遥感技术在断裂研究中的应用——以张家口—蓬莱断裂带为例

张家口一蓬莱断裂带是一条北西西向活动断裂带。本文选取ETM+光学影像和SRTM高程影像作为主要数据源,结合研究区已有地质资料研究发现该带断裂构造的北西西向线性特征明显。从水系分布和错断地形等地貌标志判断,该断裂具有左阶组合样式和左行走滑活动特征。据遥感影像综合特征,可将该带分为张家口段、延庆-怀来段和北京一天津段,影像特征分段性显著,并与断裂带的分段性一致。研究结果表明,张家口-蓬莱断裂具有左行走滑的运动学特征,限制或错断北北东或北东向断裂,并且控制该区域的左阶雁列式第四纪盆地群和第四纪冲洪积物的分布。该断裂带各段对不同规模的水系分布和形态影响比较大,且北京-天津地区的华北平原段断裂对第四纪冲洪积扇和沿海地区的贝壳堤的形态和分布有一定的控制作用。地球物理深部数据和野外地质考察资料也证实了遥感解泽的结果,证明遥感技术在探查断裂构造空间展布和活动性鉴定中有着广泛的应用前景。     

Neogene non-marine sedimentation and tectonics in small pull-apart basins of the San Andreas fault system, Sonoma County, California

The San Andreas fault system in northern California forms an 80–90 km wide zone of right-lateral shear. Extensional tectonism within this broad shear zone is indicated by both Neogene silicic volcanic rocks that gradually young in the direction of shear propagation to the north-west and by numerous Neogene faultbounded structural basins filled with thick non-marine sequences. The Little Sulphur Creek basins, three well-exposed 1·5–2 km wide pull apart basins within this shear system, have sedimentation patterns analogous to those of much larger pull-apart basins. They were formed and subsequently deformed by east-west extension and by north-west to south-east-orientated right-slip concurrently with basin filling. Palaeocurrent and maximum-clast size data indicate both lateral sediment transport from fault-bounded basin margins and longitudinal transport down the basin axes. The basins are filled primarily with coarse alluvial-fan and streamflow deposits derived from a surrounding igneous, sedimentary, and metamorphic provenance. Two of the basins contain basin-plain-type lacustrine turbidites that grade laterally into distal alluvial fan, fan-delta, and sublacustrine delta deposits. Talus deposits along the south-west margin of the basins contain megabreccia indicative of active uplift. Structures indicative of dewatering, liquefaction, and slumping suggest penecontemporaneous tectonism.     

Late Quaternary activity and dextral strike-slip movement on the Karakax Fault Zone, northwest Tibet

Field observations and interpretations of satellite images reveal that the westernmost segment of the Altyn Tagh Fault (called Karakax Fault Zone) striking WNW located in the northwestern margin of the Tibetan Plateau has distinctive geomorphic and tectonic features indicative of right-lateral strike-slip fault in the Late Quaternary. South-flowing gullies and N–S-trending ridges are systematically deflected and offset by up to ~ 1250 m, and Late Pleistocene–Holocene alluvial fans and small gullies that incise south-sloping fans record dextral offset up to ~ 150 m along the fault zone. Fault scarps developed on alluvial fans vary in height from 1 to 24 m. Riedel composite fabrics of foliated cataclastic rocks including cataclasite and fault gouge developed in the shear zone indicate a principal right-lateral shear sense with a thrust component. Based on offset Late Quaternary alluvial fans, ¹⁴C ages and composite fabrics of cataclastic fault rocks, it is inferred that the average right-lateral strike-slip rate along the Karakax Fault Zone is ~ 9 mm/a in the Late Quaternary, with a vertical component of ~ 2 mm/a, and that a M 7.5 morphogenic earthquake occurred along this fault in 1902. We suggest that right-lateral slip in the Late Quaternary along the WNW-trending Karakax Fault Zone is caused by escape tectonics that accommodate north–south shortening of the western Tibetan Plateau due to ongoing northward penetration of the Indian plate into the Eurasian plate.     

