Morphology of the Tessera Terrain on Venus: Implications for the Composition of Tessera Material

The main goal of this paper is to estimate the possible composition of the tessera material on the basis of an interpretation of the morphology of the tessera precursor terrain. The results of detailed photogeologic analysis of tessera are presented. For the study, 56 randomly chosen areas that characterize the surface of large and small tessera massifs were selected. Each area represents a portion of the F-MAP photomosaics acquired at a 75 m/px resolution. The results of this study show that the tessera precursor terrain appears everywhere as plains. In its morphology, these plains are similar to the plains outside the tessera massifs. An overview of all possible mechanisms of the formation of plains on Venus and comparison of these mechanisms with the data of the chemical measurements on the surface of Venus suggests that the Venusian plains were formed as a result of the emplacement of low-viscous basaltic lava. This rather well-known conclusion is made here for the first time in order to estimate the possible composition of the tessera material. Thus, it is likely that the composition of the tessera precursor plains is similar to the composition of the basaltic plains on Venus. The products of posttessera volcanism in the form of morphologically smooth plains commonly occur within the tessera terrains. Morphologically, these plains are similar to the regional Venusian plains, which strongly suggests a basaltic composition of such plains. There are only two volcanic flows within the whole tessera terrain on Venus whose morphology permits one to interpret them as a manifestation of nonbasaltic, more siliceous volcanism. This means that the material of the regional tessera-bearing highlands very rarely responded to the thermal influence from below by siliceous volcanism. If some hypothetical granitelike material makes up the main portion of the tessera highlands, this material remains hidden. Therefore, the hypothesis of the granitelike bulk composition of the tessera highlands has little support from observations. At the current stage of the study of Venus, a model in which tessera highlands are composed predominantly of basalt with a possible, but insignificant component of more siliceous material is thought to be correct.     

Global stratigraphy of Venus: analysis of a random

The age relations between 36 impact craters with dark paraboloids and other geologic units and structures at these localities have been studied through photogeologic analysis of Magellan SAR images of the surface of Venus. Geologic settings in all 36 sites, about 1000 × 1000 km each, could be characterized using only 10 different terrain units and six types of structures. These units and structures form a major stratigraphic and geologic sequence (from oldest to youngest): 1) tessera terrain; 2) densely fractured terrains associated with coronae and in the form of remnants among plains; 3) fractured and ridged plains and ridge belts; 4) plains with wrinkle ridges; 5) ridges associated with coronae annulae and ridges of arachnoid annulae which are contemporary with wrinkle ridges of the ridged plains; 6) smooth and lobate plains; 7) fractures of coronae annulae, and fractures not related to coronae annulae, which disrupt ridged and smooth plains; 8) rift-associated fractures; 9) craters with associated dark paraboloids, which represent the youngest 10% of the Venus impact crater population (Campbellet al., 1992), and are on top of all volcanic and tectonic units except the youngest episodes of rift-associated fracturing and volcanism; surficial streaks and patches are approximately contemporary with dark-paraboloid craters.Mapping of such units and structures in 36 randomly distributed large regions (each 10⁶ km²) shows evidence for a distinctive regional and global stratigraphic and geologic sequence. On the basis of this sequence we have developed a model that illustrates several major themes in the history of Venus. Most of the history of Venus (that of its first 80% or so) is not preserved in the surface geomorphological record. The major deformation associated with tessera formation in the period sometime between 0.5–1.0 b.y. ago (Ivanov and Basilevsky, 1993) is the earliest event detected. In the terminal stages of tessera formation, extensive parallel linear graben swarms representing a change in the style of deformation from shortening to extension were formed on the tessera and on some volcanic plains that were emplaced just after (and perhaps also during the latter stages of the major compressional phase of tessera emplacement. Our stratigraphic analyses suggest that following tessera formation, extensive volcanic flooding resurfaced at least 85% of the planet in the form of the presently-ridged and fractured plains. Several lines of evidence favor a high flux in the post-tessera period but we have no independent evidence for the absolute duration of ridged plains emplacement. During this time, the net state of stress in the lithosphere apparently changed from extensional to compressional, first in the form of extensive ridge belt development, followed by the formation of extensive wrinkle ridges on the flow units. Subsequently, there occurred local emplacement of smooth and lobate plains units which are presently essentially undeformed. The major events in the latest 10% of the presently preserved history of Venus (less than 50 m.y. ago) are continued rifting and some associated volcanism, and the redistribution of eolian material largely derived from impact crater deposits.Detailed geologic mapping and stratigraphic synthesis are necessary to test this sequence and to address many of the outstanding problems raised by this analysis. For example, we are uncertain whether this stratigraphic sequence corresponds to geologic events which were generally synchronous in all the sites and all around the planet, or whether the sequence is simply a typical sequence of events which occurred in different places at different times. In addition, it is currently unknown whether the present state represents a normal consequence of the general thermal evolution of Venus (and is thus representative of the level of geological activity predicted for the future), or if Venus, has been characterized by a sequence of periodic global changes in the composition and thermal state of its crust and upper mantle (in which case, Venus could in the future return to levels of deformation and resurfacing typical of the period of tessera formation).     

