Clay mineralogy of a red clay–loess sequence from Lingtai, the Chinese Loess Plateau

The Chinese Loess Plateau (CLP) comprises an extensive record of eolian deposition that contains important information about climate change. The objective of this study is to investigate if mineralogy can provide more insight into the long-term evolution of the East Asian monsoon. Comparisons between mineralogy and other paleoclimatic records (grain size and magnetic susceptibility) from the CLP have been made to evaluate the efficacy of mineralogy as a paleoclimatic tool.Here we present data from a mineralogical study of a red clay–loess sequence at Lingtai, central Chinese Loess Plateau. Changes related to source area(s), transport processes and weathering regime over time are recorded in mineral variation.Higher average concentrations of kaolinite, chlorite and quartz in the red clay, together with abrupt changes in relative mineral abundances across the red clay–loess boundary suggest a change of source area at 2.6 Ma. From 2.6 Ma to about 1.7 Ma the summer monsoon influence increases, destroying chlorite and contributing fine illite particles to the sediment. At around 1.7 Ma the mineralogy becomes relatively constant, suggesting that the monsoon was fairly stable during this period. At 0.7–0.5 Ma an increase of both summer monsoon and winter monsoon activity is inferred from illite, kaolinite, chlorite and plagioclase concentrations. Over the last 0.5 Ma mineralogy suggests an aridification of source area(s) as chlorite and plagioclase concentrations increase where illite concentration decreases. The last major change occurred around 0.07 Ma and indicates reducing summer monsoon influence as chlorite and quartz concentrations increase and illite concentration, as well as the < 2 μm size fraction, decreases. The mineralogical trends and differences between loess and paleosols units suggest different source areas in the last 0.5 Ma.     

Preferential low-pH dissolution of pyroxene in plagioclase-pyroxene mixtures: Implications for martian surface materials

Acid weathering of plagioclase-pyroxene mixtures has been investigated with an open system kinetic dissolution model. The modeling reveals that elevated plagioclase/pyroxene ratios observed in some low-albedo martian regions and atmospheric dust could be partially caused by preferential dissolution of pyroxenes at pHs below ∼3-4. Surface materials with smaller grain sizes, affected by lower pH fluids, and/or exposed to longer durations of acid weathering would be enriched in plagioclase. If preferential dissolution is responsible for the observed mineral ratios, the dissolution process likely occurred on a large scale, such as weathering by acid atmospheric precipitates. If dissolution was continuous, modeled timeframes required to produce a high plagioclase/pyroxene ratio are short on geologic timescales; however, it is likely that acid weathering on Mars was episodic, possibly occurring over a longer period of time.     

Lunar Clinopyroxene and Plagioclase: Surface Distribution and Composition

The Clementine UVVIS images and the spectral and chemical (mineral) characteristics of lunar soil samples previously measured by the Lunar Samples Characterization Consortium were used to map the plagioclase and clinopyroxene abundance in the lunar surface material. An excess of plagioclase was found in young highland craters (e.g., in the crater Tycho) and in their ray systems. For clinopyroxenes, analogous behavior was observed in mare craters (e.g., in the crater Aristarchus). The maps for the FeO and Al₂O₃ bulk contents and the contents of these oxides in plagioclase and clinopyroxene were estimated by the same technique. These maps were compared to each other and to the predicted distribution of the lunar regolith maturity. The regolith of highland ray systems (e.g., the Tycho crater system) is characterized not only by low maturity but also by peculiar iron and aluminum contents: the lower the soil maturity degree, the smaller the iron content and the greater the aluminum content. This is confirmed by the data for the lunar soil samples from the Apollo 16 landing site. A cluster analysis of the “clinopyroxene content-maturity” and “plagioclase content-maturity” correlation diagrams allowed the mineral mapping of the lunar surface to be performed.__________Translated from Astronomicheskii Vestnik, Vol. 39, No. 4, 2005, pp. 291–303.Original Russian Text Copyright © 2005 by Shkuratov, Kaydash, Pieters.     

