Heat capacity and thermodynamic properties of GdPO<Subscript>4</Subscript> in the temperature range 0–1600 K

The heat capacity of gadolinium orthophosphate (GdPO₄) measured in the temperature range 11.15–344.11 K by adiabatic calorimetry and available literature data were used to calculate its thermodynamic functions at 0–1600 K. At 298.15 K, these functions are as follows: C _p ⁰(298.15 K) = 101.85 ± 0.05 J K⁻¹ mol⁻¹, S ⁰(298.15 K) = 123.82 ± 0.18 J K⁻¹ mol⁻¹, H ⁰(298.15 K)–H ⁰(0) = 17.250 ± 0.012 kJ mol⁻¹, and Φ ⁰(298.15 K) = 65.97 ± 0.18 J K⁻¹ mol⁻¹ The calculated Gibbs free energy of formation from the elements of GdPO₄ is Δ _f G ⁰ (298.15 K) = −1844.3 ± 4.7 kJ mol⁻¹.     

Heat capacity and thermodynamic functions of pretulite ScPO<Subscript>4</Subscript>(c) at 0–1600 K

The heat capacity of synthetic pretulite ScPO₄(c) was measured by adiabatic calorimetry within a temperature range of 12.13–345.31 K, and the temperature dependence of the pretulite heat capacity at 0–1600 K was derived from experimental and literature data on H ⁰(T)-H ⁰(298.15 K) for Sc orthophosphate. This dependence was used to calculate the values of the following thermodynamic functions: entropy, enthalpy change, and reduced Gibbs energy. They have the following values at 298.15 K: C _p ⁰ (298.15 K) = 97.45 ± 0.06 J K⁻¹ mol⁻¹, S ⁰(298.15 K) = 84.82 ± 0.18 J K⁻¹ mol⁻¹, H ⁰(298.15 K)-H ⁰(0) = 14.934 ± 0.016 kJ mol⁻¹, and Φ ⁰(298.15 K) = 34.73 ± 0.19 J K⁻¹mol⁻¹. The enthalpy of formation Δ _f H ⁰(ScPO₄, 298.15 K) = − 1893.6 ± 8.4 kJ mol⁻¹.     

Heat capacity and thermodynamic functions of xenotime YPO<Subscript>4</Subscript>(c) at 0–1600 K

The heat capacity of xenotime YPO₄(c) was measured by adiabatic calorimetry at 4.78–348.07 K. Our experimental and literature data on H ⁰(T)-H ⁰(298.15 K) of Y orthophosphate were utilized to derive the C _p ⁰(T) function of xenotime at 0–1600 K, which was then used to calculate the values of thermodynamic functions: entropy, enthalpy change, and reduced Gibbs energy. These functions assume the following values at 298.15 K: C _p ⁰ (298.15 K) = 99.27 ± 0.02 J K⁻¹ mol⁻¹, S ⁰(298.15 K) = 93.86 ± 0.08 J K⁻¹ mol⁻¹, H ⁰(298.15 K) − H ⁰(0) = 15.944 ± 0.005 kJ mol⁻¹, Φ⁰(298.15 K) = 40.38 ± 0.08 J K⁻¹ mol⁻¹. The value of the free energy of formation Δ _f G ⁰(YPO₄, 298.15 K) is −1867.9 ± 1.7 kJ mol⁻¹.     

Thermodynamic functions of eskolaite Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>(c) at 0–1800 K

The heat capacity of eskolaite Cr₂O₃(c) was determined by adiabatic vacuum calorimetry at 11.99–355.83 K and by differential calorimetry at 320–480 K. Experimental data of the authors and data compiled from the literature were applied to calculate the heat capacity, entropy, and the enthalpy change of Cr₂O₃ within the temperature range of 0–1800 K. These functions have the following values at 298.15 K: C _p ⁰ (298.15) = 121.5 ± 0.2 J K⁻¹mol⁻¹, S ⁰(298.15) = 80.95 ± 0.14 J K⁻¹mol⁻¹, and H ⁰(298.15)-H ⁰(0) = 15.30±0.02 kJ mol⁻¹. Data were obtained on the transitions from the antiferromagnetic to paramagnetic states at 228–457 K; it was determined that this transition has the following parameters: Neel temperature T _N = 307 K, Δ _tr S = 6.11 ± 0.12 J K⁻¹mol⁻¹ and δ _tr H = 1.87 ± 0.04 kJ mol⁻¹.     

