Niveo-aeolian deposits and denivation forms,with special reference to the great Kobuk Sand Dunes,Northwestern Alaska

The geomorphology, lithology and chronostratigraphy of extensive, late Pleistocene inland and river dune sands, aeolian sand sheets (‘cover sands’) and loess deposits of periglacial origin in northwestern Europe are well known. However, the idea that some of these aeolian sediments result from niveo-aeolian processes is still an open question, as no diagnostic sedimentary features have yet been reported. Moreover, actual niveo-aeolian sediments and related denivation forms, reported from various cold-climate regions, are not suitable analogues. Recent observations in active dune fields in northwestern Alaska indicate that interstratification of wind-driven snow and sand preferentially occurs on slip faces of transverse, barchanoid or parabolic dune ridges. Annual denivation forms develop: e.g. snow ramparts, sinkholes, snow hummocks, snow meltwater fans and tensional cracks. The surface consists of a cracked wet sand layer with a dimpled surface and spongy structure. Although the preservation potential of these features is low in this specific case, similar features may be observed in ancient sediments elsewhere and provide useful palaeoclimatic indicators. The niveo-aeolian concept should therefore not specifically be related to late Pleistocene cover sand deposition in northwestern Europe, as previously assumed.     

Origin, development and evolutionary model of shelf desertization environment in late stage of Upper Pleistocene

Based on the study of palaeo-environmental evolution in the shelves of the Eastern China Seas, the concept of “shelf desertization” in the late stage of Upper Pleistocene is defined; the environmental background and evolutionary process of shelf desertization are analysed. Study on the records of subbottom profiling and the data of core samples from shelf areas revealed that during low sea-level stages, the sedimentary environment in the exposed shelf plains was dominated by aeolian depositional process under cold and dry climatic conditions, i.e. under the action of strong winter-monsoon winds. Parts of the exposed marine strata were disintegrated, and aeolian sand dunes were formed on the disintegrated marine deposits, from which the finer sediment grains were blown away by wind and deposited in the downwind areas to form the derivative loess deposits. Thus a desertization environmental system was formed in the exposed shelf plains of the Eastern China Seas.     

风成沉积物磁组构与中国黄土区第四纪风向变化

通过对黄土高原几个剖面黄土样品磁化率各向异性的初步研究，发现了风成沉积物中的磁组构特征，且它的形成受沉积作用控制并与黄土高原形成时的古风场有关，即风成沉积物磁化率椭球体主轴方向及各轴比值与磁性颗粒分布排列方式亦即与空气动力条件相关．阐明了风成沉积物磁组构形成机制及其与古风向的关系，提出一种能够定量研究黄土高原形成时古风场的方法，为研究黄土高原形成演化和第四纪以来气候变化提供了基础数据．     

SAR TT-OSL dating of the loess deposits in the Horqin dunefield (northeastern China)

Palaeoclimatic change in northeastern China during the late Quaternary remains poorly understood. This is partly because of the scarcity of detailed investigations into archives in the region, but especially because of the lack of an appropriate dating method to obtain age control for the area's loess deposits. In this paper, the single-aliquot regenerative-dose (SAR) OSL and thermally transferred OSL (TT-OSL) method have been used to date two typical loess sections (Kulungou and Pingancun) in northeastern China. The results show that the SAR TT-OSL method is suitable for dating the Horqin aeolian sections and suggest that deposition commenced at least since the middle Pleistocene in the Horqin dunefield. A sand layer deposited at about 262 ± 32 ka implies that the dunefield experienced at least one significant period of aridification during the late Quaternary.     

