Airflow and aeolian sediment transport patterns within a coastal trough blowout during lateral wind conditions

Blowouts are depressions that occur on coastal dunes, deserts and grasslands. The absence of vegetation in blowouts permits high speed winds to entrain and remove sediment. Whereas much research has examined patterns of wind flow and sediment transport on the stoss slopes and lee of sand dunes, no study has yet investigated the connections between secondary air‐flow structures and sediment transport in a blowout where zones of streamline compression, expansion and steering are less clearly delineated. In this study we investigated the variability of sediment flux and its relation to near‐surface wind speed and turbulence within a trough blowout during wind flow that was oblique to the axis of the blowout. Wind flow was measured using six, three‐dimensional (3D) ultrasonic anemometers while sediment flux by eight sand traps, all operating at 25 Hz. Results demonstrated that sediment flux rates were highly variable throughout the blowout deflation basin, even over short distances (< 0.5 m). Where flow was steadiest, flux was greatest. Consequently the highest rates of sediment transport were recorded on the erosional wall crest where flow was compressed and accelerated. The strength of correlation between sediment flux and wind parameter improved with an increase in averaging interval, from 10 seconds to 1 minute. At an interval of 10 seconds, however, wind speed correlated best with flux at seven of eight traps, whereas at an interval of one minute Turbulent Kinetic Energy (TKE) provided the best correlation with flux at six of the eight traps. Correlation between sediment flux and wind parameters was best in the centre of the blowout and poorest on the erosional wall crest. The evidence from this paper suggests, for the first time, that TKE may be a better predictor of sediment transport at minute scale averaging intervals, particularly over landforms where wind flow is highly turbulent. Copyright © 2014 John Wiley & Sons, Ltd.     

Relationships between deflation and near surface wind velocity in a coastal dune blowout

Detailed field measurements were made of the degree of surface level change in a blowout, situated in the coastal dune area of Meijendel, The Netherlands. A formula was established to express the erosivity of the wind for the corresponding 34 measurement intervals, over a period of about 3 years. Having established, for 12 wind sectors, the relationship between wind velocity at the nearest standard weather station and at five locations in the blowout, correlations were derived between the deflation rate in the blowout and the wind erosivity using standard hourly wind data. The winter season, although the most windy, is by far the least effective season: the threshold shear wind velocity is disproportionally increased because the moisture content of the surface sand is high. The soil moisture conditions are described as a function of the daily precipitation and evaporation rate. The two most relevant upper and lower threshold shear wind velocities are determined empirically. During the summer season, deflation rate is even higher than indicated by the net surface level change because deflation is partly compensated by deposition of sand transported by rainwash from the blowout margin. With regard to spatial variation in the deflation rate within the blowout, it appears that locations with relatively high velocities coincide with higher deflation rates. However, the spatial variation is commonly less than is expected from the horizontal wind velocity distribution. In view of this the role of wind direction, blowout morphology and algal coverage of the soil in the deflation rate is discussed.     

Morphodynamics and climate controls of two aeolian blowouts on the northern Great Plains,Canada

Blowouts are the most regionally pervasive active aeolian landform on the northern Great Plains of North America. This study reports a long‐term investigation into the morphological development of two adjacent blowouts in a continental dune field. The blowouts were monitored for a decade in the Bigstick Sand Hills of southwestern Saskatchewan, Canada. Topographic changes were determined from dense arrays of erosion pins in each blowout (1 per 4 m², n = 171; and 1 per 16 m², n = 150). Pin measurements were made 16 times between May 1994 and May 2004. Over the decade both blowouts expanded and more than doubled in volume. Differences in form–flow interactions have caused the larger of the two blowouts to deposit more than a metre of sediment within the deflation basin, and the smaller blowout to erode by more than a metre. A negative feedback effect was triggered when the larger blowout reached a critical size around 1994 (60 m × 36 m × 8·1 m, length × width × height) when sediment was no longer eroded from the deflation basin. A positive feedback in the smaller blowout continues to facilitate erosion from the deflation basin. Monthly observations since 2002 indicate that aspect plays an important role in the development of these blowouts by creating a spatial asymmetry in sediment availability. Sediment is more readily available throughout the year on south‐facing slopes, which receive greater insolation than north‐facing slopes and are often drier and more frequently thawed in this cold‐climate environment. Comparisons between climate data from a remote meteorological station 45 km to the southwest and sediment transport indices developed from the erosion pin data produced very few correlations significant at the 95 per cent confidence level. Nevertheless, the signs of the correlation coefficients indicate that sediment erosion and deposition in both blowouts respond similarly to the following climate variables recorded at the remote station: (i) the amount of precipitation, (ii) the transport capacity of the wind and (iii) transporting winds from a directional wedge between 180 and 330°. Taken altogether, the results from this study highlight the importance of climate and feedback effects in blowout development that may be extended to other blowouts in continental and coastal settings. Copyright © 2006 John Wiley & Sons, Ltd.     

