首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 0 毫秒
1.
The Southeast Anatolian orogen is a part of the eastern Mediterranean-Himalayan orogenic belt. Development of the Southeast Anatolian orogen began with the first ophiolite obduction onto the Arabian platform during the Late Cretaceous, and it continued until the Miocene. Its lingering effects continue to be discernible at present. During the Late Cretaceous-Miocene interval, three major deformational phases occurred, related to Late Cretaceous, Eocene, and Miocene nappe emplacements. The Miocene nappes are composed of ophiolites and metamorphic massifs.

For a decade, field studies in the region have shown that strike-slip tectonics played a role complementary to the major horizontal effects of the nappe movement, as indicated by: (1) fault systems active during the Eocene; (2) different Eocene rock units composed of coeval continental and deep-sea deposits and presently tectonically juxtaposed; and (3) other stratigraphic and structural data obtained across the present strike-slip fault zones.

These strike-slip faults possibly resulted from oblique subduction of the mid-oceanic ridge underneath the northerly situated Yuksekova ensimatic island-arc complex, causing a gradual cessation of the island-arc system. The subduction also led to the development of a back-arc pull-apart basin, i.e., the Maden basin, which opened on the upper plate. The geologic history in Southeast Anatolia resembles the development of the San Andreas fault system and subsequent tectonic evolution.  相似文献   

2.
Early Cenozoic magmatism in the eastern Sakarya Zone (NE Turkey) provides an important constraint on the regional tectono-magmatic evolution of the region. Early Eocene syn-collisional adakitic rocks are observed as small stocks with outcropping areas commonly less than 10 km2. This study presents petrography, whole-rock geochemistry and Sr-Nd-Pb isotope data, as well as in-situ 40Ar/39Ar age constraints on one of these adakitic andesites in the Altınpınar area of Gümüşhane, and discusses source region, petrological processes and geodynamic setting prevailed during their genesis. Andesites commonly show microlitic porphyric and vitrophyric porphyric textures, and include significant amounts of mafic microgranular enclaves (MMEs). Plagioclase, hornblende, Fe-Ti oxides and minor pyroxene are the main mineral phases. In-situ 40Ar-39Ar amphibole dating constrains the cooling age of andesites into a time span from 52.8 ± 1.3–48.8 ± 1.9 Ma. Andesites are medium to high-K calc-alkaline and display most of the signatures typical of those of the adakites. They are characterized by moderate MgO (1.7–4.1 wt%), low Y (9−14 ppm), Yb (0.9–1.5 ppm), and HREE and high Sr (325−964 ppm) contents, and high Sr/Y (36–76) ratios. 87Sr/86Sr(t) (0.704948−0.705100) and 143Nd/144Nd(t) (0.512588−0.512628) ratios are in the isotopic range of the adakites. All these geochemical and isotopic data suggest that the parental magma of adakitic andesites has been produced by partial melting of oceanic basalts under amphibole-eclogite facies conditions during the breakoff of the northern Neotethyan oceanic slab.  相似文献   

3.
Dams constructed on the seismically active regions have a high-risk potential for downstream life and property. Strong ground motion can result in instability of the dam and strength loss of foundation. Active faults within the foundation of dam have the potential to cause damaging displacement of the structures. Appropriate design measures should be considered to obtain rational solution to the problem of catastrophic release of water from the reservoir, and especially to resist earthquake loads. Safety concerns for dams under the earthquake loads involve the seismic hazard evaluation of dam site for the overall stability of structure. Various types of analyses can be used, ranging from a simplified analysis to more complex procedures based on ground motion parameters and response spectra. This paper briefly evaluates seismic hazard analyses for dam structures, and introduces the analyses for thirty-six dams with height ranging from 15 to 195 m in Kızılırmak basin, Turkey. The seismic hazard analyses have indicated that peak ground acceleration varies within a wide range (0.09–0.45 g) for the dam sites of the basin.  相似文献   

