Oxide‐bearing and FeO‐rich clasts in aubrites

Abstract— We report the occurrence of an oxide‐bearing clast and an FeO‐rich clast from aubrites. The FeO‐rich clast in Pesyanoe is dominated by olivine and pyroxene phenocrysts with mineral compositions slightly less FeO‐rich than is typical for H chondrites. In Allan Hills (ALH) 84008, the oxide‐bearing clast consists of a single forsterite grain rimmed by an array of sulfides, oxides, and phosphides. We consider a number of possible origins. We can exclude formation by melting of oxide‐bearing chondrules and CAIs formed in enstatite chondrites. The Pesyanoe clast may have formed in a more oxidized region of the aubrite parent body or, more likely, is a foreign clast from a more oxidized parent body. The ALH 84008 clast likely formed by reaction between sulfides and silicates as a result of cooling, oxidation, or de‐sulfidization. This clast appears to be the first oxide‐bearing clast from an aubritic breccia that formed on the aubrite parent body. Identification of additional oxide‐bearing clasts in aubrites could shed light on whether this was a widespread phenomenon and the origin of these enigmatic objects.     

Argon‐40‐argon‐39 chronology and petrogenesis along the eastern limb of the Moon from Luna 16, 20 and 24 samples

Abstract— Eighteen new lithic fragments from the Soviet Luna missions have been analyzed with electron microprobe and ⁴⁰Ar‐³⁹Ar methods. Luna 16 basalt fragments have aluminous compositions consistent with previous analyses, but have two distinct sets of well‐constrained ages (3347 ± 24 Ma, 3421 ± 30 Ma). These data, combined with other Luna 16 basalt ages, imply that there were multiple volcanic events filling Mare Fecunditatis. The returned basalt fragments have relatively old cosmicray exposure (CRE) ages and may have been recovered from the ejecta blanket of a young (1 Ga), nearby crater. A suite of highlands rocks (troctolites and gabbros) is represented in the new Luna 20 fragments. One fragment is the most compositionally primitive (Mg# = 91–92) spinel troctolite yet found. Both troctolites have apparent crystallization ages of 4.19 Ga; other rocks in the suite have progressively younger ages and lower Mg#s. The age and composition progression suggests that these rocks may have crystallized from a single source magma, or from similar sources mobilized at the same time. Within the new Luna 24 basalt fragments is a quench‐textured olivine vitrophyre with the most primitive composition yet analyzed for a Luna 24 basalt, and several much more evolved olivine‐bearing basalts. Both new and previously studied Luna 24 very low‐Ti (VLT) basalt fragments have a unimodal age distribution (3273 ± 83 Ma), indicating that most returned samples come from a single extrusive episode within Mare Crisium much later than the Apollo 17 VLT basalts (3.6–3.7 Ga).     

The L3–6 chondritic regolith breccia Northwest Africa (NWA) 869: (I) Petrology,chemistry, oxygen isotopes,and Ar‐Ar age determinations

Abstract– Northwest Africa (NWA) 869 consists of thousands of individual stones with an estimated total weight of about 7 metric tons. It is an L3–6 chondrite and probably represents the largest sample of the rare regolith breccias from the L–chondrite asteroid. It contains unequilibrated and equilibrated chondrite clasts, some of which display shock‐darkening. Impact melt rocks (IMRs), both clast‐free and clast‐poor, are strongly depleted in Fe,Ni metal, and sulfides. An unequilibrated microbreccia, two different light inclusions and two different SiO₂‐bearing objects were found. Although the matrix of this breccia appears partly clastic, it is not a simple mixture of fine‐grained debris formed from the above lithologies, but mainly represents an additional specific lithology of low petrologic type. We speculate that this material stems from a region of the parent body that was only weakly consolidated. One IMR clast and one SiO₂‐bearing object show Δ¹⁷O values similar to bulk NWA 869, suggesting that both are related to the host rock. In contrast, one light inclusion and one IMR clast appear to be unrelated to NWA 869, suggesting that the IMR clast is contaminated with impactor material. ⁴⁰Ar‐³⁹Ar analyses of a type 4 chondrite clast yield a plateau age of 4402 ± 7 Ma, which is interpreted to be the result of impact heating. Other impact events are recorded by an IMR clast at 1790 ± 36 Ma and a shock‐darkened clast at 2216 ± 40 Ma, demonstrating that NWA 869 escaped major reset in the course of the event at approximately 470 Ma that affected many L–chondrites.     