Low-temperature heat capacity of magnesioferrite (MgFe2O4)

The low-temperature heat capacity of magnesioferrite (MgFe₂O₄) was measured between 1.5 K and 300 K, and thermochemical functions were derived from the results. No heat capacity anomaly was observed. From our data, we suggest a standard entropy (298.15 K) for magnesioferrite of 120.8±0.6 J mol⁻¹ K⁻¹, which is about 2.4 J mol⁻¹ K⁻¹ higher than previously reported calorimetric studies; but is in rough agreement with predictions from sets of internally consistent thermodynamic data.     

Thermodynamic data of the high-pressure phase Mg5Al5Si6O21(OH)7 (Mg-sursassite)

 Calorimetric and P–V–T data for the high-pressure phase Mg₅Al₅Si₆O₂₁(OH)₇ (Mg-sursassite) have been obtained. The enthalpy of drop solution of three different samples was measured by high-temperature oxide melt calorimetry in two laboratories (UC Davis, California, and Ruhr University Bochum, Germany) using lead borate (2PbO·B₂O₃) at T=700 ^∘C as solvent. The resulting values were used to calculate the enthalpy of formation from different thermodynamic datasets; they range from −221.1 to −259.4 kJ mol⁻¹ (formation from the oxides) respectively −13892.2 to −13927.9 kJ mol⁻¹ (formation from the elements). The heat capacity of Mg₅Al₅Si₆O₂₁(OH)₇ has been measured from T=50 ^∘C to T=500 ^∘C by differential scanning calorimetry in step-scanning mode. A Berman and Brown (1985)-type four-term equation represents the heat capacity over the entire temperature range to within the experimental uncertainty: C _P (Mg-sursassite) =(1571.104 −10560.89×T ^−0.5−26217890.0 ×T ⁻²+1798861000.0×T ⁻³) J K⁻¹ mol⁻¹ (T in K). The P V T behaviour of Mg-sursassite has been determined under high pressures and high temperatures up to 8 GPa and 800 ^∘C using a MAX 80 cubic anvil high-pressure apparatus. The samples were mixed with Vaseline to ensure hydrostatic pressure-transmitting conditions, NaCl served as an internal standard for pressure calibration. By fitting a Birch-Murnaghan EOS to the data, the bulk modulus was determined as 116.0±1.3 GPa, (K ^′=4), V _T,0 =446.49 ³ exp[∫(0.33±0.05) × 10⁻⁴ + (0.65±0.85)×10⁻⁸ T dT], (K _T/T) _P  = −0.011± 0.004 GPa K⁻¹. The thermodynamic data obtained for Mg-sursassite are consistent with phase equilibrium data reported recently (Fockenberg 1998); the best agreement was obtained with Δ_f H ⁰ ₂₉₈ (Mg-sursassite) = −13901.33 kJ mol⁻¹, and S ⁰ ₂₉₈ (Mg-sursassite) = 614.61 J K⁻¹ mol⁻¹. Received: 21 September 2000 / Accepted: 26 February 2001     

Low-temperature heat capacities of MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> and spinels of the MgCr<Subscript>2</Subscript>O<Subscript>4</Subscript>–MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> solid solution

