不同激发环境下井中气枪震源特征研究

基于单枪容量为250 in~3的BHS-2200LL井中气枪,在内径0.2、5.0m不同激发井中开展了气枪震源特征对比分析,研究表明:15.0m井中气枪激发产生的信号优势频率集中在10~40Hz,比在0.2m井中的低,这主要是由于较大水体利于气泡的振荡;2在能量方面,5.0m井中激发信号的能量强于0.2m井中的,相差1个数量级,单次激发的传播距离可达9km;32种激发环境下产生的气枪信号都具有较好的重复性。     

大容量气枪震源主动探测技术系统及试验研究

针对地下介质动态变化监测研究中的信噪比、震源可重复性和波速精确测量等关键问题,利用大容量气枪震源,构建了一套高性能的主动探测技术系统,该系统包括气枪震源激发和信号接收,并在河北、云南和新疆等地的内陆水库和人工水体等不同激发环境,开展了探索性试验研究。试验结果表明:①气枪震源激发频率低,能量强,具有高度的可重复性、可通过叠加提高信噪比、探测距离大、绿色环保等特征,是一种理想的低频震源;②该探测技术系统操作简单,易控制,自动化程度高,探测精度高,能观测到固体潮引起的连续变化,可应用于区域尺度地下介质动态变化监测和开展4D 地震学研究;③气枪震源激发产生的信号震相丰富,有较强的S波,为研究地壳介质特性、应力分布及其动态变化等提供了新的技术路线。     

大容量气枪震源子波激发特性分析

大容量气枪水库激发作为陆地震源的可行性与有效性已经得到成功验证.为进一步提高气枪震源激发效果,本文通过水库气枪激发试验对单枪容量为2000 in³的气枪震源激发子波特征及规律进行了研究.依据近场水听器和远场短周期地震仪记录数据,分析气枪震源沉放深度、工作压力等不同激发条件对压力脉冲和气泡脉冲的影响.有助于人们根据不同尺度地下结构探测对震源激发信号的要求,调整气枪激发参数和激发环境,获得最佳激发效果.试验结果表明：（1）沉放深度对压力脉冲波形影响较小,其优势频率不随沉放深度而改变;（2）随着沉放深度从5 m增加到11 m,气泡脉冲的优势频率由5 Hz增加至7 Hz,其最大振幅亦近线性递增;（3）工作压力越大,激发压力脉冲能量越强,而对气泡脉冲的影响主要体现在主频降低.适合远距离深穿透地下结构探测的低频信号主要来自大容量气枪所激发气泡的反复振荡,由于气枪振荡过程非常复杂,本文通过较为简洁的数学和物理模型进行了解释.     

气枪震源激发模式及应用

气枪震源是一种重要的人工地震震源。气枪阵列理论的提出,使得气枪阵列设计技术日趋成熟,并能够在石油勘探和地球物理探测中得到更加广泛的运用。气枪震源在不同领域中应用时,需要不同的组合和激发模式,以适应不同的探测要求。加强主脉冲和加强气泡脉冲,是目前两种主要的气枪激发模式。通过比较研究两种气枪激发模式,讨论各种激发模式在激发时间、气枪间距、频率、分辨率等方面的差异,为气枪震源的广泛运用提供依据。     

大容量气枪震源长江定点激发信号检测

地学长江计划“安徽段实验”是大容量气枪震源在长江的首次激发。本文针对布设在气枪固定激发点附近的流动台和周边固定台接收到的气枪信号进行线性叠加分析近场和远场信号的时频特性,利用叠加结果检测气枪信号的传播特性,分析不同环境因素对信号传播距离的影响。结果表明：①近岸首台可以接收到清晰的压力脉冲、气泡脉冲的体波和面波信号;②气枪信号主频为5Hz左右,随震中距的增加,压力脉冲信号衰减很快,信号主频频带变窄;③对信号传播距离进行初步检测,最近的传播距离为180km,最远共有3个激发点传播达到260km,夜晚激发信号传播距离较远。     

水库气枪震源产生的S波及其分裂

人工气枪震源在陆地水库可以有效激发S波,S波能量较强,与ML1.6天然地震相当。气枪可用于S波分裂研究,对布置在燕山隆起带的流动地震台的气枪信号进行了S波分裂参数分析,结果表明,快剪切波偏振优势方向为NWW和NNE向,偏振方向和断裂的性质密切相关。气枪是高度可重复性人工震源,利用气枪定点激发和定点接收有可能精确获取S波分裂参数随时间的变化规律,为地震预测探索实践提供可靠的物理途径     

