The formation and alteration of the Renazzo‐like carbonaceous chondrites III: Toward understanding the genesis of ferromagnesian chondrules

To better understand the formation conditions of ferromagnesian chondrules from the Renazzo‐like carbonaceous (CR) chondrites, a systematic study of 210 chondrules from 15 CR chondrites was conducted. The texture and composition of silicate and opaque minerals from each observed FeO‐rich (type II) chondrule, and a representative number of FeO‐poor (type I) chondrules, were studied to build a substantial and self‐consistent data set. The average abundances and standard deviations of Cr₂O₃ in FeO‐rich olivine phenocrysts are consistent with previous work that the CR chondrites are among the least thermally altered samples from the early solar system. Type II chondrules from the CR chondrites formed under highly variable conditions (e.g., precursor composition, redox conditions, cooling rate), with each chondrule recording a distinct igneous history. The opaque minerals within type II chondrules are consistent with formation during chondrule melting and cooling, starting as S‐ and Ni‐rich liquids at 988–1350 °C, then cooling to form monosulfide solid solution (mss) that crystallized around olivine/pyroxene phenocrysts. During cooling, Fe,Ni‐metal crystallized from the S‐ and Ni‐rich liquid, and upon further cooling mss decomposed into pentlandite and pyrrhotite, with pentlandite exsolving from mss at 400–600 °C. The composition, texture, and inferred formation temperature of pentlandite within chondrules studied here is inconsistent with formation via aqueous alteration. However, some opaque minerals (Fe,Ni‐metal versus magnetite and panethite) present in type II chondrules are a proxy for the degree of whole‐rock aqueous alteration. The texture and composition of sulfide‐bearing opaque minerals in Graves Nunataks 06100 and Grosvenor Mountains 03116 suggest that they are the most thermally altered CR chondrites.     

Opaque assemblages in CR2 Graves Nunataks (GRA) 06100 as indicators of shock‐driven hydrothermal alteration in the CR chondrite parent body

We have studied the petrologic characteristics of sulfide‐metal lodes, polymineralic Fe‐Ni nodules, and opaque assemblages in the CR2 chondrite Graves Nunataks (GRA) 06100, one of the most altered CR chondrites. Unlike low petrologic type CR chondrites, alteration of metal appears to have played a central role in the formation of secondary minerals in GRA 06100. Differences in the mineralogy and chemical compositions of materials in GRA 06100 suggest that it experienced higher temperatures than other CR2 chondrites. Mineralogic features indicative of high temperature include: (1) exsolution of Ni‐poor and Ni‐rich metal from nebular kamacite; (2) formation of sulfides, oxides, and phosphates; (3) changes in the Co/Ni ratios; and (4) carbidization of Fe‐Ni metal. The conspicuous absence of pentlandite may indicate that peak temperatures exceeded 600 °C. Opaques appear to have been affected by the action of aqueous fluids that resulted in the formation of abundant oxides, Fe‐rich carbonates, including endmember ankerite, and the sulfide‐silicate‐phosphate scorzalite. We suggest that these materials formed via impact‐driven metamorphism. Mineralogic features indicative of impact metamorphism include (1) the presence of sulfide‐metal lodes; (2) the abundance of polymineralic opaque assemblages with mosaic‐like textures; and (3) the presence of suessite. Initial shock metamorphism probably resulted in replacement of nebular Fe‐Ni metal in chondrules and in matrix by Ni‐rich, Co‐rich Fe metal, Al‐Ti‐Cr‐rich alloys, and Fe sulfides, while subsequent hydrothermal alteration produced accessory oxides, phosphates, and Fe carbonates. An extensive network of sulfide‐metal veins permitted effective exchange of siderophile elements from pre‐existing metal nodules with adjacent chondrules and matrix, resulting in unusually high Fe contents in these objects.     

