Intra‐event scale bar–bank interactions and their role in channel widening

Channel bars and banks strongly affect the morphology of both braided and meandering rivers. Accordingly, bar formation and bank erosion processes have been greatly explored. There is, however, a lack of investigations addressing the interactions between bed and bank morphodynamics, especially over short timescales. One major implication of this gap is that the processes leading to the repeated accretion of mid‐channel bars and associated widenings remain unsolved. In a restored section of the Drau River, a gravel‐bed river in Austria, mid‐channel bars have developed in a widening channel. During mean flow conditions, the bars divert the flow towards the banks. One channel section exhibited both an actively retreating bank and an expanding mid‐channel bar, and was selected to investigate the morphodynamic processes involved in bar accretion and channel widening at the intra‐event timescale. We repeatedly surveyed riverbed and riverbank topography, monitored riverbank hydrology and mounted a time‐lapse camera for continuous observation of riverbank erosion processes during four flow events. The mid‐channel bar was shown to accrete when it was submerged during flood events, which at the subsequent flow diversion during lower discharges narrowed the branch along the bank and increased the water surface elevation upstream from the riffle, which constituted the inlet into the branch. These changes of bed topography accelerated the flow along the bank and triggered bank failures up to 20 days after the flood events. Four analysed flow events exhibited a total bar expansion from initially 126 m² to 295 m², while bank retreat was 6 m at the apex of the branch. The results revealed the forcing role of bar accretion in channel widening and highlighted the importance of intra‐event scale bed morphodynamics for bank erosion, which were summarized in a conceptual model of the observed bar–bank interactions. Copyright © 2015 John Wiley & Sons, Ltd.     

Modeling planform evolution of a mud‐dominated meandering river: Quinn River,Nevada, USA

A depth‐averaged linearized meander evolution model was calibrated and tested using the field data collected at the Quinn River in the Black Rock Desert, Nevada. Two approaches used to test the model were: (1) simulating meander evolution and comparing the results with the observed 38 year migration pattern; and (2) fitting the model parameters to present bank asymmetry (the ratio of the maximum bank gradients on opposite sides of the channel). The data required as input were collected in the field during a high flow in May 2011 and from aerial photographs and LiDAR data. Both approaches yielded similar results for the best fit parameter values. The bank asymmetry analysis showed that the bank asymmetry and the velocity perturbation have high correlation at close to zero spatial lag while the maximum correlation between the bank asymmetry and maximum bend curvature is offset by about 25 m. The model sufficiently replicated 38 years of channel migration, with a few locations significantly under‐ or over‐predicted. Inadequacies of the flow model and/or variation in bank properties unaccounted for are most likely the causes for these discrepancies. Flow through the Quinn River was also simulated by a more general 3D model. The downstream pattern of near‐bank shear stresses simulated by the 3D model is nearly identical to those resulting from the linearized flow model. Topographic profiles across interior bends are essentially invariant over a wide range of migration rates, suggesting that the traditional formulation that cut bank erosion processes govern migration rates is appropriate for the Quinn River. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of critical shear stress of non‐cohesive soils using submerged jet test and turbulent kinetic energy

Laboratory tests using Jet Erosion Testing (JET) apparatus, impinging normally on a horizontal boundary, were conducted to determine the critical shear stress (τ_c) of non‐cohesive soil samples. A three‐dimensional (3D) SonTek/YSI 16 MHz Micro‐Acoustic Doppler Velocimeter (MicroADV) was used to measure turbulent kinetic energy (TKE) at a radial limit of entrainment in the wall jet zone and the measurements were used to calculate τ_c of the samples. The results showed that TKE increases exponentially with increasing particle size. The τ_c from this study were comparable (R² = 0.8) to the theoretical τ_c from Shields diagram after bed roughness scale ratio (D/k_s), due to the non‐uniform bed conditions, was accounted for. This study demonstrated that JET and TKE can be used to determine τ_c of non‐cohesive soils. The use of JET and TKE was found to be faster and easier when compared to the conventional approach of using flumes. A relationship of TKE at the onset of incipient motion (TKE_c) and samples’ D₅₀ developed in this study can be used to predict τ_c of non‐cohesive soils under similar non‐uniform conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of wet meadow riparian vegetation on streambank erosion. 2. Measurements of vegetated bank strength and consequences for failure mechanics