气枪震源资料反褶积方法及处理流程研究

气枪震源具有极高的可重复性,可用于地下介质变化的监测。但不同工作条件下气枪震源产生的信号会存在细微差异,反褶积方法能在一定程度上消除由震源变化引起的记录信号变化。为了去除气枪震源子波信号,获取气枪源到台站之间的格林函数,通常需要选取一种恰当的方法对地震波形数据进行反褶积处理。频率域水准反褶积和时间域迭代反褶积是在接收函数等领域已被广泛使用的2种反褶积方法。本文以云南宾川主动源资料为例,对比了利用这2种方法处理气枪震源资料的效果,结果表明：在计算效率方面,频率域水准反褶积方法更具优势;在处理结果的信噪比方面,时间域迭代反褶积方法表现更好,P波初至也更清晰。此外,进一步讨论了在多炮资料的处理过程中反褶积和叠加等操作的顺序问题,最后提出了从气枪震源资料中提取气枪源到台站之间的格林函数的一般流程。     

落锤震源不同参数激发的数值模拟研究

本文通过研究落锤震源的物理模型,利用有限元方法,对震源激发到子波形成的全过程进行数值模拟研究。从激发参数角度,分别对软地表（土壤）和硬地表（岩石）条件下的不同落锤震源参数的激发进行数值模拟,分析不同震源参数对子波能量和频谱的影响,并比较不同地表岩性介质对震源参数变化的响应。同时将模拟结果同已有的数据采集研究和实验研究进行对比,以说明其有效性。研究结果显示落锤震源的激发效果同重锤质量、冲击速度、基板大小和基板材料的关系,为浅地表地震勘查中落锤震源参数的选择提供了参考依据。     

水库大容量气枪震源激发条件优化实验研究

Through manual pickup of seismic phases,the number of recording stations,the farthest observation distance of station and received energy are determined,then optimal operating condition processing software is developed to evaluate the excitation effect of operating conditions. The optimal operating conditions in the Mianhuatan Reservoir are determined using this software. They are: optimal water depth 25 m,airgun array sink depth 9m and airgun array size 7m × 7m. At the same time,accumulative stacking results for every 10 times are analyzed for 300 fixed-point excitations. It is concluded that the excitation effect shows a rapidly rising trend at 10 to 90 times stacking,a slowly rising trend at 100 to 150 times stacking,a rapidly rising trend at 160 to 240 times stacking,and a slowly rising trend at 250 to 300 times stacking. As the number of stacking increases,the propagation distance and the number of recording stations also increase gradually.     

利用人工重复震源进行地下介质结构及其变化研究的探索和进展???

在自然和人为活动的作用下,地球内部的介质会产生变化。通过分析来自重复地震、背景噪音和重复性人工震源等的地震波,研究地球介质的变化是近年来地震学研究的一个热点方向,这些研究为人类认识地震、火山等灾害的物理过程提供了重要的手段。本文介绍了过去10余年中我们在利用人工震源（尤其是大容量气枪震源）探究地下介质结构及其变化方面的研究进展,以期为今后类似的研究提供参考。本文首先介绍了不同类型震源性能的探索、数据处理方法等方面的研究进展和主要认识,最后也给出了关于下一步人工震源研究方向的思考。     

祁连山气枪主动震源浮台漂移钢索悬吊控制技术

针对地下介质动态变化监测研究中的信噪比、震源可重复性和波速精确测量等关键问题,利用大容量气枪作为主动震源,构建了一套高性能的主动源探测技术系统,该系统主要由气枪震源和信号接收部分组成。为了解决浮台偏离设定位置的问题 ,提出了浮台漂移控制技术。实验结果表明,该技术可以有效地解决气枪激发后浮台受到水流冲击作用而偏离设定位置的问题。本研究结果可为一定激发场地情况下的气枪主动震源重复探测工作所借鉴。     

An Experimental Study on Modulating the Large Volume Airgun Array Signals through Asynchronous Excitation

Large volume airgun arrays have been widely used in exploring and monitoring underground structures for nearly a decade. Nowadays, large volume airgun arrays adopt the synchronous excitation mode, and source characteristics are controlled by the source signal of a single airgun, which to some extent limits its application. In order to realize the asynchronous excitation of the airgun array, we developed a new firing system for the airgun array, and carried out a field experiment in the Binchuan Fixed Airgun Signal Transmission station to study the influences of the asynchronous excitation on the source signal. The experimental results show that:the newly developed airgun array firing system can ignite the airguns according to the setting time series with high precision. By designing the excitation time series, the asynchronous excitation can enhance the energy of airgun source signal at 3-5Hz, and reduce the energy of pressure pulse wave at 6-18Hz. The signal detection capability of the asynchronous excitation with time series mode is equivalent to the synchronous excitation.     

Numerical Simulation of the Binchuan Airgun Source Affected by Water Body

The numerical simulation of the influence of a reservoir water body on the Binchuan airgun source could provide a theoretical basis to analyze the data obtained from the active source detection and inversion of regional interior medium structures. Based on a medium model containing limited water body, we use the finite different method to simulate the effect of the water level, excitation energy and focal depth. The results show that the influence on the waveform amplitude caused by the water level changing is very large near the water body, and that a high water level or large amplitude change can have a larger effect. However, for stations beyond a certain epicentral distance, the influence will be weakened and kept stable. As for the Binchuan airgun source, amplitude fluctuation caused by the water level changing becomes very small(±0.05 times) after propagating a certain distance, so we can remove the influence of the water level changing by referring to the numerical simulation result. Wave amplitude increases linearly with the excitation energy and focal depth, therefore, the greater the energy and the deeper the focal depth, the better the effect of the excitation, and is more conducive in detecting remote and deep penetration underground structures.     

