Arcanite from Fumarole Exhalations of the Tolbachik Volcano (Kamchatka,Russia) and Its Crystal Structure

The crystal structure (R = 0.0194) of arcanite β-K₂SO₄ was studied on a single crystal from exhalations of the Arsenatnaya fumarole, Tolbachik Volcano (Kamchatka, Russia). The mineral crystallizes at a temperature of ≥350–430°C and associates with langbeinite, aphthitalite, hematite, tenorite, johillerite, and others. Arcanite is orthorhombic, Pnma, a = 7.4763(2) Å, b = 5.77262(16) Å, c = 10.0630(3) Å, V = 434.30(2) ų, Z = 4. Its structure contains isolated SO₄ tetrahedra, whereas K cations center ten- and nine-fold polyhedra.     

Crystal chemical characteristics of α-CaSi2O5, a new high pressure calcium silicate with five-coordinated silicon synthesized at 1500°C and 10 GPa

The crystal structure of α-CaSi₂O₅ synthesized at conditions of 1500°C and 10 GPa, has been solved and refined in centrosymmetric space group P , using single crystal X-ray diffraction data. The composition (Z=4) and unit cell are Ca_1.02Si_1.99O₅ by EPMA analysis and a=7.243(2) Å, b=7.546(4) Å, c=6.501(4) Å, α=81.43(5)°, β=84.82(4)°, γ=69.60(3)°, V=329.5(3) ų, yielding the density value, 3.55 g/cm³. The structure is closely related to that of titanite, CaTiSiO₅ and features the square-pyramid five-fold coordination of silicon by oxygen. The ionic radius for five-coordinated Si calculated from the bond distances is 0.33 Å. The substantial deviation of valence sum for Ca indicates the existence of local strain and the instability of α-CaSi₂O₅ at room pressure.     

Avdoninite,K<Subscript>2</Subscript>Cu<Subscript>5</Subscript>Cl<Subscript>8</Subscript>(OH)<Subscript>4</Subscript> · H<Subscript>2</Subscript>O,a new mineral species from volcanic exhalations and the technogenic zone at volcanic-hosted massive sulfide deposits

Avdoninite, a new mineral species, has been found together with euchlorite, paratacamite, atacamite, belloite, and langbeinite hosted in exhalation sediments of the Yadovitaya fumarole in the Second Cinder Cone at the Northern Breach of the Great Fissure Tolbachik Eruption, Tolbachik volcano, Kamchatka Peninsula, Russia. Avdoninite occurs as imperfect, short prismatic and thick tabular crystals up to 0.2 mm long, with (001) and (100) forms, crystal aggregates, and pseudomorphs (together with atacamite) after melanothallite observed. The new mineral is brittle, with the Mohs hardness 3 (for aggregates). Density is 3.03 g/cm³ (meas.) and 3.066 g/cm³ (calc.). Avdoninite is biaxial and optically neutral, with α = 1.669, β = 1.688, γ = 1.707, 2V = ?90°. Dispersion is not observed. Optical orientation: Y = c, X = b? Pleochroism is absent. The infrared spectrum suggests the presence of water molecules in avdoninite. Electron microprobe chemical analysis has given (wt %) K₂O 11.94 (±0.4), CuO 51.43 (±0.7), Cl 37.07 (±0.6), H₂O (determined by the Penfield method) 6.9, ?O=Cl₂ ?8.37, total 98.97. The empirical formula is K_1.96Cu_5.00Cl_8.09(OH)_3.87. · 1.03H₂O. Avdoninite is monoclinic, space group P2/m, P2, or Pm; a = 24.34(2) Å, b = 5.878(4) Å, c = 11.626(5) Å, β = 93.3(1)°, V = 1660.6(20) ų, Z = 4. The compatibility index is good: 1 ? K _p/K _c = 0.056 for D _calc and 0.044 for D _meas. The strongest lines in the X-ray powder diffraction pattern (d, Å (I, %) (hkl)) are 11.63(100)(001), 5.88(20)(010), 5.80(27)(002), 5.73(17)(\(\overline 1 \)02), 2.518(19)(21\(\overline 4 \)), 2.321(17)(005). Avdoninite is identical to a technogenic analogue previously described from the Blyava volcanic-hosted massive sulfide deposit, Orenburg oblast, Russia. The new mineral is named after Vladimir Nikolaevich Avdonin (born 1925), a senior researcher of the Ural Geological Museum of the Ural State Mining University. The type material of avdoninite from Kamchatka is deposited in the Mineralogical Museum of the Department of Mineralogy, St. Petersburg State University, St. Petersburg, Russia. The registration number is 19175.     

