒径的泥沙起动条件。 相似文献
4.
基于波浪边界层理论及单向流泥沙起动Shields曲线,推证出波浪泥沙起动Shields曲线;基于波流边界层理论,提出表述波流边界层动力特征的波流比因子X及非线性作用因子Y,并建立了Y与X的相关关系;在此基础之上,结合单向流及波浪泥沙起动Shields曲线,推证出波流共同作用下泥沙起动Shields曲线。结果表明:波浪泥沙起动Shields曲线在层流区与单向流光滑紊流区曲线保持一致,粗糙紊流区与单向流粗糙紊流区曲线保持一致,过渡区线型为折线,由层流区及粗糙紊流区曲线延长交汇获得;X及Y能够合理地表征波流边界层动力对比特征及非线性作用特征;波流泥沙起动Shields曲线介于波浪及单向流泥沙起动Shields曲线之间,随着波流比因子X的不同,依据非线性作用因子Y,自动在波浪及单向流泥沙起动Shields曲线之间非线性过渡。建立的波流泥沙起动Shields曲线与试验结果吻合较好,且能够概括单向流、波浪及波流等不同动力及细沙、粗沙等不同粒径的泥沙起动条件。 相似文献
5.
建立了波浪、底部离岸流、泥沙运动和沙滩剖面演变耦合数学模型,模拟了实验室中波浪作用下沙坝剖面的形成过程,讨论了各个物理参数对剖面上的水动力和地形变化的影响。通过参数率定,较好地复演了不规则波作用下沙滩地形由均匀斜坡向沙坝剖面的演变,波高、底部离岸流、输沙率和剖面演变的计算结果与实测数据吻合良好。采用数值实验和误差分析方法,讨论了破碎波水滚倾角、泥沙扩散系数和床面休止角等物理参数对计算结果的影响。研究表明,所建立的模型能较好地描述波浪作用下沙坝剖面形成过程中的重要物理机制。 相似文献
6.
植物的存在改变了河流水动力特性,造成独特的床面冲淤态势。利用实验室水槽模拟含淹没植物的河道,对床面形态和紊流统计特性参数进行测量,研究不同类型紊流作用下的床面冲淤特征以及床面起伏对流动的影响。结果表明:床面剪切紊流条件下,床面形态为马蹄坑-沙沟/沙脊与沙波复合分布,床面变形加剧了流速沿水深不均匀分布并促进水流动量交换;在自由剪切混合层紊流条件下,床面形态为植物根部马蹄形冲坑及其后方沙沟、沙脊交错分布,床面变形对流动的影响并不显著;“类二重紊流”条件下,床面形态同样表现为马蹄坑-沙沟/沙脊-沙波复合,床面变形促进植物层内部的水流动量交换、抑制紊动清扫,抑制植物层外部的动量交换、促进紊动喷射。 相似文献
7.
为更加准确地模拟重金属随泥沙迁移的过程,避免传统模型在描述重金属的吸附解吸时只能片面地考虑简单物理过程的不足,在水沙输移模拟的基础上,同时考虑了重金属随泥沙迁移的物理和化学过程,建立了完整的水动力-泥沙-重金属迁移数学模型。模型利用泥沙颗粒表面复杂形貌与电荷的关系来修正表面络合模型并以此分析了水体中的重金属与泥沙颗粒表面基团间的化学成键作用,同时根据化学反应的不同条件,并结合床面冲淤,将床面泥沙分为有氧层和无氧层分别考虑重金属的沉积与再释放。模型模拟了水槽试验中重金属Ni随泥沙迁移的情况,计算结果与实测数据的对比表明了建立的模型可以合理地反映重金属随泥沙的迁移过程。 相似文献
8.
为更加准确地模拟重金属随泥沙迁移的过程,避免传统模型在描述重金属的吸附解吸时只能片面地考虑简单物理过程的不足,在水沙输移模拟的基础上,同时考虑了重金属随泥沙迁移的物理和化学过程,建立了完整的水动力-泥沙-重金属迁移数学模型。模型利用泥沙颗粒表面复杂形貌与电荷的关系来修正表面络合模型并以此分析了水体中的重金属与泥沙颗粒表面基团间的化学成键作用,同时根据化学反应的不同条件,并结合床面冲淤,将床面泥沙分为有氧层和无氧层分别考虑重金属的沉积与再释放。模型模拟了水槽试验中重金属Ni随泥沙迁移的情况,计算结果与实测数据的对比表明了建立的模型可以合理地反映重金属随泥沙的迁移过程。 相似文献
9.
