近似常Q模型的黏声各向异性纯qP波逆时偏移

地下介质中普遍存在各向异性及黏滞性, 各向异性会使地震波走时发生变化, 黏滞性会使地震波发生振幅衰减和相位畸变.在进行地震资料偏移成像时, 忽略介质各向异性及黏滞性的影响会导致绕射波不收敛、构造位置不准确, 能量不均衡, 偏移剖面频带变窄等问题, 大幅降低偏移剖面质量.本文基于TI介质纯qP波动方程, 结合常Q模型的松弛函数, 推导出新的黏声各向异性纯qP波动方程.在该方程中, 振幅衰减项与相位频散项是解耦的, 因此利用该方程进行成像时, 可通过改变振幅衰减项的符号进行衰减补偿.多个数值算例结果表明文中所提出的方程可以正确描述地震波在各向异性衰减介质中的传播特征, 应用本文方程进行成像时能够有效校正各向异性及黏滞性对偏移剖面的影响, 提高成像剖面的分辨率及精度.

     

基于GSLS模型TI介质衰减拟声波方程

随着计算机硬件技术的发展以及高分辨率勘探需求的增加,我们希望能够更准确地模拟地下介质,得到更丰富的地层信息.然而,传统的声学假设并不能描述实际地层所存在各向异性和黏滞性,使得成像分辨率较低.为了实现深部储层的高精度成像,本文同时考虑了介质的各向异性和黏滞性,从TI介质弹性波的基本理论出发,结合各向异性GSLS理论,并通过声学近似方法导出基于GSLS模型的各向异性衰减拟声波方程.数值模拟表明该方程既能准确地描述各向异性介质下的准P波运动学规律,又能体现地层的吸收衰减效应;模型逆时偏移结果表明,在实现成像过程中考虑各向异性和黏滞性的影响,能对高陡构造清晰成像,且剖面振幅相对均衡,分辨率较高.     

Viscoacoustic prestack reverse time migration based on the optimal time-space domain high-order finite-difference method

Prestack reverse time migration （RTM） is an accurate imaging method ofsubsurface media. The viscoacoustic prestack RTM is of practical significance because itconsiders the viscosity of the subsurface media. One of the steps of RTM is solving thewave equation and extrapolating the wave field forward and backward; therefore, solvingaccurately and efficiently the wave equation affects the imaging results and the efficiencyof RTM. In this study, we use the optimal time-space domain dispersion high-order finite-difference （FD） method to solve the viscoacoustic wave equation. Dispersion analysis andnumerical simulations show that the optimal time-space domain FD method is more accurateand suppresses the numerical dispersion. We use hybrid absorbing boundary conditions tohandle the boundary reflection. We also use source-normalized cross-correlation imagingconditions for migration and apply Laplace filtering to remove the low-frequency noise.Numerical modeling suggests that the viscoacoustic wave equation RTM has higher imagingresolution than the acoustic wave equation RTM when the viscosity of the subsurface isconsidered. In addition, for the wave field extrapolation, we use the adaptive variable-lengthFD operator to calculate the spatial derivatives and improve the computational efficiencywithout compromising the accuracy of the numerical solution.     

Modeling and RTM for arbitrary-order pure acoustic wave equation in VTI media using normalized pseudo-analytical method

The conventional pseudo-acoustic wave equations(PWEs) in vertical transversely isotropic(VTI)media may generate SV-wave artifacts and propagation instabilities when anisotropy parameters cannot satisfy the pseudo-acoustic assumption. One solution to these issues is to use pure acoustic anisotropic wave equations, which can produce stable and pure P-wave responses without any SVwave pollutions. The commonly used pure acoustic wave equations(PAWEs) in VTI media are mainly derived from the decoupled P-SV dispersion relation based on first-order Taylor-series expansion(TE), thus they will suffer from accuracy loss in strongly anisotropic media. In this paper, we adopt arbitrary-order TE to expand the square root term in Alkhalifah's accurate acoustic VTI dispersion relation and solve the corresponding PAWE using the normalized pseudoanalytical method(NPAM) based on optimized pseudodifferential operator. Our analysis of phase velocity errors indicates that the accuracy of our new expression is perfectly acceptable for majority anisotropy parameters. The effectiveness of our proposed scheme also can be demonstrated by several numerical examples and reverse-time migration(RTM) result.     