Salten Skov I: A Martian magnetic dust analogue

A fine grained magnetic iron oxide precipitate found in Denmark has been studied with regard to grain size, magnetic properties, aerosol transport, grain electrification, aggregation and optical reflectance. It has shown itself to be a good Martian dust analogue. The fraction of the Salten Skov I soil sample <63 μm was separated from the natural sample by dry sieving. This fraction could be dispersed by ultrasonic treatment into grains of diameter ～1 μm, in reasonable agreement with suspended dust grains in the Martian atmosphere estimated from the Viking, Pathfinder and Mars Exploration Rover missions. Though mineralogical and chemical differences exist between this analogue and Martian dust material, in wind tunnel experiments many of the physical properties of the atmospheric dust aerosol are reproduced.     

Interpretation of the underground muon charge ratio

The MINOS experiment has observed a rise in the underground muon charge ratio r_μ=μ⁺/μ^-. This ratio can be related to the atmospheric production ratios of π⁺/π^- and K⁺/K^-. Our analysis indicates that the relevant variable for studying the charge ratio is , rather than . We compare a simple energy dependent parameterization of the rise in the charge ratio with more detailed previously published Monte Carlo simulations and an analytical calculation. We also estimate the size of two previously neglected effects in this context: the charge sign dependency of the dE/dx in rock, and the energy dependence of heavy primaries on the derived K⁺/K^- ratio.     

Phytochemical changes in leaves of subtropical grasses and fynbos shrubs at elevated atmospheric CO2 concentrations

The effects of elevated atmospheric CO₂ concentrations on plant polyphenolic, tannin, nitrogen, phosphorus and total nonstructural carbohydrate concentrations were investigated in leaves of subtropical grass and fynbos shrub species. The hypothesis tested was that carbon-based secondary compounds would increase when carbon gain is in excess of growth requirements. This premise was tested in two ecosystems involving plants with different photosynthetic mechanisms and growth strategies. The first ecosystem comprised grasses from a C₄-dominated, subtropical grassland, where three plots were subjected to three different free air CO₂ enrichment treatments, i.e., elevated (600 to 800 μmol mol⁻¹), intermediate (400 μmol mol⁻¹) and ambient atmospheric CO₂. One of the seven grass species, Alloteropsis semialata, had a C₃ photosynthetic pathway while the other grasses were all C₄. The second ecosystem was simulated in a microcosm experiment where three fynbos species were grown in open-top chambers at ambient and 700 μmol mol⁻¹ atmospheric CO₂ in low nutrient acid sands typical of south western coastal and mountain fynbos ecosystems. Results showed that polyphenolics and tannins did not increase in the grass species under elevated CO₂ and only in Leucadendron laureolum among the fynbos species. Similarly, foliar nitrogen content of grasses was largely unaffected by elevated CO₂, and among the fynbos species, only L. laureolum and Leucadendron xanthoconus showed changes in foliar nitrogen content under elevated CO₂, but these were of different magnitude. The overall decrease in nitrogen and phosphorus and consequent increase in C:N and C:P ratio in both ecosystems, along with the increase in polyphenolics and tannins in L. laureolum in the fynbos ecosystem, may negatively affect forage quality and decomposition rates. It is concluded that fast growing grasses do not experience sink limitation and invest extra carbon into growth rather than polyphenolics and tannins and show small species-specific chemical changes at elevated atmospheric CO₂ concentrations. Responses of fynbos species are varied and were species-specific.     

Mineral aerosol properties observed in the northwest region of China

The aerosol optical depth and Ångström exponent for 2002–2003 were derived from CE_318 sun/sky photometer observations carried out at Tazhong, Hetian, Minqin and Dunhuang, located in the source regions of mineral aerosols in China. The observed aerosol properties, including their diurnal and monthly variations, are given for each of the observation sites. The effects of meteorological parameters, such as wind and relative humidity, on aerosol optical depth are analyzed.     

