豫西太原组、山西组中潮道沉积的类型和特征

豫西太原组中的潮道为陆表海滨岸潮道类型,其特点为:向上变细的层序,冲刷切割下伏的灰岩层,具大型板状、槽状交错层理和双向交错层理,潮道曲流砂坝发育。山西组下段的潮道为障壁后潮道,位于障壁砂坝后的潮坪区;潮道砂岩泥质杂基较高,正粒序,砂体自海向陆分叉尖灭;潮坪、潮道等亚环境组合影响了其上发育的煤层的厚度变化。山西组上段的潮道为下三角洲平原潮道类型,多位于分流河口,砂岩为正粒序,双(单)粘土层和潮汐周期层序发育。     

Stacked fluvial and tide-dominated estuarine deposits in high-frequency (fourth-order) sequences of the Eocene Central Basin, Spitsbergen

Eighteen coastal-plain depositional sequences that can be correlated to shallow- to deep-water clinoforms in the Eocene Central Basin of Spitsbergen were studied in 1 × 15 km scale mountainside exposures. The overall mud-prone (>300 m thick) coastal-plain succession is divided by prominent fluvial erosion surfaces into vertically stacked depositional sequences, 7–44 m thick. The erosion surfaces are overlain by fluvial conglomerates and coarse-grained sandstones. The fluvial deposits show tidal influence at their seaward ends. The fluvial deposits pass upwards into macrotidal tide-dominated estuarine deposits, with coarse-grained river-dominated facies followed further seawards by high- and low-sinuosity tidal channels, upper-flow-regime tidal flats, and tidal sand bar facies associations. Laterally, marginal sandy to muddy tidal flat and marsh deposits occur. The fluvial/estuarine sequences are interpreted as having accumulated as a series of incised valley fills because: (i) the basal fluvial erosion surfaces, with at least 16 m of local erosional relief, are regional incisions; (ii) the basal fluvial deposits exhibit a significant basinward facies shift; (iii) the regional erosion surfaces can be correlated with rooted horizons in the interfluve areas; and (iv) the estuarine deposits onlap the valley walls in a landward direction. The coastal-plain deposits represent the topset to clinoforms that formed during progradational infilling of the Eocene Central Basin. Despite large-scale progradation, the sequences are volumetrically dominated by lowstand fluvial deposits and especially by transgressive estuarine deposits. The transgressive deposits are overlain by highstand units in only about 30% of the sequences. The depositional system remained an estuary even during highstand conditions, as evidenced by the continued bedload convergence in the inner-estuarine tidal channels.     

Evolution of depositional settings in the Torrey area during the Smithian (Early Triassic,Utah, USA) and their significance for the biotic recovery

This work focuses on well‐exposed Lower Triassic sedimentary rocks in the area of Torrey (south‐central Utah, USA). The studied Smithian 8 deposits record a large‐scale third‐order sea‐level cycle, which permits a detailed reconstruction of the evolution of depositional settings. During the middle Smithian, peritidal microbial limestones associated with a rather low‐diversity benthic fauna were deposited seaward of the tidal flat siliciclastic red beds. Associated with siliceous sponges, microbial limestones formed small m‐scale patch reefs. During the late middle to late Smithian interval, the sedimentary system is characterized by tidal flat dolostones of an interior platform, ooid‐bioclastic deposits of a tide‐dominated shoal complex, and mid‐shelf bioclastic limestones. Microbial deposits, corresponding to sparse stromatolites formed in the interior platform, are contemporaneous with a well‐diversified marine fauna living in a seaward shoal complex and mid‐shelf area. The nature and distribution of these Smithian microbial deposits are not related to any particular deleterious environmental condition, highlighting that observed patterns of biotic recovery after the end‐Permian mass extinction were directly influenced by depositional settings. Facies evolution and stratal stacking patterns allow us to identify large, medium and small‐scale, as well as elementary depositional sequences. Large‐ and medium‐scale sequences are consistent with sea‐level changes, whereas small‐scale and elementary sequences are better explained by autocyclic processes. Copyright © 2015 John Wiley & Sons, Ltd.     

