Directional response of a reconstituted fine‐grained soil—Part I: experimental investigation

This paper discusses the results of a large experimental program designed to investigate in a systematic manner the main features of the incremental response of fine‐grained soils. The results are obtained from triaxial stress probing experiments carried out on a French silty clay (Beaucaire Marl). All the tests have been performed on reconstituted specimens, normally consolidated to an initial state which is either isotropic or anisotropic. In the interpretation of the experimental results, extensive use is made of the concept of strain response envelope. The response envelopes obtained for different stress increment magnitudes are remarkably consistent with each other and indicate an inelastic and irreversible material response, i.e. a strong dependence on the stress increment direction, also at relatively small strain levels. A companion paper (Int. J. Numer. Anal. Meth. Geomech., this issue, 2006) assesses the performance of some advanced constitutive models in reproducing the behaviour of reconstituted Beaucaire Marl as observed in this experimental program. Copyright © 2006 John Wiley & Sons, Ltd.     

On incremental non‐linearity in granular media: phenomenological and multi‐scale views (Part I)

On the basis of fundamental constitutive laws such as elasticity, perfect plasticity, and pure viscosity, many elasto‐viscoplastic constitutive relations have been developed since the 1970s through phenomenological approaches. In addition, a few more recent micro‐mechanical models based on multi‐scale approaches are now able to describe the main macroscopic features of the mechanical behaviour of granular media. The purpose of this paper is to compare a phenomenological constitutive relation and a micro‐mechanical model with respect to a basic issue regularly raised about granular assemblies: the incrementally non‐linear character of their behaviour. It is shown that both phenomenological and micro‐mechanical models exhibit an incremental non‐linearity. In addition, the multi‐scale approach reveals that the macroscopic incremental non‐linearity could stem from the change in the regime of local contacts between particles (from plastic regime to elastic regime) in terms of the incremental macroscopic loading direction. Copyright © 2005 John Wiley & Sons, Ltd.     

Validation of a three‐dimensional constitutive model for nonlinear site response and soil‐structure interaction analyses using centrifuge test data

The capability of a bounding surface plasticity model with a vanishing elastic region to capture the multiaxial dynamic hysteretic responses of soil deposits under broadband (eg, earthquake) excitations is explored by using data from centrifuge tests. The said model was proposed by Borja and Amies in 1994 (J. Geotech. Eng., 120, 6, 1051‐1070), which is theoretically capable of representing nonlinear soil behavior in a multiaxial setting. This is an important capability that is required for exploring and quantifying site topography, soil stratigraphy, and kinematic effects in ground motion and soil‐structure interaction analyses. Results obtained herein indicate that the model can accurately predict key response data recorded during centrifuge tests on embedded specimens—including soil pressures and bending strains for structural walls, structures' racking displacements, and surface settlements—under both low‐ and high‐amplitude seismic input motions, which was achieved after performing only a basic material parameter calibration procedure. Comparisons are also made with results obtained using equivalent linear models and a well‐known pressure‐dependent multisurface plasticity model, which suggested that the present model is generally more accurate. The numerical convergence behavior of the model in nonlinear equilibrium iterations is also explored for a variety of numerical implementation and model parameter options. To facilitate broader use by researchers and practicing engineers alike, the model is implemented as a “user material” in ABAQUS Standard for implicit time stepping.     

Kinematic models for non‐coaxial granular materials. Part I: theory

The purpose of this paper is to present a physically based plasticity model for non‐coaxial granular materials. The model, which we shall call the double slip and rotation rate model (DSR² model), is a pair of kinematic equations governing the velocity field. The model is based on a discrete micro‐analysis of the kinematics of particles in contact, and is formulated by introducing a quantity called the averaged micro‐pure rotation rate (APR) into the unified plasticity model which was proposed by one of the authors. Our macro–micro mechanical analysis shows that the APR is a non‐linear function of, among other quantities, the macro‐rotation rate of the major principal axis of stress taken in the opposite sense. The requirement of energy dissipation used in the double‐sliding free‐rotating model appears to be unduly restrictive as a constitutive assumption in continuum models. In the DSR² model the APR tensor and the spin tensor are directly linked with non‐coaxiality of the stress and deformation rate tensors. We also propose a simplified plasticity model based on the DSR² model for a class of dilatant materials, and analyse its material stability. Copyright © 2005 John Wiley & Sons, Ltd.     

