Influence of glacier advance on the development of the multipart Riffeltal rock glacier,Central Austrian Alps

The multipart Riffeltal rock glacier, located in a tributary valley of the Kaunertal, Tyrol, Austria is investigated to enlarge the knowledge about spatial and temporal development of rock glaciers in and at the margins of pro‐glacial areas and to get a better understanding of glacier–rock glacier interactions. The subject of interest consists of a complex system of two adjacent rock glacier tongues and various superposed lobes with differing ages, origin and root zones, and therefore diverse development. To determine the reasons for their diverging development, the internal structure and permafrost occurrence on and in the surrounding area of the rock glacier were studied by application of geomorphological mapping, geophysical methods and measurement of the basal temperature of the winter snow cover (BTS). Permafrost modelling was performed on the basis of BTS data and land surface parameters derived from a high resolution airborne laser scanning (ALS) digital elevation model (DEM). Additionally, the ALS data were used to measure vertical and horizontal changes of the rock glacier surface between 2006 and 2012. Glacier–rock glacier interactions during and since the Little Ice Age (LIA) are evident for the development of the studied rock glacier. A geomorphic map gives important information about the connection between glacial advance or retreat and permafrost or ground ice occurrence. The combination of all information helps in the analysis of diverse kinematic action of neighbouring rock glacier tongues. Copyright © 2014 John Wiley & Sons, Ltd.     

Defining and measuring braiding intensity

Geomorphological studies of braided rivers still lack a consistent measurement of the complexity of the braided pattern. Several simple indices have been proposed and two (channel count and total sinuosity) are the most commonly applied. For none of these indices has there been an assessment of the sampling requirements and there has been no systematic study of the equivalence of the indices to each other and their sensitivity to river stage. Resolution of these issues is essential for progress in studies of braided morphology and dynamics at the scale of the channel network. A series of experiments was run using small‐scale physical models of braided rivers in a 3 m ∞ 20 m flume. Sampling criteria for braid indices and their comparability were assessed using constant‐discharge experiments. Sample hydrographs were run to assess the effect of flow variability. Reach lengths of at least 10 times the average wetted width are needed to measure braid indices with precision of the order of 20% of the mean. Inherent variability in channel pattern makes it difficult to achieve greater precision. Channel count indices need a minimum of 10 cross‐sections spaced no further apart than the average wetted width of the river. Several of the braid indices, including total sinuosity, give very similar numerical values but they differ substantially from channel‐count index values. Consequently, functional relationships between channel pattern and, for example, discharge, are sensitive to the choice of braid index. Braid indices are sensitive to river stage and the highest values typically occur below peak flows of a diurnal (melt‐water) hydrograph in pro‐glacial rivers. There is no general relationship with stage that would allow data from rivers at different relative stage to be compared. At present, channel count indices give the best combination of rapid measurement, precision, and range of sources from which measurements can be reliably made. They can also be related directly to bar theory for braided pattern development. Copyright © 2008 John Wiley & Sons, Ltd.     

A multi‐dimensional analysis of pro‐glacial landscape change at Sólheimajökull,southern Iceland

Pro‐glacial landscapes are some of the most active on Earth. Previous studies of pro‐glacial landscape change have often been restricted to considering either sedimentological, geomorphological or topographic parameters in isolation and are often mono‐dimensional. This study utilized field surveys and digital elevation model (DEM) analyses to quantify planform, elevation and volumetric pro‐glacial landscape change at Sólheimajökull in southern Iceland for multiple time periods spanning from 1960 to 2010. As expected, the most intense geomorphological changes persistently occurred in the ice‐proximal area. During 1960 to 1996 the pro‐glacial river was relatively stable. However, after 2001 braiding intensity was higher, channel slope shallower and there was a shift from overall incision to aggradation. Attributing these pro‐glacial river channel changes to the 1999 jökulhlaup is ambiguous because it coincided with a switch from a period of glacier advance to that of glacier retreat. Furthermore, glacier retreat (of ~40 m yr^?1) coincided with ice‐marginal lake development and these two factors have both altered the pro‐glacial river channel head elevation. From 2001 to 2010 progressive increase in channel braiding and progressive downstream incision occurred; these together probably reflecting stream power due to increased glacier ablation and reduced sediment supply due to trapping of sediment by the developing ice‐marginal lake. Overall, this study highlights rapid spatiotemporal pro‐glacial landscape reactions to changes in glacial meltwater runoff regimes, glacier terminus position, sediment supply and episodic events such as jökuhlaups. Recognizing the interplay of these controlling factors on pro‐glacial landscapes will be important for understanding the geological record and for landscape stability assessments. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparison and validation of MODIS standard and new combination of Terra and Aqua snow cover products in northern Xinjiang,China

