Incipient weathering rind development on introduced machine‐polished granite discs in an Arctic alpine environment,northern Scandinavia

Weathering rinds, zones of alteration on the exterior surfaces of rock outcrops and coarse unconsolidated surficial debris are widely used by geomorphologists and Quaternary geologists as indicators of the relative age of landforms and landscapes. Additionally they provide unique insights into the earliest stages of rock and mineral weathering, yet the origin of these alteration zones is relatively poorly understood. This lack of understanding applies especially to the initial stages of rind formation. The study reported in this paper has two principal objectives. The first is to use lightly polished granite discs inserted in soil profiles under several different plant communities in an Arctic alpine environment for a period of four or five years to investigate the nature of incipient weathering rind development. The second is to investigate the factors responsible for spatial variability in the nature and rates of rind formation. Incipient weathering rind development on the outer edges of the granite discs is observable and measurable over a period of time as short as four years in the mild Arctic alpine environment of Swedish Lapland. The earliest stages of rind development involve the development of a porous structure consisting of a combination of pits and fractures which have been solutionally enlarged and modified. Solution appears to be preferentially concentrated on the surfaces of feldspars and, to a lesser extent, quartz. In addition, iron oxides are present along grain boundaries and in grain interiors and are interpreted to have been derived from the oxidation of ferromagnesian minerals. Spatial variability in weathering rind development appears to be particularly driven by differences in moisture but is not related to soil pH. Copyright © 2005 John Wiley & Sons, Ltd.     

The role of peri‐glacial active layer development in determining soil‐regolith thickness across a Triassic sandstone outcrop in the UK

This paper examines the weathering processes that have combined to produce the distribution of soil‐regolith (SR) thickness across the Triassic Sherwood Sandstone Group outcrop (750 km²) in Nottinghamshire, UK. Archive borehole logs (n = 282) taken across the outcrop showed that SR thickness had mean and median depths of ~1·8 and 1·5 m, respectively. Cores were taken from a forested site to depths ~3 m for geochemical analysis. At this site the SR thickness was ~1·7 m. Analysis of the loss of elements, compared to bedrock using mass balance calculations (τ) showed that all the calcite and gypsum cement had been removed to depths of >3 m. Thus the major difference between the SR and the underlying saprolite was that the former exists as loose sand as opposed to a semi‐durable rock. Scanning electron microscopy (SEM) analysis of core samples suggested that the non‐durable rock or saprolite had greater cementation of clay particles. We propose that the mechanism through which the clay cement (and other interlocking grain bonds) was eased apart was through freeze–thaw processes associated with the summer ‘active layer development (ALD)’ during the last glacial activity in the UK. We tested this theory by developing a Monte Carlo simulation based on a simplified version of the Stefan equation. Current Arctic datasets of air and ground temperatures were obtained to provide reasonable starting conditions for input variables. These were combined with known data for thermal conductivity, bulk density and moisture content of the Sherwood Sandstone regolith. Model predictions (n = 1000) of the distribution of SR thickness accurately reflect the observed distribution thickness from the borehole logs. This is strong evidence that freeze–thaw and ‘ALD’ processes are major factors in determining the thickness of SR across this outcrop. British Geological Survey © NERC 2012     

Spatial patterns of soil water balance on intensively cultivated hillslopes in a semi‐arid environment: the impact of rock fragments and soil thickness

During past decades, a diverse system of subsistence agriculture in south‐east Spain (annual rainfall of less than 300 mm) has been overturned in favour of large‐scale plantations of almond trees without consideration for topography and related spatial patterns in soil hydrological properties. The objective of this paper is to investigate the spatial pattern in soil physical properties induced by this cultivation system, and to highlight its impact on the water balance. Soil properties were recorded along hillslopes with shallow soils developed on slates and greywackes in the upper part of the Guadelentin drainage basin (Murcia region). Frequent tillage of these almond plantations covering entire hillslopes has resulted in denudation by tillage erosion on the topographic convexities, as well as transport of rock fragments and fine earth along the slopes. These processes have created a systematic spatial pattern of soil thickness and rock fragment content: shallow and stony soils on the topographic convexities and deep soils with a rock fragment mulch in the concavities at the foot of the slopes. At the same time, a negative relationship between rock fragment content and fine earth bulk density was observed. The impact of this spatial pattern in soil properties on the water balance was evaluated using the PATTERN one‐dimensional hydrological and plant growth model. The model simulates the water balance of soil profiles covering the observed variation in soil thickness, stoniness and bulk density. The model results indicate that the highest rates of infiltration, evaporation and drainage, as well as the lowest rates of overland flow are restricted to shallow soils on the hilltops. In contrast, the deeper soils in the valley bottoms produce a more stable moisture regime than shallower soils, which tend to saturate and dry out quickly. These model results are in agreement with the spatial patterns of almond productivity: an asymptotic increase with soil thickness. Copyright © 2000 John Wiley & Sons, Ltd.     

