An analysis of wave dissipation at the Hendijan mud coast, the Persian Gulf

Effects of non-rigid muddy bed on the wave climate at the Hendijan coast along the northwestern part of the Persian Gulf have been examined through field measurements and numerical wave transformation modeling. The field survey included measurements of wave characteristics at an offshore and a nearshore station, and mud sampling to obtain the thickness of the fluid mud layer and its rheological properties. Comparisons of wave spectra at the two stations show energy dissipation along the wave trajectory with higher dissipation in the wave period band around 6?s, because depending on the site a given frequency band tends to be more effective in wave–mud interaction. Dissipation induced by the non-rigid bed is introduced into the REF/DIF wave transformation model through the application of viscoelastic constitutive equations for fluid mud. Numerical outputs of the nearshore wave height, for which the viscoelastic parameters included in the model were obtained independently from oscillatory frequency-sweep tests, are found to be comparable with measured values at the nearshore station. This implies that the model is useful for estimating the design wave conditions in the study area.     

Hydrodynamic response of a fringing coral reef to a rise in mean sea level

Ningaloo Reef, located along the northwest coast of Australia, is one of the longest fringing coral reefs in the world extending ~300 km. Similar to other fringing reefs, it consists of a barrier reef ~1–6 km offshore with occasional gaps, backed by a shallow lagoon. Wave breaking on the reef generates radiation stress gradients that produces wave setup across the reef and lagoon and mean currents across the reef. A section of Ningaloo Reef at Sandy Bay was chosen as the focus of an intense 6-week field experiment and numerical simulation using the wave model SWAN coupled to the three-dimensional circulation model ROMS. The physics of nearshore processes such as wave breaking, wave setup and mean flow across the reef was investigated in detail by examining the various momentum balances established in the system. The magnitude of the terms and the distance of their peaks from reef edge in the momentum balance were sensitive to the changes in mean sea level, e.g. the wave forces decreased as the mean water depth increased (and hence, wave breaking dissipation was reduced). This led to an increase in the wave power at the shoreline, a slight shift of the surf zone to the lee side of the reef and changes in the intensity of the circulation. The predicted hydrodynamic fields were input into a Lagrangian particle tracking model to estimate the transport time scale of the reef-lagoon system. Flushing time of the lagoon with the open ocean was computed using two definitions in renewal of semi-enclosed water basins and revealed the sensitivity of such a transport time scale to methods. An increase in the lagoon exchange rate at smaller mean sea-level rise and the decrease at higher mean sea-level rise was predicted through flushing time computed using both methods.     

Human impacts on large benthic foraminifers near a densely populated area of Majuro Atoll, Marshall Islands

Human impacts on sand-producing, large benthic foraminifers were investigated on ocean reef flats at the northeast Majuro Atoll, Marshall Islands, along a human population gradient. The densities of dominant foraminifers Calcarina and Amphistegina declined with distance from densely populated islands. Macrophyte composition on ocean reef flats differed between locations near sparsely or densely populated islands. Nutrient concentrations in reef-flat seawater and groundwater were high near or on densely populated islands. δ¹⁵N values in macroalgal tissues indicated that macroalgae in nearshore lagoons assimilate wastewater-derived nitrogen, whereas those on nearshore ocean reef flats assimilate nitrogen from other sources. These results suggest that increases in the human population result in high nutrient loading in groundwater and possibly into nearshore waters. High nutrient inputs into ambient seawater may have both direct and indirect negative effects on sand-producing foraminifers through habitat changes and/or the collapse of algal symbiosis.     