We measured the effect of wet meadow vegetation on the bank strength and failure mechanics of a meandering montane meadow stream, the South Fork of the Kern River at Monache Meadow, in California's Sierra Nevada. Streambanks colonized by ‘wet’ graminoid meadow vegetation were on average five times stronger than those colonized by ‘dry’ xeric meadow and scrub vegetation. Our measurements show that strength is correlated with vegetation density indicators, including stem counts, standing biomass per unit area, and the ratio of root mass to soil mass. Rushes appear better than sedges at stabilizing coarse bar surfaces, while sedges are far more effective at stabilizing actively eroding cut banks. Wet meadow floodplain vegetation creates a composite cut bank configuration (a cohesive layer overlying cohesionless materials) that erodes via cantilever failure. Field measurements and a geotechnical model of cantilever stability show that by increasing bank strength, wet meadow vegetation increases the thickness, width, and cohesiveness of a bank cantilever, which, in turn, increases the amount of time required to undermine, detach, and remove bank failure blocks. At Monache Meadow, it takes approximately four years to produce and remove a 1 m wide wet meadow bank block. Wet meadow vegetation limits bank migration rates by increasing bank strength, altering bank failure modes, and reducing bank failure frequency. Copyright © 2002 John Wiley & Sons, Ltd.     

Forest fire,bank strength and channel instability: the ‘unusual’ response of Fishtrap Creek,British Columbia

In August 2003, the McLure forest fire burned 62% of the drainage basin of Fishtrap Creek. Streamflow has been measured there since the early 1970s, and suspended sediment concentration and channel morphology have been monitored since the fire. Although the short post‐fire period (four years) limits our ability to draw firm conclusions about streamflow changes, there has been no obvious increase in peak flows since the fire. However, the total runoff during the freshet period does appear to have increased and the onset of snowmelt appears to occur about two weeks earlier than it did prior to the fire. Suspended sediment records from Fishtrap Creek and from an unburnt reference stream nearby are similar, suggesting that the burnt areas have remained relatively stable and that the sediment supply to Fishtrap Creek has not been dramatically altered. In contrast, the stream channel morphology has changed, widening by over 100% of the original width in some places and transforming from a laterally stable plane‐bed morphology to a laterally active riffle‐pool morphology. The timing and magnitude of the observed morphologic changes are consistent with the predicted decline in bank strength due to root decay, implying that the observed changes are associated with an internal instability associated with changes to the stream boundaries, rather than with the more typically reported externally driven instabilities caused by changes in streamflow or sediment supply. This delayed response in the absence of large changes in streamflow or sediment supply, while ‘unusual’ in that it has not been documented in the previous literature, may be a common mode of response, particularly in wat'ersheds with nival flow regimes. Copyright © 2010 John Wiley & Sons, Ltd.     

Interaction between meander dynamics and floodplain heterogeneity in a large tropical sand‐bed river: the Rio Beni,Bolivian Amazon

The evolution of meandering river floodplains is predominantly controlled by the interplay between overbank sedimentation and channel migration. The resulting spatial heterogeneity in floodplain deposits leads to variability in bank erodibility, which in turn influences channel migration and planform development. Despite the potential significance of these feedbacks, few studies have quantified their impact upon channel evolution and floodplain construction in dynamic settings (e.g. locations characterized by rapid channel migration and high rates of overbank sedimentation). This study employs a combination of field observations, geographic information system (GIS) analysis of satellite imagery and numerical modelling to investigate these issues along a 375 km reach of the Rio Beni in the Bolivian Amazon. Results demonstrate that the occurrence of clay‐rich floodplain deposits promotes a significant reduction in channel migration rates and distinctive styles of channel evolution, including channel straightening and immobilization of bend apices leading to channel narrowing. Clay bodies act as stable locations limiting the propagation of planform disturbances in both upstream and downstream directions, and operate as ‘hinge’ points, around which the channel migrates. Spatial variations in the erodibility of clay‐rich floodplain material also promote large‐scale (10–50 km) differences in channel sinuosity and migration, although these variables are also likely to be influenced by channel gradient and tectonic effects that are difficult to quantify. Numerical model results suggest that spatial heterogeneity in bank erodibility, driven by variable bank composition, may force a substantial (c. 30%) reduction in average channel sinuosity, compared to situations in which bank strength is spatially homogeneous. Copyright © 2015 John Wiley & Sons, Ltd.     