Fluvial processes and facies sequences in the sandy braided South Saskatchewan River, Canada

The South Saskatchewan River has a long term average discharge of 275 m³/sec, with flood peaks in the range of 1500 to 3800 m³/sec. South of Saskatoon, the four major types of geomorphological elements recognised are channels, slipface-bounded bars, sand flats and vegetated islands and floodplains. Major channels are 3-5 m deep, up to 200 m wide, and flow around sand flats which are 50-2000 m long, and around vegetated islands up to 1 km long. At areas of flow expansion, long straight-crested cross-channel bars form. During falling stage, a small part of the crest of the cross-channel bar may become emergent, and act as a nucleus for downstream and lateral growth of a new sand flat. The dominant channel bedforms are dunes, which deposit trough cross bedding. Cross-channel bars deposit large sets of planar tabular cross bedding. Sand flats that grow from a nucleus on a cross-channel bar are mostly composed of smaller planar tabular sets, with some parallel lamination, trough cross-bedding, and ripple cross-lamination. A typical facies sequence related to sand flat growth would consist of in-channel trough cross-bedding, overlain by a large (1-2 m) planar tabular set (cross-channel bar), overlain in turn by a complex association mostly of small planar tabular cross-beds, trough cross-beds and ripple cross-lamination. By contrast, a second stratigraphic sequence can be proposed, related only to channel aggradation. It would consist dominantly of trough cross-beds, decreasing in scale upward, and possible interrupted by isolated sets of planar tabular cross-bedding if a cross-channel bar formed, but failed to grow into a sand flat. During final filling of the channel, ripple cross-lamination and thin clay layers may be deposited. In the S. Saskatchewan, these sequences are a minimum of 5 m thick, and are overlain by 0.5-1 m of silty and muddy vertical accretion deposits.     

豫西荥巩——新密煤田太原组、山西组的沉积环境和聚煤规律

荥巩和新密煤田是豫西北部的两个相邻煤田。主要含煤地层为晚古生代晚石炭世太原组和早二叠世山西组,总厚100—150m;下石盒子组及晚二叠世的上石盒子组在本区仅偶含薄煤层。太原组位于含煤岩系最底部,为碳酸盐岩和碎屑岩交替沉积,灰岩形成于清澈、温暖、浅水的陆表海潮下环境,碎屑岩则为潮道和潮间带为主的潮道、潮坪沉积。太原组含有6—7层薄煤层,形成于咸水或半咸水的泥炭沼泽中。山西组几乎全由碎屑岩组成,下部发育本区的主要可采煤层二1煤。二1煤以下层位为潮坪和横向与之共生的潮道、潮沟及河口潮汐砂脊沉积,二1煤以上为河流作用为主的三角洲沉积,三角洲由北向南进积到半咸水的海湾中。二1煤形成于海退时期,它们堆积在滨海平原的淡水泥炭沼泽中,其厚度变化及发育程度主要受成煤前沉积环境控制,但在本区西部构造较复杂处,煤层厚度受后期构造影响较大。沉积环境对煤层原生厚度的影响主要表现在潮坪和废弃的潮道、潮沟、河口潮汐砂背沉积物之上,煤层发育好,而在二1煤之下有活动的潮道及河口潮汐砂脊发育时,煤层较薄或不发育。     

Facies characteristics and architecture related to palaeodepth of Holocene fjord–delta sediments

Lithofacies characteristics and depositional geometry of a sandy, prograding delta deposited as part of the Holocene valley‐fill stratigraphy in the Målselv valley, northern Norway, were examined using morpho‐sedimentary mapping, facies analysis of sediments in exposed sections, auger drilling and ground penetrating radar survey. Various lithofacies types record a broad range of depositional processes within an overall coarsening‐upward succession comprising a lowermost prodelta/bottomset unit, an intermediate delta slope/foreset unit containing steeply dipping clinoforms and an uppermost delta plain/topset unit. Bottomset lithofacies typically comprise sand‐silt couplets (tidal rhythmites), bioturbated sands and silts, and flaser and lenticular bedding. These sediments were deposited from suspension fall‐out, partly controlled by tidal currents and fluvial effluent processes. Delta foreset lithofacies comprise massive, inverse graded and normal graded beds deposited by gravity‐driven processes (mainly cohesionless debris flows and turbidity currents) and suspension fall‐out. In places, delta foreset beds show tidal rhythmicity and individual beds can be followed downslope into bottomset beds. Delta plain facies show an upward‐fining succession with trough cross‐beds at the base, followed by planar, laminated and massive beds indicative of a bedload dominated river/distributary system. This study presents a model of deltaic development that can be described with reference to three styles within a continuum related primarily to water depth within a basin of variable geometry: (i) bypass; (ii) shoal‐water; and (iii) deep‐water deltas. Bypass and deep‐water deltas can be considered as end members, whereas shoal‐water deltas are an intermediate type. The bypass delta is characterized by rapid progradation and an absence of delta slope sediments and low basin floor aggradation due to low accommodation space. The shoal‐water delta is characterized by rapid progradation, a short delta slope dominated by gravity‐flow processes and a prodelta area characterized by rapid sea‐floor aggradation due to intense suspension fallout of sandy material. Using tidal rhythmites as time‐markers, a progradation rate of up to 11 m year^?1 has been recorded. The deep‐water delta is characterized by a relatively long delta slope dominated by gravity flows, moderate suspension fall‐out and slow sea‐floor aggradation in the prodelta area.     

