T形配钢钢骨混凝土柱抗震性能数值分析

为研究非对称配钢钢骨混凝土柱的抗震性能,基于12根T形配钢钢骨混凝土柱的拟静力试验研究进行非线性数值模拟,了解其破坏机制、承载力、延性及耗能能力,探讨轴压比、配钢率、剪跨比对抗震性能的影响。结果表明,低周反复荷载作用下T形配钢钢骨混凝土柱滞回曲线饱满,具有良好的延性和耗能能力。在峰值荷载前,数值模拟结果与试验结果吻合较好。轴压力在一定范围内提高了试件承载力,但降低了延性;增大配钢率能提高试件的承载力、刚度和延性,使得峰值荷载后试件的性能退化趋于平缓;剪跨比对试件破坏形态有显著影响,随剪跨比的增大试件延性性能提高。     

局部锈蚀矩形RC墩重度震损后加固试验研究

为探究局部锈蚀矩形截面钢筋混凝土（RC）桥墩重度震损加固后的抗震性能,本文对拟静力破坏后的6个矩形截面RC桥墩试件进行扩大截面加固。通过加载试验,对加固桥墩试件从破坏形态、滞回特性、水平承载力、位移延性、侧向刚度以及耗能等方面进行了系统分析。结果表明:相比于普通箍筋,横向施加预应力的改进扩大截面加固方式对破坏后桥墩试件的抗震性能修复成效更佳;在同等位移幅值下,锈蚀率不断增大,桥墩试件抗震性能呈现逐渐降低的趋势;钢筋锈蚀位置上移,加固后桥墩试件的抗震性能提升;轴压比加大,加固后桥墩试件承载力和侧向刚度增大,但延性降低。     

薄壁型钢管/胶合竹板复合柱抗震性能试验

对9根带约束拉杆的方形薄壁型钢管/胶合竹板复合空芯柱(SBCCB)试件进行低周反复拟静力测试,考察SBCCB的破坏过程和形态,分析试件的长细比、胶合竹净横截面面积、截面组合方式对其受力和抗震性能影响。结果表明:SBCCB破坏形态主要为柱脚胶合面的开裂破坏和胶合竹板断裂破坏,截面组合方式对其破坏模式有显著影响。SBCCB试件有较好的弹性变形能力和抗震耗能性能,增大复合柱截面尺寸和长细比能改善抗震性能;约束拉杆有效保证了试件的整体性,抑制基体开胶破坏,间接提高了抗震性能。     

Research on seismic behavior and shear strength of SRHC frame columns

The seismic behavior of steel reinforced high strength and high performance concrete(SRHC)frame columns was investigated through pseudo-static experiments of 16 frame columns with various shear span ratios,axial compression ratios,concrete strengths,steel ratios and stirrup ratios.Three kinds of failure mechanisms are presented and the characteristics of experimental hysteretic curves and skeleton curves with different design parameters are discussed.The columns’ductility and energy dissipation were quantitatively evaluated based on seismic resistance.The research results indicate that SRHC frame columns can withstand extreme bearing capacity,but the abilities of ductility and energy dissipation are inferior because of SRHC’s natural brittleness.As a result,the axial load ratio should be restricted and some construction measures adopted,such as increasing the stirrup ratio.This research established effect factors on the bearing capacity of SPHC columns.Finally,an algorithm for obtaining ultimate bearing capacity using the flexural failure mode is established based on a modified planesection assumption.The authors also established equations to determine shearing baroclinic failure and shear bond failure based on the accumulation of the axial load force distribution ratio.The calculated results of shear bearing capacity for different failure modes were in good agreement with the experimental results.     

钢纤维增强十字形异形柱中节点的抗震性能试验

针对异形柱节点的薄弱特性,通过在节点处掺加钢纤维,对比了钢纤维增强的异形柱中节点和未掺加钢纤维的普通混凝土异形柱中节点的破坏特征、承载力、延性、滞回性能和刚度退化等抗震性能指标。结果表明:钢纤维增强的异形柱节点试件承载力明显提高,节点核心区破坏程度明显较轻,加载后期,刚度保持效果有明显改善,说明钢纤维可以提高异形柱节点的抗震能力。     

双向单排配筋混凝土低矮剪力墙抗震性能试验研究

双向单排配筋混凝土低矮剪力墙适用于多层住宅结构。对4个原型的剪跨比为1.0配筋混凝土低矮剪力墙进行了低周反复荷载试验研究,包括1个双向双排配筋混凝土低矮剪力墙和3个双向单排配筋混凝土低矮剪力墙。其中1个双向单排配筋混凝土低矮剪力墙加设暗支撑,用以研究暗支撑对这种新型墙体的作用。在试验研究的基础上,对比分析了各剪力墙的刚度及其衰减过程、承载力、延性、滞回特征、耗能能力及破坏特征。试验表明,经过合理设计,这种双向单排配筋混凝土低矮剪力墙可以满足多层住宅结构抗震要求。     