Structural relationship between the Sea of Marmara Basin and the North Anatolian Fault Zone

The North Anatolian Fault (NAF) zone is 1500 km long, extending almost up to the Greek mainland in the west. It is a seismically active right-lateral strike-slip fault that accommodates the relative motion between the Turkish block and Black Sea plate. The Sea of Marmara lies along the western part of the NAF and shows evidence of subsidence. In this area pure strike-slip motion of the fault zone changes into extensional strike-slip movement that is responsible for the creation of the Sea of Marmara and the North Aegean basins. The northern half of the Sea of Marmara is interpreted as a large pull-apart basin. This basin is subdivided into three smaller basins separated by strike-slip fault segments of uplifted blocks NE-SW. Basinal areas are covered by horizontally layered sedimentary sequences. Uplifted blocks have undergone compressional stress. All the blocks are subsiding and are undergoing vertical motions and rotations relative to one another. The uplifted blocks exhibit positive Bouguer gravity anomalies. According to gravity interpretation, there is relative crustal thinning under the Sea of Marmara. The northern side of the Sea of Marmara is marked by a distinctive deep-rooted magnetic anomaly, which is dissected and shifted southward by strike-slip faulting. The southern shelf areas of the Sea of Marmara are dominated by short-wavelength magnetic anomalies of shallow origin.     

青海鄂拉山断裂带晚第四纪构造活动及其所反映的青藏高原东北缘的变形机制

鄂拉山断裂带是分隔青海乌兰盆地 (柴达木盆地的一部分 )与茶卡—共和盆地的一条重要边界断裂 ,长约 2 0 7km ,由 6条规模较大的主要以右阶或左阶次级断裂段羽列而成 ,阶距约 1～ 3.5km。该断裂右旋走滑的起始时代为第四纪初期 ,约在 1.8～ 3.8MaB .P .期间 ,大的地质体累积断错约 9～12km。断裂新活动形成了一系列山脊、冲沟和阶地等的右旋断错及断层崖、断层陡坎等。晚更新世晚期以来 ,鄂拉山断裂带的平均水平滑动速率为 (4 .1± 0 .9)mm/a ,垂直滑动速率为 (0 .15± 0 .1)mm/a。鄂拉山地区的构造变形受区域NE向构造应力作用下的剪切压扁与鄂拉山断裂的右旋剪切和挤压的共同影响 ,共和—茶卡盆地和乌兰盆地均属于走滑挤压型盆地。青藏高原东北缘地区在区域性北东向挤压的作用之下 ,应变被分解为沿北西西向断裂的左旋走滑和沿北北西向断裂的右旋走滑运动 ,形成一对共轭的剪切断裂。鄂拉山断裂及其他北北西走向断裂的发展演化和变形机制表明青藏高原东北缘向东的挤出和逃逸是非常有限的。     

西秦岭地区东昆仑-秦岭断裂系晚新生代左旋走滑历史及其向东扩展

要通过在TM遥感图像解译和野外观测的基础上,描述了东昆仑断裂带东段活动形迹的组成和活动断层地貌特征,阐述了甘南高原西秦岭地区新近纪拉分盆地的沉积-构造特征,提出了该区东昆仑-秦岭断裂系晚新生代左旋走滑伸展-走滑挤压-走滑伸展的3个阶段的构造变形模式。指出,中新世晚期至上新世早期,东昆仑-秦岭断裂系以左旋走滑伸展活动为主,伴随着西秦岭地区拉分盆地的形成和超基性火山岩群的发育。这期左旋走滑伸展活动向东扩展导致了渭河盆地新近纪引张应力方向由早期的NE-SW向转变为晚期的NW—SE向。上新世晚期以来(约3．4Ma以前),东昆仑-秦岭断裂系以左旋走滑挤压活动为主,导致早期拉分盆地的轻微褶皱变形,走滑挤压活动主要集中在东昆仑东段玛沁-玛曲主断裂带上。该期构造变动持续到早更新世,它的向东扩展产生了广泛的地壳形变效应,包括青藏东缘岷山隆起带的快速崛起、华北地区汾-渭地堑系的形成和发展以及郯庐断裂带右旋走滑活动等。中、晚更新世时期,断裂系以走滑伸展变形为主,主要集中在东昆仑断裂带东段3个分支上,地块向东挤出伴随着顺时针旋转。     

