Thermo‐mechanical interaction of a large impact melt sheet with adjacent target rock,Sudbury impact structure,Canada

The 1.85 Ga Sudbury Igneous Complex (SIC) and its thermal aureole are unique on Earth with regard to unraveling the effects of a large impact melt sheet on adjacent target rocks. Notably, the formation of Footwall Breccia, lining the basal SIC, remains controversial and has been attributed to impact, cratering, and postcratering processes. Based on detailed field mapping and microstructural analysis of thermal aureole rocks, we identified three distinct zones characterized by static recrystallization, incipient melting, and crystallization textures. The temperature gradient in the thermal aureole increases toward the SIC and culminates in a zone of partial melting, which correlates spatially with the Footwall Breccia. We therefore conclude that assimilation of target rock into initially superheated impact melt and simultaneous deformation after cratering strongly contributed to breccia formation. Estimated melt fractions of the Footwall Breccia amount to 80 vol% and attest to an extreme loss in mechanical strength and, thus, high mobility of the Breccia during assimilation. Transport of highly mobile Footwall Breccia material into the overlying Sublayer Norite of the SIC and vice versa can be attributed to Raleigh–Taylor instability of both units, long‐term crater modification caused by viscous relaxation of crust underlying the Sudbury impact structure, or both.     

The South Range Breccia Belt of the Sudbury Impact Structure: A possible terrace collapse feature

Abstract— The South Range Breccia Belt (SRBB) is an arcuate, 45 km long zone of Sudbury Breccia in the South Range of the 1.85 Ga Sudbury Impact Structure. The belt varies in thickness between tens of meters to hundreds of meters and is composed of a polymict assemblage of Huronian Supergroup (2.49–2.20 Ga), Nipissing Diabase (2.2 Ga), and Proterozoic granitoid breccia fragments ranging in size from a few millimeters to tens of meters. The SRBB matrix is composed of a fine‐grained (～100 μm) assemblage of biotite, quartz, and ilmenite, with trace amounts of plagioclase, zircon, titanite, epidote, pyrite, chalcopyrite, pyrrhotite, and occasionally chlorite. The SRBB hosts the Frood‐Stobie, Vermilion, and Kirkwood quartz diorite offset dykes, the former being associated with one of the largest Ni‐Cu‐PGE sulphide deposits in the world. Optical petrography and whole‐rock geochemistry concur with previous studies that have suggested that the matrix of the SRBB is derived from comminution and at least partial frictional melting of the wall rock Huronian Supergroup lithologies. Rare earth element (REE) data from all sampled lithologies associated with the SRBB exhibit crustal signatures when normalized to C1 chondrite values. Additionally, REE data from the quartz diorites, disseminated sulphides in Sudbury Breccia, and a sample of an aphanitic biotite‐hornblende tonalite dyke exhibit flat slopes when compared to the mafic and felsic norites, quartz gabbro, and granophyre units of the Sudbury Igneous Complex (SIC), which suggests that these lithologies are representative of bulk SIC melt. We suggest that the SRBB was formed by high strain‐rate (>1 m/s), gravity‐driven seismogenic slip of the inner ring of the Sudbury Impact Structure during postimpact crustal readjustment (crater modification stage). Failure of the hanging wall may have facilitated the injection of bulk SIC melt into the SRBB, along with the Ni‐Cu‐PGE sulphides of the Frood‐Stobie deposit. Postimpact Penokean (1.9–1.7 Ga) tectonism, particularly northwest‐directed shearing along the South Range Shear Zone and associated thrust faulting, could account for the present subvertical orientation of the SRBB, and the apparent lack of a connection at depth with the SIC.     

The Dhala structure,Bundelkhand craton,Central India—Eroded remnant of a large Paleoproterozoic impact structure