Influence of subaqueous processes on the construction and accumulation of an aeolian sand sheet

In aeolian sand sheets the interaction between aeolian and subaqueous processes is considered one of the principal factors that controls this depositional environment. To examine the role played by the subaqueous processes on the construction and accumulation of sand sheets, surface deposits and subsurface sedimentary sections of a currently active aeolian sand sheet, located in the Upper Tulum Valley (Argentina), have been examined. On the sand sheet surface, airflows enable the construction of nabkhas, wind‐rippled mantles (flattened accumulations of sand forming wind ripples), megaripples, and small transverse dunes. Subaqueous deposits consist of sandy current ripples covered by muddy laminae. The latter are generated by annual widespread but low‐energy floods that emanate from the nearby mountains in the aftermath of episodes of heavy precipitations. Deposits of subaqueous origin constitute 5% of the accumulated sand sheet thickness. The construction of the sand sheet is controlled by meteorological seasonal changes: the source area, the San Juan river alluvial fan, receives sediment by thaw‐waters in spring–summer; in fall–winter, when the water table lowers in the alluvial fan, the sediment is available for aeolian transport and construction of the sand sheet area. The flood events play an important role in enabling sand sheet accumulation: the muddy laminae serve to protect the underlying deposits from aeolian winnowing. Incipient cement of gypsum on the sand and vegetation cover acts as an additional stabilizing agent that promotes accumulation. Episodic and alternating events of erosion and sedimentation are considered the main reason for the absence of soils and palaeosols. Results from this study have enabled the development of a generic model with which to account for: (i) the influence of contemporaneous subaqueous processes on the construction and accumulation in recent and ancient sand sheets; and (ii) the absence of developed soils in this unstable topographic surface. Copyright © 2013 John Wiley & Sons, Ltd.     

Changes in sand fractions of Binggou section and the expansion and contraction of the Tengger desert during 50–30 ka

Signs of the evolutionary process are well preserved in the aeolian deposits of desert margins and enable reconstruction of desert expansion and contraction. The sand content (percentage >63 µm) of loess in the loess–desert transitional zone was used as a proxy indicator for determining the proximity of the desert margin. According to the dominant wind direction, generally NW–SE in the northwest Chinese Loess Plateau, a transect was projected to observe spatial changes in sedimentological characteristics of aeolian deposits during the Last Glacial Period. The transect consists of 12 loess sections, starting at Shapotou in the transitional region between the Loess Plateau and the Tengger Desert and ending at Tianshui, which is located at the north foot of the Western Qinling Mountains in the southernmost part of the Loess Plateau. It shows the properties of temporal and spatial distribution of the Malan loess, with reduced sand content from northwest to southeast. A linear correlation model of sand content and distance was obtained, which was similar to the east of the Chinese Loess Plateau. According to this model, and on the basis of optically stimulated luminescence (OSL) dating from Binggou section, a detailed and quantificational expansion and contraction for the Tengger Desert was established. Copyright © 2006 John Wiley & Sons, Ltd.     

Upper Pleistocene‐Holocene geomorphic changes dictating sedimentation rates and historical land use in the valley system of the Chifeng region,Inner Mongolia,northern China

This study focuses on the late Quaternary landscape evolution in the Chifeng region of Inner Mongolia, China, its relations to the history of the Pleistocene‐Holocene loess accumulation, erosion and redeposition, and their impact on human occupation. Based on 57 optically stimulated luminescence (OSL) ages of loess sediments, fluvial sand and floodplain deposits accumulated on the hill slopes and floodplains, we conclude that during most of the Pleistocene period the region was blanketed by a thick layer of aeolian loess, as well as by alluvial and fluvial deposits. The loess section is divided into two main units that are separated by unconformity. The OSL ages at the top of the lower reddish loess unit yielded an approximate age of 193 ka, roughly corresponding to the transition from MIS 7 to 6, though they could be older. The upper gray loess unit accumulated during the upper Pleistocene glacial phase (MIS 4–3) at a mean accumulation rate of 0·22 m/ka. Parallel to the loess accumulation on top of the hilly topography, active fans were operating during MIS 4–2 at the outlet of large gullies surrounding the major valley at a mean accumulation rate of 0·24 m/ka. This co‐accumulation indicates that gullies have been a long‐term geomorphic feature at the margins of the Gobi Desert since at least the middle Pleistocene. During the Holocene, the erosion of the Pleistocene loess on the hills led to the burial of the valley floors by the redeposited sediments at a rate that decreases from 3·2 m/ka near the hills to 1–0·4 m/ka¹ in the central part of the Chifeng Valley. This rapid accumulation and the frequent shifts of the courses of the river prevented the construction of permanent settlements in the valley floors, a situation which changed only with improved man‐made control of the local rivers from the tenth century AD. Copyright © 2010 John Wiley & Sons, Ltd.     

