Submarine exhalative gold mineralization at the London-Virginia Mine,Buckingham County,Virginia

Low grade submarine exhalative gold mineralization occurs at the London-Virginia deposit in central Virginia Piedmont. The deposit consists of a series of localized but conformable units — basal garnetiferous-chlorite schist, magnetite schist, quartz-muscovite schist, ferruginous quartzite, and chlorite-biotite schist — which represent a mixture of submarine epiclastic volcanic debris and exhalative chemical sediments. Finely disseminated gold occurs dispersed with minor amounts of pyrite, sphalerite, chalcopyrite, galena, and tennantite in the ferruginous quartzite and quartz-muscovite schist. The deposit is believed to have formed by processes analogous to those currently active in the Atlantis II Deep of the Red Sea. Silicarich, hypersaline brines discharged through fractures in the sea floor and ponded in a local basin. Epiosodic influx of clastic debris and extensive deposition of hydrothermal silica diluted the concentration of sulfides and gold to produce a low-grade, siliceous mineralized zone. Emanation from the exhalative vent was terminated when the basin was capped by a lava flow. Subsequent regional greenschist grade metamorphism has recrystallized the silica into a granular quartzite and produced minor remobilization of the gold and sulfides.     

A petrographic and fluid inclusion comparison of silver-poor and silver-rich zinc-lead ores,N.E. Washington State

Many of the zinc-lead deposits of NE Washington State are poorly known examples of Mississippi Valley Type (MVT) mineralization. This study compares inclusion fluids from the Josephine Breccia ores with the later cross-cutting sulfide-bearing quartz veins. The breccia ores are cemented mainly by open space fillings of dolomite, sphalerite, quartz, galena, jasperoid and calcite. Replacement is of minor importance. Ore and gangue deposition occurred over the range 150–250 °C with most of the temperatures less than 200 °C. The aqueous brines typically contain 17–23 equivalent weight percent NaCl with often substantial amounts of Ca and/or Mg chlorides. Homogenization temperatures do not delineate any cooling or paragenetic sequence. The cross-cutting vein quartz contains CO₂-rich inclusions with overall densities usually less than 0.7 g/cc and homogenization temperatures from 250–325 °C. Sulfur isotope analyses yield two populations with the quartz vein ores being lighter (<13 permil CDT) than the average for the conformable ores. The later veins are not remobilized MVT sulfides but represent a separate, high-silver period of mineralization.     

Fluid evolution,wallrock alteration,and ore mineralization associated with the Rodalquilar epithermal gold-deposit in southeast Spain

At Rodalquilar gold mineralization is found in Late Tertiary volcanic rocks of the Sierra del Cabo de Gata and is related to a caldera collapse. Radial and concentric faults were preferred sites for gold deposition. Hydrothermal activity produced a specific alteration zoning around gold-bearing vein structures, grading from an innermost advanced argillic via an argillic into a more regionally developed propylitic zone. Advanced argillic alteration with silica, pyrophyllite, alunite, and kaolinite extends down to several hundred m indicating a hypogene origin. High-grade gold mineralization in vein structures is confined to the near-surface part of the advanced argillic alteration. Fine-grained gold is associated with hematite, jarosite, limonite, or silica. At a depth of about 120 m, the oxidic ore assemblage grades into sulfide mineralization with pyrite and minor chalcopyrite, covellite, bornite, enargite, and tennantite. Two types of fluids from different sources were involved in the hydrothermal system. Overpressured and hypersaline fluids of presumably magmatic origin initiated the hydrothermal system. Subsequent hydrothermal processes were characterized by the influx of low-salinity solutions of probable marine origin and by interactions between both fluids. Deep-reaching, advanced argillic alteration formed from high-salinity fluids with 20–30 equiv. wt% NaCl at about 225°C. Near-surface gold precipitation and silification are related to fluids with temperatures of about 175°C and 3–4 equiv. wt% NaCl. Gold was transported as Au(HS) ₂ ^– , and precipitation resulted from boiling with a concomitant decrease in temperature, pressure, and pH and an increase in fO₂. All features of the Rodalquilar gold deposit reveal a close relationship to acid-sulfate-type epithermal gold mineralization.     