Evidence for enhanced hydration on the northern flank of Olympus Mons, Mars

In this paper we report about a small region on the northern scarp of Olympus Mons showing an increase of the 3 μm hydration band in the OMEGA spectra, together with low superficial temperatures. Although water ice clouds can occurs on the flank of big martian volcanoes, radiative transfer modeling indicates that atmospheric water ice alone cannot justify the shape of the observed band. A fit of the 1.9–3 μm absorption features is obtained by hypothesizing that the study region consists of a mixture of dust and water ice covered by an optically thin (τ=0.08 at 3 μm) layer of dust. Thermal modeling also suggests that water ice in this region may be stable during most of the martian year due to the saturation of the atmosphere. If water ice is responsible for the observed spectral behavior, it might consist of a number of ice or snow patches possibly deposited in small depressions.     

A numerical study of the contributions of dust source regions to the global dust budget

Contributions of the nine potential dust source regions (North and South Africa, the Arabian Peninsula, Central Asia, eastern and western China, North and South America, and Australia) to the global dust budget are investigated with a global dust transport model. A six-year simulation (1990 to 1995) indicates that the greatest contributor to the global dust budget is found to be North Africa (the Sahara Desert), which accounts for 58% of the total global dust emission and 62% of the total global dust load in the atmosphere. Australian dust dominates the southern hemisphere. The dust emission and atmospheric dust load originating from East Asia (eastern and western China) are estimated to be 214 Tg yr^− 1 and 1.1 Tg, respectively, which are 11% and 6% of the total global dust emission and dust load. Dust from East Asia dominates the atmospheric load over China and Mongolia (about 70%), Korea (60%), Japan (50%), and the North Pacific Ocean (40%). The contribution of dust originating from regions other than East Asia to the dust load over these East Asian countries and the North Pacific Ocean cannot be ignored. The simulated total dust deposition flux on Greenland suggests a possible overestimation of the Saharan dust and an underestimation of the East Asian dust in the Arctic region, which may be a common problem with global dust transport models. Possible reasons for the underestimation of the East Asian dust are discussed.     

First detection of polarization of the submillimeter diffuse Galactic dust emission by Archeops

We present the first determination of the Galactic polarized emission at 353 GHz by Archeops. The data were taken during the Arctic night of February 7, 2002 after the balloon-borne instrument was launched by CNES from the Swedish Esrange base near Kiruna. In addition to the 143 and 217 GHz frequency bands dedicated to CMB studies, Archeops had one 545 GHz and six 353 GHz bolometers mounted in three polarization sensitive pairs that were used for Galactic foreground studies. We present maps of the I,Q,U Stokes parameters over 17% of the sky and with a 13 arcmin resolution at 353 GHz (850 μm). They show a significant Galactic large scale polarized emission coherent on the longitude ranges [100°,120°] and [180°,200°] with a degree of polarization at the level of 4–5%, in agreement with expectations from starlight polarization measurements. Some regions in the Galactic plane (Gem OB1, Cassiopeia) show an even stronger degree of polarization in the range 10–20%. Those findings provide strong evidence for a powerful grain alignment mechanism throughout the interstellar medium and a coherent magnetic field coplanar to the Galactic plane. This magnetic field pervades even some dense clouds. Extrapolated to high Galactic latitude, these results indicate that interstellar dust polarized emission is the major foreground for PLANCK-HFI CMB polarization measurement.     