Taking northern Xinjiang, China, as an example, this study first compares the standard MODIS Terra and Aqua snow cover classifications, and then compares the accuracy of the standard MODIS daily and 8‐day snow cover products with the new daily and multi‐day snow cover combination of MODIS Terra and Aqua observations using in situ measurements. Under clear sky in both products, the agreement of land classification from MODIS Terra and Aqua daily and 8‐day snow cover products is close to 100% for a entire water year. In contrast, the agreement of snow classification from MODIS Terra and Aqua is high only in the winter months, decreasing in the rest of the period. The high agreement mainly concentrates in land or snow‐dominated areas, and major disagreements take place in the transitions zones from snow to land. The disagreement (mainly snow–land) in the 8‐day products is higher than that in the daily products. In addition, both MODIS Terra and Aqua cloud masks tend to map more areas in the transition zones as cloud. Under clear sky conditions, the three daily products have similar accuracy of snow and land classification, and the 8‐day standard products and the multi‐day combination product also have similar accuracy of snow and land classification. This further suggests that the algorithm in the combination of Terra and Aqua snow cover products is valid. Moreover, in the actual weather/cloud conditions, the combination products from Terra and Aqua reduce cloud blockage and improve snow classification accuracy against either MODIS Terra or Aqua (51% against 44% and 34% for daily and 92% against 87% and 78% for 8‐day, respectively), although Terra snow product (daily or 8‐day) has slightly better accuracy than the Aqua snow product. The new combination products can provide better mapping of spatiotemporal variation of snow cover/glacier and for snow‐melting modeling. Copyright © 2008 John Wiley & Sons, Ltd.     

Long‐range terrestrial laser scanning for geomorphological change detection in alpine terrain – handling uncertainties

Long‐range terrestrial laser scanning (TLS) is an emerging method for the monitoring of alpine slopes in the vicinity of infrastructure. Nevertheless, deformation monitoring of alpine natural terrain is difficult and becomes even more challenging with larger scan distances. In this study we present approaches for the handling of spatially variable measurement uncertainties in the context of geomorphological change detection using multi‐temporal data sets. A robust distance measurement is developed, which deals with surface roughness and areas of lower point densities. The level of detection (LOD), i.e. the threshold distinguishing between real surface change and data noise, is based on a confidence interval considering the spatial variability of TLS errors caused by large laser footprints, low incidence angles and surface roughness. Spatially variable positional uncertainties are modelled for each point according to its range and the object geometry hit. The local point cloud roughness is estimated in the distance calculation process from the variance of least‐squares fitted planes. Distance calculation and LOD assessment are applied in two study areas in the Eastern Alps (Austria) using multi‐temporal laser scanning data sets of slopes surrounding reservoir lakes. At Finstertal, two TLS point clouds of high alpine terrain and scanned from ranges between 300 and 1800 m are compared. At Gepatsch, the comparison is done between an airborne laser scanning (ALS) and a TLS point cloud of a vegetated mountain slope scanned from ranges between 600 and 3600 m. Although these data sets feature different conditions regarding the scan setup and the surface conditions, the presented approach makes it possible to reliably analyse the geomorphological activity. This includes the automatic detection of rock glacier movement, rockfall and debris slides, even in areas where a difference in vegetation cover could be observed. Copyright © 2016 John Wiley & Sons, Ltd.     

