The structural characteristics,age of origin,and tectonic attribute of the Erguna Fault,NE China

The Erguna Fault runs along the east bank of the Erguna River in NE China and is a large-scale ductile shear zone comprising granitic mylonites. This paper reports on the geometry, kinematic indicators, and 40Ar/39 Ar biotite ages of the granitic mylonites, to constrain the structural characteristics, forming age, and tectonic attribute of the Erguna ductile shear zone. The zone strikes NE and records a top-to-the-NW sense of shear. A mylonitic foliation and stretching lineation are well developed in the mylonites, which are classified as S-L tectonites. Logarithmic flinn parameters(1.18–2.35) indicate elongate strain which approximates to plane strain. Kinematic vorticity numbers are 0.42–0.92 and 0.48–0.94, based on the polar Mohr diagram and the oblique foliation in quartz ribbons, respectively, suggesting that the ductile shear zone formed under general shear, or a combination of simple and pure shear. According to finite strain and kinematic vorticity analyses, the Erguna Fault is a lengthening-thinning ductile shear zone that formed by extension. The deformation behavior of minerals in the mylonites indicates that the fault was the site of three stages of deformation: an initial stage of middle- to deep-level, high-temperature shear, a post-stress recovery phase of high-temperature static recrystallization, and a final phase of low-temperature uplift and cooling. The 40Ar/39 Ar plateau ages of biotite from the granitic mylonites are 106.16 ± 0.79 and 111.55 ± 0.67 Ma, which constrain the timing of low-temperature uplift and cooling but are younger than the ages of metamorphic core complexes(MCCs) in the Transbaikalia-northeast Mongolia region. Using measured geological sections, microtectonics, estimates of finite strain and kinematic vorticity, and regional correlations and geochronology, we conclude that the Erguna Fault is an Early Cretaceous, NNE-trending, large-scale, sub-horizontal, and extensional ductile shear zone. It shares a similar tectonic background with the MCCs, volcanic fault basins, and large and super-large volcanic-hydrothermal deposits in Transbaikalia-northeast Mongolia and the western Great Khingan Mountains, all of which are the result of overthickened crust that gravitationally collapsed and extended in the Early Cretaceous after plate collision along the present-day Sino-Russia-Mongolia border tract.     

Structure,evolution and regional tectonic implications of the Queshan metamorphic core complex in eastern Jiaodong Peninsula of China

The Queshan MCC is an important example of a crustal extensional structure in the eastern Jiaodong Peninsula along the southeastern margin of the NCC in the Early Cretaceous. The MCC is a typical Cordilleran-type core complex with a three-layered structure: (1) the upper plate is constituted by the Cretaceous supradetachment basin and Paleoproterozoic basement; (2) the lower plate comprises the Neoarchean high-grade metamorphic complexes and late Mesozoic granitic intrusions; and (3) the two plates are separated by a master detachment fault. A series of late NEN-oriented brittle faults superimposed on and destructed the early MCC. Petrology, geometry, kinematics, macro- and micro-structures and quartz c-axis fabrics imply that the MCC has a progressive exhumation history from middle-lower to subsurface level (via middle-upper crustal level) under the nearly WNW-ESE regional extensional regime. We present structural and geochronological evidence to constrain the exhumation of the Queshan MCC from ca. 135 to 113 Ma. Based on the comprehensive analysis of the different patterns of extensional structures in the Jiaodong and Liaodong Peninsula, we have defined the Jiao-Liao Early Cretaceou extensional province and further divided the crustal extension of it into two stages: the first stage was the intense flow of the middle-lower crust and the second stage was the extension of the middle-upper crust. Combining the tectonic setting, the lithosphere thinning in the Jiao-Liao Early Cretaceous extensional province can be considered a typical model for the response of crust-mantle detachment faulting under regional extension in East Asia.     