Hydrothermal precipitates associated with bimodal volcanism in the Central Bransfield Strait,Antarctica

Polymetallic sulfide-sulfate mineralization enriched in Pb-Ag-As-Sb-Hg occurs in the Bransfield Strait, a late Tertiary-Quaternary marginal basin close to the Antarctic Peninsula. The mineralization is associated with bimodal volcanism and pelagic and volcaniclastic sediment in rifted continental crust. Hydrothermal precipitates have been recovered from two shallow (1,050–1,000 m water depth) submarine volcanoes (Hook Ridge and Three Sisters) in the Central Bransfield Strait. Mineralization at Hook Ridge consists of polymetallic sulfides, massive barite, and pyrite and marcasite crusts in semilithified pelagic and volcaniclastic sediment. Native sulfur commonly infills void space and cements the volcaniclastic sediment. The polymetallic sulfides are dominated by sphalerite with minor galena, enargite, tetrahedrite-tennantite, pyrite, chalcopyrite, and traces of orpiment cemented by barite and opal-A. The presence of enargite at Hook Ridge, the abundance of native sulfur, and the low Fe content of sphalerite indicate a high sulfur activity of the hydrothermal fluids responsible for mineralization. The sulfur isotopic composition of Hook Ridge precipitates documents the complexity of the sulfur sources in this hydrothermal system with variable influence of biological activity and possibly magmatic contributions. Homogenization temperatures and salinities of fluid inclusions in barite and opal-A suggest that boiling may have affected the hydrothermal fluids during their ascent. The discovery of massive barite-silica precipitates at another shallow marine volcano (Three Sisters volcano) attests to the potential for hydrothermal mineralization at other volcanic edifices in the area. The characteristics of the mineralization in the Bransfield Strait with rifting of continental crust, the presence of bimodal volcanism, including highly evolved felsic volcanic rocks, the association with sediments, and the Pb-Ag-As-Sb-Hg enrichment are similar to the setting of massive sulfide deposits in the Okinawa Trough, and distinct from those of sediment-dominated hydrothermal systems such as Escanaba Trough, Middle Valley, and Guaymas Basin. The geological setting of the Bransfield Strait is also broadly similar to that of some of the largest volcanogenic massive sulfide deposits in the ancient record, such as the Iberian Pyrite Belt.Editorial handling: B. Lehmann     

Preliminary magnetostratigraphic dating of Paleogene lacustrine sediments from the Shandong Province, East China

A detailed magnetostratigraphic and rock magnetic study was conducted on Tertiary lacustrine/fluvial sediments from Jiyang, Shandong, East China. High temperature susceptibility variation and thermal demagnetization show that magnetite is the main magnetic remanence carrier. The characteristic remanent magnetization (ChRM) was isolated above 150 °C by thermal demagnetization, and a detailed magnetic polarity sequence was established. The lacustrine/fluvial sediments were dated from polarity chron C18n.1r to polarity chron C15n, i.e., within the interval 39.631–34.655 Ma. The results of this study indicate the likelihood that either no hydrocarbon-bearing fluids were present after 34.655 Ma or, if there was any such fluid flow, the fluids must have gone through the section very quickly, without having any significant influence on the magnetic signal.     

Modeling outflow from the Ernest Henry Fe oxide Cu–Au deposit: implications for ore genesis and exploration

The Ernest Henry Fe oxide Cu–Au (IOCG) deposit (>ca. 1.51 Ga) is hosted by breccia produced during the waning stages of an evolving hydrothermal system that formed a number of tens of metres to a kilometre scale, pre- and syn-ore alteration halos, although no demonstrable patterns have been attributed to fluids expelled through the outflow zones. However, the recognition of a population of hypersaline fluid inclusions representing the ‘spent’ fluids after Cu–Au deposition at Ernest Henry provides the basis to model the geochemical characteristics of the deposit's outflow zones. Geochemical modeling at 300 °C was undertaken at both high and low fluid/rock ratios via FLUSH models involving three host rock types: (1) granite, (2) calc–silicate rock, and (3) graphitic schist. In models run at high fluid/rock ratios, all rock types are essentially fluid-buffered, and produce an albite–quartz–hematite–barite-rich assemblage, although in low fluid–rock environments, the pH, redox, and geochemical character of the host rock exerts a greater influence on the mineralogy of the alteration assemblages (e.g., andradite, Fe–chlorite, and magnetite). Significant sulphide mineralization was predicted in graphitic schist where sphalerite occurred in both low- and high-porosity models, which indicates the possibility of an association between high-temperature IOCG mineralization and lower temperature base metal mineralization.Cooling experiments (from 300 to 100 °C) using the ‘spent fluids’ predict early high-T (300–200 °C) Na-, Ca-, Fe-, and Mn-rich, magnetite-bearing hydrothermal associations, whereas with cooling to below 200 °C, and with progressive fluid–rock interaction, the system produces rhodochrosite-bearing, hematite–quartz–muscovite–barite-rich assemblages. These results show that the radical geochemical and mineralogical changes associated with cooling and progressive fluid influx are likely to be accompanied by major transformations in the geophysical expression (e.g., spectral and magnetic character) of the alteration in the outflow zone, and highlight the potential link between magnetite- and hematite-bearing IOCG hydrothermal systems.     