Retreating ice: research in pro‐glacial areas matters

Glacier forefields are landscapes in transition from glacial to non‐glacial conditions; this implies intense geomorphic, hydrological and ecological dynamics with important on‐ and off‐site effects. This special issue collects 13 papers covering recent research in both (sub‐)polar and alpine pro‐glacial environments that focus on (i) pro‐glacial sediment sources, (ii) pro‐glacial rivers, (iii) pro‐glacial lakes, (iv) ground water and ice, and (v) the development of soil and vegetation in its interplay with morphodynamics. Advances in mapping, surveying and geophysical techniques form the basis for research perspectives related to the historical evolution of pro‐glacial areas, the understanding of complex interactions of multiple processes, and the effects of continued glacier recession. Copyright © 2015 John Wiley & Sons, Ltd.     

Hydrograph separation and precipitation source identification using stable water isotopes and conductivity: River Ganga at Himalayan foothills

The observed retreat of several Himalayan glaciers and snow packs is a cause of concern for the huge population in southern Asia that is dependent on the glacial‐fed rivers emanating from Himalayas. There is considerable uncertainty about how cryospheric recession in the Himalayan region will respond to climate change, and how the water resource availability will be affected. As a first step towards quantifying the contribution of glacier‐melt water, hydrograph separation of River Ganga at Rishikesh into its constituent components, namely (i) surface runoff, (ii) glacial ice‐melt and (iii) groundwater discharge has been done in this paper. A three‐component mixing model has been employed using the values of δ¹⁸O and electrical conductivity (EC) of the river water, and its constituents, to estimate the time‐varying relative fraction of each component. The relative fraction of the surface runoff peaks (70–90%) during winter, due to the near‐zero contribution of glacial ice‐melt, essentially represents the melting of surface snow from the catchment. The contribution of glacial ice‐melt to the stream discharge peaks during summer and monsoon reaches a maximum value of ～40% with an average of 32%. The fraction of groundwater discharge varies within a narrow range (15 ± 5%) throughout the year. On the basis of the variation in the d‐excess values of river water, it is also suggested that the snow‐melt and ice‐melt component has a significant fraction derived from winter precipitation with moisture source from mid‐latitude westerlies (also known as western disturbances). Copyright © 2010 John Wiley & Sons, Ltd.     

Active width of gravel‐bed braided rivers

Previous analyses have identified the active width of braided rivers, the bed area over which bed load flux and short‐term morphological change occurs, as an important element of braiding dynamics and predictions of bed load flux. Here we compare theoretical predictions of active width in gravel‐bed braided rivers with observations from Sunwapta River, and from a generic physical model of gravel braided rivers, to provide general observations of the variation in active width, and to develop an understanding of the causes of variation. Bed topography was surveyed daily along a 150 m reach of the pro‐glacial Sunwapta River for a total of four weeks during summer when flow was above threshold for morphological activity. In the laboratory, detailed digital elevation models (DEMs) were derived from photogrammetric survey at regular intervals during a constant discharge run. From the field and flume observations there is considerable local and circumstantial variation in active width, but also a general trend in average active width with increasing discharge. There is also a clear relationship of active width with active braiding index (number of active branches in the braided channel network), and with dimensionless stream power, which appears to be consistent across the range of data from field and physical models. Thus there is a link between active width and the river morphology and dynamics, and the possibility of a general relationship for estimating active width from channel pattern properties or reach‐scale stream power values, from which approximate bedload flux calculations may be made. The analysis also raises questions about differences between hydraulically‐based numerical model computations of instantaneous active width and observation of time‐integrated morphological active width. Understanding these differences can give insight into the nature of bedload transport in braided rivers and the relationship to morphological processes of braiding. Copyright © 2011 John Wiley & Sons, Ltd.     

Hydraulic visibility: Using satellite altimetry to parameterize a hydraulic model of an ungauged reach of a braided river