4.
S?cak Çermik (Sivas) is an important geothermal and recent travertine formation area in Central Anatolia. The majority of travertines found in the region comprise fissure-ridge type travertines according to morphological classification. At the location called Tepe Çermik within the travertine area, fill containing fossil bone fragments of Equus sp., Bovidae and other abundant animals formed within the fracture axis of a N–S striking fissure-ridge travertine developed under control of tectonic forces. The finds of these fossils in fissure-ridge travertines linked to tectonic forces indicates formation of a unique fossil environment created under the control of these forces. The Accelerator Mass Spectrometry Radiocarbon Dating analyses of fossils from the study area determined the fills were older than 43,000 years. The U/Th age of a sample from the most recently-formed banded travertine in the axis of the fracture was identified as 278,540 ± 18,436 years. As a result, the ages of fossils found within this fill are thought to be between 43,000 and 278,540 ± 18,436 years old. The high amount of perissodactyla and artiodactyla fossils found within fill in the axis of the fissure-ridge travertine probably indicates the presence of hominids who chose the region for hunting or settlement. The Equus sp. and Bovidae fossil samples found in the axis of the fracture indicate that in the dry and cold glacial period the paleogeography in a large portion of Anatolia comprised desert-like steppe.  相似文献   

5.
The fossil forest in the Çaml?dere-Çeltikçi-Güdül region of the province of Ankara in Turkey has a large number of petrified coniferous and oak tree remains. Petrification occurred in volcanic ashes and tuffs with permineralization, and Fe, Mg, Ca and Ni ions played important roles in the substitution of Si for C. However, the petrified wood samples are heterogeneous in colouration, weight, toughness, and durability, despite being obtained from the same source. Those features are very important for end-users because petrified woods, if cut and polished, are used widely as both decorative indoor tiles and gemstone objects, but heterogeneous materials suffer large wastage while they are being worked and used.Chemical analyses, specific gravity measurements, polarizing microscope studies, X-ray diffraction patterns, and scanning electron image evaluations were performed to classify and identify the homogenous material of the petrified woods relating to its physical and mineralogical characteristics.The different characteristics of the petrified wood samples are due to their varying inner structures, which depend on the replacement silica-building phases and their ratios, and silica particle sizes. Thin sections and XRD patterns revealed that petrified woods in the region were silicified by replacement with both chalcedonic quartz components, including chalcedony (length-fast quartz), moganite and orthorhombic-silica (length-slow quartz), and opalline quartz components including opal-CT and opal-C (length-slow quartz). The scanning electron microscope images were shown that the internal structures of the petrified woods consist of mostly submicron-sized (100–800 nm), and partially nano-sized (60–120 nm) silica-building particles.So, the petrified wood samples can be firstly classified into five main-groups based on their colourations and specific gravity values, then, into three sub-groups based on the principal chalcedonic and opalline quartz silica-building phases and related particle sizes, and also weighing, toughness, and durability. In the first group (samples 1, 2, and 3), the crystallinity gradation of the petrified woods can be classified as quasi-coarse crystalline because they include mainly chalcedony and moganite phases with 800–200 nm ranging in particle size. They are heavy, tough, and resistance as a material, as shown by specific gravity values of 2.60, 2.56, and 2.54, respectively. In the second group (sample 4), the crystallinity gradation of the petrified wood can be classified as quasi-fine crystalline because it includes mainly o-silica and moganite phases with 400–100 nm ranging in particle size. It is medium-heavy, semi-tough and quasi-resistance as a material, as shown by a specific gravity value of 2.42. In the third group (sample 5), the crystallinity gradation of the petrified wood can be classified as quasi-nano-crystalline because it includes mainly opal-CT and opal-C phases with 120–60 nm ranging in particle size. The material is slight, brittle, and weak as a material, as shown by a specific gravity value of 2.18.Ultimately, in the petrified wood found in the Çaml?dere-Çeltikçi-Güdül region of Ankara province in Turkey, it is revealed that samples 1, 2, and 3 represent flint and chalcedony quartz mineral species, samples 4 and 5 represent chalcedony and opal quartz mineral species.  相似文献   

6.
The number of sinkholes (locally known as obruks) has increased rapidly in recent years near Karap?nar, located in the semi-arid Konya Closed Basin in Central Anatolia. Nineteen sinkholes have formed in the last 33 years (1977–2009) as a result of the collapse of cavity roofs in the Neogene lacustrine limestone in the Obruk Plateau and beneath Quaternary lake sediments in the Karap?nar-Hotam?? Plain. Of these, 13 have formed within the past 4 years (2006–2009). The Obruk Plateau takes its name from the presence of several hundred paleo-sinkholes which formed as a result of natural processes during the Quaternary period. More recently, human activity has induced the formation of new sinkholes, which presents a hazard to life and property. Changing agricultural patterns have led to the opening of thousands of deep wells in recent years, and increased water pumping currently exceeds the sustainable yield of the aquifer. Thus the formation of sinkholes has been triggered by a combination of natural and human causes. The groundwater level has dropped almost 24 m in the vicinity of Karap?nar during the last 26 years (1983–2008). Approximately 8 m of this drop occurred within the 4 years prior to the study (2005–2008). Legally-binding precautions must be taken to prevent further water table decline, in order to decrease sinkhole formation within the basin in the years to come.  相似文献   

