A New Method for Determining Compound Specific Carbon Isotope of Chlorinated Solvents in Porewater

A new method for the extraction of chlorinated solvents (CSs) from porewater with dimethylacetamide (DMA) used as a solvent and the determination of δ¹³C by gas chromatography-isotope ratio mass spectrometry (GC-IRMS) with solid-phase microextraction (SPME) are presented. This method was used for the determination of δ¹³C of chloroethenes and chloromethanes. The extraction of the CSs from porewater with DMA led to a minimal loss of mass of solvent and chlorinated compounds. The accuracy of the method was verified with the analysis of the pure injected compounds using elemental analyzer—isotope ratio mass spectrometry (EA-IRMS). It has been effectively applied in a study area in saturated soil samples of a pollutant source zone of perchloroethylene (PCE) and trichloroethylene (TCE). The limit of quantification of the new method was 0.034 μg/g for PCE and TCE for 10–20 g of soil sample. This new method allows for compound-specific isotope analysis of CSs in porewater, which can be beneficial in sites where the identification of contamination sources and the behavior of the contaminants are not clear.     

Cloud Point Extraction for the Preconcentration of Silver and Palladium in Real Samples and Determination by Atomic Absorption Spectrometry

A cloud point extraction procedure is presented for the preconcentration and simultaneous determination of Ag⁺ and Pd²⁺ in various samples. After complexation with 2‐((2‐((1H‐benzo[d]imidazole‐2‐yl)methoxy)phenoxy)methyl)‐1H‐benzo[d]imidazol (BIMPI), which was used as a new chelating agent, analyte ions were quantitatively extracted to a phase rich in Triton X‐114 following centrifugation, and determination was carried out by flame atomic absorption spectrometry (FAAS). Under the optimum experimental conditions (i. e., pH = 7.0, 15.0·10^–5 mol/L BIMPI and 0.036% (w/v) Triton X‐114), calibration graphs were linear in the range of 28.0–430.0 μg/L and 57.0–720.0 μg/L with detection limits of 10.0 and 25.0 μg/L for Ag⁺ and Pd²⁺, respectively. The enrichment factors were 35.0 and 28.0 for Ag⁺ and Pd²⁺, respectively. The method has been successfully applied to evaluate these metals in some real samples, including waste water, soil and hydrogenation catalyst samples.     

The Use of Polyphenolic Compounds from Black Tea for the Solid Phase Extraction and Determination of Trace Iron in Drinking Water

A simple and selective solid phase extraction procedure for the trace analysis of iron(III) in water samples has been developed. Sodium dodecyl sulfate coated alumina, modified with polyphenolic compounds (extracted from black tea) was used for the extraction and preconcentration of iron(III) from water samples before determination by flame atomic absorption spectrometry. Due to the complexation reaction between iron(III) and polyphenol compounds, iron(III) was quantitatively extracted on the proposed sorbent and then eluted by 2.0 mL of HCl (1.0 mol/L). The effects of extraction parameters, such as pH and volume of sample solution, amount of polyphenolic compounds, type of eluting agent and the effect of interfering ions on the extraction of iron(III), were investigated. It was found that the proposed method had a good linear range (15.0–100.0 μg/L) and a low detection limit (10.0 μg/L). The procedure was successfully applied for iron determination in drinking water samples.     

Determination of Trace Levels of Nickel and Manganese in Soil,Vegetable, and Water

A simple and reliable method for rapid and selective extraction and determination of trace levels of Ni²⁺ and Mn²⁺ was developed by ionic liquid (IL) based dispersive liquid–liquid microextraction coupled to flame atomic absorption spectrometry (FAAS) detection. The proposed method was successfully applied to the preconcentration and determination of nickel and manganese in soil, vegetable, and water samples. After preconcentration, the settled IL‐phase was dissolved in 100 µL of ethanol and aspirated into the FAAS using a home‐made microsample introduction system. Injection of 50 µL of each analyte into an air–acetylene flame provided very sensitive spike‐like and reproducible signals. Effective parameters such as pH, amount of IL, volume of the disperser solvent, concentration of the chelating agent, and effect of salt concentration were inspected by a (2^5‐1) fractional factorial design to identify the most important parameters and their interactions. Under optimum conditions, preconcentration of 10 mL sample solution permitted the detection of 0.93 µg L^?1 Ni²⁺ and 0.52 µg L^?1 Mn²⁺ with enrichment factors 77.2 and 82.6 for Ni²⁺ and Mn²⁺, respectively. The accuracy of the procedure was evaluated by analysis of a certified reference material (CRM TMDW‐500, drinking water).     