一种基于正则化策略的稳定衰减补偿逆时偏移

地下介质通常具有黏滞性,地震波在地下介质的传播过程中将不可避免地伴随着振幅衰减和速度频散,进而影响地震成像的准确性和分辨率.基于黏滞介质的衰减补偿逆时偏移能沿地震波的传播路径恢复其所经历的振幅衰减和相位畸变,有效提升成像效果.然而,由于地层对地震波的吸收衰减效应呈指数变化,衰减补偿过程中高低频分量的非同步增长易导致补偿算法数值不稳定.为此,本文提出了一种基于正则化策略的稳定衰减补偿逆时偏移方法.该方法基于解耦的常Q分数阶拉普拉斯算子黏滞声波方程描述地震波在地下介质中的传播效应,将振幅正则化因子引入该方程的时间-波数域的解析解中,以确保在补偿过程中地震波场能稳定延拓.二维、三维合成数据以及实际资料的偏移算例均证实了该方法的可行性和有效性,所提出的方法能有效地处理衰减补偿中的不稳定问题,明显提升地震资料的偏移成像质量.

     

黏弹性VTI介质微地震数据目标导向裂缝染色逆时偏移

水力压裂技术能够改善储层中裂缝的连通性,实现致密储层油气增产,利用压裂过程中产生的微地震事件进行裂缝偏移成像有助于评价水力压裂效果.水力压裂通常在具有黏弹性和各向异性的页岩油气储层中进行,地震波传播过程中会发生具有方向性的衰减,此外微地震震源及检波器通常分布在有限区域内,导致偏移剖面上存在远场照明较差和成像干扰的问题,难以有效进行裂缝描述.本文提出了一种黏弹性VTI介质目标导向逆时偏移裂缝成像方法,首先推导了黏弹性VTI介质染色波动方程并提出了多组偏移剖面互相关染色成像条件,然后通过裂缝逆时偏移成像测试分析了微地震数据信噪比、介质参数和事件定位精度对偏移结果的影响,最后结合地震干涉法减轻了定位误差造成的干扰.数值模拟实验表明,目标导向的染色逆时偏移成像算法能够有效压制成像剖面中的伪影干扰,改善目标区域照明,提高裂缝成像的空间分辨率.

     

带正则化校正的TTI介质qP波方程及其逆时偏移方法和应用

各向异性研究对地下介质精确成像有着重要的意义,在当前计算机硬件迅速发展及宽方位地震数据采集日益普遍的情况下,成像必须考虑介质的各向异性.逆时偏移是基于双程波动方程的较为精确的数值解的成像方法,所以相对于其他地震成像方法,它具有很大的优势,譬如不受反射界面的倾角限制、偏移速度结构合适时能够使回转波及多次波正确成像.在各向同性介质中,可使用标量波方程来模拟波场.而在各向异性介质中,P波和SV波是相互耦合的,即不存在单纯的标量波传播,通常利用能代表耦合波场中P波分量运动学特征的拟声波(qP波)进行偏移成像.本文中,我们推导出了TTI介质下qP波控制方程.该方程可采用显式有限差分格式进行求解.通过声学近似,若沿对称轴方向的剪切波速度为零,对于对称轴方向不变且ε≥δ的模型来说,可得到稳定的数值解.但对于TTI介质来说,由于沿对称轴方向各向异性参数是变化的,声学近似会引起波场传播及数值计算的不稳定.因此,我们提出了正则化有限横波的方法,很好地解决了这一问题.最后,给出了Foothill模型的测试结果及某探区实际资料试算结果,展示了采用这个方程进行复杂TTI模型正演和高质量逆时偏移成像结果,证实了该方法的正确性和实际资料应用中的有效性.     

Acoustic VTI modeling and pre-stack reverse-time migration based on the time–space domain staggered-grid finite-difference method

Reverse-time migration (RTM) is based on seismic numerical modeling algorithms, and the accuracy and efficiency of RTM strongly depend on the algorithm used for numerical solution of wave equations. Finite-difference (FD) methods have been widely used to solve the wave equation in seismic numerical modeling and RTM. In this paper, we derive a series of time–space domain staggered-grid FD coefficients for acoustic vertical transversely isotropic (VTI) equations, and adopt these difference coefficients to solve the equations, then analyze the numerical dispersion and stability, and compare the time–space domain staggered-grid FD method with the conventional method. The numerical analysis results demonstrate that the time–space domain staggered-grid FD method has greater accuracy and better stability than the conventional method under the same discretizations. Moreover, we implement the pre-stack acoustic VTI RTM by the conventional and time–space domain high-order staggered-grid FD methods, respectively. The migration results reveal that the time–space domain staggered-grid FD method can provide clearer and more accurate image with little influence on computational efficiency, and the new FD method can adopt a larger time step to reduce the computation time and preserve the imaging accuracy as well in RTM. Meanwhile, when considering the anisotropy in RTM for the VTI model, the imaging quality of the acoustic VTI RTM is better than that of the acoustic isotropic RTM.     