Aeolian dust transport and deposition over crete and adjacent parts of the mediterranean sea

Monitoring of dust deposition at several stations on Crete over a three year period has shown that the present-day depositional flux is of the order of 10-100 gm⁻² yr⁻¹. Most of the dust deposition takes place during a few annual dust [events] which typically last for 1-3 days. Dust haze episodes are usually associated with southerly or southwesterly winds which transport fine sediment from North Africa. Dust is raised by a wide variety of meteorological conditions which generate strong near-surface winds in the source areas, but major long-range transport events are often associated with cold fronts linked to the passage of deep mid-latitude depressions during winter and spring. Dust haze frequency and deposition rates are highest in western Crete and decrease towards the east, suggesting that transport from Tunisia and neighbouring parts of North Africa is particularly important. The measured rate of dust deposition is well below the minimum level required for loess formation. Deposits which have previously been identified as loess are shown to be uncemented marine marls of Tertiary age. Laboratory analysis of red soils, surface sediments, and bedrock samples has confirmed that many of the soils contain an important aeolian dust component, but it is concluded that a more important source of soil parent material is provided by weathering of local rocks. Many of the soils contain significant amounts of quartz sand which cannot have been transported across the sea from North Africa. Reworking of weathered material and deposited dust is extensive, and is accomplished by both aeolian and fluvial processes. Tectonically-controlled depressions in the mountains and parts of the coastal lowlands have acted as long-term sinks in which a thickness of several metres of sediment and soil has accumulated during the Quaternary.     

Regional grain size variations in aeolian sediments along the transition between Tibetan highlands and north‐western Chinese deserts – the influence of geomorphological settings on aeolian transport pathways

Sediment distribution is investigated applying grain size analysis to 279 surface samples from the transitional zone between high mountains (Qilian Shan) and their arid forelands (Hexi Corridor) in north‐western China. Six main sediment types were classified. Medium scale (10³ m) geomorphological setting is carefully considered as it may play an important role concerning sediment supply and availability. A tripartite distribution of sedimentological landscape units along the mountain to foreland transition is evident. Aeolian sediments (e.g. loess and dune sands) are widespread. They are used to identify aeolian transport pathways. The mU/fS‐ratio (5–11 µm/48–70 µm) among primary loess opposes the two grain size fractions being most sensitive to varying accumulation conditions. The first fraction is attributed to long‐distance transport in high suspension clouds whereas the latter represents local transport in saltation mode. The ratio shows strong correlation with elevation (R² = 0.77). Thus, it indicates a relatively higher far‐traveled dust supply in mountainous areas (>3000 m above sea level [a.s.l.]) compared to the foreland. The contribution of westerlies to high mountain loess deposits is considered likely. Hereby, the influence of the geomorphological setting on grain size composition of aeolian sediments becomes apparent: the contribution from distant dust sources is ubiquitous in the study area. However, the far‐distance contribution may be reduced by the availability of fine sand provided in low topography settings. Plain foreland areas support fine sand deflation from supplying river beds, allowing the formation of sandy loess in foreland areas and intramontane basins. In contrast, high mountain topography inhibits strong sand deflation into loess deposits. Eastern parts of the Hexi Corridor show higher aeolian sand occurrence. In contrast, the western parts are dominated by gravel gobi surfaces. This is attributed to higher sand supply in eastern parts provided by the Badain Jaran Desert and fluvial storages as sand sources. Copyright © 2014 John Wiley & Sons, Ltd.     