Abstract— The newly discovered Dhala structure, Madhya Pradesh State, India, is the eroded remnant of an impact structure with an estimated present‐day apparent diameter of about 11 km. It is located in the northwestern part of the Archean Bundelkhand craton. The pre‐impact country rocks are predominantly granitoids of ?2.5 Ga age, with minor 2.0–2.15 Ga mafic intrusive rocks, and they are overlain by post‐impact sediments of the presumably >1.7 Ga Vindhyan Supergroup. Thus, the age for this impact event is currently bracketed by these two sequences. The Dhala structure is asymmetrically disposed with respect to a central elevated area (CEA) of Vindhyan sediments. The CEA is surrounded by two prominent morphological rings comprising pre‐Vindhyan arenaceous‐argillaceous and partially rudaceous metasediments and monomict granitoid breccia, respectively. There are also scattered outcrops of impact melt breccia exposed towards the inner edge of the monomict breccia zone, occurring over a nearly 6 km long trend and with a maximum outcrop width of ?170 m. Many lithic and mineral clasts within the melt breccia exhibit diagnostic shock metamorphic features, including multiple sets of planar deformation features (PDFs) in quartz and feldspar, ballen‐textured quartz, occurrences of coesite, and feldspar with checkerboard texture. In addition, various thermal alteration textures have been found in clasts of initially superheated impact melt. The impact melt breccia also contains numerous fragments composed of partially devitrified impact melt that is mixed with unshocked as well as shock deformed quartz and feldspar clasts. The chemical compositions of the impact melt rock and the regionally occurring granitoids are similar. The Ir contents of various impact melt breccia samples are close to the detection limit (1–1.5 ppb) and do not provide evidence for the presence of a meteoritic component in the melt breccia. The presence of diagnostic shock features in mineral and lithic clasts in impact melt breccia confirm Dhala as an impact structure. At 11 km, Dhala is the largest impact structure currently known in the region between the Mediterranean and southeast Asia.     

Empirical and theoretical comparisons of the Chicxulub and Sudbury impact structures

Abstract— Chicxulub and Sudbury are 2 of the largest impact structures on Earth. Research at the buried but well‐preserved Chicxulub crater in Mexico has identified 6 concentric structural rings. In an analysis of the preserved structural elements in the eroded and tectonically deformed Sudbury structure in Canada, we identified ring‐like structures corresponding in both radius and nature to 5 out of the 6 rings at Chicxulub. At Sudbury, the inner topographic peak ring is missing, which if it existed, has been eroded. Reconstructions of the transient cavities for each crater produce the same range of possible diameters: 80–110 km. The close correspondence of structural elements between Chicxulub and Sudbury suggests that these 2 impact structures are approximately the same size, both having a main structural basin diameter of ?150 km and outer ring diameters of ?200 km and ?260 km. This similarity in size and structure allows us to combine information from the 2 structures to assess the production of shock melt (melt produced directly upon decompression from high pressure impact) and impact melt (shock melt and melt derived from the digestion of entrained clasts and erosion of the crater wall) in large impacts. Our empirical comparisons suggest that Sudbury has ?70% more impact melt than does Chicxulub (?31,000 versus ?18,000 km³) and 85% more shock melt (27,000 km³ versus 14,500 km³). To examine possible causes for this difference, we develop an empirical method for estimating the amount of shock melt at each crater and then model the formation of shock melt in both comet and asteroid impacts. We use an analytical model that gives energy scaling of shock melt production in close agreement with more computationally intense numerical models. The results demonstrate that the differences in melt volumes can be readily explained if Chicxulub was an asteroid impact and Sudbury was a comet impact. The estimated 70% difference in melt volumes can be explained by crater size differences only if the extremes in the possible range of melt volumes and crater sizes are invoked. Preheating of the target rocks at Sudbury by the Penokean Orogeny cannot explain the excess melt at Sudbury, the majority of which resides in the suevite. The greater amount of suevite at Sudbury compared to Chicxulub may be due to the dispersal of shock melt by cometary volatiles at Sudbury.     

The Haughton Impact Structure: Summary and Synthesis of the Results of the HISS Project*

