Numerical investigation on the hydrodynamic characteristics of a marine propeller operating in oblique inflow

The hydrodynamic characteristics of a marine propeller operating in oblique inflow are investigated by using CFD method. Two propellers with different geometries are selected as the study subjects. RANS simulation is carried out for the propellers working at a wide range of advance coefficients and incidence angles. The effects of axial inflow and lateral inflow are demonstrated with the hydrodynamic force on the propeller under different working conditions. Based on the obtained flow field details, the hydrodynamic mechanism of propeller operating in oblique inflow is analyzed further. The trailing vortex wake of propeller is highly affected by the lateral inflow, resulting in the deflected development path and the circumferentially non-uniform structure, as well as the enhanced axial velocity in slipstream. Different flow patterns are observed on the propeller blade with the variation of circumferential position. Combined with the computed hydrodynamic forces and pressure distribution on propeller, the mechanism resulting in the increase of propulsive loads and the generation of propeller side force is explored. Finally, a systematic analysis is carried out for the propulsive loads and propeller side force as a function of axial and lateral advance coefficients. The major terms that play a dominant role in the modeling of propulsive loads and propeller side force are determined through the sensitivity analysis. This study provides a deeper insight into the hydrodynamic characteristics of propeller operating in oblique inflow, which is useful to the investigation of propeller performance during ship maneuvers.     

Water entry of flexible wedges: Some issues on the FSI phenomena

Deformable bodies entering the water can face unexpected fluid–structure interaction (FSI) phenomena introduced by the mutual interaction between the fluid motion and the structural deformations. This brief communication presents some preliminary results on the FSI phenomena involved with the water entry of deformable wedges. Wedges with various deadrise angle and flexibility impact the water at different velocities. Two different kinds of FSI are found: (i) a repetition of impacts and separations in the fluid jet and (ii) a tendency to cavitation in the underwater fluid–structure interface. These experimental findings are important since large deformations are found to introduce clearly visible FSI phenomena commonly neglected or ignored, but crucial to correctly predict the hydrodynamic load.     

Hydroelastic optimisation of a composite marine propeller in a non-uniform wake

The purpose of this paper is to optimise the hydroelastic performance of a composite marine propeller to reduce vibration and dynamic stress. A hydroelasticity method based on the finite element method (FEM) coupled with computational fluid dynamics (CFD) is used to simulate the composite marine propeller in a non-uniform wake. Composite blades can be considered as a cantilever-like laminated structure experiencing an unsteady hydrodynamic load and centrifugal force. The objective of the improved design is to minimise the vibratory hub loads. The ply angle and stacking sequence are considered as the design variables. The nonlinear periodic transient responses and vibration hub loads of the composite blade are obtained by solving coupled equations using the Newton–Raphson numerical procedure. Compared to the starting design of the propeller, the optimum solution results in a 49.6–70.6% reduction of the 7/rev hub loads.     

Influence of Ice Size Parameter Variation on Hydrodynamic Performance of Podded Propulsor

During ice-breaking navigation, a massive amount of crushed ice blocks with different sizes is accumulated under the hull of an ice-going ship. This ice slides into the flow field in the forward side of the podded propulsor, affecting the surrounding flow field and aggravating the non-uniformity of the propeller wake. A pulsating load is formed on the propeller, which affects the hydrodynamic performance of the podded propulsor. To study the changes in the propeller hydrodynamic performance during the ice podded propulsor interaction, the overlapping grid technique is used to simulate the unsteady hydrodynamic performance of the podded propulsor at different propeller rotation angles and different ice block sizes. Hence, the hydrodynamic blade behavior during propeller rotation under the interaction between the ice and podded propulsor is discussed. The unsteady propeller loads and surrounding flow fields obtained for ice blocks with different sizes interacting with the podded propulsor are analyzed in detail. The variation in the hydrodynamic performance during the circular motion of a propeller and the influence of ice size variation on the propeller thrust and torque are determined. The calculation results have certain reference significance for experiment-based research, theoretical calculations and numerical simulation concerning ice podded propulsor interaction.     