选取国内外常用的水动力学模型(EFDC)和典型的浅水湖泊(太湖),采用拉丁超立方取样(LHS),研究湖泊水动力模块中常用的5个重要参数(风拖曳系数、床面粗糙高度、涡粘性系数、紊流扩散系数以及风遮挡系数)对湖体水位和流速的影响。结果表明:针对大型浅水湖泊,湖泊岸线形状和湖底地形、湖泊周围地形、湖泊水面风场对模拟结果产生决定性影响。尤其是在湖湾区和周边地形比较复杂的地区,风场参数对水动力模拟结果不确定性的贡献率最大。在垂向上,表层流速受到参数不确定性的影响最大,底层次之,中层最小。床面粗糙高度对水动力模拟结果不确定性贡献率较风场参数要小,水体涡粘滞系数和扩散系数影响则更小。故在选择大型浅水湖泊水动力模型参数时,要充分考虑湖泊岸线和周围地形,着重率定风场参数以及床面粗糙高度。 相似文献
10.
针对床面粗糙形态具有自相似性的特点,应用二元分形插值迭代函数系统,对床面粗糙形态进行了分形插值模拟,模拟中分形插值邻域Ak根据Kriging空间插值方法的变异函数球状模型确定,垂直比例因子sm,n通过基于插值点数据的多元统计分析确定.结果表明:分形插值重构的床面粗糙形态与原床面形态的相似程度将随着插值点信息量ic的增加... 相似文献
11.
Preliminary results are reported from an experimental study of the interaction between turbulence, sediment transport and bedform dynamics over the transition from dunes to upper stage plane beds. Over the transition, typical dunes changed to humpback dunes (mean velocity 0–8 ms-1, depth 01 m, mean grain size 0.3 mm) to nominally plane beds with low relief bed waves up to a few mm high. All bedforms had a mean length of 0.7–0.8 m. Hot film anemometry and flow visualization clearly show that horizontal and vertical turbulent motions in dune troughs decrease progressively through the transition while horizontal turbulence intensities increase near the bed on dune backs through to a plane bed. Average bedload and suspended load concentrations increase progressively over the transition, and the near-bed transport rate immediately downstream of flow reattachment increases markedly relative to that near dune crests. This relative increase in sediment transport near reattachment appears to be due to suppression of upward directed turbulence by increased sediment concentration, such that velocity close to the bed can increase more quickly downstream of reattachment. Low-relief bedwaves on upper-stage plane beds are ubiquitous and give rise to laterally extensive, mm-thick planar laminae; however, within such laminae are laminae of more limited lateral extent and thickness, related to the turbulent bursting process over the downstream depositional surface of the bedwaves. 相似文献
12.
通过水槽试验研究浅水非线性波作用下沙纹床面底层流动特性,利用CCD图像技术观测分析非对称沙纹的形成和演化规律。利用声学多普勒测速仪(ADV)测量非对称沙纹底床上的流场,得到了不同波高、周期、水深条件下的沙纹峰顶和谷底断面的瞬时速度。试验结果分析表明,浅水非线性波作用下床面上形成非对称沙纹,其近底流速具有较强紊动特性,随着距床面距离的增大紊动强度逐渐减弱。在水流方向改变时,沙纹背部具有明显漩涡运动。沙纹背后形成的漩涡能起到维持沙纹的作用。浅水非线性波作用下,沙纹的形成原因主要是床面泥沙颗粒在非对称流动和床面近壁粘性底层中漩涡结构动力作用下,作受迫摆动、推移所致。 相似文献
13.
LAWRENCE A. AMY PETER J. TALLING VICTORIA O. EDMONDS ESTHER J. SUMNER ANNE LESUEUR 《Sedimentology》2006,53(6):1411-1434
The settling behaviour of particulate suspensions and their deposits has been documented using a series of settling tube experiments. Suspensions comprised saline solution and noncohesive glass‐ballotini sand of particle size 35·5 μm < d < 250 μm and volume fractions, φs, up to 0·6 and cohesive kaolinite clay of particle size d < 35·5 μm and volume fractions, φm, up to 0·15. Five texturally distinct deposits were found, associated with different settling regimes: (I) clean, graded sand beds produced by incremental deposition under unhindered or hindered settling conditions; (II) partially graded, clean sand beds with an ungraded base and a graded top, produced by incremental deposition under hindered settling conditions; (III) graded muddy sands produced by compaction with significant particle sorting by elutriation; (IV) ungraded clean sand produced by compaction and (V) ungraded muddy sand produced by compaction. A transition from particle size segregation (regime I) to suppressed size segregation (regime II or III) to virtually no size segregation (IV or V) occurred as sediment concentration was increased. In noncohesive particulate suspensions, segregation was initially suppressed at φs ~ 0·2 and entirely inhibited at φs ≥ 0·6. In noncohesive and cohesive mixtures with low sand concentrations (φs < 0·2), particle segregation was initially suppressed at φm ~ 0·07 and entirely suppressed at φm ≥ 0·13. The experimental results have a number of implications for the depositional dynamics of submarine sediment gravity flows and other particulate flows that carry sand and mud; because the influence of moving flow is ignored in these experiments, the results will only be applicable to flows in which settling processes, in the depositional boundary, dominate over shear‐flow processes, as might be the case for rapidly decelerating currents with high suspended load fallout rates. The ‘abrupt’ change in settling regimes between regime I and V, over a relatively small change in mud concentration (<5% by volume), favours the development of either mud‐poor, graded sandy deposits or mud‐rich, ungraded sandy deposits. This may explain the bimodality in sediment texture (clean ‘turbidite’ or muddy ‘debrite’ sand or sandstone) found in some turbidite systems. Furthermore, it supports the notion that distal ‘linked’ debrites could form because of a relatively small increase in the mud concentration of turbidity currents, perhaps associated with erosion of a muddy sea floor. Ungraded, clean sand deposits were formed by noncohesive suspensions with concentrations 0·2 ≤ φs ≤ 0·4. Hydrodynamic sorting is interpreted as being suppressed in this case by relatively high bed aggradation rates which could also occur in association with sustained, stratified turbidity currents or noncohesive debris flows with relatively high near‐bed sediment concentrations. 相似文献
14.