Synthetic Mn3+-kyanite and viridine, (Al2-xMn x 3+ ) SiO5, in the system Al2O3-MnO-MnO2-SiO2

Experiments on the join Al₂SiO₅-“Mn₂SiO₅” of the system Al₂O₃-SiO₂-MnO-MnO₂ in the pressure/temperature range 10–20 kb/900–1050° C with gem quality andalusite, Mn₂O₃, and high purity SiO₂ as starting materials and using /_O2-buffer techniques to preserve the Mn³⁺ oxidation state had following results: At 20 kb/1000°C orange-yellow kyanite mixed crystals are formed. The kyanite solid solubility is limited at about (Al_1.88Mn _0.12 ³⁺ )SiO₅ and, thus, equals approximately that on the join Al₂SiO₅-“Fe₂SiO₅” (Langer and Frentrup, 1973) indicating that there is no Jahn-Teller stabilisation of Mn³⁺ in the kyanite matrix. 5 mole % substitution causes the kyanite lattice constants a _o, b _o, c _o, and V _o to increase by 0.015, 0.009, 0.014 Å, and 1.6 ų, resp., while α, β, γ, remain unchanged. Between 10 and 18 kb/900°C, Mn³⁺-substituted, strongly pleochroitic (emeraldgreen-yellow) andalusite_ss (viridine) was obtained. At 15 kb/900°C, the viridine compositional range is about (Al_1.86Mn _0.14 ³⁺ )SiO₅-(Al_1.56Mn _0,44 ³⁺ )SiO₅. Thus, Al→Mn³⁺ substitutional degrees are appreciably higher in andalusite than in kyanite, proving a strong Jahn-Teller effect of Mn³⁺ in the andalusite structure, which stabilises this structure type at the expense of kyanite and sillimanite and, thus, enlarges its PT-stability range extremely. 17 mole % substitution cause the andalusite constants a _o, b _o, c _o, and V _o to increase by 0.118, 0.029, 0.047 Å and 9.4 ų, resp. At “Mn₂SiO₅”-contents smaller than about 7 mole %, viridine coexists with Mn-poor kyanite. At “Mn₂SiO₅”-concentrations higher than the maximum kyanite or viridine miscibility, braunite (tetragonal, ideal formula Mn²⁺Mn³⁺[O₈/Si0₄]), pyrolusite and SiO₂ were found to coexist with the Mn³⁺-saturated ky _ss or and _ss, respectively. In both cases, braunites were Al-substituted (about 1 Al for 1 Mn³⁺). Pure synthetic braunites had the lattice constants a _o 9.425, c _o, 18.700 Å, V _o 1661.1 ų (ideal compn.) and a _o 9.374, c _o 18.593 ų, V _o 1633.6 ų (1 Al for 1 Mn³⁺). Stable coexistence of the Mn²⁺-bearing phase braunite with the Mn⁴⁺-bearing phase pyrolusite was proved by runs in the limiting system MnO-MnO₂-SiO₂.     

Crystal chemistry of selenates with mineral-like structures: VIII. Butlerite chains in the structure of K(UO<Subscript>2</Subscript>)(SeO<Subscript>4</Subscript>)(OH)(H<Subscript>2</Subscript>O)

A new potassium uranyl selenate compound K(UO₂)(SeO₄)(OH)(H₂O) has been synthesized for the first time using the technique of evaporation from water solution. Its crystal structure has been solved by direct methods (monoclinic, P2₁/c,a = 8.0413(9) Å, b = 8.0362(9) Å, c = 11.6032(14) Å, β = 106.925(2)°, V = 717.34(14) ų) and refined to R ₁ = 0.0319 (wR ₂ = 0.0824) for 1285 reflections with |F ₀| > 4σ _F . The structure consists of [(UO₂(SeO₄)(OH)(H₂O)]^? chains extending along axis b. In the chains, the uranyl pentagonal bipyramids are linked via bridged hydroxyl anions and tetrahedral oxoanions [SeO₄]^2?. Potassium ions are situated between these chains. No chains of that type have been observed in uranyl compounds earlier, but they had been detected in the structures of butlerite, parabutlerite, uklonskovite, fibroferrite, and a number of synthetic compounds.     