Hydrological and erosional response to natural rainfall in a semi‐arid area of south‐east Spain

A better knowledge of soil erosion by water is essential for planning effective soil and water conservation practices in semi‐arid Mediterranean environments. The special climatic and hydrological characteristics of these areas, however, make accurate soil loss predictions difficult, particularly in the absence of minimal data. Two zero‐order experimental microcatchments (328–759 m²), representative of an extensive semi‐arid watershed with a high potential erosion risk in the south‐east of Spain, were selected and monitored for 3 years (1991–93) in order to provide information on the hydrological and erosional response. A pluviogram and hydrograph recorded data at 1‐min intervals during each storm, after which the soil loss was collected and the particle size of the sediment was analysed. Runoff coefficients of about 9% and soil losses of between 84·83 and 298·9 g m^?2 year^?1 were observed in the area. Rapid response times (geometric mean values lower than 2 h) and low runoff thresholds (mean values between 3·5 to 5·9 mm) were the norm in the experimental areas. A rain intensity of over 15 mm h^?1 was considered as ‘erosive rainfall’ in these areas because of the total soil loss and the transport capacity of the overland flow. Differences in pore‐size distribution explained the different hydrological responses observed between areas. The erosional response was more complex and basically seemed to be determined by soil aggregate stability and topographical properties. A greater proportion of finer particles in the eroded material than in the soil matrix indicated selective erosion and the transport of finer material. Copyright © 2001 John Wiley & Sons, Ltd.     

Evaluation of the hydrology of the IBIS land surface model in a semi‐arid catchment

This paper evaluates the Integrated BIosphere Simulator (IBIS) land surface model using daily soil moisture data over a 3‐year period (2005–2007) at a semi‐arid site in southeastern Australia, the Stanley catchment, using the Monte Carlo generalized likelihood uncertainty estimation (GLUE) approach. The model was satisfactorily calibrated for both the surface 30 cm and full profile 90 cm. However, full‐profile calibration was not as good as that for the surface, which results from some deficiencies in the evapotranspiration component in IBIS. Relatively small differences in simulated soil moisture were associated with large discrepancies in the predictions of surface runoff, drainage and evapotranspiration. We conclude that while land surface schemes may be effective at simulating heat fluxes, they may be ineffective for prediction of hydrology unless the soil moisture is accurately estimated. Sensitivity analyses indicated that the soil moisture simulations were most sensitive to soil parameters, and the wilting point was the most identifiable parameter. Significant interactions existed between three soils parameters: porosity, saturated hydraulic conductivity and Campbell ‘b’ exponent, so they could not be identified independent of each other. There were no significant differences in parameter sensitivity and interaction for different hydroclimatic years. Even though the data record contained a very dry year and another year with a very large rainfall event, this indicated that the soil model could be calibrated without the data needing to explore the extreme range of dry and wet conditions. IBIS was much less sensitive to vegetation parameters. The leaf area index (LAI) could affect the mean of daily soil moisture time series when LAI < 1, while the variance of the soil moisture time series was sensitive to LAI > 1. IBIS was insensitive to the Jackson rooting parameter, suggesting that the effect of the rooting depth distribution on predictions of hydrology was insignificant. Copyright © 2014 John Wiley & Sons, Ltd.     

River–aquifer interactions in a semi‐arid environment stressed by groundwater abstraction