Abstract— Surface and subsurface structural studies undertaken under the Haughton impact structure study (HISS) project indicate that the 23 Ma-old Haughton impact structure, (Devon Island, Canadian Arctic) consists of a central basin of uplifted strata, an inner zone of uplifted megablocks at 3.5–5.5 km radius, a complex, faulted annulus of megablocks at 5.5–7.0 km radius and an outer zone of downfaulted blocks. No evidence of a previously suggested structural multi-ring form was found. The geophysical studies suggest an original diameter of 24 km, slightly larger than previous estimates and the seismic data indicate considerably more faulting in the western portion than has been mapped from surface exposures. Detailed studies of the allochthonous breccia deposits found no major radial variations in lithology and shock levels. The only anomaly is the concentration of highly shocked, cobble-sized clasts in the central area coincident with the maximum gravity and magnetic anomalies. It is suggested that this local component is related to the highly shocked rocks of the central uplift and may have been shed from the uplift during late stage adjustments. There is no visible central topographic peak of uplifted bedrock at Haughton but studies of the post-impact Haughton Formation suggest that the center of the structure subsided 300–350 m soon after formation. Breccia studies also indicate the occurrence of shock-melted sediments, including shales, but no evidence of shock melted carbonates, the most common target lithology. This may be ascribed to the ease with which carbonates are volatilized by relatively moderate shock levels. The large amount of volatiles released on impact helped disperse the highly shocked products leading to the formation of a relatively cool clastic and polymict breccia deposit in the interior, as opposed to a coherent melt sheet. In this regard, the breccia deposit is somewhat analogous to the suevite deposits within the Ries crater. Sedimentological studies indicate that the Cretaceous-age Eureka Sound Formation was present at the time of impact and that the Haughton area has undergone as much as 200 m of erosion since the time of impact.     

Impact melt dikes in the Sudbury multi-ring basin (Canada): Implications from uranium-lead geochronology on the Foy Offset Dike

Abstract To investigate the origin of Offset Dikes and their age relationships to major impact generated lithologies in the Sudbury multi-ring impact structure, such as the Main Mass of the Sudbury “Igneous” Complex, zircon and baddeleyite were dated by the U-Pb chronometer. The rocks analysed are one diorite and two quartz diorites from inside the Foy Offset, one quartz diorite from the contact zone, and two country rock samples collected at 10 and 30 m distances from the contact within the Levack Gneiss Complex. The 21 analysed zircon and baddeleyite fractions yield a crystallization age of 1852 +4/-3 (2σ) Ma for the accessory minerals in the Foy Offset Dike and an age of 2635 ± 5 Ma for the shocked Levack country rock, in which zircons show significant shock effects (multiple sets of planar fractures), in contrast to the totally unshocked zircons of the Offset Dike. Within given errors, the new age of 1852 Ma is identical to the pooled 1850 ± 1 Ma U-Pb age determined by Krogh et al. (1984) as the crystallization age of accessory phases in different lithologies of the Sudbury “Igneous” Complex, which has been interpreted to represent the coherent impact melt sheet of the Sudbury Structure. This excellent agreement of the ages substantiates that emplacement of the Offset Dikes occurred coevally with the formation of the impact melt sheet. Total absence of inherited zircons in the central part of the Foy Offset indicates melting of the precursor material at temperatures well above 1700 °C, which emphasizes the origin of the dike lithologies by impact melting.     

The Allochthonous Polymict Breccia Layer of the Haughton Impact Crater,Devon Island,Canada

Abstract— The central allochthonous polymict breccia of the Haughton impact structure is up to about 90 m thick and as much as 7.3 km in radial extent. It has been analyzed with respect to modal composition, grain-size characteristics, and degree of shock metamorphism for the grain-size ranges 10–～ 50, 1–10, 0.03–1, and <0.03 mm. The mineralogy of the breccia matrix is dominated by dolomite and calcite, with minor amounts of quartz, other silicate minerals, and rare melt particles. The following lithic clasts have been identified in the 1–10 mm size fraction (averages of vol.% given in parentheses): dolomitic rocks (51), limestones (29), crystalline rocks (10), sandstones and siltstones (3.7), chert (0.7), melt particles (1.9). The mineral clasts (1–0.03 mm) comprise (with decreasing frequency) dolomite, quartz, calcite, feldspar, biotite, amphibole, garnet, opaques, rounded quartz derived from sandstones and accessory minerals. Lithic and mineral clasts display various degrees of shock. Fragments of crystalline rocks are shocked in the 0–60 GPa range; whole rock melts from the crystalline basement are lacking and unshocked rocks are very rare. In contrast, shock-melted sandstones, shales, and chert were found in most samples. Large clasts of these melt rocks are highly concentrated near the center of the crater. Otherwise, no distinct change of the modal composition with radial range has been observed except that the frequency of limestone clasts increases slightly with radial range. The breccia near the center is more fine-grained than that beyond about 1 km radius and the sorting parameter increases somewhat with radial range. Except for the high concentration of shock-melted sedimentary rocks and highly shocked crystalline rocks near the center of the crater, the distribution of shock stages within the lithic clast population is quite uniform throughout the breccia formation. We conclude that the breccia constituents are derived from the lower part of the target stratigraphy (deeper than about 800 m) and that the total depth of excavation at Haughton is in the order of 2000 m. The mixing of sedimentary rocks of the Eleanor River Formation, Lower Ordovician, and Cambrian (～850 m thickness) with crystalline basement rocks is quite thorough and homogeneous throughout the breccia lens, at least for the analyzed part. This may require an air-borne mode of emplacement for the upper section of the breccia in analogy to the fall-back suevite in the Ries crater. A calculation of the excavation (Z-model) and of the shock pressure attenuation based on reasonable estimates of the energy and crater geometry of the Haughton impact confirms the observed maximum depth of excavation of about 2 km. Shock-melted crystalline basement rocks, if present at all, must be confined to the very center of the structure below the excavation cavity.     