Zircon U–Pb geochronology of “Sashu mylonite”, eastern extension of Higo Plutono‐metamorphic Complex,Southwest Japan: Implication for regional tectonic evolution

Geochronological and geochemical studies reveal the possible origin of the restricted body of mylonite rocks occurring at the eastern edge of Kyushu Island, Japan, just in contact with the Sashu Fault, a part of the Paleo‐Median Tectonic Line (Paleo‐MTL). The LA‐ICP‐MS zircon U–Pb dating of the quartz diorite mylonite in this mylonitic body indicates a crystallization age of 114.0 ±1.7 Ma. Moreover, the two tonalite samples appear as thin layers within the Permian fine‐grained mafic mylonite; a part of the same body yields the age of 113.7 ±2.3 Ma and 116.9 ±1.3 Ma, with extremely low Th/U ratio. These quartz diorite mylonite and tonalite are consistent with the late Early Cretaceous magmatism and coeval metamorphism similar to those in the Higo Plutono‐metamorphic Complex in western Kyushu, Japan. This newly characterized complex occurs just south of the Cretaceous Sambagawa metamorphic rocks. The newly characterized mylonitic rocks are lying structurally above the Sambagawa Metamorphic Complex and are distributed along the Paleo‐MTL. The extension of the Higo Plutonometamorphic Complex, as well as the structural relationship between this complex and the Sambagawa Metamorphic Complex, is still controversial but holds a key to reconstruct the tectonic evolution of Southwest Japan during the Late Mesozoic to Early Cenozoic period. Hence, this article provides new insight into the reconstruction of the evolution history of East Asia as an active convergent margin.     

Protolith ages and deformation mechanism of metamorphic rocks in the Zhangbaling uplift segment of the Tan-Lu Fault Zone

Protolith ages and Indosinian deformation mechanism of metamorphic rocks in the Zhangbaling uplift segment of the Tan-Lu Fault Zone are important, unsolved problems. Our LA-ICP-MS zircon dating work indicates that protolith ages of the greenschist-facies Zhangbaling Group are 754–753 Ma, and those of the amphibolite-facies Feidong Complex are 800–745 Ma. These rocks belong to the earliest cover of the Yangtze Plate. Their ages and metamorphic features suggest that the rocks did not come from the Dabie Orogen. The Indosinian structures in the Zhangbaling Group and lower Sinian strata formed in a flatlying ductile detachment zone with a shear sense of top-to-the-SSW whereas those in the underlying Feidong Complex are characterized by ENE-WSW inclined folds developed under a ductile regime. It is suggested therefore that the sinistral Tan-Lu Fault Zone of the Indosinian period is buried under the Hefei Basin west of the Zhangbaling uplift segment and the uplift segment is a displaced block neighboring the fault zone. Detachment deformation between the upper rigid and lower ductile crust during displacement of the Zhangbaling uplift segment resulted in the formation of the flat-lying ductile detachment zone and its underlying drag fold zone of a ductile regime. The protolith ages and deformation mechanism in the Zhangbaling uplift segment further prove sinistral origination of the Tan-Lu Fault Zone during the continent-continent collision of the North China and Yangtze plates and support the indentation model for the two-plate collision that considers the Tan-Lu Fault Zone as an oblique convergence boundary.     

Structural characteristics and geochronology of migmatites in the North Dabie Complex unit: Timing of post-collisional deformation

Extensive migmatization and large-scale post-collisional intrusions occurred in the Dabie orogen, east-central China, during the Early Cretaceous, characterized by distinct deformation preserved in migmatites in the North Dabie Complex unit. The North Dabie Complex unit can be subdivided into three areas based on detailed field observations: the north of the Tiantangzhai pluton, the Luotian area and the Yuexi area. Banded migmatites crop out in the north of the Tiantangzhai pluton while anisotropically deformed migmatites occur in the Luotian area, and both types coexist in the Yuexi area. Microscopy reveals similar micro-structures are in migmatites from the north of the Tiantangzhai pluton, the Yuexi area and border of the Luotian area, while static recrystallization appears in migmatites from the core of the Luotian area. The Lattice-Preferred Orientation of dynamically recrystallized quartz grains in the migmatites are measured using electron backscattered diffraction, revealing prism <a> slip or <c> slip in migmatite from the north of the Tiantangzhai pluton and the Yuexi area and in one sample from the Luotian area. A Type I crossed girdle is developed in another sample from the Luotian area, indicating top-to-the-SE shearing that developed under greenschist facies conditions. Zircon U-Pb dates from four migmatites reveal that mainly Early Cretaceous ages are from the north of the Tiantangzhai pluton, only four Early Cretaceous ages are from the Luotian area, and all zircons from the Yuexi area record Indosinian metamorphic ages. Although zircon U-Pb results show multiple migmatization events, all samples record a migmatization age of about 132 Ma, suggesting an orogen-scale event at that time. The subsolidus deformation in migmatites indicates that deformation were soon after migmatization. Overall, this study shows that deformation in migmatites of the North Dabie Complex unit occurred somewhat later than the migmatization (~132 Ma) at about 131 Ma. The most likely mechanism for thinning of the thickened crust in the Dabie orogen involved removal of the upper along the detachment fault and ductile adjustment of lower crust during development of the North Dabie metamorphic core complex.     