X-Ray radial distribution function analysis of acid volcanic glasses from the Eastern Rhodopes,Bulgaria

Five natural acid volcanic glasses (perlites) from the Eastern Rhodope mountains, Bulgaria, have been studied by X-ray diffraction. The quantity of the microlites varies from 1–3.5 weight percent. It is higher in the glasses from the rhyolite-perlite transition zone. Total pair correlation functions have been calculated for three of the glasses with less than 2 weight percent microlites. All total pair correlation functions are quite similar and have six well defined peaks up to 8 Å. Beyond 8 Å they are practically featureless. The general form of the curves and peak positions suggests that the short-range order in all the three glasses is compatible with a 6-membered tetrahedral ring polymerization scheme with some contribution of fourmembered rings. The T-01 (T=Si, Al) distance shows linear correlation with the weight percent ratio Al₂O₃/SiO₂. The averaged first nearest neighbour distances T-01, O-01 and T-T1 are 1.615±0.005 Å, 2.66±0.02 Å and 3.16±0.02 Å, respectively. The mean T-O-T bond angle is 157±4°. Energy minimization and topology considerations of the possible distribution of different tetrahedral rings are discussed.     

Xitieshanite—A new ferric sulphate mineral

Xitieshanite is a new ferric sulfate mineral discovered in the oxidation zone of a Pb-Zn deposit at Xitieshan, Qinghai Province, China. The typical crystal of xitieshanite is a rhombic rectangle. It is bright green in colour with a light yellow tint. Luster vitrous Translucent to almost transparent. Streak yellow. Cleavage imperfect. Fracture uneven or conchoidal. H. (Vickers)=62.6kg/mm². Specific gravity=1.99_obs(2.02_calc,) Pleochroism strong, and axial colours: X=colourless to pale yellow, Y=pale yellow, Z=light yellow with greenish tint. It is optically positive, biaxial, 2V=77°,r v. Refractive indices:N _x =1.536,N _y =1.570,N _z =1.628. Extinction parallel and inclined. Elongation positive and negative. X-ray single-crystal study shows it is monoclinic. Space groupP2₁/a. Unit cell parameters:a=14.102,b=6.908,c=10.673 Å, β=111.266°,V=968.9, ų,Z=4. The powder pattern of xitieshanite gave the strongest lines: 6.67(6)(201), 6.09(5)(110), 5.69(5)(011), 4.96(10)(002), 4.81(10)(211), 4.21(5)(112), and 3.90(9)(211). Chemical analysis gave Al₂O₃ 0.01, Fe₂O₃ 26.15, FeO 0.18, MgO 0.03, CaO 0.09, K₂O 0.03, Na₂O 0.07, SO₃ 27.69, H₂O 45.02, total 99.27%, corresponding to the chemical formula: Fe²⁺ (SO₄)(OH) · 7H₂O. The DTA curve shows respectively three strong endothermic peaks at 85°, 170°, and 735°C, and a weak peak at 460°C. The TGA curve shows a loss of weight in three different steps. The infrared spectral curve of xitieshanite demonstrates that it has two principal absorption bands at 3,350 and 1,225–1,003 cm^?1 and two subordinate bands at 1,620 and 603 cm^?1.     

