An Analytical Model for the Two-Scalar Covariance Budget Inside a Uniform Dense Canopy

The two-scalar covariance budget is significant within the canopy sublayer (CSL) given its role in modelling scalar flux budgets using higher-order closure principles and in estimating the segregation ratio for chemically reactive species. Despite its importance, an explicit expression describing how the two-scalar covariance is modified by inhomogeneity in the flow statistics and in the vertical variation in scalar emission or uptake rates within the canopy volume remains elusive even for passive scalars. To progress on a narrower version of this problem, an analytical solution to the two-scalar covariance budget in the CSL is proposed for the most idealized flow conditions: a stationary and planar homogeneous flow inside a uniform and dense canopy with a constant leaf area density distribution. The foliage emission (or uptake) source strengths are assumed to vary exponentially with depth while the forest floor emission is represented as a scalar flux. The analytical solution is a superposition of a homogeneous part that describes how the two-scalar covariance at the canopy top is transported and dissipated within the canopy volume, and an inhomogeneous part governed by local production mechanisms of the two-scalar covariance. The homogeneous part is primarily described by the canopy adjustment length scale, and the attenuation coefficients of the turbulent kinetic energy and the mean velocity. Conditions for which the vertical variation of the two-scalar covariance is controlled by the rapid attenuation in the mean velocity and turbulent kinetic energy profiles, vis-à-vis the vertical variation of the scalar source strength, are explicitly established. This model also demonstrates how dissimilarity in the emissions from the ground, even for the extreme binary case with one scalar turned ‘on’ and the other scalar turned ‘off’, modifies the vertical variation of the two-scalar covariance within the CSL. To assess its applicability to field conditions, the analytical model predictions were compared with observations made at two different forest types—a sparse pine forest at the Hyytiälä SMEAR II-station (in Finland) and a dense alpine hardwood forest at Lavarone (in Italy). While the model assumptions do not represent the precise canopy morphology, attenuation properties of the turbulent kinetic energy and the mean velocity, observed mixing length, and scalar source attenuation properties for these two forest types, good agreement was found between measured and modelled two scalar covariances for multiple scalars and for the triple moments at the Hyytiälä site.     

Footprints and Fetches for Fluxes over Forest Canopies with Varying Structure and Density

A stochastic trajectory model was used to estimate scalar fluxfootprints in neutral stabilityfor canopies of varying leaf area distributions andleaf area indices. An analytical second-order closure model wasused to predict mean wind speed, second moments and the dissipationrate of turbulent kinetic energy within a forest canopy.The influence of source vertical profile on the flux footprint wasexamined. The fetch is longer for surface sourcesthan for sources at higher levels in the canopy. In order tomeasure all the flux components, and thus the total flux, with adesired accuracy, sources were located at the forest floor in thefootprint function estimation. The footprint functions werecalculated for five observation levels above the canopy top. Itwas found that at low observation heights both canopy density andcanopy structure affect the fetch. The higher abovethe canopy top the flux is measured, the more pronounced is the effectof the canopy structure. The forest fetch for flux measurements isstrongly dependent on the required accuracy: The 90% flux fetchis greater by a factor of two or more compared to the 75% fetch. Theupwind distance contributing 75% of flux is as large as 45 timesthe difference between canopy height and the observation heightabove the canopy top, being even larger for low observationlevels.     

The Effect of Chessboard Variability of the Surface Fluxes on the Aggregated Turbulence Fields in a Convective Atmospheric Surface Layer

To what degree the variability of surface features can be identified in the turbulent signals observed in the atmospheric boundary layer is still an unresolved problem. This was investigated by conducting an analytical experiment for a one-dimensional 'chessboard'-type surface-flux distribution on the basis of local free convection scaling. The results showed that, due to their nonlinear dependency on the surface fluxes, the dimensionless gradients of the mean quantities and the dimensionless standard deviations are altered by the surface-flux variability. Furthermore, passive scalars, such as humidity, are considerably more sensitive to surface variability than the main active scalar, temperature. However, the response of the gradients of the mean quantities is fairly negligible in the range of variability studied herein as compared to that of the standard deviations, which were found to be more sensitive to the surface-flux variability. In addition, the phase difference between the active and the passive scalar flux distribution strongly affects the passive scalar turbulence. This dissimilarity between passive and active scalars, or between passive scalars when their source distributions are different, brings into question the use of variance methods for the measurement of a scalar flux, such as evaporation, over variable surfaces. The classical Bowen ratio method, which depends on the validity of the Reynolds analogy for the vertical gradients of the mean quantities, was shown to be relatively more robust. However, under conditions of strong surface variability, it can also be expected to fail.     