VTI介质纯P波混合法正演模拟及稳定性分析

各向异性介质纯P波方程完全不受横波的干扰,在一定程度上可以减缓由于介质各向异性引起的数值不稳定,本文推导了具有垂直对称轴的横向各向同性(VTI)介质纯P波一阶速度-应力方程.由于纯P波方程存在一个分数形式的伪微分算子,无法直接采用有限差分法求解.针对该问题,本文采用伪谱法和高阶有限差分法联合求解波动方程,重点分析了混合法求解纯P波一阶速度-应力方程的稳定性问题,并给出了混合法求解纯P波方程的稳定性条件.数值模拟结果表明纯P波方程伪谱法和高阶有限差分混合法能够进行复杂介质的正演模拟,在强变速度、变密度的地球介质中仍然具有较好的稳定性.     

基于平面波加速的VTI介质最小二乘逆时偏移

地震各向异性集中表现为速度各向异性,势必影响地震波运动学特征.传统声波逆时偏移(RTM)和最小二乘逆时偏移(LSRTM)没有考虑介质各向异性特征,导致反射波不能正确归位、同相轴出现扭曲及寻优速度慢或不收敛等,VTI介质逆时偏移(VTI-RTM)矫正了声波成像的不足,但仍存在低频干扰严重、中深部成像不佳、振幅保持差等缺陷.为此,本文首先实现了VTI介质最小二乘逆时偏移(VTI-LSRTM)方法,为了节省I/O及内存需求并提高效率,进一步引入平面波编码技术,提出了一种基于平面波加速的VTI介质最小二乘逆时偏移(VTI-PLSRTM)策略.在此基础上开展了简单模型及复杂Marmousi模型成像试验,并与标准逆时偏移剖面对比表明:本方法能够校正各向异性造成的相位畸变,且在迭代中自动压制串扰及低频噪声、补偿中深部能量,是一种兼具质量与效率的保幅成像策略;对速度误差的敏感性测试说明该方法需要相对正确的偏移速度及Thomsen参数模型.     

VTI介质P波非双曲时差分析

具有垂直对称轴的横向各向同性介质模型(VTI)是目前各向异性理论研究和多波多分量地震资料叠前成像处理中最常用的一种各向异性模型.VTI介质中反射 P波时距曲线一般不再是双曲线.基于不同的相速度近似公式会得到不同的时距关系式.文中对几种典型的非双曲时距曲线与射线追踪得到的准确时距曲线在不同各向异性强度下进行了对比，结果表明Muir等和Stovas等提出的非双曲时距公式由于过高地考虑了横波垂直速度的影响与精确的时距曲线有很大偏差；Tsvankin等提出的弱各向异性非双曲时距公式在ε-δ<0时误差增大；Alkhalifah等提出的非双曲时距公式在大炮检距任意各向异性强度下都具有较高的精度，适于在实际资料处理中应用.     

TI介质局部角度域射线追踪与叠前深度偏移成像

研究与实践表明,对于长偏移距、宽方位地震数据,忽略各向异性会明显降低成像质量,影响储层预测与描述的精度.针对典型的横向各向同性(TI)介质,本文面向深度域构造成像与偏移速度分析的需要,研究基于射线理论的局部角度域叠前深度偏移成像方法.它除了像传统Kirchhoff叠前深度偏移那样输出成像剖面和炮检距域的共成像点道集,还遵循地震波在成像点处的局部方向特征、基于扩展的脉冲响应叠加原理获得入射角度域和照明角度域的成像结果.为了方便快捷地实现TI介质射线走时与局部角度信息的计算,文中讨论和对比了两种改进的射线追踪方法:一种采用从经典各向异性介质射线方程演变而来的由相速度表征的简便形式;另一种采用由对称轴垂直的TI(即VTI)介质声学近似qP波波动方程推导出来的射线方程.文中通过坐标旋转将其扩展到了对称轴倾斜的TI(即TTI)介质.国际上通用的理论模型合成数据偏移试验表明,本文方法既适用于复杂构造成像,又可为TI介质深度域偏移速度分析与模型建立提供高效的偏移引擎.     