Selective Separation and Preconcentration of Fe(III) and Zn(II) Ions by Solvent Extraction Using a New Triketone Reagent

A simple, rapid, and accurate method was developed for separation and preconcentration of trace levels of iron(III) and zinc(II) ions in environmental samples. Methyl‐2‐(4‐methoxy‐benzoyl)‐3‐(4‐methoxyphenyl)‐3‐oxopropanoylcarbamate (MMPC) has been proposed as a new complexing agent for Fe(III) and Zn(II) ions using solvent extraction prior to their determination by flame atomic absorption spectrometry (FAAS). Fe(III) and Zn(II) ions can be selectively separated from Fe(II), Pb(II), Co(II), Cu(II), Mn(II), Cr(III), Ni(II), Cd(II), Ag(I), Au(III), Pd(II), Cr(VI), and Al(III) ions in the solution by using the MMPC reagent. The analytical parameters such as pH, sample volume, shaking time, amount of MMPC reagent, volume of methyl isobutyl ketone (MIBK), effect of ionic strength, and type of back extractant were investigated. The recovery values for Fe(III) and Zn(II) ions were greater than 95% and the detection limits for Fe(III) and Zn(II) ions were 0.26 and 0.32 µg L^?1, respectively. The precision of the method as the relative standard deviation changed between 1.8 and 2.1%. Calibration curves have a determination coefficient (r²) of at least 0.997 or higher. The preconcentration factor was found to be 100. Accuracy of the method was checked by analyzing of a certified reference material and spiked samples. The developed method was applied to several matrices such as water, hair, and food samples.     

A Multi‐Element Ion‐Pair Extraction for Trace Metals Determination in Environmental Samples

A multi‐element ion‐pair extraction method was described for the preconcentration of Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Ni(II), Pb(II), and Zn(II) ions in environmental samples prior to their determinations by flame atomic absorption spectrometry (FAAS). As an ion‐pair ligand 2‐(4‐methoxybenzoyl)‐N′‐benzylidene‐3‐(4‐methoxyphenyl)‐3‐oxo‐N‐phenyl‐propono hydrazide (MBMP) was used. Some analytical parameters such as pH of sample solution, amount of MBMP, shaking time, sample volume, and type of counter ion were investigated to establish optimum experimental conditions. No interferences due to major components and some metal ions of the samples were observed. The detection limits of the proposed method were found in the range of 0.33–0.9 µg L^?1 for the analyte ions. Recoveries were found to be higher than 95% and the relative standard deviation (RSD) was less than 4%. The accuracy of the procedure was estimated by analyzing the two certified reference materials, LGC6019 river water and RTC‐CRM044 soil. The developed method was applied to several matrices such as water, hair, and food samples.     

Selective Separation/Preconcentration of Silver Ion in Water by Multiwalled Carbon Nanotubes Microcolumn as a Sorbent

The present paper proposes the application of multiwalled carbon nanotubes (MWCNTs) as a solid adsorbent for selective separation/preconcentration of silver(I) in water samples prior to flame atomic absorption spectrometry. The procedure is based on the solid phase extraction of Ag(I)–2‐mercaptobenzothiazole chelate on MWCNTs. The elution step is carried out with 5 mL of 2 mol L^?1 HNO₃ in acetone solution at a flow rate of 1.0 mL min^?1. The influences of the various analytical parameters including pH of the solution, eluent type, sample volume, flow rates of eluent, matrix ions were investigated for optimization of the presented procedure. Tests of addition/recovery for analyte ion in real samples were performed with satisfactory results. Preconcentration factor and limit of detection for Ag(I) were 160 and 0.21 µg L^?1, respectively. The synthesized MWCNT exhibited excellent stability in eluent solution and its adsorption capacity was 5.4 mg of silver per gram of sorbent. The proposed method was successfully applied to trace silver determination in a variety of environmental water samples.     

