共查询到20条相似文献，搜索用时 48 毫秒
1.
2.
3.
4.
Hugo Olvera‐Vargas Nihal Oturan Didier Buisson Eric D. van Hullebusch Mehmet A. Oturan 《洁净——土壤、空气、水》2015,43(11):1455-1463
5.
In this study, untreated and treated wood fly ash (WA) was used as a low‐cost sorbent in batch sorption tests to investigate the removal of organic pollutants from a real wastewater generated by cleaning/washing of machinery in a wood‐laminate floor industry in Sweden. The experiments focused on the effect of the WA dosage and particle size on the removal efficiency for organic compounds. With a WA dosage of 160 g L?1 and a particle size less than 1 mm, the reductions of chemical oxygen demand (COD), biologic oxygen demand, and total organic carbon were 37 ± 0.4, 24 ± 0.4, and 30 ± 0.3%, respectively. Pre‐treatment of WA with hot water improved the COD removal efficiency by absorption from 37 ± 0.4 to 42 ± 1.6% when the same dosage (160 g L?1) was applied. Sorption isotherm and sorption kinetics for COD using untreated WA can be explained by Freundlich isotherm and pseudo‐second‐order kinetic models. Intra‐particle diffusion model indicates that pore diffusion is not the rate‐limiting step for COD removal. Based on the experimental data, WA could be used as an alternative low‐cost sorption media/filter for removal of organic compounds from real industrial wastewater. 相似文献
6.
The potential to remove Ni(II) ions from aqueous solutions using sea beach sand, a carbonate‐quartz mineral, was thoroughly investigated. The effects of relevant parameters such as solution pH, adsorbent dose, metal ions concentration, and temperature on Ni(II) sorption onto beach sand were examined. The sorption data followed the Langmuir, Freundlich and Dubinin‐Radushkevich (D‐R) isotherms. The adsorption was endothermic in nature at ambient temperature and the computation of the parameters, ΔH, ΔS and ΔG indicated the interactions between sorbate and sorbent to be thermodynamically favorable. Equilibrium was achieved very quickly within 30 min of shaking. A pseudo‐first order Lagergren equation was used to test the adsorption kinetics. Other kinetic models, e. g., the Morris‐Weber and Reichenberg equations, were used to calculate the rate constant of intraparticle diffusion and the fate of the diffusion process, respectively. The influence of some of the common cations and anions were also a subject of this study. 相似文献
7.
Study of Sorptional Properties of the Cation Exchanger KB-2M with Macroreticular Structure for Recovery of Zinc Ions from Sewage and Rinsing Water Although a number of ion-exchange methods have been employed for the recovery of some transition metals from industrial effluents, knowledge about ion-exchange resins with macroreticular structure is poor. The present paper describes the mechanism of sorption on such exchangers and their application for recovery of zinc from sewage rinsing water. Ion exchanger of macroreticular structure are polymers with long-chained cross-linking agents. We have synthesized carboxylic ion-exchange resins by hydrolysis of copolymerisates of methyl acrylate with different cross-linking agents: divinylbenzene, divinyl sulfide, divinyl ester of ethylene glycol and divinyl ester of di- or triethylene glycol. The sorption process on modifications of the carboxylic resins KB-2 of various structure was studied with different methods: potentiometric titration, infrared spectroscopy, electron microscopy, X-ray structural analysis. The initial zinc concentration in rinsing water was 0.05 mol/L at pH from 3 to 6. For the sorption, 0.2…1.0 g of resin were equilibrated with 100 mL of zinc solution. After equilibrium (12 h), the resin was separated from solution. The zinc ions were determined by atomic absorption spectrometry after stripping with 100 mL of 10% sulfuric acid. The distribution ratio D was calculated (D: mmole of Zn sorbed per gram of resin divided by mmole of Zn per millilitre of solution). By means of infrared spectroscopy, the mechanism of sorption of zinc ions from rinsing water was determined. There may be a possibility of the formation of complexes in the cation-exchange resin phase. It was found out in this paper that the cation-exchanger KB-2M of macroreticular structure is the most effective for the sorption of the Zn2+-ions from sewage and rinsing water. 相似文献
8.