Assemblages of geologic/morphologic units in the northern hemisphere of Venus

The geologic/morphologic map of the northern mid-to-high latitudes of Venus prepared by a Soviet science team on the basis of Venera 15/16 mission radar image coverage is analyzed and used to define six discrete assemblages of geologic/morphologic units that have well-defined geographic distributions. These assemblages have distinctive and differing geological and tectonic expressions and include: Plains Assemblage - which is dominated by lowland smooth plains and lowland rolling plains interpreted to be of volcanic origin, and a high concentration of small volcanic domes; Plains-Corona Assemblage - which is dominated by lowland smooth plains and lowland rolling plains interpreted to be of volcanic origin, at least ten coronae structures concentrated in the northern half of the region, and at least five large volcanoes, generally concentrated in the southern and western half of the region; Plains-Ridge Belt Assemblage - which is dominated by lowland smooth plains and lesser amounts of lowland rolling plains, major occurrences of ridge belts in a distinctive fan-shaped pattern, and very minor and patchy occurrences of tessera; Plains-Corona-Tessera Assemblage - which is dominated by approximately equal amounts of lowland smooth plains and lowland rolling plains, at least five coronae concentrated in the northern part of the region, a small number of large volcanoes, also in the northern part of the region, and numerous small patches of tesserae scattered throughout, and the highest abundance of small volcanic domes observed in the northern hemisphere; Tessera-Ridge Belt Assemblage — which is dominated by a few large areas (Fortuna, Laima, Tellus) and several smaller areas (Dekla, Meni) of tesserae, ridge belts generally arrayed in an angular and often orthogonal pattern different from the fan-shaped pattern of the Plains-Ridge Belt Assemblage, lowland rolling plains and lesser amounts of lowland smooth plains, and an upland rise (Bell Regio); Tessera-Mountain Belt Assemblage - which is centered on the two volcanoes Colette and Sacajawea in Lakshmi Planum, and characterized by the peripheral mountain belt/tessera pairs, with the tessera on the outboard side: Danu/Clotho (S), Akna/Atropos (W), Freyja/ltzpapalotl (N), and Maxwell/Fortuna (E).The distribution and characteristics of assemblages demonstrate that vertical and horizontal tectonic forces are operating on the crust and lithosphere of Venus in different ways in specific localized areas. Alternative models are outlined for the origin of each assemblage and the relationship between assemblages, and important unresolved questions are identified. A key to the further understanding of these assemblages is the origin of ridge belts and tessera terrain.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT. Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Landing on Venus: Past and future

We briefly describe the history of landings on Venus, the acquired geochemical data and their potential petrologic interpretations. We suggest a new approach to Venus landing site selection that would avoid the potential contamination by ejecta from upwind impact craters. We also describe candidate units to be sampled in both in situ measurement and sample return missions. For the in situ measurements, the “true” tessera terrain (tt) material is considered as the highest priority goal with the second priority given to transitional tessera terrain (ttt), shield plains (psh) and lobate plains (pl) materials. For the sample return mission, the material of regional plains with wrinkle ridges (pwr) is considered as the highest priority goal with the second priority given to tessera terrain (tt) material. Combining the desire to study materials of specific geologic units with the problem of avoiding potential contamination by ejecta from upwind impact craters, we have suggested several candidate landing sites for each of the geologic units. Although spacecraft ballistics and other constraints of specific mission profiles (VEP or others) may lead to the selection of different candidate sites, we believe that the approaches outlined in this paper can be helpful approach in optimizing mission science return.     