Hydrothermal evolution of the Sar-Cheshmeh porphyry Cu–Mo deposit, Iran: Evidence from fluid inclusions

The Sar-Cheshmeh porphyry Cu–Mo deposit is located in Southwestern Iran (65 km southwest of Kerman City) and is associated with a composite Miocene stock, ranging in composition from diorite through granodiorite to quartz-monzonite. Field observations and petrographic studies demonstrate that the emplacement of the Sar-Cheshmeh stock took place in several pulses, each with associated hydrothermal activity. Molybdenum was concentrated at a very early stage in the evolution of the hydrothermal system and copper was concentrated later. Four main vein Groups have been identified: (I) quartz+molybdenite+anhydrite±K-feldspar with minor pyrite, chalcopyrite and bornite; (II) quartz+chalcopyrite+pyrite±molybdenite±calcite; (III) quartz+pyrite+calcite±chalcopyrite±anhydrite (gypsum)±molybdenite; (IV) quartz±calcite±gypsum±pyrite±dolomite. Early hydrothermal alteration produced a potassic assemblage (orthoclase-biotite) in the central part of the stock, propylitic alteration occurred in the peripheral parts of the stock, contemporaneously with potassic alteration, and phyllic alteration occurred later, overprinting earlier alteration. The early hydrothermal fluids are represented by high temperature (350–520 °C), high salinity (up to 61 wt% NaCl equivalent) liquid-rich fluid inclusions, and high temperature (340–570 °C), low-salinity, vapor-rich inclusions. These fluids are interpreted to represent an orthomagmatic fluid, which cooled episodically; the brines are interpreted to have caused potassic alteration and deposition of Group I and II quartz veins containing molybdenite and chalcopyrite. Propylitic alteration is attributed to a liquid-rich, lower temperature (220–310 °C), Ca-rich, evolved meteoric fluid. Influx of meteoric water into the central part of the system and mixing with magmatic fluid produced albitization at depth and shallow phyllic alteration. This influx also caused the dissolution of early-formed copper sulphides and the remobilization of Cu into the sericitic zone, the main zone of the copper deposition in Sar-Cheshmeh, where it was redeposited in response to a decrease in temperature.     

P–T conditions of mineralization in the Jonnagiri granitoid-hosted gold deposit, eastern Dharwar Craton, southern India: Constraints from fluid inclusions and chlorite thermometry

Gold mineralization at Jonnagiri, Dharwar Craton, southern India, is hosted in laminated quartz veins within sheared granodiorite that occur with other rock units, typical of Archean greenstone–granite ensembles. The proximal alteration assemblage comprises of muscovite, plagioclase, and chlorite with minor biotite (and carbonate), which is distinctive of low- to mid-greenschist facies. The laminated quartz veins that constitute the inner alteration zone, contain muscovite, chlorite, albite and calcite. Using various calibrations, chlorite compositions in the inner and proximal zones yielded comparable temperature ranges of 263 to 323 °C and 268 to 324 °C, respectively. Gold occurs in the laminated quartz veins both as free-milling native metal and enclosed within sulfides. Fluid inclusion microthermometry and Raman spectroscopy in quartz veins within the sheared granodiorite in the proximal zone and laminated auriferous quartz veins in inner zone reveal the existence of a metamorphogenic aqueous–gaseous (H₂O–CO₂–CH₄ + salt) fluid that underwent phase separation and gave rise to gaseous (CO₂–CH₄), low saline (~ 5 wt.% NaCl equiv.) aqueous fluids. Quartz veins within the mylonitized granodiorites and the laminated veins show broad similarity in fluid compositions and P–T regime. Although the estimated P–T range (1.39 to 2.57 kbar at 263 to 323 °C) compare well with the published P–T values of other orogenic gold deposits in general, considerable pressure fluctuation characterize gold mineralization at Jonnagiri. Factors such as fluid phase separation and fluid–rock interaction, along with a decrease in f(O₂), were collectively responsible for gold precipitation, from an initial low-saline metamorphogenic fluid. Comparison of the Jonnagiri ore fluid with other lode gold deposits in the Dharwar Craton and major granitoid-hosted gold deposits in Australia and Canada confirms that fluids of low saline aqueous–carbonic composition with metamorphic parentage played the most dominant role in the formation of the Archean lode gold systems.     