Kinematics and dynamics of the Mesozoic orogeny and late-orogenic extensional collapse in the Sino-Mongolian border areas

Extensional tectonic models with the major features of metamorphic core complexes were established in the Cordilleran region of western North America dur- ing the late 1970s to early 1980s of last century[1—4].Since there were previous thrust events, some re- searchers attributed the extension to crust-thickening of Mesozoic orogen[5—8], i.e. the crust thickening dur- ing orogeny led to the fact that the materials at depthswere heated and partially melted, and the heated and low-density mat…     

SHRIMP zircon U-Pb dating and its geological significance of Chibaisong gabbro in Tonghua area,Jilin Province,China

The basic dykes are widely distributed in the Tonghua area, among which the Chibaisong No.1 gabbro has attracted many geologists’ attention to the copper-nickel sulfide deposit within it. However, its formation time has been controversial all the time. Most geologists considered that it could be formed at the late Archean or the Paleoproterozoic[1]1), while some other geologists contended that it might be formed in early Yanshannian of Mesozoic2). The forming time of the basic dyke swarm i…     

Features and origin time of Mesozoic strike-slip structures in the Yilan-Yitong Fault Zone

The NE-striking Yilan-Yitong Fault Zone(YYFZ) with a length of ca. 900 km is an important major fault zone in northeastern China. Its origin has been a controversial issue for a long time. Detailed field investigation and comprehensive analyses show that strike-slip faults or ductile shear belts exist as the origination structures on the both shoulders of the Cretaceous-Paleogene grabens. These strike-slip structures are dominated by brittle transcurrent faults, and appear as ductile shear belts only in the Weiyuanpu-Yehe and Shulan parts in the south and middle of the fault zone, respectively. The shear belts strike NE-SW and show steep mylonitic foliation and gentle mineral elongation lineation. Outcrop structures, microstructures and quartz c-axis fabrics demonstrate a sinistral shear sense with minor reverse component for the ductile shear belts. The microstructures suggest deformation temperatures of 400–450°C for the Weiyuanpu-Yehe shear belts and 350–400°C for the Shulan shear belt. A series of zircon U-Pb dating results for deformed and undeformed plutons or dikes in the shear belts constrain the strike-slip motion to the time between 160 and 126 Ma. It is further inferred from ages of main geological events in this region that the fault zone originated in the earliest Early Cretaceous. It is suggested therefore that the southern and middle parts of the Tan-Lu Fault Zone, which originated in Middle Triassic, propagated into northeastern China along the sinistral YYFZ under the earliest Early Cretaceous regional compression that is referred to as the Yanshan B event. The earliest Early Cretaceous initiation of the YYFZ results from both the high-speed oblique subduction of the Izanagi Plate and the final closure of the Mongol-Okhotsk Ocean, but the Izanagi Plate subduction played a major dynamic role in the fault zone origin.     

40Ar/39Ar geochronology and exhumation of mylonitized metamorphic complex in Changle-Nanao ductile shear zone

New⁴⁰Ar/³⁹Ar plateau ages from rocks of Changle-Nanao ductile shear zone are 107.9 Ma(Mus), 108.2 Ma(Bi), 107.1 Ma(Bi), 109.2 Ma(Hb) and 117.9 Ma(Bi) respectively, which are concordant with their isochron ages and record the formation age of the ductile shear zone. The similarity and apparent overlap of the cooling ages with respective closure temperatures of 5 minerals document initial rapid uplift during 107–118 Ma following the collision between the Min-Tai microcontinent and the Min-Zhe Mesozoic volcanic arc. The⁴⁰Ar/³⁹ Ar plateau ages, K-Ar date of K-feldspar and other geochronologic information suggest that the exhumation rate of the ductile shear zone is about 0.18–1.12 mm/a in the range of 107–70 Ma, which is mainly influenced by tectonic extension.     