Sedimentology and stratigraphy of a transgressive, muddy gravel beach: Waterside Beach, Bay of Fundy, Canada

Sediments exposed at low tide on the transgressive, hypertidal (>6 m tidal range) Waterside Beach, New Brunswick, Canada permit the scrutiny of sedimentary structures and textures that develop at water depths equivalent to the upper and lower shoreface. Waterside Beach sediments are grouped into eleven sedimentologically distinct deposits that represent three depositional environments: (1) sandy foreshore and shoreface; (2) tidal‐creek braid‐plain and delta; and, (3) wave‐formed gravel and sand bars, and associated deposits. The sandy foreshore and shoreface depositional environment encompasses the backshore; moderately dipping beachface; and a shallowly seaward‐dipping terrace of sandy middle and lower intertidal, and muddy sub‐tidal sediments. Intertidal sediments reworked and deposited by tidal creeks comprise the tidal‐creek braid plain and delta. Wave‐formed sand and gravel bars and associated deposits include: sediment sourced from low‐amplitude, unstable sand bars; gravel deposited from large (up to 5·5 m high, 800 m long), landward‐migrating gravel bars; and zones of mud deposition developed on the landward side of the gravel bars. The relationship between the gravel bars and mud deposits, and between mud‐laden sea water and beach gravels provides mechanisms for the deposition of mud beds, and muddy clast‐ and matrix‐supported conglomerates in ancient conglomeratic successions. Idealized sections are presented as analogues for ancient conglomerates deposited in transgressive systems. Where tidal creeks do not influence sedimentation on the beach, the preserved sequence consists of a gravel lag overlain by increasingly finer‐grained shoreface sediments. Conversely, where tidal creeks debouch onto the beach, erosion of the underlying salt marsh results in deposition of a thicker, more complex beach succession. The thickness of this package is controlled by tidal range, sedimentation rate, and rate of transgression. The tidal‐creek influenced succession comprises repeated sequences of: a thin mud bed overlain by muddy conglomerate, sandy conglomerate, a coarse lag, and capped by trough cross‐bedded sand and gravel.     

低能海岸的垂直层序和风暴沉积

我国淤泥质海岸由微型和小型层序构成。微型层序主要是潮汐作用形成的,小型层序由粗、细粒单层构成,其中粗粒单层形成于风暴时期,细粒单层形成于平静天气。小型层序系完整的风暴层序。在游泥质海岸层序中风暴沉积的厚度超过非风暴沉积,且排列有序。低潮坪沉积物粗,向陆向海变细,从而构成中间粗、两端细的淤泥质海岸典型垂直层序。随着条件和因素的变化,典型垂直层序可以产生若干变异,识别出三种变异层序。     

白坪井田太原组上段底部砂岩沉积环境分析及其意义

白坪井田太原组上段主要由三层灰岩（L7、L8、L9）、泥岩和薄煤层组成,L7灰岩位于该段底部,是一7煤层顶板。根据井田西部钻孔资料,相当于L7灰岩层位,往往相变为砂岩。该砂岩以中、粗粒砂岩为主,向上渐变为细砂岩,正粒序特征明显,具板状交错层理和波状层理,底部多为粗砂岩,见冲刷面,其厚度与L7灰岩厚度相当,剖面上砂体呈连续的透镜状,与两侧的L7灰岩呈突变接触关系,砂岩体平面上呈条带状分布,与地层走向垂直,综合分析认为该砂体属潮道沉积相,是在潮坪上潮汐通道部位形成的砂质沉积属潮道沉积相。对该砂体分布的圈定,意味着一7煤在此范围的缺失,这一结论有助于解决太原组煤岩层的对比问题。     