本文系统地分析了海河断裂、天津南断裂、天津北断裂和沧东断裂等的土壤氡测量资料,用M-M珚值的组合以及H值、An值等3种方式对天津地区4条断裂的活动性强弱进行了分析和划分,经与活断层探测中得到的4条断裂的活动性分段结果对比发现,两者具有一定的一致性。同时发现,每种方法都有其局限性,进而认为,选择合适的方法,运用土壤氡测量资料能够对断层的活动性进行初步分析和分区,从而为断层的活动性分段提供参考。通过不同断裂间上述3组指标对比发现,土壤氡测量结果不能用于判断不同断裂间的活动性强弱。从实际工作出发,为利于分析断层的活动性分区,断层气测线在布设时应在探测断层与已知断裂的交汇部位附近适当增加密度。 相似文献
9.
The present study elucidates the remediation of mine waters by means of geochemical barriers („active barriers“). Active barrier systems (ABS) are developed, which can prevent heavy metal dispersion by introducing the barrier into the mine. Therefore, low‐cost materials are investigated which can remove contaminants by chemical, and/or physical mechanisms from water. The materials investigated are industrial by‐products (e.g. fly ash, red mud, scale arrears), natural wastes (e.g. tree bark), and relatively cheap natural products (bentonite, zeolites). Red mud and fly ash show the best results for the removal of Zn, Cd, Ni, and Mn from model water. Cd seems to have the strongest binding of the investigated metals on the sorption sites. The main mechanisms of metal removal from solution in this case are sorption and precipitation. Both materials have very good sorption and acid neutralization capacities (ANC), but ANC seems to be the determining factor. 相似文献
10.
Renaud F Oberhänsli F Teyssié JL Miramand P Temara A Warnau M 《Marine pollution bulletin》2011,62(5):942-947
Linear Alkylbenzene Sulfonates (LAS) are ubiquitous surfactants. Traces can be found in coastal environments. Sorption and toxicity of C12-LAS congeners were studied in controlled conditions (2-3500 μg C12LAS/L) in five marine phytoplanktonic species, using standardized methods. IC50 values ranged from 0.5 to 2 mg LAS/L. Sorption of 14C12-6 LAS isomer was measured at environmentally relevant trace levels (4 μg/L) using liquid scintillation counting. Steady-state sorption on algae was reached within 5 h in the order dinoflagellate > diatoms > green algae. The sorption data, fitted a L-type Freundlich isotherm, indicating saturation. Desorption was rapid but a low LAS fraction was still sorbed after 24 h. Toxic cell concentration was 0.38 ± 0.09 mg/g for the studied species. LAS toxicity results from sorption on biological membranes leading to non-specific disturbance of algal growth. Results indicate that LAS concentrations in coastal environments do not represent a risk for these organisms. 相似文献
11.
12.
This study investigated the removal of two model pharmaceutically active compounds (PhAcs), viz., ibuprofen and triclosan, in lab‐scale engineered floodplain filtration (EFF) system. Biodegradation experiments were performed to acquire knowledge about the degradation of the targeted PhAcs, at an initial concentration of 350 µg/L. Biodegradation results showed that the two compounds were bio‐transformed to >70% after 15 days of incubation. Column tests were performed in a statistically significant manner to determine the adsorptive potential of the suggested filler layer in the EFF (C/C0), by varying the flow rate and initial concentration of the compound. It was observed based on the F and p‐values that the main effects (F = 3163, p < 0.005) were more significant than the interactive effects (F = 9561, p < 0.05) for both ibuprofen and triclosan removal. Besides, by performing the Student's “t” test, it was concluded that the flow rate plays a major role in determining the rapidness of achieving complete breakthrough than the initial concentration of both the compounds. The data obtained from column studies under biotic conditions indicated that the removal mechanism for PhAcs is mainly biotransformation based, and that an EFF system may be effectively used to remove these emerging compounds during ground water recharge for water recycling. 相似文献
13.