The Pengguan tectonic dome of Longmen Mountains, Sichuan Province: Mesozoic denudation of a Neoproterozoic magmatic arc-basin system

Neoproterozoic igneous and metamorphic complexes occur as tectonic domes in the Longmen Mountains of the western margin of the Yangtze Block, and are important in reconstructing the Rodinian supercontinent and constraining the timing and mechanism of tectonic denudational processes. The Pengguan dome consists of granitic intrusions and metamorphic rocks of the Huangshuihe Group and is tectonically overlain by ductilly deformed Sinian to Paleozoic strata. The plutonic intrusions consist of granites with abundant amphibolite enclaves. New LA-ICP-MS zircon U-Pb dating yielded an emplacement age of 809±3 Ma and a protolith age of 844±6 Ma for the granite. The granitic rocks have geochemical signatures typical of A-type granites, indicating their formation under an extensional environment, by melting of newly formed tonalite-trondhjemite-granodiorite (TTG) rocks. A detachment fault, characterized by variable ductile shear deformation of S-C fabric and ESE-ward kinematics, separates the Pengguan dome from the Sinian-Paleozoic cover. 40Ar/39Ar dating of muscovite from the mylonite in the detachment fault of the dome demonstrates that ductile deformation occurred at ~160 Ma. This study indicates the existence of a Neoproterozoic magmatic arc-basin system, which was denudated by a Jurassic middle crustal ductile channel flow along the Longmenshan thrust belt.     

A high‐T metamorphic complex derived from the high‐P Suo metamorphic complex in the Omuta district,northern Kyushu,southwest Japan

New U–Pb ages of zircons from migmatitic pelitic gneisses in the Omuta district, northern Kyushu, southwest Japan are presented. Metamorphic zonation from the Suo metamorphic complex to the gneisses suggests that the protolith of the gneisses was the Suo metamorphic complex. The zircon ages reveal the following: (i) a transformation took place from the high‐P Suo metamorphic complex to a high‐T metamorphic complex that includes the migmatitic pelitic gneisses; (ii) the detrital zircon cores in the Suo pelitic rocks have two main age components (ca 1900–1800 Ma and 250 Ma), with some of the detrital zircon cores being supplied (being reworked) from a high‐grade metamorphic source; and (iii) one metamorphic zircon rim yields 105.1 ±5.3 Ma concordant age that represents the age of the high‐T metamorphism. The high‐P to high‐T transformation of metamorphic complexes implies the seaward shift of a volcanic arc or a landward shift of the metamorphic complex from a trench to the sides of a volcanic arc in an arc–trench system during the Early Cretaceous. The Omuta district is located on the same geographical trend as the Ryoke plutono‐metamorphic complex, and our estimated age of the high‐T metamorphism is similar to that of the Ryoke plutono‐metamorphism in the Yanai district of western Chugoku. Therefore, the high‐T metamorphic complex possibly represents the western extension of the Ryoke plutono‐metamorphic complex. The protolith of the metamorphic rocks of the Ryoke plutono‐metamorphic complex was the Jurassic accretionary complex of the inner zone of southwest Japan. The high‐P to high‐T transformation in the Omuta district also suggests that the geographic trend of the Jurassic accretionary complex was oblique to that of the mid‐Cretaceous high‐T metamorphic field.     

Evolution of the ductile shear zone of the Paishanlou gold deposits,western Liaoning,China