The influence of topography and approach angles on local deflections of airflow within a coastal blowout

The spatial variability of air flow through complex topography is an important, but not fully understood, component of dune development and dynamics. This study examines the spatial variability of the wind field in a linear blowout in coastal dunes at Jockey's Ridge State Park, on the Outer Banks of North Carolina. A spatial array of single‐height anemometers and wind vanes were placed within the blowout. Topography exerted a significant steering effect when onshore winds approached from directions within 50° of the blowout axis. Under those conditions wind flow in the blowout aligned to the axis regardless of approach angle, maximizing the potential for erosion and transport in the trough. In other locations aspect variations caused deflection both proportional and disproportional to changes in the approaching wind. When prevailing winds approached from directions more oblique than 50° to the blowout axis, topographic steering through the blowout trough was reduced and secondary flow generated by flow separation over the trough became more prominent. During those approach angles, wind directions and speeds within the upper blowout trough became erratic as vortices and turbulence dominated the flow, minimizing transport potential. The changing characteristics of airflow in the blowout relative to differing approach angles has implications on dune development and variations in transport potential under changing conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Topographic changes associated with coastal dune blowouts at island beach state park,New Jersey

Topographic changes in two blowouts located in Island Beach State Park, New Jersey, USA were monitored over the winter of 1981-1982. Elevation changes were measured with erosion pins, and sediment traps placed at comparable locations in each blowout monitored the amount of sand moved by the wind. Discrete wind events were identified from regional data, and morphological data for the intervals with the highest onshore and offshore wind speeds are examined in detail. Vegetation is the primary influence on the development of the two blowouts. Blowout A is characterized by eroding sidewalls, a stable base, and an accreting blowout rim. High rates of sediment transport occur through the blowout throat which results in accretion on the vegetated rim. This blowout is an active sediment transfer system. Vegetation causes a large amount of deposition in the throat of blowout B. As vegetation was buried over the winter, the area of deposition migrated inland. Sidewall erosion also occurred in blowout B. Little change was recorded on the blowout rim. Blowout B is a recovering system where sediment is delivered to the blowout floor from the beach by onshore winds and from the blowout rim by offshore winds where it is stabilized by vegetation. The development of foredune blowouts is governed largely by vegetation cover on the dune crest and by sidewall erosion during offshore and onshore winds. Blowout recovery depends on vegetation growth and sediment deposition in the throat, and on the role of the sidewalls as sources of sediment which is deposited elsewhere within the system. Foredune blowouts are dynamic systems in which positive feedbacks in sediment availability and vegetation growth lead to a cycle of development and closure.     

风应力桥梁作用下热带太平洋和热带大西洋相互作用的数值试验

利用中等复杂程度热带大气和海洋模式研究了热带太平洋和大西洋SST通过风应力桥梁的相互作用.利用1958～1998年NCEP分析的海表面温度场（SST）强迫大气模式得到的表面风应力与NCEP分析的同期热通量共同驱动海洋模式,作为控制试验;和控制试验平行,但强迫大气模式的SST在某一海盆取为多年气候平均值的试验作为敏感性试验;比较控制试验与敏感性试验模拟,则可反映风应力桥梁作用下热带某海盆SST异常对其他海盆的影响.结果表明,热带某一海盆SST暖（冷）异常总是引起局地海盆表面西部西（东）风异常和东部东（西）风异常;热带太平洋SST暖（冷）异常导致的该海盆东部表面东（西）风异常可以扩展到热带大西洋,从而导致热带大西洋SST冷（暖）异常;热带大西洋SST暖（冷）异常导致的该海盆西部表面西（东）风异常可以扩展到热带太平洋,从而导致热带太平洋SST暖（冷）异常.     