Aqueous alteration of kamacite in CM chondrites

Abstract– The study of aqueous alteration of kamacite in CM chondrites provides insight on the conditions, products, and relative timing of aqueous alteration. We studied unaltered, partially altered, and fully altered kamacite grains from Murray, Murchison, Cold Bokkeveld, and Nogoya using optical microscopy, electron microprobe analysis, scanning electron microscopy, and Raman spectroscopy. From textual evidence and chemical analysis, we established three separate microchemical environments. 1) In a microchemical environment with a high S activity, kamacite alters to form tochilinite, P‐bearing sulfides, eskolaite, and schreibersite. Mass balance calculations show that 81% of the Fe in kamacite is removed from the alteration region, making it available for the formation of other minerals or Fe‐rich aureoles. The release of Fe can alter the mesostasis of type‐I chondrules forming cronstedtite. 2) In a microchemical environment with a high Si activity and a low S activity, kamacite alters to form cronstedtite with small accessory sulfide inclusions. 3) A microchemical environment with limited S and Si activity results in kamacite alteration forming magnetite. The resulting magnetite retains associated Ni that can distinguish it from precipitated magnetite. In addition, the accessory phases of pentlandite and apatite can be formed if S or Ca are present. Finally, we note that small tochilinite grains in the matrix lack typical Ni, P, and Co levels, suggesting that they did not form from kamacite but possibly by sulfidization of magnetite.     

Altered primary iron sulfides in CM2 and CR2 carbonaceous chondrites: Insights into parent body processes

The presence of primary iron sulfides that appear to be aqueously altered in CM and CR carbonaceous chondrites provides the potential to study the effects and, by extension, the conditions of aqueous alteration. In this work, we have used SEM, TEM, and EPMA techniques to characterize primary sulfides that show evidence of secondary alteration. The alteration styles consist of primary pyrrhotite altering to secondary pentlandite (CMs only), magnetite (CMs and CRs), and phyllosilicates (CMs only) in grains that initially formed by crystallization from immiscible sulfide melts in chondrules (pyrrhotite‐pentlandite intergrowth [PPI] grains). Textural, microstructural, and compositional data from altered sulfides in a suite of CM and CR chondrites have been used to constrain the conditions of alteration of these grains and determine their alteration mechanisms. This work shows that the PPI grains exhibit two styles of alteration—one to form porous pyrrhotite‐pentlandite (3P) grains by dissolution of precursor PPI grain pyrrhotite and subsequent secondary pentlandite precipitation (CMs only), and the other to form the altered PPI grains by pseudomorphic replacement of primary pyrrhotite by magnetite (CMs and CRs) or phyllosilicates (CMs only). The range of alteration textures and products is the result of differences in conditions of alteration due to the role of microchemical environments and/or brecciation. Our observations show that primary sulfides are sensitive indicators of aqueous alteration processes in CM and CR chondrites.     

Primary iron sulfides in CM and CR carbonaceous chondrites: Insights into nebular processes

We have carried out a systematic study involving SEM, EPMA, and TEM analyses to determine the textures and compositions of sulfides and sulfide–metal assemblages in a suite of minimally to weakly altered CM and CR carbonaceous chondrites. We have attempted to constrain the distribution and origin of primary sulfides that formed in the solar nebula, rather than by secondary asteroidal alteration processes. Our study focused primarily on sulfide assemblages associated with chondrules, but also examined some occurrences of sulfides within the matrices of these meteorites. Although sulfides are a minor phase in carbonaceous chondrites, we have determined that primary sulfide grains are actually a major proportion of the sulfide grains in weakly altered CM chondrites and have survived aqueous alteration relatively unscathed. In minimally altered CR chondrites, we have determined that essentially all of the sulfides are of primary origin, confirming the observations of Schrader et al. ( 2015 ). The pyrrhotite–pentlandite intergrowth (PPI) grains formed from crystallization of monosulfide solid solution (mss) melts, while sulfide-rimmed metal (SRM) grains formed from sulfidization of Fe,Ni metal. Micron-sized metal inclusions in some PPI grains may have formed by co-crystallization of metal and sulfide from a sulfide melt that experienced S volatilization during the chondrule formation event, or alternatively, may be a remnant of sulfidization of Fe,Ni metal that also occurred during chondrule formation. Sulfur fugacity for SRM grains ranged from −18 to −10 (log units) largely in agreement with predicted solar nebular values. Our observations show that understanding the formation mechanisms of primary sulfide grains provides clues to solar nebular conditions, such as the sulfur fugacity during chondrule formation.     