Kinetics of organic matter degradation in the Murchison meteorite for the evaluation of parent‐body temperature history

Abstract– To evaluate kinetic parameters for thermal degradation of organic matter, in situ heating experiments of insoluble organic matter (IOM) and bulk of Murchison (CM2) meteorite were conducted under Fourier transform infrared micro‐spectroscopy combined with a heating stage. Decreases of aliphatic C–H band area under Ar flow were well fitted with Ginstling‐Brounshtein three‐dimensional diffusion model, and the rate constants for decreases of aliphatic C–H were determined. Activation energies E_a and frequency factors A obtained from these rate constants at different temperatures using the Arrhenius equation were E_a = 109 ± 3 kJ mol^?1 and A = 8.7 × 10⁴ s^?1 for IOM, and E_a = 61 ± 6 kJ mol^?1 and A = 3.8 s^?1 for bulk, respectively. Activation energy values of aliphatic C–H decrease are larger for IOM than bulk. Hence, the mineral assemblage of the Murchison meteorite might have catalytic effects for the organic matter degradation. Using obtained kinetic expressions, the time scale for metamorphism can be estimated for a given temperature with aliphatic C–H band area, or the temperature of metamorphism can be estimated for a given time scale. For example, using the obtained kinetic parameters of IOM, aliphatic C–H is lost approximately within 200 years at 100 °C and 100 Myr at 0 °C. Assuming alteration period of 7.5 Myr, alteration temperatures could be calculated to be <15 ± 12 °C. Aliphatic C–H decrease profiles in a parent body can be estimated using time–temperature history model. The kinetic expression obtained by the infrared spectral band of aliphatic C–H could be used as an alternative method to evaluate thermal processes of organic matter in carbonaceous chondrites.     

The Gao‐Guenie impact melt breccia—Sampling a rapidly cooled impact melt dike on an H chondrite asteroid?

The Gao‐Guenie H5 chondrite that fell on Burkina Faso (March 1960) has portions that were impact‐melted on an H chondrite asteroid at ~300 Ma and, through later impact events in space, sent into an Earth‐crossing orbit. This article presents a petrographic and electron microprobe analysis of a representative sample of the Gao‐Guenie impact melt breccia consisting of a chondritic clast domain, quenched melt in contact with chondritic clasts, and an igneous‐textured impact melt domain. Olivine is predominantly Fo_80–82. The clast domain contains low‐Ca pyroxene. Impact melt‐grown pyroxene is commonly zoned from low‐Ca pyroxene in cores to pigeonite and augite in rims. Metal–troilite orbs in the impact melt domain measure up to ~2 mm across. The cores of metal orbs in the impact melt domain contain ~7.9 wt% of Ni and are typically surrounded by taenite and Ni‐rich troilite. The metallography of metal–troilite droplets suggest a stage I cooling rate of order 10 °C s^?1 for the superheated impact melt. The subsolidus stage II cooling rate for the impact melt breccia could not be determined directly, but was presumably fast. An analogy between the Ni rim gradients in metal of the Gao‐Guenie impact melt breccia and the impact‐melted H6 chondrite Orvinio suggests similar cooling rates, probably on the order of ~5000–40,000 °C yr^?1. A simple model of conductive heat transfer shows that the Gao‐Guenie impact melt breccia may have formed in a melt injection dike ~0.5–5 m in width, generated during a sizeable impact event on the H chondrite parent asteroid.     

Origin of the metamorphosed clasts in the CV3 carbonaceous chondrite breccias of Graves Nunataks 06101, Vigarano,Roberts Massif 04143, and Yamato‐86009