A comparison of reef‐protected environments in ­Western Australia: the central west and Ningaloo coasts

Variability in the regional setting and morphology of cuspate forelands on the west coast of Western Australia is examined in this paper. In accordance with this aim, principal differences in the geologic and geomorphologic setting of three prominent sites on the west coast were established and their association with historical changes and contemporary oceanographic processes was examined. The cuspate forelands investigated are Jurien Bay, Winderabandi Point and Turquoise Bay. The most significant differences in geologic setting are associated with the structure and location of an extensive offshore reef system. Morphologically, the reef alters from south to north, changing from a discontinuous ridge parallel to the shore along the central west coast, to a nearly continuous fringing reef at Ningaloo. The reefs vary in distance from the shore, being farthest in the south and closest in the north and they impound a series of inshore basins, or lagoons. The deeper southern basins are dominated by locally generated wind waves and wind‐generated currents. The shallower northern basins are most markedly affected by tidal currents and wave pumping across the reef flats. The large cuspate foreland at Jurien on the central west coast has undergone shoreline configuration change in response to changing phases of storminess as well as in response to a change in focus for sediment deposition as a result of offshore reef erosion. At Winderabandi Point on the Ningaloo coast, relict Pleistocene limestone has provided the focus for sedimentation and morphology has been controlled by a balance in refracted wave energy and nearshore currents driven by tidal and wave set‐up variability. At Turquoise Bay, where the lagoonal basin is most shallow and narrow, the morphology of the foreland suggests that it may at some stage have been migratory, but its present asymmetrical shape is maintained by strong northerly longshore drift and strong currents exiting the lagoon through a nearby gap in the reef crest. Fundamental differences between the two coastal regions include the structure of the offshore reef, processes driving flow of water within the lagoons and the role of storminess in evolution of coastal landforms. Although many questions regarding storm surge dynamics and landform change remain unanswered, this research provides a significant contribution to the understanding of the evolution of morphological systems in low‐wave‐energy protected environments. Copyright © 2000 John Wiley & Sons, Ltd.     

Field observations of wave refraction and propagation pathways on coral reef platforms

Field experiments were conducted to investigate the refraction and propagation of ocean waves across two coral reef platforms in the Maldives, central Indian Ocean. A total of seven pressure sensors were deployed on each reef to quantify temporal and spatial variations in wave characteristics across the platform surfaces. Directional wave properties were calculated from high frequency (2 Hz) wave and current records obtained at two locations on each reef and corroborate theoretically predicted propagation pathways derived from an analytical wave refraction model. Results demonstrate that reef geometry critically controls the refraction and propagation behaviour of incident swell across the reef structures. Differences in the magnitude of refraction (approximately 57° and 14°) observed on each reef can be attributed to variations in platform shape and orientation to incident waves. Results demonstrate that reef flat wave patterns define the segmentation of platform surfaces into distinctive high and low wave energy zones. Furthermore, wave focussing has been identified as a major mechanism controlling the transformation of wave energy across the reefs. Results provide the first field‐based validation of wave refraction and convergence on coral reefs and have significant implications for sedimentation processes and the formation of platform deposits. Reef configurations which promote marked wave convergence are more likely to retain sediment on the reef surface, whereas platforms that induce less refraction and changes in the direction of incident waves have a higher potential for the off‐reef evacuation of sediment over leeward reef margins. Results of wave measurements substantiate such projections and provide a first order explanation for the existence and absence of a coral cay on the two study reefs. The study presents empirical evidence of wave refraction and convergence on coral reefs and establishes a baseline for future investigations of hydrodynamic process controls on platform sedimentation and island formation. Copyright © 2012 John Wiley & Sons, Ltd.     

Optimizing spectral wave estimates with adjoint-based sensitivity maps

A discrete numerical adjoint has recently been developed for the stochastic wave model SWAN. In the present study, this adjoint code is used to construct spectral sensitivity maps for two nearshore domains. The maps display the correlations of spectral energy levels throughout the domain with the observed energy levels at a selected location or region of interest (LOI/ROI), providing a full spectrum of values at all locations in the domain. We investigate the effectiveness of sensitivity maps based on significant wave height (H _s ) in determining alternate offshore instrument deployment sites when a chosen nearshore location or region is inaccessible. Wave and bathymetry datasets are employed from one shallower, small-scale domain (Duck, NC) and one deeper, larger-scale domain (San Diego, CA). The effects of seasonal changes in wave climate, errors in bathymetry, and multiple assimilation points on sensitivity map shapes and model performance are investigated. Model accuracy is evaluated by comparing spectral statistics as well as with an RMS skill score, which estimates a mean model–data error across all spectral bins. Results indicate that data assimilation from identified high-sensitivity alternate locations consistently improves model performance at nearshore LOIs, while assimilation from low-sensitivity locations results in lesser or no improvement. Use of sub-sampled or alongshore-averaged bathymetry has a domain-specific effect on model performance when assimilating from a high-sensitivity alternate location. When multiple alternate assimilation locations are used from areas of lower sensitivity, model performance may be worse than with a single, high-sensitivity assimilation point.     