What hydraulic information can be gained from remotely sensed observations of a river's surface? In this study, we analyze the relationship between river bed undulations and water surfaces for an ungauged reach of the Xingu River, a first‐order tributary of the Amazon river. This braided reach is crosscut more than 10 times by a ENVISAT (ENVironmental SATellite) track that extends over 100 km. Rating curves based on a modeled discharge series and altimetric measurements are used, including the zero‐flow depth Z ₀ parameter, which describes river's bathymetry. River widths are determined from JERS (Japanese Earth Ressources Satellite) images. Hydrodynamic laws predict that irregularities in the geometry of a river bed produce spatial and temporal variations in the water level, as well as in its slope. Observation of these changes is a goal of the Surface Water and Ocean Topography satellite mission, which has a final objective of determining river discharge. First, the concept of hydraulic visibility is introduced, and the seasonality of water surface slope is highlighted along with different flow regimes and reach behaviors. Then, we propose a new single‐thread effective hydraulic approach for modeling braided rivers flows, based on the observation scales of current satellite altimetry. The effective hydraulic model is able to reproduce water surface elevations derived by satellite altimetry, and it shows that hydrodynamical signatures are more visible in areas where the river bed morphology varies significantly and for reaches with strong downstream control. The results of this study suggest that longitudinal variations of the slope might be an interesting criteria for the analysis of river segmentation into elementary reaches for the Surface Water Ocean Topography mission that will provide continuous measurements of the water surface elevations, the slopes, and the reach widths.     

Landscape controls on long‐term runoff in subhumid heterogeneous Boreal Plains catchments

We compared median runoff (R) and precipitation (P) relationships over 25 years from 20 mesoscale (50 to 5,000 km²) catchments on the Boreal Plains, Alberta, Canada, to understand controls on water sink and source dynamics in water‐limited, low‐relief northern environments. Long‐term catchment R and runoff efficiency (RP^?1) were low and varied spatially by over an order of magnitude (3 to 119 mm/year, 1 to 27%). Intercatchment differences were not associated with small variations in climate. The partitioning of P into evapotranspiration (ET) and R instead reflected the interplay between underlying glacial deposit texture, overlying soil‐vegetation land cover, and regional slope. Correlation and principal component analyses results show that peatland‐swamp wetlands were the major source areas of water. The lowest estimates of median annual catchment ET (321 to 395 mm) and greatest R (60 to 119 mm, 13 to 27% of P) were observed in low‐relief, peatland‐swamp dominated catchments, within both fine‐textured clay‐plain and coarse‐textured glacial deposits. In contrast, open‐water wetlands and deciduous‐mixedwood forest land covers acted as water sinks, and less catchment R was observed with increases in proportional coverage of these land covers. In catchments dominated by hummocky moraines, long‐term runoff was restricted to 10 mm/year, or 2% of P. This reflects the poor surface‐drainage networks and slightly greater regional slope of the fine‐textured glacial deposit, coupled with the large soil‐water and depression storage and higher actual ET of associated shallow open‐water marsh wetland and deciduous‐forest land covers. This intercatchment study enhances current conceptual frameworks for predicting water yield in the Boreal Plains based on the sink and source functions of glacial landforms and soil‐vegetation land covers. It offers the capability within this hydro‐geoclimatic region to design reclaimed catchments with desired hydrological functionality and associated tolerances to climate or land‐use changes and inform land management decisions based on effective catchment‐scale conceptual understanding.     

Morphodynamic research challenges for braided river environments: Lessons from the iconic case of New Zealand

Pressures on braided river systems in New Zealand are increasing due to anthropogenic stresses such as demand for irrigation water, braidplain conversion to farmland and invasive vegetation, as well as extreme natural events associated with earthquakes and climate change. These pressures create issues around preserving braided river physical environments and associated ecosystems, and managing hazards such as floods, aggradation and erosion. A need for more robust understanding and quantification of braided river morphodynamic processes underpins many of these issues. Here, we present eight morphodynamic research challenges to service this need. The first four research challenges relate to managing aggradation-related flooding hazards; the last four address issues stem largely from recent dairy expansion, which has created huge pressure to take land and irrigation water from the alp-fed braided rivers and to alter flow regimes at their mouths. Hāpua, the freshwater lagoons found where most braided rivers meet the coast, show complex morphodynamic behaviour in response to the interplay of river and coastal processes, and their special ecosystems are sensitive to river flow and sediment load changes. We discuss how physical laboratory experiments and novel numerical modelling can help to understand the morphological processes braided rivers undergo, and we show how those research advances could inform planning and legal decisions to regulate land rights and irrigation water allocation on New Zealand's braidplains. We illustrate these environmental and engineering issues and research challenges with examples from the Kowhai, Waiho, Waiau, Rangitata and Hurunui Rivers. © 2020 John Wiley & Sons, Ltd.     

