Hydrogeochemical and Stable Isotope Characteristics of the River Idrijca (Slovenia), the Boundary Watershed Between the Adriatic and Black Seas

The hydrogeochemical and isotope characteristics of the River Idrijca, Slovenia, where the world’s second largest mercury (Hg) mine is located, were investigated. The River Idrijca, a typical steep mountain river, has an HCO₃ ⁻–Ca²⁺–Mg²⁺ chemical composition. Its Ca²⁺/Mg²⁺ molar ratio indicates that dolomite weathering prevails in the watershed. The River Idrijca and its tributaries are oversaturated with respect to calcite and dolomite. The pCO₂ pressure is up to 13 times over atmospheric pressure and represents a source of CO₂ to the atmosphere. δ¹⁸O values in river water indicate primary control from precipitation and enrichment of the heavy oxygen isotope of infiltrating water recharging the River Idrijca from its slopes. The δ¹³C_DIC values range from −10.8 to −6.6‰ and are controlled by biogeochemical processes in terrestrial environments and in the stream: (1) exchange with atmospheric CO₂, (2) degradation of organic matter, (3) dissolution of carbonates, and (4) tributaries. The contributions of these inputs were calculated according to steady state equations and are estimated to be—11%:19%:30%:61% in the autumn and 0%:26%:39%:35% in the spring sampling seasons.     

Contrasting stable isotope behavior between calcite and dolomite marbles,Lone Mountain,Nevada

 Late Proterozoic to Cambrian carbonate rocks from Lone Mountain, west central Nevada, record multiple post-depositional events including: (1) diagenesis, (2) Mesozoic regional metamorphism, (3) Late Cretaceous contact metamorphism, related to the emplacement of the Lone Mountain granitic pluton and (4) Tertiary hydrothermal alteration associated with extension, uplift and intrusion of silicic porphyry and lamprophyre dikes. Essentially pure calcite and dolomite marbles have stable isotopic compositions that can be divided into two groups, one with positive δ¹³C values from+3.1 to +1.4 ‰ (PDB) and high δ¹⁸O values from +21.5 to +15.8 ‰ (SMOW), and the other with negative δ¹³C values from –3.3 to –3.6‰ and low δ¹⁸O values from +16.9 to +11.1‰. Marbles also contain minor amounts of quartz, muscovite and phlogopite. Brown and blue luminescent, clear, smooth textured quartz grains from orange luminescent calcite marbles have high δ¹⁸O values from +23.9 to +18.1‰, while brown luminescent, opaque, rough textured quartz grains from red luminescent dolomite marbles typically have low δ¹⁸O values from +2.0 to +9.3‰. The δ¹⁸O values of muscovite and phlogopite from marbles are typical of micas in metamorphic rocks, with values between +10.4 and +14.4‰, whereas mica δD values are very depleted, varying from −102 to −156‰. No significant lowering of the δ¹⁸O values of Lone Mountain carbonates is inferred to have occurred during metamorphism as a result of devolatilization reactions because of the essentially pure nature of the marbles. Bright luminescence along the edges of fractures, quartz cements and quartz overgrowths in dolomite marbles, low δD values of micas, negative δ¹³C values and low δ¹⁸O values of calcite and dolomite, and depleted δ¹⁸O values of quartz from dolomite marbles all indicate that meteoric fluids interacted with Lone Mountain marbles during the Tertiary. Partial oxygen isotopic exchange between calcite and low ¹⁸O meteoric fluids lowered the δ¹⁸O values of calcite, resulting in uniform quartz-calcite fractionations that define an apparent pseudoisotherm. These quartz-calcite fractionations significantly underestimate both the temperature of metamorphism and the temperature of post-metamorphic alteration. Partial oxygen isotopic exchange between quartz and meteoric fluids also resulted in ¹⁸O depletion of quartz from dolomite marbles. This partial exchange was facilitated by an increase in the surface area of the quartz as a result of its dissolution by meteoric fluids. The negative δ¹³C values in carbonates result from the oxidation of organic material by meteoric fluids following metamorphism. Stable isotopic data from Lone Mountain marbles are consistent with the extensive circulation of meteoric hydrothermal fluids throughout western Nevada in Tertiary time. Received: 1 February 1994/Accepted: 12 September 1995     

Stable isotope characterisation of co-existing carbonates from the Holocene Gallocanta lake (NE Spain): palaeolimnological implications