We observed metamorphosed clasts in the CV3 chondrite breccias Graves Nunataks 06101, Vigarano, Roberts Massif 04143, and Yamato‐86009. These clasts are coarse‐grained polymineralic rocks composed of Ca‐bearing ferroan olivine (Fa_24–40, up to 0.6 wt% CaO), diopside (Fs_7–12Wo_44–50), plagioclase (An_52–75), Cr‐spinel (Cr/[Cr + Al] = 0.4, Fe/[Fe + Mg] = 0.7), sulfide and rare grains of Fe‐Ni metal, phosphate, and Ca‐poor pyroxene (Fs₂₄Wo₄). Most clasts have triple junctions between silicate grains. The rare earth element (REE) abundances are high in diopside (REE ~3.80–13.83 × CI) and plagioclase (Eu ~12.31–14.67 × CI) but are low in olivine (REE ~0.01–1.44 × CI) and spinel (REE ~0.25–0.49 × CI). These REE abundances are different from those of metamorphosed chondrites, primitive achondrites, and achondrites, suggesting that the clasts are not fragments of these meteorites. Similar mineralogical characteristics of the clasts with those in the Mokoia and Yamato‐86009 breccias (Jogo et al. 2012 ) suggest that the clasts observed in this study would also form inside the CV3 chondrite parent body. Thermal modeling suggests that in order to reach the metamorphosed temperatures of the clasts of >800 °C, the clast parent body should have accreted by ~2.5–2.6 Ma after CAIs formation. The consistency of the accretion age of the clast parent body and the CV3 chondrule formation age suggests that the clasts and CV3 chondrites could be originated from the same parent body with a peak temperature of 800–1100 °C. If the body has a peak temperature of >1100 °C, the accretion age of the body becomes older than the CV3 chondrule formation age and multiple CV3 parent bodies are likely.     

The Ar‐Ar age and petrology of Miller Range 05029: Evidence for a large impact in the very early solar system

Abstract– Miller Range (MIL) 05029 is a slowly cooled melt rock with metal/sulfide depletion and an Ar‐Ar age of 4517 ± 11 Ma. Oxygen isotopes and mineral composition indicate that it is an L chondrite impact melt, and a well‐equilibrated igneous rock texture with a lack of clasts favors a melt pool over a melt dike as its probable depositional setting. A metallographic cooling rate of approximately 14 °C Ma^?1 indicates that the impact occurred at least approximately 20 Ma before the Ar‐Ar closure age of 4517 Ma, possibly even shortly after accretion of its parent body. A metal grain with a Widmanstätten‐like pattern further substantiates slow cooling. The formation age of MIL 05029 is at least as old as the Ar‐Ar age of unshocked L and H chondrites, indicating that endogenous metamorphism on the parent asteroid was still ongoing at the time of impact. Its metallographic cooling rate of approximately 14 °C Ma^?1 is similar to that typical for L6 chondrites, suggesting a collisional event on the L chondrite asteroid that produced impact melt at a minimum depth of 5–12 km. The inferred minimum crater diameter of 25–60 km may have shattered the 100–200 km diameter L chondrite asteroid. Therefore, MIL 05029 could record the timing and petrogenetic setting for the observed lack of correlation of cooling rates with metamorphic grades in many L chondrites.     

53Mn‐53Cr ages of Kaidun carbonates

Abstract– We report the ⁵³Mn‐⁵³Cr systematics of three dolomite grains from two different CI1 clasts contained within the Kaidun meteorite breccia. Three internal isochrones result in initial ⁵³Mn/⁵⁵Mn ratios of (4.2 ± 0.4) × 10^?6, (4.6 ± 1.3) × 10^?6, and (5.2 ± 1.1) × 10^?6. These initial values are consistent with those measured for dolomite in the Orgueil CI1 chondrite ( Hoppe et al. 2007 ; Petitat et al. 2009 ) but significantly lower than the initial ratio determined by Hutcheon et al. (1999) from a combination of different carbonate types within various lithologies of the Kaidun meteorite. We construct an accretion scenario for the Kaidun breccia by comparing the mineralogy and formation time scales of carbonates in the Kaidun CI1 lithologies to the analogous ones of the CI1 chondrite Orgueil. In Orgueil, dolomite precipitation precedes the formation of the first bruennerite grains by a few million years ( Hoppe et al. 2007 ; Petitat et al. 2009 ). As the CI1 clasts in Kaidun lack breunnerite grains, and considering that aqueous alteration occurred prior to reaccretion of the various clasts onto the Kaidun parent body (e.g., MacPherson et al. 2009 ), we hypothesize that after rapid accretion and early aqueous alteration occurring within the first approximately 4 Myr after solar system formation, impact disruption of several asteroids and their reassembly into the Kaidun parent asteroid was complete within an additional approximately 2 Myr. This confirms that aqueous alteration, impact, and reaccretion of material in the asteroid belt were early processes that began contemporaneously with chondrule formation.     