Planar deformation features in quartz from impact‐produced polymict breccia of the Xiuyan crater,China

Abstract– The 1.8 km‐diameter Xiuyan crater is an impact structure in northeastern China, exposed in a Proterozoic metamorphic rock complex. The major rocks of the crater are composed of granulite, hornblendite, gneiss, tremolite marble, and marble. The bottom at the center of the crater covers about 100 m thick lacustrine sediments underlain by 188 m thick crater‐fill breccia. A layer of polymict breccia composed of clasts of granulite, gneiss, hornblendite, and fragments of glass as well as clastic matrix, occurs near the base, in the depth interval from 260 to 295 m. An investigation in quartz from the polymict breccia in the crater‐fill units reveals abundant planar deformation features (PDFs). Quartz with multiple sets of PDFs is found in clasts of granulite that consist of mainly quartz and feldspar, and in fine‐grained matrix of the impact‐produced polymict breccia. A universal stage was used to measure the orientation of PDFs in 70 grains of quartz from five thin sections made from the clasts of granulite of polymict breccia recovered at the depth of 290 m. Forty‐four percent of the quartz grains contain three sets of PDFs, and another 40% contain two sets of PDFs. The most abundant PDFs are rhombohedron forms of , , and with frequency of 33.5, 22.3, and 9.6%, respectively. A predominant PDF form of in quartz suggests a shock pressure >20 GPa. The occurrence of PDFs in quartz from the polymict breccia provides crucial evidence for shock metamorphism of target rocks and confirms the impact origin of this crater, which thus appears to be the first confirmed impact crater in China.     

Floor-fractured crater models of the Sudbury Structure,Canada: Implications for initial crater size and crater modification

Abstract The pattern of radial and concentric offset dikes at Sudbury strongly resembles fracture patterns in certain volcanically modified craters on the Moon. Since the Sudbury dikes apparently formed shortly after the impact event, this resemblance suggests that early endogenic modification at Sudbury was comparable to deformation in lunar floor-fractured craters. Although regional deformation has obscured many details of the Sudbury Structure, such a comparison of Sudbury with lunar floor-fractured craters provides two alternative models for the original size and surface structures of the Sudbury basin. First, the Sudbury date pattern can be correlated with fractures in the central peak crater Haldane (36 km in diameter). This comparison indicates an initial Sudbury diameter of between 100 and 140 km but requires loss of a central peak complex for which there is little evidence. Alternatively, comparison of the Sudbury dikes with fractures in the two-ring basin Schrödinger indicates an initial Sudbury diameter of at least ～ 180 km, which is in agreement with other recent estimates for the size of the Sudbury Structure. In addition to constraining the size and structure of the original Sudbury crater, these comparisons also suggest that crater modification may reflect different deformation mechanisms at different sizes. Most lunar floor-fractured craters are attributed to deformation over a shallow, crater-centered intrusion; however, there is no evidence for such an intrusion at Sudbury. Instead, melts from the evolving impact melt sheet probably entered fractures formed by isostatically-induced flexure of the crater floor. Since most of the lunar floor-fractured craters are too small (<100-km diameter) to induce significant isostatic adjustment, crater modification by isostatic uplift apparently is limited to only the largest of craters, whereas deformation over igneous intrusions dominates the modification of smaller craters.     