新疆阿尔泰山南部富蕴右旋走滑断裂带晚第四纪错断水系的遥感分析研究

富蕴断裂带位于阿尔泰山南侧,横切阿尔泰山褶皱带南缘及额尔齐斯深断裂,是一条呈北北西向展布的右旋走滑断裂带。沿断裂带发育一系列错断水系、错断冲积扇、挤压脊、走滑拉分盆地等反映右旋走滑活动的典型构造地貌标志。本研究在高分辨率遥感图像和数字高程模型分析的基础上,结合野外实地构造地貌测量,对沿富蕴断裂带发育的系统错断水系特征进行了详细分析研究。研究结果表明,沿富蕴断裂带发育不同级别的错断水系,大致可划分为6级:1931年地震形成的冲沟;90m左右断距的错断水系;150m左右断距的错断水系;500m左右断距的错断水系;1500m左右断距的错断水系;2000m以上断距的错断水系。同时,结合研究区及邻区的第四纪冰川资料讨论了不同级别水系可能形成时间:恰尔沟三级支流可能形成时间为末次冰期Ⅲ阶段末期,约20ka;恰尔沟二级支流可能形成时间为末次冰期Ⅰ阶段末期,约120ka;恰尔沟一级支流可能形成于该地区冰川广泛消融的倒数第2次冰期的Ⅱ阶段末期,约为250ka;恰尔沟、水磨沟、白杨沟、乌铁布拉克河、卡布尔特河等可能形成于倒数第3次冰期Ⅱ阶段末期,约为360ka。最后,我们估算出富蕴断裂带晚第四纪以来的平均右旋走滑速率为1.46～4.99mm/a。     

青藏高原北部第四纪早期断裂活动的 新生性变化初步研究*

关于第四纪早期构造事件的年代学研究取得了大量数据,但对构造事件的表现形式缺乏认识。文章通过对海原断裂带内拉分盆地演化趋势及年代学研究,认为海原断裂带内的最新拉分盆地形成于1.6MaB.P.之后,代表一次新断裂的形成时期,且新断裂走向与先存断裂有一定的逆时针夹角。通过对青藏高原中部可可西里-东昆仑断裂带构造地貌的遥感解译和强震破裂调查,认为可可西里-东昆仑断裂带是一条具有新生性的强震构造带,新断裂形成时期为1.10~0.65MaB.P.之间,其构造带内的新生性断裂走向与先存断裂亦有一定的逆时针方向夹角。两条断裂带具有一致的演化趋势,说明在早更新世中后期存在区域性的构造事件,该事件表现为一系列新生性断裂的产生。     

Cretaceous deformation history of the middle Tan-Lu fault zone in Shandong Province, eastern China

Based on field analysis of fault-slip data from different rock units of the Cretaceous basins along the middle part of the Tan-Lu fault zone (Shandong Province, eastern China), we document polyphase tectonic stress fields and address the changes in sense of motion of the Tan-Lu fault zone during the Cretaceous. The Cretaceous deformation history of the Tan-Lu fault zone can be divided into four main stages. The first stage, during the earliest Cretaceous, was dominated by N-S extension responsible for the formation of the Jiaolai basin. We interpret this extension to be related to dextral strike-slip pull-apart opening guided by the Tan-Lu fault zone. The second stage, during the middle Early Cretaceous, was overwhelmingly rift-dominated and characterized by widespread silicic to intermediate volcanism, normal faulting and basin subsidence. It was at this stage that the Tan-Lu-parallel Yi-Shu Rift was initiated by E-W to WNW-ESE extension. The tectonic regime then changed during the late Early Cretaceous to NW-SE-oriented transpression, causing inversion of the Early Cretaceous rift basin and sinistral slip along the Tan-Lu fault zone. During the Late Cretaceous, dextral activation of the Tan-Lu fault zone resulted in pull-apart opening of the Zhucheng basin, which was subsequently deformed by NE-SW compression. This deformation chronology of the Tan-Lu fault zone and the associated Cretaceous basins allow us to constrain the regional kinematic models as related to subduction along the eastern margin of Asia, or related to collision in the Tibet region.     