We present results from low-temperature heat capacity measurements of spinels along the solid solution between MgAl₂O₄ and MgCr₂O₄. The data also include new low-temperature heat capacity measurements for MgAl₂O₄ spinel. Heat capacities were measured between 1.5 and 300 K, and thermochemical functions were derived from the results. No heat capacity anomaly was observed for MgAl₂O₄ spinel; however, we observe a low-temperature heat capacity anomaly for Cr-bearing spinels at temperatures below 15 K. From our data we calculate standard entropies (298.15 K) for Mg(Cr,Al)₂O₄ spinels. We suggest a standard entropy for MgAl₂O₄ of 80.9 ± 0.6 J mol⁻¹ K⁻¹. For the solid solution between MgAl₂O₄ and MgCr₂O₄, we observe a linear increase of the standard entropies from 80.9 J mol⁻¹ K⁻¹ for MgAl₂O₄ to 118.3 J mol⁻¹ K⁻¹ for MgCr₂O₄.     

Heat capacity and entropy of rutile (TiO<Subscript>2</Subscript>) and nepheline (NaAlSiO<Subscript>4</Subscript>)

 From heat capacities measured adiabatically at low temperatures, the standard entropies at 298.15 K of synthetic rutile (TiO₂) and nepheline (NaAlSiO₄) have been determined to be 50.0 ± 0.1 and 122.8 ± 0.3 J mol⁻¹ K, respectively. These values agree with previous measurements and in particular confirm the higher entropy of nepheline with respect to that of the less dense NaAlSiO₄ polymorph carnegieite. Received: 23 July 2001 / Accepted: 12 October 2001     

Diffusion of tetravalent cations in zircon

Diffusion rates for the three tetravalent cations U, Th and Hf have been measured in synthetic zircon. Diffusant sources included oxide powders and ground pre-synthesized silicates. Rutherford backscattering spectrometry (RBS) was used to measure depth profiles. Over the temperature range 1400–1650 °C, the following Arrhenius relations were obtained (diffusion coefficients in m²sec⁻¹): log D _Th = (1.936 ± 0.9820) + (− 792 ± 34 kJ mol⁻¹ /2.303 RT) log D _U = (0.212 ± 2.440) + (− 726 ± 83 kJ mol⁻¹ /2.303 RT) log D _Hf = (3.206 ± 1.592) + (− 812 ± 54 kJ mol⁻¹ /2.303 RT) The data show a systematic increase in diffusivity with decreasing ionic radius (i.e., faster diffusion rates for Hf than for U or Th), a trend also observed in our earlier study of rare earth diffusion in zircon. Diffusive fractionation may be a factor in the Lu-Hf system given the much slower diffusion rates of tetravalent cations when compared with the trivalent rare earths. The very slow diffusion rates measured for these tetravalent cations suggest that they are essentially immobile under most geologic conditions, permitting the preservation of fine-scale chemical zoning and isotopic signatures of inherited cores. Received: 12 July 1996 / Accepted: 2 December 1996     

Experimental study of Pd hydrolysis in aqueous solutions at 25–70°C

The hydrolysis of the Pd²⁺ ion in HClO₄ solutions was examined at 25–70°C, and the thermodynamic constants of equilibrium K ₍₁₎⁰ and K ₍₂₎⁰were determined for the reactions Pd²⁺ + H₂O = PdOH⁺ + H⁺ and Pd²⁺ + 2H₂O = Pd(OH)₂⁰ + 2H⁺, respectively. The values of log K ₍₁₎⁰ = −1.66 ± 0.5 (25°C) and −0.65 ± 0.25 (50°C) and log K ₍₂₎⁰ = −4.34 ± 0.3 (25°C) and −3.80 ± 0.3 (50°C) were derived using the solubility technique at 0.95 confidence level. The values of log K ₍₁₎⁰ = −1.9 ± 0.6 (25°C), −1.0 ± 0.4 (50°C), and −0.5 ± 0.3 (70°C) were obtained by spectrophotometric techniques. The palladium ion is significantly hydrolyzed at elevated temperatures (50–70°C) even in strongly acidic solutions (pH 1–1.5), and its hydrolysis is enhanced with increasing temperature.     