Separation of diffracted waves in transversely isotropic media

Imaging diffracted waves can provide useful information about complex subsurface geology and fracture networks. Separation of diffractions from typically more intensive reflected events can be done based on specularity, which measures deviation from Snell’s law. Here, we analyze two formulations of specularity and their applicability to diffraction processing in the presence of anisotropy. We show that the most common definition of specularity, originally introduced for pure modes in isotropic media, remains valid for both pure and converted waves in arbitrarily anisotropic models. The other formulation operates directly with the difference between the slowness projections onto the reflector for the incident and reflected waves. Testing on a VTI (transversely isotropic with a vertical symmetry axis) diffraction ramp model demonstrates that both formulations produce satisfactory results for anisotropic media with appropriate tapering of the specularity gathers. Then separation and imaging of diffractions is performed for the structurally complex VTI Marmousi model. We also analyze the sensitivity of diffractions in the specularity gathers to errors in the symmetry-direction velocity and anellipticity parameter η.     

忽略TTI介质对称轴倾角的可行性

假设横向各向同性(TI)介质的对称轴是垂直的(VTI)或者水平的(HTI)能给实际资料处理带来便利,然而实际TI介质的对称轴往往是倾斜的(TTI),忽略对称轴倾角可能给各向异性参数提取和成像带来偏差,因此需要研究是否能、以及什么条件下能忽略TTI介质对称轴倾角.本文通过理论研究和数值分析研究了与TTI介质弹性性质最接近的VTI介质(OAVTI)的弹性常数和各向异性参数与原TTI介质的弹性常数和各向异性参数之间的联系与差别.结果表明:OAVTI介质各向异性参数与原TTI介质各向异性参数之间的差别可统一表示成F(α0/β0,ε,δ,γ)ξ2的形式,其中F(α0/β0,ε,δ,γ)是无量纲各向异性参数(ε, δ, γ)的线性函数,ξ是对称轴倾角;ξ的大小对各参数的误差起主导作用,一般不建议忽略20°~25°以上的对称轴倾角;当ξ较小时,即使是对强各向异性的TTI介质作VTI近似,引起的P波各向异性参数误差也很小,因此在纵波资料处理中忽略TTI介质对称轴倾角通常是可行的;即使在小ξ条件下,倾斜对称轴对SV波也有显著影响,因此在转换波资料处理中,不建议忽略TTI介质的对称轴倾角.本文的研究为分析忽略TTI介质对称轴倾角的可行性提供了理论依据和简便的判据.     

Traveltime computation with the linearized eikonal equation for anisotropic media

A linearized eikonal equation is developed for transversely isotropic (TI) media with a vertical symmetry axis (VTI). It is linear with respect to perturbations in the horizontal velocity or the anisotropy parameter η. An iterative linearization of the eikonal equation is used as the basis for an algorithm of finite-difference traveltime computations. A practical implementation of this iterative technique is to start with a background model that consists of an elliptically anisotropic, inhomogeneous medium, since traveltimes for this type of medium can be calculated efficiently using eikonal solvers, such as the fast marching method. This constrains the perturbation to changes in the anisotropy parameter η (the parameter most responsible for imaging improvements in anisotropic media). The iterative implementation includes repetitive calculation of η from traveltimes, which is then used to evaluate the perturbation needed for the next round of traveltime calculations using the linearized eikonal equation. Unlike isotropic media, interpolation is needed to estimate η in areas where the traveltime field is independent of η, such as areas where the wave propagates vertically.
Typically, two to three iterations can give sufficient accuracy in traveltimes for imaging applications. The cost of each iteration is slightly less than the cost of a typical eikonal solver. However, this method will ultimately provide traveltime solutions for VTI media. The main limitation of the method is that some smoothness of the medium is required for the iterative implementation to work, especially since we evaluate derivatives of the traveltime field as part of the iterative approach. If a single perturbation is sufficient for the traveltime calculation, which may be the case for weak anisotropy, no smoothness of the medium is necessary. Numerical tests demonstrate the robustness and efficiency of this approach.     

横向各向同性介质拟声波方程及其在逆时偏移中的应用

地下岩石的速度各向异性影响地震波的传播与成像.横向各向同性(TI)介质为最普遍的等效各向异性模型.引入TI介质拟声波方程可以避免复杂的弹性波方程求解以及各向异性介质波场分离,以满足对纵波成像的实际需要.本文从垂直横向各向同性(VTI)介质弹性波方程出发,推导出正应力表达的拟声波方程以及相应的纵波分量的表达式,进而分析从频散关系得到的拟声波方程的物理意义,而后将拟声波方程扩展到更一般的倾斜横向各向同性(TTI)介质中.波前快照与群速度平面的对比验证了拟声波方程可以很好地近似描述qP波的运动学特征.在此基础上,将拟声波方程应用在逆时偏移中并与其特例声波近似方程进行对比,讨论了计算效率、稳定性等实际问题.数值试验表明VTI介质情况下采用声波近似方程可以提高计算效率,而TTI介质qP-qSV波方程则在效率相当的情况下可以保证稳定性.SEG/HESS模型和逆冲模型逆时偏移试验验证了本文TI介质拟声波方程的实用性.     

