Airports and Environment: Proposal of Wastewater Reclamation at São Paulo International Airport

One way to reduce water consumption in urban areas is by using alternative sources of supply that can be provided by collecting rainwater and reusing wastewater for less restricted purposes. Thus, this study evaluated the characteristics of effluents produced by the wastewater treatment plant (WWTP) of São Paulo International Airport (SPIA), Brazil, in order to reuse it in non‐potable situations. The results achieved, indicated high efficiency in the biological system utilized by SPIA. The removal rates is equal to or >90% for most of the parameters analyzed, among them, fluoride, salinity, nitrite, nitrate, ammonium nitrogen, total nitrogen, phosphorus, sedimentable solids, turbidity, conductivity, apparent color, chemical oxygen demand, biochemical oxygen demand, total organic carbon, fecal coliforms, and oils and greases. Despite the final effluents were good enough to be launched in the local streams, they shall be submitted to a complementary treatment in order to fit some quality parameters to be reused for specific demands (landscape irrigation, toilet flushing, vehicle washing, fire fighting, and dust control).     

Anodic Oxidation as Green Alternative for Removing Diethyl Phthalate from Wastewater Using Pb/PbO2 and Ti/SnO2 Anodes

The electrochemical oxidation (EO) of diethyl phthalate (DEP) in aqueous solution was studied at Pb/PbO₂ and Ti/SnO₂ anode materials under galvanostatic‐experimental conditions. Results obtained clearly demonstrated that the anode plays a significant role for the optimization of the oxidation process, deciding the mechanisms and by‐products formed. DEP and by‐products of oxidation were also analyzed during various stages of the electrolysis reaction by HPLC and GC/MS techniques. Before the analysis by GC/MS technique, the samples were treated by solid phase microextraction (SPME) in order to concentrate the compounds from the reaction solution and identify all electrolysis intermediates. Current efficiencies (instantaneous current efficiency; ICE and total current efficiency; TCE) achieved during EO experiments were dependent on anode used and current density (20–40 mA cm^?2) at 40°C. The results obtained demonstrated that the environmental electrochemical methods can be a feasible alternative for the wastewater treatment containing hazardous phthalates.     

Determination of Selected Endocrine Disrupter Compounds at Trace Levels in Sewage Sludge Samples

Simultaneous determination of endocrine disrupter compounds (EDCs), namely diltiazem, progesterone, benzylbutylphthalate (BBP), estrone, and carbamazepine (Cbz) were performed by using high performance LC–electrospray tandem MS. The ultrasound‐aided sequential extraction of sludge samples was optimized to increase extraction efficiencies of the analytes; ranging between 93.0–98.3% recovery. The limit of detection values for diltiazem, progesterone, BBP, estrone, and Cbz were found as 0.78, 0.72, 0.24, 0.75, and 0.72 µg/kg, respectively. Sludge samples taken from Ankara Tatlar; Hurma, Lara and Kemer of Antalya, and Middle East Technical University‐vacuum rotating membrane wastewater treatment plant (WWTP) aeration tanks were analyzed for their EDCs contents under optimized conditions. Diltiazem was found in all the samples in the range between 116.4–180.8 ng/g while progesterone and estrone were not detected in any of the samples analyzed with the exception of Tatlar WWTP. The BBP concentration was between beyond detection and 9195.5 ng/g. In addition, Cbz was found in all the samples ranging from 25.6 to 118.8 ng/g.     

Typology of Municipal Wastewater Treatment Technologies in Latin America

This paper presents an analysis of the wastewater treatment plants in six Latin American and Caribbean countries. Based on a sample of 2734 municipal treatment facilities, the applied processes are classified by sizes (influent flow) and type of technologies. The distribution of the technologies is also presented for each of the six countries. In addition, a representative municipal wastewater characterization, based on influent data from 174 treatment plants, is proposed. Results show that stabilization ponds, activated sludge, and the upflow anaerobic sludge blanket reactors represent 80% of the treatment facilities of the sample, providing treatment to 81% of the total flow considered. Moreover, 67% of the plants in the sample are small (flow <25 L/s) and the very small facilities (influent flow <5 L/s) are extensively applied in the region (34% of the sample), especially in Mexico and Brazil. The use of very small treatment plants may result in low energy efficiency systems and on possible incompliance of the discharge standards. This common practice in several countries in Latin America should be revised in order to improve the environmental performance of such facilities.     

Partitioning of Fluoroquinolones on Wastewater Sludge

Laboratory‐scale batch experiments were conducted to investigate the adsorption behavior of eight fluoroquinolones (FQs) on aerobic, anoxic, and anaerobic sludge, under different adsorpiton time, pH, and temperature conditions. Results indicated that adsorption of FQs onto all sludge was a physical sorption process. The relationship of the partitioning coefficient (K_d) and the octanol/water partition coefficient (K_ow) for each FQ was established. The adsorbed fraction of FQs on sludge could then be predicted with the K_d. It was calculated that about 50–72% of the FQs were adsorbed on the sludge. Therefore, the adsorption effect must be considered when studying the fate and occurrence of FQs in wastewater treatment systems.     