Comparison of continuous and discontinuous constitutive models to simulate concrete behaviour under mixed‐mode failure conditions

The paper presents detailed FE simulation results of concrete elements under mixed‐mode failure conditions according to the so‐called shear‐tension test by Nooru‐Mohamed, characterized by curved cracks. A continuous and discontinuous numerical two‐dimensional approach was used. In order to describe the concrete's behaviour within continuum mechanics, two different constitutive models were used. First, an elasto‐plastic model with isotropic hardening and softening was assumed. In a compression regime, a Drucker–Prager criterion with a non‐associated flow rule was used. In turn, in a tensile regime, a Rankine criterion with an associated flow rule was adopted. Second, an isotropic damage constitutive model was applied with a single scalar damage parameter and different definitions of the equivalent strain. Both constitutive laws were enriched by a characteristic length of micro‐structure to capture properly strain localization. As an alternative approach, the extended finite element method was used. Our results were compared with the experimental ones and with results of other FE simulations reported in the literature. Copyright © 2015 John Wiley & Sons, Ltd.     

A bounding surface elasto‐viscoplastic constitutive model for non‐isothermal cyclic analysis of asphaltic materials

An elasto‐viscoplastic constitutive model for asphaltic materials is presented within the context of bounding surface plasticity theory, taking into account the effects of the stress state, void binder degree of saturation, temperature and strain rate on the material behaviour. A stress state dependent non‐linear elasticity model is introduced to represent time‐independent recoverable portion of the deformation. The consistent visco‐plasticity framework is utilised to capture the rate‐dependent, non‐recoverable strain components. The material parameters introduced in the model are identified, and their determination from conventional laboratory tests is discussed. The capability of the model to reproduce experimentally observed response of asphaltic materials is demonstrated through numerical simulations of several laboratory test data from the literature. Copyright © 2016 John Wiley & Sons, Ltd.     

A unified approach to the implicit integration of standard,non‐standard and viscous plasticity models

It is shown how modern concepts to integrate the elasto‐plastic rate equations of standard plasticity via an implicit algorithm can be generalized to plasticity without an explicitly defined yield surface and to overstress‐type models of viscoplasticity, where the stress point can be located outside the loading surface. For completeness, a tangent operator is derived that is consistent with the update algorithm. Copyright © 2002 John Wiley & Sons, Ltd.     

Non‐coaxiality and stress–dilatancy rule in granular materials: FE investigation within micro‐polar hypoplasticity

This paper deals with FE investigations of shear localization in dilatant granular bodies. The calculations were carried out with a hypoplastic constitutive law enhanced by micro‐polar terms to properly model the shear zone evolution. The behaviour of an initially medium dense sand specimen with very smooth and very rough horizontal boundaries was analyzed during a plane strain compression test. A stochastic distribution of the initial void ratio was assumed to be spatially correlated. Attention was focused on the non‐coaxiality of the directions of the principal strain increments and principal stresses in the shear zone and on the stress–dilatancy rule. Copyright © 2008 John Wiley & Sons, Ltd.     

An operator‐split ALE model for large deformation analysis of geomaterials

Analysis of large deformation of geomaterials subjected to time‐varying load poses a very difficult problem for the geotechnical profession. Conventional finite element schemes using the updated Lagrangian formulation may suffer from serious numerical difficulties when the deformation of geomaterials is significantly large such that the discretized elements are severely distorted. In this paper, an operator‐split arbitrary Lagrangian–Eulerian (ALE) finite element model is proposed for large deformation analysis of a soil mass subjected to either static or dynamic loading, where the soil is modelled as a saturated porous material with solid–fluid coupling and strong material non‐linearity. Each time step of the operator‐split ALE algorithm consists of a Lagrangian step and an Eulerian step. In the Lagrangian step, the equilibrium equation and continuity equation of the saturated soil are solved by the updated Lagrangian method. In the Eulerian step, mesh smoothing is performed for the deformed body and the state variables obtained in the updated Lagrangian step are then transferred to the new mesh system. The accuracy and efficiency of the proposed ALE method are verified by comparison of its results with the results produced by an analytical solution for one‐dimensional finite elastic consolidation of a soil column and with the results from the small strain finite element analysis and the updated Lagrangian analysis. Its performance is further illustrated by simulation of a complex problem involving the transient response of an embankment subjected to earthquake loading. Copyright © 2007 John Wiley & Sons, Ltd.     