High resolution stratigraphy and facies differentiation of the shallow marine Annot Sandstones, south-east France

High resolution stratigraphical analysis divides a rock succession into the basic genetic units of stratigraphy which are here termed small scale stratigraphical cycles. Each cycle records the sedimentological response to an episode of shallowing and deepening. Assuming that these changes in water depth reflect changes in the shoreline position, they can be considered as regressive/transgressive episodes. Each cycle comprises a regressive and transgressive facies tract which will be variably proportioned; in some examples a facies tract may only be represented by a hiatal surface of no deposition, erosion and/or bypass. In the Annot Sandstones of south-east France, variations in facies types, proportions and associations can be demonstrated both laterally and vertically through the succession. First, it is demonstrated that facies variations occur within regressive or transgressive facies tracts as a function of the stratigraphical stacking pattern of the cycles (i.e. landward, vertical or seaward stacked); this is termed ‘vertical facies differentiation’. Second, the proportions of facies tracts and their constituent facies types within an individual cycle vary between more landward and more seaward palaeogeographical locations; this is termed ‘lateral facies differentiation'. The upper Eocene/lower Oligocene Annot sandstones outcrop in the Maritime Alps of south-east France, within the thin skinned outer fold and thrust belt of the Alpine arc. The sandstones are well exposed in the area of the Col de la Cayolle on the north-west margin of the Argentera Massif, where lithostratigraphical correlations are possible over 3·5 km in a NNW/SSE direction, perpendicular to the edge of the depositional basin. Traditionally, these outcrops have been interpreted as deep marine turbidite lobe sediments; this study reflects a significant reinterpretation of this succession as having been deposited in a shallow marine environment. Seven sedimentary sections were measured through the succession, which is divided into 10 small scale stratigraphical cycles. These cycles are described in terms of eight facies which are separated into their transgressive or regressive facies tracts. In eight of the 10 cycles, the regressive facies tracts reflect the progradation of storm influenced braid deltas over shelf muds and silts. In two of the 10 cycles, the regressive facies tracts reflect barrier inlet and wash-over sands interfingering with back barrier deposits. These latter two cycles are located within landward stepping cycle sets; this is an example of vertical facies differentiation. Transgressive facies tracts locally reworked the upper surface of the regressive facies tract and also comprise barrier and back barrier deposits. The facies succession within each cycle varies according to its position with respect to the palaeoshoreline. The more landward portion of an individual cycle comprises a deltaic shoaling upward succession, culminating in coarse distributary channel conglomerates, overlain by a transgressive barrier/inlet system with extensive back barrier deposits. Beyond the delta front, the more seaward equivalent of individual cycles comprises an erosive base, with aggradational massive pebbly sandstones sitting directly upon offshore heterolithics; these sandstones are interpreted as hyperconcentrated fluvial efflux into the nearshore environment. This grades upward into offshore heterolithics and graded storm deposits representing the products of ravinement, which are then overlain by shelf mudstones. In summary, the more landward portions of cycles preserve predominantly regressive facies tracts, whereas the more seaward portions preserve aggradational to retrogradational strata of the transgressive facies tract; this is an example of lateral facies differentiation.     

Terrestrial-marine transition in the Cambrian rocks of Kangaroo Island, South Australia

The upper part of the Lower Cambrian succession in northeast Kangaroo Island comprises three interbedded facies associations. The fine-grained association is composed of siltstone, mudstone and minor sandstone. It contains flat lamination and abundant ripple cross-lamination which shows bipolar palaeocurrents, and occurs in combinations of flaser bedding, lenticular bedding and wavy lamination. Although body fossils are relatively rare, trilobite traces and desiccation cracks are common, and the association is interpreted as a predominantly subtidal to intertidal deposit. The conglomerate facies association contains horizontally bedded cobble to boulder conglomerate, with subordinate trough cross-stratified coarse sandstone to granule/pebble conglomerate. Fabrics and structures in the coarse conglomerates are consistent with alluvial transport (stream and debris flow), but not beach deposition. The conglomerate association is attributed to tectonic uplift and erosion of a Precambrian-Lower Cambrian succession developed adjacent to the present north coast of Kangaroo Island. Southward progradation of an alluvial fan complex occurred across east-west oriented tidal flats on which limited wave activity reworked sand and fine gravel, but not coarser material. The sandstone facies association mainly comprises trough cross-stratified and plane-laminated sandstone, the latter with current lineation predominantly sub-parallel to the east-west shoreline. Trough cross-stratification is ascribed to onshore waves and longshore currents, and current lineation to predominantly shore-parallel tidal currents, augmented by longshore drift and storm surge. Tectonic movements gave rise to cycles of transgression and regression as tidal and alluvial processes dominated alternately.     