High-temperature heat capacity and thermodynamic properties for end-member titanite (CaTiSiO5)

 The heat capacity of end-member titanite and (CaTiSiO₅) glass has been measured in the range 328–938 K using differential scanning calorimetry. The data show a weak λ-shaped anomaly at 483 ± 5 K, presumably associated with the well-known low-pressure P2₁/a ⇆ A2/a transition, in good agreement with previous studies. A value of 0.196 ± 0.007 kJ mol⁻¹ for the enthalpy of the P2₁/a ⇆ A2/a transition was determined by integration of the area under the curve for a temperature interval of 438–528 K, bracketing the anomaly. The heat capacity data for end-member titanite and (CaTiSiO₅) glass can be reproduced within <1% using the derived empirical equations (temperature in K, pressure in bars):

Excess heat capacity and entropy of mixing along the chlorapatite–fluorapatite binary join

The heat capacity at constant pressure, C _p, of chlorapatite [Ca₅(PO₄)₃Cl – ClAp], and fluorapatite [Ca₅(PO₄)₃F – FAp], as well as of 12 compositions along the chlorapatite–fluorapatite join have been measured using relaxation calorimetry [heat capacity option of the physical properties measurement system (PPMS)] and differential scanning calorimetry (DSC) in the temperature range 5–764 K. The chlor-fluorapatites were synthesized at 1,375–1,220°C from Ca₃(PO₄)₂ using the CaF₂–CaCl₂ flux method. Most of the chlor-fluorapatite compositions could be measured directly as single crystals using the PPMS such that they were attached to the sample platform of the calorimeter by a crystal face. However, the crystals were too small for the crystal face to be polished. In such cases, where the sample coupling was not optimal, an empirical procedure was developed to smoothly connect the PPMS to the DSC heat capacities around ambient T. The heat capacity of the end-members above 298 K can be represented by the polynomials: C _p^ClAp = 613.21 − 2,313.90T ^−0.5 − 1.87964 × 10⁷ T ⁻² + 2.79925 × 10⁹ T ⁻³ and C _p^FAp = 681.24 − 4,621.73 × T ^−0.5 − 6.38134 × 10⁶ T ⁻² + 7.38088 × 10⁸ T ⁻³ (units, J mol⁻¹ K⁻¹). Their standard third-law entropy, derived from the low-temperature heat capacity measurements, is S° = 400.6 ± 1.6 J mol⁻¹ K⁻¹ for chlorapatite and S° = 383.2 ± 1.5 J mol⁻¹ K⁻¹ for fluorapatite. Positive excess heat capacities of mixing, ΔC _p^ex, occur in the chlorapatite–fluorapatite solid solution around 80 K (and to a lesser degree at 200 K) and are asymmetrically distributed over the join reaching a maximum of 1.3 ± 0.3 J mol⁻¹ K⁻¹ for F-rich compositions. They are significant at these conditions exceeding the 2σ-uncertainty of the data. The excess entropy of mixing, ΔS ^ex, at 298 K reaches positive values of 3–4 J mol⁻¹ K⁻¹ in the F-rich portion of the binary, is, however, not significantly different from zero across the join within its 2σ-uncertainty.     

Enthalpy of formation of CaSi2O5, a quenched high-pressure phase with pentacoordinate silicon

 The monoclinic titanite-like high-pressure form of calcium disilicate has been synthesized and quenched to ambient conditions to form the triclinic low-pressure phase containing silicon in four-, five- and sixfold coordination. The enthalpy of formation of the quench product has been measured by high-temperature oxide melt calorimetry. The value obtained from samples from a series of several synthesis experiments is ΔH _f = (−26.32 ± 4.27) kJ mol⁻¹ for the formation from the component oxides, or ΔH _f  = (−2482.81 ± 4.59) kJ mol⁻¹ for the formation from the elements. The result is identical within experimental error to available estimates, although the previously predicted energy difference between the monoclinic and triclinic phases could not be verified. Received: 16 February 2000 / Accepted: 14 July 2000     