The sedimentary succession of Gallocanta lake, a closed saline lake located in the Iberian Range (NE Spain), documents two successive lacustrine stages: (1) brackish lake stage and (2) shallow saline lake stage. The saline stage corresponds to the present-day situation in which the lake water properties are mainly controlled by a strongly negative annual water balance. The carbonates of the brackish lake stage have relatively constant δ¹⁸O values, however, they are rather high (δ¹⁸O_Do = 2.4‰ and δ¹⁸O_Cc = 4.5‰ mean values) suggesting a hydrologically closed lake with a long residence time of the waters. δ¹⁸O values of carbonates from the saline stage vary greatly, and are lighter than in the previous stage (δ¹⁸O_Do = 0.5‰, δ¹⁸O_Cc = −0.7‰, δ¹⁸O_Mgs = −2.3‰ mean values). These carbonates also precipitated in a hydrologically closed lake, but in equilibrium with a lake water of more variable isotopic composition. The δ¹³C values for carbonates of both stages reflect a mixing of different pools of carbon, but during saline stage δ¹³C values have been more controlled by the equilibrium of the lake waters with atmospheric CO₂. During the current stage, calcite and dolomite precipitate in Gallocanta lake mainly during spring and summer, although dolomite precipitation is more favoured towards the summer. Magnesite precipitates at the beginning of autumn, when the first rainfall re-dissolves the saline surface crust, producing saline waters with a high Mg²⁺ content. The isotopic composition of lake waters sampled in 2005 are far higher than those calculated from the carbonates. It is considered that this could be due to two factors: either because there have not been many extremely dry years (like the year 2005) during the development of the lake, or because the physical and chemical characteristics of the lake waters in such conditions are not appropriate for the development of these minerals.     

The Paleoproterozoic carbonate-hosted Pering Zn–Pb deposit, South Africa. II: fluid inclusion, fluid chemistry and stable isotope constraints

The Pering deposit is the prime example of Zn–Pb mineralisation hosted by stromatolitic dolostones of the Neoarchean to Paleoproterozoic Transvaal Supergroup. The hydrothermal deposit centers on subvertical breccia pipes that crosscut stromatolitic dolostones of the Reivilo Formation, the lowermost portion of the Campbellrand Subgroup. Four distinct stages of hydrothermal mineralisation are recognised. Early pyritic rock matrix brecciation is followed by collomorphous sphalerite mineralisation with replacive character, which, in turn, is succeeded by coarse grained open-space-infill of sphalerite, galena, sparry dolomite, and quartz. Together, the latter two stages account for ore-grade Zn–Pb mineralisation. The fourth and final paragenetic stage is characterised by open-space-infill by coarse sparry calcite. The present study documents the results of a detailed geochemical study of the Pering deposit, including fluid inclusion microthermometry, fluid chemistry and stable isotope geochemistry of sulphides (δ³⁴S) and carbonate gangue (δ¹³C and δ¹⁸O). Microthermometric fluid inclusion studies carried out on a series of coarsely grained crystalline quartz and sphalerite samples of the latter, open-space-infill stage of the main mineralisation event reveal the presence of three major fluid types: (1) a halite–saturated aqueous fluid H₂O–NaCl–CaCl₂ (>33 wt% NaCl equivalent) brine, (2) low-salinity meteoric fluid (<7 wt% NaCl) and (3) a carbonic CH₄–CO₂–HS⁻ fluid that may be derived from organic material present within the host dolostone. Mixing of these fluids have given rise to variable mixtures (H₂O–CaCl₂–NaCl ±(CH₄–CO₂–HS⁻), 2 to 25 wt% NaCl+CaCl₂). Heterogeneous trapping of the aqueous and carbonic fluids occurred under conditions of immiscibility. Fluid temperature and pressure conditions during mineralisation are determined to be 200–210°C and 1.1–1.4 kbar, corresponding to a depth of mineralisation of 4.1–5.2 km. Chemical analyses of the brine inclusions show them to be dominated by Na and Cl with lesser amounts of Ca, K and SO₄. Fluid ratios of Cl/Br indicate that they originated as halite saturated seawater brines that mixed with lower salinity fluids. Analyses of individual brine inclusions document high concentrations of Zn and Pb (∼1,500 and ∼200 ppm respectively) and identify the brine as responsible for the introduction of base metals. Stable isotope data were acquired for host rock and hydrothermal carbonates (dolomite, calcite) and sulphides (pyrite, sphalerite, galena and chalcopyrite). The ore-forming sulphides show a trend to ³⁴S enrichment from pyrite nodules in the pyritic rock matrix breccia (δ³⁴S = −9.9 to +3.7‰) to paragenetically late chalcopyrite of the main mineralisation event (δ³⁴S = +30.0‰). The observed trend is attributed to Rayleigh fractionation during the complete reduction of sulphate in a restricted reservoir by thermochemical sulphate reduction, and incremental precipitation of the generated sulphide. The initial sulphate reservoir is expected to have had an isotopic signature around 0‰, and may well represent magmatic sulphur, oxidised and leached by the metal-bearing brine. The δ¹⁸O values of successive generations of dolomite, from host dolostone to paragenetically late saddle dolomite follow a consistent trend that yields convincing evidence for extensive water rock interaction at variable fluid–rock ratios. Values of δ¹³C remain virtually unchanged and similar to the host dolostone, thus suggesting insignificant influx of CO₂ during the early and main stages of mineralisation. On the other hand, δ¹³C and δ¹⁸O of post-ore calcite define two distinct clusters that may be attributed to changes in the relative abundance in CH₄ and CO₂ during waning stages of hydrothermal fluid flow.     