Detection of Pharmaceuticals and Personal Care Products in Agricultural Soils Receiving Biosolids Application

Increasing research has suggested that biosolids generated from municipal wastewater treatment can be a major sink for many pharmaceuticals and personal care products (PPCPs) and their land application potentially introduces these contaminants into the terrestrial and aquatic environments. In this study, methods were developed for the analysis of 14 PPCPs in biosolids and soils using pressurized liquid extraction, solid phase extraction and liquid chromatography‐tandem mass spectrometry. Recoveries were over 50% for all analytes except diphenhydramine (?30%) in soils. Soil properties or type of biosolids showed minor effects on method recoveries. Estimated method limits of quantification (LOQ) range from 0.1–15 ng g^–1 for soil and 0.3–27 ng g^–1 for biosolids. A field study utilizing the methods revealed that other than carbamazepine‐10,11‐epoxide, all targeted compounds were detected in biosolids. Diphenhydramine, fluoxetine, triclosan and triclocarban were detected up to the μg g^–1 range with the highest concentration of 23 μg g^–1 for triclocarban. Seven of the PCCPs found in biosolids were also detected in agricultural soils amended with these biosolids and several (carbamazepine, diphenhydramine, and triclocarban) appeared to be persistent in soils. Triclocarban was also found most abundant in soils with the highest average concentration of 0.2 μg g^–1 while the rest of compounds were in the lower ng g^–1 range. Generally, the concentrations found on the fields were 2–3 degrees of magnitude lower than in the biosolids, which is likely to be due to dilution, degradation and leaching processes.     

Separation and Preconcentration of Cobalt Using a New Schiff Base Derivative on Amberlite XAD‐7

In this study, a new solid‐phase extraction procedure has been developed for preconcentration and determination of Co ions in different water samples by flame atomic absorption spectrometry (FAAS). Cobalt was preconcentrated as N,N′‐bis(pyridine‐2‐yl‐methyl)benzene‐1,4‐diamine (Co‐BPMBDA) from sample solutions using a column containing Amberlite XAD‐7 and was determined. In order to achieve the best performance for the method, effects of several parameters such as pH, concentrations of ligand, sample flow rate, eluent, and matrix ions on the method efficiency were investigated. Under optimum conditions, the preconcentration factor was found to be 200 for 1000 mL waters samples. Detection limit based on the 3S_b criterion was calculated as 0.24 µg/L for 100 mL of sample solution and relative standard deviation was found to be 1.8%. The method was applied to determine the trace amounts of cobalt in water samples.     

Development of an Enzyme Immunoassay for the Analysis of the Atrazine Metabolite Hydroxyatrazine Entwicklung eines Enzymimmunoassays zur Analyse des Atrazin-Metaboliten Hydroxyatrazin

A highly sensitive and specific enzyme immunoassay (EIA) is described for the detection of the atrazine metabolite hydroxyatrazine. Polyclonal antibodies were raised in rabbits by immunization with a hapten-bovine serum albumin (BSA) conjugate containing 8 hapten residues per molecule of BSA. An EIA with a horseradish peroxidase (HRP) hapten tracer was optimized in microtitre plates. A concentration of 50% B/B₀ was found at 0.10 μg/L for hydroxyatrazine. A limit of determination for hydroxyatrazine was reached at approximately 0.01 μg/L, i.e. well below the maximum concentration permitted by the EU guidelines for drinking water and the drinking water ordinance of the FRG. The assay did not require concentration or clean-up steps for drinking water or ground water samples. Validation experiments confirmed a good accuracy and precision. Hydroxyatrazine is reported to be the main atrazine metabolite found in soil samples. As organic solvents are usually employed for soil extraction, the influence of methanol as representative organic solvent on the assay was examined. Up to a concentration of 5% (v/v) methanol, the organic solvent did not affect the assay.     