7.
The Çalda? nickel laterite deposit located in the Aegean region of W. Turkey contains a reserve of 33 million tons of Ni ore with an average grade of 1.14% Ni. The deposit is developed on an ophiolitic serpentinite body which was obducted onto Triassic dolomites in the Late Cretaceous. The deposit weathering profile is both laterally and vertically variable. A limonite zone, which is the main ore horizon, is located at the base of the profile. A hematite horizon is located above the limonite, which in the south of the deposit is capped by Eocene freshwater limestones and in the north by a siliceous horizon. The deposit is unusual in lacking a significant saprolite zone with little development of Ni-silicates. The boundary between the limonite zone and serpentinite below is sharp with a marked decrease in concentrations of MgO from 13 to 1 wt.% over a distance of 2 mm representing the ‘Mg discontinuity’. Ni concentrations within goethite, the main ore mineral, reach a maximum of ~3 wt.% near the base of the limonite zone. Silica concentrations are high throughout most of the laterite with up to 80 wt.% silica in the upper portion of some profiles. The combination of a serpentinite protolith and a high water table at Çalda?, in association with an aggressive weathering environment in a tropical climate, resulted in the formation of an oxide-dominated deposit. The precipitation of silica may coincide with a change in climate with silica precipitation linked to an increase in seasonality. Additional variations within profile morphology are attributed to transportation during and after laterite development as a result of faulting, pocket type laterite formation and slumping, each of which produces a contrasting set of textural and geochemical features.  相似文献   

8.
The concentrations and distribution of natural and artificial radionuclides in sediment and water samples collected from Fırtına River in the Eastern Black Sea region of Turkey were investigated with an aim of evaluating the environmental radioactivity and radiation hazard. Natural gross α and gross β activities were determined for 21 different water samples, and the activity concentrations were obtained for 226Ra, 214Pb, 214Bi, 228Ac, 208Tl, 40K and 137Cs in 20 different sediment samples. The obtained results showed that natural gross α and gross β activity concentrations in water samples range from 12.4 ± 3.4 to 66.2 ± 9.2 mBq l−1 and from 27.9 ± 3.3 to 133.3 ± 4.1 mBq l−1, respectively. The mean activity concentrations were 32.6 ± 3.8 mBq l−1 for gross α and 69.9 ± 4.4 mBq l−1 for gross β. Generally, the gross β activities were higher than the corresponding gross α activities. The average concentrations of 238U and 232Th daughter products vary from 11 to 167 Bq kg−1 and from 16 to 107 Bq kg−1, respectively. The concentrations of 40K and 137Cs vary from 51 to 1,605 Bq kg−1 and from 0.8 to 42 Bq kg−1, respectively. Sediment characterization was also investigated using grain size, thin section and XRD analysis.  相似文献   

9.
 The aim of the study is to investigate the interaction between waters of Lake Girdev and groundwater in the allochthonous limestone units exposed in the area between Lake Girdev and Kazanpınarı Spring, southwestern Turkey. The features analyzed include the flow direction and apparent groundwater velocity, their relationship with Lake Girdev, and the effect of lithological and structural features on the groundwater circulation. The results of a fluorescein tracer test indicate that groundwater flows east-northeast and the apparent flow velocity ranges from 26.2 to 35.6 m h–1 between the injection site and various observation points. Tritium data suggest that the water of Lake Girdev and groundwater are probably similar in age, and oxygen-18 isotope data indicate that water derived from Lake Girdev is the main source of recharge to the aquifer. The aquifer is fed not only by Lake Girdev but also by rainfall percolating through allochthonous limestones; together, these provide the discharge of springs in Elmalı Polje. The permeability of the allochthonous limestone aquifer has been enhanced as a result of jointing and faulting. Received, June 1997 / Revised, June 1998, March 1999 / Accepted, July 1999  相似文献   