Evidence for shock‐induced anhydrite recrystallization and decomposition at the UNAM‐7 drill core from the Chicxulub impact structure

Drill core UNAM‐7, obtained 126 km from the center of the Chicxulub impact structure, outside the crater rim, contains a sequence of 126.2 m suevitic, silicate melt‐rich breccia on top of a silicate melt‐poor breccia with anhydrite megablocks. Total reflection X‐ray fluorescence analysis of altered silicate melt particles of the suevitic breccia shows high concentrations of Br, Sr, Cl, and Cu, which may indicate hydrothermal reaction with sea water. Scanning electron microscopy and energy‐dispersive spectrometry reveal recrystallization of silicate components during annealing by superheated impact melt. At anhydrite clasts, recrystallization is represented by a sequence of comparatively large columnar, euhedral to subhedral anhydrite grains and smaller, polygonal to interlobate grains that progressively annealed deformation features. The presence of voids in anhydrite grains indicates SO_x gas release during anhydrite decomposition. The silicate melt‐poor breccia contains carbonate and sulfate particles cemented in a microcrystalline matrix. The matrix is dominated by anhydrite, dolomite, and calcite, with minor celestine and feldspars. Calcite‐dominated inclusions in silicate melt with flow textures between recrystallized anhydrite and silicate melt suggest a former liquid state of these components. Vesicular and spherulitic calcite particles may indicate quenching of carbonate melts in the atmosphere at high cooling rates, and partial decomposition during decompression at postshock conditions. Dolomite particles with a recrystallization sequence of interlobate, polygonal, subhedral to euhedral microstructures may have been formed at a low cooling rate. We conclude that UNAM‐7 provides evidence for solid‐state recrystallization or melting and dissociation of sulfates during the Chicxulub impact event. The lack of anhydrite in the K‐Pg ejecta deposits and rare presence of anhydrite in crater suevites may indicate that sulfates were completely dissociated at high temperature (T > 1465 °C)—whereas ejecta deposited near the outer crater rim experienced postshock conditions that were less effective at dissociation.     

Steinheim suevite—A first report of melt‐bearing impactites from the Steinheim Basin (SW Germany)

Abstract– The 3.8 km Steinheim Basin in SW Germany is a complex impact crater with central uplift hosted by a sequence of Triassic to Jurassic sedimentary rocks. It exhibits a well‐preserved crater morphology, intensely brecciated limestone blocks that form the crater rim, as well as distinct shatter cones in limestones. In addition, an impact breccia mainly composed of Middle to Upper Jurassic limestones, marls, mudstones, and sandstones is known from drilling into the impact crater. No impact melt lithologies, however, have so far been reported from the Steinheim Basin. In samples of the breccia that were taken from the B‐26 drill core, we discovered small particles (up to millimeters in size) that are rich in SiO₂ (～50 wt%) and Al₂O₃ (～28 wt%), and contain particles of Fe‐Ni‐Co sulfides, as well as target rock clasts (shocked and unshocked quartz, feldspar, limestone) and droplet‐shaped particles of calcite. The particles exhibit distinct flow structures and relicts of schlieren and vesicles. From the geochemical composition and the textural properties, we interpret these particles as mixed silicate melt fragments widely recrystallized, altered, and/or transformed into hydrous phyllosilicates. Furthermore, we detected schlieren of lechatelierite and recrystallized carbonate melt. On the basis of impactite nomenclature, the melt‐bearing impact breccia in the Steinheim Basin can be denominated as Steinheim suevite. The geochemical character of the mixed melt particles points to Middle Jurassic sandstones (“Eisensandstein” Formation) that crop out at the center of the central uplift as the source for the melt fragments.     

Incipient melt formation and devitrification at the Wanapitei impact structure,Ontario, Canada

Abstract— The Wanapitei impact structure is ～8 km in diameter and lies within Wanapitei Lake, ～34 km northeast of the city of Sudbury. Rocks related to the 37 Ma impact event are found only in Pleistocene glacial deposits south of the lake. Most of the target rocks are metasedimentary rocks of the Proterozoic Huronian Supergroup. An almost completely vitrified, inclusion-bearing sample investigated here represents either an impact melt or a strongly shock metamorphosed, pebbly wacke. In the second, preferred interpretation, a number of partially melted and devitrified clasts are enclosed in an equally highly shock metamorphosed arkosic wacke matrix (i.e., the sample is a shocked pebbly wacke), which records the onset of shock melting. This interpretation is based on the glass composition, mineral relicts in the glass, relict rock textures, and the similar degree of shock metamorphism and incipient melting of all sample components. Boulder matrix and clasts are largely vitrified and preserve various degrees of fluidization, vesiculation, and devitrification. Peak shock pressure of ～50–60 GPa and stress experienced by the sample were somewhat below those required for complete melting and development of a homogeneous melt. The rapid cooling and devitrification history of the analyzed sample is comparable to that reported recently from glasses in the suevite of the Ries impact structure in Germany and may indicate that the analyzed sample experienced an annealing temperature after deposition of somewhere between 650 °C and 800 °C.     