The combination of field surveys with analysis of microstructure of tectonite and Electron Backscatter Diffraction (EBSD) on quartz fabric indicated that three periods of ductile shear events developed in the Paishanlou gold deposits and the E-W and NE-striking ductile shear zones were formed during each event. The E-W-striking ductile shear zone, accompanied by compressional and dextral shear slip, was shear-cut by the NE-striking shear zones, accompanied by compressional-sinistral shear slip and sinistral-normal shear slip, successively. An E-W-striking ductile shear zone developed at a deeper tectonic level and at middle- to high-temperatures, accompanied by abundant microstructures, including microlayering between a polycrystal quartz belt and mica, and quartz deformation was depended on cylinder (10-10) 〈a〉 or 〈c〉 glide. The development of an E-W-striking shear zone can be seen as a tectonic pattern in the region of the Paishanlou gold deposits of the collision between the Mongolian tectonic belt and the North Archean Craton from Suolun to the Linxi suture zone during the Indosinian. The NE-striking ductile shear zone developed approximately 160 Ma during the early Yianshanian at middle to shallow tectonic levels and at middle- to low-temperatures, accompanied by typical microstructures, including polycrystal quartz aggregation and quartz subgrain rotation recrystallization, etc., and quartz deformation was depended on prismatic (1011) 〈a〉 glide. The last ductile shear event around the NE-striking shear zone developed at low temperatures and shallow tectonic levels, yielding to a pre-existing NE-striking shear zone, accompanied by abundant microstructures, including low-temperature quartz grain boundary migration and bulging recrystallization. The last ductile shear movement may be related to lithosphere thinning and the destruction of the North China Craton from approximately 130-120 Ma, and this shear event resulted directly in the mineralization in the Paishanlou region.     

The North Cycladic Detachment System

Low-angle normal faults accommodate a large part of continental post-orogenic extension. Besides the intrinsic rheological characteristics of the continental crust that may lead to the formation of shallow-dipping shear zones at the brittle–ductile transition, the role of pre-existing low-angle structures such as large thrusts has been proposed by several authors. We explore this question with the example of the North Cycladic Detachment System (NCDS) that is composed of a series of distinct detachments cropping out on the islands of Andros, Tinos and Mykonos, separating the Cycladic Blueschists in the footwall from the Upper Cycladic Nappe in the hanging wall. We show that these extensional structures are part of a single large-scale structure (more than 200 km along strike) that reactivates the Vardar suture zone. It extends eastward on Ikaria and westward offshore Evia and Thessalia where it probably connects to recent shallow-dipping normal faults evidenced on published seismic reflection profiles. The NCDS started its activity in the Oligocene concommitantly with the Aegean extension, and was still active in the Late Miocene. It has exhumed a series of metamorphic domes from southern Evia to Mykonos below low-angle detachment systems, made of low-angle normal faults and low-angle ductile shear zones. The ductile shear zones and the faults were created with a low dip and they kept the same attitude throughout their exhumation. We identify three main detachments that are part of a continuum of extension on the NCDS : Tinos detachment, Livada detachment and Mykonos detachment. A fourth detachment (Vari detachment) is the reactivation of an Eocene exhumation-related structure. Deformation in the footwall is characterized by intense stretching and flattening. Using the spatial evolution observed along strike from Andros to Mykonos we construct a history of formation of the NCDS starting with the reactivation of former thrusts leading to the exhumation of high-temperature metamorphic domes. The Aegean example shows that reactivation of earlier shallow-dipping discontinuities can play a fundamental role in continental post-orogenic extension.     

Study of thrust and nappe tectonics in the eastern Jiaodong Peninsula, China

Thrust and nappe tectonics have affected the eastern Jiaodong Peninsula, the easternmost terminal of the Sulu Ultra-high Pressure Metamorphic Belt. Four nappes have been mapped, named respectively the Shidao, Rongcheng, Mishan and Mouping nappes. The methods used included multi-scale struc- tural analysis and structural chronology analysis. These nappes define four deep level slip-thrust shear zones that were mainly active in the Mesozoic. The amount of ductile deformation decreases from the Shidao to Rongcheng to Mouping to Mishan shear zones, and shows an inverse relationship with temperature. 40Ar/39Ar chronological analysis and the chronological results of former workers reveal four movement steps defined by the development of thrusts and nappes in the late Triassic (210-180 Ma), extensional movement from the Jurassic to early Cretaceous (180-130 Ma), slip-thrust movement in the Early Cretaceous (130-120 Ma), and extensional movement since the Late Cretaceous (120 Ma). The order of boundary shear zone motion in the period of slip-thrust movement during the Early Cre- taceous (130-120 Ma) was along the Shidao, Rongcheng, Mouping and finally the Mishan shear zone. This resulted in clockwise rotation of the nappes relative to block west to the Tan-Lu Faults. Because of the similar evolutionary history of the Tan-Lu Faults and the thrust and nappe structure in the eastern Jiaodong Peninsula, slip dislocation along the Tan-Lu Faults might have been absorbed by thrust and nappe tectonics in the Jiaodong area in the Mesozoic era, resulting in much less dislocation on the Tan-Lu faults in North Eastern China than that in south along the Jiaodong Peninsula.     