10.
11.
The purpose of this study is to determine the hydrological properties, groundwater potential, and water quality of the Çürüksu basin, western Turkey, and to contribute to the efforts of providing an adequate water supply for the city of Denizli. To achieve these objectives, the study consisted of mapping the geology and hydrogeology, determining the water balance, and defining the water quality. The basement rock units in the study area include several impervious metamorphic rock types and Mesozoic karstic limestone, which are overlain by Oligocene fluvial and lacustrine strata, Pliocene travertine and limestone, and Quaternary alluvium. The karstic limestone and the travertine and limestone strata constitute potential aquifers in the Çürüksu basin. The discharge regimes of the 22 springs in the two basins show little change through the year. The flow systems of the springs also have a large storage capacity and drainage occurs very slowly. The discharge of the springs does not appear to be affected immediately by monthly variations in precipitation. According to the water balance, the precipitation in the Çürüksu basin cannot provide all of the measured surface runoff. Excess runoff is 2?m3?s–1 in the Çürüksu basin, and in the adjacent Gökp?nar basin the deficit in surface runoff is also 2?m3?s–1. Thus, the underground catchment area of the springs extends beyond the surface drainage area of the Çürüksu basin. Although the P?narba??, Kazanp?nar, and Böceli springs emerge from the karstic limestone aquifer in the Çürüksu basin, these springs are fed from the adjacent Gökp?nar basin. The spring waters emerging from karstic limestone are fresh, of the calcium bicarbonate type, soft, and potable. The spring waters emerging from the travertine and limestone aquifer are low-temperature, brackish, of the calcium sulfate type, very hard, and not potable but useful for the irrigation. The occurrences of coal strata and hydrothermal activity have caused some deterioration of groundwater quality.  相似文献   

12.
Water pollution is a widespread problem in different areas of the world. Some of these problems originated from point contamination sources and widespread contaminant outlet sources which are observed in every country. The major elements and chemical loads of surface water have been dominated by constituents derived directly or indirectly from human activities and/or industrial practices that have increased additives in the last several decades. The point sources of contamination may result from the direct wastewater discharges to the dam sites, which are considered to be the most commonly encountered water pollution problems. One of these problems is the eutrophication process which usually occurs in the static water mass of lakes and other surface water reservoirs. This process may be caused by the continuous increase of nitrogen and phosphorus contents and decrease of O2 level in water causing an anaerobic condition which may stimulate algae-growth flow in these water bodies, consequently reducing the quality of water. Of course, there are many research methods for determining the various kinds of water pollution. In this research, the hydrochemical parameters were evaluated to estimate the types of pollution sources, the level of pollution, and its environmental impacts on the Tahtal dam reservoir.  相似文献   

13.
Hydrochemical analysis results suggest four different water types: bicarbonate dominant water (facies-I), sulfate dominant cold brine water (facies-II), sodium-bicarbonate dominant thermal water and thermal and mineralized water (facies-III), and sulfate–chloride dominant thermal and mineralized water (facies-IV). The mineral content/salinity of the water is related to the ions that these waters dissolve from the minerals on the rocks during infiltration and circulation in the saturated zone. Gypsum cover units that exist on the granitoids in the region is the main factor for the ion increase in the facies III geothermal water similar to the cold brine water (facies II). Isotopic analyses indicate that the thermal springs (Dutlu bath spring, Aya? bath well, Çoban bath well and Kapullu bath spring) are of meteoric origin and receive recharge from precipitation in the Beypazar? granitoids and around gypseous formations with elevations of about 950–1,150 m. Karakaya bath well and Il?ca bath spring thermal water points are recharged from the Bilecik limestone hills, Tekke volcanics and ?ncedoruk Formations. Karakoca mineral spring of thermal and mineralized water is recharged from out of the study area. According to oxygen-18 (SO42?) and sulfur-34 (SO42?) contents, sulfate in water samples from Aya? and Dutlu resorts as well as Çoban bath is derived from the gypsum of Kirmir Formation as the primary source. Sulfates of the Kapullu bath water and Karakoca mineral water originate from secondary sources such as pyrite oxidation and bacteriological reduction.  相似文献   