Assessing the effect of vegetation‐related bank strength on channel morphology and stability in gravel‐bed streams using numerical models

Bank strength due to vegetation dominates the geometry of small stream channels, but has virtually no effect on the geometry of larger ones. The dependence of bank strength on channel scale affects the form of downstream hydraulic geometry relations and the meandering‐braiding threshold. It is also associated with a lateral migration threshold discharge, below which channels do not migrate appreciably across their floodplains. A rational regime model is used to explore these scale effects: it parameterizes vegetation‐related bank strength using a dimensionless effective cohesion, C_r*. The scale effects are explored primarily using an alluvial state space defined by the dimensionless formative discharge, Q*, and channel slope, S, which is analogous to the Q–S diagrams originally used to explore meandering‐braiding thresholds. The analyses show that the effect of vegetation on both downstream hydraulic geometry and the meandering‐braiding threshold is strongest for the smallest streams in a watershed, but that the effect disappears for Q* > 10⁶. The analysis of the migration threshold suggests that the critical discharge ranges from about 5 m³/s to 50 m³/s, depending on the characteristic rooting depth for the vegetation. The analysis also suggests that, where fires frequently affect riparian forests, channels may alternate between laterally stable gravel plane‐bed channels and laterally active riffle‐pool channels. These channels likely do not exhibit the classic dynamic equilibrium associated with alluvial streams, but instead exhibit a cyclical morphologic evolution, oscillating between laterally stable and laterally unstable end‐members with a frequency determined by the forest fire recurrence interval. Copyright © 2008 John Wiley & Sons, Ltd.     

Morphodynamics of alternate bars in the presence of riparian vegetation

Alpine gravel-bed rivers are dynamic systems that have been subjected to many anthropic alterations in the past centuries. Riparian vegetation development on previously bare sediment bedforms has been a common adjustment, raising important management issues in terms of flood risks and biodiversity. Many of these rivers are also channelized, and as a result present a pattern of alternate bars. Considering recent advances in numerical biomorphodynamic modeling, this study aims at exploring numerically the morphodynamics of alternate bars in the presence of riparian vegetation. To this end, a dynamic vegetation module has been implemented on top of an existing morphodynamic model, accounting for ecological processes of seed dispersal, seedling recruitment, growth, and mortality. Numerical simulations have been performed on a simplified reach of a gravel-bed river with free migrating alternate bars at initial state. In this work 96 scenarios have been simulated, each representing 50 years of channel evolution, with different flood regimes characterized by various peak discharges and flood durations. Yearly peak discharge variability is explicitly modeled in 48 scenarios. Model outcomes present two possible equilibrium biomorphodynamic behaviors: stationary vegetated bars, or free migrating bars in the case of frequent vegetation removal during floods. This binary behavior holds true when the stochasticity of annual peak discharges is represented, and for a wide range of parameter values included in vegetation dynamic modeling. Transient mobility of vegetated bars is observed in specific configurations where large sediment deposits deflect the flow field, eroding bar heads. Modeled bar wavelengths are in the range of values predicted for free bars by linear bar theory, and remain far from the theoretical values of hybrid, steady bars. The shift from unvegetated migrating bars to steady vegetated bars seems to show that in these simulations vegetation constitutes a hydraulic forcing, leading to a shift from free bars to forced bars, with a final configuration largely inherited from the initial state. © 2019 John Wiley & Sons, Ltd.     

