振荡水柱波能装置冲击式空气透平优化数值模拟研究

冲击式空气透平是振荡水柱式波能发电装置的二级能量转换装置,具有自启动性能好、在大流量系数区保持较高效率等优势,近年来应用越来越广泛.有学者提出在冲击式透平动叶片尖端安装环结构的设计,可以改善动叶片叶尖间隙处的气流流动形态,提高透平的工作性能.依托于此观点,构建了安装有环结构的冲击式透平的三维定常数值模型,并通过网格数量...     

水平轴潮流能叶轮尖速比特性分析研究

针对设计尖速比对水平轴潮流能叶轮动力特性的影响问题开展研究工作。基于叶素-动量理论建立叶轮动力特性仿真模型,以叶片数量分别为2、3、4的叶轮为对象,考察设计尖速比对叶轮的功率系数的影响。研究结果表明:设计尖速比越大的叶轮,其最大效率也越高;叶片数量多的叶轮,其功率系数略优于叶片数量少的叶片。结合分析结果,给出了水平轴潮流能叶轮的设计尖速比的选择建议。     

基于M-BEMT2.0研究串列海流发电机的水动力性能

海流发电机(MCT)是开发海洋可再生能源的重要装置。在预测海流发电机水动力性能方面,修正叶素动量理论(M-BEMT)方法被验证是一种简单有效的方法。为了进一步提高M-BEMT方法的适用性和准确性,基于M-BEMT方法开发M-BEMT2.0方法包括时均法(TA-BEMT2.0)和瞬态积分法(TI-BEMT2.0),新方法考虑了来流的轴向非均匀性和周向非均匀性。首先使用文献的试验结果验证均匀来流时新方法的适用性。然后使用计算流体力学(CFD)计算结果验证非均匀来流时新方法的适用性。最后结合新方法和CFD方法深入研究两个串列排布海流发电机(MCTA)的水动力性能。基于M-BEMT2.0研究发现,均匀来流时计算结果与试验结果基本吻合,非均匀来流时新方法的计算结果优于M-BEMT的计算结果。对于MCTA,当第一个MCT的叶尖速度比越大,第二个MCT功率比和推力比恢复到90%的距离越短。     

水平轴海流能发电机叶片设计与性能分析

全球海洋蕴藏着丰富的海流能,合理利用海流能可以有效缓解能源危机。以额定工况下获能系数达到最大值为目标,利用叶素-动量理论设计了150 kW水平轴海流能发电机的叶片。使用叶素-动量理论结合普朗特修正和葛劳渥修正的方法,预测了海流机在不同尖速比以及不同桨距角下的水动力性能,分析了攻角和载荷沿着叶片径向的分布规律。使用CFD方法计算了海流机在不同尖速比下的水动力性能,并与理论方法的计算结果进行了比较。理论方法和CFD方法的结果均表明,所设计的海流机最大获能系数位于设计尖速比处,证明基于叶素-动量理论的水平轴海流机叶片设计方法是有效的。     

基于实密度的卧式浪流轮机水槽实验研究分析

实密度是影响轮机获能特性的关键因素之一。文中以卧式轮机实密度为基变量,以其获能系数为主要考察点,对3种实密度卧式轮机进行水槽实验方案设计和水动力性能研究。实验分别对水流流速、轮机旋转角速度、主轴转矩以及功率进行测量,并对其对主轴的扭矩、轮机的获能系数以及叶片的旋转特性进行定量分析,最终证实了该卧式轮机的单一运行特性。通过绘制基于实密度的轮机转矩—转角曲线、获能系数—尖速比曲线和轮机功率—尖速比曲线,阐明了实密度影响卧式轮机获能水动力性能的规律,即其获能系数和发电功率都随着工况速比呈先增后降趋势。实密度较低轮机因浪流流失而获得能量小,但实密度过高轮机会导致叶片间湍流涌动,加速叶片失速特性而影响轮机获能。这为卧式浪流轮机结构优化提供了可靠依据和借鉴。     

用于振荡水柱波能系统的径流式空气透平数值模拟研究

径流式空气透平是振荡水柱式波能发电系统的二级能量转换装置,因其具有结构简单、输出扭矩大、轴向推力小的优势,得到了越来越多的关注。采用计算流体力学软件Ansys-Fluent 12.0,通过数值模拟方法考察了不同转子叶片稠度对径流式空气透平定常无量纲评价参数的影响规律。研究结果表明:虽然径流式透平可在双向气流下实现单向旋转,但当气流通过方向不同时,透平的定常工作性能存在明显差异,这与传统轴流式透平完全不同;此外,稠度对透平效率的影响在不同流量系数范围内也不同。因此,综合考虑气流流向、透平整个工作范围内输出效率,推荐采用的转子叶片稠度为2.34。     