Water-rock interactions and chemical compositional variations during ductile deformation of the NW-striking shear zone in the Jiapigou gold belt,China

Two kinds of mylonite series rocks, felsic and mafic, have been recognized in the NW-striking shear zone of the Jiapigou gold belt. During ductile deformation, a large amount of fluid interacted intensively with the mylonite series rocks: plagioclases were sericitized and theAn values declined rapidly, finally all of them were transformed to albites; dark minerals were gradually replaced by chlorites (mostly ripidolite). Meanwhile, large-scale and extensive carbonation also took place, and the carbonatization minerals varied from calcite to dolomite and ankerite with the development of deformation. The δ¹³C values of the carbonates are −3.0‰ – −5.6‰ suggesting a deep source of carbon. The ductile deformation is nearly an iso-volume one (f _v≈1). With the enhancement of shear deformation, SiO₂ in the two mylonite series rocks was depleted, while volatile components suchs as CO₂ and H₂O, and some ore-forming elements such as Au and S were obviously enriched. But it is noted that the enrichment of Au in both the mylonite series rocks did not reach the paygrade of gold. The released SiO₂ from water-rock interactions occurred in the form of colloids and absorbed gold in the fluid. When brittle structures were formed locally in the ductile shear zone, the ore-forming fluids migrated to the structures along microfractures, and preciptated auriferous quartz because of reduction of pressure and temperature. Fluid inclusion study shows that the temperature and pressure of the ore-forming fluids are 245–292°C and 95.4–131.7 MPa respectively; the salinity is 12.88–16.33wt% NaCl; the fluid-phase is rich in Ca²⁺, K⁺, Na⁺, Mg²⁺, F⁻ and Cl⁻, while the gaseous phases are rich in CO₂ and CH₄. The δD and δ¹⁸O, values of the ore-forming fluid are −84.48‰ – −91.73‰ and −0.247‰ – +2.715‰ respectively, suggesting that the fluid is composed predominantly of meteoric water. This project is financially supported by the National Natural Science Foundation of China (No. 9488010).     

Origin of ultramafic-hosted magnesite on Margarita Island,Venezuela

Ultramafic-hosted deposits of magnesite (MgCO₃) have been studied on Margarita Island, Venezuela, to elucidate the source of carbon and conditions of formation for this type of ore. Petrographic, mineralogic, and δ¹⁸O data indicate that magnesite precipitated on Margarita in near-surface environments at low P and T. δ¹³C ranges from −9 to −16‰ PDB within the magnesite and −8 to −10‰ PDB within some calcite and dolomite elsewhere on the island. The isotopically light dolomite fills karst and the calcite occurs as stock-work veins which resemble the magnesite deposits. These carbon isotopic ratios are consistent with a deep-seated source rather than an overlying source from a zone of surficial weathering. However, there is not much enrichment of precious metals and no enrichment of heavy rare-earth elements, as would be expected if the carbon had migrated upward as aqueous carbonate ions. The carbon probably has risen as a gaseous mixture of CO₂ and CH₄ which partially dissolved in near-surface water before leaching cations and precipitating as magnesite and other carbonates. The process probably is ongoing, given regional exhalation of carbonaceous gases.     