Actively forming Kuroko-type volcanic-hosted massive sulfide (VHMS) mineralization at Iheya North,Okinawa Trough,Japan

Modern seafloor hydrothermal systems provide important insights into the formation and discovery of ancient volcanic-hosted massive sulfide (VHMS) deposits. In 2010, Integrated Ocean Drilling Program (IODP) Expedition 331 drilled five sites in the Iheya North hydrothermal field in the middle Okinawa Trough back-arc basin, Japan. Hydrothermal alteration and sulfide mineralization is hosted in a geologically complex, mixed sequence of coarse pumiceous volcaniclastic and fine hemipelagic sediments, overlying a dacitic to rhyolitic volcanic substrate. At site C0016, located adjacent to the foot of the actively venting North Big Chimney massive sulfide mound, massive sphalerite-(pyrite-chalcopyrite ± galena)-rich sulfides were intersected (to 30.2% Zn, 12.3% Pb, 2.68% Cu, 33.1 ppm Ag and 0.07 ppm Au) that strongly resemble the black ore of the Miocene-age Kuroko deposits of Japan. Sulfide mineralization shows clear evidence of formation through a combination of surface detrital and subsurface chemical processes, with at least some sphalerite precipitating into void space in the rock. Volcanic rocks beneath massive sulfides exhibit quartz-muscovite/illite and quartz-Mg-chlorite alteration reminiscent of VHMS proximal footwall alteration associated with Kuroko-type deposits, characterized by increasing MgO, Fe/Zn and Cu/Zn with depth. Recovered felsic footwall rocks are of FII to FIII affinity with well-developed negative Eu anomalies, consistent with VHMS-hosting felsic rocks in Phanerozoic ensialic arc/back-arc settings worldwide.Site C0013, ∼100 m east of North Big Chimney, represents a likely location of recent high temperature discharge, preserved as surficial coarse-grained sulfidic sediments (43.2% Zn, 4.4% Pb, 5.4% Cu, 42 ppm Ag and 0.02 ppm Au) containing high concentrations of As, Cd, Mo, Sb, and W. Near surface hydrothermal alteration is dominated by kaolinite and muscovite with locally abundant native sulfur, indicative of acidic hydrothermal fluids. Alteration grades to Mg-chlorite dominated assemblages at depths of >5 mbsf (metres below sea floor). Late coarse-grained anhydrite veining overprints earlier alteration and is interpreted to have precipitated from down welling seawater as hydrothermal activity waned. At site C0014, ∼350 m farther east, hydrothermal assemblages are characterized by illite/montmorillonite, with Mg-chlorite present at depths below ∼30 mbsf. Recovered lithologies from distal, recharge site C0017 are unaltered, with low MgO, Fe₂O₃ and base metal concentrations.Mineralization and alteration assemblages are consistent with the Iheya North system representing a modern analogue for Kuroko-type VHMS mineralization. Fluid flow is focussed laterally along pumiceous volcaniclastic strata (compartmentalized between impermeable hemipelagic sediments), and vertically along faults. The abundance of Fe-poor sphalerite and Mg-rich chlorite (clinochlore/penninite) is consistent with the lower Fe budget, temperature and higher oxidation state of felsic volcanic-hosted hydrothermal systems worldwide compared to Mid Ocean Ridge black smoker systems.     

东沙海域浅层沉积物硫化物分布特征及其与天然气水合物的关系

对南海东沙海域浅层沉积物中硫化物的含量进行了分析,结果表明,沉积物中硫化物的含量与沉积物顶空气甲烷含量有密切的关系,在存在顶空气甲烷高异常的沉积物岩心中,沉积物中硫化物含量明显高于无甲烷异常的沉积物岩心,且随层位深度的增加,其含量明显增大,存在显著的变化梯度带。碎屑矿物鉴定结果表明,沉积物中硫化物主要以黄铁矿的形式存在。浅层沉积物中高含量的硫化物与天然气水合物分解形成的甲烷流有直接的关系,反映了下部沉积物中可能存在天然气水合物。     

Reconstruction of the hydrothermal history of the Cu–Ag vein-type mineralisation at Dikulushi, Kundelungu foreland, Katanga, D.R. Congo