Sequential deformation of plains at the margins of Alpha Regio,Venus: Implications for tessera formation

Abstract— The boundaries between the highly deformed tessera terrain and adjacent volcanic plains are primarily those of embayment, where the tessera are stratigraphically older than the plains. Previous studies show that <3% of these boundaries display evidence of tectonic tilting after the emplacement of the plains. One of these unusual boundaries is the western margin of Alpha Regio tessera, a zone ～ 100 km in width that separates the plains from the interior structures of Alpha. This zone is characterized by margin parallel, fine‐scale (1–5 km) fractures, graben, and ridges that truncate and postdate the broad‐scale (10–30 km) ridges and troughs of the interior of Alpha. The western margin is embayed by several volcanic plains units that are progressively tilted and deformed by graben with closer proximity to Alpha Regio. The earliest deformation of the plains consists of northeast‐trending graben ～1 km in width that are similar in morphology and spacing to graben that deform intratessera plains and plains at the eastern boundary of Alpha. Northwest‐trending graben then formed over an interval marked by the emplacement of two additional plains units; their similarity to northwest‐trending structures emanating from Eve corona and the Lada Terra rift suggests a possible genetic relationship. The tilting of the plains adjacent to western Alpha implies relative vertical movement of the margin, either uplift of tessera or downwarping of plains subsequent to the formation and relaxation of the interior of Alpha Regio. Subsidence of plains at this locale is supported by the presence of a basin to the west of Alpha surrounded by a fracture belt contiguous with western Alpha. Thus, the fractures and deformation at the western boundary of Alpha may be related to the formation of a basin to the west of Alpha with some influence from the northernmost extension of the Lada Terra rift. Such a basin is not present at a section along the eastern boundary of Alpha Regio, where the origin of tilted plains remains equivocal. We conclude that the deformation along the western margin of Alpha Regio is not directly related to the process of tessera formation but is an example of tessera modification and is consistent with the stratigraphic position of tessera as the oldest unit observed on Venus.     

Radiative transfer in the atmosphere of Venus and application to surface emissivity retrieval from VIRTIS/VEX measurements

The radiation measurements of VIRTIS-M-IR (1-5 μm) on Venus Express provide a valuable database for systematic studies of the atmosphere and surface of the Earth’s sister planet. The present paper focuses on the investigation of physical parameters that determine the retrieval accuracy of deep atmosphere and surface features of Venus including compositional conditions, continuum absorption effects, and spectroscopic input data required for radiative transfer simulations. The parameter discussion shall serve as a reference for ongoing and future work on methodical and simulation input data improvements.The high variability of the nightside atmospheric and surface emission window radiances with respect to cloud opacity and surface elevation is modeled and discussed in direct comparison with measurements performed over the northern hemisphere. Venus surface elevation is retrieved using the 1.18 and 1.02 μm emission windows where radiance ratios are well suited to de-cloud the measurement data. In general, the ratio-based VIRTIS topography is in good agreement with the Magellan topography, but differences occur in localized areas. The paper discusses possible origins of such differences including surface emissivity “anomalies”. Surface emissivity variations that may be due to changes in the chemical composition (mineralogy) and surface texture are important indicators of the nature of the surface material.Preliminary radiance retrievals along a number of complete northern orbits reveal a trend towards lower values of highland surface emissivity compared to the surrounding lowlands. Already the Magellan radar experiment suggested compositional variations at moderately high altitudes over the tesserae. They probably indicate a more felsic component giving a hint to older surface forming processes.     

Diffuse scattering of radar on the surface of Venus: Origin and implications for the distribution of soils

Previous analysis of PV altimeter data has shown that ~25% of the surface of Venus is characterized by low values of reflectivity, interpreted as being due to the presence of porous materials such as soils. However, examination of a corrected reflectivity data set in combination with PV altimeter data suggests that no more than 5% of the surface of Venus is covered by soils more than several to tens of cm in depth. Most regions of apparent low reflectivity are instead interpreted to be due to the presence of small (5–50 cm) roughness elements on the surface that cause diffuse scattering at the 17 cm PV wavelength. Regions of low apparent reflectivity are of interest because of a correlation with tessera, a complex tectonic unit mapped from Venera 15/16 SAR data. Regions of tessera are characterized by a complex system of intersecting ridges and valleys thought to be of tectonic origin. Examination of possible models for the form of diffuse scatterers in the tessera suggests that they are rock fragments and originate from a mass-wasting process that is linked to the rugged nature of the terrain. Further, these diffuse scatterers are associated with other tectonic landforms, suggesting that they originate as part of tectonic deformation of the surface. Viewed from a geologic standpoint, the PV data sets are important tools for understanding tectonic, volcanic, and degradational processes on Venus, as well as for future interpretation of data from the Magellan mission.     