部分预制型钢混凝土梁抗震性能试验研究

为探究部分预制型钢混凝土梁的抗震性能,进行了7个部分预制型钢混凝土梁试件的拟静力试验,研究了试件的裂缝开展过程、破坏形态、承载能力、延性、耗能能力和刚度退化情况,探究预制截面模式、剪跨比和后浇混凝土强度等对其抗震能力的影响。结果表明:地震作用下,该7个试件力学性能较好,剪跨比是影响试件抗震性能的首要要素,剪跨比大的试件耗能能力强,型钢约束部分混凝土可以提高试件的耗能能力,截面模式和后浇混凝土强度对抗震性能影响不大。     

Experimental research on the seismic behavior of CSPSWs connected to frame beams

The seismic performance of composite steel plate shear walls (CSPSWs) that consist of a steel plate shear wall (SPSW) with reinforced concrete (RC) panels attached to one or both sides by means of bolts or connectors is experimentally studied. The shear wall is connected to the frame beams but not to the columns. This arrangement restrains the possible out-of-plane buckling of the thin-walled steel plate, thus significantly increasing the bearing capacity and ductility of the overall wall, and prevents the premature overall or local buckling failure of the frame columns. From a practical viewpoint, these solutions can provide open space in a floor as this type of composite shear walls with a relatively small aspect ratio can be placed parallel along a bay. In this study, four CSPSWs and one SPSW were tested and the results showed that both CSPSWs and SPSW possessed good ductility. For SPSW alone, the buckling appeared and resulted in a decrease of bearing capacity and energy dissipation capacity. In addition, welding stiffeners at corners were shown to be an effective way to increase the energy dissipation capacity of CSPSWs.     

三层单排配筋剪力墙结构抗震性能试验研究

为了对双排配筋剪力墙和单排配筋剪力墙的抗震性能进行对比研究,本文设计了1个1／3缩尺的三层混凝土剪力墙结构模型,模型的一侧墙体为双向双排配筋,另一侧墙体为双向单排配筋。对其进行了低周反复荷载下的抗震性能试验研究,分析了其承载力、延性、刚度及其退化过程、滞回特性、耗能能力和破坏特征。研究表明：在墙体的配筋率相同情况下,由于单排配筋墙体钢筋的间距相对于双排配筋墙体钢筋间距小,其首先约束混凝土裂缝的几率更大,其平面内的抗震性能优于双排配筋剪力墙;由于剪力墙的翼缘和腹板共同工作,单排配筋剪力墙平面外的性能也可满足多层剪力墙结构设计的要求。     

Experimental study of hollow rectangular bridge column performance under vertical and cyclically bilateral loads

To investigate the seismic performance of hollow reinforced concrete(RC) bridge columns of rectangular cross section under constant axial load and cyclically biaxial bending,five specimens were tested.A parametric study is carried out for different axial load ratios,longitudinal reinforcement ratios and lateral reinforcement ratios.The experimental results showed that all tested specimens failed in the flexural failure mode and their ultimate performance was dominated by flexural capacity,which is represented by the rupture/buckling of tensile longitudinal rebars at the bottom of the bridge columns.Biaxial force and displacement hysteresis loops showed significant stiffness and strength degradations,and the pinching effect and coupling interaction effect of both directions severely decrease the structural seismic resistance.However,the measured ductility coefficient varying from 3.5 to 5.7 and the equivalent viscous damping ratio varying from 0.19 and 0.26 can meet the requirements of the seismic design.The hollow RC rectangular bridge columns with configurations of lateral reinforcement in this study have excellent performance under bidirectional earthquake excitations,and may be considered as a substitute for current hollow RC rectangular section configurations described in the Guideline for Seismic Design of Highway Bridges(JTG/T B02-01-2008).The length of the plastic hinge region was found to approach one sixth of the hollow RC rectangular bridge column height for all specimen columns,and it was much less than those specified in the current JTG/T.Thus,the length of the plastic hinge region is more concentrated for RC rectangular hollow bridge columns.     