Stratigraphic architecture and depositional setting of the coarse‐grained Upper Cambrian Owen Conglomerate,West Coast Range,western Tasmania

The Upper Cambrian Owen Conglomerate of the West Coast Range, western Tasmania, comprises two upward‐fining successions of coarse‐grained siliciclastic rocks that exhibit a characteristic wedge‐shaped fill controlled by the basin‐margin fault system. Stratigraphy is defined by the informally named basal lower conglomerate member, middle sandstone member, middle conglomerate member and upper sandstone member. The lower conglomerate member has a gradational basal contact with underlying volcaniclastics of the Tyndall Group,while the upper sandstone member is largely conformable with overlying Gordon Group marine clastics and carbonates. The lower conglomerate member predominantly comprises high flow regime, coarse‐grained, alluvial‐slope channel successions, with prolonged channel bedload transport exhibited by the association of channel‐scour structures with upward‐fining packages of pebble, cobble and boulder conglomerate and sandstone, with abundant large‐scale cross‐beds derived from accretion in low‐sinuosity, multiply active braided‐channel complexes. While the dipslope of the basin is predominantly drained by west‐directed palaeoflow, intrabasinal faulting in the southern region of the basin led to stream capture and the subsequent development of axial through drainage patterns in the lower conglomerate member. The middle sandstone member is characterised by continued sandy alluvial slope deposition in the southern half of the basin, with pronounced west‐directed and local axial through drainage palaeoflow networks operating at the time. The middle sandstone member basin deepens considerably towards the north, where coarse‐grained alluvial‐slope deposits are replaced by coarse‐grained turbidites of thick submarine‐fan complexes. The middle conglomerate member comprises thickly bedded, coarse‐grained pebble and cobble conglomerate, deposited by a high flow regime fluvial system that focused deposition into a northern basin depocentre. An influx of volcanic detritus entered the middle conglomerate member basin via spatially restricted footwall‐derived fans on the western basin margin. Fluvial systems continued to operate during deposition of the upper sandstone member in the north of the basin, facilitated by multiply active, high flow regime channels, comprising thick, vertically stacked and upward‐fining, coarse‐grained conglomerate and sandstone deposits. The upper sandstone member in the south of the basin is characterised by extensive braid‐delta and fine‐grained nearshore deposits, with abundant bioturbation and pronounced bimodal palaeocurrent trends associated with tidal and nearshore reworking. An increase in base‐level in the Middle Ordovician culminated in marine transgression and subsequent deposition of Gordon Group clastics and carbonates.     

哈萨克斯坦Marsel探区下石炭统碳酸盐岩微相特征与沉积环境

根据薄片和岩心资料,识别出哈萨克斯坦Marsel探区下石炭统43种微相类型(MF)和10种微相组合样式(MA)。其中,MF1—MF3为灰泥灰岩,形成于外缓坡或局限低能环境;MF4—MF13为粒泥灰岩,形成于内缓坡泻湖—潮缘带、中缓坡或外缓坡环境;MF14—MF20为泥粒灰岩,形成于局限及低能的内缓坡环境;MF21—MF34为颗粒灰/云岩,多形成于内缓坡潮下带—中缓坡浅滩环境;MF35—MF37为晶粒白云岩,形成于蒸发潮坪环境;MF38—MF43为细粒碎屑岩,主要形成于内缓坡—中缓坡环境。微相组合样式主要包括中—外缓坡微相组合(MA2)、中—低能浅滩微相组合(MA1、MA8)、中缓坡混积微相组合(MA5)、中—高能浅滩—潮坪微相组合(MA6、MA7、MA9)、内缓坡泻湖—潮坪微相组合(MA3)、内缓坡碎屑潮坪微相组合(MA4)和混积潮坪微相组合(MA10)。通过亚相和微相组合分析,认为研究区早石炭世属于缓坡型台地沉积模式。杜内阶—维三段早期,相对海平面缓慢—快速上升,总体以内—中缓坡低能局限泻湖—潮坪和中—外缓坡沉积为主;维三段中期—谢尔普霍夫阶期,相对海平面缓慢—快速下降,主要发育内缓坡低能局限泻湖—潮坪和蒸发潮坪沉积,局部地区发育浅滩和混积潮坪沉积。     