Intercomparison of soil pore water extraction methods for stable isotope analysis

Measurements of δ²H and δ¹⁸O composition of pore waters in saturated and unsaturated soil samples are routinely performed in hydrological studies. A variety of in‐situ and lab‐based pore water extraction methods for the analysis of the stable isotopes of water now exist. While some have been used for decades (e.g. cryogenic vacuum extraction) others are relatively new, such as direct vapour equilibration or the microwave extraction technique. Despite their broad range of application, a formal and comprehensive intercomparison of soil water extraction methods for stable isotope analysis is lacking and long overdue. Here we present an intercomparison among five commonly used lab‐based pore water extraction techniques (high pressure mechanical squeezing, centrifugation, direct vapour equilibration, microwave extraction, and cryogenic extraction). We applied these extraction methods to two physicochemically different soil types that were dried and rewetted with water of known isotopic composition at three different water contents. Our results showed that the extraction approach can have a significant effect on pore water isotopic composition as all methods exhibited significant deviations from the spiked reference water, depending secondarily on the soil type and soil water content. Most pronounced, cryogenic water extraction showed large deviations from the spiked reference water, whereas mechanical squeezing and centrifugation provided results closest to the spiked water for both soil types. We also compared results for each extraction method – where liquid water was obtained – on both an OA‐ICOS and IRMS. Differences between these two analytical instruments were negligible for these organic compound‐free waters. We suggest that users of soil water extraction approaches carefully choose an extraction technique that is suitable for the specific research question, adapted to the dominant soil type and water content of the study. Copyright © 2016 John Wiley & Sons, Ltd.     

Chromatographic Separation and Analytic Procedure for Priority Organic Pollutants in Urban Air

A separation procedure was developed for analysis of polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) in urban air, while simultaneously eliminating the interfering compounds. This was carried out by optimization of a column chromatograph with regard to the eluent type (n‐hexane and n‐pentane), volume of eluent, type of sorbent material (silica gel and florisil) and activation level of the sorbent material. The determination of the level of PCBs and PAHs was carried out using gas chromatography (GC) equipped with a mass selective detector (MSD), while determination of the OCPs was carried out by GC equipped with an electron capture detector (μ‐ECD). The use of a silica gel column (10 g, 5% deactivated with H₂O) with 70 mL of n‐hexane gave satisfactory separation of PCBs from PAHs and OCPs. After collecting the PCBs with 70 mL of n‐hexane, 3·20 mL of n‐hexane:ethyl acetate, (1:1, v:v) was adequate for elution of the PAHs and OCPs from the column. The primary aim of this study was to develop a multimethod for analyses of PCBs, PAHs, and OCPs in urban air as well as reducing solvent and sorbent consumption and analysis time during the clean‐up procedure compared to the US EPA standard methods (EPA methods TO‐13A for PAHs and TO‐4A for both PCBs and OCPs).     

Differential Pulse Polarographic Determination of the Oxime Carbamante Insecticide Alanycarb

As basis for the development of a sensitive analytical method for the determination of the insecticide alanycarb, a study of the differential pulse polarographic (DPP) reduction of alanycarb on a dropping mercury electrode (DME) was performed. The pesticide was found to give a single DP peak over the pH range 1.0 to 6.0 and the pH dependency of the peak potential showed a linear segment with a slope of 65.2 mV (at 20°C). For the analytical DPP method running at pH 6.0 (peak at –503.4 mV), the relationship between the peak current and alanycarb concentration was linear in the range of 1.10 to 9.76 μg mL^–1 with a detection limit of 0.33 μg mL^–1. The proposed method was applied for the determination of alanycarb in spiked dam water and orange juice samples. The recoveries calculated for both types of dam water and orange juice samples spiked with 12.0 μg mL^–1 alanycarb were 96.3 and 99.0% with relative standard deviations of 5.2 and 1.3%, respectively. The sufficiently good recoveries and low relative standard deviations for the data reflect the high accuracy and precision of the proposed differential pulse polarographic method. The effects of diverse metal ions and other commonly used pesticides on the determination of alanycarb were also investigated.     

A Simplified Analytical Procedure for the Determination of Organically Bound Halogens in Salt‐containing Water Samples

A method was developed for the determination of organic halogens in water samples with the aim of minimizing matrix effects and simplifying the sample preparation technique commonly used. The method is based on the adsorption of organic halogens in modified hydrophilic divinylbenzene polymer columns and their elution with methanol. The adsorbent used enables rapid adsorption and desorption due to comparatively high operating flow rates and minimized solvent amounts. Furthermore, no additional reconcentration steps are needed. The methanol extract obtained is combusted with a standard EOX (extractable organic halogen) analyzer and the concentration of organically bound halogens is determined by microcoulometric analysis. The matrix effects are considerably reduced compared to the standard procedure (EN 1485) commonly used. A detection limit of 13 μg/L was established.     