Angle gathers in wave‐equation imaging for transversely isotropic media

In recent years, wave‐equation imaged data are often presented in common‐image angle‐domain gathers as a decomposition in the scattering angle at the reflector, which provide a natural access to analysing migration velocities and amplitudes. In the case of anisotropic media, the importance of angle gathers is enhanced by the need to properly estimate multiple anisotropic parameters for a proper representation of the medium. We extract angle gathers for each downward‐continuation step from converting offset‐frequency planes into angle‐frequency planes simultaneously with applying the imaging condition in a transversely isotropic with a vertical symmetry axis (VTI) medium. The analytic equations, though cumbersome, are exact within the framework of the acoustic approximation. They are also easily programmable and show that angle gather mapping in the case of anisotropic media differs from its isotropic counterpart, with the difference depending mainly on the strength of anisotropy. Synthetic examples demonstrate the importance of including anisotropy in the angle gather generation as mapping of the energy is negatively altered otherwise. In the case of a titled axis of symmetry (TTI), the same VTI formulation is applicable but requires a rotation of the wavenumbers.     

Azimuth moveout correction for transversely isotropic media

The azimuth moveout (AMO) operator in homogeneous transversely isotropic media with a vertical symmetry axis (VTI), as in isotropic media, has an overall skewed saddle shape. However, the AMO operator in anisotropic media is complicated; it includes, among other things, triplications at low angles. Even in weaker anisotropies, with the anisotropy parameter η= 0.1 (10% anisotropy), the AMO operator is considerably different from the isotropic operator, although free of triplications. The structure of the operator in VTI media (positive η) is stretched (has a wider aperture) compared with operators in isotropic media, with the amount of stretch being dependent on the strength of anisotropy. If the medium is both vertically inhomogeneous, i.e. the vertical velocity is a function of depth (v(z)), and anisotropic, which is a common combination in practical problems, the shape of the operator again differs from that for isotropic media. However, the difference in the AMO operator between the homogeneous and the v(z) cases, even for anisotropic media, is small. Stated simply, anisotropy influences the shape and aperture of the AMO operator far more than vertical inhomogeneity does.     

Modelling of viscoacoustic wave propagation in transversely isotropic media using decoupled fractional Laplacians

A new wave equation is derived for modelling viscoacoustic wave propagation in transversely isotropic media under acoustic transverse isotropy approximation. The formulas expressed by fractional Laplacian operators can well model the constant-Q (i.e. frequency-independent quality factor) attenuation, anisotropic attenuation, decoupled amplitude loss and velocity dispersion behaviours. The proposed viscoacoustic anisotropic equation can keep consistent velocity and attenuation anisotropy effects with that of qP-wave in the constant-Q viscoelastic anisotropic theory. For numerical simulations, the staggered-grid pseudo-spectral method is implemented to solve the velocity–stress formulation of wave equation in the time domain. The constant fractional-order Laplacian approximation method is used to cope with spatial variable-order fractional Laplacians for efficient modelling in heterogeneous velocity and Q media. Simulation results for a homogeneous model show the decoupling of velocity dispersion and amplitude loss effects of the constant-Q equation, and illustrate the influence of anisotropic attenuation on seismic wavefields. The modelling example of a layered model illustrates the accuracy of the constant fractional-order Laplacian approximation method. Finally, the Hess vertical transversely isotropic model is used to validate the applicability of the formulation and algorithm for heterogeneous media.     

添加正则化项的黏声逆时偏移成像方法研究

在实际地球介质中传播的地震波会产生衰减和频散现象,因此其更接近于黏弹性介质,在地震处理中补偿这些黏性影响是十分必要的。基于波动方程的叠前深度偏移中进行吸收衰减补偿更准确,也更有物理意义,直接求解双程波动方程的逆时偏移(RTM)能够成像大倾角复杂构造,具有诸多优势。然而当考虑吸收衰减补偿时通常会产生不稳定现象,大部分研究都是在逆时偏移的波场延拓中进行波数域的低通滤波来解决这个问题。本文采用广义标准线性固体的黏声波动方程进行吸收衰减补偿的Q--RTM方法,通过添加正则化项的方式来稳定延拓过程。添加正则化项本质上是低通滤波,滤波窗口是指数形式,在时空域有明确的形式,可以阻止发生高频不稳定。与直接滤波相比,正则化参数可以是空变的,因此比较适合剧烈变化的区域,我们还发现震源归一化互相关成像条件更适合Q--RTM方法。