Floating pontoon breakwaters

The hydrodynamic properties of a pair of long floating pontoon breakwaters of rectangular section are investigated theoretically. The structures are partially restrained by linear symmetric moorings fore and aft. The fluid motion is idealized as linearized, two-dimensional potential flow. The breakwater motions are assumed to be two-dimensional, in surge, heave and pitch. The solution for the fluid motion is obtained by the boundary integral equation method using an appropriate Green's function. Numerical results are presented that illustrate the effects of the various wave and structural parameters on the efficiency of the breakwaters as barriers to wave action. It is found that the wave reflection properties of the structures depend strongly on their width, draft and spacing and the mooring line stiffnesses, while their excess buoyancy is of lesser importance.     

涌浪作用下港内波况试验研究

基于秘鲁钱凯港的防波堤三维整体模型试验结果,研究了涌浪绕射、透射联合作用对港内波况的影响.分析了不同波向、不同谱峰周期的入射波条件下港内不同功能区的波况分布规律,并对比分析了具有不同周期的入射波对港内不同区域波高的影响,兼顾分析了波向的影响.结果表明,在涌浪作用下,受透射、绕射影响,不同入射波条件下港内比波高分布规律相...     

Reduction of hydroelastic responses of a very-long floating structure by a floating oscillating-water-column breakwater system

The hydroelastic responses of a very-long floating structure (VLFS) placed behind a reverse T-shape freely floating breakwater with a built-in oscillating water column (OWC) chamber are analyzed in two dimensions. The Bernoulli–Euler beam equation is coupled with the equations of rigid and elastic motions of the breakwater and the VLFS. The interaction of waves between the floating rigid breakwater and the elastic VLFS is formulated in a consistent manner. It has been shown numerically that the structural deflections of the VLFS can be reduced significantly by a suitably designed reverse T-shape floating breakwater.     

波浪作用下涵洞式直立堤水体交换特性研究

基于计算流体力学(CFD)数值模拟和物理模型试验结合的方式,开展涵洞式直立堤在波浪作用下的水体交换研究。CFD数值模拟采用VPM (volume-average/point-value method)-THINC (tangent of hyperbola for interface capturing)/QQ (quadratic surface representation and Gaussian quadrature)模型,并在此基础上提出一种能够标记涵洞内外水体变化的双液相流体体积模型(VOF)方法,定性及定量描述涵洞内外水体的交换特性;物理模型试验主要用来验证数值模型的准确性。研究表明,在波浪的作用下,涵洞内部会形成一股往复振荡的水流,对水体交换起到重要的作用。该振荡流主要受到涵洞高度、波浪周期以及波高的影响,涵洞深度对其影响不大。在波浪长时间的作用下,涵洞式直立堤能有效地增强港池内外水体交换。     

Hydroelastic responses and drift forces of a very-long floating structure equipped with a pin-connected oscillating-water-column breakwater system

The hydroelastic responses of a very-long floating structure (VLFS) in waves connected to a floating oscillating-water-column (OWC) breakwater system by a pin are analyzed by making use of the modal expansion method in two dimensions. The Bernoulli–Euler beam equation for the VLFS is coupled with the equations of motions of the breakwater taking account of the geometric and dynamic boundary conditions at the pin. The Legendre polynomials are employed as admissible functions representing the assumed modes of the VLFS with pinned-free-boundary conditions. It has been shown numerically that the deflections, bending moments and shear forces of the VLFS in waves can be reduced significantly by a pin-connected OWC breakwater. The time-mean horizontal drift forces of the VLFS equipped with the breakwater calculated by the near-field method are also presented.     

Moored floating breakwater response to regular and irregular waves

The simple, yet versatile numerical technique particularly suitable for investigating the problem of the wave attenuation by moored floating breakwater was recently developed by the author. In order to verift the theory, nearly full scale model tests were conducted in a large wave tank ($\text{3.6}\text{m wide}\text{× 4.5}\text{m high}\text{× 106}\text{m long}$). Both random waves and monochromatic waves were used to compare the results. A breakwater with a rectangular cross-section and a hydrodynamically shaped «three-cycle cylinderå breakwater were tested. Incident wave spectra were successfully decomposed from the multi-reflected sea spectra. Frequency response functions of transmitted wave, sway, heave and roll motions of the breakwater as well as mooring forces were all experimentally determined and compared with the theory. Generally, excellent agreements between the theory, the random wave tests and the monochromatic wave tests were obtained for the hydrodynamically shaped breakwater. Except near the modal frequencies of body motion generally good agreement between theory and experiment was obtained for the rectangular breakwater. Near the modal frequencies, the body motion was damped by the flow separation at the sharp corners of the rectangular breakwater. Generation of higher harmonics in wave, body motion and mooring forces was observed and measured, but was generally small. The slow drift oscillation and its effects on the performance of the spring moored breakwaters were also small. From the comaprisons of the small scale test and the large scale tests, it was found that the scale effects were negligibly small on the performance of the spring-moored breakwaters.     