Multiple precursors of secondary mineralogical assemblages in CM chondrites

We report a petrographic and mineralogical survey of tochilinite/cronstedtite intergrowths (TCIs) in Paris, a new CM chondrite considered to be the least altered CM identified to date. Our results indicate that type‐I TCIs consist of compact tochilinite/cronstedtite rims surrounding Fe‐Ni metal beads, thus confirming kamacite as the precursor of type‐I TCIs. In contrast, type‐II TCIs are characterized by complex compositional zoning composed of three different Fe‐bearing secondary minerals: from the outside inwards, tochilinite, cronstedtite, and amakinite. Type‐II TCIs present well‐developed faces that allow a detailed morphological analysis to be performed in order to identify the precursors. The results demonstrate that type‐II TCIs formed by pseudomorphism of the anhydrous silicates, olivine, and pyroxene. Hence, there is no apparent genetic relationship between type‐I and type‐II TCIs. In addition, the complex chemical zoning observed within type‐II TCIs suggests that the alteration conditions evolved dramatically over time. At least three stages of alteration can be proposed, characterized by alteration fluids with varying compositions (1) Fe‐ and S‐rich fluids; (2) S‐poor and Fe‐ and Si‐rich fluids; and (3) S‐ and Si‐poor, Fe‐rich fluids. The presence of unaltered silicates in close association with euhedral type‐II TCIs suggests the existence of microenvironments during the first alteration stages of CM chondrites. In addition, the absence of Mg‐bearing secondary minerals in Paris TCIs suggests that the Mg content increases during the course of alteration.     

A comparative study of opaque phases in Qingzhen (EH3) and MacAlpine Hills 88136 (EL3): Representatives of EH and EL parent bodies

Abstract— Opaque minerals in the Qingzhen (EH3) and MacAlpine Hills (MAC) 88136 (EL3) enstatite chondrites were studied and compared with other EH and EL chondrites. All opaque minerals usually occur in multi‐sulfide‐metal clasts and nodules in the matrix between chondrules (El Goresy et al., 1988). The higher abundance of opaque minerals, the occurrence of niningerite and various alkali‐sulfides (e.g., caswellsilverite, phases A and B, djerfisherite) are diagnostic criteria for EH chondrites, while alabandite is characteristic for EL chondrites. In addition, EH chondrites are characterized by enrichments of Si in both kamacite and perryite, and alkali elements in sphalerite and chalcopyrite. The Mn contents of daubreelite and sphalerite are lower in EH than in EL chondrites. These are consistent with lower oxygen fugacity and higher H₂S fugacity of EH than EL chondrites. In contrast, the discovery of sphalerite and Zn‐rich daubreelite in MAC 88136 indicates that their absence in EL6 chondrites is probably related to thermal metamorphism in the parent body. Schreibersite microspherules are commonly enclosed in most sulfides in Qingzhen, but are absent in MAC 88136. They were once molten, and probably predated all sulfide host phases. The petrographic setting and chemical compositions of the sulfide hosts of the schreibersite microspherules in EH3 chondrites are consistent with formation by condensation. The earliest sulfide condensates oldhamite and niningerite occupy the interiors of the clasts and nodules, whereas the rims consist of troilite and djerfisherite. In addition, in Qingzhen, some other troilite, djerfisherite and sphalerite assemblages coexist with perryite. They were produced by sulfurization of metallic Fe‐Ni in the nebula. In MAC 88136, sulfurization of Si‐bearing Fe‐Ni metal is less pronounced, and it produced troilite, schreibersite and less abundant perryite. Two kinds of normal zoning and a reverse zoning trends of niningerite, and both normal and reverse zoning of sphalerite were found in clasts and nodules in Qingzhen. The coexistence of normal and reverse zoning profiles in niningerite grains in the same meteorite strongly suggests that they formed before accretion in the parent body, because an asteroidal metamorphic or an impact event in the parent body would have erased these contrasting profiles and destroyed the textural settings. In contrast, alabandite in MAC 88136 shows only normal zoning, with the FeS content decreasing to 9.3 mol% toward troilite, indicating very slow cooling at low temperature.     

P‐O‐rich sulfide phase in CM chondrites: Constraints on its origin on the CM parent body