Rivers and aquifers are, in many cases, a connected resource and as such the interactions between them need to be understood and quantified for the resource to be managed appropriately. The objective of this paper is to advance the understanding of river–aquifer interactions processes in semi‐arid environments stressed by groundwater abstraction. This is performed using data from a specific catchment where records of precipitation, evapotranspiration, river flow, groundwater levels and groundwater abstraction are analysed using basic statistics, hydrograph analysis and a simple mathematical model to determine the processes causing the spatial and temporal changes in river–aquifer interactions. This combined approach provides a novel but simple methodology to analyse river–aquifer interactions, which can be applied to catchments worldwide. The analysis revealed that the groundwater levels have declined (~ 3 m) since the onset of groundwater abstraction. The decline is predominantly due to the abstraction rather than climatic changes (r = 0.84 for the relationship between groundwater abstraction and groundwater levels; r = 0.92 for the relationship between decline in groundwater levels and magnitude of seasonal drawdown). It is then demonstrated that, since the onset of abstraction, the river has changed from being gaining to losing during low‐flow periods, defined as periods with flow less than 0.5, 1.0 or 1.5 GL/day (1 GL/day = 1 × 10⁶ m³/day). If defined as < 1.0 GL/day, low‐flow periods constitute approximately 65% of the river flows; the periods where the river is losing at low‐flow conditions are thus significant. Importantly, there was a significant delay (> 10 years) between the onset of groundwater abstraction and the changeover from gaining to losing conditions. Finally, a relationship between the groundwater gradient towards the river and the river flow at low‐flow is demonstrated. The results have important implications for water management as well as water ecology and quality. Copyright © 2012 John Wiley & Sons, Ltd.     

Soil moisture states,lateral flow,and streamflow generation in a semi‐arid,snowmelt‐driven catchment

Hydraulic connectivity on hillslopes and the existence of preferred soil moisture states in a catchment have important controls on runoff generation. In this study we investigate the relationships between soil moisture patterns, lateral hillslope flow, and streamflow generation in a semi‐arid, snowmelt‐driven catchment. We identify five soil moisture conditions that occur during a year and present a conceptual model based on field studies and computer simulations of how streamflow is generated with respect to the soil moisture conditions. The five soil moisture conditions are (1) a summer dry period, (2) a transitional fall wetting period, (3) a winter wet, low‐flux period, (4) a spring wet, high‐flux period, and (5) a transitional late‐spring drying period. Transitions between the periods are driven by changes in the water balance between rain, snow, snowmelt and evapotranspiration. Low rates of water input to the soil during the winter allow dry soil regions to persist at the soil–bedrock interface, which act as barriers to lateral flow. Once the dry‐soil flow barriers are wetted, whole‐slope hydraulic connectivity is established, lateral flow can occur, and upland soils are in direct connection with the near‐stream soil moisture. This whole‐slope connectivity can alter near‐stream hydraulics and modify the delivery of water, pressure, and solutes to the stream. Copyright © 2005 John Wiley & Sons, Ltd.     

Energy balance and evaporation loss of an agricultural reservoir in a semi‐arid climate (south‐eastern Spain)

A typical agricultural water reservoir (AWR) of 2400 m² area and 5 m depth, located in a semi‐arid area (southern Spain), was surveyed on a daily basis for 1 year. The annual evaporation flux was 102·7 W m^?2, equivalent to an evaporated water depth of 1310 mm year^?1. The heat storage rate G exhibited a clear annual cycle with a peak gain in April (G ～ 45 W m^?2) and a peak loss in November (G ～ 40 W m^?2), leading to a marked annual hysteretic trend when evaporation (λE) was related to net radiation (R_n). λE was strongly correlated with the available energy A, representing 91% of the annual AWR energy loss. The sensible heat flux H accounted for the remaining 9%, leading to an annual Bowen ratio in the order of 0·10. The equilibrium and advective evaporation terms of the Penman formula represented 76 and 24%, respectively, of the total evaporation, corresponding to a annual value of the Priestley–Taylor (P–T) coefficient (α) of 1·32. The P–T coefficient presented a clear seasonal pattern, with a minimum of 1·23 (July) and a maximum of 1·65 (December), indicating that, during periods of limited available energy, AWR evaporation increased above the potential evaporation as a result of the advection process. Overall, the results stressed that accurate prediction of monthly evaporation by means of the P–T formula requires accounting for both the annual cycle of storage and the advective component. Some alternative approaches to estimating R_n, G and α are proposed and discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Tunnel development over a 12 year period in a semi‐arid catchment of the Loess Plateau,China

The tunnel systems in a semi‐arid catchment of the Loess Plateau of China were repeatedly surveyed prior to the rainy seasons of 1989, 1999 and 2001. The surveys aimed to: (1) measure tunnel development over the 12 year period 1989–2001; (2) explore how the physiographical conditions affect the spatio‐temporal variability of tunnel development; and (3) to identify the geomorphic processes associated with tunnel development. The ultimate goal was to quantify the geomorphic significance of tunnel systems in the catchment. Over the 12 year period, the number of tunnel inlets was more than doubled and most of the newly increased inlets were initiated in the few catastrophic storm events. However, tunnel enlargement can occur in storm or inter‐storm periods, mainly through earth falls and slumps in inlets, and water erosion and roof cave‐in collapses in tunnel paths. Tunnel development varied with material properties, land uses and topographic conditions. Net tunnel erosion may contribute at least 25–30% of the catchment sediment yield and was mainly produced by the initiation and enlargement of tunnel inlets rather than tunnel paths. To protect the areas against tunnel erosion, terracing of the upper slopes seems to be more effective than planting vegetation on the lower slopes. Copyright © 2003 John Wiley & Sons, Ltd.     