A study of dissipation of wind-waves by mud at Cassino Beach,Brazil: Prediction and inversion

The impact of a non-rigid seafloor on the wave climate at Cassino Beach, Brazil, May–June 2005 is studied using field measurements and a numerical wave model. The measurements consist of wave data at four locations; rheology and mud thickness from grab samples; and an estimate of the horizontal distribution of mud based on echo-soundings. The dissipation of waves by a non-rigid bottom is represented in the wave model by treating the mud layer as a viscous fluid. Applied for 431 time periods, the model without this type of dissipation has a strong tendency to overpredict nearshore wave energy, except during a period of large storm waves. Two model variations which include this dissipation have a modest tendency to underpredict the nearshore wave energy. An inversion methodology is developed and applied to infer an alternate mud distribution which, when used with the wave model, yields the observed waveheights.     

Longshore variations in nearshore wave processes at magilligan point,northern ireland

Magilligan Point is a recurved cuspate foreland at the mouth of Lough Foyle. Two wave regimes intersect in the estuary mouth and the manner of their interplay controls shoreline changes. Ocean swell waves from the N and NE are refracted around the recurve, losing both height and energy longshore. Width of the surf zone decreases and waves tend to steepen, although both these changes and wave refraction owe something to nearshore geometry. Angle of wave approach becomes more acute and a westerly flowing longshore current moves sand S and SW along the beach. Estuary waves from the S and SW are wind-driven with high-frequencies and steepnesses. They generate a northeasterly current which returns material N, but dies out as the waves become obliterated by nearshore attenuation and breaking of swell. It is possible to identify a time-averaged null-point where shoreline wave power is balanced, although this tends to shift over short periods causing rapid morphological changes. The existence of two independent, but counteractive cells ensures the long-term maintenance of the foreland, without requiring major or continuous supplies of fresh sediment.     

Coral Ba/Ca records of sediment input to the fringing reef of the southshore of Moloka’i, Hawai’i over the last several decades

The fringing reef of southern Moloka’i is perceived to be in decline because of land-based pollution. In the absence of historical records of sediment pollution, ratios of coral Ba/Ca were used to test the hypothesis that sedimentation has increased over time. Baseline Ba/Ca ratios co-vary with the abundance of red, terrigenous sediment visible in recent imagery. The highest values at One Ali’i are near one of the muddiest parts of the reef. This co-varies with the lowest growth rate of all the sites, perhaps because the upstream Kawela watershed was historically leveed all the way to the nearshore, providing a fast-path for sediment delivery. Sites adjacent to small, steep watersheds have ∼decadal periodicities whereas sites adjacent to mangrove forests have shorter-period fluctuations that correspond to the periodicity of sediment transport in the nearshore, rather than the watershed. All four sites show a statistically significant upward trend in Ba/Ca.     

Wave-forced dynamics in the nearshore river mouths,and swash zones

The role of wave forcing on the main hydro-morphological dynamics evolving in the shallow waters of the nearshore and at river mouths is analyzed. Focus is mainly on the cross-shore dynamics that evolve over mildly sloping barred, dissipative sandy beaches from the storm up to the yearly timescale, at most. Local and non-local mechanisms as well as connections across three main inter-related subsystems of the nearshore – the region of generation and evolution of nearshore bars, river mouths and the swash zone – are analyzed. The beach slope is a major controlling parameter for all nearshore dynamics. A local mechanism that must be properly described for a suitable representation of wave-forced dynamics of all such three subsystems is the proper correlation between orbital velocity and sediment concentration in the bottom boundary layer; while specific dynamics are the wave–current interaction and bar generation at river mouths and the sediment presuspension at the swash zone. Fundamental non-local mechanisms are both infragravity (IG) waves and large-scale horizontal vortices (i.e. with vertical axes), both influencing the hydrodynamics, the sediment transport and the seabed morphology across the whole nearshore. Major connections across the three subsystems are the upriver propagation of IG waves generated by breaking sea waves and swash–swash interactions, the interplay between the swash zone and along-river-flank sediment transport and the evolution of nearshore sandbars. © 2019 John Wiley & Sons, Ltd.     