Progressive deformation of feldspar recording low‐barometry impact processes,Tenoumer impact structure,Mauritania

The Tenoumer impact structure is a small, well‐preserved crater within Archean to Paleoproterozoic amphibolite, gneiss, and granite of the Reguibat Shield, north‐central Mauritania. The structure is surrounded by a thin ejecta blanket of crystalline blocks (granitic gneiss, granite, and amphibolite) and impact‐melt rocks. Evidence of shock metamorphism of quartz, most notably planar deformation features (PDFs), occurs exclusively in granitic clasts entrained within small bodies of polymict, glass‐rich breccia. Impact‐related deformation features in oligoclase and microcline grains, on the other hand, occur both within clasts in melt‐breccia deposits, where they co‐occur with quartz PDFs, and also within melt‐free crystalline ejecta, in the absence of co‐occurring quartz PDFs. Feldspar deformation features include multiple orientations of PDFs, enhanced optical relief of grain components, selective disordering of alternate twins, inclined lamellae within alternate twins, and combinations of these individual textures. The distribution of shock features in quartz and feldspar suggests that deformation textures within feldspar can record a wide range of average pressures, starting below that required for shock deformation of quartz. We suggest that experimental analysis of feldspar behavior, combined with detailed mapping of shock metamorphism of feldspar in natural systems, may provide critical data to constrain energy dissipation within impact regimes that experienced low average shock pressures.     

Early modification stage (preresurge) sediment mobilization in the Lockne concentric,marine‐target crater,Sweden

Lockne is a concentric impact structure due to a layered target where weak sediments and seawater covered a crystalline basement. A matrix‐supported, sedimentary breccia is interlayered between the crystalline breccia lens and the resurge deposits in the crater infill. As the breccia is significantly different from the direct impact breccia and the resurge deposit, we propose a separate unit name, Tramsta Breccia, based on the type locality (i.e., the LOC02 drilling at Tramsta). We use granulometry and a novel matrix line‐log method to characterize the sedimentology of the Tramsta Breccia. The obliquity of impact combined with the layered target caused an asymmetric, concentric transient crater, which upon its collapse controlled the deposition of the breccia. On the wide‐brimmed downrange side of the crater where the sedimentary target succession was removed during crater excavation, wide, overturned basement crater ejecta flaps prevented any slumping of exterior sediments. Instead, the sediments most likely originated from the uprange side where the brim was narrow and the basement crater rim was poorly developed, sediment‐rich, and relatively unstable. Here, the water cavity wall remained in closer proximity to the basement crater and, aided by the pressure of the collapsing water wall, unconsolidated black mud would flow back into the crater. The absence of interlayered resurge deposits in the Tramsta Breccia and the evidence for reworking at the contact between the overlying resurge deposits and the Tramsta Breccia indicate that the slumping was a rapid process (<75 s) terminating well before the resurge entered the crater.     

Resurge deposits associated with the shallow marine early Cambrian Vakkejokk impact,north Sweden

The lower Cambrian Vakkejokk Breccia is a proximal ejecta layer from a shallow marine impact. It is exposed for ~7 km along a steep mountainside in Lapland, northernmost Sweden. In its central parts, the layer is up to ~27 m thick. Here the breccia shows a vertical differentiation into (1) a lower subunit consisting of strongly deformed target sediments mixed with up to decameter size, mainly crystalline basement clasts (i.e., lower polymict breccia [LPB]); (2) a middle subunit consisting of a polymict, blocky to gravelly breccia, commonly graded (i.e., graded polymict breccia [GPB]), that, in turn, is sporadically overlain by (3) a few dm thick, sandy bed (i.e., top sandstone [TS]). Previous work interpreted the graded beds as deposited by resurging water during early crater modification. We made three short (<1.35 m) core drillings through the graded beds. The line‐logging technique previously used on cores from other marine‐target craters was complemented by logging of equal‐sized cells in photos made along the cores. Granulometry and clast lithology determinations provide further evidence for the top beds of the breccia being resurge deposits. However, the magnitude of this resurge can only be assessed by future deep core drilling of the infill of the crater hidden below the mountain.     