CM chondrites are a group of primitive meteorites that have recorded the alteration history of the early solar system. We report the occurrence, chemistry, and oxygen isotopic compositions of P‐O‐rich sulfide phase in two CM chondrites (Grove Mountains [GRV] 021536 and Murchison). This P‐O‐rich sulfide is a polycrystalline aggregate of nanometer‐size grains. It occurs as isolated particles or aggregates in both CM chondrites. These grains, in the matrix and in type‐I chondrules from Murchison, were partially altered into tochilinite; however, grains enclosed by Ca‐carbonate are much less altered. This P‐O‐rich sulfide in Murchison is closely associated with magnetite, FeNi phosphide, brezinaite (Cr₃S₄), and eskolaite (Cr₂O₃). In addition to sulfur as the major component, this sulfide contains ~6.3 wt% O, ~5.4 wt% P, and minor amounts of hydrogen. Analyses of oxygen isotopes by SIMS resulted in an average δ¹⁸O value of ?22.5 ‰ and an average Δ¹⁷O value of 0.2 ± 9.2 ‰ (2σ). Limited variations in both chemical compositions and electron‐diffraction patterns imply that the P‐O‐rich sulfide may be a single phase rather than a polyphase mixture. Several features indicate that this P‐O‐rich sulfide phase formed at low temperature on the parent body, most likely through the alteration of FeNi metal (a) close association with other low‐temperature alteration products, (b) the presence of hydrogen, (c) high Δ¹⁷O values and the presence in altered mesostasis of type‐I chondrules and absence in type‐II chondrules. The textural relations of the P‐O‐rich sulfide and other low‐temperature minerals reveal at least three episodic‐alteration events on the parent body of CM chondrites (1) formation of P‐O‐rich sulfide during sulfur‐rich aqueous alteration of P‐rich FeNi metal, (2) formation of Ca‐carbonate during local carbonation, and (3) alteration of P‐O‐rich sulfide and formation of tochilinite during a period of late‐stage intensive aqueous alteration.     

Origin of kamacite,schreibersite, and perryite in metal‐sulfide nodules of the enstatite chondrite Sahara 97072 (EH3)

Abstract– Perryite [(Fe,Ni)_x(Si,P)_y], schreibersite [(Fe,Ni)₃P], and kamacite (αFeNi) are constituent minerals of the metal‐sulfide nodules in the Sahara 97072 (EH3) enstatite chondrite meteorite. We have measured concentrations of Ni, Cu, Ga, Au, Ir, Ru, and Pd in these minerals with laser ablation, inductively coupled plasma mass spectrometry (ICP‐MS). We also measured their Fe, Ni, P, Si, and Co concentrations with electron microprobe. In kamacite, ratios of Ru/Ir, Pd/Ir, and Pd/Ru cluster around their respective CI values and all elements analyzed plot near the intersection of the equilibrium condensation trajectory versus Ni and the respective CI ratios. In schreibersite, the Pd/Ru ratio is near the CI value and perryite contains significant Cu, Ga, and Pd. We propose that schreibersite and perryite formed separately near the condensation temperatures of P and Si in a reduced gas and were incorporated into Fe‐Ni alloy. Upon further cooling, sulfidation of Fe in kamacite resulted in the formation of additional perryite at the sulfide interface. Still later, transient heating re‐melted this perryite near the Fe‐FeS eutectic temperature during partial melting of the metal‐sulfide nodules. The metal‐sulfide nodules are pre‐accretionary objects that retain CI ratios of most siderophile elements, although they have experienced transient heating events.     

The Paris CM chondrite: Secondary minerals and asteroidal processing

We report a petrographic and mineralogical survey of Paris, a new CM chondrite considered to be the least‐altered CM identified so far (Hewins et al. 2014 ). Compared to other CMs, Paris exhibits (1) a higher concentration of Fe‐Ni metal beads, with nickel contents in the range 4.1–8.1 wt%; (2) the systematic presence of thin lamellae and tiny blebs of pentlandite in pyrrhotite grains; and (3) ubiquitous tochilinite/cronstedtite associations with higher FeO/SiO₂ and S/SiO₂ ratios. In addition, Paris shows the highest concentration of trapped ³⁶Ar reported so far for a CM chondrite (Hewins et al. 2014 ). In combination with the findings of previous studies, our data confirm the reliability of (1) the alteration sequence based on the chemical composition of tochilinite/cronstedtite associations to quantify the fluid alteration processes and (2) the use of Cr content variability in type II ferroan chondrule olivine as a proxy of thermal metamorphism. In contrast, the scales based on (1) the Fe³⁺ content of serpentine in the matrix to estimate the degree of aqueous alteration and (2) the chemical composition of Fe‐Ni metal beads for quantifying the intensity of the thermal metamorphism are not supported by the characteristics of Paris. It also appears that the amount of trapped ³⁶Ar is a sensitive indicator of the secondary alteration modifications experienced by chondrites, for both aqueous alteration and thermal metamorphism. Considering Paris, our data suggest that this chondrite should be classified as type 2.7 as it suffered limited but significant fluid alteration and only mild thermal metamorphism. These results point out that two separated scales should be used to quantify the degree of the respective role of aqueous alteration and thermal metamorphism in establishing the characteristics of CM chondrites.     