Topographic change and numerically modelled near surface wind flow in a bowl blowout

A number of studies have measured and numerically modelled near surface wind velocity over a range of aeolian landforms and made suppositions about topographic change and landform evolution. However, the precise measurement and correlation of flow dynamics and resulting topographic change have not yet been fully realized. Here, using repeated high-resolution terrestrial laser scanning and numerical flow modelling within a bowl blowout, we statistically analyse the relationship between wind speed, vertical wind velocity, turbulent kinetic energy and topographic change over a 33-day period. Topographic results showed that erosion and deposition occurred in distinct regions within the blowout. Deposition occurred in the upwind third of the deflation basin, where wind flow became separated and velocity and turbulent kinetic energy decreased, and erosion occurred in the downwind third of the deflation basin, where wind flow reattached and aligned with incident wind direction. Statistical analysis of wind flow and topographic change indicated that wind speed had a strong correlation with overall topographic change and that vertical wind velocity (including both positive and negative) displayed a strong correlation with negative topographic change (erosion). Only weak or very weak correlations exist for wind flow parameters and positive topographic change (accretion). This study demonstrates that wind flow modelling using average incident wind conditions can be utilized successfully to identify regions of overall change and erosion for a complex aeolian landform, but not to identify and predict regions where solely accretion will occur. © 2019 John Wiley & Sons, Ltd.     

Holocene yardangs in volcanic terrains in the southern Andes,Argentina

Yardangs of different sizes were developed in the Payun Matru Volcanic Field, a semiarid area east of the southern Andes mountains. Yardangs from volcanic terrains have not been described previously from Earth, although studies from Mars interpreted linear ridges found by Mariner and Viking images as yardangs. The Payun Matru Volcanic Field is an extensive plateau at 2000 m a.s.l. covered by basaltic lava and ignimbrite flows. Strong westerly winds affect the extensive plateau. Micro‐ and mesoyardangs are formed on the ignimbrite rock blanket, and macroforms or megayardangs, several kilometres in length, are developed in the basaltic lava flows as long parallel troughs. They all have a distinctive 320° azimuth, which is the prevailing wind direction. No yardang features are noted in the more recent lava flows, younger than 1000 years, indicating that their formation needed a longer time or they developed in earlier periods with stronger winds. The yardang development is explained by the strong unidirectional winds, the poor vegetational cover due to the aridity of the region, the available quartz sand and volcanic ash particles as abrasive agents, and the volcanic lithology texture and flow structure. Copyright © 2001 John Wiley & Sons, Ltd.     

Influence of topography on wind speed over a coastal dune and blowout system at Jockey's Ridge,NC, USA

This study examines the spatial distribution of wind speed across a coastal dune system located at Jockey's Ridge State Park, North Carolina. The study area consists of a trough blowout through a foredune ridge, and the landforms that have developed behind the foredune. Wind speed and direction were measured simultaneously with single sensors placed at a fixed height in 13 locations across the blowout/dune complex. Fractional wind speed‐up is computed for sampling stations using data from a mast located on the beach as the reference. Results show that wind speeds were generally accelerated across the study site. The highest speeds were recorded on the foredune ridges adjacent to the blowout. Wind was accelerated through the center of the blowout throat and along the downwind lateral wall. Further into the blowout, at the base of the ramp to the depositional lobe, higher wind speeds shifted to the upwind lateral wall and continued to accelerate up the ramp as air exited to the rear. Significant variations in the wind speed‐up pattern were associated with different wind approach angles, with greater speed‐up occurring when the winds were aligned normal to the dune system. The speed‐up decreased as the angle of approach became increasingly oblique to the ridge. The patterns of wind speed‐up across the site point to the influence of topography on airflow. To quantify the relationship, measures of several topographic variables were obtained along sample transects running upwind from each sample station along flow lines representing different wind approach angles. Examination of correlation coefficients between wind speed‐up and topographic variables suggests that for groups of stations with similar topographic characteristics, 30–50% of the variations in speed‐up may be explained by the upwind topographic variability. Copyright © 2014 John Wiley & Sons, Ltd.     