Calcium and magnesium‐limited dolomite precipitation at Deep Springs Lake,California

Dolomite [Ca,Mg(CO₃)₂] precipitation from supersaturated ionic solutions at Earth surface temperatures is considered kinetically inhibited because of the difficulties experienced in experimentally reproducing such a process. Nevertheless, recent dolomite is observed to form in hypersaline and alkaline environments. Such recent dolomite precipitation is commonly attributed to microbial mediation because dolomite has been demonstrated to form in vitro in microbial cultures. The mechanism of microbially mediated dolomite precipitation is, however, poorly understood and it remains unclear what role microbial mediation plays in natural environments. In the study presented here, simple geochemical methods were used to assess the limitations and controls of dolomite formation in Deep Springs Lake, a highly alkaline playa lake in eastern California showing ongoing dolomite authigenesis. The sediments of Deep Springs Lake consist of unlithified, clay‐fraction dolomite ooze. Based on δ¹⁸O equilibria and textural observations, dolomite precipitates from oxygenated and agitated surface brine. The Na‐SO₄‐dominated brine contains up to 500 mm dissolved inorganic carbon whereas Mg²⁺ and Ca²⁺ concentrations are ca 1 and 0·3 mm , respectively. Precipitation in the subsurface probably is not significant because of the lack of Ca²⁺ (below 0·01 mm ). Under such highly alkaline conditions, the effect of microbial metabolism on supersaturation by pH and alkalinity increase is negligible. A putative microbial effect could, however, support dolomite nucleation or support crystal growth by overcoming a kinetic barrier. An essential limitation on crystal growth rates imposed by the low Ca²⁺ and Mg²⁺ concentrations could favour the thermodynamically more stable carbonate phase (which is dolomite) to precipitate. This mode of unlithified dolomite ooze formation showing δ¹³C values near to equilibrium with atmospheric CO₂ (ca 3‰) contrasts the formation of isotopically light (organically derived), hard‐lithified dolomite layers in the subsurface of some less alkaline environments. Inferred physicochemical controls on dolomite formation under highly alkaline conditions observed in Deep Springs Lake may shed light on conditions that favoured extensive dolomite formation in alkaline Precambrian oceans, as opposed to modern oceans where dolomites only form diagenetically in organic C‐rich sediments.     

Relationship between footwall composition,crustal contamination,and fluid–rock interaction in the Platreef,Bushveld Complex,South Africa

In the northern limb of the 2.06-Ga Bushveld Complex, the Platreef is a platinum group elements (PGE)-, Cu-, and Ni-mineralized zone of pyroxenite that developed at the intrusion margin. From north to south, the footwall rocks of the Platreef change from Archaean granite to dolomite, hornfels, and quartzite. Where the footwall is granite, the Sr-isotope system is more strongly perturbed than where the footwall is Sr-poor dolomite, in which samples show an approximate isochron relationship. The Nd-isotope system for samples of pyroxenite and hanging wall norite shows an approximate isochron relationship with an implied age of 2.17 ± 0.2 Ga and initial Nd-isotope ratio of 0.5095. Assuming an age of 2.06 Ga, the ɛNd values range from −6.2 to −9.6 (ave. −7.8, n = 17) and on average are slightly more negative than the Main Zone of the Bushveld. These data are consistent with local contamination of an already contaminated magma of Main Zone composition. The similarity in isotope composition between the Platreef pyroxenites and the hanging wall norites suggests a common origin. Where the country rock is dolomite, the Platreef has generally higher plagioclase and pyroxene δ ¹⁸O values, and this indicates assimilation of the immediate footwall. Throughout the Platreef, there is considerable petrographic evidence for sub-solidus interaction with fluids, and the Δ _{plagioclase–pyroxene} values range from −2 to +6, which indicates interaction at both high and low temperatures. Whole-rock and mineral δD values suggest that the Platreef interacted with both magmatic and meteoric water, and the lack of disturbance to the Sr-isotope system suggests that fluid–rock interaction took place soon after emplacement. Where the footwall is granite, less negative δD values suggest a greater involvement of meteoric water. Consistently higher values of Δ _{plagioclase–pyroxene} in the Platreef pyroxenites and hanging wall norites in contact with dolomite suggest prolonged interaction with CO₂-rich fluid derived from decarbonation of the footwall rocks. The overprint of post crystallization fluid–rock interaction is the probable cause of the previously documented lack of correlation between PGE and sulfide content on the small scale. The Platreef in contact with dolomite is the focus of the highest PGE grades, and this suggests that dolomite contamination played a role in PGE concentration and deposition, but the exact link remains obscure. It is a possibility that the CO₂ produced by decarbonation of assimilated dolomite enhanced the process of PGE scavenging by sulfide precipitation.     