Estimates of abundance of the short-baseline (1-3 meters) slopes for different Venusian terrains using terrestrial analogues

The interplanetary mission, Venera-D, which is currently being planned, includes a lander. For a successful landing, it is necessary to estimate the frequency distributions of slopes of the Venusian surface at baselines that are comparable with the horizontal dimensions of lander (1–3 m). The available data on the topographic variations on Venus preclude estimates of the frequency of the short-wavelength slopes. In our study, we applied high-resolution digital terrain models (DTM) for specific areas in Iceland to estimate the slopes on Venus. The Iceland DTMs have 0.5 m spatial and 0.1 m vertical resolution. From the set of these DTMs, we have selected those that morphologically resemble typical landscapes on Venus such as tessera, shield, regional, lobate, and smooth plains. The mode of the frequency distribution of slopes on the model tessera terrain is within a 30°–40° range and a fraction of the surface has slopes <7°, which is considered as the upper safety limit. This is the primary interest. The frequency distribution of slopes on the model tessera is not changed significantly as the baseline is changed from 1 m to 3 m. The terrestrial surfaces that model shield and regional plains on Venus have a prominent slope distribution mode between 8°–20° and the fraction of the surfaces with slopes <7° is less than 30% on both 1 m and 3 m baselines. A narrow, left-shifted histogram characterizes the model smooth plains surfaces. The fraction of surfaces with slopes <7° is about 65–75% for the shorter baseline (1 m). At the longer baseline, the fraction of the shallow-sloped surfaces is increased and fraction of the steep slopes is decreased significantly. The fraction of surfaces with slopes <7° for the 3-m baseline is about 75–88% for the terrains that model both lobate and smooth plains.     

Geology and tectonics of the Themis Regio-Lavinia Planitia-Alpha Regio-Lada Terra area,Venus: Results from Arecibo image data

New radar images obtained from the Arecibo Observatory (resolution 1.5–4.0 km) for portions of the southern hemisphere of Venus show that: the upland of Phoebe Regio contains the southern extension of Devana Chasma, a rift zone extending 4200 km south from Theia Mons and interpreted as a zone of extension; Alpha Regio, the only large region of tessera within the imaged area, is similar to tessera mapped elsewhere on the planet and covers a smaller percentage of the surface than that observed in the northern high latitudes; the upland made of Ushas, Innini and Hathor Montes consists of three distinct volcanic constructs; Themis Regio is mapped as an ovoid chain of radar-bright arcuate single and double ring structures, edifices and bright lineaments. This area is interpreted as a region of mantle upwelling and on the basis of apparent split and separated features, a zone of localized faulting and extension. Linear zones of deformation in Lavinia Planitia are characterized by lineament belts that are often locally elevated, are similar to ridge belts mapped in the northern high latitudes and are interpreted to be characterized mainly by compression; radar-bright lava complexes within Lavinia Planitia are unique to this part of the planet and are interpreted to represent areas of eruption of high volumes of extremely fluid lava; the upland of Lada Terra is bound to the north by a linear deformation zone interpreted as extensional, is characterized by large ovoids and coronae, is interpreted to be associated with an area of mantle upwelling, and is in contrast to the northern high latitude highland of Ishtar Terra. Regions of plains in the southern hemisphere cover about 78%; of the mapped area and are interpreted to be volcanic in origin. Located within the area imaged (10–78 S) are 52 craters interpreted to be of impact origin ranging from 8 to 157 km in diameter. On the basis of an overall crater density of 0.94 craters/10⁶ km², it is determined that the age of this part of the Venus surface is similar to the 0.3 to 1.0 billion year age calculated for the equatorial region and northern high latitudes. The geologic characteristics of the portion of the Venus southern hemisphere imaged by Arecibo are generally similar to those mapped elsewhere on the planet. This part of the planet is characterized by widespread volcanic plains, large volcanic edifices, and zones of linear belt deformation. The southern hemisphere of Venus differs from northern high latitudes in that tessera makes up only a small percentage of the surface area and the ovoid chain in Themis Regio is unique to this part of the planet. On the basis of the analysis presented here, the southern hemisphere of Venus is interpreted to be characterized by regions of mantle upwelling on a variety of scales (ovoids, region made up of Ushas, Innini and Hathor Montes), upwelling and extension (Themis Regio) and localized compression (lineament belts in Lavinia Planitia).     