Neural-network predictability experiments for nearshore sandbar migration

Cross-shore migratory behavior of nearshore sandbars is commonly studied with nearshore bathymetric-evolution models that represent underlying processes of hydrodynamics and sediment transport. These models, however, struggle to reproduce natural cross-shore sandbar behavior on timescales of a few days to weeks and have uncertain skill on longer scales of months to years. One particular concern for the use of models on prediction timescales that far exceed the timescale of the modeled processes is the exponential accumulation of errors in the nonlinear model equations. The relation between cross-shore sandbar migration, sandbar location and wave height has previously been demonstrated to be weakly nonlinear on timescales of several days, but it is unknown how this nonlinearity affects the predictability of long-term (months to years) cross-shore sandbar behavior. Here we study the role of nonlinearity in the predictability of sandbar behavior on timescales of a few days to several months with data-driven neural network models. Our analyses are based on over 5600 daily-observed cross-shore sandbar locations and daily-averaged wave forcings from the Gold Coast, Australia, and Hasaki, Japan. We find that neural network models are able to hindcast many aspects of cross-shore sandbar behavior, such as rapid offshore migration during storms, slower onshore return during quiet periods, seasonal cycles and annual to interannual offshore-directed trends. Although the relation between sandbar migration, sandbar location and wave height is nonlinear, sandbar behavior can be hindcasted accurately over the entire lifespan of the sandbars at the Gold Coast. Contrastingly, it is difficult to hindcast the long-term offshore-directed trends in sandbar behavior at Hasaki because of exponential accumulation of errors over time. Our results further reveal that during periods with low-wave conditions it becomes increasingly difficult to predict sandbar locations, while during high waves predictions become increasingly accurate.     

The influence of nearshore sand bank dynamics on shoreline evolution in a macrotidal coastal environment,Calais, northern France

Analyses of shoreline and bathymetry change near Calais, northern coast of France, showed that shoreline evolution during the 20th century was strongly related with shoreface and nearshore bathymetry variations. Coastal erosion generally corresponds to areas of nearshore seabed lowering while shoreline progradation is essentially associated with areas of seafloor aggradation, notably east of Calais where an extensive sand flat experienced seaward shoreline displacement up to more than 300 m between 1949 and 2000. Mapping of bathymetry changes since 1911 revealed that significant variation in nearshore morphology was caused by the onshore and alongshore migration of a prominent tidal sand bank that eventually welded to the shore. Comparison of bathymetry data showed that the volume of the bank increased by about 10×10⁷ m³ during the 20th century, indicating that the bank was acting as a sediment sink for some of the sand transiting alongshore in the coastal zone. Several lines of evidence show that the bank also represented a major sediment source for the prograding tidal flat, supplying significant amounts of sand to the accreting upper beach. Simulation of wave propagation using the SWAN wave model (Booij et al., 1999) suggests that the onshore movement of the sand bank resulted in a decrease of wave energy in the nearshore zone, leading to more dissipative conditions. Such conditions would have increased nearshore sediment supply, favoring aeolian dune development on the upper beach and shoreline progradation. Our results suggest that the onshore migration of nearshore sand banks may represent one of the most important, and possibly the primary mechanism responsible for supplying marine sand to beaches and coastal dunes in this macrotidal coastal environment.     