Carbonates in CM chondrites: Complex formational histories and comparison to carbonates in CI chondrites

Abstract– CM chondrites are primitive solar‐system materials that have undergone high degrees of aqueous alteration, resulting in the formation of secondary minerals including carbonates. Two different carbonate minerals (calcite/aragonite and dolomite) together constitute 1.4–2.8 vol% of CM chondrites. In contrast, CI chondrites contain four different carbonate minerals: calcite/aragonite, dolomite, breunnerite, and siderite. CI chondrites have abundant dolomite, a mineral that seems to be absent in the most aqueously altered CM chondrites. In this study, carbonates in seven CM chondrites (Y‐791198, LaPaz Icefield 04796, Cold Bokkeveld, Nogoya, Queen Alexandra Range 93005, Allan Hills 83100, and Meteorite Hills 01070) were studied petrographically and by electron microprobe. The results indicate that carbonate formation in CM chondrites differs from that in CI chondrites and is more complex than previously recognized. Our studies of CM chondrites indicate that (1) carbonates formed on the parent asteroid in an aqueous environment that gradually changed in composition, (2) at some stage, Ca and Mg activities in the environment were high enough to form metastable dolomite, and (3) dolomites disappeared in the most aqueously altered CM chondrites.     

The fate of primary iron sulfides in the CM1 carbonaceous chondrites: Effects of advanced aqueous alteration on primary components

We have carried out a SEM-EPMA-TEM study to determine the textures and compositions of relict primary iron sulfides and their alteration products in a suite of moderately to heavily altered CM1 carbonaceous chondrites. We observed four textural groups of altered primary iron sulfides: (1) pentlandite+phyllosilicate (2P) grains, characterized by pentlandite with submicron lenses of phyllosilicates; (2) pyrrhotite+pentlandite+magnetite (PPM) grains, characterized by pyrrhotite–pentlandite exsolution textures with magnetite veining and secondary pentlandite; (3) pentlandite+serpentine (PS) grains, characterized by relict pentlandite exsolution, serpentine, and secondary pentlandite; and (4) pyrrhotite+pentlandite+magnetite+serpentine (PPMS) grains, characterized by features of both the PPM and PS grains. We have determined that all four groups were initially primary iron sulfides, which formed from crystallization of immiscible sulfide melts within silicate chondrules in the solar nebula. The fact that such different alteration products could result from the same precursor sulfides within even the same meteorite sample further underscores the complexity of the aqueous alteration environment for the CM chondrites. The different alteration reactions for each textural group place constraints on the mechanisms and conditions of alteration with evidence for acidic environments, oxidizing environments, and changing fluid compositions (Ni-bearing and Si-Mg-bearing).     

The nanoscale mineralogy of Fe,Ni sulfides in pristine and metamorphosed CM and CM/CI‐like chondrites: Tapping a petrogenetic record

We have sampled sulfide grains from one pristine CM2 chondrite (Yamato [Y‐] 791198), one thermally metamorphosed CM2 chondrite (Y‐793321), and two anomalous, metamorphosed CM/CI‐like chondrites (Y‐86720 and Belgica [B‐] 7904) by the focused ion beam (FIB) technique and studied them by analytical transmission electron microscopy (TEM). Our study aims at exploring the potential of sulfide assemblages and microstructures to decipher processes and conditions of chondrite petrogenesis. Complex exsolution textures of pyrrhotite (crystallographic NC‐type with N ≈ 6), troilite, and pentlandite occur in grains of Y‐791198 and Y‐793321. Additionally, polycrystalline 4C‐pyrrhotite‐pentlandite‐magnetite aggregates occur in Y‐791198, pointing to diverse conditions of gas–solid interactions in the solar nebula. Coarser exsolution textures of Y‐793321 grains indicate higher long‐term average temperatures in the <100 °C range compared to Y‐791198 and other CM chondrites. Sulfide mineralogy of Y‐86720 and B‐7904 is dominated by aggregates of pure troilite and metal, indicating metamorphic equilibration at sulfur fugacities (fS₂) of the iron‐troilite buffer. Absence of magnetite in equilibrium with sulfide and metal in Y‐86720 indicates higher peak temperatures compared with B‐7904, in which coexistence of troilite, metal, and magnetite constrains metamorphic temperature to less than 570 °C. NC‐pyrrhotite occurs in both meteorites as nm‐wide rims on troilite grains and, together with frequent anhydrite, indicates a retrograde metamorphic stage at higher fS₂ slightly above the fayalite‐magnetite‐quartz‐pyrrhotite buffer. Fine‐grained troilite‐olivine intergrowths in both meteorites suggest the pre‐metamorphic presence of tochilinite‐serpentine interlayer phases, pointing to mineralogical CM affinity. Pseudomorphs after euhedral pyrrhotite crystals in Y‐86720 in turn suggest CI affinity as do previously published O isotopic data of both meteorites.     