What’s up? Preservation of gravitational direction in the Larkman Nunatak 06299 LL impact melt breccia

Abstract– Larkman Nunatak (LAR) 06299 is a vesicular LL chondrite impact melt breccia that cooled rapidly (0.1–0.3 °C s^?1) during crystallization. Ar‐Ar data from the literature indicate that the impact event that formed this rock occurred approximately 1 Ga ago. About 30 vol% of the meteorite consists of a melt matrix containing faceted and intergrown mafic silicate grains (mainly 4–11 μm size olivine phenocrysts) partially to completely surrounded by 2–20 μm size patches of plagioclase. Suspended in the melt are 30–370 μm size ellipsoidal to spheroidal metal‐sulfide nodules (several hundred per thin section), many connected to 8–600 μm size ellipsoidal to spheroidal vesicles. Most of the metal‐sulfide nodules contain a large oblate metallic Fe‐Ni bleb at one end of the nodule. For approximately 90% of the nodules, the metal blebs are aligned on the same side of the nodules; for approximately 80% of the nodules that are adjacent to vesicles, the vesicles are attached to the opposite end of the nodules from the oblate metal blebs. Most of the oblate metal blebs themselves are flattened in a direction perpendicular to the long axis of the nodule/vesicle. These features result from alignment in the gravitational field on the LL parent asteroid, making LAR 06299 the first known chondrite to indicate gravitational direction. Using reasonable estimates of the cooling rate, viscosity of the metal‐sulfide melt, and asteroid density, as well as the observed sizes of constituent phases in LAR 06299, we obtain a lower limit of approximately 1.5 km for the radius of the LAR 06299 parent body. The body was probably substantially larger.     

A large shock vein in L chondrite Roosevelt County 106: Evidence for a long‐duration shock pulse on the L chondrite parent body

A large shock‐induced melt vein in L6 ordinary chondrite Roosevelt County 106 contains abundant high‐pressure minerals, including olivine, enstatite, and plagioclase fragments that have been transformed to polycrystalline ringwoodite, majorite, lingunite, and jadeite. The host chondrite at the melt‐vein margins contains olivines that are partially transformed to ringwoodite. The quenched silicate melt in the shock veins consists of majoritic garnets, up to 25 μm in size, magnetite, maghemite, and phyllosilicates. The magnetite, maghemite, and phyllosilicates are the terrestrial alteration products of magnesiowüstite and quenched glass. This assemblage indicates crystallization of the silicate melt at approximately 20–25 GPa and 2000 °C. Coarse majorite garnets in the centers of shock veins grade into increasingly finer grained dendritic garnets toward the vein margins, indicating increasing quench rates toward the margins as a result of thermal conduction to the surrounding chondrite host. Nanocrystalline boundary zones, that contain wadsleyite, ringwoodite, majorite, and magnesiowüstite, occur along shock‐vein margins. These zones represent rapid quench of a boundary melt that contains less metal‐sulfide than the bulk shock vein. One‐dimensional finite element heat‐flow calculations were performed to estimate a quench time of 750–1900 ms for a 1.6‐mm thick shock vein. Because the vein crystallized as a single high‐pressure assemblage, the shock pulse duration was at least as long as the quench time and therefore the sample remained at 20–25 GPa for at least 750 ms. This relatively long shock pulse, combined with a modest shock pressure, implies that this sample came from deep in the L chondrite parent body during a collision with a large impacting body, such as the impact event that disrupted the L chondrite parent body 470 Myr ago.     

Igneous History of the Aubrite Parent Asteroid: Evidence from the Norton County Enstatite Achondrite

Abstract— We studied numerous specimens of the Norton County enstatite achondrite (aubrite) by optical microscopy, electron microprobe, and neutron-activation analysis. Our main conclusions are the following: 1. Norton County is a fragmental impact breccia, consisting of a clastic matrix made mostly of crushed enstatite, into which are embedded a variety of mineral and lithic clasts of both igneous and impact melt origin. 2. The Norton County precursor materials were igneous rocks, mostly plutonic orthopyroxenites, not grains formed by condensation from the solar nebula. 3. The Mg-silicate-rich aubrite parent body experienced extensive melting and igneous differentiation, causing formation of diverse lithologies, some of which have not been described previously. These lithologies include dunites (represented by forsterite crystals), plutonic orthopyroxenites (represented by most enstatite crystals in the matrix), plutonic pyroxenites (the pyroxenitic clasts), and plagioclase-silica rocks (like the feldspathic clasts). Presence of impact melt breccias (the microporphyritic clasts and the diopside-plagioclase-silica clast) of still different compositions further attest to the lithologic diversity of the aubrite parent body.     