Air–water two-phase flow modeling of turbulent surf and swash zone wave motions

Wave breaking and wave runup/rundown have a major influence on nearshore hydrodynamics, morphodynamics and beach evolution. In the case of wave breaking, there is significant mixing of air and water at the wave crest, along with relatively high kinetic energy, so prediction of the free surface is complicated. Most hydrodynamic studies of surf and swash zone are derived from single-phase flow, in which the role of air is ignored. Two-phase flow modeling, consisting of both phases of water and air, may be a good alternative numerical modeling approach for simulating nearshore hydrodynamics and, consequently, sediment transport. A two-phase flow tool can compute more realistically the shape of the free surface, while the effects of air are accounted for. This paper used models based on two-dimensional, two-phase Reynolds-averaged Navier–Stokes equations, the volume-of-fluid surface capturing technique and different turbulence closure models, i.e., k–ε, k–ω and re-normalized group (RNG). Our numerical results were compared with the available experimental data. Comparison of the employed method with a model not utilizing a two-phase flow modeling demonstrates that including the air phase leads to improvement in simulation of wave characteristics, especially in the vicinity of the breaking point. The numerical results revealed that the RNG turbulence model yielded better predictions of nearshore zone hydrodynamics, although the k–ε model also gave satisfactory predictions. The model provides new insights for the wave, turbulence and means flow structure in the surf and swash zones.     

Effects of beach slope breaks on nearshore groundwater dynamics

Interactions between fresh groundwater and seawater affect significantly the nearshore pore water flow, which in turn influences the fate of nutrients and contaminants in coastal aquifers prior to discharge to the marine environment. Field investigations and numerical simulations were carried out to examine the groundwater dynamics in the intertidal zone of a carbonate sandy aquifer on the tropical island of Rarotonga, Cook Islands. The study site was featured by distinct cross‐shore slope breaks on the beach surface. Measured pore water salinities revealed different distributions under the influences of different beach profiles, inland heads, and tidal oscillations. Fresh groundwater was found to discharge around a beach slope break located in the middle area of the intertidal zone. The results indicate a strong interplay between the slope break beach morphology and tidal force in controlling the nearshore groundwater flow and solute transport. The fresh groundwater discharge location was largely determined by the beach morphology in combination with the tidal force. The nearshore groundwater flow can be very sensitive to beach slope breaks, which induce local circulation and flow instabilities. As slope breaks are a common feature of beaches around the world, these results have important, general implications for future studies of nutrients transport and transformations in nearshore aquifers and associated fluxes via submarine groundwater discharge.     

Evaluation of nearshore wave models in steep reef environments

To provide coastal engineers and scientists with a quantitative evaluation of nearshore numerical wave models in reef environments, we review and compare three commonly used models with detailed laboratory observations. These models are the following: (1) SWASH (Simulating WAves till SHore) (Zijlema et al. 2011), a phase-resolving nonlinear shallow-water wave model with added nonhydrostatic terms; (2) SWAN (Simulating WAve Nearshore) (Booij et al. 1999), a phase-averaged spectral wave model; and (3) XBeach (Roelvink et al. 2009), a coupled phase-averaged spectral wave model (applied to modeling sea-swell waves) and a nonlinear shallow-water model (applied to modeling infragravity waves). A quantitative assessment was made of each model’s ability to predict sea-swell (SS) wave height, infragravity (IG) wave height, wave spectra, and wave setup ( \( \overline{\eta} \) ) at five locations across the laboratory fringing reef profile of Demirbilek et al. (2007). Simulations were performed with the “recommended” empirical coefficients as documented for each model, and then the key wave-breaking parameter for each model (α in SWASH and γ in both SWAN and XBeach) was optimized to most accurately reproduce the observations. SWASH, SWAN, and XBeach were found to be capable of predicting SS wave height variations across the steep fringing reef profile with reasonable accuracy using the default coefficients. Nevertheless, tuning of the key wave-breaking parameter improved the accuracy of each model’s predictions. SWASH and XBeach were also able to predict IG wave height and spectral transformation. Although SWAN was capable of modeling the SS wave height, in its current form, it was not capable of modeling the spectral transformation into lower frequencies, as evident in the underprediction of the low-frequency waves.     

