共查询到20条相似文献,搜索用时 10 毫秒
1.
- The dynamic buckling of elasto-plastic cylindrical shells under axial fluid-solid impact is investigated theoretically. A simplified liquid- gas- structure model is given to approximately imitate the problem. The basic equation of the structure is derived from a minimum principle in dynamics of elasto-plastic continua at finite deformation, and the flow theory of plasticity is employed. The liquid is incompressible and the gas is compressed adiabatically. A number of numerical results are presented and the characteristics of the buckling behavior under fluid-solid impact are illustrated. 相似文献
2.
Wang Deyu Chen Tieyun
Associate Professor Dept. of Naval Architecture Ocean Engineering Shanghai Jiaotong University Shanghai
Professor Dept. of Naval Architecture Ocean Engineering Shanghai Jiaotong University Shanghai 《中国海洋工程》1995,(1)
- The Bodner-Partom constitutive equation is used to study the viscoplastic torsional bucklingof perfect cylindrical shell. By treating the viscoplastic shell as an orthotropic shell at each moment and neglecting the inertia term, the critical torque is determined from a set of homogeneous linear equations. The strain rate sensitivity is mainly discussed in the present paper. 相似文献
3.
The dynamic torsional buckling and post-buckling of elasto-plastic circular cylindrical shell isstudied.By the usage of the Bodner-Partom constitutive relation,the present visco-plastic problem is treat-ed as an orthotropic elastic problem.Based on the nonlinear large deflection shell therory,the governingdynamic buckling equation is solved by the Runge-Kutta method,and the critical buckling stress is deter-mined by the B-R criterion.The present paper is mainly focused on the imperfection sensitivity,the strainrate sensitivity,and the dynamic post-buckling characters for the shell loaded dynamically with a constantshear strain rate.Numerical results show that the critical shear stress and imperfection sensitivity will in-crease with the increase of strain rate.It is found that the elastic buckling stress is more sensitive toimperfection than the visco-plastic buckling.The present research also reveals some dynamic post-bucklingcharacters for the cylindrical shell,and it is shown that the shell will vibra 相似文献
4.
Zhu Dashan Huang Yuying Cheng Jiangtian
Asso. Prof. Dept. of Mechanics Huazhong University of Science Technology 《中国海洋工程》1991,(1)
A plastic ring-beam model simulating the longitudinal transition zone of submarine pipelines in the buckle propagation is presented. The nonlinear relationships between the buckle propagation pressure and the length of the transition zone and the position parameter of the longitudinal plastic hinge are derived using the energy principle. The related values are obtained by means of solving a set of nonlinear equations. The model conforms better to reality than the ring models for considering the effect of the longitudinal plastic bending of the transition zone. The computations for some stainless steel and aluminium tubes with different geometrical parameters are performed. The results obtained agree better with the experimental results than existing theoretical predictions. 相似文献
5.
为提高耐压柱壳设计效率,设计了耐压柱壳参数化分析流程。研究了有限元分析所涉及的材料属性、载荷施加、边界条件设置等内容,确定了采用弧长法分析耐压柱壳稳定性。利用Python语言对于ABAQUS软件进行了二次开发,利用Isight软件实现了ABAQUS的集成,实现了耐压柱壳有限元分析模型的网格自动划分、自动分析计算等。选择样本点进行参数化分析,利用响应面模型对于样本点进行了拟合,得到了具有较高拟合精度、满足工程需要的近似模型,进行了设计变量的灵敏度分析。研究结果表明:参数化分析流程可实现耐压柱壳的自动分析、近似模型及灵敏度分析,可降低耐压柱壳分析难度,均可提高耐压柱壳设计效率。 相似文献
6.
Shen Huishen
Professor 《中国海洋工程》1996,(4)
- posthuckling analysis is presented for the stilTened cylindrical shell of finite length subjected to combined loading of external liquid pressure and axial compression. The formulations are based on a boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, nonlinear large deflections in the postbuckling range and initial geometrical imperfections of the shell. The "smeared stifl'cner" approach is adopted for the stiffencrs. In the analysis a singular perturbation technique is used (o determine the interactive buckling loads and the postbuckling paths. Numerical examples cover the performance of perfect and imperfect, stringer and ring stiffened cylindrical shells. Typical results arc presented in the dimcnsionless graphical form. 相似文献
7.
采用分枝定界法和序列二次规划方法,对载人潜水器圆柱形耐压壳体的重量最小化进行了研究.设计变量是壳板的厚度、肋骨的型号、间距和数量,讨论了下潜深度、材料几何参数对重量以及其它特征量的影响.算例计算表明,下潜深度越大,屈服极限越高的材料重量减轻越明显.对于大深度而言,选用高屈服极限材料,可以使得材料能够充分利用.文中还对结构重量占排水量比例随深度变化的情况进行了研究. 相似文献
8.