Raman scattering and lattice vibrations of Ni2SiO4 spinel at elevated temperature

Raman spectra of Ni₂SiO₄ spinel (O _h ⁷ Z=8) have been measured in the temperature range from 20 to 600 °C and the Raman active vibrations (A _1g +E _g +3F _2g ) have been assigned. A calculation of the optically active lattice vibrations of this spinel has been made, assuming a potential function which combines general valence and short range force constants. The values of the force constants at 20 and 500 °C have been calculated from the vibrational frequencies of the observed Raman spectra and infrared (IR) spectral data. The Ni spinel at 20 °C has a prominently small Si-O bond stretching force constant of K(SiO)=2.356 ～ 2.680 md/Å and a large Ni-O bond stretching constant of K(NiO)=0.843 ～ 1.062 md/Å and these force constants at 500 °C decrease to K(SiO)=2.327 ～ 2.494 md/Å and K(NiO)=0.861 ～ 0.990 md/Å. The Si-O bond is noticeably weakened at high temperatures, despite the small thermal expantion from 1.657 Å (20 °C) to 1.660 Å (500 °C). These changes of the interatomic force constants of the spinel at high temperatures are in accord with the thermal structure changes observed by X-ray diffraction study. The weakened Si-O bond is consistent with the fact that Si atoms in the spinel lattice can diffuse at significant rates at elevated temperature.     

Refinement of the mangan-neptunite crystal structure

The crystal structure of mangan-neptunite, a manganese analogue of neptunite, has been refined in two space groups (Cc and C2/c). The mineral is monoclinic, with the correct space group Cc; the unit-cell dimensions are: a = 16.4821(6), b = 12.5195(4), c = 10.0292(3) Å, β = 115.474(1)°, and V = 1868.31 ų. The crystal structure has been refined to R ₁ = 0.0307 (wR ₂ = 0.0901) on the basis of 4892 observed reflections with |F _hkl | ≥ 4σ|F _hkl |. The most plausible acentric model is caused by the Ti- and (Fe, Mn, Mg)-ordering in the structure. Ti-octahedrons are strongly distorted and consist of short bond Ti-O (1.7 Å), one long bond (2.2 Å), and four equal bonds (2.0 Å). Fe-octahedrons are regularly shaped, with all Fe-O bonds being approximately identical.     

Avdoninite: New data,crystal structure and refined formula K<Subscript>2</Subscript>Cu<Subscript>5</Subscript>Cl<Subscript>8</Subscript>(OH)<Subscript>4</Subscript> · 2H<Subscript>2</Subscript>O

The paper reports new findings of avdoninite from deposits of active fumaroles in the Second Scoria Cone at the Northern Breach of the Great Fissure Tolbachik Eruption, Tolbachik Volcano, Kamchatka Peninsula, Russia. The crystal structure of the mineral has been determined for the first time, which has allowed reliable determination of its space group and unit cell dimensions, refinement of its formula K₂Cu₅-Cl₈(OH)₄ · 2H₂O, and correct indexing of its X-ray powder diffraction pattern. Avdoninite is monoclinic, space group P2₁/c, a = 11.592(2), b = 6.5509(11), c = 11.745(2) Å, β = 91.104(6)°, V = 891.8(3) ų, Z = 2. The crystal structure of this mineral has been determined on a single crystal R ₁ [F > 4σ (F)] = 0.063. It is based on sheets of copper–oxo-chloride complexes [Cu₅Cl₈(OH)₄]^2– parallel to (100). The K⁺ cation and H₂O molecules are interlayers.     

The crystal structure and thermal expansion tensor of MgSO<Subscript>4</Subscript>–11D<Subscript>2</Subscript>O(meridianiite) determined by neutron powder diffraction

We have collected high-resolution neutron powder diffraction patterns from MgSO₄·11D₂O over the temperature range 4.2–250 K. The crystal is triclinic, space-group \( \text{P} \bar{1} \) (Z = 2) with a = 6.72746(6) Å, b = 6.78141(6) Å, c = 17.31803(13) Å, α = 88.2062(6)°, β = 89.4473(8)°, γ = 62.6075(5)°, and V = 701.140(6) ų at 4.2 K, and a = 6.75081(3) Å, b = 6.81463(3) Å, c = 17.29241(6) Å, α = 88.1183(3)°, β = 89.4808(3)°, γ = 62.6891(3)°, and V = 706.450(3) ų at 250 K. Structures were refined to wRp = 3.99 and 2.84% at 4.2 and 250 K, respectively. The temperature dependence of the lattice parameters over the intervening range have been fitted with a modified Einstein oscillator model which was used to obtain the coefficients of the thermal expansion tensor. The volume thermal expansion, α_V, is considerably smaller than ice Ih at all temperatures, and smaller even than MgSO₄·7D₂O (although ?α_V/?T is very similar for both sulfates); MgSO₄·11D₂O exhibits negative α_V below 55 K (compared to 70 K in D₂O ice Ih and 20 K in MgSO₄·7D₂O) The relationship between the magnitude and orientation of the principal axes of the expansion tensor and the main structural elements are discussed.     