Numerical and Experimental Investigation of Hydrodynamic Interactions of Two VLFS Modules Deployed in Tandem

This paper numerically and experimentally investigates the hydrodynamic interaction between two semi-submersible type VLFS modules in the frequency domain. Model tests were conducted to investigate the relationship between interactions and wave headings. Numerical studies were performed by solving the radiation-diffraction problem and were validated against the experimental results. Motion Response Amplitude Operators (RAOs) were obtained from numerical and experimental studies. The dependency of the hydrodynamic interaction effect on wave headings is clarified. The influence of different wave periods on the motion responses of two-module VLFS and wave elevations in the gap is studied. The results indicate that the hydrodynamic interactions of the two modules are directly related to the wave headings and the periods of the incident wave. The shielding effect plays an important role in short wave, and the influence decreases with the increase of the incident wavelength. The numerical results based on the diffraction-radiation code can give a relatively good estimation to the responses in short wave while for long wave, it would over-predict the response.     

波浪作用下方箱-水平板浮式防波堤时域水动力分析

在线性化势流理论范围内求解方箱-水平板浮式防波堤的波浪绕射和辐射问题,从时域角度分析了浮式防波堤的水动力特性.采用格林函数法将速度势定解问题的控制微分方程变换成边界上的积分方程进行数值求解,浮式防波堤的运动方程采用四阶Runge-Kutta方法求解.对不同层数水平板的浮式防波堤的波浪透射系数、运动响应和锚链受力进行了计算分析,结果表明方箱相对宽度对方箱-水平板浮式防波堤的波浪透射作用有重要的影响,透射系数随着方箱相对宽度的增加而减小.对于方箱加二层水平板的浮式防波堤,在本研究的计算条件下,当方箱相对宽度从0.110增加至0.295时,透射系数从0.88减小至0.30.水平板有利于增加浮式防波堤对波浪的衰减作用,但随着水平板层数从0增加至2,这种波浪衰减作用增加的程度趋弱.方箱-水平板的浮式防波堤的运动量小于单一方箱防波堤的运动量.与此对应,方箱-水平板防波堤的锚链受力小于单一方箱防波堤的锚链受力.     

Dual pontoon floating breakwater

The hydrodynamic properties of a dual pontoon floating breakwater consisting of a pair of floating cylinders of rectangular section, connected by a rigid deck, is investigated theoretically. The structure is partially restrained by linear symmetric moorings fore and aft. The fluid motion is idealized as linearized, two-dimensional potential flow and the equation of motion of the breakwater is taken to be that of a two-dimensional rigid body undergoing surge, heave and pitch motions. The solution for the fluid motion is obtained by the boundary integral equation method using an appropriate Green's function. Numerical results are presented which illustrate the effects of the various wave and structural parameters on the efficiency of the breakwater as a barrier to wave action. It is found that the wave reflection properties of the structure depend strongly on the width, draft and spacing of the pontoons and the mooring line stiffness, while the excess buoyancy of the system is of lesser importance.     

波浪与抛石潜堤相互作用的MPS法数值模型研究

为了研究波浪与抛石潜堤相互作用过程中大自由表面变形和堤内渗流等强非线性紊流运动问题,利用改进的MPS法,建立了模拟波浪与抛石潜堤相互作用的MPS法数值计算模型。模型将抛石潜堤假定为均质多孔介质,采用Drew的二相流运动方程描述多孔介质内外的流体运动;通过在动量方程中增加非线性阻力项,并引入亚粒子尺度紊流模型,模拟波浪与可渗结构物相互作用过程中的紊流运动。选取“U”型管中多孔介质内渗流过程和孤立波与可渗潜堤相互作用两个典型的渗流问题,通过将数值计算结果与理论解和实测值的对比分析,对所提出的MPS法紊流渗流模型的模拟精度进行验证。结果表明:基于改进的MPS法构建的垂向二维紊流渗流模型可以很好地再现“U”型管中多孔介质内渗流以及波浪作用下可渗潜堤内外的复杂流场,显著缓解流-固界面处的压力震荡与粒子分布不均匀问题,实现了较高的模拟精度。     

PROBABILITY CHARACTERISTICS OF WAVE AND WAVE PRESSURES IN FRONT OF VERTICAL BREAKWATER

The distribution of wave height in front of a vertical breakwater, the range of wave pressure fluctuation at different subsurface levels, and the wave periods have shown that they are practically invariable with depth and can be determined theoretically. The distribution of crest and trough of total pressures is the same as that of wave height. As far as different subsurface levels are concerned, the spectral constitution of wave pressure field and the regularity of attenuation of spectral components are analyzed at the vertical breakwater, and a new expression describing the equilibrium range of wave pressure spectrum obtained.     