Spatial patterns and temporal stability of soil moisture across a range of scales in a semi‐arid environment

The antecedent soil moisture status of a catchment is an important factor in hydrological modelling. Traditional Hortonian infiltration models assume that the initial moisture content is constant across the whole catchment, despite the fact that even in small catchments antecedent soil moisture exhibits tremendous spatial heterogeneity. Spatial patterns of soil water distribution across three transects (two in a burnt area and one in an unburnt area) in a semi‐arid area were studied. At the transect scale, when the factors affecting soil moisture were limited to topographical position or local topography, spatial patterns showed time stability, but when other factors, such as vegetation, were taken into account, the spatial patterns became time unstable. At the point scale, and in the same areas, topographical position was the main factor controlling time stability. Scale dependence of time stability was studied and local topography and vegetation presence were observed to play an important role for the correlation between consecutive measures depending on the scale. Copyright © 2000 John Wiley & Sons, Ltd.     

The application of caesium‐137 measurements to investigate floodplain deposition in a large semi‐arid catchment in Queensland,Australia: a low‐fallout environment

Floodplains comprise geomorphologically important sources and sinks for sediments and associated pollutants, yet the sedimentology of large dryland floodplains is not well understood. Processes occurring on such floodplains are often difficult to observe, and techniques used to investigate smaller perennial floodplains are often not practical in these environments. This study assesses the utility of ¹³⁷Cs inventory and depth‐profile techniques for determining relative amounts of floodplain sedimentation in the Fitzroy River, northeastern Australia; a 143 000 km² semi‐arid river system. Caesium‐137 inventories were calculated for floodplain and reference location bulk soil cores collected from four sites. Depth profiles of ¹³⁷Cs concentration from each floodplain site and a reference location were recorded. The areal density of ¹³⁷Cs at reference locations ranged from 13 to 978 Bq m^–2 (0–1367 Bq m^–2 at the 95% confidence interval), and the mean value ± 2 (standard error of the mean) was 436 ± 264 Bq m^–2, similar to published data from other Southern Hemisphere locations. Floodplain inventories ranged from 68 to 1142 Bq m^–2 (0–1692 Bq m^–2 at the 95% confidence interval), essentially falling within the range of reference inventory values, thus preventing calculation of erosion or deposition. Depth‐profiles of ¹³⁷Cs concentration indicate erosion at one site and over 66 cm of deposition at another since 1954. Analysis of ^239+240Pu concentrations in a depositional core substantiated the interpretation made from ¹³⁷Cs data, and depict a more tightly constrained peak in concentration. Average annual deposition rates range from 0 to 15 mm. The similarity between floodplain and reference bulk inventories does not necessarily indicate a lack of erosion or deposition, due to low ¹³⁷Cs fallout in the region and associated high measurement uncertainties, and a likely influence of gully and bank eroded sediments with no or limited adsorbed ¹³⁷Cs. In this low‐fallout environment, detailed depth‐profile data are necessary for investigating sedimentation using ¹³⁷Cs. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface water quality in a sulfide mineral‐rich arid zone in North‐Central Chile: Learning from a complex past,addressing an uncertain future

This study presents an analysis of up to 30 years of hydrological variables and selected water quality parameters (pH, SO₄, Fe, Cu, and As) in the upper area of the Elqui River basin in North‐Central Chile. A correlation analysis determined statistically significant positive relationship for SO₄‐Cu, Fe‐As, and Fe‐Cu. In terms of historical behaviour, no statistically significant trends were detected for precipitation or temperature. In contrast, for flow, there is an overall decreasing pattern for the entire area of study, although only in one case this trend was statistically significant. Along with the aforementioned analysis, a characterization of the flow‐water quality relationships is considered for the time period analyzed. Although erratic behaviours were confirmed, a negative (i.e., inverse) flow‐concentration relationship was identified for SO₄, a positive (i.e., direct) relationship for Fe, and undefined relationships for As and Cu were obtained. From these analyses and based on previous studies on projections regarding climate change for the Andean region, and in particular for the upper Elqui zone, an estimation of the possible effects of the change in water regimes on water quality in the area of study is developed. It is likely that a decrease in surface flow, as a consequence of climate change could translate into improvements in water quality in terms of Fe and eventually As and Cu, but into an impairment in the case of SO₄. In any case, this is a complex situation that demands special attention in the face of industrial activities that could be developed in tributaries like the Claro River, which currently play an important role in depurating or diluting contaminants in the waters of the Elqui River. Finally, it should be noted that this study addresses an issue that goes beyond the local interest and could be used as a reference to compare other transitional environments containing sulphide ores or areas of hydrothermal alterations, which are considered to be highly vulnerable to climate change and variability.     