Field Study of Enhanced TCE Reductive Dechlorination by a Full‐Scale Whey PRB

This study evaluates the efficiency of a full‐scale, 81 m‐wide permeable reactive barrier (PRB) configured by injection of dairy whey in the downgradient region of a contaminant source zone to enhance the in situ biodegradation of high concentrations (10² to 10³μg/L) of chlorinated ethenes (CEs). Ten biannual whey injections were completed in a 3.5‐year pilot phase and 1.5‐year operational phase. Improved and sustained dechlorination was observed at extraction/injection and downgradient wells in the fully‐operational phase, when dried whey masses were increased from 13.6 kg to 230–360 kg, whey slurry volumes were increased from 2300 L to 307,000–480,000 L, and extraction/injection well loops were employed for the application of whey. At extraction/injection wells, CEs decreased to low (≤10 μg/L) or undetectable levels. At downgradient wells, average trichloroethene concentrations decreased, by as much as 100% (from ≤384.2 during the pilot phase to ≤102.6 μg/L during the operational phase), while average cis‐dichloroethene concentrations decreased by as much as 57.5% (from ≤6466.1 to ≤4912.2 μg/L). Downgradient vinyl chloride averages either increased by as much as 63.8% (from ≤859.6 to ≤1407.9 μg/L) or decreased by 64.0% (from 1375.4 to 880 μg/L). Downgradient ethene + ethane averages increased by as much as 73.2% (from ≤1145.3 to ≤1347.1 μg/L). On the basis of the 2008 average market price, the estimated material cost of whey is $1.96/kg organic carbon or, for the configuration of an 81 m PRB by biannual application of 300 kg whey, $325/year. Carbon substrate cost comparisons and implications for efficient in situ treatment design are discussed.     

On‐line Solid Phase Extraction of Copper in Water Samples with Flow Injection Flame Atomic Absorption Spectrometry

An on‐line solid phase extraction method for the preconcentration and determination of Cu(II) by flame atomic absorption spectrometry has been described. The procedure is based on the retention of Cu(II) ions at pH 6.0 on a minicolumn packed with Amberlite XAD‐1180 resin impregnated with chrome azurol S. After preconcentration, Cu(II) ions adsorbed on the impregnated resin were eluted by 1 mol L^?1 HNO₃ solution. Several parameters, such as pH, type of eluent, flow rates of sample and eluent solutions, amount of resin were evaluated. At optimized conditions, for 3.5 min of preconcentration time, the system achieved a detection limit of 1.0 µg L^?1, and a relative standard deviation of 1.2% at 0.2 µg mL^?1 copper. An enrichment factor of 56‐fold was obtained with respect to the copper determination. The proposed method was successfully validated by the analysis of standard reference material (TMDA 54.4 lake water) and recovery studies. The method was applied to the preconcentration of Cu(II) in natural water samples.     

Evaluation of Bioavailability and Partitioning of Aluminum in Sediment Samples of Different Ecosystems by Modified Sequential Extraction Methods

Sequential extraction procedures are widely used to characterize the different operational fractions with different potential toxicity of metals in environmental solid samples. The present work describes the application of different analytical approaches for sequential extraction of aluminum to evaluate its mobility, availability, and persistent chemical forms in sediment samples of different fresh water ecosystems (lake, canal, and river). The conventional BCR three‐stage sequential extraction procedure (C‐BCR) was modified at each stage, by applying ultrasonic device (U‐BCR), in order to shorten the required shaking time of 16 h for each three steps (excluding the hydrogen peroxide digestion in step 3, which was not performed with ultrasonic bath), could be completed in 40, 50, and 45 min, respectively. The aluminum in all extracts were determination by atomic absorption spectrometry using nitrous oxide – acetylene flame. The accuracy of results obtained from C‐BCR and proposed U‐BCR was verified with literature reported values of certified sediment sample (BCR 701). The overall recoveries of aluminum obtained by proposed U‐BCR were found in the range of 96.7–113% of those values obtained with C‐BCR for all fractions. Use of ultrasonic device, provided a large saving in extraction time relative to conventional shaking. It was observed that major part of Al in real sediment samples (80–83% of total Al) were bound to residual fraction. The acid soluble fraction of aluminum extracted by 0.11 mol/L CH₃COOH has good correlation with aluminum content in corresponding water samples of each ecosystem.     