Laboratory experiments for wave motions and turbulence flows in front of a breakwater

In this paper, laboratory data for free surface displacements and velocity fields in front of a caisson breakwater covered with wave-dissipating blocks, together with wave pressures acting on the caisson, are presented and discussed. The core of the breakwater is made of a concrete caisson with a vertical front wall. The caisson is protected by a thick layer of tetrapods and is supported by a rubble mound. The breakwater is placed on the 1/25 impermeable slope. Two types of incident waves are used in the experiments: nonbreaking waves and spilling-type breaking waves. In the breaking wave case, the incident wave breaks offshore before it reaches the breakwater. The velocity data are obtained by using both the Laser Doppler Velocimeter (LDV) and the Electromagnetic Current Meter (EMCM). The raw data are analyzed using a numerical-filtering scheme so that turbulent fluctuations are separated from the phase-dependent wave motions. The vertical profiles of the time-averaged (over a wave period) turbulent velocity components at several vertical cross-sections in front of the breakwater are then analyzed. The spatial variations of the time-averaged turbulence velocity suggest that turbulence is generated inside the protective armor layer and transported into the flow region in front of the breakwater. The wave pressures on the vertical face and on the bottom of the caisson are also reported.     

Deformation of multi-directional random waves passing over an impermeable submerged breakwater installed on a sloping bed

This study investigates the wave deformation of multi-directional random waves passing over an impermeable submerged breakwater installed on the slope. Experiments were conducted in a three-dimensional wave basin equipped with a multi-directional random wave generator. Measurements of the free surface elevations around an impermeable submerged breakwater were carried out using 19 capacitance-type wave gages. In addition, a numerical model is proposed in three-dimensional random wave field. It is shown that the numerical results reproduce the general trend of the experimental results well. Investigations are made to study the effect of the spreading parameter S_max and bottom topography (bottom slope and submerged breakwater) on the wave deformation. It is pointed out that concentration of wave energy with larger values of the spreading parameter S_max is located within narrow limits in onshore side of the submerged breakwater. Furthermore, the supplementary discussion is made by means of numerical results.     

Dynamics of elastically moored floating objects

The two-dimensional problem of wave transformation by, and motions of, moored floating objects is solved numerically as a boundary value problem by direct use of Green's identity formula for a potential function. The cross-sectional shape of the floating object, the bottom configuration and the mooring arrangements may be all arbitrary. For a given incident wave, the three modes of body motion, the wave system and mooring forces are all solved at the same time. A laboratory experiment is conducted to verify the theory. Generally good agreements between the theory and experiments are obtained as long as the viscous damping due to flow separation is small. A numerical experiment indicates that a conventional sluck mooring is to worsen the wave attenuation by a floating breakwater and that a properly arranged elastic mooring can considerably improve the wave attenuation by a floating breakwater.     

A comparison of several wave spectra for the random wave diffraction by a semi-infinite breakwater

A comparison of the diffraction of multidirectional random waves using several selected wave spectrum models is presented in this paper. Six wave spectrum models, Bretschneider, Pierson–Moskowitz, ISSC, ITTC, Mitsuyasu, and JONSWAP spectrum, are considered. A discrete form for each of the given spectrum models is used to specify the incident wave conditions. Analytical solutions based on both the Fresnel integrals and polynomial approximations of the Fresnel integrals and numerical solutions of a boundary integral approach have been used to obtain the two-dimensional wave diffraction by a semi-infinite breakwater at uniform water depth. The diffraction of random waves is based on the cumulative superposition of linear diffraction solution. The results of predicted random wave diffraction for each of the given spectrum models are compared with those of the published physical model presented by Briggs et al. [1995. Wave diffraction around breakwater. Journal of Waterway, Port, Coastal and Ocean Engineering—ASCE 121(1), 23–35]. Reasonable agreement is obtained in all cases. The effect of the directional spreading function is also examined from the results of the random wave diffraction. Based on these comparisons, the present model for the analysis of various wave spectra is found to be an accurate and efficient tool for predicting the random wave field around a semi-infinite breakwater or inside a harbor of arbitrary geometry in practical applications.     