40Ar/39Ar dating and cosmic‐ray exposure time of desert meteorites: Dhofar 300 and Dhofar 007 eucrites and anomalous achondrite NWA 011

Abstract— We performed high‐resolution ⁴⁰Ar‐³⁹Ar dating of mineral separates and whole‐rock samples from the desert meteorites Dhofar 300, Dhofar 007, and Northwest Africa (NWA) 011. The chronological information of all samples is dominated by plagioclase of varying grain size. The last total reset age of the eucrites Dhofar 300 and Dhofar 007 is 3.9 ± 0.1 Ga, coeval with the intense cratering period on the Moon. Some large plagioclase grains of Dhofar 007 possibly inherited Ar from a 4.5 Ga event characteristic for other cumulate eucrites. Due to disturbances of the age spectrum of NWA 011, only an estimate of 3.2–3.9 Ga can be given for its last total reset age. Secondary events causing partial ⁴⁰Ar loss ≤3.4 Ga ago are indicated by all age spectra. Furthermore, Ar extractions from distinct low temperature phases define apparent isochrons for all samples. These isochron ages are chronologically irrelevant and most probably caused by desert alterations, in which radiogenic ⁴⁰Ar and K from the meteorite and occasionally K induced by weathering are mixed, accompanied by incorporation of atmospheric Ar. Additional uptake of atmospheric Ar by the alteration phase(s) was observed during mineral separation (i.e., crushing and cleaning in ultrasonic baths). Consistent cosmic‐ray exposure ages were obtained from plagioclase and pyroxene exposure age spectra of Dhofar 300 (25 ± 1 Ma) and Dhofar 007 (13 ± 1 Ma) using the mineral's specific target element chemistry and corresponding ³⁸Ar production rates.     

An analysis of Apollo lunar soil samples 12070,889, 12030,187, and 12070,891: Basaltic diversity at the Apollo 12 landing site and implications for classification of small‐sized lunar samples

Lunar mare basalts provide insights into the compositional diversity of the Moon's interior. Basalt fragments from the lunar regolith can potentially sample lava flows from regions of the Moon not previously visited, thus, increasing our understanding of lunar geological evolution. As part of a study of basaltic diversity at the Apollo 12 landing site, detailed petrological and geochemical data are provided here for 13 basaltic chips. In addition to bulk chemistry, we have analyzed the major, minor, and trace element chemistry of mineral phases which highlight differences between basalt groups. Where samples contain olivine, the equilibrium parent melt magnesium number (Mg#; atomic Mg/[Mg + Fe]) can be calculated to estimate parent melt composition. Ilmenite and plagioclase chemistry can also determine differences between basalt groups. We conclude that samples of approximately 1–2 mm in size can be categorized provided that appropriate mineral phases (olivine, plagioclase, and ilmenite) are present. Where samples are fine‐grained (grain size <0.3 mm), a “paired samples t‐test” can provide a statistical comparison between a particular sample and known lunar basalts. Of the fragments analyzed here, three are found to belong to each of the previously identified olivine and ilmenite basalt suites, four to the pigeonite basalt suite, one is an olivine cumulate, and two could not be categorized because of their coarse grain sizes and lack of appropriate mineral phases. Our approach introduces methods that can be used to investigate small sample sizes (i.e., fines) from future sample return missions to investigate lava flow diversity and petrological significance.     

A model of Titan's haze of fractal aerosols constrained by multiple observations

We use Titan's geometric albedo to constrain the vertical distribution of the haze. Microphysical models incorporating fractal aggregates do not readily fit the methane features at 0.62 μm band and the dark 0.88 μm of the albedo spectrum simultaneously. We take advantage of this apparent discrepancy to constrain the haze vertical profile.We used the geometric albedo and several results and constraints from other works to better constrain the vertical haze extinction profile, especially in the low stratosphere. The objective of this model is to give a solution that simultaneously fits the main constraints known to apply to the haze.We find that the haze extinction increases with decreasing altitude with a scale height about equal to the atmospheric scale height down to 100 km. Below this altitude, extinction must decrease down to 30 km. This is necessary in order to have enough haze to sustain a relatively high albedo (0.076) in the dark 0.88 μm methane band and to show the 0.62 μm band in the haze continuum. We set the haze production rate around 7×10⁻¹⁴ kgm⁻² s⁻¹, and the aerosols production altitude around 400 km (or at pressure 1.5 Pa).The physical processes which generate such a profile are not clear. However, purely one-dimensional effects such as condensation, sedimentation, and rainout can be ruled out, and we believe that this relative clearing in Titan's troposphere and lower stratosphere is due to particle horizontal transport by the mean circulation.     