Numerical and Experimental Study of the 3D Effect on Connecting Arm of Vertical Axis Tidal Current Turbine

Vertical axis tidal current turbine is a promising device to extract energy from ocean current. One of the important components of the turbine is the connecting arm, which can bring about a significant effect on the pressure distribution along the span of the turbine blade, herein we call it 3D effect. However, so far the effect is rarely reported in the research, moreover, in numerical simulation. In the present study, a 3D numerical model of the turbine with the connecting arm was developed by using FLUENT software compiling the UDF (User Defined Function) command. The simulation results show that the pressure distribution along the span of blade with the connecting arm model is significantly different from those without the connecting arm. To facilitate the validation of numerical model, the laboratory experiment has been carried out by using three different types of NACA aerofoil connecting arm and circle section connecting arm. And results show that the turbine with NACA0012 connecting arm has the best start-up performance which is 0.346 m/s and the peak point of power conversion coefficient is around 0.33. A further study has been performed and a conclusion is drawn that the aerofoil and thickness of connecting arm are the most important factors on the power conversion coefficient of the vertical axis tidal current turbine.     

The effects of blade twist and nacelle shape on the performance of horizontal axis tidal current turbines

The paper presents the effects of blade twist and nacelle shape on the performance of horizontal axis tidal current turbines using both analytical and numerical methods. Firstly, in the hydrodynamic design procedure, the optimal profiles of untwisted and twisted blades and their predicted theoretical turbine performance are obtained using the genetic algorithm method. Although both blade profiles produce desired rated rotational speed, the twisted blade achieves higher power and thrust performance. Secondly, numerical simulation is performed using sliding mesh technique to mimic rotating turbine in ANSYS FLUENT to validate the analytical results. The Reynolds-Averaged Navier-Stokes (RANS) approximation of the turbulence parameters is applied to obtain the flow field around the turbine. It is found that power and axial thrust force from BEMT (Blade Element Momentum Theory) method are under-predicted by 2% and 8% respectively, compared with numerical results. Afterwards, the downstream wake field of the turbine is investigated with two different nacelle shapes. It is found that the rotor performance is not significantly affected by the different nacelle shapes. However, the structural turbulence caused by the conventional nacelle is stronger than that by the NACA-profiled shape, and the former can cause detrimental effect on the performance of the downstream turbines in tidal farms.     

水平轴潮流能发电装置结构对其水动力性能的影响

为研究水平轴潮流能发电装置结构对其水动力性能的影响,运用格子玻尔兹曼(LBM)方法,建立水平轴潮流能发电装置的数值模拟分析模型,对水轮机在不同尖速比工况下的水动力性能进行模拟。将模拟结果与同工况水池拖曳实验得到的数据相对比,二者捕获能系数误差在2%左右,验证了LBM方法的可行性和准确性。在此基础上利用LBM方法研究机舱和立柱结构对水轮机特性的影响,得到其对水轮机捕获效率的影响规律。     

Numerical and Experimental Analysis of A Vertical-Axis Eccentric-disc Variable-Pitch Turbine(VEVT)

A combined experimental and numerical investigation is carried out to study the performance of a vertical-axis eccentric-disc variable-pitch turbine(VEVT). A scheme of eccentric disc pitch control mechanism based on doubleblock mechanism is proposed. The eccentric control mechanism and the deflection angle control mechanism in the pitch control structure are designed and optimized according to the functional requirements of the turbine, and the three-dimensional model of the turbine is established. Kinematics analysis of the eccentric disc pitch control mechanism is carried out. Kinematics parameters and kinematics equations which can characterize its motion characteristics are derived. Kinematics analysis and simulation are carried out, and the motion law of the corresponding mechanical system is obtained. By analyzing the force and motion of blade of VEVT, the expressions of the important parameters such as deflection angle, attack angle and energy utilization coefficient are obtained. The lateral induced velocity coefficient is acquired by momentum theorem, the hydrodynamic parameters such as energy utilization coefficient are derived, and the hydrodynamic characteristics of VEVT are also obtained. The experimental results show that the turbine has good energy capture capability at different inflow velocities of different sizes and directions, which verifies that VEVT has good self-startup performance and high energy capture efficiency.     