Monitoring surface change on a Namib linear dune

In tackling the apparently intractable problem of linear dune initiation and maintenance there has been a move away from large-scale deductive models to smaller-scale field studies of individual dunes. This paper reports a study of surface change on a large, complex linear dune in the Namib Desert, southern Africa. The dune surface responds to a markedly seasonal wind regime. In summer westerly winds erode sand from the west flank of the dune and deposit it on the easterly lee side of the dune crest. In winter this pattern is reversed. Easterly winds erode sand from the east slope and deposit it on the west slope. The crest therefore moves back and forth some 15 m each year returning at the end of a year's cycle to its position at the beginning. The position of the base of the dune appears to remain fixed, even though sand is moving throughout the dune system. The dune does extend northward along some resultant of the westerly and easterly winds. Despite relatively high levels of activity, especially at the dune crest, there is no evidence of the breakdown of the linear dune form. The conclusion must therefore be that linear dunes can be maintained in bimodal wind regimes and are not necessarily related to unidirectional parallel regimes as others have suggested.     

Wind tunnel tests of the dynamic processes that control wind erosion of a sand bed

Aeolian sand transport is a complicated process that is affected by many factors (e.g. wind velocity, sand particle size, surface microtopography). Under different experimental conditions, erosion processes will therefore produce different results. In this study, we conducted a series of wind tunnel experiments across a range of wind velocities capable of entraining sand particles (8.0, 10.0, 12.0, and 14.0 m s^-1) to study the dynamic changes of the shear velocity, aerodynamic roughness length, and sand transport. We found that the shear velocity and aerodynamic roughness length are not constant; rather, they change dynamically over time, and the rules that describe their changes depend on the free-stream air velocity. For wind tunnel experiments without feeding sand into the airflow, the sand bed elevation decreases with increasing erosion time, and this change significantly affected the values of shear velocity and aerodynamic roughness length. A Gaussian distribution function described the relationships between the sand transport rate (q_T) and the duration of wind erosion (T). It is therefore necessary for modelers to consider both deflation of the bed and the time scale used when calculating sand transport or erosion rates. © 2018 John Wiley & Sons, Ltd.     

Winds and sand movements in the Namib Sand Sea

Wind regimes in the vicinity of the Namib Sand Sea are high energy unimodal near the coast, becoming bimodal or complex inland. There is an overall decrease in wind energy and sand transport rates from south to north and west to east, such that sand moves from coastal and southern source areas to accumulate in the northern and central parts of the sand sea. Such a pattern can explain much of the observed spatial variability in dune types, sizes, and sediment characteristics and lends support to a climatic model of sand sea formation in this region. Seasonal and daily cycles of wind velocity and direction give rise to episodic sand transport, most of which is generated by winds of moderate velocity and frequency.     