Tectonics of Venus: A review

The article presents a new tectonic scheme of Venus and gives the following interpretation of the planet's main structural units: (1) plains — areas of flood volcanism over stretched crust; (2) dome-like uplifts — areas of uplifting and volcanic activity above the mantle hot-spots; (3) coronae —former dome-like uplifts, partially subsided and diffused by gravity; (4) ridge belts — fold zones; (5) tesserae — fragments of ductile compression and shortening of crust; (6) supercoronae — coronae formed in the course of further evolution and relaxation of Beta-type uplifts. Ishtar Terra is considered to be a fragment of an ancient tessera paleocontinent, on the edge of which the Lakshmi supercorona is superimposed. Aphrodite Terra is considered as a belt of mantle hot-spot structures (dome-like uplifts, coronae, supercoronae, volcanoes, rifts).Three types of planetary belts have been distinguished on Venus: uplifted 'weakened' belts with an abundance of mantle hot-spot structures; a northern fan of ridge belts; and belts of low basalt plains. The center of the planetary system of uplifted weakened belts is situated in Atla Regio.The present tectonic structure of Venus is inferred to have formed during two stages of evolution characterized by different tectonic regimes. Stage I is a regime of soft ductile plates (formation of tessera uplifts and volcanic plains). Stage II is a formation of 'weakened' uplifted planetary belts, various tectonic regimes of mantle hot-spots, and plains-forming volcanism.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci. Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT, Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Lakshmi Planum,Venus: Characteristics and models of origin

Lakshmi Planum is distinctive and unique on the surface of Venus as an expansive (~2 × 10⁶km²), relatively smooth, flat plateau containing two large shield volcanoes and abundant volcanic plains in the midst of a region of extreme relief. It rises 3–5 km above the datum and is surrounded on all sides by bands of mountains interpreted to be of compressional tectonic origin. The major units mapped on Lakshmi are volcanic edifices, smooth, ridged and grooved plains units, and structural units referred to as ridged terrain. Three styles of volcanism are observed to dominate the surface of Lakshmi. Distributed effusive volcanism is associated with extensive plains deposits and many of the small shields, domes and cones mapped within the plateau. Centralized effusive volcanism is primarily associated with the paterae, Colette and Sacajawea, and their circumferential low-shield-forming deposits. The precise origin and evolution of these unusually large and complex structures is not understood, although a catastrophic, explosive origin is unlikely. Pyroclastic volcanism may be represented by a unit referred to as the diffuse halo. The origin and evolution of Lakshmi Planum is closely related to its compressional tectonic environment; volcanism on Lakshmi has occurred synchronously with tectonism in the surrounding orogenic belts. A model for the origin and evolution of Lakshmi Planum consisting of a continuous sequence of convergence and horizontal shortening of crustal segments against a preexisting block of tessera seems best able to account for the elevation, plateau shape and irregular polygonal outline of Lakshmi, as well as the presence of ridged terrain and its resemblance to tessera. Volcanism on Lakshmi is proposed to be the result of basal melting of a thickened crustal root. According to this model, the origin and evolution of Lakshmi Planum has consisted of the following sequence of events: (1) formation of a large, elevated block of tessera surrounded by low-lying plains; (2) convergence and underthrusting of crustal segments to produce peripheral mountain ranges, thickening, and uplift of the plateau; and (3) basal melting of the thickened crust and underthrust material and surface volcanism that occurred synchronously with continued edge deformation.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence). Gordon H. Pettengill (MIT. Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Geology of the southern Ishtar Terra/Guinevere and Sedna Planitae region on Venus

Recent high resolution, high incidence angle Arecibo radar images of southern Ishtar Terra and flanking plains of Guinevere and Sedna on Venus reveal details of topographic features resolved by Pioneer Venus. The high incidence angles of Arecibo images favor the detection of surface roughness-related features, and complement recently obtained low incidence angle Venera 15/16 images in which changes in surface topographic slope are well portrayed. Four provinces have been defined on the basis of radar characteristics in Arecibo images and topography. Volcanism and tectonism are the dominant processes in the mapped area, which has an average age of about 0.5–1.0 billion years (Ivanov et al., 1986). These processes vary in relative significance in the mapped provinces and it is likely that geologic activity has occurred simultaneously in all four provinces. On the basis of stratigraphic evidence, however, a general sequence is proposed which represents the major activity in each area. The low predominantly volcanic plains of Guinevere and Sedna Planitiae are the relatively oldest terrain. A major region of complex tectonic deformation, the Southern Ishtar Transition Zone, postdates much of the low plains and delineates the steep-sloped flanks of Ishtar Terra. Lakshmi Planum is characterized by a distinctive volcanic style (large low edifices, calderas, flanking plains) and at least in part postdates the Southern Ishtar Transition Zone. Relatively recent plains-style volcanism occurs locally in Sedna Planitia and embays the Southern Ishtar Transition Zone. Compressional deformation appears to dominate the mountains of the Ishtar plateau, but the nature of the tectonic deformation in the Southern Ishtar Transition Zone is very complex and likely represents a combination of extension, compression and strikeslip deformation. Arecibo data reveal additional coronae in the lowlands, suggesting that corona formation is an even more widespread process than indicated by the Venera data.     