Textural and compositional evidence for in situ crystallization of palisade bodies in coarse‐grained Ca‐Al‐rich inclusions

Palisade bodies, mineral assemblages with spinel shells, in coarse‐grained Ca‐, Al‐rich inclusions (CAIs) have been considered either as exotic “mini‐CAIs” captured by their host inclusions (Wark and Lovering 1982 ) or as in situ crystallization products of a bubble‐rich melt (Simon and Grossman 1997 ). In order to clarify their origins, we conducted a comprehensive study of palisade bodies in an Allende Type B CAI (BBA‐7), using electron backscatter diffraction (EBSD), micro‐computed tomography (Micro‐CT), electron probe microanalysis (EPMA), and secondary ion mass spectrometry (SIMS). New observations support the in situ crystallization mechanism: early/residual melt infiltrated into spinel‐shelled bubbles and crystallized inside. Evidence includes (1) continuous crystallography of anorthite from the interior of the palisade body to the surrounding host; (2) partial consolidation of two individual palisade bodies revealed by micro‐CT; (3) a palisade body was entirely enclosed in a large anorthite crystal, and the anorthite within the palisade body shows the same crystallographic orientation as the anorthite host; and (4) identical chemical and oxygen isotopic compositions of the constituent minerals between the palisade bodies and the surrounding host. Oxygen isotopic compositions of the major minerals in BBA‐7 are bimodal‐distributed. Spinel and fassaite are uniformly ¹⁶O‐rich with ?¹⁷O = ?23.3 ± 1.5‰ (2SD), and melilite and anorthite are homogeneously ¹⁶O‐poor with ?¹⁷O = ?3.2 ± 0.7‰ (2SD). The latter ?¹⁷O value overlaps with that of the Allende matrix (?¹⁷O ~ ?2.87‰) (Clayton and Mayeda 1999 ), which could be explained by secondary alteration with a ¹⁶O‐poor fluid in the parent body. The mobility of fluid could be facilitated by the high porosity (1.56–2.56 vol%) and connectivity (~0.17–0.55 vol%) of this inclusion.     

Cover

BSE image of a polished thick section EET 87720,41 containing an igneous‐textured granitic clast, prepared from an interior chip of a polymict ureilite EET 87720. The clast is not indigenous to the ureilite parent body, but it provides evidence for the formation of evolved melts on an unknown parent body (a volatile‐rich parent body perhaps resembling early Mars) in the early solar system. The scale bar size is 1 mm. Andrew Beard et al. describe the clast in detail in their paper on pp. 1613–1623. (Image courtesy of A. Beard).     

Ar‐Ar ages and thermal histories of enstatite meteorites

Abstract– Compared with ordinary chondrites, there is a relative paucity of chronological and other data to define the early thermal histories of enstatite parent bodies. In this study, we report ³⁹Ar‐⁴⁰Ar dating results for five EL chondrites: Khairpur, Pillistfer, Hvittis, Blithfield, and Forrest; five EH chondrites: Parsa, Saint Marks, Indarch, Bethune, and Reckling Peak 80259; three igneous‐textured enstatite meteorites that represent impact melts on enstatite chondrite parent bodies: Zaklodzie, Queen Alexandra Range 97348, and Queen Alexandra Range 97289; and three aubrites, Norton County, Bishopville, and Cumberland Falls Several Ar‐Ar age spectra show unusual ³⁹Ar recoil effects, possibly the result of some of the K residing in unusual sulfide minerals, such as djerfisherite and rodderite, and other age spectra show ⁴⁰Ar diffusion loss. Few additional Ar‐Ar ages for enstatite meteorites are available in the literature. When all available Ar‐Ar data on enstatite meteorites are considered, preferred ages of nine chondrites and one aubrite show a range of 4.50–4.54 Ga, whereas five other meteorites show only lower age limits over 4.35–4.46 Ga. Ar‐Ar ages of several enstatite chondrites are as old or older as the oldest Ar‐Ar ages of ordinary chondrites, which suggests that enstatite chondrites may have derived from somewhat smaller parent bodies, or were metamorphosed to lower temperatures compared to other chondrite types. Many enstatite meteorites are brecciated and/or shocked, and some of the younger Ar‐Ar ages may record these impact events. Although impact heating of ordinary chondrites within the last 1 Ga is relatively common for ordinary chondrites, only Bethune gives any significant evidence for such a young event.     