大容量气枪震源地震动衰减特性分析

为进一步加深对大容量气枪震源激发的地震波传播特性的认知,利用福建海陆多个气枪震源固定激发点重复激发的实验数据,通过线性叠加和仿真技术得到等效单次激发高信噪比速度和位移记录,然后利用不同震中距的位移峰值计算不同固定点气枪激发的等效震级,进而建立等效震级、震中距和速度峰值的衰减关系。结果表明:(1)震中距为0~270km时,大容量气枪单次激发得到的速度峰值为700~4nm/s,位移峰值为200~0.2nm;(2)总容量为8000 in~3的气枪震源P波等效震级为0.181~0.760,S波等效震级为0.294~0.832,总容量为12000 in~3的气枪震源P波等效震级为0.533~0.896,S波等效震级为0.611~0.946,气枪震源激发产生的S波能量大于P波能量,激发环境不同,激发效能相差较大;(3)速度峰值随等效震级增大而增大,随震中距增大而减小,P波速度峰值三分量中垂直分量最大,S波相反,其垂直分量最小,二者水平分量相近。研究结果可为定量判断气枪震源激发的地震波的传播能力以及利用气枪震源进行深部探测或监测的观测系统的设计提供重要依据。     

Attenuation Characteristics of Earthquake Ground Motion for Large Volume Airgun

In order to further deepen the understanding of seismic wave propagation characteristics induced by the large volume airgun source, experimental data from multiple fixed excitation points in Fujian Province were used to obtain the equivalent single excitation high signal-to-noise ratio velocity and displacement records through linear stacking and simulation techniques. Then the peak displacements of different epicentral distances were used to calculate the equivalent magnitude of the airgun source excitation at different fixed excitation points so as to establish the attenuation relationship between equivalent magnitude,epicenter distance and velocity peak. Our results show that:① Within 270 km of epicentral distance,for the large-volume airgun's single shot,the peak velocity range is about 700-4 nm/s,and the peak displacement range is about 200. 0-0. 2 nm;② The equivalent magnitude of the P-wave from the airgun source with a total capacity of 8,000 in 3 is 0. 181-0. 760,and the equivalent magnitude of the S-wave is 0. 294-0. 832. By contrast,the equivalent magnitude of the P-wave from the airgun source with a total capacity of 12,000 in 3 is 0. 533-0. 896,and the equivalent magnitude of the S-wave is 0. 611-0. 946. The S-wave energy is greater than the P-wave energy, and the excitation efficiency varies greatly with different excitation environment;③ The peak velocity increases with the equivalent magnitude,and decreases with the epicentral distance. The vertical component of the P-wave peak velocity is the largest among those three components,while the S-wave has the smallest vertical component and similar horizontal components. Hence,our research can provide an important basis for the quantitative judgment of the seismic wave propagation distance using the airgun and the design of the observation system in deep exploration or monitoring with airgun.     

A Comparative Study on the Excitation of Large Volume Airgun Source with Different Combinations in Hutubi, Xinjiang, China

In order to study the excitation of large-volume airgun source with different combinations in Hutubi, Xinjiang,China,we conducted a targeted experiment. The method of time-frequency analysis is used to study the signals recorded by a seismometer on the shore of the excited pool, and it is concluded that different gun combinations will lead to different frequency of bubble pulse signals. Besides, linear combination method is used to analyze the signal-to-noise ratios of signals excited by different gun combinations which was recorded by seismic stations around the airgun source. In order to improve the signal-to-noise ratios, it is more effective to increase the activation energy (the number of excited guns at the same time) than to stack the excited signals with smaller energy repeatedly.     

Comparative Study on Two Methods for Measuring Wave Velocity Change of Crustal Medium Based on Large Volume Airgun Excitation Data

This paper proposes the application of dynamic programming method to calculate the relative change of wave velocities and compares its similarities and differences with the cross-correlation delay estimation method based on interference. The results show that:①the trend of wave velocities obtained by cross-correlation method and dynamic programming method are consistent. Besides,it is considered that the calculated result using cross-correlation delay method is reliable.② Compared with the cross-correlation delay method,the calculated result of the dynamic programming method has a magnifying effect and is more sensitive to small disturbances.③ Under ideal conditions,the wave velocity change trend calculated by P-wave and S-wave phase should be consistent. In addition,the cross-correlation delay method is used to calculate the wave velocity change.Under appropriate conditions,the process of recovering from the suspected wave velocity before the M_L1. 1 earthquake near the airgun source can be observed.