Onset Time and Duration of Corona Activity on Venus: Stratigraphy and History from Photogeologic Study of Stereo Images

The details of stratigraphic units and structures making up six coronae and their regional surroundings on Venus were examined using full resolution Magellan images and stereoscopic coverage. Altimetry and stereoscopic coverage were essential in establishing the local stratigraphic relationships and the timing of corona-related topography. The degree of preservation of signatures of earlier corona-related activities and the scale of later corona-related activities vary significantly from corona to corona. We compared the geologic sequence in each corona to regional and global stratigraphic units, placing the coronae in the broader context of the geologic history of Venus. The results of this study were compared with earlier analyses bringing the total number of corona considered to about 15% of the total corona population. We found that corona started forming soon after tessera formation and largely spanned a significant part of the subsequent geologic history of Venus, over about 200–400 million years. Topographic annulae were initiated in early post-tessera time but were largely completely formed by the time of emplacement of regional plains with wrinkle ridges. Some coronae ceased activity by this time, while others continued until closer to the present, although showing evidence of waning activity. Coronae-associated volcanism dominated many coronae during this later stage. Convincing evidence of pre-regional plains corona- related volcanism was not found in the population examined here. We conclude that coronae formed in a two stage process; the first stage (tectonic phase) involved the annular warping of early extensive stratigraphic units of volcanic origin and the second (volcanic phase) involved coronae-related lava flow activity and local fracturing. For the vast majority of coronae, the first tectonic phase was largely complete prior to the emplacement of the regional plains (Pwr, plains with wrinkle ridges). The vast majority of corona-related volcanic activity (emplacement of Pl, lobate flows) occurred subsequent to the emplacement of regional plains. We found no evidence of coronae initiation in substantially later periods of the observed history of Venus. This revised version was published online in July 2006 with corrections to the Cover Date.     

Rotation period of Venus estimated from Venus Express VIRTIS images and Magellan altimetry

The 1.02 μm wavelength thermal emission of the nightside of Venus is strongly anti-correlated to the elevation of the surface. The VIRTIS instrument on Venus Express has mapped this emission and therefore gives evidence for the orientation of Venus between 2006 and 2008. The Magellan mission provided a global altimetry data set recorded between 1990 and 1992. Comparison of these two data sets reveals a deviation in longitude indicating that the rotation of the planet is not fully described by the orientation model recommended by the IAU. This deviation is sufficiently large to affect estimates of surface emissivity from infrared imaging. A revised period of rotation of Venus of 243.023 ± 0.002 d aligns the two data sets. This period of rotation agrees with pre-Magellan estimates but is significantly different from the commonly accepted value of 243.0185 ± 0.0001 d estimated from Magellan radar images. It is possible that this discrepancy stems from a length of day variation with the value of 243.023 ± 0.002 d representing the average of the rotation period over 16 years.     

Embayed intermediate volcanoes on Venus: Implications for the evolution of the volcanic plains

Volcanoes on Venus are classified according to size with studies on the stratigraphic position of large volcanoes proposing that most of the large volcanoes postdate the regional volcanic materials. Some studies regarding intermediate volcanoes proposed that some of these volcanic features could be large volcanoes with embayed flow aprons, a situation that would alter the previous stratigraphic considerations about large volcanoes on Venus.In this work I analyze the global population of embayed intermediate-size volcanoes and compare their summits with that of other edifices classified as large volcanoes. Intermediate-size volcanoes are considered embayed when: (1) flows from another source clearly overlap the volcano slopes, and (2) display scarps related to flank-failure processes but with the associated collapse deposits being absent (i.e. interpreted as covered). As result of the survey 88 embayed intermediate-size volcanoes have been catalogued and integrated into a Geographic Information System. These embayed volcanoes have summit sizes and characteristics similar to large volcanoes and, therefore, could be interpreted as possible large volcanoes with their flow aprons embayed. Embayment materials for these volcanoes include all the units present in the history of the volcanic plains and would indicate that this type of central volcanic edifice would occur throughout the geologic history recorded in the venusian plains.     