Paleoseismic records of large earthquakes on the cross-basin fault in the Ganyanchi pull-apart basin,Haiyuan fault,northeastern Tibetan Plateau

Field observations and analog models show that cross-basin faults play a key role in the evolution of pull-apart basins and dominate the distribution of earthquake rupture in basin areas. We studied the long-term history of large earthquakes on a cross-basin fault to reveal its behavior in response to propagating earthquake rupture and gain insight into the evolution of the pull-apart basin. A number of pull-apart basins have developed along the Haiyuan fault in the northeastern Tibetan Plateau, the largest being the Ganyanchi pull-apart basin. The surface rupture associated with the 1920 M 8.5 earthquake shows that a cross-basin fault developed in the basin and that the basin is now going through the late stage of its evolution. We excavated two trenches and drilled four cores across the cross-basin fault in the basin and found abundant evidence of paleoseismic events. Seven events were identified and ¹⁴C-dated. The two youngest events are associated with the historical records of 1092 AD and 1920 AD, respectively. The paleoseismic sequence shows the recurrence of earthquakes characterized by earthquake clusters alternating with a single event. Comparing these with previous paleoseismic results, all the major earthquake events seem to be associated with cascade events that ruptured multi-fault segments, suggesting that only an earthquake of this scale (likely M > 8) can produce obvious surface rupture along the cross-basin fault. We propose that the fault has a long tectonic history, with a series of cascade rupture events that could play an important part in the evolution of the pull-apart basin.     

2D finite-element elastic models of transtensional pull-apart basins

A set of two-dimensional finite-element elastic models are presented to provide insights on the evolution of transtensional pull-apart basins between two right-stepping, right-lateral fault segments. Three representative fault segment interaction geometries are modelled, showing underlapping, neutral and overlapping segments. Despite the simplifications of the 2D model, overall results are obtained that might help understanding the formation of pull-apart basins. Firstly, the orientations of the local σ₁ and σ₃ tensional stress directions markedly depend on the segment's position. Secondly, the mean normal stress is extensional in a transtensional basin between segments, while the region outside the step is characterized by more compressive mean normal stresses. Thirdly, the angle of offset between the fault segments is one of the most important parameters controlling the geometries of the transtensional pull-apart basins: connected depocenters with basin high and lozenge shape in the case of underlapping steps, spindle shape or lazy S or Z shape in the case of neutral steps, and broadly elongate rhomboidal to sigmoidal basins in the case of overlapping steps. Generally, en-échelon basin margin system, dual opposing asymmetric depocenter, intrabasin relative structural high, and wide basin width can be used as indicators that a pull-apart basin is developing in transtension zones.     

Fault kinematic and Plio-Quaternary paleostress evolution of the Bakırçay Basin,Western Turkey

ABSTRACT

At the end of the Cenozoic, western Turkey was fragmented by intense intra-continental tectonic deformation resulting in the formation of two extensional areas: a transtensional pull-apart basin systems in the northwest, and graben systems in the central and southwest areas. The question of the connection of this Late Cenozoic extensional tectonics to plate kinematics has long been an issue of discussion. This study presents the results of the fault slip data collected in Bak?rçay Basin in the west of Turkey and addresses changes in the direction of extensional stresses over the Plio-Quaternary. Field observations and quantitative analysis show that Bak?rçay Basin is not a simple graben basin that has evolved during a single phase. It started as a graben basin with extensional regime in the Pliocene and was transformed into a pull-apart basin under the influence of transtensional forces during the Quaternary. A chronology of two successive extensional episodes has been established and provides reasoning to constrain the timing and location of subduction-related back-arc tectonics along the Aegean region and collision-related extrusion tectonics in Turkey. The first NW–SE trending extension occurred during the Pliocene extensional phase, characterized by slab rollback and progressive steepening of the northward subduction of the African plate under the Anatolian Plate. Western Turkey has been affected, during the Middle Quaternary, by regional subsidence, and the direction of extension changed to N–S, probably in relation with the propagation of the North Anatolian Fault System. Since the Late Quaternary, NE–SW extension dominates northwest Turkey and results in the formation and development of elongated transtensional basin systems. Counterclockwise rotation of Anatolian block which is bounded to the north by the right-lateral strike-slip North Anatolian Fault System, accompanies to this extensional phase.     