Mineralogy,petrography, bulk chemical,iodine-xenon,and oxygen-isotopic compositions of dark inclusions in the reduced CV3 chondrite Efremovka

Abstract— We studied the petrography, mineralogy, bulk chemical, I-Xe, and O-isotopic compositions of three dark inclusions (E39, E53, and E80) in the reduced CV3 chondrite Efremovka. They consist of chondrules, calcium-aluminum-rich inclusions (CAIs), and fine-grained matrix. Primary minerals in chondrules and CAIs are pseudomorphed to various degrees by a mixture largely composed of abundant (>95%), fine-grained (>0.2 μm) fayalitic olivine (Fa_35–42) and minor amounts of chlorite, poorly-crystalline Si-Al-rich material, and chromite; chondrule and CAI shapes and textures are well-preserved. Secondary Ca-rich minerals (Ti-andradite, kirschsteinite, Fe-diopside) are common in chondrule pseudomorphs and matrices in E39 and E80. The degree of replacement increases from E53 to E39 to E80. Fayalitic olivines are heavily strained and contain abundant voids similar to those in incompletely dehydrated phyllosilicates in metamorphosed CM and CI chondrites. Opaque nodules in chondrules consist of Ni- and Co-rich taenite, Co-rich kamacite, and wairauite; sulfides are rare; magnetite is absent. Bulk O-isotopic compositions of E39 and E53 plot in the field of aqueously altered CM chondrites, close to the terrestrial fractionation line; the more heavily altered E39 is isotopically heavier than the less altered E53. The apparent I-Xe age of E53 is 5.4 Ma earlier than Bjurböle and 5.7 ± 2.0 Ma earlier than E39. The I-Xe data are consistent with the most heavily altered dark inclusion, E39 having experienced either longer or later alteration than E53. Bulk lithophile elements in E39 and E53 most closely match those of CO chondrites, except that Ca is depleted and K and As are enriched. Both inclusions are depleted in Se by factors of 3–5 compared to mean CO, CV, CR, or CK chondrites. Zinc in E39 is lower than the mean of any carbonaceous chondrite groups, but in E53 Zn is similar to the means in CO, CV, and CK chondrites. The Efremovka dark inclusions experienced various degrees of aqueous alteration, followed by low degree thermal metamorphism in an asteroidal environment. These processes resulted in preferential oxidation of Fe from opaque nodules and formation of Ni- and Co-rich metal, metasomatic alteration of primary minerals in chondrules and CAIs, and the formation of fayalitic olivine and secondary Ca-Fe-rich minerals. Based on the observed similarities of the alteration mineralization in the Efremovka and Allende dark inclusions, we infer that the latter may have experienced similar alteration processes.     

Fe‐Ni metal in primitive chondrites: Indicators of classification and metamorphic conditions for ordinary and CO chondrites