Geology of the Venus equatorial region from Pioneer Venus radar imaging

Pioneer Venus radar data has provided images (resolution 20- to 40-km) of approximately 50% of the total surface of Venus in a band between 45 ° N to 15 ° S. These data are used to map the broad radar characteristics of the equatorial region on the basis of radar brightness and texture. Seven radar units are defined and are used to assess the geologic character of the equatorial region. These units fall into two distinct classes, those that are radar-bright (35% of the equatorial region) which correspond to highlands and zones of intense tectonic deformation, and radar-dark units, corresponding primarily to plains (65% of the equatorial region). The correspondence between features in the 15 ° region of overlap between the Pioneer Venus and Venera 15/16 images is examined and used to extend units mapped in the northern high latitudes into the equatorial region. On the basis of the distribution of the radar units, properties of RMS slope, reflectivity, the scattering behavior of the surface, and topographic signature, seven physiographic units are mapped in the equatorial region and are identified by increasing complexity as plains (undivided), dark halo plains, upland rises, upland plateaus, interhighland tectonic zones, tectonically segmented linear highlands, and tectonic junctions. The physiographic units are distributed in a nearly continuous interconnecting zone of volcanic rises and tectonic features that extends for nearly 360 ° around the equator of the planet. The distribution of large circular structures interpreted as coronae is also examined and it is concluded that the abundances of the largest structures, diameters greater than 500 km, is less than in the northern high latitudes with a notable absence of smaller coronae. The absence of small coronae may be due to the resolution limit of the Pioneer Venus data since analyses of higher resolution Arecibo and Goldstone imagery suggests that a number of corona-like features not identified in the PV data are present.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci. Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT, Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Global geological map of Venus

The surface area of Venus (∼460×10⁶ km²) is ∼90% of that of the Earth. Using Magellan radar image and altimetry data, supplemented by Venera-15/16 radar images, we compiled a global geologic map of Venus at a scale of 1:10 M. We outline the history of geological mapping of the Earth and planets to illustrate the importance of utilizing the dual stratigraphic classification approach to geological mapping. Using this established approach, we identify 13 distinctive units on the surface of Venus and a series of structures and related features. We present the history and evolution of the definition and characterization of these units, explore and assess alternate methods and approaches that have been suggested, and trace the sequence of mapping from small areas to regional and global scales. We outline the specific defining nature and characteristics of these units, map their distribution, and assess their stratigraphic relationships. On the basis of these data, we then compare local and regional stratigraphic columns and compile a global stratigraphic column, defining rock-stratigraphic units, time-stratigraphic units, and geological time units. We use superposed craters, stratigraphic relationships and impact crater parabola degradation to assess the geologic time represented by the global stratigraphic column. Using the characteristics of these units, we interpret the geological processes that were responsible for their formation. On the basis of unit superposition and stratigraphic relationships, we interpret the sequence of events and processes recorded in the global stratigraphic column. The earliest part of the history of Venus (Pre-Fortunian) predates the observed surface geological features and units, although remnants may exist in the form of deformed rocks and minerals. We find that the observable geological history of Venus can be subdivided into three distinctive phases. The earlier phase (Fortunian Period, its lower stratigraphic boundary cannot be determined with the available data sets) involved intense deformation and building of regions of thicker crust (tessera). This was followed by the Guineverian Period. Distributed deformed plains, mountain belts, and regional interconnected groove belts characterize the first part and the vast majority of coronae began to form during this time. The second part of the Guineverian Period involved global emplacement of vast and mildly deformed plains of volcanic origin. A period of global wrinkle ridge formation largely followed the emplacement of these plains. The third phase (Atlian Period) involved the formation of prominent rift zones and fields of lava flows unmodified by wrinkle ridges that are often associated with large shield volcanoes and, in places, with earlier-formed coronae. Atlian volcanism may continue to the present. About 70% of the exposed surface of Venus was resurfaced during the Guineverian Period and only about 16% during the Atlian Period. Estimates of model absolute ages suggest that the Atlian Period was about twice as long as the Guineverian and, thus, characterized by significantly reduced rates of volcanism and tectonism. The three major phases of activity documented in the global stratigraphy and geological map, and their interpreted temporal relations, provide a basis for assessing the geodynamical processes operating earlier in Venus history that led to the preserved record.     