2010年玉树地震(Ms7.1)地表破裂特征、破裂机制与破裂过程

2010年4月14日,青海省玉树地区发生Ms7.1级地震,造成大量人员伤亡和财产损失.地震发生后,我们对地震地表破裂带进行了详细的考察,并对同震位移量进行了精确的测量.根据野外考察和测量的结果,对玉树地震的地表破裂特征、同震位移量及其分布特征进行了分析,并对地震的破裂机制和破裂过程进行了探讨,取得如下认识:(1)玉树地震形成了沿鲜水河断裂带西北段(甘孜-玉树断裂)分布的东、西两条地表破裂带,西段破裂带分布在微观震中附近的隆宝湖拉分盆地中,长约19km;东段破裂带沿扎曲河南岸及巴塘河西岸山坡展布,长度约31km;上述两条破裂带之间存在约15km的地表破裂空区;(2)野外测量获得玉树地震的最大同震位移量为2.3m,位于东段地表破裂带中部郭央烟宋多附近;(3)地表破裂和野外构造地貌特征均反映了发震断层处于走滑伸展环境,断层左旋走滑过程中伴随正断作用;(4)地震波反演结果和地表破裂分布特征表明,玉树地震的破裂过程包括两次子事件,分别在地表形成了隆宝湖破裂带和扎曲河、巴塘河破裂带,隆宝湖及玉树县城西侧的山间谷地是在甘孜-玉树断裂长期活动的破裂带阶区转换拉张过程中形成的两个拉分盆地.     

Anomalously high uplift rates along the Ventura—Santa Barbara Coast, California—tectonic implications

The NW—SE trending segments of the California coastline from Point Arena to Point Conception (500 km) and from Los Angeles to San Diego (200 km) generally parallel major right-lateral strike-slip fault systems. Minor vertical crustal movements associated with the dominant horizontal displacements along these fault systems are recorded in local sedimentary basins and slightly deformed marine terraces. Typical maximum uplift rates during Late Quaternary time are about 0.3 m/ka, based on U-series ages of corals and amino-acid age estimates of fossil mollusks from the lowest emergent terraces.In contrast, the E–W-trending segments of the California coastline between Point Conception and Los Angeles (200 km) parallel predominantly northward-dipping thrust and high-angle reverse faults of the western Transverse Ranges. Along this coast, marine terraces display significantly greater vertical deformation. Amino-acid age estimates of mollusks from elevated marine terraces along the Ventura—Santa Barbara coast imply anomalously high uplift rates of between 1 and 6 m/ka over the past 40 to 100 ka. The deduced rate of terrace uplift decreases from Ventura to Los Angeles, conforming with a similar trend observed by others in contemporary geodetic data.The more rapid rates of terrace uplift in the western Transverse Ranges reflect N—S crustal shortening that is probably a local accommodation of the dominant right-lateral shear strain along coastal California.     

Successive Extensional Tectonic Regimes during the Mesozoic as Evidenced by Neptunian Dikes in the Pontide Magmatic Arc,Northeast Turkey