Inelastic buckling of thick-walled circular conical shells under external hydrostatic pressure 总被引:1,自引:0,他引:1
The paper reports on a theoretical and an experimental study into the collapse of three thick-walled circular conical shells, which were tested to failure under external hydrostatic pressure. All three vessels failed by plastic non-symmetric bifurcation buckling. Two theoretical analyses were carried out, both based on the finite element method. One of the theoretical analyses was based on inelastic non-symmetric bifurcation buckling and the other analysis was based on plastic axisymmetric buckling. Both of these theoretical analysis and the experimental observations appeared to indicate that there is a link between plastic non-symmetric bifurcation buckling and plastic axisymmetric buckling. 相似文献
9.
WANG Deyu CHEN Tieyun XIN Guonian
Associate Professor School of Naval Architecture Ocean Engineering Shanghai Jiaotong University 《中国海洋工程》1998,(2)
The impact buckling of a laminated composite bar is investigated in case of one of its endsmoving due to axial impact compression.The governing equations considering the first-order sheardeformation effect are derived by the Hamilton principle and solved by the finite difference method.Thecritical axial shortness is determined by the B-R cirterion.The given example is used to highlight the in-fluences of initial imperfection,impact velocity,stress wave and coupled stiffness.It is found that theunsymmetrically laminated bar has a quite different dynamic buckling behaviour from that of thesymmetrically laminated bar. 相似文献
10.
胶州湾双壳类壳体中的Ca,Mg,Mn,Sr元素组成及影响因素 总被引:1,自引:0,他引:1
探讨影响双壳类元素组成的可能因素,从胶州湾沿岸不同取样点采集黄海近海常见的菲律宾蛤仔(Ruditapesphilippinarum)、褶牡蛎(Oystrea denselamellosa)和紫贻贝(Mytilus galloprovincialis),分别测量了3种壳体的矿物物相类型和壳体中的Ca,Mg,Mn,Sr元素组成。研究表明:3种壳体分别属于文石质、方解石质和混合质壳;Ca,Mn元素含量在菲律宾蛤仔、褶牡蛎和紫贻贝壳体中没有差别,而Mg元素含量在菲律宾蛤仔壳体中含量较低,在褶牡蛎壳体和紫贻贝壳体中含量较高,Sr元素恰好与Mg元素相反。双壳类壳体中元素组成主要受壳体矿物物相类型的制约,而与水体环境要素之间的关系弱。 相似文献
11.
振动时效技术是一种有效消除焊接残余应力、提升构件使用寿命、保证结构尺寸精度的方法。在自升式平台固桩架建造过程中,焊接施工导致其内部产生大量的残余应力,残余应力是导致固桩架精度超差和损伤失效的重要原因之一,它会大幅度降低平台的疲劳寿命,因此,固桩架建造完成后消除其内部残余应力对于平台的使用安全至关重要。本文以一个质量约100 t的固桩架分段为研究对象,采用专门的振动时效设备对固桩架施加激振力,测量振动时效前后主焊缝附近的残余应力水平。通过对比分析发现,振动时效技术可以有效降低固桩架焊接过程中产生的残余应力,达到调整、均化、降低残余应力水平、提高构件尺寸精度稳定性的效果,有利于提升平台的使用寿命。 相似文献
12.
为了探索不同径厚比海底管道的压溃屈曲特性,本文分别采用挪威船级社(Det Norske Veritas,DNV)规范、有限元模拟和深海压力舱模型试验,研究不同径厚比海底管道承载外部水压的能力,并就DNV规范压溃屈曲计算公式对不同径厚比管道的适用性进行了讨论,优化了小径厚比海底管道压溃屈曲的设计方法。研究表明:小径厚比管道的压溃屈曲临界压力对管道径厚比的变化更敏感;DNV规范计算小径厚比管道的压溃屈曲临界压力偏小,在进行深海管道的压溃屈曲设计时,建议采用模型试验结合有限元模拟的方法,计算管道实际可提供的压溃屈曲承载力。 相似文献
13.
Pipes inevitably encounter high ambient pressure and bending moment during the deepwater pipe-laying process,which can lead to elliptical buckling and even deterioration failure.For the safety of pipe-laying operation,available formalas for the pipe stability are established on the basis of the assumption of uniform deformation along the tube length and symmetrical buckling.This method can predict the nonlinear rcsponse of elliptical collapse of steel circular tubes for different ratios of diameter to thickness (D/t) under pure bending or combined bending and external pressure.In these formulas,the strain-displacement relationship is deduced from the nonlinear ring theory,and the Ramberg-Osgood constitutive model is applied to simulate the inelastic material behavior.Meanwhile,the principle of virtual work is adopted to derive the equilibrium equations.A set of equations is solved by the Newton-Raphson method,and the iterative scheme contains nested iteration for the constitutive relation.In order to check the effectiveness of this theoretical method,illustrative examples are presented in this paper.Besides,the numerical simulation is carried out by use of ANSYS.A comparison of the results shows that the theoretical method can provide reasonable prediction for engineering practice. 相似文献
14.