Experimental measurements of the complex motion of a suspended axisymmetric floating body in regular and near-focused waves

Numerical models which account for the multiple response modes of floating wave energy converters (WECs) in operating conditions require experimental data for validation. Measurement and observation of complex hydrodynamic mechanisms are also required to inform the development of modelling tools suitable for the simulation of response to extreme waves. Experimental measurements are reported of the motion of an axisymmetric float to regular and near-focused waves. The mechanical system, incident wave conditions and response in a 2D vertical plane are detailed to facilitate comparison to numerical simulations. The system comprises a heaving float connected to a counterweight by an inextensible cable over two pulleys to provide a simplified representation of the slowly varying surge constraint of a mooring system. Translation of the float is measured using an optical encoder. Motion in heave, surge and pitch are also determined by a position identification method based on analysis of video footage. For low frequency regular waves, the float prescribes an elliptical trajectory and the variation of response amplitude with wave amplitude is linear. At higher frequencies, drift of up to one-third of the float radius is observed and the float oscillates along an arc. More complex motions are observed due to the three large amplitude waves of a near-focused wave group. During these waves the upper surfaces of the float are partly immersed and motion occurs in heave, surge and pitch.     

Wave run-up on a fixed surface-piercing square column using multi-layer barrier

Steep or breaking waves may produce critical run-ups on a surface-piercing column, as represented by an unexpectedly high uprush, which has the potential of generating damaging localised wave-in-deck loads. Hence, to improve the air gap performance of offshore column-stabilised platforms, this paper proposes the mounting of an innovative multi-layer barrier on the column surface at a certain distance below the lower deck. Experiments were performed using a truncated square column to examine the performances of different versions of the barrier, namely, solid-plate, porous-plate, and intermittent-plate types, under four different focused waves. All the barrier types were found to obstruct and deflect uprush flow under storm conditions. However, the solid-plate type tended to experience considerable wave forces, with its impermeability also rendering the higher layers ineffective. The intermittent-plate type dissipated the uprush flow and decreased the wave impact, although it exhibited relatively strong flow disengaging, which decreased the efficiency under large wave run-ups. Conversely, the porous-plate type exhibited adequate performance, with a larger plate porosity and moderately high mounting elevation tending to improve the uprush obstruction performance and further decrease the wave slamming loads. A barrier with an appropriately designed plate porosity, number of layers, and mount elevation is expected to perform efficiently under severe sea states, providing protection for the lower deck against extreme wave run-ups.     

Numerical investigation on the dynamics of a vertical wall defenced by an offshore breakwater

The numerical and experimental investigations on the performance of an offshore-submerged breakwater in reducing the wave forces and wave run-up on vertical wall are presented. A two-dimensional finite-element model is employed to study the hydrodynamic performance of the submerged breakwater under the action of regular and random waves. The numerical prediction has been supported with experimental measurements. The wave forces and wave run-up on the vertical wall were measured for different breakwater configurations. The applicability of linear theoretical model in the prediction of wave forces on the wall by a submerged breakwater has been discussed.     

混合模块大型浮式结构系统耦合动力响应分析

针对具有天然岛礁庇护或人工庇护的温和海洋环境,提出了一种混合模块大型浮式结构系统,即水动力性能更优的半潜式模块作为内侧主模块,消波效果更优的箱式模块作为外侧浮式防波模块和波浪能发电模块.波浪能装置利用外侧箱式模块与内侧半潜式模块的相对纵摇运动进行发电.考虑模块间多体水动力耦合效应和连接器机械耦合效应,基于ANSYS-AQWA程序重点研究了典型海况下混合5模块串联浮式结构系统的动力响应特征.结果表明,外侧箱式模块和波浪能发电装置能有效减弱内侧半潜式主模块运动响应、连接器动力响应和系泊缆绳张力,并且提供一定的能源供给.所得研究成果可为模块化超大型浮式结构系统的防波—发电集成系统设计提供参考.     

Scattering of obliquely incident water waves by partially reflecting non-transmitting breakwaters

In the present paper, analytic solutions are derived for scattering of water waves obliquely incident to a partially reflecting semi-infinite breakwater or breakwater gap. In order to examine the correctness of the derived solutions, they are compared with the solutions derived by McIver (1999) and Bowen and McIver (2002) for a semi-infinite breakwater and a breakwater gap, respectively, in the case of perfect reflection. The derived analytic solutions are used to investigate the effect of reflection coefficient of the breakwater and wave incident angle upon the tranquility at harbor entrance. The tranquility is deteriorated by the reflected waves as the reflection coefficient increases and as waves are incident more obliquely.