Aerial Orthophoto and Airborne Laser Scanning as Monitoring Tools for Land Cover Dynamics: A Case Study from the Milicz Forest District (Poland)

The paper presents the results from the study concerning the application of airborne laser scanning (ALS) data and derived raster products like the digital surface model (DSM) and the digital terrain model (DTM) for the assessment of the degree of change of the land use based on the forest succession example. Simultaneously, an automated method of ALS data processing was developed based on the normalized (nDSM) and cadastral GIS information. Besides delivering precise information on forest succession, ALS technology is an excellent tool for time-changes spatial analyses. Usage of the ALS data can support the image interpretation process decreasing the subjectivity of the operator. In parallel, a manual vectorization and object classification (object-based image analysis—OBIA) were performed; both based on aerial orthophoto and ALS data. By using integrated ALS point clouds and digital aerial images, one can obtain fast OBIA processing and the determination of areas where the land cover has changed. The Milicz District (central west part of Poland) was chosen as the test site where ALS was to be performed in 2007, together with the digital aerial photos (Vexcel camera; pixel 0.15 m; CIR). The aerial photos were then processed to a CIR orthophoto. The area of study consisted of 68 private parcels (some of them were abandoned; 68.57 ha; scanned cadastral maps from the local survey office; land use information) in the direct neighbourhood of the State Forest, on which a forest succession could often be observed. The operator vectorized forest (trees and shrubs) succession areas on the 2D CIR orthophoto. They were then compared with the results from the OBIA and GIS analysis, based on the normalized digital surface model. The results showed that areas with high vegetation cover were three times larger than the official land cover database (cadastral maps).     

Analysis of long‐term water balance in the source area of the Yellow River basin

To analyse the long‐term water balance of the Yellow River basin, a new hydrological model was developed and applied to the source area of the basin. The analysis involved 41 years (1960–2000) of daily observation data from 16 meteorological stations. The model is composed of the following three sub‐models: a heat balance model, a runoff formation model and a river‐routing network model. To understand the heat and water balances more precisely, the original model was modified as follows. First, the land surface was classified into five types (bare, grassland, forest, irrigation area and water surface) using a high‐resolution land‐use map. Potential evaporation was then calculated using land‐surface temperatures estimated by the heat balance model. The maximum evapotranspiration of each land surface was calculated from potential evaporation using functions of the leaf area index (LAI). Finally, actual evapotranspiration was estimated by regulating the maximum evapotranspiration using functions of soil moisture content. The river discharge estimated by the model agreed well with the observed data in most years. However, relatively large errors, which may have been caused by the overestimation of surface flow, appeared in some summer periods. The rapid decrease of river discharge in recent years in the source area of the Yellow River basin depended primarily on the decrease in precipitation. Furthermore, the results suggested that the long‐term water balance in the source area of the Yellow River basin is influenced by land‐use changes. Copyright © 2007 John Wiley & Sons, Ltd.     

Remote measurement of river morphology via fusion of LiDAR topography and spectrally based bathymetry

This study developed and evaluated a hybrid approach to remote measurement of river morphology that combines LiDAR topography with spectrally based bathymetry. Comparison of filtered LiDAR point clouds with surveyed cross‐sections indicated that subtle features on low‐relief floodplains were accurately resolved by LiDAR but that submerged areas could not be detected due to strong absorption of near‐infrared laser pulses by water. The reduced number of returns made the active channel evident in a LiDAR point density map. A second dataset suggested that pulse intensity also could be used to discriminate land from water via a threshold‐based masking procedure. Fusion of LiDAR and optical data required accurate co‐registration of images to the LiDAR, and we developed an object‐oriented procedure for achieving this alignment. Information on flow depths was derived by correlating pixel values with field measurements of depth. Highly turbid conditions dictated a positive relation between green band radiance and flow depth and contributed to under‐prediction of pool depths. Water surface elevations extracted from the LiDAR along the water's edge were used to produce a continuous water surface that preserved along‐channel variations in slope. Subtracting local flow depths from this surface yielded estimates of the bed elevation that were then combined with LiDAR topography for exposed areas to create a composite representation of the riverine terrain. The accuracy of this terrain model was assessed via comparison with detailed field surveys. A map of elevation residuals showed that the greatest errors were associated with underestimation of pool depths and failure to capture cross‐stream differences in water surface elevation. Nevertheless, fusion of LiDAR and passive optical image data provided an efficient means of characterizing river morphology that would not have been possible if either dataset had been used in isolation. Copyright © 2011 John Wiley & Sons, Ltd.     