14.
Sonia Regina Giancoli Barreto Wagner José Barreto Elisangela Manjurma Deduch 《洁净——土壤、空气、水》2011,39(4):362-367
The values for the partition coefficient (Kd) were calculated for Ca, Mg, Cd, Cr, Cu, Fe, Mn, Pb, Ni, and Zn at 19 sites in the Capivara hydroelectric reservoir in Brazil. It was found that the relative values of Kd follow the order: Cr > Mn > Fe > Cu > Zn > Ni > Pb > Ca > Cd, differing from the values reported for Kd in aquatic systems in the northern hemisphere. A hierarchical cluster analysis and linear correlations showed that Cr is strongly associated with Fe and Cu, and that Cd is the only metal found in complexation with organic matter, explaining its higher solubility. 相似文献
15.
Richelle M. Allen-King Peter Grathwohl William P. Ball 《Advances in water resources》2002,25(8-12):985-1016
16.
The sorption of reactive (textile) dyes onto cucurbituril, a cyclic polymer with hydrophobic cavity, was studied. Dye sorption is strongly enhanced by Ca2+ or Sr2+ concentrations up to 100 mmol/L for all studied dyes. Mg2+ and alkaline ions had similar effects for only one dye (Reactive Red 120), and only at higher concentrations. Concentrations above 100 mmol/L – depending on cation and dye – dissolve cucurbituril and prevent dye removal. As shown in previous studies by our group loadings obtained under suitable conditions (calcium concentration between 2 and 100 mmol/L, total salt concentration not exceeding 100 mmol/L) are 1 to 1.7 mol/mol or 0.9 to 1.8 g/g. The chemical mechanism responsible for the ionic influences is still under investigation. Generally, cucurbituril is a potent sorbent for reactive dyes. However, the technical application is still limited by the lack of a support material that would allow use in fixed bed filters. 相似文献
17.
18.
Cobalt and its compounds have a broad field of application in Russian industries, being essential raw materials for metallurgy, medicine, and agriculture. That is why the production of cobalt is one of the key industries in Russia. Cobalt is produced from mineral raw materials as well as from secondary raw materials (for example, after processing of spent catalysts of oil refinery). It can also be obtained as a by‐product of nickel, manganese, and some other metals processing. That is the reason why the solutions of Ni and Mn industries contain up to 50 g/L of cobalt. obalt compounds are harmful for men’s heart, bloodvessel system, and thyroid gland. This fact explains the importance of the monitoring of cobalt concentrations in natural water and sewages. This task can be effectively achieved using the analytical sorption technique. The present work is focused on the preconcentration of cobalt and its determination by means of diffuse reflection spectroscopy. The preconcentration of cobalt was carried out using the macronetwork cation exchangers KB‐2M and KB‐2‐3T synthesized on the basis of methyl acrylate and long‐chain cross‐linking agents copolymers. Based on these collectors, a cobalt determination method in industrial solutions was worked out using solid‐phase spectroscopy. The colored surface compound to be determined was obtained by a preceding cobalt sorption on the resin and by subsequent treatment of the concentrate obtained with definite amount of nitroso‐R‐salt. The Co calibration curve is linear in the concentration range of 0.05...0.50 mg/L Co (sample volume is 50.0 mL) and the detection limit is 0.02 mg/L (1 μg absolute). 相似文献
19.
Mohamed E. Mahmoud Amr A. Yakout Mahmoud I. A. Elserw Maher M. Osman 《洁净——土壤、空气、水》2016,44(8):1011-1022
20.
Guannan Liu Wei Xue Li Tao Xinhui Liu Jing Hou Meaghan Wilton Ding Gao Anjian Wang Ruiping Li 《洁净——土壤、空气、水》2014,42(10):1450-1456