Pressure–volume–temperature equation of state of andradite and grossular, by high-pressure and -temperature powder diffraction

 The thermoelastic parameters of natural andradite and grossular have been investigated by high-pressure and -temperature synchrotron X-ray powder diffraction, at ESRF, on the ID30 beamline. The P–V–T data have been fitted by Birch-Murnaghan-like EOSs, using both the approximated and the general form. We have obtained for andradite K ₀=158.0(±1.5) GPa, (dK/dT )₀=−0.020(3) GPa K⁻¹ and α₀=31.6(2) 10⁻⁶ K⁻¹, and for grossular K ₀=168.2(±1.7) GPa, (dK/dT)₀=−0.016(3) GPa K⁻¹ and α₀=27.8(2) 10⁻⁶ K⁻¹. Comparisons between the present issues and thermoelastic properties of garnets earlier determined are carried out. Received: 7 July 2000 / Accepted: 20 October 2000     

Heat capacity of γ-Fe2SiO4 between 5 and 303 K and derived thermodynamic properties

A multi-anvil device was used to synthesize 24 mg of pure γ-Fe₂SiO₄ crystals at 8.5 GPa and 1,273 K. The low-temperature heat capacity (C _p) of γ-Fe₂SiO₄ was measured between 5 and 303 K using the heat capacity option of a physical properties measurement system. The measured heat capacity data show a broad λ-transition at 11.8 K. The difference in the C _p between fayalite and γ-Fe₂SiO₄ is reduced as the temperature increases in the range of 50–300 K. The gap in C _p data between 300 and 350 K of γ-Fe₂SiO₄ is an impediment to calculation of a precise C _p equation above 298 K that can be used for phase equilibrium calculations at high temperatures and high pressures. The C _p and entropy of γ-Fe₂SiO₄ at standard temperature and pressure (S°₂₉₈) are 131.1 ± 0.6 and 140.2 ± 0.4 J mol⁻¹ K⁻¹, respectively. The Gibbs free energy at standard pressure and temperature (ΔG° _f,298) is calculated to be −1,369.3 ± 2.7 J mol⁻¹ based on the new entropy data. The phase boundary for the fayalite–γ-Fe₂SiO₄ transition at 298 K based on current thermodynamic data is located at 2.4 ± 0.6 GPa with a slope of 25.4 bars/K, consistent with extrapolated results of previous experimental studies.     

Low T heat capacity measurements and new entropy data for titanite (sphene): implications for thermobarometry of high-pressure rocks

The accepted standard state entropy of titanite (sphene) has been questioned in several recent studies, which suggested a revision from the literature value 129.3 ± 0.8 J/mol K to values in the range of 110–120 J/mol K. The heat capacity of titanite was therefore re-measured with a PPMS in the range 5 to 300 K and the standard entropy of titanite was calculated as 127.2 ± 0.2 J/mol K, much closer to the original data than the suggested revisions. Volume parameters for a modified Murgnahan equation of state: V _P,T  = V ₂₉₈° × [1 + a°(T − 298) − 20a°(T − 298)] × [1 – 4P/(K ₂₉₈ × (1 – 1.5 × 10⁻⁴ [T − 298]) + 4P)]^1/4 were fit to recent unit cell determinations at elevated pressures and temperatures, yielding the constants V ₂₉₈° = 5.568 J/bar, a° = 3.1 × 10⁻⁵ K⁻¹, and K = 1,100 kbar. The standard Gibbs free energy of formation of titanite, −2456.2 kJ/mol (∆H°_f = −2598.4 kJ/mol) was calculated from the new entropy and volume data combined with data from experimental reversals on the reaction, titanite + kyanite = anorthite + rutile. This value is 4–11 kJ/mol less negative than that obtained from experimental determinations of the enthalpy of formation, and it is slightly more negative than values given in internally consistent databases. The displacement of most calculated phase equilibria involving titanite is not large except for reactions with small ∆S. Re-calculated baric estimates for several metamorphic suites yield pressure differences on the order of 2 kbar in eclogites and 10 kbar for ultra-high pressure titanite-bearing assemblages.     