The Kundelungu foreland, north of the Lufilian arc in the Democratic Republic of Congo, contains a number of various vein-type and stratiform copper mineralisations. The geodynamic context and metallogenesis of these mineral occurrences remain enigmatic. Currently, the vein-type Cu–Ag ore deposit at Dikulushi is the most significant deposit in the region. Mineralisation at Dikulushi comprises two major styles: 1) a polysulphide assemblage (Zn–Pb–Fe–Cu–As) within brecciated rocks along an anticlinal closure; and 2) a vein-hosted Cu–Ag assemblage. Petrographic and fluid inclusion studies indicate that the early Zn–Pb–Fe–Cu–As assemblage formed from a high-salinity Ca–Na–Cl fluid of modest temperature (135–172 °C). The later, economically more significant vein-related Cu–Ag mineralisation formed from intermediate salinity, lower temperature (46–82 °C) Na–Cl fluids. Weathering of the sulphide minerals resulted in a supergene enrichment with the formation of secondary Cu-minerals.     

Predicted equilibrium constants for solid and aqueous selenium species to 300 °C: applications to selenium-rich mineral deposits

In this study, an attempt has been made to assess aqueous speciation of selenium and solubility product constants of common selenides at elevated temperatures (up to 300 °C) by using various extrapolation methods. This study predicts that reduced selenium species are dominant species in many geological processes even under relatively oxidized conditions such as those dictated by the magnetite–hematite buffer. On the basis of extrapolated equilibrium constants and solubility product constants for common Se-bearing mineral phases, critical ∑Se/∑S ratios (molal ratios) in mineralizing fluids are proposed for independent selenium mineralization. The minimum ∑Se/∑S ratios in mineralizing fluids for independent selenium mineralization should be at least 10⁻⁶, 10⁻⁵ and 10⁻⁴ at 100, 200 and 300 °C, respectively. For giant independent selenium deposits such as the La'erma and Qiongmo Au–Se deposits in the western Qingling mountains, and Yutangba Se deposits in Hubei Province, China, the mineralizing fluids have reached much higher ∑Se/∑S ratios ranging from 10⁻¹ to 10⁻³ at 200 °C. This study also suggests that the equilibrium assemblage of pyrite–ferroselite among the common ore minerals requires the highest ∑Se/∑S ratios in mineralizing fluids, followed in decreasing order by the assemblages of stibnite–antimonselite, galena–clausthalite, cinnabar–tiemannite, and acanthite/argentite–naumannite. The assemblage of pyrite–ferroselite can also be formed under relatively oxidizing conditions where [∑H₂Se]/[∑H₂S] ratios can be high enough for the formation of independent ferroselite.     

Petrology,Geochemistry, and Fluid Inclusion Microthermometry of Sphalerite from the Laloki and Federal Flag Strata‐Bound Massive Sulfide Deposits,Papua New Guinea: Implications for Gold Mineralization

The Laloki and Federal Flag deposits are two of the many (over 45) polymetallic massive sulfide deposits that occur in the Astrolabe Mineral Field, Papua New Guinea. New data of the mineralogical compositions, mineral textures, and fluid inclusion studies on sphalerite from Laloki and Federal Flag deposits were investigated to clarify physiochemical conditions of the mineralization at both deposits. The two deposits are located about 2 km apart and they are stratigraphically hosted by siliceous to carbonaceous claystone and rare gray chert of Paleocene–Eocene age. Massive sulfide ore and host rock samples were collected from each deposit for mineralogical, geochemical, and fluid inclusion studies. Mineralization at the Laloki deposit consists of early‐stage massive sulfide mineralization (sphalerite‐barite, chalcopyrite, and pyrite–marcasite) and late‐stage brecciation and remobilization of early‐stage massive sulfides that was accompanied by late‐stage sphalerite mineralization. Occurrence of native gold blebs in early‐stage massive pyrite–marcasite‐chalcopyrite ore with the association of pyrrhotite‐hematite and abundant planktonic foraminifera remnants was due to reduction of hydrothermal fluids by the reaction with organic‐rich sediments and seawater mixing. Precipitation of fine‐grained gold blebs in late‐stage Fe‐rich sphalerite resulted from low temperature and higher salinity ore fluids in sulfur reducing conditions. In contrast, the massive sulfide ores from the Federal Flag deposit contain Fe‐rich sphalerite and subordinate sulfarsenides. Native gold blebs occur as inclusions in Fe‐rich sphalerite, along sphalerite grain boundaries, and in the siliceous‐hematitic matrix. Such occurrences of native gold suggest that gold was initially precipitated from high‐temperature, moderate to highly reduced, low‐sulfur ore fluids. Concentrations of Au and Ag from both Laloki and Federal Flag deposits were within the range (<10 ppm Au and <100 ppm Ag) of massive sulfides at a mid‐ocean ridge setting rather than typical arc‐type massive sulfides. The complex relationship between FeS contents in sphalerite and gold grades of both deposits is probably due to the initial deposition of gold on the seafloor that may have been controlled by factors such as Au complexes, pH, and fO₂ in combination with temperature and sulfur fugacity.     