New insights on the origin of the basement of the Xisha Uplift,South China Sea

The study of basement geochronology provides crucial insights into the tectonic evolution of oceans. However, early studies on the basement of the Xisha Uplift were constrained by limited geophysical and seismic data; Xiyong1 was the only commercial borehole drilled during the 1970 s because of the huge thickness of overlying Cenozoic strata on the continental margin. Utilizing two newly-acquired basement samples from borehole XK1, we present petrological analysis and zircon uranium(U)-lead(Pb) isotope dating data in this paper that enhance our understanding of the formation and tectonic features of the Xisha Uplift basement. Results indicate that this basement is composed of Late Jurassic amphibole plagiogneisses that have an average zircon 206 Pb/238 U age of 152.9±1.7 Ma. However, the youngest age of these rocks, 137±1 Ma, also suggests that metamorphism termination within the Xisha basement occurred by the Early Cretaceous. These metamorphic rocks have adamellites underneath them which were formed by magmatic intrusions during the late stage of the Early Cretaceous(107.8±3.6 Ma). Thus, in contrast to the Precambrian age(bulk rubidium(Rb)-strontium(Sr) analysis, 627 Ma) suggested by previous work on the nearby Xiyong1 borehole, zircons from XK1 are likely the product of Late Mesozoic igneous activity. Late Jurassic-Early Cretaceous regional metamorphism and granitic intrusions are not confined to Xisha; rocks have also been documented from areas including the Pearl River Mouth Basin and the Nansha Islands(Spratly Islands) and thus are likely closely related to large-scale and long-lasting subduction of the paleo-Pacific plate underneath the continental margins of East Asia, perhaps the result of closure of the Meso-Tethys in the South China Sea(SCS). Controversies remain as to whether, or not, the SCS region developed initially on a uniform Precambrian-aged metamorphic crystalline basement. It is clear, however, that by this time both Mesozoic compressive subduction and Cenozoic rifting and extension had significantly modified the original basement of the SCS region.     

Multiple generations of pseudotachylyte in the brittle to ductile regimes, Qinling–Dabie Shan ultrahigh-pressure metamorphic complex, central China

Abstract Pseudotachylytes are present along the Dahezhen shear zone in the Qinling–Dabie Shan collisional orogenic belt, central China. Two types of pseudotachylyte vein are documented in the shear zone: cataclasite‐related pseudotachylyte (C‐Pt) and mylonite‐related pseudotachylyte (M‐Pt). M‐Pt is associated with mylonite‐development and is overprinted by C‐Pt. All of the quartz and most of the feldspar porphyroclasts within the M‐Pt are plastically deformed, but not in the C‐Pt. Dynamically recrystallized fine‐grained quartz and feldspar bands are oriented subparallel to the mylonite and M‐Pt foliation, and partially surround the porphyroclasts. Our results suggest that the M‐Pt formed cyclically in the ductile region at estimated conditions of 400–650°C and 400–800 MPa due to propagation of seismic fracturing associated with the thrusting‐related rapid exhumation of the ultrahigh‐pressure metamorphic complex in the brittle regime down to a greater depth than the base of the seismogenic zone. The M‐Pt and mylonite formed in the Dahezhen shear zone at estimated conditions of 400–650°C and 400–800 MPa. The coexistence of C‐Pt and M‐Pt in the same shear zone suggests that repeated seismic slips occurred in both the brittle and ductile portions of the crust during the thrusting‐related rapid exhumation of the ultrahigh‐pressure metamorphic complex.     