Dolomite Versus Calcite Weathering in Hydrogeochemically Diverse Watersheds Established on Bedded Carbonates (Sava and So?a Rivers, Slovenia)

The relative contributions of dolomite to calcite weathering related to riverine fluxes are investigated on a highly resolved spatial scale in the diverse watersheds of Slovenia, which previous work has shown have some of the highest carbonate-weathering intensities in the world and suggests that dolomite weathering is favored over limestone weathering in mixed carbonate watersheds. The forested Sava and So?a River watersheds of Slovenia with their headwaters in the Julian Alps drain alpine regions with thin soils (<30 cm) and dinaric karst regions with thicker soils (0 to greater than 70 cm) all developed over bedded Mesozoic carbonates (limestone and dolomite), and siliclastic sediments is the ideal location for examining temperate zone carbonate weathering. This study extends previous work, presenting geochemical data on source springs and documenting downstream geochemical fluctuations within tributaries of the Sava and So?a Rivers. More refined sampling strategies of springs and discrete drainages permit directly linking the stream Mg²⁺/Ca²⁺ ratios to the local bedrock lithology and the HCO₃ ^? concentrations to the relative soil depths of the tributary drainages. Due to differences in carbonate source lithologies of springs and tributary streams, calcite and dolomite weathering end members can be identified. The Mg²⁺/Ca²⁺ ratio of the main channel of the Sava River indicates that the HCO₃ ^? concentration can be attributed to nearly equal proportions by mass of dolomite relative to calcite mineral weathering (e.g., Mg²⁺/Ca²⁺ mole ratio of 0.33). The HCO₃ ^? concentration and pCO₂ values increase as soil thickness and alluvium increase for discrete spring samples, which are near equilibrium with respect to calcite. Typically, this results in approximately 1.5 meq/l increase in HCO₃ ^? from the alpine to the dinaric karst regions. Streams in general do not change in HCO₃ ^?, Mg²⁺/Ca²⁺, or Mg²⁺/HCO₃ ^? concentrations down course, but warming and degassing of CO₂ produce high degrees of supersaturation with respect to calcite. Carbonate-weathering intensity (mmol/km²-s) is highest within the alpine regions where stream discharge values range widely to extreme values during spring snowmelt. Overall, the elemental fluxes of HCO₃ ^?, Ca²⁺, and Mg²⁺ from the tributary watersheds are proportional to the total water flux because carbonates dissolve rapidly to near equilibrium. Importantly, dolomite weathers preferentially over calcite except for pure limestone catchments.     

Estimation of dolomite formation: Dolomite precipitation and dolomitization

Reactive-transport models are developed here that produce dolomite via two scenarios: primary dolomite (no CaCO₃ dissolution involved) versus secondary dolomite (dolomitization, involving CaCO₃ dissolution). Using the available dolomite precipitation rate kinetics, calculations suggest that tens of meters of thick dolomite deposits cannot form at near room temperature (25-35°C) by inorganic precipitation mechanism, though this mechanism will provide dolomite aggregates that can act as the nuclei for dolomite crystallization during later dolomitization stage. Increase in supersaturation, Mg⁺²/Ca⁺² ratio and CO₃^-2 on the formation of dolomite at near room temperature are subtle except for temperature.This study suggests that microbial mediation is needed for appreciable amount of primary dolomite formation. On the other hand, reactive-transport models depicting dolomitization (temperature range of 40 to 200°C) predicts the formation of two adjacent moving coupled reaction zones (calcite dissolution and dolomite precipitation) with sharp dolomitization front, and generation of >20% of secondary porosity. Due to elevated temperature of formation, dolomitization mechanism is efficient in converting existing calcite into dolomite at a much faster rate compared to primary dolomite formation.     

Recharge areas and hydrochemistry of carbonate springs issuing from Semmering Massif, Austria, based on long-term oxygen-18 and hydrochemical data evidence

Oxygen-18 content and hydrochemistry of the springs issuing from Semmering Massif was intensively monitored with the aim of characterizing the recharge areas and hydrochemical evolution. The δ¹⁸O-altitude effect was determined using isotopic and hydrogeological data for small, mainly crystalline reference springs; it was approximated at –0.27 and –0.21‰/100 m respectively for the northern and southern side of the massif. Applying these values the mean recharge altitude of the springs was calculated. For the large-capacity carbonate springs it ranges between 1,100–1,410 m, compatible with the topographic and hydrogeologic frame work of the Mesozoic limestones and dolomites comprised in the Lower Austroalpine feeding the springs. Hydrochemical composition of the carbonate springs is dominated by Ca²⁺, Mg²⁺, HCO₃ ^– and SO₄ ^2– ions. With respect to calcite, the springs are nearly saturated, but undersaturated with dolomite (except for some springs that seemed close to saturation). As is typical for carbon dioxide influx from soils in a mountainous region, the mean equilibrium P_CO2 is low, within 10^–3.0 and 10^–2.5 atm (0.1–0.3 vol%). On a long-term scale, the pH and the calculated SI_c, SI_d and equilibrium P_CO2 show a strong seasonality, whereas Ca²⁺, Mg²⁺ and HCO₃ ^– concentration is almost time invariant. By integrating the results of δ¹⁸O and chemical data, altitudinal variability of the chemistry of carbonate groundwater is demonstrated. Reflecting the systematic change of biotic activity and recharge conditions in the catchment areas, a negative co-variation results between the recharge altitude and P_CO2 and HCO₃ ^– concentration (HCO₃ ^– is not modified by any source/sink terms, thus rendering the change on the carbonate chemistry). P_CO2 and HCO₃ ^– drop by approx. 0.22 log units (atm) and 38.6 mg/l, respectively, for every 100-m gain in recharge altitude. Electronic Publication     