Volcanic stratigraphy, structural controls, and mineralization in the san cristobal Ag–Zn–Pb deposit, southern bolivia

The Late Miocene San Cristobal Ag–Zn–Pb deposit represents syngenetic and epigenetic mineralization with low- and high-sulfidation characteristics. Rocks in the deposit are characterized by barren dacitic ring fracture domes, mineralized resurgent rhyodacite domes, strongly altered and mineralized tuffaceous lacustrine sedimentary rocks, and an extensive crystal-lithic tuff debris apron. The ore body is hosted by intracauldron sedimentary and volcanic rocks and genetically associated breccias. Fluid inclusion data suggest that silver, lead, and zinc were transported as chloride complexes and precipitated by cooling in veins from <5 wt.% NaCl eq. fluids at 170–215 °C. Silver that was spatially, and perhaps temporally, associated with an episode of rhyodacite resurgence may have been transported as a chloride complex and precipitated by increased H₂S activity or increased fluid pH. Although San Cristobal represents a major silver resource, the occurrence of stratiform wurtzite and sphalerite in cauldron-hosted sedimentary rocks represents a syngenetic component of mineralization that is very rare in continental caldera-associated epithermal deposits, which contributes to San Cristobal's significance as a zinc resource.     

Geological context,mineralization, and timing of the Juramento sediment-hosted stratiform copper–silver deposit,Salta district,northwestern Argentina

The Juramento deposit in northwestern Argentina exhibits several readily visible general characteristics of sediment-hosted stratiform copper (SSC) mineralization. It consists of fine-grained disseminated base-metal sulfides within marine to lacustrine graybeds (the basal whitish Late Cretaceous Lecho Sandstone and shallow-water carbonates of the overlying Maastrichtian Yacoraite Formation) that overlie a thick sequence of redbeds (the Pirgua Subgroup). The property has been examined and drilled in three successive exploration programs as a possible analog of world-class mineralization in the copperbelts of central Africa and the Kupferschiefer. The present report provides specific field and laboratory results that confirm the classification as SSC-type mineralization. The host graybeds are the basal sandstone and overlying oolitic and stromatolitic units of the Yacoraite Formation, which are shown from textural studies to be carbonaceous and to have initially contained very fine-grained, disseminated, syndiagenetic pyrite. These sediments would have been sufficiently porous and permeable in early diagenetic time to allow an infiltration of metalliferous fluids from the underlying redbeds, resulting in the observed progressive replacement of in situ pyrite by common base-metal sulfides (sphalerite, galena, argentiferous tetrahedrite, and copper-rich sulfides: first chalcopyrite, then bornite, and finally chalcocite). Sulfur isotope analyses indicate that a portion of the sulfur of ore-stage sulfides is isotopically heavier than that of pyrite, possibly due to a contribution from associated gypsum. Ore-stage sulfides are zoned vertically and obliquely through the mineralized zones, from cupriferous sulfides at low stratigraphic levels to lead- and zinc-rich mineralization above, with unreplaced pyrite remaining within upper Yacoraite strata. The zoned sulfides and their replacement textures, the peneconformable configuration of the mineralized zones, and the position of ore-stage mineralization adjacent to a stratigraphically defined redox transition from redbeds upward into graybeds indicate an overprint of copper (and accompanying ore-stage metals) on originally pyritic graybeds. The influx of ore-stage metals, presumably in an oxidized low-temperature brine, terminated with a silicification event that effectively sealed the host carbonates. These observations and the overall genetic interpretation are consistent with the general deposit-scale genetic model for early diagenetic SSC mineralization. The regional geologic context is also consistent with its classification as a SSC deposit: It is hosted by post-oxyatmoversion sediments and was formed in association with evaporites at a low paleolatitude in a major intracontinental rift system.     