Scientific goals for the observation of Venus by VIRTIS on ESA/Venus express mission

The Visible and Infrared Thermal Imaging Spectrometer (VIRTIS) on board the ESA/Venus Express mission has technical specifications well suited for many science objectives of Venus exploration. VIRTIS will both comprehensively explore a plethora of atmospheric properties and processes and map optical properties of the surface through its three channels, VIRTIS-M-vis (imaging spectrometer in the 0.3–1 μm range), VIRTIS-M-IR (imaging spectrometer in the 1–5 μm range) and VIRTIS-H (aperture high-resolution spectrometer in the 2–5 μm range). The atmospheric composition below the clouds will be repeatedly measured in the night side infrared windows over a wide range of latitudes and longitudes, thereby providing information on Venus's chemical cycles. In particular, CO, H₂O, OCS and SO₂ can be studied. The cloud structure will be repeatedly mapped from the brightness contrasts in the near-infrared night side windows, providing new insights into Venusian meteorology. The global circulation and local dynamics of Venus will be extensively studied from infrared and visible spectral images. The thermal structure above the clouds will be retrieved in the night side using the 4.3 μm fundamental band of CO₂. The surface of Venus is detectable in the short-wave infrared windows on the night side at 1.01, 1.10 and 1.18 μm, providing constraints on surface properties and the extent of active volcanism. Many more tentative studies are also possible, such as lightning detection, the composition of volcanic emissions, and mesospheric wave propagation.     

The frequency-area distribution of volcanic units on Venus: Implications for planetary resurfacing

The areas of volcanic units on Venus have been measured on the 1:5000000 geological maps published by NASA/USGS. These data were used to obtain a frequency-area distribution. The cumulative frequency-area distribution of 1544 specific occurrence of units cover six orders of magnitude from the largest unit (30 × 10⁶ km²) to the smallest (20 km²). The probability distribution function has been calculated. The medium and large volcanic units correlate well with a power-law (fractal) relation for the dependence of frequency on area with a slope of −1.83. There are fewer small units than the expected values provided by the power-law relation. Our measurements cover 21.02% of the planetary surface, 3.59% of the study area was found to be tessera terrain and is excluded from this study of volcanism. The measurements were restricted to areas where geological maps have been published. The analysis was performed on two independent areas of the planet, with a complete coverage of published maps. In both areas the largest volcanic unit covers a significant portion of the surface (58.75% and 63.64%, respectively). For the total measured volcanic units (excluding tessera), these two largest units (that could correspond to the same unit or not) cover the 61.18% and they are stratigraphically superimposed on older volcanic units which cover 3.37% of the area. The remaining area (35.45%) is occupied by younger volcanic units stratigraphically superimposed on the large volcanic unit(s). These results are based on the independent mapping of a large number of geologists with different ideas about the geodynamical evolution of Venus and different criteria for geological mapping. Despite this fact, the presence of these very large units is incompatible with the equilibrium resurfacing models, because their generation at different ages would destroy the crater randomness. Our frequency-area distribution of the mapped volcanic units supports a catastrophic resurfacing due to the emplacement of the largest unit(s) followed by a decay of volcanism. Our data for the frequency-area distribution of volcanic units provide new support for catastrophic resurfacing models. It is difficult to make our observations compatible with equilibrium, steady-state resurfacing models.     

The nature of terrains of different types on the surface of Venus and selection of potential landing sites for a descent probe of the <Emphasis Type="Italic">Venera-D</Emphasis> Mission

We discuss a change in the resurfacing regimes of Venus and probable ways of forming the terrain types that make up the surface of the planet. The interpretation of the nature of the terrain types and their morphologic features allows us to characterize their scientific priority and the risk of landing on their surface to be estimated. From the scientific point of view, two terrain types are of special interest and represent easily achievable targets: the lower unit of regional plains and the smooth plains associated with impact craters. Regional plains are probably a melting from the upper fertile mantle. The material of smooth plains of impact origin is a well-mixed and representative sample of the Venusian crust. The lower unit of regional plains is the most widespread one on the surface of Venus, and it occurs within the boundaries of all of the precalculated approach trajectories of the lander. Smooth plains of impact origin are crossed by the approach trajectories precalculated for 2018 and 2026.