Effects of river discharge on hyporheic exchange flows in salmon spawning areas of a large gravel‐bed river

The flow magnitude and timing from hydroelectric dams in the Snake River Basin of the Pacific north‐western US is managed in part for the benefit of salmon. The objective of this research was to evaluate the effects of Hells Canyon Dam discharge operations on hydrologic exchange flows between the river and riverbed in Snake River fall Chinook salmon spawning areas. Interactions between river water and pore water within the upper 1 m of the riverbed were quantified through the use of self‐contained temperature and water level data loggers suspended inside of piezometers. The data were recorded at 20 min intervals over a period of 200 days when the mean daily discharge was 218–605 m³ s^?1, with hourly stage changes as large as 1·9 m. Differences in head pressure between the river and riverbed were small, often within ± 2 cm. Measured temperature gradients in the riverbed indicated significant interactions between the surface and subsurface water. At the majority of sites, neither hydraulic nor temperature gradients were significantly affected by either short‐ or long‐term changes in discharge operations from Hells Canyon Dam. Only 2 of 14 study sites exhibited acute flux reversals between the river and riverbed resulting from short‐term, large magnitude changes in discharge. The findings suggest that local scale measurements may not be wholly explanatory of the hydrological exchange between the river and riverbed. The processes controlling surface water exchange at the study sites are likely to be bedform‐induced advective pumping, turbulence at the riverbed surface, and large‐scale hydraulic gradients along the longitudinal profile of the riverbed. By incorporating the knowledge of hydrological exchange processes into water management planning, regional agencies will be better prepared to manage the limited water resources among competing priorities that include salmon recovery, flood control, irrigation supply, hydropower production, and recreation. Copyright © 2007 John Wiley & Sons, Ltd.     

The measurement of river bank erosion and lateral channel change: A review

A detailed review and chronological survey is presented of the various techniques which have been used for the measurement of river bank erosion and channel change. The techniques are classified according to the time scales involved (long, intermediate and short) and each is discussed with respect to accuracy and repeatability. The methods covered include sedimentological evidence, botanical evidence, historical sources, planimetric resurvey, repeated cross-profiling, erosion pins and terrestrial photogrammetry. Prospects for future developments are also discussed.     

Effects of wet meadow riparian vegetation on streambank erosion. 1. Remote sensing measurements of streambank migration and erodibility

We quantified how rates of stream channel migration in a montane meadow vary as a function of the riparian vegetation community. The South Fork of the Kern River at Monache Meadow, located in California's southern Sierra Nevada range, supports two distinct types of vegetation: a dry meadow community dominated by sagebrush and non‐native grasses (xeric scrub and meadow), and a wet meadow community dominated by rushes and sedges (hydric graminoids). We measured rates of lateral stream migration for dry versus wet meadow reaches from aerial photographs spanning a 40‐year period (1955–1995). While stream migration rates averaged only 0·24 ± 0·02 m a^?1 in the wet meadow, the dry meadow channel migrated an average of 1·4 ± 0·3 m a^?1. We used a linear model of meander migration to calculate coefficients that characterize bank migration potential, or bank erodibility, independent of channel curvature. These calculations demonstrate that, at Monache Meadow, banks without wet meadow vegetation are roughly ten times more susceptible to erosion than banks with wet meadow vegetation. Where stream bank heights consistently exceed 1 m, low water availability creates riparian habitats dominated by dry meadow vegetation. Thus, channel incision may reduce bank stability not only by increasing bank height, but also by converting banks from wet meadow to dry meadow vegetation. Copyright © 2002 John Wiley & Sons, Ltd.     

The influence of meander bend evolution on the formation of multiple cutoffs: findings inferred from floodplain architecture and bend geometry