Overburden geochemistry related to W-Cu-Mo mineralization at Sisson Brook, New Brunswick, Canada: An example of short- and long-distance glacial dispersal

In 1982 and 1983 a surficial geology and overburden geochemistry survey was carried out on the Sisson Brook Mining Licence in York County, about 55 km northwest of Fredericton, New Brunswick, Canada.On the Sisson Brook Mining Licence three zones of W-Mo-Cu mineralization have been outlined; Zones I and II contain mainly wolframite with chalcopyrite and pyrrhotite, whereas Zone III has mainly scheelite and molybdenite.The glacial history of the area was studied during 1982 and 1983 to provide a framework for interpreting the geochemical results. Ice movement varied from 160° ± 10° towards the south during the Main Bantalor phase (maximum ≈ 13,500 y.B.P.) to 130° ± 10° toward the southeast during the Late Bantalor phase. Rapid changes in dominant pebble lithologies occur immediately upon crossing bedrock contacts. This suggests a very short distance of transport on the property. The glacier, butted against the Nashwaak Ridge, quickly sheared bedrock debris up into the body of the ice by compressive flow. Upon melting, some of this debris was deposited a short distance from source. Some debris appears to have been sheared up higher into the ice sheet, transported over the Nashwaak Ridge, and deposited approximately 8 km down-ice with no interconnecting dispersal train.In 1982, a geochemical orientation survey was carried out to determine which element(s) and sample medium could best and most economically be used in the search for W-Mo-Cu mineralization. Within the property area, both whole till <2000 μm (−10 mesh) samples and heavy mineral concentrates clearly defined the zones of mineralization (W, Mo, Cu) and associated geochemical dispersal trains (W, Mo, Cu, As, F). In later work, samples were not analyzed for As and F because this provided no additional information. The geochemical contrast between values in whole till samples derived from subcropping mineralization and those derived from barren bedrock is adequate to outline mineralization. Geochemical analysis of the whole till was used in later work because the sample preparation costs are considerably lower than those for heavy-mineral concentrates. Soils were not used because trace element patterns were diffuse, with the highest values occurring at variable distances down-ice from mineralization.In 1983, the objective was to better define glacial dispersal from the known mineralization and to explore for additional mineralization. Data from this program indicates a W dispersal train in whole till samples 300–400 m long. Tungsten values up to 1400 ppm and Mo values up to 260 ppm in whole till occur immediately down-ice from the main subcropping W-Mo mineralization. The element associations (i.e. W-Mo-Cu and W-Mo) in the till reflect the elemental composition of the source mineralization (i.e. Zones I and II and Zone III).Backhoe trenching is a useful and cost-effective technique to expose Quaternary sediments. Examination of the overburden sections provides an understanding of the glacial history which aids in tracing geochemical dispersal trains up-ice to bedrock source.     

In situ trace elements and sulfur isotope analysis of sulfides from the Akiri Cu ± (Ag) deposit,Benue Trough,North-central Nigeria: Implications for ore genesis

The Benue Trough of Nigeria is an intracratonic rift basin hosting several vein-type base metal deposits. The Akiri Cu ± (Ag) deposit represents a distinct sub-class of sediment-hosted Pb-Zn-Cu-Ba mineralization found throughout the Benue Trough. The deposit is hosted in bleached red beds of the Keana Formation and in shale-siltstones and carbonates of the Ezeaku Formation in the Middle Benue Trough, North-Central Nigeria. Mineralization at the Akiri deposit occurs as vein in-fillings in a series of NE-SW and E-W trending faults and fractures in the Early- to Late-Turonian Keana and Eze-Aku sedimentary rocks. To better constrain the sources of ore minerals and structural controls on the formation of this sediment-hosted Cu ± (Ag) mineralization, we report combined geologic, geochemical, mineralogical, and stable isotopic data for the Akiri Cu ± (Ag) deposit. Major ore-stage sulfides at Akiri are chalcopyrite and pyrite, which were accompanied by several types of alteration, including silicification, hematization, limited pyritization, and bleaching of mineralized sandstone bodies. In-situ trace element and sulfur isotopic data distinguishes early-stage pyrite (Py1) from late-stage pyrite (Py2). The late-stage Py2 co-exists with chalcopyrite suggesting coeval precipitation. Early-stage pyrite (Py1) contains lower Ag (avg. 0.04 ppm) but higher Au (avg. 3.03 ppm) than the late-stage pyrite (Py2) (avg. Ag = 2.78 ppm; Au = 0.424 ppm). The δ³⁴S values of the early-stage sulfide (Py1) vary from 19.07‰ to 25.99‰ (avg. 22.20‰), suggesting that sulfur was largely derived from thermochemical reduction (TSR) of seawater sulfate. The δ³⁴S values for co-existing Py2 and chalcopyrite range from 9.83‰ to 11.24‰ (avg. 10.32‰) and from 7.37‰ to 10.69‰ (avg. 8.96‰), respectively, suggesting a derivation of sulfur from TSR of seawater sulfate with contributions from magmatic sulfur. Based on structural features and ore textures, we propose that sulfide precipitation at Akiri was facilitated by sulfur-rich fluids circulating through pre-existing structures (fractures and faults) under fairly high (>200 °C) to moderate (<170 °C) temperature conditions. Geological, mineralogical, geochemical and isotopic data from this study support the classification of the Akiri Cu (+Ag) deposit as an epigenetic sandstone-hosted copper deposit.     