Hydrogeochemistry of groundwater and anthropogenic control over dolomitization reactions in alluvial sediments of the Deoria district: Ganga plain,India

Groundwater is a critical resource in Deoria district, as it is the main source of drinking water and irrigation. The aquifer has deteriorated to a high degree, during the last two to three decades, in quality and quantity due to high population growth and environmental pollution. More than 90% of the population get their drinking water from subsurface waters. Fifteen wells were sampled in June 2006 to probe the hydrogeochemical components that influence the water quality. The results show that groundwater have EC, TDS, Na⁺, Mg²⁺, HCO₃⁻ and TH higher than the WHO, 1997 maximum desirable limits. A hydrogeochemical numerical model for carbonate minerals was constructed using the PHREEQC package. The regression analysis shows that there are three groups of elements which are significantly and positively correlated. The main hydrochemical facies of the aquifer (Ca + Mg–HCO₃) represents 33.33% of the total wells. The geochemical modeling demonstrated that the reactions responsible for the hydrochemical evolution in the area fall into three categories: (1) dissolution of salts, (2) precipitation of dolomite, (3) ion exchange. Solubility of dolomite, calcite, aragonite and gypsum were assessed in terms of the saturation index. The thermodynamic prerequisites for dolomite supersaturation reactions are satisfied by subsurface waters, since they are supersaturated with respect to dolomite, undersaturated (or in equilibrium) with respect to calcite, and undersaturated with respect to gypsum. The Ca²⁺ versus SO₄²⁻ and Mg²⁺ versus SO₄²⁻ trends are also compatible with homologous trends resulting from dolomite supersaturation.     

Isotope Geochemistry of Groundwater from Fractured Dolomite Aquifers in Central Slovenia

The hydrogeochemistry and isotope geochemistry of groundwater from 85 wells in fractured dolomite aquifers of Central Slovenia were investigated. This groundwater represents waters strongly influenced by chemical weathering of dolomite with an average of δ¹³C_CARB value of +2.2 ‰. The major groundwater geochemical composition is HCO₃ ^? > Ca²⁺ > Mg²⁺. Several differences in hydrogeochemical properties among the classes of dolomites were observed when they were divided based on their age and sedimentological properties, with a clear distinction of pure dolomites exhibiting high Mg²⁺/Ca²⁺ ratios and low Na⁺, K⁺ and Si values. Trace element and nutrient concentrations (SO₄ ^2?, NO₃ ^?) were low, implying that karstic and fractured dolomite aquifers are of good quality to be used as tap water. Groundwater was generally slightly oversaturated with respect to calcite and dolomite, and dissolved CO₂ was up to 46 times supersaturated relative to the atmosphere. The isotopic composition of oxygen (δ¹⁸O_H2O), hydrogen (δD_H2O) and tritium ranged from ?10.3 to ?8.4 ‰, from ?68.5 to ?52.7 ‰ and from 3.5 TU to 10.5 TU, respectively. δ¹⁸O and δD values fell between the GMWL (Global Meteoric Water Line) and the MMWL (Mediterranean Meteoric Water Line) and indicate recharge from precipitation with little evaporation. The tritium activity in groundwater suggests that groundwater is generally younger than 50 years. δ¹³C_DIC values ranged from ?14.6 to ?9.3 ‰ and indicated groundwater with a contribution of degraded organic matter/dissolved inorganic carbon in the aquifer. The mass balances for groundwater interacting with carbonate rocks suggested that carbonate dissolution contributes from 43.7 to 65.4 % and degradation of organic matter from 34.6 to 56.3 %.     