Influence of Source/Sink Distributions on Flux–Gradient Relationships in the Roughness Sublayer Over an Open Forest Canopy Under Unstable Conditions

The flux–gradient relationships in the unstable roughness sublayer (RSL) over an open canopy of black spruce forest were examined using long-term observations from an instrumented tower. The observed gradients normalised with the surface fluxes and height above the zero-plane displacement showed differences from a universal function established in the surface layer. The magnitude of differences was not constant throughout the year even at the same observation height. Also the magnitude of the differences was different for each scalar, and scalar similarity in the context of the flux–gradient relationship did not always hold. The variation of the differences was explained by the relative contribution of overstorey vegetation to the total flux from the entire ecosystem. This suggests that a mismatch of the vertical source/sink distributions between scalars leads to a different strength of the near-field dispersion effect for each scalar, and this resulted in inequality of eddy diffusivity among scalars in the RSL. An empirical method that predicts the magnitude of differences is proposed. With this method, it is possible to estimate the eddy diffusivity of scalars provided that the relative contribution of overstorey vegetation to the total flux from the ecosystem is known. Also this method can be used to estimate the eddy diffusivity for scalars whose primary sources are at ground level, such as methane and nitrous oxide.     

Estimating Co2 Source/Sink Distributions Within A Rice Canopy Using Higher-Order Closure Model

Source/sink strengths and vertical fluxdistributions of carbon dioxide within and above arice canopy were modelled using measured meanconcentration profiles collected during aninternational rice experiment in Okayama, Japan (IREX96). The model utilizes an Eulerian higher-orderclosure approach that permits coupling of scalar andmomentum transport within vegetation to infer sourcesand sinks from mean scalar concentration profiles; theso-called `inverse problem'. To compute the requiredvelocity statistics, a Eulerian second-order closuremodel was considered. The model well reproducedmeasured first and second moment velocity statisticsinside the canopy. Using these modelled velocitystatistics, scalar fluxes within and above the canopywere computed and compared with CO<sub>2</sub>eddy-correlation measurements above the canopy. Goodagreement was obtained between model calculations offluxes at the top of the canopy and measurements. Close to the ground, the model predicted higherrespiratory fluxes when the paddy was drained comparedto when it was flooded. This is consistent with thefloodwater providing a barrier to diffusion ofCO<sub>2</sub> from the soil to the atmosphere. TheEulerian sources and flux calculations were alsocompared to source and flux distributions estimatedindependently using a Lagrangian Localized Near Fieldtheory, the first study to make such a comparison.Some differences in source distributions werepredicted by these analyses. Despite this, thecalculated fluxes by the two approaches compared wellprovided a closure constant, accounting for theinfluence of `near-field' sources in the Eulerian fluxtransport term, was given a value of 1.5 instead ofthe value of 8 found in laboratory studies.     

A Simple Model for the Vertical Transport of Reactive Species in the Convective Atmospheric Boundary Layer