14.
Lake Seyfe is located in a closed basin near K?r?ehir in the central Anatolian region, Turkey. The aim of this study is to evaluate the groundwater quality and effects of lithogenic contamination carried out in the Lake Seyfe basin, which is represented by various lithologies and groundwater types. Seyfe, Horla and Akp?nar springs are recharged through marbles at the western and southwestern of the basin are ultimately and discharged into the K?z?l?rmak Formation and Lake Seyfe. The waters of deep wells drilled into the marbles are of bicarbonate type (type I) in the Ca2+–Mg2+–HCO3 ? and Ca2+–HCO3 ? facies. Özlühüyük spring and waters from most of trenches and shallow wells, which are fed by the K?z?l?rmak Formation, have a mixed (type II) composition in the Ca2+–Mg2+–HCO3 ?–Cl? facies. Groundwater in the alluvium and K?z?l?rmak Formation along Lake Seyfe has a salty (type III) character in the Na+–Cl? facies. The main reasons of formation and change of the groundwater salinity and hydrochemical facies in the Seyfe basin are causing the various (a) lithogenic pollution and heterogeneity of the K?z?l?rmak Formation, (b) salinity of the upper soil zones, and (c) evaporation of the trench and channel waters open to the atmosphere. Considering parameters such as sodium hazard, specific conductivity, bicarbonate and carbonate hazards, waters in the study area are generally suitable for agricultural usage.  相似文献   

15.
16.
A study of the hydrochemical evaluation of waters in the I??kl? Lake and surrounding area was carried out with the objective of identifying the geochemical processes and their relation with water quality in the region. The multivariate statistical techniques were used in the hydrochemical evaluation of waters. Statistical analysis of water quality parameters was made to seeing the interrelationship between different variables in order to explain the water quality and pollution status of study area. For this purpose, water samples were taken from lake, river, stream, and springs which are represented by investigated area and water qualities were evaluated. Generally, Ca2+, Mg2+, and Cl?, HCO3 ? ions are dominant within surface water and water sources. Arsenic concentration increase is determined in I??kl? spring and Kufi stream water samples. Also, aluminum concentration is high level in the Kufi stream water samples. This increase was related to igneous rocks as geogenic origin. Also, geogenic contamination was identified in R-mode factor and cluster analyses. There is high correlation between electrical conductivity and major ions of waters.  相似文献   

17.
Lithology and Mineral Resources - In the vicinity of Yücepinar Village of Zile district of Tokat province, there are silicified wood formations in agglomerate levels in the Çekerek...  相似文献   

18.
Two epithermal gold deposits (Kartaldağ and Madendağ) located in NW Turkey have been characterized through the detailed examinations involving geologic, mineralogical, fluid inclusion, stable isotope, whole-rock geochemistry, and geochronology data.The Kartaldağ deposit (0.01–17.65 ppm Au), hosted by Eocene dacite porphyry, is associated with four main alteration types with characteristic assemblage of: i) chlorite/smectite–illite ± kaolinite, ii) quartz–kaolinite, iii) quartz–alunite–pyrophyllite, iv) quartz–pyrite, the last being characterized by three distinct quartz generations comprising massive/vuggy (early), fine–medium grained, vug-lining (early), and banded, colloform, comb (late) textures. Observed sulfide minerals are pyrite, covellite, and sphalerite. Oxygen and sulfur isotope analyses, performed on quartz (δ18O(quartz): 7.93 to 8.95‰ and calculated δ18O(H2O): − 7.95 to 1.49‰) and pyrite (δ34S(pyrite): − 4.8‰ and calculated δ34S(H2S): − 6.08 to − 7.20‰) separates, suggest a meteoric water source for water in the hydrothermal fluid, and an igneous source for the sulfur dissolved in ore-related fluids. Microthermometric analyses of primary fluid inclusion assemblages performed on quartz (late quartz generation) yield temperatures (Th) dominantly in the range of 245–285 °C, and generally low salinity values at 0 to 1.7 wt.% NaCl eq. Based on the quartz textures and the associated base metal concentrations, along with fluid inclusion petrography, the early vug-lining quartz is considered to have been associated with the mineralization possibly through a boiling and a late mixing process at > 285 °C.The Madendağ deposit (0.27–20.60 ppm Au), hosted by Paleozoic mica schists, is associated with two main alteration types: sericite–illite–kaolinite, and quartz–pyrite dominated by two distinct quartz generations i) early colloform, comb and banded quartz and ii) late quartz, forming the cement in hydrothermal breccia. Whereas oxygen isotope analyses of quartz (δ18O(quartz): 9.55 to 18.19‰ and calculated δ18O(H2O): − 2.97 to 5.54‰) suggest varying proportions of meteoric and magmatic sources for the ore bearing fluid, sulfur isotope ratios (δ34S(pyrite): − 2.2‰ and calculated δ34S(H2S): (− 3.63) to (− 3.75) ‰) point to an essentially magmatic source for sulfur with or without contribution from sedimentary sources. Microthermometric analysis carried out on primary fluid inclusion populations of a brecciated sample (early quartz), give a temperature (Th) range of 235–255 °C and 0.0 to 0.7 wt.% NaCl eq. salinity. Based on the textural relationship, base metal and high gold contents, the ore precipitation stage is associated with late stage quartz formation via a possible boiling process.The presence of alunite, pyrophyllite and kaolinite, vuggy quartz and covellite suggest a high-sulfidation type of epithermal deposit for Kartaldağ. On the other hand, Madendağ is identified as an adularia-sericite type owing to the presence of significant sericite, neutral pH clays (mostly illite, chlorite/smectite, and kaolinite), low temperature quartz textures (e.g., colloform, comb, and banded quartz), and limited sulfide minerals.Given the geographical proximity of Kartaldağ and Madendağ deposits, the similar temperature and salinity ranges obtained from their fluid inclusions, and the similar ages of igneous rocks in both deposits (Kartaldağ: 40.80 ± 0.36 to 42.19 ± 0.45 Ma, Madendağ: 43.34 ± 0.85 Ma) the mineralizing systems in both deposits are considered to be genetically related.  相似文献   