The eastern Pontide magmatic arc extends ～600 km in an E-W direction along the Black Sea coast and was disrupted by a series of fault systems trending NE-SW, NW-SE, E-W, and N-S. These fault systems are responsible for the formation of diachronous extensional basins, rift or pull-apart, in the northern, southern, and axial zones of the eastern Pontides during the Mesozoic. Successive extensional or transtensional tectonic regimes caused the abortive Liassic rift basins and the Albian and Campanian pull-apart basins with deep-spreading troughs in the southern and axial zones. Liassic, Albian, and Campanian neptunian dikes, which indicate extensional tectonic regimes, crop out within the Paleozoic granites near Kale, Gumushane, and the Malm–Lower Cretaceous platform carbonates in Amasya and Gumushane. These neptunian dikes correspond to extensional cracks that are filled and overlain by the fossiliferous red pelagic limestones. Multidirectional Liassic neptunian dikes are consistent with the general trend of the paleofaults (NE-SW, NW-SE, and E-W), and active dextral North Anatolian fault (NAF) and sinistral Northeast Anatolian fault (NEAF) systems. The Albian neptunian dikes in Amasya formed in the synthetic oblique left-lateral normal faults of the main fault zone that runs parallel to the active North Anatolian fault zone (NAFZ).

Kinematic interpretation of the Liassic and Albian neptunian dikes suggests N-S extensional stress or northward movement of the Pontides along the conjugate fracture zones parallel to the NAFZ and NEAFZ. This northward movement of the Pontides in Liassic and Albian times requires left-lateral and right-lateral slips along the conjugate NAFZ and Northeast Anatolian fault zones (NEAFZ), respectively, in contrast to the recent active tectonics that have been accommodated by N-S compressional stress. On the other hand, mutual relationships between the neptunian dikes and the associated main fault zone of Campanian age extending in an E-W direction in the Kale area, Gumushane suggest the existence of a main left-lateral transtensional wrench zone. This system might be accommodated by the counterclockwise convergence of the Turkish plate with the Afro-Arabian plate relative to the Eurasian plate, and the southward oblique subduction of Paleotethys beneath the eastern Pontide magmatic arc during the Mesozoic.     

Neotectonic evolution of the northwestward arched segment of the Central Anatolian Fault Zone,Central Anatolia,Turkey

Central Anatolia has undergone complex Neotectonic deformation since Late Miocene–Pliocene times. Many faults and intracontinental basins in this region were either formed, or have been reactivated, during this period. The eastern part of central Anatolia is dominated by a NE–SW-trending, left lateral transcurrent structure named the Central Anatolian fault zone located between Sivas in the northeast and west of Mersin in the southwest. Around the central part, it is characterized by transtensional depressions formed by left stepping and southward bending of the fault zone.Pre-Upper Miocene basement rocks of the region consist of the central Anatolian crystalline complex and a sedimentary cover of Tertiary age. These rock units were strongly deformed by N–S convergence. The entire area emerged to become the site of erosion and formed a vast plateau before the Late Miocene. A NE–SW-trending extensional basin developed on this plateau in Late Miocene–Early Pliocene times. Rock units of this basin are characterized by a thick succession of pyroclastic rocks intercalated with calcalkaline–alkaline volcanics. The volcanic sequence is unconformably overlain by Pliocene lacustrine–fluviatile deposits intercalated with ignimbrites and tuffs. Thick, coarse grained alluvial/colluvial fan deposits of marginal facies and fine grained clastics and carbonates of central facies display characteristic synsedimentary structures with volcanic intercalations. These are the main lines of evidence for development of a new transtensional Hırka–Kızılırmak basin in Pliocene times. Reactivation of the main segment of the Central Anatolian fault zone has triggered development of depressions around the left stepping and southward bending of the central part of this sinistral fault zone in the ignimbritic plateau during Late Pliocene–Quaternary time. These transtensional basins are named the Tuzla Gölü and Sultansazlığı pull-apart basins. The Sultansazlığı basin has a lazy S to rhomboidal shape and displays characteristic morphologic features including a steep and stepped western margin, large alluvial and colluvial fans, and a huge composite volcano (the Erciyes Dağı).The geometry of faulting and formation of pull-apart basins can be explained within the framework of tectonic escape of the wedge-like Anatolian block, bounded by sinistral East Anatolian fault zone and dextral North Anatolian transform fault zone. This escape may have been accomplished as lateral continental extrusion of the Anatolian Plate caused by final collision of the Arabian Plate with the Eurasian Plate.     