We have developed a simple, steady-state, one-dimensional second-order closure model to obtain continuous profiles of turbulent fluxes and mean concentrations of non-conserved scalars in a convective boundary layer without shear. As a basic tool we first set up a model for conserved species with standard parameterizations. This leads to formulations for profiles of the turbulent diffusivity and the ratio of temperature-scalar covariance to the flux of the passive scalar. The model is then extended to solving, in terms of profiles of mean concentrations and fluxes, the NO _x –O₃ triad problem. The chemical reactions involve one first-order reaction, the destruction of NO₂ with decay time τ, and one second-order reaction, the destruction of NO and O₃ with the reaction constant k. Since the fluxes of the sum concentrations of NO _x = NO + NO₂ and O₃ + NO₂ turn out to be constant throughout the boundary layer, the problem reduces to solving two differential equations for the concentration and the flux of NO₂. The boundary conditions are the three surface fluxes and the fluxes at the top of the boundary layer, the last obtained from the entrainment velocity, and the concentration differences between the free troposphere and the top of the boundary layer. The equations are solved in a dimensionless form by using 1/(kτ) as the concentration unit, the depth h of the boundary layer as the length unit, the convective velocity scale w _* as the velocity unit, and the surface temperature flux divided by w _* as the temperature unit. Special care has been devoted to the inclusion of the scalar–scalar covariance between the concentrations of O₃ and NO. Sample calculations show that the fluxes of the reactive species deviate significantly from those of non-reactive species. Further, the diffusivities, defined by minus the flux divided by the concentration gradient may become negative for reactive species in contrast to those of non-reactive species, which in the present model are never negative.     

Estimating Heat Sources And Fluxes In Thermally Stratified Canopy Flows Using Higher-Order Closure Models

Over the past two decades, several inverse methods have been proposed to estimatescalar source and sink strengths from measured mean concentration profiles withinthe canopy volume (hereafter termed the `inverse' problem). These inverse methodscommonly assumed neutral atmospheric stability conditions for the entire canopyvolume. For non-neutral conditions, atmospheric stability corrections in inverseschemes were limited to adjusting the integral time scale or other flow statistics tomatch well-established surface-layer similarity relations above the canopy. Suchstability corrections do not explicitly consider the local stability effects within thecanopy volume. Currently, there is no satisfactory inverse scheme that explicitlyaccounts for local atmospheric stability for canopy turbulence. A Eulerian inversemethod that explicitly accounts for local atmospheric stability within the canopy isdeveloped using second-order closure principles. Field testing the method is conductedusing temperature measurements from two field experiments collected in an even-ageduniform loblolly pine forest. It is demonstrated that by accounting for local atmospheric stability in the inversion scheme, the agreement between modelled sensible heat flux calculations and measurements improve by 60% for stable conditions, 10% for near-neutral conditions and 20% for unstable conditions     

Scalar Transport over Forested Hills

Numerical simulations of scalar transport in neutral flow over forested ridges are performed using both a 1.5-order mixing-length closure scheme and a large-eddy simulation. Such scalar transport (particularly of CO₂) has been a significant motivation for dynamical studies of forest canopy–atmosphere interactions. Results from the 1.5-order mixing-length simulations show that hills for which there is significant mean flow into and out of the canopy are more efficient at transporting scalars from the canopy to the boundary layer above. For the case with a source in the canopy this leads to lower mean concentrations of tracer within the canopy, although they can be very large horizontal variations over the hill. These variations are closed linked to flow separation and recirculation in the canopy and can lead to maximum concentrations near the separation point that exceed those over flat ground. Simple scaling arguments building on the analytical model of Finnigan and Belcher (Q J Roy Meteorol Soc 130:1–29, 2004) successfully predict the variations in scalar concentration near the canopy top over a range of hills. Interestingly this analysis suggests that variations in the components of the turbulent transport term, rather than advection, give rise to the leading order variations in scalar concentration. The scaling arguments provide a quantitative measure of the role of advection, and suggest that for smaller/steeper hills and deeper/sparser canopies advection will be more important. This agrees well with results from the numerical simulations. A large-eddy simulation is used to support the results from the mixing-length closure model and to allow more detailed investigation of the turbulent transport of scalars within and above the canopy. Scalar concentration profiles are very similar in both models, despite the fact that there are significant differences in the turbulent transport, highlighted by the strong variations in the turbulent Schmidt number both in the vertical and across the hill in the large-eddy simulation that are not represented in the mixing-length model.     