An efficient and robust approach to predict ship self-propulsion coefficients

Achieving a reliable and accurate numerical prediction of the self-propulsion performance of a ship is still an open problem that poses some relevant issues. Several CFD methods, ranging from boundary element methods (BEM) to higher-fidelity viscous Reynolds averaged Navier–Stokes (RANS) based solvers, can be used to accurately analyze the separate problems, i.e. the open water propeller and the hull calm water resistance. However, when the fully-coupled self-propulsion problem is considered, i.e. the hull advancing at uniform speed propelled by its own propulsion system, several complexities rise up. Typical flow simplifications adopted to speed-up the simulations of the single analysis (hull and propeller separately) lose their validity requiring a more complex solver to tackle the fully-coupled problem. The complexity rises up further when considering a maneuver condition. This aspect increases the computational burden and, consequently, the required time which becomes prohibitive in a preliminary ship design stage.The majority of the simplified methods proposed in literature to include propeller effects, without directly solve the propeller flow, in a high-fidelity viscous solver are not able to provide all the commonly required self-propulsion coefficients. In this work, a new method to enrich the results from a body force based approach is proposed and investigated, with the aim to reduce as much as possible the computational burden without losing any useful result. This procedure is tested for validation on the KCS hull form in self-propulsion and maneuver conditions.     

Evaluation of manoeuvring coefficients of a self-propelled ship using a blade element momentum propeller model coupled to a Reynolds averaged Navier Stokes flow solver

The use of an unsteady computational fluid dynamic analysis of the manoeuvring performance of a self-propelled ship requires a large computational resource that restricts its use as part of a ship design process. A method is presented that significantly reduces computational cost by coupling a blade element momentum theory (BEMT) propeller model with the solution of the Reynolds averaged Navier Stokes (RANS) equations. The approach allows the determination of manoeuvring coefficients for a self-propelled ship travelling straight ahead, at a drift angle and for differing rudder angles. The swept volume of the propeller is divided into discrete annuli for which the axial and tangential momentum changes of the fluid passing through the propeller are balanced with the blade element performance of each propeller section. Such an approach allows the interaction effects between hull, propeller and rudder to be captured. Results are presented for the fully appended model scale self-propelled KRISO very large crude carrier 2 (KVLCC2) hull form undergoing static rudder and static drift tests at a Reynolds number of 4.6×10⁶ acting at the ship self-propulsion point. All computations were carried out on a typical workstation using a hybrid finite volume mesh size of 2.1×10⁶ elements. The computational uncertainty is typically 2–3% for side force and yaw moment.     

Experimental investigation of single blade and propeller loads by free running model test. Straight ahead sailing

The understanding and the accurate assessment of propeller loads in realistic operative scenario, both design and off-design conditions, is of paramount importance to design low emission and comfortable ships, fulfilling the requirements of structural integrity of the propulsion system, safety and continuity of operations at sea. To this purpose, a deeper characterization of the propeller functioning, in terms of averaged and fluctuating loads, can be attained by means of the quantification of the single blade loads. In this work, a novel set up that allows to monitor the loads developed by a single blade was implemented on a free running, self propelled maneuvering model with the aim to investigate in details the hydrodynamic interactions between the spatially non-homogeneous and time-variant wake of the hull and the propeller and a complete characterization of its performance. This preliminary work introduces the experimental setup and provides a preliminary overview of the results relative to straight ahead motion.     

Experimental investigation of blade and propeller loads: Steady turning motion

This paper is the continuation of the work described in [14], dedicated to the presentation of the results of propeller performance in behind-hull during straight ahead motion obtained by a novel experimental set-up for the measurements of single blade loads. In the present case, the study shows and discusses the single blade and propeller loads developed during steady turning conditions, that were simulated by means of free running, self propelled maneuvering tests for a twin screw configuration. Maneuvering conditions are critical for the ship propulsion system, because the performance of the propeller and the side effects related to its functioning (propeller–hull induced pressure and vibrations, noise) are completely different with respect to the design condition in straight ahead motion. Thrust and torque and generation of in-plane loads (force and moments), developed by the blade during the period, evolve differently for the two propellers, due to different propeller–wake interactions. The understanding and the accurate quantification of propeller loads, in these realistic operative scenarios, are pivotal to design low emission and comfortable ships, fulfilling the requirements of safety and continuity of operations at sea. The analysis is carried out revisiting the investigation in [14] for three different speeds (F_N = 0.26, 0.34 and 0.40) and a large set of rudder angles that span moderate and tight maneuvers.     