Pressure-dependent stability of cadmium chloride complexes: Potentiometric measurements at 1–1000 bar and 25°C

Potentiometric measurements were performed in the Cd(NO₃)₂-KCl-H₂O system at 25°C and 1–1000 bar using an isothermal cell with a liquid junction and equipped with a solid contact Cd-selective electrode. At 1 bar, the stepwise equilibrium constant of the fourth cadmium chloride complex CdCl₄²⁻ has been determined (log K₄⁰ = −0.88 ± 0.25). The pressure-dependent stability constants for all cadmium chloride complexes have been experimentally established for the first time. As pressure increases from 1 to 1000 bar, the stability constants for the first, third, and fourth complexes change by less than 0.05 logarithmic units, whereas that for the second complex decreases by 0.33 logarithmic units. On the basis of these data, the partial molar volumes of four cadmium chloride complexes have been determined under standard state conditions: V ⁰(CdCl⁺) = 2.20 ± 3, V ⁰(CdCl_{2 (aq)}) = 42.21 ± 5, V ⁰(CdCl₃⁻) = 63.47 ± 10, and V ⁰(CdCl₄²⁻) = 81.35 ± 15 cm³mol⁻¹. The linear correlation between the nonsolvation contributions of molar volumes and the number of ligands corresponds to the change in coordination from octahedral in Cd²⁺ and CdCl⁺ to tetrahedral in CdCl_{2 (aq)}, CdCl₃⁻, and CdCl₄²⁻ complexes. Using theoretical correlations, the HKF parameters allowing calculation of the volumetric properties of cadmium chloride complexes in a wide range of temperature and pressure have been obtained. The pressure effect on cadmium concentration in sphalerite in equilibrium with the H₂O-NaCl hydrothermal fluid has been estimated. It is shown that the Cd content in sphalerite increases with pressure.     

Calorimetric study of perovskite solid solutions in the CaSiO3–CaGeO3 system

 Enthalpies of drop solution (ΔH _drop-sol) of CaGeO₃, Ca(Si_0.1Ge_0.9)O₃, Ca(Si_0.2Ge_0.8)O₃, Ca(Si_0.3Ge_0.7)O₃ perovskite solid solutions and CaSiO₃ wollastonite were measured by high-temperature calorimetry using molten 2PbO · B₂O₃ solvent at 974 K. The obtained values were extrapolated linearly to the CaSiO₃ end member to give ΔH _drop-sol of CaSiO₃ perovskite of 0.2 ± 4.4 kJ mol⁻¹. The difference in ΔH _drop-sol between CaSiO₃, wollastonite, and perovskite gives a transformation enthalpy (wo → pv) of 104.4 ± 4.4 kJ mol⁻¹. The formation enthalpy of CaSiO₃ perovskite was determined as 14.8 ± 4.4 kJ mol⁻¹ from lime + quartz or −22.2 ± 4.5 kJ mol⁻¹ from lime + stishovite. A comparison of lattice energies among A²⁺B⁴⁺O₃ perovskites suggests that amorphization during decompression may be due to the destabilizing effect on CaSiO₃ perovskite from a large nonelectrostatic energy (repulsion energy) at atmospheric pressure. By using the formation enthalpy for CaSiO₃ perovskite, phase boundaries between β-Ca₂SiO₄ + CaSi₂O₅ and CaSiO₃ perovskite were calculated thermodynamically utilizing two different reference points [where ΔG(P,T )=0] as the measured phase boundary. The calculations suggest that the phase equilibrium boundary occurs between 11.5 and 12.5 GPa around 1500 K. Its slope is still not well constrained. Received: 20 September 2000 / Accepted: 17 January 2001     