Gully‐head erosion processes on a semi‐arid valley floor in Kenya: a case study into temporal variation and sediment budgeting

A three year monitoring programme of gully‐head retreat was established to assess the significance of sediment production in a drainage network that expanded rapidly by gully‐head erosion on the low‐angled alluvio‐lacustrine Njemps Flats in semi‐arid Baringo District, Kenya. This paper discusses the factors controlling the large observed spatial and temporal variation in gully‐head retreat rates, ranging from 0 to 15 m a^?1. The selected gullies differed in planform and in runoff‐contributing catchment area but soil material and land use were similar. The data were analysed at event and annual timescales. The results show that at annual timescale rainfall amount appears to be a good indicator of gully‐head retreat, while at storm‐event timescale rainfall distribution has to be taken into account. A model is proposed, including only rainfall (P) and the number of dry days (DD) between storms: which explains 56 per cent of the variation in retreat rate of the single‐headed gully of Lam1. A detailed sediment budget has been established for Lam1 and its runoff‐contributing area (RCA). By measuring sediment input from the RCA, the sediment output by channelized flow and linear retreat of the gully head for nine storms, it can be seen that erosion shifts between different components of the budget depending on the duration of the dry period (DD) between storms. Sediment input from the RCA was usually the largest component for the smaller storms. The erosion of the gully head occurred as a direct effect of runoff falling over the edge (GH_waterfall) and of the indirect destabilization of the adjacent walls by the waterfall erosion and by saturation (GH_mass/storage). The latter component (GH_mass/storage) was usually much larger that the former (GH_waterfall). The sediment output from the gully was strongly related to the runoff volume while the linear retreat, because of its complex behaviour, was not. Overall, the results show that the annual retreat is the optimal timescale to predict retreat patterns. More detailed knowledge about relevant processes and interactions is necessary if gully‐head erosion is to be included in event‐based soil erosion models. Copyright © 2001 John Wiley & Sons, Ltd.     

Multi‐phase evolution of gnammas (weathering pits) in a Holocene deglacial granite landscape,Minnesota (USA)

The morphometry of 85 gnammas (weathering pits) from Big Stone County in western Minnesota allows the assessment of the relative ages of the gnamma population. The ratio between maximum and minimum depths is independent of the initial size of the cavity and only depends on the weathering evolution. Therefore, the distribution of depth ratios can be used to assess the gnamma population age and the history of weathering. The asymmetrical distribution of depth ratios measured in Big Stone County forms three distinct populations. When these sets are analyzed independently, the correlation (r²) between maximum and minimum depths is greater than 0·95. Each single population has a normal distribution of depth ratios and the average depth ratios (δ‐value) for each population are δ₁ = 1·60 ± 0·05, δ₂ = 2·09 ± 0·04 and δ₃ = 2·42 ± 0·08. The initiation of gnamma formation followed the exhumation of the granite in the region. This granite was till and saprolite covered upon retreat of the ice from the Last Glacial Maximum. Nearby outcrops are striated, but the study site remained buried until it was exhumed by paleofloods issuing from a proglacial lake. These Holocene‐aged gnammas in western Minnesota were compared with gnammas of other ages from around the world. Our new results are in accordance with the hypothesis that δ‐values represent the evolution of gnammas with time under temperate‐ to cold‐climate dynamics. Phases of the formation of new gnammas may result from changes in weathering processes related to climate changes. Copyright © 2007 John Wiley & Sons, Ltd.     