Design and Test of 1/5th Scale Horizontal Axis Tidal Current Turbine

Tidal current energy is prominent and renewable. Great progress has been made in the exploitation technology of tidal current energy all over the world in recent years, and the large scale device has become the trend of tidal current turbine (TCT) for its economies. Instead of the similarity to the wind turbine, the tidal turbine has the characteristics of high hydrodynamic efficiency, big thrust, reliable sealing system, tight power transmission structure, etc. In this paper, a 1/5th scale horizontal axis tidal current turbine has been designed, manufactured and tested before the full scale device design. Firstly, the three-blade horizontal axis rotor was designed based on traditional blade element momentum theory and its hydrodynamic performance was predicted in numerical model. Then the power train system and stand-alone electrical control unit of tidal current turbine, whose performances were accessed through the bench test carried out in workshop, were designed and presented. Finally, offshore tests were carried out and the power performance of the rotor was obtained and compared with the published literatures, and the results showed that the power coefficient was satisfactory, which agrees with the theoretical predictions.     

水平轴潮流能水轮机数值模拟方法对比分析

叶素动量理论和CFD方法是水平轴潮流能水轮机性能分析中运用较为广泛的数值模拟方法,文中结合小尺寸水轮机模型试验,对比分析了叶素动量理论和CFD方法在水轮机性能分析中的准确性和适用性.验证结果表明:叶素动量理论和CFD方法均能对水轮机的性能进行预报,且CFD精度高于动量叶素理论;大尖速比时,动量叶素理论偏离较高,不再适合性能预报;在小尖速比下,建议采用RNGk-ε模型的CFD方法进行分析计算;动量叶素理论适合设计初期设计方案的对比分析,而CFD方法适合对设计结果的验证校核和详细分析.     

Influences of winglets on the hydrodynamic performance of horizontal axis current turbines

A novel tidal turbine with winglet is given, and the influences of winglets on the hydrodynamic performance of horizontal axis current turbines (HACT) are investigated. The incompressible Reynolds-Averaged Navier–Stokes (RANS) Equations with the k − ω shear stress transport (SST) turbulence model are solved. Two HACTs with the winglet that bent towards the pressure side or suction side are designed as the conceptual designs. The pressure distribution and tip vortices are analyzed and compared to investigate the effect of the winglets. Based on the simulation results, the parameter study of the winglet is performed to investigate the effect of length, tip chord and cant angle on the hydrodynamic performance. Results demonstrate that the numerical simulation shows good agreement with the experimental data. The performance of HACT could be improved only when the winglet bends towards the suction side. At the optimum tip speed ratio (TSR), the best design can achieve 4.66% power increase rate compared with that of the baseline turbine. The proper length, tip chord and cant angle of the winglet could improve power at the whole conditions.     

潮流能水轮机仿真及尾流场分析

为了研究潮流能水轮机尾流场的变化规律,本文在水平轴水轮机现有理论基础上,采用计算流体力学技术建立了数值模型,计算了水轮机的功率特性,进行了网格独立性验证,比较了模型中旋转区域不同对结果的影响。仿真结果与试验结果进行了对比分析,验证了数值模型的有效性。研究了全工况下尾流场速度衰减随尖速比和距离变化的规律,结果显示在小尖速比下尾流场速度恢复情况相对大尖速比下较好;靠近水轮机轮毂中心线位置处,衰减相对较大。研究建议水轮机在同等功率表现下尽量选择在小尖速比下工作,水轮机组在实际排列时避免采用成列布置,水轮机设计阶段应综合考虑功率特性和尾流场衰减。本文研究内容可以为潮流能水轮机的研究以及阵列式应用提供参考。     

Hashin Failure Theory Based Damage Assessment Methodology of Composite Tidal Turbine Blades and Implications for the Blade Design

A damage assessment methodology based on the Hashin failure theory for glass fiber reinforced polymer (GFRP) composite blade is proposed. The typical failure mechanisms including the fiber tension/compression and matrix tension/compression are considered to describe the damage behaviors. To give the flapwise and edgewise loading along the blade span, the Blade Element Momentum Theory (BEMT) is adopted. In conjunction with the hydrodynamic analysis, the structural analysis of the composite blade is cooperatively performed with the Hashin damage model. The damage characteristics of the composite blade, under normal and extreme operational conditions, are comparatively analyzed. Numerical results demonstrate that the matrix tension damage is the most significant failure mode which occurs in the mid-span of the blade. The blade internal configurations including the box-beam, I-beam, left-C beam and right-C beam are compared and analyzed. The GFRP and carbon fiber reinforced polymer (CFRP) are considered and combined. Numerical results show that the I-beam is the best structural type. The structural performance of composite tidal turbine blades could be improved by combining the GFRP and CFRP structure considering the damage and cost-effectiveness synthetically.     