High-pressure phase transitions of CaRhO<Subscript>3</Subscript> perovskite

High-pressure phase transitions of CaRhO₃ perovskite were examined at pressures of 6–27 GPa and temperatures of 1,000–1,930°C, using a multi-anvil apparatus. The results indicate that CaRhO₃ perovskite successively transforms to two new high-pressure phases with increasing pressure. Rietveld analysis of powder X-ray diffraction data indicated that, in the two new phases, the phase stable at higher pressure possesses the CaIrO₃-type post-perovskite structure (space group Cmcm) with lattice parameters: a = 3.1013(1) Å, b = 9.8555(2) Å, c = 7.2643(1) Å, V _m  = 33.43(1) cm³/mol. The Rietveld analysis also indicated that CaRhO₃ perovskite has the GdFeO₃-type structure (space group Pnma) with lattice parameters: a = 5.5631(1) Å, b = 7.6308(1) Å, c = 5.3267(1) Å, V _m  = 34.04(1) cm³/mol. The third phase stable in the intermediate P, T conditions between perovskite and post-perovskite has monoclinic symmetry with the cell parameters: a = 12.490(3) Å, b = 3.1233(3) Å, c = 8.8630(7) Å, β = 103.96(1)°, V _m  = 33.66(1) cm³/mol (Z = 6). Molar volume changes from perovskite to the intermediate phase and from the intermediate phase to post-perovskite are –1.1 and –0.7%, respectively. The equilibrium phase relations determined indicate that the boundary slopes are large positive values: 29 ± 2 MPa/K for the perovskite—intermediate phase transition and 62 ± 6 MPa/K for the intermediate phase—post-perovskite transition. The structural features of the CaRhO₃ intermediate phase suggest that the phase has edge-sharing RhO₆ octahedra and may have an intermediate structure between perovskite and post-perovskite.     

Single-crystal structure and Raman spectroscopy of synthetic titanite analog CaAlSiO<Subscript>4</Subscript>F

Synthetic CaAlSiO₄F, the Al-F analog of titanite, has been investigated using single-crystal synchrotron diffraction experiments at Beamline X06DA (Swiss Light Source, Paul Scherrer Institute, Villigen, Switzerland) and Raman spectroscopy. The presented structural model with 40 parameters was refined against 506 unique reflections to a final R _{o b s} of 0.026 (space group A2/a, a = 6.9120(11), b = 8.5010(10), c = 6.435(2) Å, β = 114.670(11)°, and Z = 4) and exhibits less distorted coordination polyhedra than earlier models from powder data. Vibrational spectra were calculated in harmonic approximation at the Γ point from fully relaxed energy optimisations of the crystal structure, using 3D-periodic density functional theory with Gaussian basis sets and the software CRYSTAL06. The lattice parameters of the fully relaxed structure were in good agreement with the experimental values, with the calculated values 0.8 ± 0.4 % too large; the monoclinic angle was calculated 0.4° too large. The agreement of the calculated Raman frequencies with the observed ones was very good, with standard deviation ±3 cm^?1 and maximum deviations of ±7 cm^?1. Furthermore, a detailed discussion of the atomic displacements associated with each Raman mode is given.     

Structure and crystal chemistry of perovskite-type MgSiO3

Synthetic clinoenstatite (MgSiO₃) has been converted to a single phase with the perovskite structure in complete reactions at approx. 300 kbar in experiments that utilize the laser-heated diamond-anvil pressure apparatus. The structure of this phase after quenching was determined by powder X-ray diffraction intensity measurement to be similar to that of the distorted rare-earth, orthoferrite-type, orthorhombic perovskites, but it is suggested that such distortion from ideal cubic perovskite would diminish at high pressure. The unit cell dimensions and density of perovskite-type MgSiO₃ at ambient conditions (1 bar, 25°C) are a=4.780(1) Å, b=4.933(1) Å, c=6.902(1) Å, V=162.75 ų, and ρ=4.098(1) g/cm³. This phase is 3.1% denser than the isochemical oxide mixture [periclase (MgO)+stishovite (SiO₂)]. The small crystal-field stabilization energy of the cation site in the perovskite structure may play an important role in limiting the high-pressure stability field of perovskites that contain transition metal cations. Approximate calculations of the crystal-field effects indicate that perovskite of pure FeSiO₃ composition may become stable at 400–600 kbar; pressures greater than 800 kbar would be required to stabilize CoSiO₃ or NiSiO₃ perovskite.     