Multi-method pIRIR dating of sedimentary sequences at the southern edge of the Gurbantunggut Desert,NW China and its palaeoenvironmental implications

The Gurbantunggut Desert is the second-largest desert in China, located in the westerly-dominated region of north-western China. Previous understanding of palaeoclimate of this desert was mostly based on lake and loess records from the Junggar Basin and Tian Shan Mountains, whilst direct dating of sedimentary records from the desert was very limited. This study applies high-resolution post-infrared infrared stimulated luminescence (pIRIR) dating to three sedimentary profiles at the southern edge of the Gurbantunggut Desert, which contain aeolian sand and water-lain sediments, recording palaeoenvironmental changes at the desert margin since the Last Glacial Maximum (LGM). Different pIRIR dating procedures were applied for samples with different ages. For Holocene-aged samples, a single-aliquot regenerative-dose (SAR) pIRIR procedure based on a three-stepped pIRIR measurement at 110 °C, 140 °C and 170 °C was used, and a standard growth curve (SGC) procedure yields an equivalent dose (D_e) similar to that of the full-SAR procedure; thus, is applicable for accelerating D_e measurement. For samples much older than the Holocene, a multi-aliquot regenerative-dose (MAR) pIRIR procedure based on a three-stepped pIRIR measurement at 150 °C, 200 °C and 250 °C was found to be the optimal dating procedure, because a SAR procedure would yield underestimated ages due to uncorrected initial sensitivity change. pIRIR dating results of the investigated profiles reveal a substantial sand accumulation during the LGM, an intensification of aeolian deposition at ∼12 ka and a wetter depositional environment at ∼10–8 ka. A rapid fluvial deposition is dated at ∼20–19 ka, corresponding to the deglaciation period. The sedimentary records from the desert margin show some correlation with lake and loess records in the same region and suggest a complex response of the desert environment to different climatic factors.     

The upper pleistocene loess of southern Tunisia: A statement

On the Matmata Plateau, the sedimentological characteristics of the peri-desert loess and the interbedded palaeosols (particle-size distribution; chemical and mineralogical composition of major components; trace elements; clay mineral assemblage; heavy mineral assemblage; SEM-examined surficial textures of the quartz and palygorskite grains) show notable homogeneity: they also indicate its allochthonous origins (the main sedimentary source being the Great Eastern Erg), its transport as an aeolian suspension sediment prior to deposition, and moderate pedogenesis acting during deposition. The emplacement of the loess was synchronous with a ‘pluvial’ steppe palaeoenvironment moister than at present, as shown by ¹⁸O and ¹³C data. The palaeosols point to a weak pedogenesis and colluvial and alluvial reworking that were contemporary with the aeolian deposition. ¹⁴C radiometric dating suggests a main period of pluvial dust-fall/loess deposition in the Upper Pleistocene (until 10 000 yr BP) and a shorter one in the Middle Holocene.     

High-frequency polarity swings during the Gauss-Matuyama reversal from Baoji loess sediment

Paleomagnetic records of the Gauss-Matuyama reversal were obtained from two loess sections at Baoji on the Chinese Loess Plateau. Stepwise thermal demagnetization shows two obvious magnetization components. A low-temperature component isolated between 100 and 200–250°C is close to the present geomagnetic field direction, and a high-temperature component isolated above 200–250°C reveals clearly normal, reversed, and transitional polarities. Magnetostratigraphic results of both sections indicated that the Gauss-Matuyama reversal consists of a high-frequency polarity fluctuation zone, but the characteristic remanent magnetization directions during the reversal are clearly inconsistent. Rock magnetic experiments demonstrated that for all the specimens with normal, reversed, and transitional polarities magnetite and hematite are the main magnetic carriers. Anisotropy of magnetic susceptibility indicates that the studied loess sediments have a primary sedimentary fabric. Based on virtual geomagnetic pole latitudes, the Gauss-Matuyama reversal records in the two sections are accompanied by 14 short-lived geomagnetic episodes (15 rapid polarity swings) and 12 short-lived geomagnetic episodes (13 rapid polarity swings), respectively. Our new records, together with previous ones from lacustrine, marine, and aeolian deposits, suggest that high-frequency polarity swings coexist with the Gauss-Matuyama reversal, and that the Gauss-Matuyama reversal may have taken more than 11 kyr to complete. However, we need more detailed analyses of sections across polarity swings during reversals as well as more high-resolution reversal records to understand geomagnetic behavior and inconsistent characteristic remanent magnetization directions during polarity reversals.     