CFD analysis of the sensitivity of propeller bearing loads to stern appendages and propulsive configurations

The present investigation focuses on the effects of the stern appendages and the propulsion system on the hydro-loads generated by the propeller during off-design conditions, with particular emphasis on the in-plane components. Recent experimental investigations carried out by free running model tests [7], [8] and CFD analysis [5] for a modern twin screw model, highlighted that maneuvers at small drift angles and yaw rates might be as critical as the tighter ones due to complex propeller-wake interactions. Therefore, design criteria should take into account also these operative conditions, in order to reduce the effects of propeller-wake interaction phenomena that degrade the overall propulsive efficiency, induce shaft/hull structural vibration and increase noise emission. In the present study we analyze the effects of geometric and propulsive modifications with respect to the twin screw configuration studied in [5]. In particular, the effect of the centreline skeg, propeller direction of rotation and control strategies of the propulsion plant on the propeller bearing loads have been investigated from the analysis of the nominal wake in maneuvring conditions, computed by unsteady RANSE simulations coupled with a propeller model based on Blade Element Theory. The considered test cases were turning circle maneuvers with different rudder angles at F_N = 0.265.     

Multi-resolution MPS for incompressible fluid-elastic structure interactions in ocean engineering

The paper presents a multi-resolution MPS (Moving Particle Semi-implicit)-based FSI (Fluid-Structure Interaction) solver for efficient and accurate simulations of incompressible fluid flows interacting with elastic structures. The fluid model is founded on the projection-based MPS solution of continuity and Navier-Stokes equations. The structure model is set based on MPS-based discretization of linear and angular momenta corresponding to an isotropic elastic solid. Fluid-structure coupling is conducted in a mathematically-physically consistent manner along with implementation of a multi-resolution scheme comprising of common radius of influence, revised weight function, revised number density and potential number density concepts to enhance i) consistency of particle-based discretizations, ii) imposition of boundary conditions and iii) volume conservation at fluid-structure interface. A set of previously developed enhanced schemes are also adopted for the fluid model. The robustness and efficiency of proposed Enhanced Multi-resolution MPS-MPS FSI solver are investigated through a set of ocean engineering-related benchmark tests. To the best knowledge of authors, this study presents the first multi-resolution particle method for FSI corresponding to incompressible fluid and elastic structures.     

Performance analysis of ducted marine propellers. Part I – Decelerating duct

The paper analyses the flow around a marine propeller ducted with a so-called decelerating nozzle both through the axial momentum theory and the nonlinear semi-analytical actuator disk model. While the well-known and widely diffused axial momentum theory can be successfully employed only to qualitatively investigate the characteristics of the flow around a ducted propeller, the nonlinear and semi-analytical method can instead evaluate the thrust exerted by the duct for different values of the overall thrust and advance coefficients. There are several advantages characterising the more advanced actuator disk method. Specifically, the wake convergence and rotation may be fully taken into account, the shape of the duct and of the radial distribution of the load can be of general type, and, finally, the mutual interaction between the duct and the propeller may be readily dealt with. The methods are employed to investigate the effects of the decelerating nozzle on the efficiency and on the cavitation condition of the propeller. In particular, the influence of some duct geometrical parameters on the device performance is thoroughly analysed providing useful insights on the operating principles of this kind of propulsive systems.     

Hydrodynamic performance of a T-shaped floating breakwater

The comprehensive utilization of floating breakwaters, specially acting as a supporting structure for offshore marine renewable energy explorations, has received more and more attention recently. Based on linear water-wave theory, the hydrodynamic performance of a T-shaped floating breakwater is semi-analytically investigated through the matched eigenfunction expansion method (MEEM). Auxiliary functions, to speed up the convergence and improve the accuracy in the numerical computations, are introduced to represent the singular behavior of fluid field near the lower salient corners of the structure. The effects of the height and installation position of the vertical screen on the reflection and transmission coefficients, dynamic response and wave forces are examined. It is found that the presence of the screen shifts the resonance frequency of RAO for both surge and pitch modes to the low-frequency area, while has no effect on heave mode. The identical added masses, damping and transmission coefficients can be obtained in the cases where the screen holds the same distance away from the longitudinal central axis of the upper box-type structure. Moreover, a relatively small pitch response can be achieved in a wide wave–frequency range, when the breakwater is Γ-shaped.     