Genesis of the IIICD iron meteorites: Evidence from silicate-bearing inclusions

Abstract— Our studies of the silicate-bearing inclusions in the IIICD iron meteorites Maltahöhe, Carlton and Dayton suggest that their mineralogy and mineral compositions are related to the composition of the metal in the host meteorites. An inclusion in the low-Ni Maltahöhe is similar in mineralogy to those in IAB irons, which contain olivine, pyroxene, plagioclase, graphite and troilite. With increasing Ni concentration of the metal, silicate inclusions become poorer in graphite, richer in phosphates, and the phosphate and silicate assemblages become more complex. Dayton contains pyroxene, plagioclase, SiO₂, brianite, panethite and whitlockite, without graphite. In addition, mafic silicates become more FeO-rich with increasing Ni concentration of the hosts. In contrast, silicates in IAB irons show no such correlation with host Ni concentration, nor do they have the complex mineral assemblages of Dayton. These trends in inclusion composition and mineralogy in IIICD iron meteorites have been established by reactions between the S-rich metallic magma and the silicates, but the physical setting is uncertain. Of the two processes invoked by other authors to account for groups IAB and IIICD, fractional crystallization of S-rich cores and impact generation of melt pools, we prefer core crystallization. However, the absence of relationships between silicate inclusion mineralogy and metal compositions among IAB irons analogous to those that we have discovered in IIICD irons suggests that the IAB and IIICD cores/metallic magmas evolved in rather different ways. We suggest that the solidification of the IIICD core may have been very complex, involving fractional crystallization, nucleation effects and, possibly, liquid immiscibility.     

Mineralogy of Antarctic basaltic shergottite Queen Alexandra Range 94201: Similarities to Elephant Moraine A79001 (Lithology B) martian meteorite

Abstract— Antarctic meteorite QUE 94201 is a new basaltic shergottite that is mainly composed of subequal amounts of maskelynite and pyroxenes (pigeonite and augite) plus abundant merrillite and accessory phases. It also contains impact melt. Complex zoning patterns in QUE 94201 pyroxenes revealed by elemental map analyses using an electron microprobe suggest a crystallization sequence from Mg-rich pigeonite (En₆₂Fss₃₀Wo_g) to extremely Fe-rich pigeonite (En₅Fs₈₁Wo₁₄) via {110} Mg-rich augite bands (En₄₄Fs₂₀Wo₃₆) in a single crystal. These textures, along with the abundant plagioclase (maskelynite), indicates single-stage rapid cooling (>5 °C/year) of this rock from a supercooled magma. Transition from Mg-rich augite to Fe-rich pigeonite reflects the onset of plagioclase crystallization. Enrichment of late-stage phases in QUE 94201 implies crystallization from an evolved magma and suggests a different parent magma composition from the other basaltic shergottites. Lithology B of EETA79001 basaltic shergottite contains pyroxenes that show complex zoning with augite bands similar to those in QUE 94201 pyroxene, which suggests similar one-stage rapid cooling. Lithology B of EETA79001 also resembles QUE 94201 in its coarse-grained texture of silicates and its high abundance of maskelynite, although QUE 94201 probably crystallized from a more fractionated magma. We also note that some Apollo lunar mare basalts (e.g., 12020 and 12021) have similar mineralogy and petrology to QUE 94201, especially in pyroxene zoning. All these basaltic rocks with complex pyroxene zoning suggest rapid metastable crystallization from supercooled magmas.     