Alpine tectonic evolution of a Jurassic subduction-accretionary complex: Deformation,kinematics and Ar/Ar age constraints on the Mesozoic low-grade schists of the Circum-Rhodope Belt in the eastern Rhodope-Thrace region,Bulgaria-Greece

Deformation of the Circum-Rhodope Belt Mesozoic (Middle Triassic to earliest Lower Cretaceous) low-grade schists underneath an arc-related ophiolitic magmatic suite and associated sedimentary successions in the eastern Rhodope-Thrace region occurred as a two-episode tectonic process: (i) Late Jurassic deformation of arc to margin units resulting from the eastern Rhodope-Evros arc–Rhodope terrane continental margin collision and accretion to that margin, and (ii) Middle Eocene deformation related to the Tertiary crustal extension and final collision resulting in the closure of the Vardar ocean south of the Rhodope terrane. The first deformational event D₁ is expressed by Late Jurassic NW-N vergent fold generations and the main and subsidiary planar-linear structures. Although overprinting, these structural elements depict uniform bulk north-directed thrust kinematics and are geometrically compatible with the increments of progressive deformation that develops in same greenschist-facies metamorphic grade. It followed the Early-Middle Jurassic magmatic evolution of the eastern Rhodope-Evros arc established on the upper plate of the southward subducting Maliac-Meliata oceanic lithosphere that established the Vardar Ocean in a supra-subduction back-arc setting. This first event resulted in the thrust-related tectonic emplacement of the Mesozoic schists in a supra-crustal level onto the Rhodope continental margin. This Late Jurassic-Early Cretaceous tectonic event related to N-vergent Balkan orogeny is well-constrained by geochronological data and traced at a regional-scale within distinct units of the Carpatho-Balkan Belt. Following subduction reversal towards the north whereby the Vardar Ocean was subducted beneath the Rhodope margin by latest Cretaceous times, the low-grade schists aquired a new position in the upper plate, and hence, the Mesozoic schists are lacking the Cretaceous S-directed tectono-metamorphic episode whose effects are widespread in the underlying high-grade basement. The subduction of the remnant Vardar Ocean located behind the colliding arc since the middle Cretaceous was responsible for its ultimate closure, Early Tertiary collision with the Pelagonian block and extension in the region caused the extensional collapse related to the second deformational event D₂. This extensional episode was experienced passively by the Mesozoic schists located in the hanging wall of the extensional detachments in Eocene times. It resulted in NE-SW oriented open folds representing corrugation antiforms of the extensional detachment surfaces, brittle faulting and burial history beneath thick Eocene sediments as indicated by 42.1–39.7 Ma ⁴⁰Ar/³⁹Ar mica plateau ages obtained in the study. The results provide structural constraints for the involvement components of Jurassic paleo-subduction zone in a Late Jurassic arc-continental margin collisional history that contributed to accretion-related crustal growth of the Rhodope terrane.     

沿雅鲁藏布江（东段）地区推覆与反向冲断构造的地质特征及其形成机制

沿雅鲁藏布江（东段）两岸至少发育着两套断裂系统。其一是断面北倾,由北向南远距离的推覆断裂系,发育着构造窗和飞来峰。该断裂系形成在洋－陆俯冲和陆－陆碰撞两个造山阶段（１００～２６Ｍａ）;其二是断面向南陡倾,由南向北逆冲,切割了早期的由北向南的推覆断裂系的反向冲断层系。该断裂系形成于碰撞造山阶段晚期（＜２６Ｍａ）的局部反向道冲作用或造山期后的重力伸展作用。上述两套断裂系的叠加造成沿江地区构造的复杂     

Subduction and retreating of the western Pacific plate resulted in lithospheric mantle replacement and coupled basin-mountain respond in the North China Craton