Sand detachment by wind‐driven raindrops

Wind movement and velocity can have a profound effect on some aspects of the soil erosion process. In the case of wind‐driven rain, differences in raindrop trajectory are expected: wind‐driven raindrops achieve some degree of horizontal velocity, which increases their resultant impact velocity and they strike the soil surface at an angle deviated from the vertical under the effects of both gravitational and drag forces. However, not much is known about the physical impact of raindrops on a soil in situations where this impact is at an angle, and it is also not precise known if oblique raindrops have stronger erosive effects than vertical ones. A series of tests was conducted to assess the effect of wind velocities on sand detachment from splash cups in a wind tunnel facility equipped with a rainfall simulator. Splash cups packed with standard sand were exposed to windless rains and to rains driven by horizontal wind velocities of 6, 10 and 14 m s^?1 to evaluate the sand detachment by wind‐driven raindrops. The average angle of rain inclination from vertical was calculated from the direct intensity measurements implemented with windward and leeward‐facing raingauges placed at different slopes. A kinetic energy sensor measured energy of windless and wind‐driven rains. Results showed that the kinetic energy flux calculated by the resultant impact velocity of drops adequately described the sand detachment from the splash cups by wind‐driven raindrops. However, an additional analysis of Pearson correlation coefficients using the velocity components rather than the resultant velocity of wind‐driven raindrops indicated that the energy flux related to the horizontal component of wind‐driven raindrops had a greater correlation with sand detachment than that related to the normal component. This finding contradicted the general assumption that the component of velocity normal to the surface is related to the detachment. Copyright © 2005 John Wiley & Sons, Ltd.     

Recent ventifact development on the central Oregon coast,western USA

The unusual location of ventifacts, on a boulder‐built jetty at the mouth of the Siuslaw River, Oregon coast, western USA, allows ventifact age and wind abrasion rates to be estimated with some precision. The jetty was built mainly between 1892–1901 and extended throughout the twentieth century. Consideration of historical shoreline position and the history of jetty construction and repair suggests the ventifacts have formed since about 1930. Morphologically the ventifacts are aligned south‐to‐north reflecting winter winds and sediment transport from the adjacent beach. Wind‐parallel grooves and ridges with sharp, sinuous crests are developed on inclined boulder surfaces on top of the jetty and reflect suspended sand transport in wind vortices. Deeply pitted surfaces on steep boulder surfaces nearest the beach reflect impact by saltating sand grains. Based on present wind regimes (1992–2000) from three regional weather stations, southerly winds above the sand transport threshold occur for 21·9–29·6 per cent of the time. Based on estimated depth of loss from boulder surfaces, wind abrasion rates are calculated to be on the order of 0·24–1·63 mm a^?1. This is the first well‐constrained field estimate of ventifact age and ventifaction rate from a modern coastal environment. Copyright © 2003 John Wiley & Sons, Ltd.     

Effects of aspect on weathering: anomalous behaviour of sandstone gravestones in southeast England

Rocks in the humid temperate zone tend to weather more severely on faces exposed to the prevailing winds than on their more sheltered leeward faces. In southeast England, however, gravestones composed of a non‐local, quartz‐rich sandstone exhibit a reverse weathering pattern. The east‐facing, lee sides exhibit a much greater depth and areal extent of weathering than the west sides which face the westerly wind and rain. Possible reasons for the asymmetric pattern of weathering are discussed. Copyright © 2000 John Wiley & Sons, Ltd.     

Aeolian sediment transport on a human‐altered foredune

Changes in wind speed and sediment transport are evaluated at a gap and adjacent crest of a 2 to 3 m high, 40 m wide foredune built by sand fences and vegetation plantings on a wide, nourished fine sand beach at Ocean City, New Jersey. Anemometer masts, cylindrical sand traps and erosion pins were placed on the beach and dune during two obliquely onshore wind events in February and March 2003. Results reveal that: (1) changes in the alongshore continuity of the beach and dune system can act as boundaries to aeolian transport when winds blow at an angle to the shoreline; (2) oblique winds blowing across poorly vegetated patches in the dune increase the potential for creating an irregular crest elevation; (3) transport rates and deflation rates can be greater within the foredune than on the beach, if the dune surface is poorly vegetated and the beach has not had time to dry following tidal inundation; (4) frozen ground does not prevent surface deflation; and (5) remnant sand fences and fresh storm wrack have great local but temporary effect on transport rates. Temporal and spatial differences due to sand fences and wrack, changes in sediment availability due to time‐dependent differences in surface moisture and frozen ground, combined with complex topography and patchy vegetation make it difficult to specify cause–effect relationships. Effects of individual roughness elements on the beach and dune on wind flow and sediment transport can be quantified at specific locations at the event scale, but extrapolation of each event to longer temporal and spatial scales remains qualitative. Copyright © 2006 John Wiley & Sons, Ltd.     