The evolution of meander bends and formation of cutoffs, including a series of cutoffs developed simultaneously in a number of bends, have been investigated by many researchers. However, relatively little is known about factors that lead to the development of multiple cutoffs that are formed subsequently at one location. The present study aims to determine the influence of meander bend development on multiple chute cutoff formation in a single bend. The research is based on the sedimentary record of meander migration and cutoffs preserved in a lowland river floodplain (the lower Obra River, Poland). Analysis of changes in meander geometry was conducted to describe the influence of their migration on cutoff formation and in other rivers where multiple cutoffs occurred. The results showed that multiple cutoffs in the lower Obra River have occurred during the last 3000 years, owing to the interaction of upstream and downstream controls: migration of meander bends in opposing directions accompanied by an increase of flood frequency and sediment supply. The flow and sediment supply has been further altered since the nineteenth century due to anthropogenic impacts: an artificial cutoff of the downstream bend and elevation of channel levées. Similar mechanisms driving the formation of multiple cutoff have been found in other river courses, despite significantly higher energy of the compared rivers. Moreover, development of a confined‐shape bend (caused by artificial barrier or autogenic bend behaviour) may also favour the formation of multiple cutoffs. However, counter migration of meanders enhanced by increased flood frequency and sediment supply are primary triggers for such events. Copyright © 2015 John Wiley & Sons, Ltd.     

A model of equilibrium bed topography for meander bends with erodible banks

Channel curvature produces secondary currents and a transverse sloping channel bed, along which the depth increases towards the outer bank. As a result deep pools tend to form adjacent to the outer bank, promoting bank collapse. The interaction of sediment grains with the primary and secondary flow and the transverse sloping bed also causes meanders to move different grain sizes in different proportions and directions, resulting in a consistent sorting pattern. Several models have been developed to describe this process, but they all have the potential to over‐predict pool depth because they cannot account for the influence of erodible banks. In reality, bank collapse might lead to the development of a wider, shallower cross‐section and any resulting flow depth discrepancy can bias associated predictions of flow, sediment transport, and grain‐size sorting. While bed topography, sediment transport and grain sorting in bends will partly be controlled by the sedimentary characteristics of the bank materials, the magnitude of this effect has not previously been explored. This paper reports the development of a model of flow, sediment transport, grain‐size sorting, and bed topography for river bends with erodible banks. The model is tested via intercomparison of predicted and observed bed topography in one low‐energy (5·3 W m^?2 specific stream power) and one high‐energy (43·4 W m^?2) study reach, namely the River South Esk in Scotland and Goodwin Creek in Mississippi, respectively. Model predictions of bed topography are found to be satisfactory, at least close to the apices of bends. Finally, the model is used in sensitivity analyses that provide insight into the influence of bank erodibility on equilibrium meander morphology and associated patterns of grain‐size sorting. The sensitivity of meander response to bank cohesion is found to increase as a function of the available stream power within the two study bends. Copyright © 2002 John Wiley & Sons, Ltd.     

Determination of bankfull discharge magnitude and frequency: comparison of methods on 16 gravel‐bed river reaches

Bankfull discharge is identified as an important parameter for studying river morphology, sediment motion, flood dynamics and their ecological impacts. In practice, the determination of this discharge and its hydrological characteristics is not easy, and a choice has to be made between several existing methods. To evaluate the impact of the choice of methods, five bankfull elevation definitions and four hydrological characterizations (determination of duration and frequency of exceedance applied to instantaneous or mean daily data) were compared on 16 gravel‐bed river reaches located in France (the catchment sizes vary from 10 km² to 1700 km²). The consistency of bankfull discharge estimated at reach scale and the hydraulic significance of the five elevation definitions were examined. The morphological definitions (Bank Inflection, Top of Bank) were found more relevant than the definitions based on a geometric criterion. The duration of exceedance was preferred to recurrence intervals (partial duration series approach) because it is not limited by the independency of flood events, especially for low discharges like those associated with the Bank Inflection definition. On average, the impacts of the choice of methods were very important for the bankfull discharge magnitude (factor of 1·6 between Bank Inflection and Top of Bank) and duration of exceedance or frequency (respectively a factor 1·8 and 1·9 between mean daily and instantaneous discharge data). The choice of one combination of methods rather than another can significantly modify the conclusions of a comparative analysis in terms of bankfull discharge magnitude and its hydrological characteristics, so that one must be cautious when comparing results from different studies that use different methods. Copyright © 2006 John Wiley & Sons, Ltd.     