Shocked quartz grains in the early Cambrian Vakkejokk Breccia,Sweden—Evidence of a marine impact

Here we present a study of the abundance and orientation of planar deformation features (PDFs) in the Vakkejokk Breccia, a proposed lower Cambrian impact ejecta layer in the North‐Swedish Caledonides. The presence of PDFs is widely accepted as evidence for shock metamorphism associated with cosmic impact events and their presence confirms that the Vakkejokk Breccia is indeed the result of an impact. The breccia has previously been divided into four lithological subunits (from bottom to top), viz. lower polymict breccia (LPB), graded polymict breccia (GPB), top sandstone (TS), and top conglomerate (TC). Here we show that the LPB contains no shock metamorphic features, indicating that the material derives from just outside of the crater and represents low‐shock semi‐autochthonous bombarded strata. In the overlying, more fine‐grained GPB and TS, quartz grains with PDFs are relatively abundant (2–5% of the grain population), and with higher shock levels in the upper parts, suggesting that they have formed by reworking of more distal ejecta by resurge of water toward the crater in a marine setting. The absence of shocked quartz grains in the TC indicates that this unit represents later slumps associated with weathering and erosion of the protruding crater rim. Sparse shocked quartz grains (<0.2%) were also found in sandstone beds occurring at the same stratigraphic level as the Vakkejokk Breccia 15–20 km from the inferred crater site. It is currently unresolved whether the sandstone at these distal sites is related to the impact or just contains rare reworked quartz grains with PDFs.     

Tectonic influences on the morphometry of the Sudbury impact structure: Implications for terrestrial cratering and modeling

Abstract— Impact structures developed on active terrestrial planets (Earth and Venus) are susceptible to pre‐impact tectonic influences on their formation. This means that we cannot expect them to conform to ideal cratering models, which are commonly based on the response of a homogeneous target devoid of pre‐existing flaws. In the case of the 1.85 Ga Sudbury impact structure of Ontario, Canada, considerable influence has been exerted on modification stage processes by late Archean to early Proterozoic basement faults. Two trends are dominant: 1) the NNW‐striking Onaping Fault System, which is parallel to the 2.47 Ga Matachewan dyke swarm, and 2) the ENE‐striking Murray Fault System, which acted as a major Paleoproterozoic suture zone that contributed to the development of the Huronian sedimentary basin between 2.45–2.2 Ga. Sudbury has also been affected by syn‐ to post‐impact regional deformation and metamorphism: the 1.9–1.8 Ga Penokean orogeny, which involved NNW‐directed reverse faulting, uplift, and transpression at mainly greenschist facies grade, and the 1.16–0.99 Ga Grenville orogeny, which overprinted the SE sector of the impact structure to yield a polydeformed upper amphibolite facies terrain. The pre‐, syn‐, and post‐impact tectonics of the region have rendered the Sudbury structure a complicated feature. Careful reconstruction is required before its original morphometry can be established. This is likely to be true for many impact structures developed on active terrestrial planets. Based on extensive field work, combined with remote sensing and geophysical data, four ring systems have been identified at Sudbury. The inner three rings broadly correlate with pseudotachylyte (friction melt) ‐rich fault systems. The first ring has a diameter of ?90 km and defines what is interpreted to be the remains of the central uplift. The second ring delimits the collapsed transient cavity diameter at ?130 km and broadly corresponds to the original melt sheet diameter. The third ring has a diameter of ?180 km. The fourth ring defines the suggested apparent crater diameter at ?260 km. This approximates the final rim diameter, given that erosion in the North Range is <6 km and the ring faults are steeply dipping. Impact damage beyond Ring 4 may occur, but has not yet been identified in the field. One or more rings within the central uplift (Ring 1) may also exist. This form and concentric structure indicates that Sudbury is a peak ring or, more probably, a multi‐ring basin. These parameters provide the foundation for modeling the formation of this relatively large terrestrial impact structure.     