Dry aeolian dust accumulation in rocky deserts: ­a medium‐term field experiment based on short‐term wind tunnel simulations

The spatial pattern of medium‐term (a few months) dry aeolian dust accumulation in rocky deserts is predicted using short‐term deposition and erosion experiments in a wind tunnel. The predictions are tested in a field experiment set up in the northern Negev Desert of Israel. The results show that superimposing wind tunnel deposition and erosion maps usually leads to correct predictions of medium‐term dust accumulation. The predictions are somewhat less confident near the inflection lines of windward hillslopes, where small‐scale irregularities in the local topography make it difficult to locate the exact position of the areas of little accumulation. Elsewhere in the topography predictions are good, and the method works satisfactorily. Highest accumulation occurs on concave windward slopes and, to a lesser extent, on slopes parallel to the wind. Little accumulation occurs on the convex windward slopes and in dust separation bubbles. The smallest accumulation rates are observed immediately upwind of the top of pronounced hills and on leeslopes. The rate of dry dust accumulation measured during the field experiment varied from 17 to 93 g m⁻² a⁻¹, depending on the topographic position of the accumulation plots. For most plots, it was of the order of 30–60 g m⁻² a⁻¹. Copyright © 2000 John Wiley & Sons, Ltd.     

Volcanic sands of Iceland ‐ Diverse origins of aeolian sand deposits revealed at Dyngjusandur and Lambahraun

The origin, formation and evolution of volcanic sands are less well known than the formation of the much more common quartz‐rich sand sheets. Combining active volcanism and a cold climate, Iceland is covered for about 21% of its surface by sandy areas. The sands were analyzed in detail at two sites and results reveal their diverse origins. The first site is Dyngjusandur, located north of Vatnajökull, and the second site is the Lambahraun area, located south of Langjökull. At both sites, the sand origin is determined from field observations (wind directions from ventifacts), chemical and mineralogical analyses of rocks and sands. At Dyngjusandur, the sand is dominated by glass grains, a situation typical of sand plains in Iceland. Hyaloclastite ridges presently buried beneath Vatnajökull are the dominant source of the sand, and only large size plagioclase crystals (0.5 cm) in sands seem to be derived from the lava flows. Hyaloclastite ridges were crushed by glaciers and mechanically eroded sediments were washed out by melt‐water onto flood plains. The sand chemical composition is spatially homogeneous and similar to the average composition of neighboring sub‐aerial lava flows, reflecting efficient mixing of distinct sources below the glacier. The presence of sand north of Dyngjujökull can be taken as a way to explore the average chemical composition of non‐exposed volcanic material beneath the glacier. In the case of Lambahraun, prevailing winds indicate several potential sources of sand at the north of the sand sheet. Comparison of chemical and mineralogical analyses of sands and rock samples helped to refine the exact origin. In contrast with the first site, the sand is dominated by crystals and is chemically consistent with a mixture of material derived from the lava flows of Eldborgir and Skersli shield volcanoes. Analysis of the contact between the lava flows and the glacier reveals that basaltic sand grains formed as the result of recent advances of the glacier abrading the rocks. The direct interaction of glacial and fluvio‐glacial activity with basaltic plains appears to be necessary to produce a large amount of sands in a relatively short period of time (<4000 years). This site appears to be an excellent natural laboratory for further studies concerning the sand evolution and physical sorting processes in basaltic material, which have important implications for understanding aeolian processes on Mars. Copyright © 2011 John Wiley & Sons, Ltd.     

A simulation model of blowout development

Blowouts are the main feature of wind erosion in the dunes along the Dutch coast. A number of characteristics, such as their growth against the prevailing wind and the spontaneous stabilization when certain dimensions are reached, are believed to be caused by a prominent quality of the southwest wind, viz. its gustiness. This hypothesis is tested in a two-dimensional computer model which simulates the effect of wind gusts on a sandy surface along the main axis of the blowout. A number of constraints based on field observations are built into the model. The results closely resemble the longitudinal section of the blowout.