Experimental study on seismic behavior of circular RC columns strengthened with pre-stressed FRP strips

Bonding fiber reinforced polymer （FRP） has been commonly used to improve the seismic behavior of circular reinforced concrete （RC） columns in engineering practice. However, FRP jackets have a significant stress hysteresis effect in this strengthening method, and pre-tensioning the FRP can overcome this problem. This paper presents test results of 25 circular RC columns strengthened with pre-stressed FRP strips under low cyclic loading. The pre-stressing of the FRP strips, types of FRP strips and longitudinal reinforcement, axial load ratio, pre-damage degree and surface treatments of the specimens are considered as the primary factors in the tests. According to the failure modes and hysteresis curves of the specimens, these factors are analyzed to investigate their effect on bearing capacity, ductility, hysteretic behavior, energy dissipation capacity and other important seismic behaviors. The results show that the initial lateral confined stress provided by pre-stressed FRP strips can effectively inhibit the emergence and development of diagonal shear cracks, and change the failure modes of specimens from brittle shear failure to bending or bending-shear failure with better ductility. As a result, the bearing capacity, ductility, energy dissipation capacity and deformation capacity of the strengthened specimens are all significantly improved.     

高强钢筋混凝土短肢剪力墙抗震性能试验研究

通过对采用高强钢筋的6片T形混凝土短肢剪力墙和采用高强钢筋高强混凝土的6片L形短肢剪力墙进行低周往复加载试验,研究了T形和L形的破坏形态与性能差异,分析了高厚比、轴压比、配箍间距等参数对构件破坏形态、滞回耗能、骨架曲线、延性及耗能等抗震性能的影响,对比分析了构件与普通短肢剪力墙的抗震性能差异。试验结果表明:采用腹板端部箍筋加密的方式可减轻构件端部的损伤和降低正负向加载时承载力和延性的不对称性;T形构件中高厚比为5的试件表现为弯曲破坏,其他构件表现为弯剪破坏;试验中高厚比小的构件相对于高厚比大的试件延性耗能更好,轴压比增大,构件承载力提高但延性降低;与普通短肢剪力墙相比,T形短肢剪力墙承载力和变形能力提高,耗能增加,L形短肢剪力墙承载力提高较大,极限位移增大,构件后期变形能力略有降低,但可以满足抗震性能要求。     

Experimental investigation of damage behavior of RC frame members including non-seismically designed columns

Reinforced concrete (RC) frame structures are one of the mostly common used structural systems, and their seismic performance is largely determined by the performance of columns and beams. This paper describes horizontal cyclic loading tests often column and three beam specimens, some of which were designed according to the current seismic design code and others were designed according to the early non-seismic Chinese design code, aiming at reporting the behavior of the damaged or collapsed RC frame strctures observed during the Wenchuan earthquake. The effects of axial load ratio,shear span ratio, and transverse and longitudinal reinforcement ratio on hysteresis behavior, ductility and damage progress were incorporated in the experimental study. Test results indicate that the non-seismically designed columns show premature shear failure, and yield larger maximum residual crack widths and more concrete spalling than the seismically designed columns. In addition, longitudinal steel reinforcement rebars were severely buckled. The axial load ratio and shear span ratio proved to be the most important factors affecting the ductility, crack opening width and closing ability, while the longitudinal reinforcement ratio had only a minor effect on column ductility, but exhibited more influence on beam ductility. Finally, the transverse reinforcement ratio did not influence the maximum residual crack width and closing ability of the seismically designed columns.     

钢桁架(ST)约束混凝土组合柱抗震性能研究

目前,组合柱在建筑结构中进行了广泛应用和研究,研究表明:截面形式对组合柱的抗震性能有很大影响。首先,对钢桁架(ST)约束混凝土组合柱进行了试验研究。并在此基础上,利用有限元软件ABAQUS建立了数值分析模型;其次,基于数值分析模型,分析了组合柱中各部件的应力应变状态,分别考察了轴压比、缀板排列方式、体积配箍率、角钢肢宽与肢厚等因素对柱抗震性能的影响;最后,给出了组合柱在不同抗震等级下轴压比限值的建议值,可为后续组合柱的研究提供参考。研究表明:随着轴压比的增大,组合柱的延性变差,承载力先增大后减小;合理的缀板排列方式可有效抑制角钢的局部屈曲;随着体积配箍率的增大,组合柱的承载力有一定提升,延性提高较为显著;随着角钢肢宽和肢厚的增加,组合柱的承载力和延性均有显著提升。     

型钢连接装配式低矮剪力墙抗震性能试验研究

采用带锚筋的锚板、腹板、端板以及加劲板作为连接件,能够通过干式连接方法将上下预制剪力墙构件连为整体。为研究该新型全装配式剪力墙的受力性能和抗震性能,设计了2个剪跨比为0.783的试件和1个相同剪跨比及配筋率的现浇整体墙体,并进行了低周往复拟静力试验,分析了该全装配式剪力墙的承载能力、刚度、延性性能和耗能能力等。研究结果表明:现浇整体墙体和全装配式剪力墙的破坏形式均为受剪破坏,全装配式剪力墙的极限位移角大于现浇整体墙体极限位移角,分别为1/77和1/133,轴压比为0.3时平均延性系数3.47,低于现浇整体墙体平均延性系数4.62;但该全装配式剪力墙具有较高的承载能力和耗能能力。型钢与剪力墙的锚筋需采用穿孔塞焊的形式连接,避免锚筋与锚板焊接的位置发生剪断的现象。     