Luminescence chronology of aeolian deposits from the Qinghai Lake area in the Northeastern Qinghai-Tibetan Plateau and its palaeoenvironmental implications

Qinghai Lake, on the northeastern Qinghai-Tibetan Plateau, is the largest extant closed-basin lake in China, and has been the subject of numerous palaeoclimatological and palaeoenvironmental studies. In this study, 32 samples of aeolian sand, loess and palaeosol at six sites, and 1 sample of shoreline deposits underlying aeolian deposits were dated using optically stimulated luminescence (OSL). Where available, OSL ages are in agreement with previously published ¹⁴C ages. Our dating results, in combination with previous published ages on aeolian deposits showed that: (1) The oldest aeolian deposits around Qinghai Lake are in excess of 165 ka. (2) Aeolian deposition then began at ∼14 ka in the Qinghai Lake area. Periods of palaeosol formation occurred at ∼16.9 ka, ∼12.2–11 ka, ∼10–9 ka, ∼5.2–4 ka, and ∼3.9–0.7 ka. (3) The accumulation intervals of palaeosols are generally consistent with drilling-core-based environmental change proxies, indicating that palaeosols were formed during wet periods with higher vegetation cover. (4) A depositional hiatus period of ∼40–50 ka exists between the surface mantle aeolian deposits and underlying gravel deposits. (5) Lake levels during the Holocene did not exceed 3205.2 m elevation (11.8 m above recent lake level of April, 2010).     

Aeolian sand strip mobility and protodune development on a drying beach: examining surface moisture and surface roughness patterns measured by terrestrial laser scanning

Ephemeral aeolian sand strips are commonplace on beaches. Their formation during high energy sand transport events often precedes the development of protodunes and their dynamics present interesting feedback mechanisms with surface moisture patterns. However, due to their temporary nature, little is known of their formation, mobility or the specifics of their interaction with beach surface characteristics. Similarly surface moisture has an important influence on sediment availability and transport in aeolian beach systems, yet it is difficult to quantify accurately due to its inherent variability over both short spatial and temporal scales. Whilst soil moisture probes and remote sensing imagery techniques can quantify large changes well, their resolution over mainly dry sand, close to the aeolian transport threshold is not ideal, particularly where moisture gradients close to the surface are large. In this study we employed a terrestrial laser scanner to monitor beach surface moisture variability during a three and a half hour period after a rain event and investigated relationships between bedform development, surface roughness and surface moisture. Our results demonstrate that as the beach surface dries, sand transport increases, with sediment erosion occurring at the wet/dry surface boundary, and deposition further downwind. This dynamic structure, dependent upon changing surface moisture characteristics, results in the formation of a rippled sand strip and ultimately a protodune. Our findings highlight dynamic mobility relationships and confirm the need to consider transient bedforms and surface moisture across a variety of scales when measuring aeolian transport in beach settings. The terrestrial laser scanner provides a suitable apparatus with which to accomplish this. Copyright © 2010 John Wiley & Sons, Ltd.     