Seepage response along an alluvial valley in a semi‐arid catchment in north‐central California

Over a period of 12 months, soil moisture content and potential was monitored in an annual‐grass‐dominated 20 ha catchment in order to determine flow paths leading to exfiltration at the catchment outlet. Water was found to enter the catchment valley either through flow originating in the slopes or through surface infiltration during rainfall events. Although subsurface flow from the slopes to the catchment outlet occurred throughout the year, surface recharge was restricted to a few events during the wet season. In the deeper saturated profile of the valley, flow was directed upwards along the valley edges and gradually became horizontal towards the central axis of the valley. During the peak of the rainfall season, horizontal flow close to the catchment outlet intercepted the gradually sloping surface, resulting in exfiltration. Plants influenced the hydrology of the catchment by removing moisture from the root zone during spring and early summer, resulting in evapotranspiration losses from the vadose zone. Heterogeneities within the valley soil were evident as variable‐permeability layers that resulted in a seasonally confined water table within the valley. This investigation shows that the vadose zone plays an important role in redistributing surface recharge and emphasizes the importance of accounting for effective moisture in low‐yielding catchments with ephemeral surface runoff. Copyright © 2002 John Wiley & Sons, Ltd.     

Transpiration from three dominant shrub species in a desert‐oasis ecotone of arid regions of Northwestern China

Conservation management for the water dependent desert‐oasis ecotone in arid northwest China requires information on the water use of the dominant species. However, no studies have quantified their combined water use or linked species composition to ecotone transpiration. Here, the water use of three dominant shelterbelt shrubs (Haloxylon ammodendron, Nitraria tangutorum, and Calligonum mongolicum) within an ecotone was measured throughout the full leaf‐out period for three shrub species from 30 May to 16 October 2014, with sap flow gauges using the stem heat balance approach. Species‐specific transpiration was estimated by scaling up sap flow velocities measured in individual stems, to stand area level, using the frequency distribution of stem diameter and assuming a constant proportionality between sap flow velocity and basal cross‐sectional area for all stems. The mean peak sap flux densities (J_sn) for H. ammodendron, N. tangutorum, and C. mongolicum, were 40.12 g cm^?2 h^?1, 71.33 g cm^?2 h^?1, and 60.34 g cm^?2 h^?1, respectively, and the mean estimated daily area‐averaged transpiration rates (T_daily) for the same species were 0.56 mm day^?1, 0.34 mm day^?1, and 0.11 mm day^?1. The accumulative stand transpiration was approximately 140.8 mm throughout the measurement period, exceeding precipitation by as much as 42.1 mm. Furthermore, T_daily of these shrubs appeared to be much less sensitive to soil moisture as compared to atmospheric drivers, and the relationship between J_sn and atmospheric drivers was likely uninfluenced by soil moisture regimes in the whole profile (to 1‐m depth), especially for H. ammodendron and C. mongolicum. Results indicate that these shrubs may use deep soil water recharged by capillary rise, or may directly access shallow groundwater. This study provides quantitative data offering important implications for ecotone conservation and water and land resource management. Copyright © 2016 John Wiley & Sons, Ltd.     

Thermal weathering of granite spheroidal boulders in a dry‐temperate climate,Northern Dobrogea,Romania

Weathering microforms associated with exfoliation were investigated on 40 granitic spheroidal boulders identified on Pricopan Ridge (M?cin Mountains) in order to establish a spatial distribution pattern. Continuous thermal monitoring allowed the frequency and intensity distribution assessment of short‐term temperature changes triggered by summer storms, of intense day–night amplitudes and frost cycles across a uniform rounded boulder. Rock strength estimated by Schmidt hammer tests differentiates a significantly weaker resistance on the southern face of the boulders (rebound values of 27 to 33) in comparison with the northern face (43–50). The lowest resistance of the north–south cross‐boulder profile corresponds to the southern gentle slopes (0°–45°) thus defining the most susceptible area to exfoliation and other weathering processes. It is argued that this low‐resistant sector fits well with the maximum frequency and intensity of thermal processes recorded on the low and mid slopes (0°–45°) of the boulders south side, with small differences from one process to another, whilst the sector of 20° to 30° south corresponds to the peak activity of all. In accordance, the overlay map of exfoliated surfaces places the high frequency area on a spherical cap developed similarly (between 5° north and 45° south). The smallest exfoliated surfaces normally appear around 30° south and are inferred to extend in time both to the boulder top and downslope. The correlations between the frequency/intensity maps of thermal processes and the frequency map of exfoliated surfaces point to a complementary action in the exfoliated surfaces development of the short‐term temperature changes and diurnal cooling and heating due to the directional insolation effect, as similarly inferred in the development of meridional cracks. Copyright © 2016 John Wiley & Sons, Ltd.