Time‐lapse seismic modelling of CO2 fluid substitution in the Devonian Redwater Reef,Alberta, Canada

Common shot ray tracing and finite difference seismic modelling experiments were undertaken to evaluate variations in the seismic response of the Devonian Redwater reef in the Alberta Basin, Canada after replacement of native pore waters in the upper rim of the reef with CO₂. This part of the reef is being evaluated for a CO₂ storage project. The input geological model was based on well data and the interpretation of depth‐converted, reprocessed 2D seismic data in the area. Pre‐stack depth migration of the ray traced and finite difference synthetic data demonstrate similar seismic attributes for the Mannville, Nisku, Ireton, Cooking Lake, and Beaverhill Lake formations and clear terminations of the Upper Leduc and Middle Leduc events at the reef margin. Higher amplitudes at the base of Upper‐Leduc member are evident near the reef margin due to the higher porosity of the foreslope facies in the reef rim compared to the tidal flat lagoonal facies within the central region of the reef. Time‐lapse seismic analysis exhibits an amplitude difference of about 14% for Leduc reflections before and after CO₂ saturation and a travel‐time delay through the reservoir of 1.6 ms. Both the ray tracing and finite difference approaches yielded similar results but, for this particular model, the latter provided more precise imaging of the reef margin. From the numerical study we conclude that time‐lapse surface seismic surveys should be effective in monitoring the location of the CO₂ plume in the Upper Leduc Formation of the Redwater reef, although the differences in the results between the two modelling approaches are of similar order to the effects of the CO₂ fluid replacement itself.     

Paleoenvironmental interpretations of Quaternary reef deposits based on comparisons of 10 selected modern and fossil larger foraminifera from the Ryukyu Islands, Japan

Abstract A new method for reconstructing depositional environments of larger foraminifera‐bearing limestones is proposed. First, depth and spatial distributions of empty tests of 10 foraminiferal taxa in a 1–2 mm size fraction were examined using 32 surface sediment samples collected from depths shallower than 200 m, located to the west of Miyako Island, Ryukyu Islands, northwest Pacific. Distributional ranges of empty tests in the 1–2 mm size fraction appear to be more limited than those including other size fractions in previous reports, partly because larger empty tests of each taxon are less easily transported than smaller ones. Multivariate analyses (Q‐mode cluster analysis and non‐metric multidimensional scaling ordination) based on binary (presence/absence) data of the 10 taxa delineate four sample groups, each of which corresponds to different depositional environments: nearshore zone/bay inlet; back‐reef to fore‐reef; outer shelf to shelf slope; and shelf slope distant from coral reefs. Next, these modern data were applied to reconstruct the depositional environment of a rock section distributed in the Shiratorizaki area (Irabu Island, Ryukyu Islands), which consists of larger foraminiferal limestone of the Pleistocene Ryukyu Group. Multivariate analyses were performed on the fossil plus the modern foraminiferal data to explore the possible relationship of the fossil associations with variations in modern associations, demonstrating that the fossil foraminiferal associations resemble the modern outer shelf associations. The modern analog technique was also applied to estimate paleobathymetry using fossil foraminiferal data. The results indicate that the section studied was deposited in outer shelf environments at depths between 53.5 and 98.6 m. These paleoenvironmental interpretations are consistent with previous studies based on sedimentary facies and the computer‐based expert system. The modern dataset and methods used in our work would be particularly useful for paleoenvironmental reconstructions of Quaternary reef and shelf carbonates along active margins of the northwest Pacific.     

Hindcast of breaking waves and its impact at an island sheltered coast,Karwar

Variability in the characteristics of depth-induced wave breakers along a non-uniform coastal topography and its impact on the morpho-sedimentary processes is examined at the island sheltered wave-dominated micro-tidal coast, Karwar, west coast of India. Waves are simulated using the coupled wind wave model, SWAN nested in WAVEWATCH III, forced by the reanalysis winds from different sources (NCEP/NCAR, ECMWF, and NCEP/CFSR). Impact of the wave breakers is evaluated through mean longshore current and sediment transport for various wave energy conditions across different coastal morphology. Study revealed that the NCEP/CFSR wind is comparatively reasonable in simulation of nearshore waves using the SWAN model nested by 2D wave spectra generated from WAVEWATCH III. The Galvin formula for estimating mean longshore current using the crest wave period and the Kamphuis approximation for longshore sediment transport is observed realistically at the sheltered coastal environment while the coast interacts with spilling and plunging breakers.