Novel Polymeric Resin for Solid Phase Extraction and Determination of Lead in Waters

Interest in preconcentration techniques for the determination of metals at ultratrace levels still continues increasingly because of some disadvantages of flameless atomic absorption spectrometry and the high costs of other sensitive methods in compared to flame atomic absorption spectrometry (FAAS). Among preconcentration techniques, solid‐phase extraction is the most popular because of a number of advantages. In this work, thiol‐containing sulfonamide resin was synthesized, characterized, and applied as a new sorption material for solid phase extraction and determination of lead in natural water samples. The optimization of experimental conditions was performed using the parameters including pH, contact time, and volumes of initial and elution solutions. After preconcentration procedure, FAAS was used for determinations. The synthesized resin exhibits the superiority in compared to the other adsorption reagents because of the fact that there is no necessity of any complexing reagent as well as high sorption capacity. Consequently, 280‐fold improvement in the sensitivity of analytical scheme was achieved by combining the slotted tube atom trap‐atomic absorption spectrometry (STAT‐FAAS) and the developed preconcentration method. The limit of detection was found to be 0.15 ng mL^?1. The Pb²⁺ concentrations in the studied water samples were found to be in the range of 0.9–6.7 ng mL^?1.     

Rapid Analysis of 1,4‐Dioxane in Groundwater by Frozen Micro‐Extraction with Gas Chromatography/Mass Spectrometry

An innovative micro‐extraction of aqueous samples coupled with gas chromatography/mass spectrometry in selected ion‐monitoring mode (GC/MS‐SIM) was developed to selectively analyze for 1,4‐dioxane with low part‐per‐billion detection sensitivity. Recoveries of 1,4‐dioxane ranged from 93% to 117% for both spiked laboratory reagent water and natural groundwater matrices, the later having elevated organic carbon content (8.34 ± 0.31 mg/L as total organic carbon). We observed that freezing the aqueous sample along with the extraction solvent enhanced the extraction efficiency, minimized physical interferences, and improved sensitivity resulting in a limit of detection for 1,4‐dioxane to approximately 1.6 μg/L. This method substantially reduces the labor, time, reagents and cost, and uses instruments that are commonly found in analytical laboratories. This method requires a relatively small sample volume (200 μL), and can be considered a green analytical method as it minimizes the use of toxic solvents and the associated laboratory wastes.     

Applying the bootstrap technique for studying soil redistribution by caesium-137 measurements at basin scale

Abstract

The use of the bootstrap technique to estimate the reference level of¹³⁷ Cs in an uneroded site is tested. The analysis is developed using ¹³⁷Cs measurements made in a small experimental Sicilian basin. In the reference area the ¹³⁷Cs activity is normally distributed with a known sample mean value, m equal to 94.4 mBq cm^?2. The influence of¹³⁷ Cs reference site sampling was determined generating samples having a fixed size, N and six different values of the sample coefficient of variation, CV, by a Monte Carlo technique. Then, for each size N, the probability distribution of the mean μ of the sequences generated by Monte Carlo technique is defined. The soil redistribution is determined, both at morphological unit and basin scale, using the proportional method of Martz & de Jong for calculating the net soil loss. The analysis showed that the spatial distribution of the net soil loss E _i, and the basin value E _b are independent of the sample size, N, and the coefficient of variation, CV, of the samples drawn from the reference area, if the bootstrap technique is applied for estimating the mean μ(μ) to use as reference value. The soil redistribution is also examined using as reference value the quantiles μ2.5, μ25, μ75, μ97.5 corresponding to a frequency F(μ) equal to 2.5, 25, 75 and 97.5%, respectively. In conclusion, the analysis established that a robust estimate of the reference value can be obtained even in fields where a small number of samples was drawn (high CV of the ¹³⁷Cs activity of the field samples), using the bootstrap technique for generating sequences of reference values having known mean value m (the mean value of the ¹³⁷Cs activity of the drawn field samples) and large sample size (N = 50).