华北地区上新世至第四纪断裂作用型式与左旋扩展

华北地区包含两个新生代引张构造域,即太行山以西的鄂尔多斯周缘地堑系和以东的华北－渤海平原盆地。鄂尔多斯周缘地堑系上新世～第四纪的断裂作用表征为正向倾滑活动为主,同时具有右旋或左旋走滑分量的运动型式,指示了ＮＷ－ＳＥ向地壳引作用,华北－渤海盆地内上新世～第四纪的断裂作用发生在ＮＮＥ至ＮＥ走向的断鲜明带上,具有右旋和正向倾滑的斜向运动特征,ＥＷ走向的秦岭断裂系华北引张构造域的东界,表现为右旋走滑,与Ｅ     

Tectonic interpretations of enigmatic structures in the North Anatolian fault zone

Two geometrically distinct groups of syn-sedimentary and post-depositional mesofaults and joints cut Neogene-Quaternary sediments in basins situated along the convex-northwards arc of the North Anatolian fault zone between Çerkes and Erbaa. One group comprises second-order fractures interpreted as having developed during episodes of right-lateral shear along the fault zone, while the morphologically identical fractures in the other group have been interpreted as secondary products of left-lateral shear; thus apparently implying one or more former episodes of eastwards motion of the Anatolian scholle. Because such a reversal of motion would be counter to the well-established westward escape of Anatolia the structures have been called anomalous or incompatible.Alternative hypotheses which have been advanced to explain the development of the anomalous mesofractures include: localized reversals related to displacements of rigid blocks acting as buttresses within basins; selective operation of intra-pull-apart strike-slip faults; stress release; the coincidence of the present western sector of the fault with an older left-lateral fault zone; and the influence of a North Turkish neotectonic stress regime.     

东昆仑断裂带西大滩段晚第四纪古地震历史

对东昆仑断裂带西大滩段进行了断错地貌填图和古地震探槽揭露,共揭露出9次古地震事件,它们的年龄分别为39090±2348aB.P.,27780±2360aB.P.,24100±1451aB.P.,19850±1690aB.P.,12670±714aB.P.,8980±544aB.P.,6380±388aB.P.,4425±265aB.P.和3030±182aB.P.。古地震重复间隔分别为11310±2880a,3680±2211a,4250±1879a,7180±1392a,3690±897a,2600±668a,1955±470a,1395±321a和3030±182a。结果表明,西大滩段晚第四纪古地震活动具有准周期性,其中7次古地震事件发生时间与东昆仑断裂带库赛湖段古地震事件的发生时间非常接近,这意味着东昆仑断裂带库赛湖段和西大滩段既可以独立破裂形成中强地震,也可以同时发生破裂形成强震。东昆仑断裂带的古地震活动历史对于认识该断裂的破裂特征和强震复发规律具有重要的意义。     

玉树断裂带左旋走滑活动标志及其几何学 与运动学特征

玉树断裂带位于甘孜-玉树断裂带北西段,是一条总体呈NWW向展布的左旋走滑活动断裂带.沿断裂带发育错断水系与冲沟、拉分盆地、地震地表破裂与断裂破碎带等一系列反映玉树断裂带左旋走滑活动的典型地质-地貌标志.在室内遥感解译的基础上,结合最新的野外实地调查成果,对沿玉树断裂带上反映其左旋走滑活动的地质-地貌标志进行了总结,并对断裂带的几何学与运动学特征进行了综合分析.结果表明,玉树断裂带总长约150km,总体走向120～130°,自西向东可划分为呈左阶雁列分布的陇蒙达-结隆段、结隆-结古段和结古-查那扣段3段.沿该断裂带发育的串珠状拉分断陷盆地规模的大小反映出玉树断裂带自西向东拉张效应逐渐减弱、挤压效应逐渐增强的特点.玉树2010年7.1级地震的宏观震中处于晚第四纪活动性最为显著的中段,而仪器震中恰好处于该断裂带的不连续部位,进一步证明雁列走滑活动断裂带上的不连续部位通常是强震活动的初始破裂区域.