Rare earth elements and yttrium geochemistry of dolomite from post-Variscan vein-type mineralization of the Nízký Jeseník and Upper Silesian Basins, Czech Republic

Rare earth elements and yttrium geochemistry of dolomite from post-Variscan vein-type Zn–Pb–Cu mineralization was studied in the Nízký Jeseník and Upper Silesian Basins. Combined with crush–leach analyses of fluid inclusions, the study provided important information on fluid–rock interaction, physico-chemical and redox conditions during crystallization of the dolomite. The mineralization is hosted by Carboniferous siliciclastic rocks, representing Variscan flysch and molasse sedimentation. Dolomite samples contain highly variable contents of REE (between 18 and 295 ppm) and Y (between 17 and 95 ppm). REY patterns are divided into four different groups which differ in regional provenance, LREE vs. HREE enrichment/depletion and significance of Eu, Gd and Y anomalies. These patterns can be the result of 1) precipitation of dolomite from near neutral fluids with important concentrations of complexing ligands as a main factor for the REY partitioning, 2) interaction of migrating fluids with host or basement rocks, or, most probably, 3) a combination of both.Regarding the importance of complexing ligands, it is proposed that in all samples fluoride and chloride complexes prevailed over sulphate, bicarbonate and hydroxide complexes. Interaction of fluids with rocks was strongly affected by the fluid temperature. Dolomites which precipitated from fluids with homogenization temperature higher than 110 °C are mostly REY-enriched while fluids colder than 110 °C produced REY-depleted dolomite. The REY-enrichment may indicate higher effectiveness of leaching of REE-bearing minerals (probably monazite, allanite and biotite) at higher temperatures. The preferential loss of LREE can be caused by the recrystallization or remobilization of dolomite. Generally, an increase in salinity and contents of Cl and F in the fluids is mostly accompanied by a higher REY content in dolomite. Positive Eu anomalies and small negative Gd and Y anomalies are typical for most of the chondrite-normalized patterns. Positive Eu_CN anomalies in dolomites are most probably the result of an increase of Eh in the parent fluid. Distribution of Y is expected to be predominantly controlled by solution complexation.     

Fluorite deposits at Encantada–Buenavista, Mexico: products of Mississippi Valley type processes

Petroleum and aqueous fluid inclusions from the Encantada–Buenavista fluorite mineralized zone in northern Mexico were analyzed by microthermometry, UV fluorescence, Raman Spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR) and Confocal Scanning Laser Microscopy (CSLM) to evaluate the geochemical evolution of the mineralizing fluids. Two-phase (petroleum or brine+vapor) and three-phase (petroleum+brine+vapor) inclusions are described. Aqueous and petroleum-rich inclusions commonly occur in the same plane. Vapor-decrepitated and stretched fluid inclusions are present. A low-salinity methane-saturated fluid and a high salinity-fluid with highly variable methane contents are recognized. H₂S is not quantified but is always detected in close association with methane. Petroleum inclusions are of two types: a low methane petroleum fluid (20 mol%) with low T_h (60 °C) and a petroleum fluid with a methane of content near 30 mol% and a T_h of 90 °C.Pressure and temperature diagrams for the aqueous and petroleum inclusions show three main intersects that allow P–T–X reconstruction of fluid evolution at La Encantada–Buenavista. A CH₄- and H₂S-rich low-salinity brine was mixed with oil that migrated under hydrostatic conditions with a thermal gradient of 70 °C/km. The arrival and mixing of a high-salinity aqueous fluid produced overpressure to 300 bars. A return to hydrostatic conditions was accompanied by an increase in the thermal gradient.The brine related to the fluorite orebodies appears to have a genetic relationship with the brines reported from the Jurassic petroleum basins located west of the fluorite bodies and similarities with reported fluids from Mississippi Valley type deposits. It is interpreted that the fluorine-rich fluids migrated toward the platform margins during the mid-Tertiary (30 to 32 Ma) using extension zones related to Basin and Range tectonism. Mixing of two different brines was responsible for precipitation and mineralization. Heat from magmas, related to tectonic extension, caused decrepitation and changes in the shape of fluid inclusions near the contact zones.