19.
The Beypazar? granitoid has been studied with respect to multi-radiometric dating and oxygen isotopic geothermometry. Radiometric dating of the granitoid yields zircon U-Pb isochron ages ranging from 72.5 ± 12.6 to 78.6 ± 4.7, and K-Ar ages of 71.4 ± 2.8 to 74.9 ± 2.9 and 59.5 ± 2.2 to 75.4 ± 2.9 Ma for hornblende and biotite, respectively. Oxygen isotope thermometry for the granitoid gives temperatures of 550 ± 25°C to 605 ± 30, 390 ± 15 to 540 ± 25°C, and 481 ± 5 to 675 ± 10°C, for hornblende, biotite, and K-feldspar, respectively, when paired with quartz. The systematic differences among ages according to different techniques used on different minerals are used to reconstruct the cooling history of the granite. The results yield rapid cooling rates of 33.3°C/Ma from 800°C to 550°C, and slow cooling rates of about 15 ± 0.5°C/Ma from 550 to 300°C. Rapid subsolidus cooling between 600°C and 550°C is documented by 40Ar/39Ar ages on amphibole and biotite between 71.4 ± 2.8 and 75.4 ± 2.9 Ma. Younger ages on biotites from two samples (59.5 ± 2.2 and 64.4 ± 2.5) are probably caused by loss of Ar. The reason for this possible Ar loss can be interpreted as slower subsolidus cooling (~375°C) ages. There is an apparent spatial and temporal relationship between the intrusion-cooling of the Beypazar? granitoid and the evolution of the ?zmir–Ankara–Erzincan ocean belonging to the northern Neo-Tethyan ocean domain.  相似文献   

20.
This study defines the source area, sub-aerial weathering, and sedimentary cycle level, as well as heavy metal content and origin, of the Çoruh River bed sediments. The studied sediments are geochemically classified as litharenite based on the ratio of the major element contents. Relative to the Upper Continental Crust (UCC), trace elements Rb, Sr, Ba, Th, U, Zr, Hf, Y, Nb, and Pb are generally depleted; Co, Ni, Cu, Sc, and V are generally enriched; and Au is depleted in some places and enriched in other places. The rare earth element (REE) distributions of the samples exhibit a trend similar to that of the upper continental crust (UCC); however, low to moderate depletion occurs in the bed sediments in UCC. The analyzed samples exhibit low Chemical Index of Alteration (CIA) values, Plagioclase Index of Alteration (PIA) values (<50), CIA/WIP (Weathering Index ratios <1), and substantially high Index of Compositional Variability values (ICV) (>1). Thus, the samples are not chemically mature and are mainly derived from non-altered sources and were exposed the simple cycling history. REEs are depleted in the river bed sediments, unlike the world river average silt, world river average clay, and suspended sediment in world rivers. Minor enrichment of Zn, Sn, and Sc contents, low-to-moderate enrichment of Cu content, very severe enrichment of as content, and extremely severe enrichment of Ni content of the analyzed samples are observed. Consequently, stream bed sediments are derived from intermediate sources close to mid-continental crust rather than felsic sources Low-to-moderate degrees of chemical weathering of these sediments indicate increased tectonic activity, increased erosion, and rapid sedimentation in semiarid to arid conditions in the source regions over time. Thus, the sediments are chemically immature. These sediments are exposed to lithogenic and anthropogenic contamination.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号