Complex origins of silicate veinlets in HED meteorites: A case study of Northwest Africa 1109

We report on the petrography and mineralogy of three types of silicate veinlets in the brecciated eucrite Northwest Africa (NWA) 1109. These include Fe‐rich olivine, Mg‐rich olivine, and pyroxene veinlets. The Fe‐rich olivine veinlets mainly infill fractures in pyroxene and also occur along grain boundaries between pyroxene and plagioclase crystals, in both nonequilibrated and equilibrated lithic clasts. The host pyroxene of Fe‐rich olivine veinlets shows large chemical variations between and within grains. The Fe‐rich olivine veinlets also contain fine‐grained Fe³⁺‐bearing chromite, highly calcic plagioclase, merrillite, apatite, and troilite. Based on texture and mineral chemistry, we argue that the formation of Fe‐rich olivine was related to fluid deposition at relatively high temperatures. However, the source of Fe‐rich olivine in the veinlets remains unclear. Magnesium‐rich olivine veinlets were found in three diogenitic lithic clasts. In one of these, the Mg‐rich olivine veinlets only occur in one of the fine‐grained interstitial regions and extend into fractures within surrounding coarse‐grained orthopyroxene. Based on the texture of the interstitial materials, we suggest that the Mg‐rich olivine veinlets formed by shock‐induced localized melting and recrystallization. Pyroxene veinlets were only observed in one clast where they infill fractures within large plagioclase grains and are associated with fine‐grained pyroxene surrounding coarse‐grained pyroxene. The large chemical variations in pyroxene and the fracture‐filling texture indicate that the pyroxene veinlets might also have formed by shock‐induced localized melting and rapid crystallization. Our study demonstrates that silicate veinlets formed by a range of different surface processes on the surface of Vesta.     

Petrology and shock history of the first depleted-like poikilitic shergottite Asuka 12325

Asuka (A) 12325 is the first poikilitic shergottite having a depleted pattern in light rare earth elements (REE). Compared with known poikilitic shergottites, A 12325 has smaller but more abundant pyroxene oikocrysts with remarkable Fe-rich pigeonite rims, indicating that A 12325 cooled relatively faster at a shallower part of the crust. The redox condition (logfO₂ = IW + 0.6-IW + 1.7) and Fe-rich chemical compositions of each mineral in A 12325 are close to enriched shergottites. The intermediate shergottites could not form by a simple mixing between parent magmas of A 12325 and enriched shergottites. Although A 12325 contains various high-pressure minerals such as majorite and ringwoodite, plagioclase is only partly maskelynitized. Therefore, the maximum shock pressure may be within 17–22 GPa. Thermal conduction and ringwoodite growth calculation around a shock vein revealed that the shock dwell time of A 12325 is at least 40 ms. The weaker shock pressure and longer shock dwell time in A 12325 may be attained by an impact event similar to those of nakhlites and Northwest Africa (NWA) 8159. Such a weak shock ejection event may be as common on Mars as a severe shock event recorded in shergottites. Alteration of sulfide observed in A 12325 may imply the presence of magmatic fluid in its reservoir on Mars. A 12325 expands a chemical variety of Martian rocks and has a unique shock history among poikilitic shergottites while A 12325 also implies that poikilitic shergottites are common rocks on Mars regardless of their sources.     

Carbonates in fractures of Martian meteorite Allan Hills 84001: Petrologic evidence for impact origin

Abstract— Carbonates in Martian meteorite Allan Hills 84001 occur as grains on pyroxene grain boundaries, in crushed zones, and as disks, veins, and irregularly shaped grains in healed pyroxene fractures. Some carbonate disks have tapered Mg-rich edges and are accompanied by smaller, thinner and relatively homogeneous, magnesite microdisks. Except for the microdisks, all types of carbonate grains show the same unique chemical zoning pattern on MgCO₃-FeCO₃-CaCO₃ plots. This chemical characteristic and the close spatial association of diverse carbonate types show that all carbonates formed by a similar process. The heterogeneous distribution of carbonates in fractures, tapered shapes of some disks, and the localized occurrence of Mg-rich microdisks appear to be incompatible with growth from an externally derived CO₂-rich fluid that changed in composition over time. These features suggest instead that the fractures were closed as carbonates grew from an internally derived fluid and that the microdisks formed from a residual Mg-rich fluid that was squeezed along fractures. Carbonate in pyroxene fractures is most abundant near grains of plagioclase glass that are located on pyroxene grain boundaries and commonly contain major or minor amounts of carbonate. We infer that carbonates in fractures formed from grain boundary carbonates associated with plagioclase that were melted by impact and dispersed into the surrounding fractured pyroxene. Carbonates in fractures, which include those studied by McKay et al. (1996), could not have formed at low temperatures and preserved mineralogical evidence for Martian organisms.     