A Stucture—mineralogical Study of Ringwoodite

The powder XRD analysis of ringwoodite(γ-Fe2SiO4),which was synthesized in a II-stage anvil high-pressure capsule,was made,Its unit-cell parameter was calculated:a=8.219A,After the refinements,for several cycles,of the oxygen parameter x and the occupancy rate of Si in octahedron site,i.e.,the iversion degree u,the final result is R=0.077,when x=0.379A and u=27.5%,with the structural formula (Fe1.725 Si0.275)VI(Si0.725Fe0.275)IV O4 and atomic distances(Fe,Si)VI-O=2.022 A and (Si,Fe)IV-O=1.836A,Meanwhile,the Moessbauer spectroscopic analysis of the sample was conducted and the results obtained are in good agreement with those of X-ray structural analysis ,This paper focuses on the phase transformation and the properties of bonds of α－Fe2SiO4→γ-Fe2SiO4.     

Crystal chemistry of selenates with mineral-like structures: VII. The structure of (H<Subscript>3</Subscript>O)[(UO<Subscript>2</Subscript>)(SeO<Subscript>4</Subscript>)(SeO<Subscript>2</Subscript>OH)] and some structural features of selenite-selenates

The crystal structure of a new compound, (H₃O)[(UO₂)(SeO₄)(SeO₂OH)] (monoclinic, P2₁/n, a = 8.6682(19), b = 10.6545(16), c = 9.846(2) Å, β = 97.881(17)°, V = 900.7(3) ų), was solved by direct methods and refined to R ₁ = 0.050. The structure contains two symmetrically different Se atoms. The Se1 site is coordinated by three O atoms as is characteristic of Se⁴⁺ cations. The Se2 site is coordinated by four O atoms and forms selenate anion SeO ₄ ^2? . The structure is based on selenite-selenate sheets [(UO₂)(SeO₄)(SeO₂OH)]^? linked by the interlayer H₃O^? ions. The sheets are parallel to (101). The structure is compared to that of schmiederite, Pb₂Cu₂(SeO₃)(SeO₄)(OH)₄.     

The lattice energy of forsterite. Charge distribution and formation enthalpy of the SiO 4 4− ion

In the lattice energy expression of forsterite, based on a Born-Mayer (electrostatic+repulsive+dispersive) potential, the oxygen charge z _o, the hardness parameter ρ and the repulsive radii r _Mg and r _Si appear as unknown parameters. These were determined by calculating the first and second partial derivatives of the energy with respect to the cell edges, and equalizing them to quantities related to the crystal elastic constants; the overdetermined system of equations was solved numerically, minimizing the root-mean-square deviation. To test the results obtained, the SiO ₄ ^4? ion was assumed to move in the unit-cell, and the least-energy configuration was sought and compared with the experimental one. By combining the two methods, the optimum set of parameters was: z _o=?1.34, ρ=0.27 Å, r _Mg=0.72 Å, r _Si=0.64 Å. The values ?8565.12 and ?8927.28 kJ mol^?1 were obtained, respectively, for the lattice energy E _Land for its ionic component E _L ⁰ ,which accounts for interactions between Mg²⁺ and SiO ₄ ^4? ions only. The charge distribution calculated on the SiO ₄ ^4? ion was discussed and compared with other results. Using appropriate thermochemical cycles, the formation enthalpy and the binding energy of SiO ₄ ^4? were estimated to be: ΔH _f(SiO ₄ ^4? )=2117.6 and E(SiO ₄ ^4? )=708.6 kJ mol^?1, respectively.     