The reaction MgCr2O4 + SiO2 = Cr2O3 + MgSiO3 and the free energy of formation of magnesiochromite (MgCr2O4)

Low-temperature heat capacity measurements for MgCr₂O₄ have only been performed down to 52 K, and the commonly quoted third-law entropy at 298 K (106 J K⁻¹ mol⁻¹) was obtained by empirical extrapolation of these measurements to 0 K without considering the magnetic or electronic ordering contributions to the entropy. Subsequent magnetic measurements at low temperature reveal that the Néel temperature, at which magnetic ordering of the Cr³⁺ ions in MgCr₂O₄ occurs, is at ∼15 K. Hence a substantial contribution to the entropy of MgCr₂O₄ has been missed. We have determined the position of the near-univariant reaction MgCr₂O₄+SiO₂=MgSiO₃+Cr₂O₃. The reaction, which has a small positive slope in P-T space, has been bracketed at 100 K intervals between 1273 and 1773 K by reversal experiments. The reaction is extremely sluggish, and lengthy run times with a flux (H₂O, BaO-B₂O₃ or K₂O-B₂O₃) are needed to produce tight reversal brackets. The results, combined with assessed thermodynamic data for Cr₂O₃, MgSiO₃ and SiO₂, give the entropy and enthalpy of formation of MgCr₂O₄ spinel. As expected, our experimental results are not in good agreement with the presently available thermodynamic data. We obtain Δ _f H ^∘ ₂₉₈=−1759.2±1.5 kJ mol⁻¹ and S ^∘ ₂₉₈=122.1±1.0 J K⁻¹ mol⁻¹ for MgCr₂O₄. This entropy is some 16 J K⁻¹ mol⁻¹ more than the calorimetrically determined value, and implies a value for the magnetic entropy of MgCr₂O₄ consistent with an effective spin quantum number (S') for Cr³⁺ of 1/2 rather than the theoretical 3/2, indicating, as in other spinels, spin quenching. Received: 9 May 1997 / Accepted: 28 July 1997     

Excess heat capacity and entropy of mixing in the high-structural state (K,Ca)-feldspar binary

Low- and high-temperature heat capacities were measured for a series of synthetic high-structural state (K,Ca)-feldspars (Or–An) using both a relaxation and a differential scanning calorimeter. The data were collected at temperatures between 5 and 800 K on polycrystalline samples that had been synthesised and characterised in a previous study. Below T = 300 K, Or₉₀An₁₀, and Or₈₀An₂₀ showed excess heat capacities of mixing with maximum values of ~3 J mol⁻¹ K⁻¹. The other members of this binary (An > 20 mol%) had lower excess heat capacity values of up to ~1 J mol⁻¹ K⁻¹. Above T = 300 K, some compositions exhibited negative excess heat capacities of mixing (with maximum values of −2 J mol⁻¹ K⁻¹). The vibrational entropy at 298.15 K for Or₉₀An₁₀ and Or₈₀An₂₀ deviated strongly from the behaviour of a mechanical mixture, with excess entropy values of ~3.5 J mol⁻¹ K⁻¹. More An-rich members had only small excess vibrational entropies at T = 298.15 K. The difference in behaviour between members with An > 20 mol% and those with An ≤ 20 mol% is probably a consequence of the structural state of the (K,Ca)-feldspars, i.e., (K,Ca)-feldspars with An ≤ 20 mol% have monoclinic symmetry, whereas those with An > 20 mol% are triclinic. At T = 800 K, the vibrational entropy values were found to scatter around the values expected for a mechanical mixture and, thus, correspond to a quasi-ideal behaviour. The solvus for the (K,Ca)-feldspar binary was calculated based on the entropy data from this study in combination with enthalpy and volume of mixing data from a previous study.