An anomalous eucrite,Dhofar 007, and a possible genetic relationship with mesosiderites

Abstract— We studied the texture, mineralogy, and bulk chemical composition of Dhofar 007, a basaltic achondrite. Dhofar 007 is a polymict breccia that is mostly composed of coarse‐grained granular (CG) clasts with a minor amount of xenolithic components, such as a fragment of Mg‐rich pyroxene. The coarse‐grained, relict gabbroic texture, mineral chemistry, and bulk chemical data of the coarse‐grained clast indicate that the CG clasts were originally a cumulate rock crystallized in a crust of the parent body. However, in contrast to monomict eucrites, the siderophile elements are highly enriched and could have been introduced by impact events. Dhofar 007 appears to have experienced a two‐stage postcrystallization thermal history: rapid cooling at high temperatures and slow cooling at lower temperatures. The presence of pigeonite with closely spaced, fine augite lamellae suggests that this rock was cooled rapidly from higher temperatures (>0.5 °C/yr at ˜1000 °C) than typical cumulate eucrites. However, the presence of the cloudy zone in taenite and the Ni profile across the kamacite‐taenite boundaries indicates that the cooling rate was very slow at lower temperatures (˜1–10 °C/Myr at <600–700 °C). The slow cooling rate is comparable to those in mesosiderites and pallasites. The two‐stage thermal history and the relative abundance of siderophile elements similar to those for metallic portions in mesosiderites suggest that Dhofar 007 is a large inclusion of mesosiderite. However, we cannot rule out a possibility that Dhofar 007 is an anomalous eucrite.     

Shock‐induced changes in density and porosity in shock‐metamorphosed crystalline rocks,Haughton impact structure,Canada

Abstract– Shock metamorphism can occur at transient pressures that reach tens of GPa and well over 1000 °C, altering the target material on both megascopic and microscopic scales. This study explores the effects of shock metamorphism on crystalline, quartzofeldspathic basement material from the Haughton impact structure on Devon Island, Arctic Canada. Shock levels were assigned to samples based on petrographic examination of main mineral phases. Conventional shock classification schemes proved to incompletely describe the Haughton samples so a modified shock classification system is presented. Fifty‐two crystalline bedrock samples from the clast‐rich impact melt rocks in the crater, and one reference site outside of the crater, were classified using this system. The shock levels range from 0 to 7 (according to the new shock stage classification proposed here, i.e., stages 0–IV after the Stöffler classification), indicating shock pressures ranging from 0 to approximately 80 GPa. The second aspect of this study involved measuring bulk physical characteristics of the shocked samples. The bulk density, grain density, and porosity were determined using a water displacement method, a bead displacement method, and a Hepycnometer. Results suggest a nonlinear, negative correlation between density and shock level such that densities of crystalline rocks with original densities of approximately 3 g cm^?3 are reduced to <1.0 g cm^?3 at high shock levels. The results also show a positive nonlinear correlation between porosity and shock level. These data illustrate the effect of shock on the bulk physical characteristics of crystalline rocks, and has implications for assessing the habitability of shocked rocks.     

Frontier Mountain 93001: A coarse‐grained,enstatite‐augite‐oligoclase‐rich,igneous rock from the acapulcoite‐lodranite parent asteroid

Abstract— The Frontier Mountain (FRO) 93001 meteorite is a 4.86 g fragment of an unshocked, medium‐ to coarse‐grained rock from the acapulcoite‐lodranite (AL) parent body. It consists of anhedral orthoenstatite (Fs_{13.3 ± 0.4}Wo_{3.1 ± 0.2}), augite (Fs_{6.1 ± 0.7}Wo_{42.3 ± 0.9}; Cr₂O₃ = 1.54 ± 0.03), and oligoclase (Ab_{80.5 ± 3.3}Or_{3.1 ± 0.6}) up to >1 cm in size enclosing polycrystalline aggregates of fine‐grained olivine (average grain size: 460 ± 210 μm) showing granoblastic textures, often associated with Fe,Ni metal, troilite, chromite (cr# = 0.91 ± 0.03; fe# = 0.62 ± 0.04), schreibersite, and phosphates. Such aggregates appear to have been corroded by a melt. They are interpreted as lodranitic xenoliths. After the igneous (the term “igneous” is used here strictly to describe rocks or minerals that solidified from molten material) lithology intruding an acapulcoite host in Lewis Cliff (LEW) 86220, FRO 93001 is the second‐known silicate‐rich melt from the AL parent asteroid. Despite some similarities, the silicate igneous component of FRO 93001 (i.e., the pyroxene‐plagioclase mineral assemblage) differs in being coarser‐grained and containing abundant enstatite. Melting‐crystallization modeling suggests that FRO 93001 formed through high‐degree partial melting (≥35 wt%; namely, ≥15 wt% silicate melting and ?20 wt% metal melting) of an acapulcoitic source rock, or its chondritic precursor, at temperatures ≥1200 °C, under reducing conditions. The resulting magnesium‐rich silicate melt then underwent equilibrium crystallization; prior to complete crystallization at ?1040 °C, it incorporated lodranitic xenoliths. FRO 93001 is the highest‐temperature melt from the AL parent‐body so far available in laboratory. The fact that FRO 93001 could form by partial melting and crystallization under equilibrium conditions, coupled with the lack of quench‐textures and evidence for shock deformation in the xenoliths, suggests that FRO 93001 is a magmatic rock produced by endogenic heating rather than impact melting.     