Tinnunculite,C<Subscript>5</Subscript>H<Subscript>4</Subscript>N<Subscript>4</Subscript>O<Subscript>3</Subscript> · 2H<Subscript>2</Subscript>O: Occurrences on the Kola Peninsula and Redefinition and Validation as a Mineral Species

Based on a study of samples found in the Khibiny (Mt. Rasvumchorr: the holotype) and Lovozero (Mts Alluaiv and Vavnbed) alkaline complexes on the Kola Peninsula, Russia, tinnunculite was approved by the IMA Commission on New Minerals, Nomenclature, and Classification as a valid mineral species (IMA no. 2015-02la) and, taking into account a revisory examination of the original material from burnt dumps of coal mines in the southern Urals, it was redefined as crystalline uric acid dihydrate (UAD), C₅H₄N₄O₃ · 2H₂O. Tinnunculite is poultry manure mineralized in biogeochemical systems, which could be defined as “guano microdeposits.” The mineral occurs as prismatic or tabular crystals up to 0.01 × 0.1 × 0.2 mm in size and clusters of them, as well as crystalline or microglobular crusts. Tinnunculite is transparent or translucent, colorless, white, yellowish, reddish or pale lilac. Crystals show vitreous luster. The mineral is soft and brittle, with a distinct (010) cleavage. D_calc = 1.68 g/cm³ (holotype). Tinnunculite is optically biaxial (–), α = 1.503(3), β = 1.712(3), γ = 1.74(1), 2V_obs = 40(10)°. The IR spectrum is given. The chemical composition of the holotype sample (electron microprobe data, content of H is calculated by UAD stoichiometry) is as follows, wt %: 37.5 О, 28.4 С, 27.0 N, 3.8 H_calc, total 96.7. The empirical formula calculated on the basis of (C + N+ O) = 14 apfu is: C_4.99H₈N_4.07O_4.94. Tinnunculite is monoclinic, space group (by analogy with synthetic UAD) P2₁/c. The unit cell parameters of the holotype sample (single crystal XRD data) are a = 7.37(4), b = 6.326(16), c = 17.59(4) Å, β = 90(1)°, V = 820(5) ų, Z = 4. The strongest reflections in the XRD pattern (d, Å–I[hkl]) are 8.82–84[002], 5.97–15[011], 5.63–24[102?, 102], 4.22–22[112], 3.24–27[114?,114], 3.18–100[210], 3.12–44[211?, 211], 2.576–14[024].     

Cation substitution in synthetic meridianiite (MgSO<Subscript>4</Subscript>·11H<Subscript>2</Subscript>O) I: X-ray powder diffraction analysis of quenched polycrystalline aggregates