The North China Craton (NCC) witnessed Mesozoic vigorous tectono-thermal activities and transition in the nature of deep lithosphere. These processes took place in three periods: (1) Late Paleozoic to Early Jurassic (～170 Ma); (2) Middle Jurassic to Early Cretaceous (160–140 Ma); (3) Early Cretaceous to Cenozoic (140 Ma to present). The last two stages saw the lithospheric mantle replacement and coupled basin-mountain response within the North China Craton due to subduction and retreating of the Paleo-Pacific plate, and is the emphasis in this paper. In the first period, the subduction and closure of the Paleo- Asian Ocean triggered the back-arc extension, syn-collisional compression and then post-collisional extension accompanied by ubiquitous magmatism along the northern margin of the NCC. Similar processes happened in the southern margin of the craton as the subduction of the Paleo-Tethys ocean and collision with the South China Block. These processes had caused the chemical modification and mechanical destruction of the cratonic margins. The margins could serve as conduits for the asthenosphere upwelling and had the priority for magmatism and deformation. The second period saw the closure of the Mongol-Okhotsk ocean and the shear deformation and magmatism induced by the drifting of the Paleo-Pacific slab. The former led to two pulse of N-S trending compression (Episodes A and B of the Yanshan Movement) and thus the pre-existing continental marginal basins were disintegrated into sporadically basin and range province by the Mesozoic magmatic plutons and NE-SW trending faults. With the anticlockwise rotation of the Paleo-Pacific moving direction, the subduction-related magmatism migrated into the inner part of the craton and the Tanlu fault became normal fault from a sinistral one. The NCC thus turned into a back-arc extension setting at the end of this period. In the third period, the refractory subcontinental lithospheric mantle (SCLM) was firstly remarkably eroded and thinned by the subduction-induced asthenospheric upwelling, especially those beneath the weak zones (i.e., cratonic margins and the lithospheric Tanlu fault zone). Then a slightly lithospheric thickening occurred when the upwelled asthenosphere got cool and transformed to be lithospheric mantle accreted (～125 Ma) beneath the thinned SCLM. Besides, the magmatism continuously moved southeastward and the extensional deformations preferentially developed in weak zones, which include the Early Cenozoic normal fault transformed from the Jurassic thrust in the Trans-North Orogenic Belt, the crustal detachment and the subsidence of Bohai basin caused by the continuous normal strike slip of the Tanlu fault, the Cenozoic graben basins originated from the fault depression in the Trans-North Orogenic Belt, the Bohai Basin and the Sulu Orogenic belt. With small block size, inner lithospheric weak zones and the surrounding subductions/collisions, the Mesozoic NCC was characterized by (1) lithospheric thinning and crustal detachment triggered by the subduction-induced asthenospheric upwelling. Local crustal contraction and orogenesis appeared in the Trans-North Orogenic Belt coupled with the crustal detachment; (2) then upwelled asthenosphere got cool to be newly-accreted lithospheric mantle and crustal grabens and basin subsidence happened, as a result of the subduction zone retreating. Therefore, the subduction and retreating of the western Pacific plate is the outside dynamics which resulted in mantle replacement and coupled basin-mountain respond within the North China Craton. We consider that the Mesozoic decratonization of the North China Craton, or the Yanshan Movement, is a comprehensive consequence of complex geological processes proceeding surrounding and within craton, involving both the deep lithospheric mantle and shallow continental crust.     

Geometry and kinematics of extension in Alpine Corsica

The geometry of the most recent deformation in Alpine Corsica is discussed in terms of reactivation of thrusts as normal faults and crustal extension, following crustal thickening in late Cretaceous and Eocene time. A cross section interpreted in terms of obduction in previous works is shown here to be a result of ductile and brittle extension in late Oligocene and Early Miocene time. This new interpretation is based on field observations of the brittle and ductile structures and their relations to the metamorphic history in the Tenda-col de Teghime and Centuri regions, as well as additional observations in other parts of Alpine Corsica. The following geological features are observed: (1) The recent deformation was partly achieved during a top-to-the-east ductile shear close to the brittle-ductile transition and was later superimposed by brittle shear indicating a transition in time from ductile to brittle regime. (2) Extensional brittle structures in the Early Miocene Saint Florent limestone and sense of tilt are compatible with the eastward sense of shear observed in the ductile rocks. (3) The movement along major “thrust” contacts is associated with retrograde metamorphism which overprinted the early high-P-low-T paragenesis at less severe P-T conditions. They also bring tectonic units with contrasted metamorphic evolutions into close contacts. (4) There is a regional correlation between retromorphosis and recent deformation since the high-P-low-T paragenesis are better preserved in southern of Alpine Corsica where the recent deformation is less pervasive. (5) Highly non-coaxial deformation is localized along east-dipping shear zones close to brittle normal faults which bounds tilted Miocene basins; in between the geometry is more symmetric and the finite strain therefore more coaxial. (6) Late extensional brittle structures are observed at many sites in the metamorphic rocks. In the present paper we discussed these first-order observations and describe the geometry of crustal extension in Alpine Corsica. We analyze the progressive formation of a crustal-scale tilted block in Cap Corse and propose that the normal faults are localized by asymmetric boudinage of the crust. The asymmetry of this crustal-scale boudinage is controlled by the position of early thrust planes.