Marine transgression and regression in Miocene sequences of northern Pegu (Bago) Yoma,Central Myanmar

Neogene strata of the northern part of the Pegu (Bago) Yoma Range, Central Myanmar, contain a series of shallow marine clastic sediments with stratigraphic ages ranging from the Early to Late Miocene. The studied succession (around 750 m thick) is composed of three major stratigraphic units deposited during a major regression and four major transgressive cycles in the Early to Late Miocene. The transgressive deposits consist of elongate sand-bars and broad sand-sheets that pass headward into mixed-flats of tidal environments. Marine flooding in transgressive deposits is associated with coquina beds and allochthonous coral-bearing sandy limestone bands. Major marine regressions are associated with lowstand progradation of thick estuary point-bars passing up into upper sand-flat sand bodies encased within the tidal flat sequences and lower shoreface deposits with local unconformities. The succession initially formed in a large scale incised-valley system, and was later interrupted by two major marine transgressions in the generally regressive or basinward-stepping stratigraphic sequences. Successive sandbodies were formed during a sea-level lowstand and early stage of the subsequent relative rise of sea level in a tide-dominated estuary system in the eastern part of the Central Myanmar Tertiary Basin during Early to Late Miocene times.     

湘西北龙山、永顺地区龙马溪组潮控三角洲沉积的发现--志留纪“雪峰隆起”形成的新证据

通过露头沉积学与岩石学分析,在湘西北龙山、永顺地区下志留统龙马溪组中首次发现完整的潮控型三角洲沉积,也是华南地区龙马溪组中存在三角洲相的首次报道。识别出前三角洲、三角洲前缘和三角洲平原3个亚相及10个微相。前三角洲亚相以滨外泥页岩为主,并发育低密度浊积岩,主要见于龙马溪组底部和下部;三角洲前缘亚相包括席状砂、分流间湾、河口砂坝和远砂坝等;三角洲平原亚相包括分流河道、分流间湾、天然堤和决口扇等,主要见于龙马溪组中部、上部。通过分析剖面垂向序列及其指示的沉积环境变化,提出本区龙马溪组三角洲相碎屑岩是构造挤压背景下“雪峰隆起”开始形成的重要沉积响应。该三角洲沉积的发现,对于理解扬子东南缘早志留世构造-古地理转型的时限与过程具有特殊意义。     

Fluvial to tidal transition in proximal,mixed tide‐influenced and wave‐influenced deltaic deposits: Cretaceous lower Sego Sandstone,Utah, USA

Facies models for regressive, tide‐influenced deltaic systems are under‐represented in the literature compared with their fluvial‐dominated and wave‐dominated counterparts. Here, a facies model is presented of the mixed, tide‐influenced and wave‐influenced deltaic strata of the Sego Sandstone, which was deposited in the Western Interior Seaway of North America during the Late Cretaceous. Previous work on the Sego Sandstone has focused on the medial to distal parts of the outcrop belt where tides and waves interact. This study focuses on the proximal outcrop belt, in which fluvial and tidal processes interact. Five facies associations are recognized. Bioturbated mudstones (Facies Association 1) were deposited in an offshore environment and are gradationally overlain by hummocky cross‐stratified sandstones (Facies Association 2) deposited in a wave‐dominated lower shoreface environment. These facies associations are erosionally overlain by tide‐dominated cross‐bedded sandstones (Facies Association 4) interbedded with ripple cross‐laminated heterolithic sandstones (Facies Association 3) and channelized mudstones (Facies Association 5). Palaeocurrent directions derived from cross‐bedding indicate bidirectional currents which are flood‐dominated in the lower part of the studied interval and become increasingly ebb‐directed/fluvial‐directed upward. At the top of the succession, ebb‐dominated/fluvial‐dominated, high relief, narrow channel forms are present, which are interpreted as distributary channels. When distributary channels are abandoned they effectively become estuaries with landward sediment transport and fining trends. These estuaries have sandstones of Facies Association 4 at their mouth and fine landward through heterolithic sandstones of Facies Association 3 to channelized mudstones of Facies Association 5. Therefore, the complex distribution of relatively mud‐rich and sand‐rich deposits in the tide‐dominated part of the lower Sego Sandstone is attributed to the avulsion history of active fluvial distributaries, in response to a subtly expressed allogenic change in sediment supply and relative sea‐level controls and autocyclic delta lobe abandonment.     