Meridianiite, MgSO₄·11H₂O, is the most highly hydrated phase in the binary MgSO₄–H₂O system. Lower hydrates in the MgSO₄–H₂O system have end-member analogues containing alternative divalent metal cations (Ni²⁺, Zn²⁺, Mn²⁺, Cu²⁺, Fe²⁺, and Co²⁺) and exhibit extensive solid solution with MgSO₄ and with one another, but no other undecahydrate is known. We have prepared aqueous MgSO₄ solutions doped with these other cations in proportions up to and including the pure end-members. These liquids have been solidified into fine-grained polycrystalline blocks of metal sulfate hydrate + ice by rapid quenching in liquid nitrogen. The solid products have been characterised by X-ray powder diffraction, and the onset of partial melting has been quantified using a thermal probe. We have established that of the seven end-member metal sulfates studied, only MgSO₄ forms an undecahydrate; ZnSO₄ forms an orthorhombic heptahydrate (synthetic goslarite), MnSO₄, FeSO₄, and CoSO₄ form monoclinic heptahydrates (syn. mallardite, melanterite, bieberite, respectively), and CuSO₄ crystallises as the well-known triclinic pentahydrate (syn. chalcanthite). NiSO₄ forms a new hydrate which has been indexed with a triclinic unit cell of dimensions a = 6.1275(1) Å, b = 6.8628(1) Å, c = 12.6318(2) Å, α = 92.904(2)°, β = 97.678(2)°, and γ = 96.618(2)°. The unit-cell volume of this crystal, V = 521.74(1) ų, is consistent with it being an octahydrate, NiSO₄·8H₂O. Further analysis of doped specimens has shown that synthetic meridianiite is able to accommodate significant quantities of foreign cations in its structure; of the order 50 mol. % Co²⁺ or Mn²⁺, 20–30 mol. % Ni²⁺ or Zn²⁺, but less than 10 mol. % of Cu²⁺ or Fe²⁺. In three of the systems we examined, an ‘intermediate’ phase occurred that differed in hydration state both from the Mg-bearing meridianiite end-member and the pure dopant end-member hydrate. In the case of CuSO₄, we observed a melanterite-structured heptahydrate at Cu/(Cu + Mg) = 0.5, which we identify as synthetic alpersite [(Mg_0.5Cu_0.5)SO₄·7H₂O)]. In the NiSO₄- and ZnSO₄-doped systems we characterised an entirely new hydrate which could also be identified to a lesser degree in the CuSO₄- and the FeSO₄-doped systems. The Ni-doped substance has been indexed with a monoclinic unit-cell of dimensions a = 6.7488(2) Å, b = 11.9613(4) Å, c = 14.6321(5) Å, and β = 95.047(3)°, systematic absences being indicative of space-group P2₁/c with Z = 4. The unit-cell volume, V = 1,176.59(5) ų, is consistent with it being an enneahydrate [i.e. (Mg_0.5Ni_0.5)SO₄·9H₂O)]. Similarly, the new Zn-bearing enneahydrate has refined unit cell dimensions of a = 6.7555(3) Å, b = 11.9834(5) Å, c = 14.6666(8) Å, β = 95.020(4)°, V = 1,182.77(7) ų, and the new Fe-bearing enneahydrate has refined unit cell dimensions of a = 6.7726(3) Å, b = 12.0077(3) Å, c = 14.6920(5) Å, β = 95.037(3)°, and V = 1,190.20(6) ų. The observation that synthetic meridianiite can form in the presence of, and accommodate significant quantities of other ions increases the likelihood that this mineral will occur naturally on Mars—and elsewhere in the outer solar system—in metalliferous brines.     

The thermal expansion and crystal structure of mirabilite (Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>·10D<Subscript>2</Subscript>O) from 4.2 to 300 K,determined by time-of-flight neutron powder diffraction

We have collected high resolution neutron powder diffraction patterns from Na₂SO₄·10D₂O over the temperature range 4.2–300 K following rapid quenching in liquid nitrogen, and over a series of slow warming and cooling cycles. The crystal is monoclinic, space-group P2₁/c (Z = 4) with a = 11.44214(4) Å, b = 10.34276(4) Å, c = 12.75486(6) Å, β = 107.847(1)°, and V = 1436.794(8) Å³ at 4.2 K (slowly cooled), and a = 11.51472(6) Å, b = 10.36495(6) Å, c = 12.84651(7) Å, β = 107.7543(1)°, V = 1460.20(1) Å³ at 300 K. Structures were refined to R _P (Rietveld powder residual, \( R_{P} = {{\sum {\left| {I_{\text{obs}} - I_{\text{calc}} } \right|} } \mathord{\left/ {\vphantom {{\sum {\left| {I_{\text{obs}} - I_{\text{calc}} } \right|} } {\sum {I_{\text{obs}} } }}} \right. \kern-\nulldelimiterspace} {\sum {I_{\text{obs}} } }} \)) better than 2.5% at 4.2 K (quenched and slow cooled), 150 and 300 K. The sulfate disorder observed previously by Levy and Lisensky (Acta Cryst B34:3502–3510, 1978) was not present in our specimen, but we did observe changes with temperature in deuteron occupancies of the orientationally disordered water molecules coordinated to Na. The temperature dependence of the unit-cell volume from 4.2 to 300 K is well represented by a simple polynomial of the form V = ? 4.143(1) × 10^?7 T ³ + 0.00047(2) T² ? 0.027(2) T + 1437.0(1) Å³ (R ² = 99.98%). The coefficient of volume thermal expansion, α _V , is positive above 40 K, and displays a similar magnitude and temperature dependence to α _V in deuterated epsomite and meridianiite. The relationship between the magnitude and orientation of the principal axes of the thermal expansion tensor and the main structural elements are discussed; freezing in of deuteron disorder in the quenched specimen affects the thermal expansion, manifested most obviously as a change in the behaviour of the unit-cell parameter β.