Performance evaluation of three DEM‐based fluvial terrace mapping methods

The availability of high‐resolution digital elevation models (DEMs) derived from airborne light detection and ranging (LiDAR) surveys has spurred the development of several methods to identify and map fluvial terraces. The post‐glacial landscape of the Sheepscot River watershed, Maine, where land‐use change has produced fill terraces upstream of historic dam sites, was selected to implement a comparison between terrace mapping methodologies. At four study sites within the watershed, terraces were manually mapped on LiDAR‐DEM‐derived hillshade images to facilitate the comparison among fully and semi‐automated DEM‐based procedures, including: (1) spatial relationships between interpreted terraces and surrounding natural topography, (2) feature classification algorithms, and (3) the TerEx terrace mapping toolbox. Each method was evaluated based on its accuracy and ease of implementation. The four study sites have varying longitudinal slope (0.0008–0.006 m/m), channel width (< 5–30 m), surrounding landscape relief (20–80 m), type and density of surrounding land use, and mapped surficial geologic units. All methods generally overestimate terrace areas (average predicted area 210% of manually defined area) with the most accurate results achieved within confined river valleys surrounded by the steep hillslopes. Accuracy generally decreases for study sites surrounded by low‐relief landscapes (predicted areas ranged 4–953% of manual delineations). We conclude with the advantages and drawbacks of each method tested and make recommendations for the scenarios where the use of each method is most appropriate. Copyright © 2016 John Wiley & Sons, Ltd.     

Land use and land cover classification using phenological variability from MODIS vegetation in the Upper Pangani River Basin,Eastern Africa

In arid and semi-arid areas, evaporation fluxes are the largest component of the hydrological cycle, with runoff coefficient rarely exceeding 10%. These fluxes are a function of land use and land management and as such an essential component for integrated water resources management. Spatially distributed land use and land cover (LULC) maps distinguishing not only natural land cover but also management practices such as irrigation are therefore essential for comprehensive water management analysis in a river basin. Through remote sensing, LULC can be classified using its unique phenological variability observed over time. For this purpose, sixteen LULC types have been classified in the Upper Pangani River Basin (the headwaters of the Pangani River Basin in Tanzania) using MODIS vegetation satellite data. Ninety-four images based on 8 day temporal and 250 m spatial resolutions were analyzed for the hydrological years 2009 and 2010. Unsupervised and supervised clustering techniques were utilized to identify various LULC types with aid of ground information on crop calendar and the land features of the river basin. Ground truthing data were obtained during two rainfall seasons to assess the classification accuracy. The results showed an overall classification accuracy of 85%, with the producer’s accuracy of 83% and user’s accuracy of 86% for confidence level of 98% in the analysis. The overall Kappa coefficient of 0.85 also showed good agreement between the LULC and the ground data. The land suitability classification based on FAO-SYS framework for the various LULC types were also consistent with the derived classification results. The existing local database on total smallholder irrigation development and sugarcane cultivation (large scale irrigation) showed a 74% and 95% variation respectively to the LULC classification and showed fairly good geographical distribution. The LULC information provides an essential boundary condition for establishing the water use and management of green and blue water resources in the water stress Pangani River Basin.     