Experimentally validated numerical method for the hydrodynamic design of horizontal axis tidal turbines

Although a lot can be learnt from technology transfer from wind turbines and ship propellers, there have been a few experiments investigating marine current turbines. As a result, a study has been carried out on the power, thrust and cavitation characteristics of 1/20th scale model of a possible 16 m diameter horizontal axis tidal turbine. Cavitation tunnel experiments for different blade pitch settings have been compared with simulations based on a developed blade element-momentum theory. This theory has been shown to provide a satisfactory representation of the experimental turbine performance characteristics. As an example application, the developed theory has been used to design possible horizontal axis tidal turbines for the tidal flows around Portland Bill. The results show that there is a clear balance between design loads and optimisation of energy yields.     

浮式风机气动—水动—气弹性耦合响应数值模拟

随着海上风电产业的快速发展,大型浮式风机逐渐从概念设计走向工程应用,但仍面临较大的挑战。一方面,在风、浪等环境载荷的作用下,浮式风机的气动载荷和水动力响应之间存在明显的相互干扰作用;另一方面,风力机大型化使得叶片细、长、薄的特点愈发突出,叶片柔性变形十分显著,这会影响到浮式风机的耦合性能。基于两相流CFD求解器naoe-FOAM-SJTU,结合弹性致动线模型和等效梁理论,建立了浮式风机气动—水动—气弹性耦合响应计算模型,并对规则波和剪切风作用下Spar型浮式风机的气动—水动—气弹性耦合响应进行了数值模拟分析。结果表明,风力机气动载荷使得叶片挥舞变形十分显著,而叶片的扭转变形会明显降低风力机的气动载荷。此外,风力机气动载荷会增大浮式平台的纵荡位移和纵摇角,同时,浮式平台运动响应会导致风力机气动载荷产生大幅度周期性变化。进一步地,叶片结构变形响应会使得浮式风机尾流场的速度损失和湍动能有所降低。     

潮流能发电装置支撑结构对水轮机水动力学性能影响研究

水平轴潮流能水轮机在工作过程中,由于支撑结构的存在,会使水轮机周围流场中的潮流流向、流速等参数发生不同程度的改变,进而影响水轮机的性能和发电装置的稳定性。为了研究支撑结构对水轮机水动力学性能的影响规律,以某100 k W单立柱座底式潮流能发电装置的支撑结构为研究对象,采用CFD方法,分别在正、反向来流时采用不同支撑结构的共六种工况下,对潮流能水轮机模型的获能和受力进行数值模拟。通过水槽模型试验,验证数值模拟的可靠性。研究结果表明:支撑结构对水轮机的水动力学性能的影响不容忽视,针对所研究的支撑结构,在正向来流时水轮机的获能系数降幅约30%,轴向力系数降幅约28%;反向来流时的降幅更大,分别约为63%和41%。     

波浪作用下基于不同负载的一种Savonius型水轮机捕能性能研究

通过水轮机捕能是当前常用的海洋能利用方式之一。桨叶作为水轮机关键部件,其性能一直是研究的重点。针对目前波浪条件下带负载运转的Savonius型水轮机相关捕能性能研究较少的情况,采用数值仿真方法,结合对应工况条件的物理试验,研究了一种Savonius型水轮机在不同波浪环境下带负载运转的捕能性能。采用Star CCM+仿真软件,建立数值波浪水池,设置环境参数,划分网格调整变量进行水轮机运转的水动力模型数值研究。在造波试验水池中利用推板改变波浪周期与波高,进行水轮机运转的物理试验。采集在不同负载下水轮机桨叶的转速和扭矩数据,计算并分析功率等参数,总结变化趋势,评价捕能效果。研究发现水轮机在1.6 s的波浪周期条件下,桨叶承受1.5 N·m负载时达到最佳捕能效果,其功率为23 W。为实际海域中水轮机桨叶的结构设计研究和相关工程应用提供参考。     

基于LES的ROV导管推进器梢隙流动数值研究

导管推进器是一种普遍应用于无人遥控潜水器（ROV）等潜器中的特种推进器。在桨叶与导管之间的梢隙中存在非常复杂的流动,本研究基于大涡模拟（LES）对导管推进器的梢隙流动进行了数值模拟分析。通过对时间步长的收敛性研究,建立两套基于不同网格类型的计算模型。将计算结果与试验进行对比,比较两种不同类型网格模拟结果的差异发现,切割体网格能够更好地捕捉到泄涡的细节,并结合梢隙流场的原理分析泄涡发展的过程,梢隙涡的驱动力是吸力面与压力面之间的压差。此外,随着进速系数增大,梢隙周向的涡管轴向分布范围减小,主泄涡发生位置延后,泄出涡的长度和数量都有所减少。