Mineralogy,petrology, and shock history of lunar meteorite Sayh al Uhaymir 300: A crystalline impact‐melt breccia

Abstract— Sayh al Uhaymir (SaU) 300 comprises a microcrystalline igneous matrix (grain size <10 μm), dominated by plagioclase, pyroxene, and olivine. Pyroxene geothermometry indicates that the matrix crystallized at ?1100 °C. The matrix encloses mineral and lithic clasts that record the effects of variable levels of shock. Mineral clasts include plagioclase, low‐ and high‐Ca pyroxene, pigeonite, and olivine. Minor amounts of ilmenite, FeNi metal, chromite, and a silica phase are also present. A variety of lithic clast types are observed, including glassy impact melts, impact‐melt breccias, and metamorphosed impact melts. One clast of granulitic breccia was also noted. A lunar origin for SaU 300 is supported by the composition of the plagioclase (average An₉₅), the high Cr content in olivine, the lack of hydrous phases, and the Fe/Mn ratio of mafic minerals. Both matrix and clasts have been locally overprinted by shock veins and melt pockets. SaU 300 has previously been described as an anorthositic regolith breccia with basaltic components and a granulitic matrix, but we here interpret it to be a polymict crystalline impact‐melt breccia with an olivine‐rich anorthositic norite bulk composition. The varying shock states of the mineral and lithic clasts suggest that they were shocked to between 5–28 GPa (shock stages S1–S2) by impact events in target rocks prior to their inclusion in the matrix. Formation of the igneous matrix requires a minimum shock pressure of 60 GPa (shock stage >S4). The association of maskelynite with melt pockets and shock veins indicates a subsequent, local 28–45 GPa (shock stage S2–S3) excursion, which was probably responsible for lofting the sample from the lunar surface. Subsequent fracturing is attributed to atmospheric entry and probable breakup of the parent meteor.     

Metamorphosed calcium‐aluminum‐rich inclusions in CK carbonaceous chondrites

CK chondrites are the only group of carbonaceous chondrites with petrologic types ranging from 3 to 6. Although CKs are described as calcium‐aluminum‐rich inclusion (CAI)‐poor objects, the abundance of CAIs in the 18 CK3–6 we analyzed ranges from zero to approximately 16.4%. During thermal metamorphism, some of the fine‐grained CAIs recrystallized as irregular assemblages of plagioclase + Ca‐rich pyroxene ± olivine ± Ca‐poor pyroxene ± magnetite. Coarse‐grained CAIs display zoned spinel, fassaite destabilization, and secondary grossular and spinel. Secondary anorthite, grossular, Ca‐rich pyroxene, and spinel derive from the destabilization of melilite, which is lacking in all CAIs investigated. The Al‐Mg isotopic systematics measured in fine‐ and coarse‐grained CAIs from Tanezrouft (Tnz) 057 was affected by Mg redistribution. The partial equilibration of Al‐Mg isotopic signatures obtained in the core of a coarse‐grained CAI (CG1‐CAI) in Tnz 057 may indicate a lower peak temperature for Mg diffusion of approximately 540–580 °C, while grossular present in the core of this CAI indicates a higher temperature of around 800 °C for the metamorphic event on the parent body of Tnz 057. Excluding metamorphic features, the similarity in nature and abundance of CAIs in CK and CV chondrites confirms that CVs and CKs form a continuous metamorphic series from type 3 to 6.