Hydrogeochemistry of the Koyna River basin,India

Hydrogeochemistry of the Koyna River basin, famous for the Koyna earthquake (magnitude 7) of 1967, has been studied. Basalt is the primary aquifer; laterites, alluvium, and talus deposits form aquifers of secondary importance. Groundwater generally occurs under water table conditions in shallow aquifers. Deeper aquifers are associated only with basalts. One hundred and 87 water samples were collected from various sources, such as dugwells, borewells, springs, and surface water, including 40 samples for analysis of iron. Only major constituents were analyzed. Analyses show that the concentrations of Ca²⁺ exceed that of Mg²⁺ in almost all water samples; the concentrations of Na⁺ are generally next to Ca²⁺ and are always higher than that of K⁺; and CO₃ ^2– and SO₄ ^2– are very low and are often negligible. Groundwater in borewells tapping deeper aquifers has higher mineralization compared to that in dugwells representing shallow aquifers. Majority of the water samples are dominated by alkaline earths (Ca²⁺, Mg²⁺) and weak acids (HCO₃ ⁻, CO₃ ^2–). Groundwater from shallow aquifers is generally calcium-bicarbonate type (53%) and calcium-magnesium-bicarbonate type (27%). In case of deeper aquifer, it is mostly calcium-magnesium-bicarbonate type (29%), sodium-bicarbonate type (24%), calcium-bicarbonate type (19%), calcium-magnesium-sodium-bicarbonate type (19%) and sodium-calcium-bicarbonate type (9%). Groundwater water is generally fit for drinking and irrigation purposes, except in the lower reaches of the Koyna River basin, which is affected by near water logging conditions.     

Water geochemical characteristic variations in and around a karst-dominated natural reserve area,southwestern China

This paper reports original data on the physical and chemical parameters of precipitation, river water and groundwater in and around the Longhushan Nature Reserve Area, located in southwestern China karst region, and provides a preliminary characterization of the hydrogeochemical process governing the natural water evolution in this area. The rainfall and river water mainly pertain to the HCO₃ ⁻–Ca²⁺ type and groundwater mainly pertain to the HCO₃ ⁻–Ca²⁺ + Mg²⁺ type. The HCO₃ ⁻ was the predominant anion and Ca²⁺ was the predominant cation in all waters, respectively. The Gibbs Boomerang Envelop model, the 1:1 relationship of Na⁺ plus K⁺ versus Cl⁻ as well as the 1:1 relationship of Ca²⁺ plus Mg²⁺ versus HCO₃ ⁻ all suggested geochemical weathering is the main controlling factor for the geochemical compositions of this natural water. In surface water, the Mg²⁺/Ca²⁺ ratios ranged from 0.32 to 0.42 and the Na⁺/Ca²⁺ varied between 0.04 and 0.05. In the groundwater, the Mg²⁺/Ca²⁺ ratios varied from 0.37 to 0.62 and were below the ideal ratio of 0.8. These ratios showed the presence of a dolomite source. Analysis of trace elements showed that As, B, Pb, Se, Sr, V and Zn elements were abundant in the natural water during summer in this region.     

Fluid evolution at the Variscan front in the vicinity of the Aachen thrust

Quartz–carbonate–chlorite veins were studied in borehole samples of the RWTH-1 well in Aachen. Veins formed in Devonian rocks in the footwall of the Aachen thrust during Variscan deformation and associated fluid flow. Primary fluid inclusions indicate subsolvus unmixing of a homogenous H₂O–CO₂–CH₄–(N₂)–Na–(K)–Cl fluid into a H₂O–Na–(K)–Cl solution and a vapour-rich CO₂–(H₂O, CH₄, N₂) fluid. The aqueous end-member composition resembles that of metamorphic fluids of the Variscan front zone with salinities ranging from 4 to 7% NaCl equiv. and maximum homogenisation temperatures of close to 400°C. Pressure estimates indicate a burial depth between 4,500 and 8,000 m at geothermal gradients between 50 and 75°C/26 MPa, but pressure decrease to sublithostatic conditions is also indicated, probably as a consequence of fracture opening during episodic seismic activity. A second fluid system, mainly preserved in pseudo-secondary and secondary fluid inclusions, is characterised by fluid temperatures between 200 and 250°C and salinities of <5% NaCl equiv. Bulk stable isotope analyses of fluids released from vein quartz, calcite, and dolomite by decrepitation yielded δD_H2O values from −89 to −113 ‰, δ¹³C_CH4 from −26.9 to −28.9‰ (VPDB) and δ¹³C_CO2 from −12.8 to −23.3‰ (VPDB). The low δD and δ¹³C range of the fluids is considered to be due to interaction with cracked hydrocarbons. The second fluid influx caused partial isotope exchange and disequilibrium. It is envisaged that an initial short lived flux of hot metamorphic fluids expelled from the epizonal metamorphic domains of the Stavelot–Venn massif. The metamorphic fluid was focused along major thrust faults of the Variscan front zone such as the Aachen thrust. A second fluid influx was introduced from formation waters in the footwall of the Aachen thrust as a consequence of progressive deformation. Mixing of the cooler and lower salinity formation water with the hot metamorphic fluid during episodic fluid trapping resulted in an evolving range of physicochemical fluid inclusion characteristics.     