Degradation of Acid Pharmaceuticals in the UV/H2O2 Process: Effects of Humic Acid and Inorganic Salts

The presence of acid pharmaceuticals in water environments poses a potential threat to ecosystems and human health. Recent research has shown that photo oxidation processes are much more effective for removing these pharmaceuticals. However, the existence of humic acid (HA) could inhibit the clearance efficiency of this process. In this study, we investigated the photochemical degradation of six selected acid pharmaceuticals in surface water and effluent from wastewater treatment plants using the UV/H₂O₂ process. The results showed that HA can act as a photo sensitizer or a ^. OH sink, and its concentration had a significant inhibitory effect on the degradation of acid pharmaceuticals. Most of these pharmaceuticals were inhibited during this process when HA was added to deionized water solutions. In addition, the effects of chloride, bicarbonate, and nitrate on the degradation of these pharmaceuticals were different. The removal efficiency of these acid pharmaceuticals is lower in natural samples than in deionized samples because of the complex constituents in the latter.     

Reuse of Distillery Wastewater with Designed Dose and Pattern for Sugarcane Irrigation

The present investigation aims to optimize dose and pattern of distillery effluent for sugarcane irrigation. The postmethanated distillery effluent (PMDE) was recorded to have significant amount of micro‐ (Na, Zn, Fe) and macro‐ (Ca, Mg, N‐NO₃, P, K, S–SO) nutrients and so was utilized for sugarcane irrigation. Lysimetric studies were conducted to assess the impact of PMDE on sugarcane productivity with different concentrations (50 and 75%) and irrigation patterns (intermittent and pre‐sowing). The intermittent pattern of ferti‐irrigation with 50 and 75% effluent dose for sugarcane crop was found to enhance the growth and quality parameters of crop without impairing the groundwater quality. Results were more pronounced with 75% intermittent irrigation as the percent increase with respect to control for plant length, cane girth, cane weight, number of internodes per cane, dry matter accumulation, juice extraction, sucrose content, and available sugar were 28.0, 42.5, 14.6, 40.2, 54.4, 18.9, 44.9, 57.9, and 50.0%, respectively. It is suggested that PMDE can be used as an alternative of fresh water irrigation and also as a fertilizer for sugarcane, provided that the effluent quality and sugarcane quality is continuously monitored to avoid any contamination.     

Investigation on the Levels of Heavy Metals,Polycyclic Aromatic Hydrocarbons,and Polychlorinated Biphenyls in Sewage Sludge Samples and Ecotoxicological Testing

This article reports the levels of heavy metals, polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) in sewage sludges taken from two wastewater treatment plants (WWTPs) in Konya (Turkey) as well as their toxicity. The concentrations of heavy metals, including Cd, Cr, Cu, Ni, Pb, Zn in sludge samples from plant #2 did not exceed the limits described in both Turkish and European Union (EU) regulations. The similar result was observed in samples obtained from plant #1, except for sludge taken in May 2010. The ΣPAHs concentration ranging from 960 to 7680 µg/kg dry matter shows that sewage sludges from plant #1 could be used for agricultural purpose. However, sewage sludges from plant #2 (ΣPAHs: 1077–17 509 µg/kg dry matter) was not suitable for using in agriculture. The concentrations of ΣPCBs in all investigated sludges from plant #1 (7.46–709.36 µg/kg dry matter) and plant #2 (14.12–788.47 µg/kg dry matter) were lower than the limits reported in Turkish and EU regulations. The probable sources of PAHs and PCBs in sludges were also determined. The ecotoxicological tests examined on Vibrio fischeri and Lepidium sativum organisms showed that sludges from plant #1 had no significant toxic effect, while sludges from plant #2 had acute toxic property. Finally, all the results showed that sewage sludges from plant #1 had potential for being used in agriculture.     

Removal of Basic Textile Dyes in Single and Multi‐Dye Solutions by Adsorption: Statistical Optimization and Equilibrium Isotherm Studies

The removal of three basic dyes by adsorption onto bentonite was investigated for single, binary, and ternary solutions in a batch system. Before and after dye adsorption, bentonite samples were analyzed by using X‐ray fluorescence spectrometer, SEM, and Fourier transform IR spectrometry. The D‐optimal design and response surface methodology were applied in designing the experiments for evaluating the interactive effects of each initial concentrations variable of the dyes in binary systems. Predicted values were found to be in good agreement with experimental values, which defined propriety of the model and the achievement of D‐optimal in optimization of adsorption of binary dye systems. The competitive adsorption results showed that the adsorption amount of a dye was suppressed in the presence and increasing concentrations of second or third dye. For mono‐component isotherm modeling, Langmuir and Freundlich models were applied to equilibrium data of single, binary, and ternary dye solutions, while modified Langmuir, Sheindrof–Rebhun–Sheintuch and modified extended Freundlich models were also applied to equilibrium data of binary dye solutions for multi‐component isotherm modeling. The results showed that the Langmuir was the more suitable model for single dye systems while extended Freundlich model fitted best to the experimental data with the lowest error values for multi‐dye systems.