Investigating a Hierarchy of Eulerian Closure Models for Scalar Transfer Inside Forested Canopies

Modelling the transfer of heat, water vapour, and CO₂ between the biosphere and the atmosphere is made difficult by the complex two-way interaction between leaves and their immediate microclimate. When simulating scalar sources and sinks inside canopies on seasonal, inter-annual, or forest development time scales, the so-called well-mixed assumption (WMA) of mean concentration (i.e. vertically constant inside the canopy but dynamically evolving in time) is often employed. The WMA eliminates the need to model how vegetation alters its immediate microclimate, which necessitates formulations that utilize turbulent transport theories. Here, two inter-related questions pertinent to the WMA for modelling scalar sources, sinks, and fluxes at seasonal to inter-annual time scales are explored: (1) if the WMA is to be replaced so as to resolve this two-way interaction, how detailed must the turbulent transport model be? And (2) what are the added predictive skills gained by resolving the two-way interaction vis-à-vis other uncertainties such as seasonal variations in physiological parameters. These two questions are addressed by simulating multi-year mean scalar concentration and eddy-covariance scalar flux measurements collected in a Loblolly pine (P. taeda L.) plantation near Durham, North Carolina, U.S.A. using turbulent transport models ranging from K-theory (or first-order closure) to third-order closure schemes. The multi-layer model calculations with these closure schemes were contrasted with model calculations employing the WMA. These comparisons suggested that (i) among the three scalars, sensible heat flux predictions are most biased with respect to eddy-covariance measurements when using the WMA, (ii) first-order closure schemes are sufficient to reproduce the seasonal to inter-annual variations in scalar fluxes provided the canonical length scale of turbulence is properly specified, (iii) second-order closure models best agree with measured mean scalar concentration (and temperature) profiles inside the canopy as well as scalar fluxes above the canopy, (iv) there are no clear gains in predictive skills when using third-order closure schemes over their second-order closure counterparts. At inter-annual time scales, biases in modelled scalar fluxes incurred by using the WMA exceed those incurred when correcting for the seasonal amplitude in the maximum carboxylation capacity (V _{cmax, 25}) provided its mean value is unbiased. The role of local thermal stratification inside the canopy and possible computational simplifications in decoupling scalar transfer from the generation of the flow statistics are also discussed.

“The tree, tilting its leaves to capture bullets of light; inhaling, exhaling; its many thousand stomata breathing, creating the air”. Ruth Stone, 2002, In the Next Galaxy

     

A Lagrangian Solution to the Relationship between Source Strength and Concentration Profile Under Conditions of Local Advection

We propose a two-dimensional Lagrangian analytical solution for relating source strength and concentration profiles within and above a plant canopy. The new solution describes passive scalar dispersion under conditions of local advection through a fetch correction function in a one-dimensional Lagrangian analytical dispersion model. The model is capable of predicting absolute concentration profiles of passive scalars for different fetches for situations in which the reference concentration is known or the background concentration is available. Tests of the model showed good agreement with measurements from field and wind-tunnel experiments.     

Experiments on scalar dispersion within a model plant canopy,part III: An elevated line source

An experiment is reported in which heat was released as a passive tracer from an elevated lateral line source within a model plant canopy, with h _s = 0.85 h _c (h _s and h _c being the source and canopy heights, respectively). A sensor assembly consisting of three coplanar hot wires and one cold wire was used to measure profiles of mean temperature % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaaiikamaana% aabaGaeqiUdehaaiaacMcaaaa!390C!\[(\overline \theta )\], temperature variance (Σ_θ ²), vertical and streamwise turbulent heat fluxes, and third moments of wind and temperature fluctuations. Conclusions were:

1. Despite the very heterogeneous flow within the canopy, the observed dispersive heat flux (due to spatial correlation between time-averaged temperature and vertical velocity) was small. However, there is evidence from the plume centroid (which was lower than h _s at the source) of systematic recirculating motions within the canopy.
2. The ratio % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaeq4Wdm3aaS% baaSqaaiabeI7aXjaab2gacaqGHbGaaeiEaaqabaGccaGGVaWaa0aa% aeaacqaH4oqCaaWaaSbaaSqaaiaab2gacaqGHbGaaeiEaaqabaaaaa!41DF!\[\sigma _{\theta {\text{max}}} /\overline \theta _{{\text{max}}} \] (of maximum values on vertical profiles) decreased from 1 near the source to an asymptotic value of 0.4 far downstream, in good agreement with previous experimental and theoretical work for concentration fluctuations in the surface layer well above the canopy.
3. The eddy diffusivity for heat from the line source (K _HL ) increased, downstream of the source, to a nearly constant ‘far-field’ vertical profile. Within the canopy, the far-field K _HL was an order of magnitude larger than K _HP , the equivalent diffusivity for a plane source; well above the canopy, the two were equal. The time scale defined by (far-field K _HL )/(vertical velocity variance) was independent of height within the canopy.
4. Budgets for temperature variance, vertical heat flux and streamwise heat flux are remarkably similar to the equivalent budgets for an elevated line source in the surface layer well above the canopy, except in the lower part of the canopy in the far field, where vertical transport is much more important than in the surface layer.
5. A random flight simulation of the mean height and depth of the temperature plume was generally in good agreement with experiment. However, details of the temperature and streamwise turbulent heat flux profiles were not correct, suggesting that the model formulation needs to be improved.

     

Flux contribution of coherent structures and its implications for the exchange of energy and matter in a tall spruce canopy

The flux contribution of coherent structures to the total exchange of energy and matter is investigated in a spruce canopy of moderate density in heterogeneous, complex terrain. The study deploys two methods of analysis to estimate the coherent exchange: conditional averages in combination with wavelet analysis, and quadrant analysis. The data were obtained by high-frequency single-point measurements using sonic anemometers and gas analysers at five observation heights above and within the canopy and subcanopy, and represent a period of up to 2.5 months. The study mainly addresses the momentum transfer and exchange of sensible heat throughout the roughness sublayer, while results are provided for the exchange of carbon dioxide and water vapour above the canopy. The magnitude of the flux contribution of coherent structures largely depends on the method of analysis, and it is demonstrated that these differences are attributed to differences in the sampling strategy between the two methods. Despite the differences, relational properties such as sweep and ejection ratios and the variation of the flux contribution with height were in agreement for both methods. The sweep phase of coherent structures is the dominant process close to and within the canopy, whereas the ejections gain importance with increasing distance to the canopy. The efficiency of the coherent exchange in transporting scalars exceeds that for momentum by a factor of two. The occurrence of coherent structures results in a flux error less than 4% for the eddy-covariance method. Based on the physical processes identified from the analysis of the ejection and sweep phases along the vertical profile in the roughness sublayer, a classification scheme for the identification of exchange regimes is developed. This scheme allows one to estimate the region of the canopy participating in the exchange of energy and matter with the above-canopy air under varying environmental conditions.     

Dispersion of a Passive Scalar Within and Above an Urban Street Network

The transport of a passive scalar from a continuous point-source release in an urban street network is studied using direct numerical simulation (DNS). Dispersion through the network is characterized by evaluating horizontal fluxes of scalar within and above the urban canopy and vertical exchange fluxes through the canopy top. The relative magnitude and balance of these fluxes are used to distinguish three different regions relative to the source location: a near-field region, a transition region and a far-field region. The partitioning of each of these fluxes into mean and turbulent parts is computed. It is shown that within the canopy the horizontal turbulent flux in the street network is small, whereas above the canopy it comprises a significant fraction of the total flux. Vertical fluxes through the canopy top are predominantly turbulent. The mean and turbulent fluxes are respectively parametrized in terms of an advection velocity and a detrainment velocity and the parametrization incorporated into a simple box-network model. The model treats the coupled dispersion problem within and above the street network in a unified way and predictions of mean concentrations compare well with the DNS data. This demonstrates the usefulness of the box-network approach for process studies and interpretation of results from more detailed numerical simulations.     