Wen−Cheng Liu 《Environmental Geology》2005,47(4):535-546
Settling velocities of suspended cohesive sediment in estuaries vary over a range of several orders in magnitude. Variations in the suspended sediment concentration are often considered as the principal cause. Turbulence and the suspended sediment concentration, as well as other factors such as salinity, dissolved organic substances, flocculation ability, and the rate of floc growth affect setting velocities. A laterally–averaged finite difference model for hydrodynamics and cohesive sediment transport is developed and applied in the Tanshui River estuary, Taiwan. The model has been calibrated and verified with water surface elevation, longitudinal velocity, salinity, and cohesive sediment measured. The overall performance of the model is in qualitative agreement with the available data. The model is used to investigate the influence of settling velocity on cohesive sediment transport dynamics. The simulation indicates that the turbidity maximum zone is near Kuan–Du. When settling velocities increase the surface cohesive sediment concentration at Kuan–Du station trends to decrease and bottom cohesive sediment concentration increases. Both surface and bottom cohesive sediment concentrations decrease at Taipei Bridge and Pa–Ling Bridge. This implies that suspended sediment advected seaward and deposited. There is consequently a net seaward flux of suspended sediment near surface, and a net landward flux near the bed. 相似文献
15.
Flows with high suspended sediment concentrations are common in many sedimentary environments, and their flow properties may show a transitional behaviour between fully turbulent and quasi‐laminar plug flows. The characteristics of these transitional flows are known to be a function of both clay concentration and type, as well as the applied fluid stress, but so far the interaction of these transitional flows with a loose sediment bed has received little attention. Information on this type of interaction is essential for the recognition and prediction of sedimentary structures formed by cohesive transitional flows in, for example, fluvial, estuarine and deep‐marine deposits. This paper investigates the behaviour of rapidly decelerated to steady flows that contain a mixture of sand, silt and clay, and explores the effect of different clay (kaolin) concentrations on the dynamics of flow over a mobile bed, and the bedforms and stratification produced. Experiments were conducted in a recirculating slurry flume capable of transporting high clay concentrations. Ultrasonic Doppler velocity profiling was used to measure the flow velocity within these concentrated suspension flows. The development of current ripples under decelerated flows of differing kaolin concentration was documented and evolution of their height, wavelength and migration rate quantified. This work confirms past work over smooth, fixed beds which showed that, as clay concentration rises, a distinct sequence of flow types is generated: turbulent flow, turbulence‐enhanced transitional flow, lower transitional plug flow, upper transitional plug flow and a quasi‐laminar plug flow. Each of these flow types produces an initial flat bed upon rapid flow deceleration, followed by reworking of these deposits through the development of current ripples during the subsequent steady flow in turbulent flow, turbulence‐enhanced transitional flow and lower transitional plug flow. The initial flat beds are structureless, but have diagnostic textural properties, caused by differential settling of sand, silt and cohesive mud, which forms characteristic bipartite beds that initially consist of sand overlain by silt or clay. As clay concentration in the formative flow increases, ripples first increase in mean height and wavelength under turbulence‐enhanced transitional flow and lower transitional plug‐flow regimes, which is attributed to the additional turbulence generated under these flows that subsequently causes greater lee side erosion. As clay concentration increases further from a lower transitional plug flow, ripples cease to exist under the upper transitional plug flow and quasi‐laminar plug flow conditions investigated herein. This disappearance of ripples appears due to both turbulence suppression at higher clay concentrations, as well as the increasing shear strength of the bed sediment that becomes more difficult to erode as clay concentration increases. The stratification within the ripples formed after rapid deceleration of the transitional flows reflects the availability of sediment from the bipartite bed. The exact nature of the ripple cross‐stratification in these flows is a direct function of the duration of the formative flow and the texture of the initial flat bed, and ripples do not form in cohesive flows with a Reynolds number smaller than ca 12 000. Examples are given of how the unique properties of the current ripples and plane beds, developing below decelerated transitional flows, could aid in the interpretation of depositional processes in modern and ancient sediments. This interpretation includes a new model for hybrid beds that explains their formation in terms of a combination of vertical grain‐size segregation and longitudinal flow transformation. 相似文献
16.