Primary feldspar in the Semarkona LL3.00 chondrite: Constraints on chondrule formation and secondary alteration

Feldspar in ordinary chondrites (OCs) is often associated with thermal metamorphism, as a secondary mineral that forms from the crystallization of matrix and chondrule mesostasis. However, studies of feldspar in equilibrated OCs show that there is a range of plagioclase compositions within chondrules, some of which may be primary products of chondrule crystallization. It is important to recognize primary feldspar within chondrules because it can be used to help understand the secondary effects of thermal metamorphism and aqueous alteration. The presence of primary feldspar also provides important petrologic constraints on chondrule formation time scales. We undertook a careful study of Semarkona (LL3.00) and observed feldspar in 18% of chondrules. The feldspar is plagioclase covering a wide range of compositions (An₂–An₉₉) with little K‐feldspar component (<Or₃). We show that plagioclase is a primary igneous phase, based on grain morphology and compositions consistent with growth from a melt having the bulk compositions of the host chondrules. Based on experimental studies, the presence of plagioclase suggests chondrules cooled slowly at temperatures close to the solidus. We also observed several secondary features consistent with the aqueous alteration. These features include zoning of Na and Ca in plagioclase, heterogeneity in plagioclase compositions in altered chondrules, development of porosity from the dissolution of chondrule glass, and alteration of glass to phyllosilicates. Alteration of major Al‐bearing phases, like plagioclase and glass, has important implications for interpretations of ages derived from Al‐Mg dating of chondrules, if they have been affected by secondary processes.     

Caleta el Cobre 022 Martian meteorite: Increasing nakhlite diversity

Caleta el Cobre (CeC) 022 is a Martian meteorite of the nakhlite group, showing an unbrecciated cumulate texture, composed mainly of clinopyroxene and olivine. Augite shows irregular core zoning, euhedral rims, and thin overgrowths enriched in Fe relative to the core. Low‐Ca pyroxene is found adjacent to olivine. Phenocrysts of Fe‐Ti oxides are titanomagnetite with exsolutions of ilmenite/ulvöspinel. Intercumulus material consists of both coarse plagioclase and fine‐grained mesostasis, comprising K‐feldspars, pyroxene, apatite, ilmenite, Fe‐Ti oxides, and silica. CeC 022 shows a high proportion of Martian aqueous alteration products (iddingsite) in olivine (45.1 vol% of olivine) and mesostasis. This meteorite is the youngest nakhlite with a distinct Sm/Nd crystallization age of 1.215 ± 0.067 Ga. Its ejection age of 11.8 ± 1.8 Ma is similar to other nakhlites. CeC 022 reveals contrasted cooling rates with similarities with faster cooled nakhlites, such as Northwest Africa (NWA) 817, NWA 5790, or Miller Range 03346 nakhlites: augite irregular cores, Fe‐rich overgrowths, fine‐grained K‐feldspars, quenched oxides, and high rare earth element content. CeC 022 also shares similarities with slower cooled nakhlites, including Nakhla and NWA 10153: pyroxene modal abundance, pyroxenes crystal size distribution, average pyroxene size, phenocryst mineral compositions, unzoned olivine, and abundant coarse plagioclase. Moreover, CeC 022 is the most magnetic nakhlite and represents an analog source lithology for the strong magnetization of the Martian crust. With its particular features, CeC 022 must originate from a previously unsampled sill or flow in the same volcanic system as the other nakhlites, increasing Martian sample diversity and our knowledge of nakhlites.