The suevite of drill hole Yucatàn 6 in the Chicxulub impact crater

Abstract— The suevite breccia of the Chicxulub impact crater, Yucatàn, Mexico, is more variable and complex in terms of composition and stratigraphy than suevites observed at other craters. Detailed studies (microscope, electron microprobe, SEM, XRF) have been carried out on a noncontinuous set of samples from the drill hole Yucatàn 6 (Y6) located 50 km SW from the center of the impact structure. Three subunits can be distinguished in the suevite: the upper unit is a fine‐grained carbonate‐rich suevite breccia with few shocked basement clasts, mostly altered melt fragments, and formerly melted carbonate material; the middle suevite is a coarse‐grained suevite with shocked basement clasts and altered silicate melt fragments; the lower suevite unit is composed of shocked basement and melt fragments and large evaporite clasts. The matrix of the suevite is not clastic but recrystallized and composed mainly of feldspar and pyroxene. The composition of the upper members of the suevite is dominated by the sedimentary cover of the Yucatàn target rock. With depth in well Y6, the amount of carbonate decreases and the proportion of evaporite and silicate basement rocks increases significantly. Even at the thin section scale, melt phases of different chemistry can be identified, showing that no widespread homogenization of the melt took place. The melt compositions also reflect the heterogeneity of the deep Yucatàn basement. Calcite with characteristic feathery texture indicates the existence of formerly pure carbonate melt. The proportion of carbonate to evaporite clasts is less than 5:1, except in the lower suevite where large evaporite clasts are present. This proportion constrains the amount of CO₂ and SO_X released by the impact event.     

Impactites of the Haughton impact structure,Devon Island,Canadian High Arctic

Abstract— Contrary to the previous interpretation of a single allochthonous impactite lithology, combined field, optical, and analytical scanning electron microscopy (SEM) studies have revealed the presence of a series of impactites at the Haughton impact structure. In the crater interior, there is a consistent upward sequence from parautochthonous target rocks overlain by parautochthonous lithic (monomict) breccias, through allochthonous lithic (polymict) breccia, into pale grey allochthonous impact melt breccias. The groundmass of the pale grey impact melt breccias consists of microcrystalline calcite, silicate impact melt glass, and anhydrite. Analytical data and microtextures indicate that these phases represent a series of impact‐generated melts that were molten at the time of, and following, deposition. Impact melt glass clasts are present in approximately half of the samples studied. Consideration of the groundmass phases and impact glass clasts reveal that impactites of the crater interior contain shock‐melted sedimentary material from depths of >920 to <1880 m in the pre‐impact target sequence. Two principal impactites have been recognized in the near‐surface crater rim region of Haughton. Pale yellow‐brown allochthonous impact melt breccias and megablocks are overlain by pale grey allochthonous impact melt breccias. The former are derived from depths of >200 to <760 m and are interpreted as remnants of the continuous ejecta blanket. The pale grey impact melt breccias, although similar to the impact melt breccias of the crater interior, are more carbonate‐rich and do not appear to have incorporated clasts from the crystalline basement. Thus, the spatial distribution of the crater‐fill impactites at Haughton, the stratigraphic succession from target rocks to allochthonous impactites, the recognition of large volumes of impact melt breccias, and their probable original volume are all analogous to characteristics of coherent impact melt layers in comparatively sized structures formed in crystalline targets.     

The Vakkejokk Breccia: An Early Cambrian proximal impact ejecta layer in the North‐Swedish Caledonides

The ≤27 m thick Vakkejokk Breccia is intercalated in autochthon Lower Cambrian along the Caledonian front north of Lake Torneträsk, Lapland, Sweden. The spectacular breccia is here interpreted as a proximal ejecta layer associated with an impact crater, probably ~2–3 km in size, located below Caledonian overthrusts immediately north of the main breccia section. The impact would have taken place in a shallow‐marine environment ~520 Ma ago. The breccia comprises i) a strongly disturbed lower polymict subunit with occasional, in themselves brecciated, crystalline mega‐clasts locally exceeding 50 m surrounded by contorted sediments; ii) a middle, commonly normally graded, crystalline‐rich, polymict subunit, in turn locally overlain by iii) a thin fine‐grained quartz sandstone, <30 cm thick. The upper sandstone is sporadically either overlain, or replaced, by a conglomerate. In progressively more distal parts of the ejecta layer, the lower subunit is better described as only slightly disturbed strata. The lower subunit is suggested to have formed by ejecta bombardment of the strata surrounding the impact crater, even causing some net outwards mobilization of the sediments. The middle subunit and the uppermost quartz sandstone are considered resurge deposits. The top conglomerate may be caused by subsequent wave reworking and slumping of material from the elevated rim. Quartz grains showing planar deformation features are present in the graded polymict subunit and the upper sandstone, that is, the inferred resurge deposits.