Abstract— We report the results of our petrological and mineralogical study of Fe‐Ni metal in type 3 ordinary and CO chondrites, and the ungrouped carbonaceous chondrite Acfer 094. Fe‐Ni metal in ordinary and CO chondrites occurs in chondrule interiors, on chondrule surfaces, and as isolated grains in the matrix. Isolated Ni‐rich metal in chondrites of petrologic type lower than type 3.10 is enriched in Co relative to the kamacite in chondrules. However, Ni‐rich metal in type 3.15–3.9 chondrites always contains less Co than does kamacite. Fe‐Ni metal grains in chondrules in Semarkona typically show plessitic intergrowths consisting of submicrometer kamacite and Ni‐rich regions. Metal in other type 3 chondrites is composed of fine‐ to coarse‐grained aggregates of kamacite and Ni‐rich metal, resulting from metamorphism in the parent body. We found that the number density of Ni‐rich grains in metal (number of Ni‐rich grains per unit area of metal) in chondrules systematically decreases with increasing petrologic type. Thus, Fe‐Ni metal is a highly sensitive recorder of metamorphism in ordinary and carbonaceous chondrites, and can be used to distinguish petrologic type and identify the least thermally metamorphosed chondrites. Among the known ordinary and CO chondrites, Semarkona is the most primitive. The range of metamorphic temperatures were similar for type 3 ordinary and CO chondrites, despite them having different parent bodies. Most Fe‐Ni metal in Acfer 094 is martensite, and it preserves primary features. The degree of metamorphism is lower in Acfer 094, a true type 3.00 chondrite, than in Semarkona, which should be reclassified as type 3.01.     

Ordinary chondrite metallography: Part 2. Formation of zoned and unzoned metal particles in relatively unshocked H,L, and LL chondrites

Abstract— We studied the metallography of Fe‐Ni metal particles in 17 relatively unshocked ordinary chondrites and interpreted their microstructures using the results of P‐free, Fe‐Ni alloy cooling experiments (described in Reisener and Goldstein 2003). Two types of Fe‐Ni metal particles were observed in the chondrites: zoned taenite + kamacite particles and zoneless plessite particles, which lack systematic Ni zoning and consist of tetrataenite in a kamacite matrix. Both types of metal particles formed during metamorphism in a parent body from homogeneous, P‐poor taenite grains. The phase transformations during cooling from peak metamorphic temperatures were controlled by the presence or absence of grain boundaries in the taenite particles. Polycrystalline taenite particles transformed to zoned taenite + kamacite particles by kamacite nucleation at taenite/taenite grain boundaries during cooling. Monocrystalline taenite particles transformed to zoneless plessite particles by martensite formation and subsequent martensite decomposition to tetrataenite and kamacite during the same cooling process. The varying proportions of zoned taenite + kamacite particles and zoneless plessite particles in types 4–6 ordinary chondrites can be attributed to the conversion of polycrystalline taenite to monocrystalline taenite during metamorphism. Type 4 chondrites have no zoneless plessite particles because metamorphism was not intense enough to form monocrystalline taenite particles. Type 6 chondrites have larger and more abundant zoneless plessite particles than type 5 chondrites because intense metamorphism in type 6 chondrites generated more monocrystalline taenite particles. The distribution of zoneless plessite particles in ordinary chondrites is entirely consistent with our understanding of Fe‐Ni alloy phase transformations during cooling. The distribution cannot be explained by hot accretion‐autometamorphism, post‐metamorphic brecciation, or shock processing.     

Mineralogy of iron sulfides in CM1 and CI1 lithologies of the Kaidun breccia: Records of extreme to intense hydrothermal alteration

The polymict Kaidun microbreccia contains lithologies of C‐type chondrites with euhedral iron sulfide crystals of hydrothermal origin. Our FIB‐TEM study reveals that acicular sulfides in a CM1 lithology are composed of Fe‐rich pyrrhotite with nonintegral vacancy superstructures (NC‐pyrrhotite), troilite, and pentlandite, all showing distinct exsolution textures. Based on phase relations in the Fe‐Ni‐S system, we constrain the temperature of formation of the originally homogeneous monosulfide solid solution to the range of 100–300 °C. In some crystals the exsolution of pentlandite and the microtextural equilibration was incomplete, probably due to rapid cooling. We use thermodynamic modeling to constrain the physicochemical conditions of the extreme hydrothermal alteration in this lithology. Unless the CM1 lithology was sourced from a large depth in the parent body (internal pressure >85 bar) or the temperatures were in the lower range of the interval determined, the water was likely present as vapor. Previously described light δ³⁴S compositions of sulfides in Kaidun's CM1 lithology are likely due to the loss of ³⁴S‐enriched H₂S during boiling. Platy sulfide crystals in an adjacent, intensely altered CI1 lithology are composed of Fe‐poor, monoclinic 4C‐pyrrhotite and NC‐pyrrhotite and probably formed at lower temperatures and higher fS₂ relative to the CM1 lithology. However, a better understanding of the stability of Fe‐poor pyrrhotites at temperatures below 300 °C is required to better constrain these conditions.     