Recent dolomitization of quaternary biocalcarenites from fuerteventura (Canary Islands)

Quaternary marine and eolian biocalcarenites in the supratidal breaker and spray zone along the Barlovento coast of the peninsula Jandía, Fuerteventura (Canary Islands) are dolomitized by percolating brines with a high Mg/Ca ratio resulting from evaporation of seawater on the sediment's surface. Only fragments of calcareous algae primarily consisting of high-magnesian calcite are replaced by a cryptocrystalline variety of dolomite. Dolomite also occurs in large euhedral crystals in intraparticle and interparticle pore spaces. In the marine biocalcarenite dolomite has a composition of Ca₅₆Mg₄₄(CO₃)₂. It is well ordered.     

The stability of transition metal dolomites in carbonate systems: a discussion

The instability of transition metal dolomites [CaR²⁺(CO₃)₂ where R²⁺ is Fe, Co, Ni, Cu, or Zn] and the limited substitution of transition metal cations for Mg in the dolomite structure can be accounted for by the effect of octahedral distortion. For example, trigonal elongation of the Fe octahedron, due to the Jahn-Teller effect, observed in siderite and ankerite, results in elongation of the Ca octahedron which is sensitive to distortion because the radius of Ca²⁺ is close to the upper limit for octahedral coordination. Co, Ni, Cu, Zn octahedra are also thought to be deformed, relative to Mg octahedra, in carbonates.The free energy of formation (ΔG^o_f) of R²⁺CO₃ becomes more positive with increasing octahedral distortion. Estimated ΔG^o_f(dolomite) as well as stabilities and solubility limits of R²⁺ in natural and synthetic dolomites suggest a series in order of decreasing stability: Mg >Mn >Zn >Fe >Co >Ni >Cu.ΔG^o_f(est.) for the terminal Fe-dolomite solid solution [72 mol% CaFe(CO₃)₂] in the system CaCO₃-MgCO₃-FeCO₃ may represent an empirical threshold value for dolomite stability which lies between ΔG^o_f for Mn- and Zn-dolomites. While Zn-dolomite is probably not a stable phase, very extensive solid solution toward CaZn(CO₃)₂ is to be expected in the system CaCO₃-MgCO₃-ZnCO₃. The tendency for transition metal dolomites to contain excess CaCO₃ can also be accounted for in terms of octahedral distortion and AG^o_f.     

Sulphur, carbon and oxygen isotope studies of early Variscan mineralisation and Pb-Sb vein deposits in the Cornubian orefield: implications for the scale of fluid movements during Variscan deformation

The strongly deformed Middle Devonian-Lower Carboniferous metasedimentary-volcanic successions of the Trevone Basin (SW England) contain stratiform and Pb-Sb vein deposits that reveal a wide variation in δ³⁴S and δ¹³C, reflecting mineral deposition during diagenesis, regional metamorphism and basin inversion. Pre-Variscan metasedimentary sulphide (δ³⁴S=−33.7 to −26.7‰) and metabasite sulphide (δ³⁴S=+4.0 to +10.8‰) suggest two accessible source reservoirs for sulphur which were available for Sb-As-(Au) and Pb-Zn-(Ag) mineralisation (δ³⁴S=−3.3 to −15.0‰) during late Variscan semiductile-brittle shear. On the basis of pressure-corrected fluid inclusion temperatures, the calculated composition of fluid sulphur reveals an enrichment in δ³⁴S_H2S in the individual vein parageneses and depletion of the fluid sulphur reservoir during evolution of the vein systems. Carbonates in the same veins are partly contemporaneous with Pb-Sb mineralisation and late tensional deformation; their isotopic composition (δ¹³C=−3.2 and −13.4‰) appears strongly influenced by the host formation. Fluid inclusions in post-tensional quartz show a marked reduction in CO₂, suggesting that episodes of CO₂ degassing in response to punctuated reductions in pressure during uplift and brittle deformation was an important mechanism for vein carbonation. An origin for the Pb-Sb mineralisation involving local remobilisation of sulphur from the mixed metasedimentary-volcanic succession is probably inseparable from processes connected with Variscan metamorphism and deformation. Although the N Cornish Variscan deformation is part of a spatially large-scale event, the isotopic evidence suggests compartmentalisation of sulphur and carbon isotope features and short distances between sources and sinks. Received: 15 August 1998 / Accepted: 8 October 1999