Discrete element method simulations of the seismic response of shallow foundations including soil‐foundation‐structure interaction

A novel three‐dimensional particle‐based technique utilizing the discrete element method is proposed to analyze the seismic response of soil‐foundation‐structure systems. The proposed approach is employed to investigate the response of a single‐degree‐of‐freedom structure on a square spread footing founded on a dry granular deposit. The soil is idealized as a collection of spherical particles using discrete element method. The spread footing is modeled as a rigid block composed of clumped particles, and its motion is described by the resultant forces and moments acting upon it. The structure is modeled as a column made of particles that are either clumped to idealize a rigid structure or bonded to simulate a flexible structure of prescribed stiffness. Analysis is done in a fully coupled scheme in time domain while taking into account the effects of soil nonlinear behavior, the possible separation between foundation base and soil caused by rocking, the possible sliding of the footing, and the dynamic soil‐foundation interaction as well as the dynamic characteristics of the superstructure. High fidelity computational simulations comprising about half a million particles were conducted to examine the ability of the proposed technique to model the response of soil‐foundation‐structure systems. The computational approach is able to capture essential dynamic response patterns. The cyclic moment–rotation relationships at the base center point of the footing showed degradation of rotational stiffness by increasing the level of strain. Permanent deformations under the foundation continued to accumulate with the increase in number of loading cycles. Copyright © 2011 John Wiley & Sons, Ltd.     

Spectral analysis of nonlocal regularization in two‐dimensional finite element models

Strain‐softening in geomaterials often leads to ill‐posed boundary‐valued problems (BVP), which cannot be solved with finite element methods without introducing some kind of regularization such as nonlocal plasticity. Hereafter we propose to apply spectral analysis for testing the performance of nonlocal plasticity in regularizing ill‐posed BVP and producing mesh‐independent solutions when local plasticity usually fails. The spectral analysis consists of examining the eigenvalues and eigenvectors of the global tangential stiffness matrix of the incremental equilibrium equations. Based on spectral analysis, we propose a criterion for passing or failing the test of constitutive regularization in the context of BVP. If the eigenvalues of the tangential operator are all positive then the regularization succeeds, otherwise it fails and may not prevent artificial mesh‐dependent solutions from appearing. The approach is illustrated in the particular case of a biaxial compression with strain‐softening plasticity. In this particular case, local softening plasticity is found to produce negative eigenvalues in the tangential stiffness matrix, which indicates ill‐posed BVP. In contrast, nonlocal softening plasticity always produces positive eigenvalues, which regularizes ill‐posed BVP. The dominant eigenvectors, which generate localized deformation patterns, have a bandwidth independent of mesh size, provided that the mesh is fine enough to capture localization. These mesh‐independent eigenmodes explain why nonlocal plasticity produces numerical solutions that are mesh‐independent. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical simulations of simple shear with non‐coaxial soil models

This paper investigates the effects of a non‐coaxial model on simulated stress–strain behaviour of granular materials subject to simple shearing under various initial conditions. In most cases, a significant difference of predictions between coaxial and non‐coaxial modelling is found during the early stage in shearing. With the increase in shearing, non‐coaxial simulations approach and tend to coincide with coaxial simulations. It is also found that the roles of non‐coaxial modelling in simulating simple shear behaviour are considerably influenced by hardening rules, flow rules, initial static lateral pressure coefficients. In some cases, the non‐coaxial modelling gives a similar simulation as the coaxial modelling. In other cases, the non‐coaxial modelling decreases the hardening response or softening response of materials, compared with the coaxial modelling. Under certain conditions, the predicted peak strength of materials with non‐coaxial modelling is larger than that for coaxial modelling. Some of these observations can be attributed to the amount of principal stress rotation in various cases analysed. Others can be attributed to the difference between the directions of the non‐coaxial plastic flow and those for coaxial plastic flow. Copyright © 2005 John Wiley & Sons, Ltd.     

Interaction between different internal length scales in strain localization analysis of fully and partially saturated porous media—the 1‐D case

The paper analyses the interaction between two internal length scales during dynamic strain localization in multiphase porous materials. The first internal length is introduced in the mathematical model by the gradient‐dependent plasticity for the solid skeleton, while the second one is naturally contained in the multiphase model and is due to the seepage process of the water via Darcy's law, which induces a rate‐dependent behaviour of the solid skeleton. Numerical results of a one‐dimensional example of water saturated porous medium demonstrate the competing effect between these two length scales. The porous medium is here treated as a multiphase continuum, with the pores filled by water and air, the last one at constant atmospheric pressure. Copyright © 2005 John Wiley & Sons, Ltd.     

Strain localization in soft rock—a typical rate‐dependent solid: experimental and numerical studies

Strain localization developing inside soft rock specimens is examined through experimental observation and numerical simulation. In the experimental study, soft rock specimens are sheared at different strain rates under plane strain conditions and deformation and strain localization characteristics are analysed. Transition of localization mode from highly localized mode for higher strain rate to distributed and diffused mode of strain localization for lower strain rates was observed. In the numerical study, simulations of plane strain compression tests are carried out at different strain rates by using an overstressed‐type elasto‐viscoplastic model in finite element computations. The role of strain rates on setting gradients of strain fields across shear band is clarified. The probable mechanism for transition of localization mode is discussed. Copyright © 2005 John Wiley & Sons, Ltd.     