The Lower Cretaceous Britannia Formation (North Sea) includes an assemblage of sandstone beds interpreted here to be the deposits of turbidity currents, debris flows and a spectrum of intermediate flow types termed slurry flows. The term ‘slurry flow’ is used here to refer to watery flows transitional between turbidity currents, in which particles are supported primarily by flow turbulence, and debris flows, in which particles are supported by flow strength. Thick, clean, dish‐structured sandstones and associated thin‐bedded sandstones showing Bouma Tb–e divisions were deposited by high‐ and low‐density turbidity currents respectively. Debris flow deposits are marked by deformed, intraformational mudstone and sandstone masses suspended within a sand‐rich mudstone matrix. Most Britannia slurry‐flow deposits contain 10–35% detrital mud matrix and are grain supported. Individual beds vary in thickness from a few centimetres to over 30 m. Seven sedimentary structure division types are recognized in slurry‐flow beds: (M1) current structured and massive divisions; (M2) banded units; (M3) wispy laminated sandstone; (M4) dish‐structured divisions; (M5) fine‐grained, microbanded to flat‐laminated units; (M6) foundered and mixed layers that were originally laminated to microbanded; and (M7) vertically water‐escape structured divisions. Water‐escape structures are abundant in slurry‐flow deposits, including a variety of vertical to subvertical pipe‐ and sheet‐like fluid‐escape conduits, dish structures and load structures. Structuring of Britannia slurry‐flow beds suggests that most flows began deposition as turbidity currents: fully turbulent flows characterized by turbulent grain suspension and, commonly, bed‐load transport and deposition (M1). Mud was apparently transported largely as hydrodynamically silt‐ to sand‐sized grains. As the flows waned, both mud and mineral grains settled, increasing near‐bed grain concentration and flow density. Low‐density mud grains settling into the denser near‐bed layers were trapped because of their reduced settling velocities, whereas denser quartz and feldspar continued settling to the bed. The result of this kinetic sieving was an increasing mud content and particle concentration in the near‐bed layers. Disaggregation of mud grains in the near‐bed zone as a result of intense shear and abrasion against rigid mineral grains caused a rapid increase in effective clay surface area and, hence, near‐bed cohesion, shear resistance and viscosity. Eventually, turbulence was suppressed in a layer immediately adjacent to the bed, which was transformed into a cohesion‐dominated viscous sublayer. The banding and lamination in M2 are thought to reflect the formation, evolution and deposition of such cohesion‐dominated sublayers. More rapid fallout from suspension in less muddy flows resulted in the development of thin, short‐lived viscous sublayers to form wispy laminated divisions (M3) and, in the least muddy flows with the highest suspended‐load fallout rates, direct suspension sedimentation formed dish‐structured M4 divisions. Markov chain analysis indicates that these divisions are stacked to form a range of bed types: (I) dish‐structured beds; (II) dish‐structured and wispy laminated beds; (III) banded, wispy laminated and/or dish‐structured beds; (IV) predominantly banded beds; and (V) thickly banded and mixed slurried beds. These different bed types form mainly in response to the varying mud contents of the depositing flows and the influence of mud on suspended‐load fallout rates. The Britannia sandstones provide a remarkable and perhaps unique window on the mechanics of sediment‐gravity flows transitional between turbidity currents and debris flows and the textures and structuring of their deposits. 相似文献
17.
波浪在斜坡沙质海床上破碎会加剧泥沙输移导致海床形态变化,研究破碎波作用下沙质海床形态变化机制对于岸滩演变分析极为重要。在波浪水槽中采用中值粒径0.47 mm原型沙铺设1∶20坡度的底床模型进行试验研究,测量不同波浪条件下床面形态和沙坝顶端悬浮泥沙浓度变化。通过测量和计算破碎带输沙率、沙坝尺度和沙坝移动速度,分析破碎波作用下沙质斜坡海床上床面形态变化规律。试验结果表明,破碎带沙坝顶端的悬浮泥沙浓度与水深和底部床面密切相关,在形成沙坝和沙坝水平方向移动时,悬浮泥沙浓度较大;斜坡上沙坝前后来回运动的周期大小具有随机性,沙坝既有向岸又有离岸移动;在多组波长时间作用后沙坝尺度趋于稳定,底床净输沙量趋于0。 相似文献