Sedimentary and OSL dating evidence for the development of the present Hobq desert landscape, northern China

The sedimentary sequence and landscape of the Hobq desert was observed through twelve profiles along five N-S sections extending through the entire desert. Aeolian sands were found to overlie the alluvial, diluvial, and lacustrine sediments in this desert. Optically stimulated luminescence (OSL) dating results were obtained from post-IR OSL signals of quartz fractions of sand samples at the bottom of sand dunes and hills by using the Double-SAR protocol. The OSL ages reveal that the latest sand accumulation began around 19 ka in the northwestern part and 9 ka in the eastern part of the Hobq Desert. Around 7 ka, the sand accumulation was strengthened and extended southward and northward 2 ka to develop the present desert landscape. Our study suggests that the aeolian sand accumulation around 19, 9 and 7 ka resulted from the weakening of the Asian summer monsoon over this region. However, the rapid development of the present Hobq desert landscape since 2 ka was likely triggered by human activities in this desert.     

Desert evolution and climatic changes in the Tarim River basin since 12 ka BP

Climatic changes in the Tarim River basin since 12 kaBP were divided into four stages based on the analyses of sedimentary phase, the features of some climatic and environmental biomarks in the sedimentary strata and desert evolution. During the Holocene, cool-dry and temperate-dry climates resulted in apparent alluvial-fluvial and weak aeolian activities. During 10–8 kaBP, the climate was dry and cold, large-scale sand dunes activities led to regional deeert expansion. During the hypsithermal (8–3 kaBP), the climate was dry and warm, shifting sand areas decreased and a lot of sand dunes were fixed along the banks of the Tarim River and its tributaries, lowlands and lakes. As a result, fluvial-alluvial areas increased. Since 3 kaBP, the aeolian activity and sandstorms have been enhancing due to the combined influences of climatic warming and illogicill exploitation of land and water resources. The climate in the Tarim River basin have been persistently dry and alternated by warm and cold periods. Consequently, the sedimentary environments have varied fmm desert steppe to desert, and strongly influenced by periphery mountains and global climatic fluctuations.     

Using quartz grain size and shape analysis to distinguish between aeolian and fluvial deposits in the Dallol Bosso of Niger (West Africa)

Size and Fourier-shape characteristics of quartz sand grains were determined by computerized image analysis in order to distinguish between aeolian and fluvial soil parent materials in the Dallol Bosso in Niger. Factor analysis of grain-size distributions gave four sand end-members that can be related to fluvial transport dynamics operating when the sediments were initially deposited. The medium to fine (and more angular shaped) sand fractions are being reworked by wind. Aeolian deposits were well sorted whereas fluvial deposits were poorly sorted in both size and shape. Although gross-shape characteristics (lower harmonics of Fourier series expansion) indicated a common source rock for all sands, the aeolian sands were well rounded whereas the fluvial sands tended to be more angular (upper harmonics of Fourier series).     

Characteristics of aeolian grain transport over a fluvio-glacial lacustrine braid delta,Lake Tekapo,New Zealand

This paper presents results from one of the few scientific studies to examine the physical characteristics of aeolian sediment transport in an alpine area, where topographically reinforced foehn winds initiate dust storm events. The major objective of this study is to improve knowledge of aeolian processes in mid-latitude alpine regions experiencing extreme wind speeds. Of particular interest is the role of surface characteristics in contributing to the unusually deep saltation layer which is seen to form over fluvio-glacial deposits in the Southern Alps of New Zealand. Sediment was collected at several heights (0ċ5, 1, 2 and 4 m) and locations over a large alpine braided river delta, and standard laboratory techniques used to examine grain size characteristics. An image processing technique was also used to evaluate grain roundness. Grains filtered from the airstream at 0ċ5 m and 1 m above such surfaces were found to display a mean grain size of approximately 300 to 435 μm, resembling grain size characteristics of saltation clouds previously observed in high latitude, cold climate locations, in contrast to desert and prairie environments. Samples collected at 2 and 4 m above the surface were found to consist of 60 to 65 per cent sand-sized material, with some grains exceeding 1–1ċ5 mm in diameter. Grain shape analysis conducted on silt- and clay-sized grains filtered from the airstream above mixed sand and gravel surfaces showed such grains to display an increase in grain roundness with height. This characteristic is thought to reflect the airstream's shape-sorting ability and has important implications with respect to the often observed increase in grain roundness in aeolian deposits with increasing distance from source areas. Namely, if more rounded grains are preferentially carried higher into the airstream and therefore into regions of higher wind speed, they should theoretically be transported further from the entrainment zone before being deposited. The high wind speeds observed, often exceeding 30 m s⁻¹, are seen to transport significantly larger sediment than reported in the literature for desert and prairie environments. In addition, the mixture of grain sizes, and especially the pebble- and cobble-sized clasts that dominate the fluvio-glacial deposits associated with the braided rivers in this mountain region, also appear to increase significantly the trajectory height of saltating sand grains. As a result of these two factors, the depth of the saltation cloud often exceeds 1 m. Observations made in this study therefore highlight the need for field and laboratory aeolian process studies to be extended to examine grain transport over coarse-grained beds during much higher wind velocities than typically reported in the literature. Such studies would provide a valuable insight into aeolian processes in high latitude/altitude environments, such as loess genesis. © 1997 by John Wiley & Sons, Ltd.     