水下加筋圆柱壳结构声散射特性研究 总被引:1,自引:0,他引:1
采用有限元/边界元(FEM/BEM)方法对水下加筋圆柱壳结构的声散射特性进行分析。考虑入射声场激发弹性结构振动产生二次辐射声场,总声场为入射场与散射场之和。基于Mindlin理论建立结构受迫振动的有限元模型,考虑入射声场为简谐激励,采用模态叠加法求出结构振动表面速度。根据声学边界元相关理论,利用有限元方法计算得出的弹性结构表面动力相应,可求出弹性结构的散射声场。研究结果表明,在同一波数下,不加筋结构后向散射强于加筋结构;加筋结构的散射指向性图案分叉较为明显;同种结构在波数增加的时候后向散射强度逐渐增大,前向散射强度逐渐减弱。 相似文献
15.
16.
Presented in this paper is a three-dimensional plastic limit analysis method of bearing capacity of the deeply-embedded large-diameter cylindrical structure in the cross-anisotmpic soft ground. The most likely failure mechanism is assumed to be of a composite rupture surface which is composed of an individual wedge in the passive zone or two wedges in both active and passive zones near the mudline, depending on the separation or bonding state at the interface between the cylindrical structure and neighboring soils in the active wedge, and a truncated spherical slip surface at the base of the cylinder when the structure tends to overturn around a point located on the symmetry axis of the structure. The cylindrical structure and soil interaction system under consideration is also numerically analyzed by the finite element method by virtue of the general-purpose FEM software ABAQUS, in which the soil is assumed to obey tie Hill's criterion of yield. Both the failure mechanism assumed and the plastic limit analysis predictions are validated by numerical computations based on FEM. For the K0-consolidated ground of clays typically with anisotropic undrained strength property, it is indicated through a parametric study that limit analysis without consideration of anisotropy of soil overestimates the lateral ultimate bearing capacity of a deeply-embedded cylindrical structure in soft ground in a certain condition. 相似文献
17.
1 .IntroductionThe large-diameter cylindrical structure for coastal and offshore engineering has been widely usedin China .Thistype of structureis composed of a steel or reinforced concrete cylindrical thin-wall shellplaced partlyintothe ground by a speci… 相似文献
18.
19.
Wang Gang Li Zhen Chen Tieyun Ph. D. Marine Design Research Institute of China Shanghai Engineer Marine Design Research Institute of China Shanghai Professor Dept. of Naval Architecture Ocean Engineering Shanghai Jiao Tong University Shanghai 《中国海洋工程》1998,(1)
This paper concerns the dynamic plastic response of a circular plate resting on fluid subjectedto a uniformly distributed rectangular load pulse with finite deformation.It is assumed that the fluid isincompressible and inviscous,and the plate is made of rigid-plastic material and simply supported along itsedge.By using the method of the Hankel integral transformation,the nonuniform fluid resistance is de-rived as the plate and the fluid is coupled.Finally,an analytic solution for a circular plate under a mediumload is obtained according to the equations of motion of the plate with finite deformation. 相似文献
20.
M. Zhou 《Estuarine, Coastal and Shelf Science》1998,46(6):811-825
Baroclinic circulation in highly stratified and partially stratified estuaries is characterised by a two-layer flow: a bottom salt- water inflow and a surface brackish-water outflow. Tidal period variation of the thicknesses of a two-layer flow is observed to be associated with mixing, bottom stress and hydraulic characteristics of superposed tidal and gravity currents. Here, both analytical two-layer hydraulic equations with weak friction and a numerical model including a turbulence closure were utilised to understand the mechanism of the layer tendency within a two-layer flow under different barotropic flow conditions. It has been found that in the weak bottom friction case, a gravity current has two critical solutions at the layer thickness equal to 0·5Hand 0·292H. The layer thickness towards a particular critical solution is dependent on the sign of the bottom stress, i.e. when the bottom stress is opposite (favor) to the bottom gravity current, its layer thickness converges to 0·5H(0·292H). In the case of strong bottom stress and mixing opposing the gravity current, the solutions of the gravity current layer thickness at 0·5Hand 0·292Hwill not be valid. Both mixing and vorticity produced by bottom stress erode the halocline, and produce a high velocity core in the mid-depth, which leads to the thickness of a bottom gravity current greater than 0·5H. These internal hydraulic tendency and mixing processes, varying with time-dependent barotropic tidal current forcing, determine the tidal period variation of the gravity current structure. 相似文献