Texture‐based image segmentation applied to the quantification of superficial sand in salmonid river gravels

The presence of ?ne sediment in river gravels is widely recognized as being detrimental to salmonid habitat quality. In order to facilitate quanti?cation of sand presence at larger scales, this paper presents an application of image processing allowing for rapid and accurate assessments of super?cial sand presence in dry exposed ?uvial gravels. Images for the process are acquired with a 35 mm SLR ?lm camera and then scanned with a desktop scanner. Texture‐based segmentation is then applied to differentiate between sand and clast areas. Results show that the method is accurate and therefore it offers an alternative to bulk sampling in cases where rapid assessments of sand presence are required. Copyright © 2005 John Wiley & Sons, Ltd.     

Quantification of bank erosion in a drained agricultural lowland catchment

The long‐term and current volumes of sediment exported from stream banks were calculated as potential sources of sediment in a large pond located at the catchment outlet of a small agricultural lowland basin strongly affected by anthropogenic pressure in France. Bank erosion was measured over a short period using a network of erosion pins along a small stream (1400 m long) to quantify the material exported during a single winter (2012–2013). The material exported by this same stream over the last 69 years was quantified using an original approach involving the comparison of a compilation of three‐dimensional historical stream redesign plans that date back to 1944 with the state of the banks in 2013 (differential global positioning system and LiDAR data). The results suggest that a global trend of material loss along the stream banks monitored by erosion pins, with an average erosion rate of 17.7 mm year^?1 and an average volume of exported material of 75 t km^?1. Over 69 years, this same stream exported an average of 36 t km^?1 year^?1, and the average loss of material from the banks throughout the whole catchment was estimated to be 14 t km^?1 year^?1. The contribution of bank material to the filling of the pond over the last 10 years is between 46% and 52% based on an extrapolation of erosion pin dynamics or between 27% and 30% based on the comparison of LiDAR data to the average historical profile extrapolated for the catchment. These results suggest that bank erosion represents a major source of sediment in degraded waters in traditionally understudied agricultural lowland catchments, where anthropogenic pressures are high.     

Riffle‐pool morphometry and stage‐dependant morphodynamics of a large floodplain river (Vereinigte Mulde,Sachsen‐Anhalt,Germany)

Riffle‐pool sequences are a common feature of gravel‐bed rivers. However, mechanisms of their generation and maintenance are still not fully understood. In this study a monitoring approach is employed that focuses on analysing cross‐sectional and longitudinal channel geometry of a large floodplain river (Vereinigte Mulde, Sachsen‐Anhalt, Germany) with a high temporal and spatial resolution, in order to conclude from stage‐dependant morphometric changes to riffle and pool maintaining processes. In accordance with previous authors, pool cross‐sections of the Mulde River are narrow and riffle cross‐sections are wide suggesting that they should rather be addressed as two general types of channel cross‐sections than solely as bedforms. At high flows, riffles and pools in the study reaches changed in length and height but not in position. Pools were scoured and riffles aggraded, a development which was reversed during receding flows below the threshold of 0·4Q_bf (40% bankfull discharge). An index for the longitudinal amplitude of riffle‐pool sequences, the bed undulation intensity or bedform amplitude, is introduced and proved to be highly significant as a form parameter, its first derivative as a process parameter. The process of pool scour and riffle fill is addressed as bedform maintenance or bedform accentuation. It is indicated by increasing longitudinal bed amplitudes. According to the observed dynamics of bed amplitudes, maintenance of riffle‐pool sequences lags behind discharge peaks. Maximum bed amplitudes may be reached with a delay of several days after peak discharges. Increasing bed undulation intensity is interpreted to indicate bed mobility. Post‐flood decrease of the bed undulation intensity indicates a retrograde phase when transport from pools to riffles has ceased and bed mobility is restricted to riffle tails and heads of pools. This type of transport behaviour is referred to as disconnected mobility. The comparison of two river reaches, one with undisturbed sediment supply, the other with sediment deficit, suggests that high bed undulation intensity values at low flows indicate sediment deficit and potentially channel degrading conditions. It is more generally hypothesized that channel bed undulations constitute a major component of form roughness and that increased bed amplitudes are an important feature of channel bed adjustment to sediment deficit be it temporally during late floods or permanently due to a supply limitation of bedload. Copyright © 2011 John Wiley & Sons, Ltd.