Lithofacies relations in the Late Quaternary Niger Delta complex

A study of cores from thirty-three coreholes drilled in various parts of the Niger delta has shown tidal channel sand to be the dominant lithofacies type in the uppermost 30 m of the deltaic complex. Below 30 m fluviatile sand becomes predominant. Coastal barrier sand is present in the uppermost 5 m of the present coastal belt, but chances for preservation of this lithofacies appear to be small. The Post-Glacial deltaic sediments can be divided into three units.

• 1 Alluvial valley-fill sands and conglomerates deposited during the strong Post-Glacial sea level rise.
• 2 An onlapping complex of lower coastal plain deposits which contains a lower member of fine grained lagoonal and mangrove swamp deposits and an upper member of tidal channel and coastal barrier sands. This complex is thought to have been deposited during the strong Post-Glacial rise in sea level and is locally as much as 25 m thick.
• 3 An offlapping complex of fluviomarine and coastal deposits which contains a lower member of marine clay and silt and an upper member of tidal channel and coastal barrier sand. The presence of this late Holocene complex indicates that deltaic progradation was resumed as soon as the rapid rise in sea level slowed down. The offlapping complex is locally as much as 35 m thick.

     

琼东南盆地崖南凹陷海湾扇三角洲体系沉积构成及演化模式

本文以琼东南盆地崖南凹陷陵水组三段扇三角洲体系为例，详细讨论了进积于海湾背景环境下扇三角洲体系的岩性相、成因相及其空间配置关系。研究区海湾扇三角洲体系自下而上潮汐作用越来越强，其垂向演化可划分为三个阶段，早期为以河流作用占优势阶段，中期为河流和潮汐混合作用阶段，晚期为以潮汐作用占优势逐渐过渡为以潮汐作用占优势。     

Morphodynamic evolution and stratal architecture of translating tidal point bars: Inferences from the northern Venice Lagoon (Italy)

The widespread distribution of tidal creeks and channels that undertake meandering behaviour in modern coasts contrasts with their limited documentation in the fossil record, where point‐bar elements arising from the interaction between a mix of both fluvial and tidal currents are mainly documented. The sedimentary products of tidal channel‐bend evolution are relatively poorly known, and few studies have focused previously on specific facies models for tidal point bars present in modern settings. This study improves understanding of tidal channel meander bends through a multi‐disciplinary approach that combines analyses of historical aerial photographs, measurements of in‐channel flow velocity, high‐resolution facies analyses of sedimentary cores and three‐dimensional architectural modelling. The studied channel bend (12 to 15 m wide and 2 to 3 m deep) drains a salt marsh area located in the north‐eastern sector of the microtidal Venice Lagoon, Italy. Historical photographs show that, during the past 77 years, the bend has translated seaward ca 15 m. Results show that the channel bend formed on a non‐vegetated mud flat that was progressively colonized by vegetation. Seaward translation occurred under aggradational conditions, with an overall migration rate of 0·2 to 0·3 m year⁻¹, and was promoted by the occurrence of cohesive, poorly erodible outer bank deposits. Ebb currents are dominant, and translation of the channel bend promotes erosion and deposition along the landward and seaward side of the bar, respectively. Tidal currents show a clear asymmetry in terms of velocity distribution, and their offset pattern provides a peculiar grain‐size distribution within the bar. During the flood stage, sand sedimentation occurs in the upper part of the bar, where the maximum flow velocity occurs. During the ebb stage, the bar experiences the secondary helical flow that accumulates sand at the toe of the bar. Lateral stacking of flood and ebb deposits has caused the formation of localized coarsening‐upward and fining‐upward sedimentary packages, respectively.