Large-eddy Simulation of Turbulent Flow across a Forest Edge. Part II: Momentum and Turbulent Kinetic Energy Budgets

Momentum and turbulent kinetic energy (TKE) budgets across a forest edge have been investigated using large-eddy simulation (LES). Edge effects are observed in the rapid variation of a number of budget terms across this vegetation transition. The enhanced drag force at the forest edge is largely balanced by the pressure gradient force and by streamwise advection of upstream momentum, while vertical turbulent diffusion is relatively insignificant. For variance and TKE budgets, the most important processes at the forest edge are production due to the convergence (or divergence) of the mean flow, streamwise advection, pressure diffusion and enhanced dissipation by canopy drag. Turbulent diffusion, pressure redistribution and vertical shear production, which are characteristic processes in homogeneous canopy flow, are less important at the forest transition. We demonstrate that, in the equilibrated canopy flow, a substantial amount of TKE produced in the streamwise direction by the vertical shear of the mean flow is redistributed in the vertical direction by pressure fluctuations. This redistribution process occurs in the upper canopy layers. Part of the TKE in the vertical velocity component is transferred by turbulent and pressure diffusion to the lower canopy levels, where pressure redistribution takes place again and feeds TKE back to the streamwise direction. In this TKE cycle, the primary source terms are vertical shear production for streamwise velocity variance and pressure redistribution for vertical velocity variance. The evolution of these primary source terms downwind of the forest edge largely controls the adjustment rates of velocity variances.     

Turbulent Flux Measurements Above and Below the Overstory of a Boreal Aspen Forest

Turbulent flux measurements both above and beneath the canopy of a boreal aspen forest are described. Velocity skewness showed that, beneath the aspen canopy, turbulence was dominated by intermittent, downward penetrating gusts. Eulerian horizontal length scales calculated from integration of the autocorrelation function or spectral peaks were 9.0 and 1.4 times the mean aspen height of 21.5 m respectively. Above-canopy power spectral slopes for all velocity components followed the -2/3 power law, whereas beneath-canopy slopes were closer to -1 and showed a spectral short cut in the horizontal and vertical components. Cospectral patterns were similar both above and beneath the canopy. The Monin–Obukhov similarity function for the vertical wind velocity variance was a well-defined function of atmospheric stability, both above and beneath the canopy. Nocturnal flux underestimation and departures of this similarity function from that expected from Monin–Obukhov theory were a function of friction velocity. Energy balance closure greater than 80% was achieved at friction velocities greater than 0.30 and 0.10 m s-1, above and below the aspen canopy, respectively. Recalculating the latent heat flux using various averaging periods revealed a minimum of 15 min were required to capture 90% of the 30-min flux. Linear detrending reduced the flux at shorter averaging periods compared to block averaging. Lack of energy balance closure and erratic flux behaviour led to the recalculation of the latent and sensible heat fluxes using the ratio of net radiation to the sum of the energy balance terms.     

Turbulent Transport of Momentum and Scalars Above an Urban Canopy

Turbulent transport of momentum and scalars over an urban canopy is investigated using the quadrant analysis technique. High-frequency measurements are available at three levels above the urban canopy (47, 140 and 280 m). The characteristics of coherent ejection–sweep motions (flux contributions and time fractions) at the three levels are analyzed, particularly focusing on the difference between ejections and sweeps, the dissimilarity between momentum and scalars, and the dissimilarity between the different scalars (i.e., temperature, water vapour and $\hbox {CO}_{2})$ . It is found that ejections dominate momentum and scalar transfer at all three levels under unstable conditions, while sweeps are the dominant eddy motions for transporting momentum and scalars in the urban roughness sublayer under neutral and stable conditions. The flux contributions and time fractions of ejections and sweeps can be adequately captured by assuming a Gaussian joint probability density function for flow variables. However, the inequality of flux contributions from ejections and sweeps is more accurately reproduced by the third-order cumulant expansion method (CEM). The incomplete cumulant expansion method (ICEM) also works well except for $\hbox {CO}_{2}$ at 47 m where the skewness of $\hbox {CO}_{2}$ fluctuations is significantly larger than that for vertical velocity. The dissimilarity between momentum and scalar transfers is linked to the dissimilarity in the characteristics of ejection–sweep motions and is further quantified by measures of transport efficiencies. Atmospheric stability is the controlling factor for the transport efficiencies of momentum and heat, and fitted functions from the literature describe their behaviour fairly accurately. However, transport efficiencies of water vapour and $\hbox {CO}_{2}$ are less affected by the atmospheric stability. The dissimilarity among the three scalars examined in this study is linked to the active role of temperature and to the surface heterogeneity effect.     