Simulation of turning circle by CFD: Analysis of different propeller models and their effect on manoeuvring prediction

Propeller modelling in CFD simulations is a key issue for the correct prediction of hull-propeller interactions, manoeuvring characteristics and the flow field in the stern region of a marine vehicle. From this point of view, actuator disk approaches have proved their reliability and computational efficiency; for these reasons, they are commonly used for the analysis of propulsive performance of a ship. Nevertheless, these models often neglect peculiar physical phenomena which characterise the operating propeller in off-design condition, namely the in-plane loads that are of paramount importance when considering non-standard or unusual propeller/rudder arrangements. In order to emphasize the importance of these components (in particular the propeller lateral force) and the need of a detailed propeller model for the correct prediction of the manoeuvring qualities of a ship, the turning circle manoeuvre of a self-propelled fully appended twin screw tanker-like ship model with a single rudder is simulated by the unsteady RANS solver χnavis developed at CNR-INSEAN; several propeller models able to include the effect of the strong oblique flow component encountered during a manoeuvre have been considered and compared. It is emphasized that, despite these models account for very complex and fundamental physical effects, which would be lost by a traditional actuator disk approach, the increase in computational resources is almost negligible. The accuracy of these models is assessed by comparison with experimental data from free running tests. The main features of the flow field, with particular attention to the vortical structures detached from the hull are presented as well.     

Numerical study of nonlinear freak wave impact underneath a fixed horizontal deck in 2-D space

Freak waves are extreme and unexpected surface waves with huge wave heights that may lead to severe damage to ships and offshore structures. However, few researches have been conducted to investigate the impact underneath fixed horizontal decks caused by freak waves. To study these phenomena, a 2-D numerical wave tank is built in which nonlinear freak waves based on the Peregrine breather solution are generated. As a validation, a regular-wave-induced underneath impact is simulated and compared to the existing experimental measurements. Then the nonlinear freak-wave-induced impact is investigate with different values of deck clearance above the mean free surface. In addition, a comparative simulation of a “large” regular wave based on the 2nd-order Stokes wave theory with the same crest height and wave length of the nonlinear freak wave is carried out to reveal the unique features of the nonlinear freak-wave-induced impact. By applying a fluid–structure interaction (FSI) algorithm in which the bottom deck and front side wall are simplified as Euler beams in 2-D and discretized by the finite element method (FEM), the hydroelastic effects are considered during the impact event. The vertical force acting underneath the bottom deck, the transversal force acting on the front side wall, the structural displacements of the elastic deck and wall are analyzed and discussed respectively, from which meaningful conclusions are drawn.     

Direct scantling assessment of propeller blades

Traditionally, propeller design has been focused on all activities necessary to obtain a propeller featuring a high efficiency, avoiding erosive cavitation for given operating conditions and having adequate structural strength. In recent years, more and more challenging requirements have been imposed, such as the reduction of radiated noise and pressures pulses, requiring more precise analyses and methods in the optimization of the propeller performance. On the other hand, the evaluation of the propeller strength still relies on simplified methods, which basically consider the blade as a cantilever beam subjected to characteristic static forces. Since the loads acting on a blade are variable in the blade revolution and in different operating conditions throughout the ship life, a procedure to account for the influence of fatigue phenomena is proposed. The fatigue assessment could reduce the safety factor in the propeller scantling rules and allow improving the quality of propeller design (e.g. obtaining higher efficiency, margin on cavitation phenomena, less noise).     

仿生胸鳍的三维尾涡结构与参数影响分析

为研究仿胸鳍推进的机理和流体动力特性及缩小机器鱼与生物原型之间的性能差距,利用浸入边界法数值模拟了做耦合旋转运动胸鳍的非定常绕流问题。详细探讨胸鳍非定常运动的三维尾涡结构演化和推进机理,并开展胸鳍推进性能与尾涡结构的参数影响分析。结果表明:迎流面在背、腹侧边缘及鳍梢部显著涡旋结构的作用下所出现的低压力区,加之鳍表面和上游来流之间好的垂直度共同造成了在动力划水阶段的高推力;在恢复划水阶段的高升力与背侧边缘涡强度的持续增加,以及因鳍表面倾斜而引起的水动力被分解到竖直方向的比重提升有关;胸鳍尾流场被一个三维双环涡结构所支配;当前的模拟为仿胸鳍推进建立了一个最优的斯特劳哈尔数St范围(在0.55附近),在此之后平均推力仍随St的增大而增加,而推进效率则表现出一个缓慢降低的趋势;当前后拍动与纵倾运动之间的相位差为90度时,胸鳍同时取得最佳的推力和效率。     