Towards a protocol for laser scanning in fluvial geomorphology

Advances in spatial analytical software allow digital elevation models (DEMs) to be produced which accurately represent landform surface variability and offer an important opportunity to measure and monitor morphological change and sediment transfer across a variety of spatial scales. Many of the techniques presently employed (aerial LIDAR, EDM theodolites, GPS, photogrammetry) suffer coverage or resolution limitations resulting in a trade‐off between spatial coverage and morphologic detail captured. This issue is particularly important when rates of spatial and temporal change are considered for fluvial systems. This paper describes the field and processing techniques required for oblique laser scanning to acquire 0·01 m resolution digital elevation data of an upland reach of the River Wharfe in the UK. The study site is variable with rapidly changing morphology, diverse vegetation and the presence of water, and these are evaluated with respect to laser data accuracy. Scan location, frequency and distance are discussed with reference to survey accuracy and efficiency, and a field protocol is proposed. Scan data cloud merging was achieved with a high degree of precision (sub‐centimetre) and positional data are shown to be very accurate for exposed surfaces. Vegetation and water decrease the accuracy, as the laser pulse is often prevented from reaching the ground surface or is not returned. Copyright © 2006 John Wiley & Sons, Ltd.     

A discontinuity in the late Pleistocene alluvial deposits,Hwacheon‐ri,Gyeongju, Korea: Occurrences and paleoenvironmental implication

A sedimentary discontinuity is present in the late Pleistocene alluvial deposits exposed along the cliff in stream side, Gyeongju, Korea. Sedimentological study, Optically Stimulated Luminescence (OSL) age dating, and X‐ray diffraction (XRD), and X‐ray fluorescence spectrometer (XRF) analyses were conducted in order to interpret the origin of the discontinuity surface. Based on the sedimentological study, these deposits can be divided into three distinct stages, in ascending order: (Stage 1) development of a braided stream flowing from south to north and deposition by debris flows from the mountain aside the stream during and/or after deposition of the braided stream; (Stage 2) deposition by intermittent events during a state of stagnation after the abandonment or migration of the previously existed braided stream; and (Stage 3) deposition of gravels from debris flows from the mountain aside the stream. Hornfelsic gravels are common in Stage 1, whereas andesitic gravels are predominant in Stage 3, suggesting the provenance change from Stage 1 to Stage 3. The discontinuity surface is laterally extensive and marked by a distinct carbonaceous dark grey horizon between Stage 2 and Stage 3. It is characteristic that rootlets mineralized by vivianite are present, and iron‐oxide crusts are cutting across irregularly below the discontinuity surface. It is thus interpreted that the shift of depositional environment from an alluvial plain (Stage 2) (125 ka) to an alluvial fan (Stage 3) (94–55 ka) was an alluvial response to sea level change from the interglacial to the glacial. The development of iron‐oxide crusts and diagenetic vivianite in the discontinuity surface suggests humid condition persisted during the paleoclimatic shift from the last interglacial to the last glacial stages.     

Bar dynamics and bifurcation evolution in a modelled braided sand‐bed river

Morphodynamics in sand‐bed braided rivers are associated with simultaneous evolution of mid‐channel bars and channels on the braidplain. Bifurcations around mid‐channel bars are key elements that divide discharge and sediment. This, in turn, may control the evolution of connected branches, with effects propagating to both upstream and downstream bifurcations. Recent works on bifurcation stability and development hypothesize major roles of secondary flow and gradient advantage. However, this has not been tested for channel networks within a fully developed dynamic braided river. A reason for this is a lack of detailed measurements with sufficient temporal and spatial length, covering multiple bifurcations. Therefore we used a physics‐based numerical model to generate a dataset of bathymetry, flow and sediment transport of an 80 km river reach with self‐formed braid bars and bifurcations. The study shows that bar dissection due to local transverse water surface gradients is the dominant bifurcation initiation mechanism, although conversion of unit bars into compound bars dominates in the initial stage of a braided river. Several bifurcation closure mechanisms are equally important. Furthermore, the study showed that nodal point relations for bifurcations are unable to predict short‐term bifurcation evolution in a braided river. This is explained by occurrence of nonlinear processes and non‐uniformity within the branches, in particular migrating bars and larger‐scale backwater‐effects, which are not included in the nodal point relations. Planform morphology, on the other hand, has predictive capacity: bifurcation angle asymmetry and bar‐tail limb shape are indicators for near‐future bifurcation evolution. Remote sensing data has predictive value, for which we developed a conceptual model for interactions between bars, bifurcations and channels in the network. We conducted a preliminary test of the conceptual model on satellite images of the Brahmaputra. Copyright © 2015 John Wiley & Sons, Ltd.