A non‐coaxial constitutive model for sand deformation under rotation of principal stress axes

A constitutive model for the simulation of non‐coaxiality, an aspect of anisotropic behavior of sand subjected to the rotation of the principal stress axes, is presented in this paper. Experimental studies have shown that non‐coaxiality or non‐coincidence of principal plastic strain increments with principal stress axes under loadings involving the rotation of principal stress axes may be considerable. Besides, the rotation of the principal stress axes results in dramatic effects on stiffness and dilatant behavior of sand. Therefore, the consequences of principal stress axes rotation on deformational behavior, dilatancy and soil stiffness must be taken into account in theoretical and practical problems. To this aim, the following steps are taken: (1) A general relationship for flow direction with respect to possibility of non‐coaxial flow is developed. Moreover, special circumstances linking non‐coaxiality to instantaneous interaction between loading and soil fabric are proposed. (2) Proposing novel expressions for plastic modulus and dilatancy function, the model is enforced to provide realistic simulations when sand is subjected to the rotation of the principal stress axes. Finally, with numerous examples and comparisons, the model capabilities are shown under various stress paths and drainage conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

Facies model of a fine‐grained,tide‐dominated delta: Lower Dir Abu Lifa Member (Eocene), Western Desert,Egypt

Existing facies models of tide‐dominated deltas largely omit fine‐grained, mud‐rich successions. Sedimentary facies and sequence stratigraphic analysis of the exceptionally well‐preserved Late Eocene Dir Abu Lifa Member (Western Desert, Egypt) aims to bridge this gap. The succession was deposited in a structurally controlled, shallow, macrotidal embayment and deposition was supplemented by fluvial processes but lacked wave influence. The succession contains two stacked, progradational parasequence sets bounded by regionally extensive flooding surfaces. Within this succession two main genetic elements are identified: non‐channelized tidal bars and tidal channels. Non‐channelized tidal bars comprise coarsening‐upward sandbodies, including large, downcurrent‐dipping accretion surfaces, sometimes capped by palaeosols indicating emergence. Tidal channels are preserved as single‐storey and multilateral bodies filled by: (i) laterally migrating, elongate tidal bars (inclined heterolithic strata, 5 to 25 m thick); (ii) forward‐facing lobate bars (sigmoidal heterolithic strata, up to 10 m thick); (iii) side bars displaying oblique to vertical accretion (4 to 7 m thick); or (iv) vertically‐accreting mud (1 to 4 m thick). Palaeocurrent data show that channels were swept by bidirectional tidal currents and typically were mutually evasive. Along‐strike variability defines a similar large‐scale architecture in both parasequence sets: a deeply scoured channel belt characterized by widespread inclined heterolithic strata is eroded from the parasequence‐set top, and flanked by stacked, non‐channelized tidal bars and smaller channelized bodies. The tide‐dominated delta is characterized by: (i) the regressive stratigraphic context; (ii) net‐progradational stratigraphic architecture within the succession; (iii) the absence of upward deepening trends and tidal ravinement surfaces; and (iv) architectural relations that demonstrate contemporaneous tidal distributary channel infill and tidal bar accretion at the delta front. The detailed facies analysis of this fine‐grained, tide‐dominated deltaic succession expands the range of depositional models available for the evaluation of ancient tidal successions, which are currently biased towards transgressive, valley‐confined estuarine and coarser grained deltaic depositional systems.     

A constitutive model for the dynamic and high‐pressure behaviour of a propellant‐like material: Part II: Model development and applications

This paper presents the second part of a work that aims at developing a mechanical model for the behaviour of propellant‐like materials under high confining pressure and strain rate. The model is to be employed to determine the temperature rise due to mechanical dissipation during a dynamic penetration event. Using the kinematical and thermodynamic background derived in the first part, a viscoelastic–viscoplastic–compaction model is put forward and identified. Viscoelasticity and compaction refer to the elastomeric nature of the material, while viscoplasticity, including implicit damage through dilatancy, reflects its granular nature. Some numerical exercises are performed, in view of determining the major model forces and weaknesses, and of assessing the numerical algorithm robustness. A penetration event is preliminarily simulated, and a temperature rise field predicted. Necessary model improvements are finally discussed, together with several ways of research for a longer term approach. Copyright © 2001 John Wiley & Sons, Ltd.