Dynamic Analysis of A 5-MW Tripod Offshore Wind Turbine by Considering Fluid–Structure Interaction

Fixed offshore wind turbines usually have large underwater supporting structures.The fluid influences the dynamic characteristics of the structure system.The dynamic model of a 5-MW tripod offshore wind turbine considering the pile–soil system and fluid structure interaction(FSI) is established,and the structural modes in air and in water are obtained by use of ANSYS.By comparing low-order natural frequencies and mode shapes,the influence of sea water on the free vibration characteristics of offshore wind turbine is analyzed.On basis of the above work,seismic responses under excitation by El-Centro waves are calculated by the time-history analysis method.The results reveal that the dynamic responses such as the lateral displacement of the foundation and the section bending moment of the tubular piles increase substantially under the influence of the added-mass and hydrodynamic pressure of sea water.The method and conclusions presented in this paper can provide a theoretical reference for structure design and analysis of offshore wind turbines fixed in deep seawater.     

Dynamic Analysis of A 5-MW Tripod Offshore Wind Turbine by Considering Fluid–Structure Interaction

Fixed offshore wind turbines usually have large underwater supporting structures. The fluid influences the dynamic characteristics of the structure system. The dynamic model of a 5-MW tripod offshore wind turbine considering the pile–soil system and fluid structure interaction (FSI) is established, and the structural modes in air and in water are obtained by use of ANSYS. By comparing low-order natural frequencies and mode shapes, the influence of sea water on the free vibration characteristics of offshore wind turbine is analyzed. On basis of the above work, seismic responses under excitation by El-Centro waves are calculated by the time-history analysis method. The results reveal that the dynamic responses such as the lateral displacement of the foundation and the section bending moment of the tubular piles increase substantially under the influence of the added-mass and hydrodynamic pressure of sea water. The method and conclusions presented in this paper can provide a theoretical reference for structure design and analysis of offshore wind turbines fixed in deep seawater.     

Parametric study for underwater blast-induced pipeline response embedded in marine sediments

Abstract

Blast response of submerged pipelines has been a research focus in recent years. In this article, a three-dimensional numerical model is established to investigate dynamic response of pipelines due to underwater explosion. The u–p approximation is integrated into finite element method (FEM) to simulate pore water effect in the seabed. Numerical continuity between hydraulic pressure in the flow field and pore pressure in the marine sediment is guaranteed to realize the blast response of submerged pipelines in ocean environment. Both fluid–structure interaction (FSI) and pipeline–seabed interaction (PSI) have been considered in the proposed model simultaneously. A comprehensive parametric study is carried out after validation of the present model with test data from underground explosion and underwater explosion, respectively. The effect of embedment depth, TNT equivalent, stand-off distance, pipeline diameter, and pipeline thickness to blast response of the submerged pipelines is investigated based on numerical results. Variation of deformation patterns and stress distribution of the pipeline with various installation and structure parameters has been illustrated and discussed to facilitate engineering practice.     

Adaptive depth controller design for a submerged body moving near free surface

A submerged body that moves near a free surface needs to keep its attitude and position to accomplish its missions, which are required to validate the performance of a designed controller before sea trial. Hydrodynamic maneuvering coefficients are generally obtained by experiments or computational fluid dynamics, but these coefficients suffer from uncertainty. Environmental loads such as wave excitation, current, and suction forces act on the submerged body when it moves near the free surface. Therefore, a controller for the submerged body should be robust to parameter uncertainty and environmental loads. In this paper, six-degree-of-freedom equations of motion for the submerged body are constructed. An adaptive control method based on the neural network and proportional–integral–derivative controller is used for the depth controller. Simulations are performed under various depth and environmental conditions, and the results show the effectiveness of the designed controller.