双向单排配筋剪力墙节点抗震性能试验研究

双向单排配筋剪力墙结构适用于多层住宅结构。为了研究不同构造及不同连梁剪跨比的节点抗震性能,进行了5个连梁与墙肢节点的低周反复荷载试验。较系统地分析了其承载力、刚度及其退化过程、延性、耗能、破坏机制和破坏特征等。试验表明,经过合理设计,这种双向单排配筋剪力墙节点可以满足抗震要求。     

Seismic steel jacketing of rectangular RC bridge columns for the mitigation of lap‐splice failures

This paper investigated the use of external steel jacketing for seismic retrofit of non‐ductile reinforced concrete (RC) bridge columns to prevent lap‐splice failure. Three 1/2.5‐scale specimens were tested under cyclic loads. The effectiveness of two types of steel jackets for improving the ductility and strength of specimens using inadequate transverse reinforcing and lap‐splice details were examined. An octagonal steel jacketing scheme for the seismic retrofitting of rectangular RC bridge columns was proposed. In addition, the methods for seismic retrofitting rectangular columns using elliptical steel jacketing were also critically tested. The test results indicated that the octagonal steel jackets can effectively provide confinement thereby mitigating failures as a result of inadequate transverse reinforcing and inadequate lap‐splices. Tests also confirmed that the ductility performance and the energy dissipation capacity of the specimens can be significantly improved by the octagonal steel jacket. Copyright © 2010 John Wiley & Sons, Ltd.     

不同轴压比下内藏钢桁架混凝土组合剪力墙抗震研究

轴压比是影响剪力墙抗震性能的一个主要因素,直接决定其延性性能。本文对两组共六个高剪力墙1/3缩尺的试件模型进行了不同轴压比下的低周反复荷载试验,研究了轴压比对内藏钢桁架混凝土组合剪力墙抗震性能的影响,对比了各试件的承载力、刚度及其退化过程、延性、滞回特性及破坏特征。试验表明:随着轴压比的提高其试件的承载力提高但延性下降;不同轴压比下内藏钢桁架混凝土组合剪力墙均能明显提高钢筋混凝土剪力墙的抗震性能。     

大跨度钢管混凝土拱桥抗震性能指标研究

高轴压比钢管混凝土墩柱的试验结果对钢管混凝土拱肋具有较大的借鉴意义。为明确大跨度钢管混凝土拱桥的抗震性能指标,研究了高轴比钢管混凝土构件的破坏过程及延性性能。以弯矩作为性能指标将高轴压比钢管混凝土构件的试验破坏过程分为轻微损伤、有限损伤与严重损伤3个阶段,结合钢管混凝土截面性能状态的数值分析,探讨了高轴压比钢管混凝土构件的破坏机理。结果表明:高轴压比钢管混凝土构件具有一定的可用延性;提出了以计算等效屈服弯矩作为抗震性能指标,适当利用延性和实现钢管混凝土拱桥的有限损伤抗震设计,并给出了与有限损伤相关的截面性能状态及参数。研究成果弥补了规范在此方面的不足,可供高烈度地震区大跨度钢管混凝土拱桥抗震设计时参考。     

Seismic performance of steel reinforced ultra high-strength concrete composite frame joints

To investigate the seismic performance of a composite frame comprised of steel reinforced ultra high-strength concrete (SRUHSC) columns and steel reinforced concrete (SRC) beams, six interior frame joint specimens were designed and tested under low cyclically lateral load. The effects of the axial load ratio and volumetric stirrup ratio were studied on the characteristics of the frame joint performance including crack pattern, failure mode, ductility, energy dissipation capacity, strength degradation and rigidity degradation. It was found that all joint specimens behaved in a ductile manner with flexural-shear failure in the joint core region while plastic hinges appeared at the beam ends. The ductility and energy absorption capacity of joints increased as the axial load ratio decreased and the volumetric stirrup ratio increased. The displacement ductility coefficient and equivalent damping coefficient of the joints fell between the corresponding coefficients of the steel reinforced concrete (SRC) frame joint and RC frame joint. The axial load ratio and volumetric stirrup ratio have less influence on the strength degradation and more influence on the stiffness degradation. The stiffness of the joint degrades more significantly for a low volumetric stirrup ratio and high axial load ratio. The characteristics obtained from the SRUHSC composite frame joint specimens with better seismic performance may be a useful reference in future engineering applications.