Decadal behaviour of a washover fan,Skallingen Denmark

In this study, the decadal evolution of a washover fan on the west coast of Denmark is examined from its initial generation in 1990 until 2015. Since its inception, the bare and flat washover fan surface has recovered and accreted slowly due to re-activation by overwash during surges and due to aeolian activity and dune formation, stimulated by vegetation growth. The volume of sand on the washover has increased steadily at an average rate of about 23 m³/yr per unit length of shoreline, and a total of 175,000 m³ of sand is now deposited on the fan, while at the same time the shoreline has receded by some 250 m. The evolution can be divided into three stages: 1) An initiation phase when storm surge levels and energetic wave conditions caused a breach in the foredunes and overwash processes formed a washover fan with a relatively low elevation above mean sea level; 2) An initial recovery phase during which waves supplied sand to the fan during frequent overwash activity and winds transported this sand into marginal dunes surrounding the fan; and 3) A later recovery phase when the surface of the fan had accreted to a level where vegetation could survive and trap sediment into new foredune growth across the fan. The rate of accretion has been overall linear but scales with neither annual overwash frequency, nor with aeolian transport potential. Instead, the linear accretion is more closely related to the steady onshore migration of nearshore bars that weld to the beach and provide a sand supply for transfer to the fan. The fan evolution demonstrates the importance of washover fans in preserving barrier resilience during transgressional phases caused by increasing mean sea level. © 2019 John Wiley & Sons, Ltd.     

Response of surface processes to climatic change in the dunefields and Loess Plateau of North China during the late Quaternary

This paper draws on recent optically stimulated luminescence (OSL) dating to evaluate the long‐held assumption that dust accumulation rates in the Loess Plateau and the extent of active aeolian sand in the dunefields to the north have varied together over time, because both are controlled by the strength of the Asian monsoons and also possibly because the dunefields are proximal loess sources. The results show there is little evidence that high rates of loess accumulation coincided with well‐dated episodes of extensive dune activity in the Mu Us, Otindag, and Horqin dunefields, at 11–8 ka and 1–0 ka. Explanations for the apparent lack of coupling include local variation in the trapping of dust and post‐depositional preservation of the loess and dune sediments, in response to varying local environmental conditions. In addition, a substantial portion of the loess may be transported directly from source areas where dust emission has somewhat different climatic and geomorphic controls than aeolian sand activity within the dunefields. The results of this study cast doubt on the use of loess accumulation rate as a palaeoclimatic proxy at millennial timescale. The dunefield and loess stratigraphic records are interpreted as primarily recording changes in effective moisture at a local scale, but the timing of late Quaternary dune activity, along with a variety of other evidence, indicates that moisture changes in many of the drylands of northern China may not be in phase with precipitation in core regions of the Asian monsoons. Copyright © 2011 John Wiley & Sons, Ltd.