Quantifying the Influence of Random Errors in Turbulence Measurements on Scalar Similarity in the Atmospheric Surface Layer

The influence of random errors in turbulence measurements on scalar similarity for temperature, water vapour, \(\hbox {CO}_{2}\), and \(\hbox {NH}_{3}\) is investigated using two eddy-covariance datasets collected over a lake and a cattle feedlot. Three measures of scalar similarity, namely, the similarity constant in the flux–variance relationship, the correlation coefficient between two scalars and the relative transport efficiency, are examined. The uncertainty in the similarity constant \(C_{s}\) in the flux–variance relationship resulting from random errors in turbulence measurements is quantified based on error propagation analyses and a Monte-Carlo sampling method, which yields a distribution instead of a single value for \(C_{s}\). For different scalars, the distributions of \(C_{s}\) are found to significantly overlap, implying that scalars are transported similarly under strongly unstable conditions. The random errors in the correlation coefficients between scalars and the relative transport efficiencies are also quantified through error propagation analyses, and they increase as the atmosphere departs from neutral conditions. Furthermore, the correlation coefficients between three scalars (water vapour, \(\hbox {CO}_{2}\), and \(\hbox {NH}_{3}\)) are statistically different from unity while the relative transport efficiencies are not, which highlights the difference between these two measures of scalar similarity. The results suggest that uncertainties in these measures of scalar similarity need to be quantified when using them to diagnose the existence of dissimilarity among different scalars.     

The Effect of Source Distribution on Bulk Scalar Transfer between a Rough Land Surface and the Atmosphere

We investigate the effect of source distribution on the bulk transfer of passive scalars between rough, vegetated land surfaces and the atmosphere, using data from a wind-tunnel experiment in which passive heat was emitted from both the underlying surface and canopy elements of a three-dimensional regular bluff-body array. The experimental results are compared with a simple one-dimensional, two-source model for scalar transfer. We find that: (1) the observed scalar transfer resistance across the boundary layer at the underlying surface is simply related to flat-plate theory by a constant of 0.62, despite the complexity of the turbulent flow within the wind-tunnel canopy; (2) one-dimensional gradient-transfer theory, even with extensions to account for the non-local nature of turbulent transfer within the canopy, does not describe the observed details of scalar concentration gradients in the highly three-dimensional canopy flow, but does provide a reasonable framework for bulk scalar transfer between the composite ground-canopy surface and the flow above the canopy; (3) the kB ⁻¹ parameter (which accounts for bulk excess resistance to scalar transfer over momentum transfer) is highly sensitive to scalar source partition between ground and canopy.     

Fetch and Footprint of Turbulent Fluxes over Vegetative Stands with Elevated Sources

In this study, Raupach's localized near-field (LNF)theory is combined with appropriate parameterizations ofthe turbulence inside a canopy to investigate how airstability and source configuration influence the fluxfootprint and flux adjustment with fetch in theroughness sublayer. The model equations are solvednumerically. The flux footprint from the LNF predictionis in general more contracted than the prediction basedon the inertial sublayer similarity functions. Invery unstable conditions, the near-field effect causes thefootprint of the elevated canopy source to locatefurther upwind than that of the ground-level source, andthe combined footprint can become negative in situationswhere the two sources are of opposite sign. The fluxfootprint and flux adjustment with fetch in theroughness sublayer are sensitive to source configurationand the parameters specifying wind speed and theLagrangian time scale inside the canopy.     

The air density correction to eddy flux measurements

Under the usual assumptions for the atmospheric surface layer, we show that air density fluctuations, particularly those due to temperature fluctuations associated with a heat flux, result in a small mean vertical wind velocity. Because of this, there can be a significant correction to eddy flux measurements of passive scalars, for example CO₂, whose average concentration is very large compared to concentration fluctuations associated with the eddy flux.