Primordial and cosmogenic noble gases in the Sutter's Mill CM chondrite

The Sutter's Mill (SM) CM chondrite fell in California in 2012. The CM chondrite group is one of the most primitive, consisting of unequilibrated minerals, but some of them have experienced complex processes occurring on their parent body, such as aqueous alteration, thermal metamorphism, brecciation, and solar wind implantation. We have determined noble gas concentrations and isotopic compositions for SM samples using a stepped heating gas extraction method, in addition to mineralogical observation of the specimens. The primordial noble gas abundances, especially the P3 component trapped in presolar diamonds, confirm the classification of SM as a CM chondrite. The mineralogical features of SM indicate that it experienced mild thermal alteration after aqueous alteration. The heating temperature is estimated to be <350 °C based on the release profile of primordial ³⁶Ar. The presence of a Ni‐rich Fe‐Ni metal suggests that a minor part of SM has experienced heating at >500 °C. The variation in the heating temperature of thermal alteration is consistent with the texture as a breccia. The heterogeneous distribution of solar wind noble gases is also consistent with it. The cosmic‐ray exposure (CRE) age for SM is calculated to be 0.059 ± 0.023 Myr based on cosmogenic ²¹Ne by considering trapped noble gases as solar wind, the terrestrial atmosphere, P1 (or Q), P3, A2, and G components. The CRE age lies at the shorter end of the CRE age distribution of the CM chondrite group.     

Northwest Africa 11024—A heated and dehydrated unique carbonaceous (CM) chondrite

Based on the high abundance of fine‐grained material and its dark appearance, NWA 11024 was recognized as a CM chondrite, which is also confirmed by oxygen isotope measurements. But contrary to known CM chondrites, the typical phases indicating aqueous alteration (e.g., phyllosilicates, carbonates) are missing. Using multiple analytical techniques, this study reveals the differences and similarities to known CM chondrites and will discuss the possibility that NWA 11024 is the first type 3 CM chondrite. During the investigation, two texturally apparent tochilinite–cronstedtite intergrowths were identified within two thin sections. However, the former phyllosilicates were recrystallized to Fe‐rich olivine during a heating event without changing the textural appearance. A peak temperature of 400–600 °C is estimated, which is not high enough to destroy or recrystallize calcite grains. Thus, calcites were never constituents of the mineral paragenesis. Another remarkable feature of NWA 11024 is the occurrence of unknown clot‐like inclusions (UCLIs) within fine‐grained rims, which are unique in this clarity. Their density and S concentration are significantly higher than of the surrounding fine‐grained rim and UCLIs can be seen as primary objects that were not formed by secondary alteration processes inside the rims. Similarities to chondritic and cometary interplanetary dust particles suggest an ice‐rich first‐generation planetesimal for their origin. In the earliest evolution, NWA 11024 experienced the lowest degree of aqueous alteration of all known CM chondrites and subsequently, a heating event dehydrated the sample. We suggest to classify the meteorite NWA 11024 as the first type 3 CM chondrite similar to the classification of CV3 chondrites (like Allende) that could also have lost their matrix phyllosilicates by thermal dehydration.     

Ordinary chondrite metallography: Part 1. Fe‐Ni taenite cooling experiments

Abstract— Cooling rate experiments were performed on P‐free Fe‐Ni alloys that are compositionally similar to ordinary chondrite metal to study the taenite ? taenite + kamacite reaction. The role of taenite grain boundaries and the effect of adding Co and S to Fe‐Ni alloys were investigated. In P‐free alloys, kamacite nucleates at taenite/taenite grain boundaries, taenite triple junctions, and taenite grain corners. Grain boundary diffusion enables growth of kamacite grain boundary precipitates into one of the parent taenite grains. Likely, grain boundary nucleation and grain boundary diffusion are the applicable mechanisms for the development of the microstructure of much of the metal in ordinary chondrites. No intragranular (matrix) kamacite precipitates are observed in P‐free Fe‐Ni alloys. The absence of intragranular kamacite indicates that P‐free, monocrystalline taenite particles will transform to martensite upon cooling. This transformation process could explain the metallography of zoneless plessite particles observed in H and L chondrites. In P‐bearing Fe‐Ni alloys and iron meteorites, kamacite precipitates can nucleate both on taenite grain boundaries and intragranularly as Widmanstätten kamacite plates. Therefore, P‐free chondritic metal and P‐bearing iron meteorite/pallasite metal are controlled by different chemical systems and different types of taenite transformation processes.